| 1 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-numpy |
|---|
| 2 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-numpy |
|---|
| 3 | DEBUG: OS Platform: darwin |
|---|
| 4 | DEBUG: OS Version: 10.2.0 |
|---|
| 5 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 6 | DEBUG: System Arch: i386 |
|---|
| 7 | DEBUG: setting option os.universal_supported to yes |
|---|
| 8 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 9 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 10 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 11 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl |
|---|
| 12 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 13 | DEBUG: universal variant already exists, so not adding the default one |
|---|
| 14 | DEBUG: Requested variant darwin is not provided by port py26-numpy. |
|---|
| 15 | DEBUG: Requested variant i386 is not provided by port py26-numpy. |
|---|
| 16 | DEBUG: Requested variant macosx is not provided by port py26-numpy. |
|---|
| 17 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python26 |
|---|
| 18 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 19 | DEBUG: python26 2.6.4_0 exists in the ports tree |
|---|
| 20 | DEBUG: python26 2.6.4_0 +darwin+universal is the latest installed |
|---|
| 21 | DEBUG: python26 2.6.4_0 +darwin+universal is active |
|---|
| 22 | DEBUG: Merging existing variants darwin universal into variants |
|---|
| 23 | DEBUG: new fully merged portvariants: universal + |
|---|
| 24 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python26 |
|---|
| 25 | DEBUG: OS Platform: darwin |
|---|
| 26 | DEBUG: OS Version: 10.2.0 |
|---|
| 27 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 28 | DEBUG: System Arch: i386 |
|---|
| 29 | DEBUG: setting option os.universal_supported to yes |
|---|
| 30 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 31 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 32 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 33 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl |
|---|
| 34 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 35 | DEBUG: universal variant already exists, so not adding the default one |
|---|
| 36 | DEBUG: Requested variant i386 is not provided by port python26. |
|---|
| 37 | DEBUG: Requested variant macosx is not provided by port python26. |
|---|
| 38 | DEBUG: Executing variant darwin provides darwin |
|---|
| 39 | DEBUG: Executing variant universal provides universal |
|---|
| 40 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext |
|---|
| 41 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 42 | DEBUG: gettext 0.17_4 exists in the ports tree |
|---|
| 43 | DEBUG: gettext 0.17_4 +universal is the latest installed |
|---|
| 44 | DEBUG: gettext 0.17_4 +universal is active |
|---|
| 45 | DEBUG: Merging existing variants universal into variants |
|---|
| 46 | DEBUG: new fully merged portvariants: universal + |
|---|
| 47 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext |
|---|
| 48 | DEBUG: OS Platform: darwin |
|---|
| 49 | DEBUG: OS Version: 10.2.0 |
|---|
| 50 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 51 | DEBUG: System Arch: i386 |
|---|
| 52 | DEBUG: setting option os.universal_supported to yes |
|---|
| 53 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 54 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 55 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 56 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 57 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 58 | DEBUG: universal variant already exists, so not adding the default one |
|---|
| 59 | DEBUG: Requested variant darwin is not provided by port gettext. |
|---|
| 60 | DEBUG: Requested variant i386 is not provided by port gettext. |
|---|
| 61 | DEBUG: Requested variant macosx is not provided by port gettext. |
|---|
| 62 | DEBUG: Executing variant universal provides universal |
|---|
| 63 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv |
|---|
| 64 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 65 | DEBUG: libiconv 1.13_0 exists in the ports tree |
|---|
| 66 | DEBUG: libiconv 1.13_0 +universal is the latest installed |
|---|
| 67 | DEBUG: libiconv 1.13_0 +universal is active |
|---|
| 68 | DEBUG: Merging existing variants universal into variants |
|---|
| 69 | DEBUG: new fully merged portvariants: universal + |
|---|
| 70 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv |
|---|
| 71 | DEBUG: OS Platform: darwin |
|---|
| 72 | DEBUG: OS Version: 10.2.0 |
|---|
| 73 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 74 | DEBUG: System Arch: i386 |
|---|
| 75 | DEBUG: setting option os.universal_supported to yes |
|---|
| 76 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 77 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 78 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 79 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 80 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 81 | DEBUG: universal variant already exists, so not adding the default one |
|---|
| 82 | DEBUG: Requested variant darwin is not provided by port libiconv. |
|---|
| 83 | DEBUG: Requested variant i386 is not provided by port libiconv. |
|---|
| 84 | DEBUG: Requested variant macosx is not provided by port libiconv. |
|---|
| 85 | DEBUG: Executing variant universal provides universal |
|---|
| 86 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf |
|---|
| 87 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 88 | DEBUG: gperf 3.0.4_0 exists in the ports tree |
|---|
| 89 | DEBUG: gperf 3.0.4_0 +universal is the latest installed |
|---|
| 90 | DEBUG: gperf 3.0.4_0 +universal is active |
|---|
| 91 | DEBUG: Merging existing variants universal into variants |
|---|
| 92 | DEBUG: new fully merged portvariants: universal + |
|---|
| 93 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf |
|---|
| 94 | DEBUG: OS Platform: darwin |
|---|
| 95 | DEBUG: OS Version: 10.2.0 |
|---|
| 96 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 97 | DEBUG: System Arch: i386 |
|---|
| 98 | DEBUG: setting option os.universal_supported to yes |
|---|
| 99 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 100 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 101 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 102 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 103 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 104 | DEBUG: universal variant already exists, so not adding the default one |
|---|
| 105 | DEBUG: Requested variant darwin is not provided by port gperf. |
|---|
| 106 | DEBUG: Requested variant i386 is not provided by port gperf. |
|---|
| 107 | DEBUG: Requested variant macosx is not provided by port gperf. |
|---|
| 108 | DEBUG: Executing variant universal provides universal |
|---|
| 109 | DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0 |
|---|
| 110 | DEBUG: No need to upgrade! libiconv 1.13_0 >= libiconv 1.13_0 |
|---|
| 111 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses |
|---|
| 112 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 113 | DEBUG: ncurses 5.7_0 exists in the ports tree |
|---|
| 114 | DEBUG: ncurses 5.7_0 +darwin_10+universal is the latest installed |
|---|
| 115 | DEBUG: ncurses 5.7_0 +darwin_10+universal is active |
|---|
| 116 | DEBUG: Merging existing variants darwin_10 universal into variants |
|---|
| 117 | DEBUG: new fully merged portvariants: universal + |
|---|
| 118 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses |
|---|
| 119 | DEBUG: OS Platform: darwin |
|---|
| 120 | DEBUG: OS Version: 10.2.0 |
|---|
| 121 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 122 | DEBUG: System Arch: i386 |
|---|
| 123 | DEBUG: setting option os.universal_supported to yes |
|---|
| 124 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 125 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 126 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 127 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 128 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 129 | DEBUG: universal variant already exists, so not adding the default one |
|---|
| 130 | DEBUG: Requested variant darwin is not provided by port ncurses. |
|---|
| 131 | DEBUG: Requested variant i386 is not provided by port ncurses. |
|---|
| 132 | DEBUG: Requested variant macosx is not provided by port ncurses. |
|---|
| 133 | DEBUG: Executing variant universal provides universal |
|---|
| 134 | DEBUG: Executing variant darwin_10 provides darwin_10 |
|---|
| 135 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw |
|---|
| 136 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 137 | DEBUG: ncursesw 5.7_0 exists in the ports tree |
|---|
| 138 | DEBUG: ncursesw 5.7_0 +darwin_10+universal is the latest installed |
|---|
| 139 | DEBUG: ncursesw 5.7_0 +darwin_10+universal is active |
|---|
| 140 | DEBUG: Merging existing variants darwin_10 universal into variants |
|---|
| 141 | DEBUG: new fully merged portvariants: universal + |
|---|
| 142 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw |
|---|
| 143 | DEBUG: OS Platform: darwin |
|---|
| 144 | DEBUG: OS Version: 10.2.0 |
|---|
| 145 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 146 | DEBUG: System Arch: i386 |
|---|
| 147 | DEBUG: setting option os.universal_supported to yes |
|---|
| 148 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 149 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 150 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 151 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 152 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 153 | DEBUG: universal variant already exists, so not adding the default one |
|---|
| 154 | DEBUG: Requested variant darwin is not provided by port ncursesw. |
|---|
| 155 | DEBUG: Requested variant i386 is not provided by port ncursesw. |
|---|
| 156 | DEBUG: Requested variant macosx is not provided by port ncursesw. |
|---|
| 157 | DEBUG: Executing variant universal provides universal |
|---|
| 158 | DEBUG: Executing variant darwin_10 provides darwin_10 |
|---|
| 159 | DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0 |
|---|
| 160 | DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0 |
|---|
| 161 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat |
|---|
| 162 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 163 | DEBUG: expat 2.0.1_0 exists in the ports tree |
|---|
| 164 | DEBUG: expat 2.0.1_0 +universal is the latest installed |
|---|
| 165 | DEBUG: expat 2.0.1_0 +universal is active |
|---|
| 166 | DEBUG: Merging existing variants universal into variants |
|---|
| 167 | DEBUG: new fully merged portvariants: universal + |
|---|
| 168 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat |
|---|
| 169 | DEBUG: OS Platform: darwin |
|---|
| 170 | DEBUG: OS Version: 10.2.0 |
|---|
| 171 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 172 | DEBUG: System Arch: i386 |
|---|
| 173 | DEBUG: setting option os.universal_supported to yes |
|---|
| 174 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 175 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 176 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 177 | DEBUG: adding the default universal variant |
|---|
| 178 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 179 | DEBUG: Requested variant darwin is not provided by port expat. |
|---|
| 180 | DEBUG: Requested variant i386 is not provided by port expat. |
|---|
| 181 | DEBUG: Requested variant macosx is not provided by port expat. |
|---|
| 182 | DEBUG: Executing variant universal provides universal |
|---|
| 183 | DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0 |
|---|
| 184 | DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4 |
|---|
| 185 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib |
|---|
| 186 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 187 | DEBUG: zlib 1.2.3_3 exists in the ports tree |
|---|
| 188 | DEBUG: zlib 1.2.3_3 +universal is the latest installed |
|---|
| 189 | DEBUG: zlib 1.2.3_3 +universal is active |
|---|
| 190 | DEBUG: Merging existing variants universal into variants |
|---|
| 191 | DEBUG: new fully merged portvariants: universal + |
|---|
| 192 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib |
|---|
| 193 | DEBUG: OS Platform: darwin |
|---|
| 194 | DEBUG: OS Version: 10.2.0 |
|---|
| 195 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 196 | DEBUG: System Arch: i386 |
|---|
| 197 | DEBUG: setting option os.universal_supported to yes |
|---|
| 198 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 199 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 200 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 201 | DEBUG: adding the default universal variant |
|---|
| 202 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 203 | DEBUG: Requested variant darwin is not provided by port zlib. |
|---|
| 204 | DEBUG: Requested variant i386 is not provided by port zlib. |
|---|
| 205 | DEBUG: Requested variant macosx is not provided by port zlib. |
|---|
| 206 | DEBUG: Executing variant universal provides universal |
|---|
| 207 | DEBUG: No need to upgrade! zlib 1.2.3_3 >= zlib 1.2.3_3 |
|---|
| 208 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl |
|---|
| 209 | DEBUG: epoch: in tree: 1 installed: 1 |
|---|
| 210 | DEBUG: openssl 0.9.8l_0 exists in the ports tree |
|---|
| 211 | DEBUG: openssl 0.9.8l_0 +darwin+universal is the latest installed |
|---|
| 212 | DEBUG: openssl 0.9.8l_0 +darwin+universal is active |
|---|
| 213 | DEBUG: Merging existing variants darwin universal into variants |
|---|
| 214 | DEBUG: new fully merged portvariants: universal + |
|---|
| 215 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl |
|---|
| 216 | DEBUG: OS Platform: darwin |
|---|
| 217 | DEBUG: OS Version: 10.2.0 |
|---|
| 218 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 219 | DEBUG: System Arch: i386 |
|---|
| 220 | DEBUG: setting option os.universal_supported to yes |
|---|
| 221 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 222 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 223 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 224 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 225 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 226 | DEBUG: universal variant already exists, so not adding the default one |
|---|
| 227 | DEBUG: Requested variant i386 is not provided by port openssl. |
|---|
| 228 | DEBUG: Requested variant macosx is not provided by port openssl. |
|---|
| 229 | DEBUG: Executing variant universal provides universal |
|---|
| 230 | DEBUG: Executing variant darwin provides darwin |
|---|
| 231 | DEBUG: No need to upgrade! openssl 0.9.8l_0 >= openssl 0.9.8l_0 |
|---|
| 232 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/tk |
|---|
| 233 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 234 | DEBUG: tk 8.5.7_0 exists in the ports tree |
|---|
| 235 | DEBUG: tk 8.5.7_0 +darwin+quartz+universal is the latest installed |
|---|
| 236 | DEBUG: tk 8.5.7_0 +darwin+quartz+universal is active |
|---|
| 237 | DEBUG: Merging existing variants darwin quartz universal into variants |
|---|
| 238 | DEBUG: new fully merged portvariants: universal + quartz + |
|---|
| 239 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/tk |
|---|
| 240 | DEBUG: OS Platform: darwin |
|---|
| 241 | DEBUG: OS Version: 10.2.0 |
|---|
| 242 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 243 | DEBUG: System Arch: i386 |
|---|
| 244 | DEBUG: setting option os.universal_supported to yes |
|---|
| 245 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 246 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 247 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 248 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 249 | DEBUG: adding the default universal variant |
|---|
| 250 | DEBUG: Requested variant i386 is not provided by port tk. |
|---|
| 251 | DEBUG: Requested variant macosx is not provided by port tk. |
|---|
| 252 | DEBUG: Executing variant quartz provides quartz |
|---|
| 253 | DEBUG: Executing variant darwin provides darwin |
|---|
| 254 | DEBUG: Executing variant universal provides universal |
|---|
| 255 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig |
|---|
| 256 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 257 | DEBUG: pkgconfig 0.23_1 exists in the ports tree |
|---|
| 258 | DEBUG: pkgconfig 0.23_1 +universal is the latest installed |
|---|
| 259 | DEBUG: pkgconfig 0.23_1 +universal is active |
|---|
| 260 | DEBUG: Merging existing variants universal into variants |
|---|
| 261 | DEBUG: new fully merged portvariants: universal + |
|---|
| 262 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig |
|---|
| 263 | DEBUG: OS Platform: darwin |
|---|
| 264 | DEBUG: OS Version: 10.2.0 |
|---|
| 265 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 266 | DEBUG: System Arch: i386 |
|---|
| 267 | DEBUG: setting option os.universal_supported to yes |
|---|
| 268 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 269 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 270 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 271 | DEBUG: adding the default universal variant |
|---|
| 272 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 273 | DEBUG: Requested variant darwin is not provided by port pkgconfig. |
|---|
| 274 | DEBUG: Requested variant i386 is not provided by port pkgconfig. |
|---|
| 275 | DEBUG: Requested variant macosx is not provided by port pkgconfig. |
|---|
| 276 | DEBUG: Executing variant universal provides universal |
|---|
| 277 | DEBUG: No need to upgrade! pkgconfig 0.23_1 >= pkgconfig 0.23_1 |
|---|
| 278 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/tcl |
|---|
| 279 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 280 | DEBUG: tcl 8.5.7_1 exists in the ports tree |
|---|
| 281 | DEBUG: tcl 8.5.7_1 +darwin+universal is the latest installed |
|---|
| 282 | DEBUG: tcl 8.5.7_1 +darwin+universal is active |
|---|
| 283 | DEBUG: Merging existing variants darwin universal into variants |
|---|
| 284 | DEBUG: new fully merged portvariants: universal + |
|---|
| 285 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/tcl |
|---|
| 286 | DEBUG: OS Platform: darwin |
|---|
| 287 | DEBUG: OS Version: 10.2.0 |
|---|
| 288 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 289 | DEBUG: System Arch: i386 |
|---|
| 290 | DEBUG: setting option os.universal_supported to yes |
|---|
| 291 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 292 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 293 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 294 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 295 | DEBUG: adding the default universal variant |
|---|
| 296 | DEBUG: Requested variant i386 is not provided by port tcl. |
|---|
| 297 | DEBUG: Requested variant macosx is not provided by port tcl. |
|---|
| 298 | DEBUG: Executing variant darwin provides darwin |
|---|
| 299 | DEBUG: Executing variant universal provides universal |
|---|
| 300 | DEBUG: No need to upgrade! tcl 8.5.7_1 >= tcl 8.5.7_1 |
|---|
| 301 | DEBUG: No need to upgrade! tk 8.5.7_0 >= tk 8.5.7_0 |
|---|
| 302 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3 |
|---|
| 303 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 304 | DEBUG: sqlite3 3.6.20_0 exists in the ports tree |
|---|
| 305 | DEBUG: sqlite3 3.6.20_0 +universal is the latest installed |
|---|
| 306 | DEBUG: sqlite3 3.6.20_0 +universal is active |
|---|
| 307 | DEBUG: Merging existing variants universal into variants |
|---|
| 308 | DEBUG: new fully merged portvariants: universal + |
|---|
| 309 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3 |
|---|
| 310 | DEBUG: OS Platform: darwin |
|---|
| 311 | DEBUG: OS Version: 10.2.0 |
|---|
| 312 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 313 | DEBUG: System Arch: i386 |
|---|
| 314 | DEBUG: setting option os.universal_supported to yes |
|---|
| 315 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 316 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 317 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 318 | DEBUG: adding the default universal variant |
|---|
| 319 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 320 | DEBUG: Requested variant darwin is not provided by port sqlite3. |
|---|
| 321 | DEBUG: Requested variant i386 is not provided by port sqlite3. |
|---|
| 322 | DEBUG: Requested variant macosx is not provided by port sqlite3. |
|---|
| 323 | DEBUG: Executing variant universal provides universal |
|---|
| 324 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline |
|---|
| 325 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 326 | DEBUG: readline 6.0.000_2 exists in the ports tree |
|---|
| 327 | DEBUG: readline 6.0.000_2 +darwin+universal is the latest installed |
|---|
| 328 | DEBUG: readline 6.0.000_2 +darwin+universal is active |
|---|
| 329 | DEBUG: Merging existing variants darwin universal into variants |
|---|
| 330 | DEBUG: new fully merged portvariants: universal + |
|---|
| 331 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline |
|---|
| 332 | DEBUG: OS Platform: darwin |
|---|
| 333 | DEBUG: OS Version: 10.2.0 |
|---|
| 334 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 335 | DEBUG: System Arch: i386 |
|---|
| 336 | DEBUG: setting option os.universal_supported to yes |
|---|
| 337 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 338 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 339 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 340 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 341 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 342 | DEBUG: universal variant already exists, so not adding the default one |
|---|
| 343 | DEBUG: Requested variant i386 is not provided by port readline. |
|---|
| 344 | DEBUG: Requested variant macosx is not provided by port readline. |
|---|
| 345 | DEBUG: Executing variant universal provides universal |
|---|
| 346 | DEBUG: Executing variant darwin provides darwin |
|---|
| 347 | DEBUG: No need to upgrade! readline 6.0.000_2 >= readline 6.0.000_2 |
|---|
| 348 | DEBUG: No need to upgrade! sqlite3 3.6.20_0 >= sqlite3 3.6.20_0 |
|---|
| 349 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46 |
|---|
| 350 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 351 | DEBUG: db46 4.6.21_6 exists in the ports tree |
|---|
| 352 | DEBUG: db46 4.6.21_6 +universal is the latest installed |
|---|
| 353 | DEBUG: db46 4.6.21_6 +universal is active |
|---|
| 354 | DEBUG: Merging existing variants universal into variants |
|---|
| 355 | DEBUG: new fully merged portvariants: universal + |
|---|
| 356 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46 |
|---|
| 357 | DEBUG: OS Platform: darwin |
|---|
| 358 | DEBUG: OS Version: 10.2.0 |
|---|
| 359 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 360 | DEBUG: System Arch: i386 |
|---|
| 361 | DEBUG: setting option os.universal_supported to yes |
|---|
| 362 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 363 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 364 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 365 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 366 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 367 | DEBUG: universal variant already exists, so not adding the default one |
|---|
| 368 | DEBUG: Requested variant darwin is not provided by port db46. |
|---|
| 369 | DEBUG: Requested variant i386 is not provided by port db46. |
|---|
| 370 | DEBUG: Requested variant macosx is not provided by port db46. |
|---|
| 371 | DEBUG: Executing variant universal provides universal |
|---|
| 372 | DEBUG: No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6 |
|---|
| 373 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm |
|---|
| 374 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 375 | DEBUG: gdbm 1.8.3_1 exists in the ports tree |
|---|
| 376 | DEBUG: gdbm 1.8.3_1 +universal is the latest installed |
|---|
| 377 | DEBUG: gdbm 1.8.3_1 +universal is active |
|---|
| 378 | DEBUG: Merging existing variants universal into variants |
|---|
| 379 | DEBUG: new fully merged portvariants: universal + |
|---|
| 380 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm |
|---|
| 381 | DEBUG: OS Platform: darwin |
|---|
| 382 | DEBUG: OS Version: 10.2.0 |
|---|
| 383 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 384 | DEBUG: System Arch: i386 |
|---|
| 385 | DEBUG: setting option os.universal_supported to yes |
|---|
| 386 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 387 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 388 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 389 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 390 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 391 | DEBUG: universal variant already exists, so not adding the default one |
|---|
| 392 | DEBUG: Requested variant darwin is not provided by port gdbm. |
|---|
| 393 | DEBUG: Requested variant i386 is not provided by port gdbm. |
|---|
| 394 | DEBUG: Requested variant macosx is not provided by port gdbm. |
|---|
| 395 | DEBUG: Executing variant universal provides universal |
|---|
| 396 | DEBUG: No need to upgrade! gdbm 1.8.3_1 >= gdbm 1.8.3_1 |
|---|
| 397 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2 |
|---|
| 398 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 399 | DEBUG: bzip2 1.0.5_3 exists in the ports tree |
|---|
| 400 | DEBUG: bzip2 1.0.5_3 +darwin+universal is the latest installed |
|---|
| 401 | DEBUG: bzip2 1.0.5_3 +darwin+universal is active |
|---|
| 402 | DEBUG: Merging existing variants darwin universal into variants |
|---|
| 403 | DEBUG: new fully merged portvariants: universal + |
|---|
| 404 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2 |
|---|
| 405 | DEBUG: OS Platform: darwin |
|---|
| 406 | DEBUG: OS Version: 10.2.0 |
|---|
| 407 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 408 | DEBUG: System Arch: i386 |
|---|
| 409 | DEBUG: setting option os.universal_supported to yes |
|---|
| 410 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 411 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 412 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 413 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 414 | DEBUG: universal variant already exists, so not adding the default one |
|---|
| 415 | DEBUG: Requested variant i386 is not provided by port bzip2. |
|---|
| 416 | DEBUG: Requested variant macosx is not provided by port bzip2. |
|---|
| 417 | DEBUG: Executing variant darwin provides darwin |
|---|
| 418 | DEBUG: Executing variant universal provides universal |
|---|
| 419 | DEBUG: No need to upgrade! bzip2 1.0.5_3 >= bzip2 1.0.5_3 |
|---|
| 420 | DEBUG: No need to upgrade! python26 2.6.4_0 >= python26 2.6.4_0 |
|---|
| 421 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/math/fftw-3 |
|---|
| 422 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 423 | DEBUG: fftw-3 3.2.2_0 exists in the ports tree |
|---|
| 424 | DEBUG: fftw-3 3.2.2_0 +i386+universal is the latest installed |
|---|
| 425 | DEBUG: fftw-3 3.2.2_0 +i386+universal is active |
|---|
| 426 | DEBUG: Merging existing variants i386 universal into variants |
|---|
| 427 | DEBUG: new fully merged portvariants: universal + |
|---|
| 428 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/math/fftw-3 |
|---|
| 429 | DEBUG: OS Platform: darwin |
|---|
| 430 | DEBUG: OS Version: 10.2.0 |
|---|
| 431 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 432 | DEBUG: System Arch: i386 |
|---|
| 433 | DEBUG: setting option os.universal_supported to yes |
|---|
| 434 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 435 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 436 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 437 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 438 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 439 | DEBUG: universal variant already exists, so not adding the default one |
|---|
| 440 | DEBUG: Requested variant darwin is not provided by port fftw-3. |
|---|
| 441 | DEBUG: Requested variant macosx is not provided by port fftw-3. |
|---|
| 442 | DEBUG: Executing variant universal provides universal |
|---|
| 443 | DEBUG: Executing variant i386 provides i386 |
|---|
| 444 | DEBUG: No need to upgrade! fftw-3 3.2.2_0 >= fftw-3 3.2.2_0 |
|---|
| 445 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-nose |
|---|
| 446 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 447 | DEBUG: py26-nose 0.11.1_0 exists in the ports tree |
|---|
| 448 | DEBUG: py26-nose 0.11.1_0 is the latest installed |
|---|
| 449 | DEBUG: py26-nose 0.11.1_0 is active |
|---|
| 450 | DEBUG: Merging existing variants into variants |
|---|
| 451 | DEBUG: new fully merged portvariants: |
|---|
| 452 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-nose |
|---|
| 453 | DEBUG: OS Platform: darwin |
|---|
| 454 | DEBUG: OS Version: 10.2.0 |
|---|
| 455 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 456 | DEBUG: System Arch: i386 |
|---|
| 457 | DEBUG: setting option os.universal_supported to yes |
|---|
| 458 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 459 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 460 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 461 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl |
|---|
| 462 | DEBUG: not using configure, so not adding the default universal variant |
|---|
| 463 | DEBUG: Requested variant darwin is not provided by port py26-nose. |
|---|
| 464 | DEBUG: Requested variant i386 is not provided by port py26-nose. |
|---|
| 465 | DEBUG: Requested variant macosx is not provided by port py26-nose. |
|---|
| 466 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-setuptools |
|---|
| 467 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 468 | DEBUG: py26-setuptools 0.6c11_0 exists in the ports tree |
|---|
| 469 | DEBUG: py26-setuptools 0.6c11_0 is the latest installed |
|---|
| 470 | DEBUG: py26-setuptools 0.6c11_0 is active |
|---|
| 471 | DEBUG: Merging existing variants into variants |
|---|
| 472 | DEBUG: new fully merged portvariants: |
|---|
| 473 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-setuptools |
|---|
| 474 | DEBUG: OS Platform: darwin |
|---|
| 475 | DEBUG: OS Version: 10.2.0 |
|---|
| 476 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 477 | DEBUG: System Arch: i386 |
|---|
| 478 | DEBUG: setting option os.universal_supported to yes |
|---|
| 479 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 480 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 481 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 482 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl |
|---|
| 483 | DEBUG: not using configure, so not adding the default universal variant |
|---|
| 484 | DEBUG: Requested variant darwin is not provided by port py26-setuptools. |
|---|
| 485 | DEBUG: Requested variant i386 is not provided by port py26-setuptools. |
|---|
| 486 | DEBUG: Requested variant macosx is not provided by port py26-setuptools. |
|---|
| 487 | DEBUG: No need to upgrade! py26-setuptools 0.6c11_0 >= py26-setuptools 0.6c11_0 |
|---|
| 488 | DEBUG: No need to upgrade! py26-nose 0.11.1_0 >= py26-nose 0.11.1_0 |
|---|
| 489 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/math/atlas |
|---|
| 490 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 491 | DEBUG: atlas 3.8.3_1 exists in the ports tree |
|---|
| 492 | DEBUG: atlas 3.8.3_1 is the latest installed |
|---|
| 493 | DEBUG: atlas 3.8.3_1 is active |
|---|
| 494 | DEBUG: Merging existing variants into variants |
|---|
| 495 | DEBUG: new fully merged portvariants: |
|---|
| 496 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/math/atlas |
|---|
| 497 | DEBUG: OS Platform: darwin |
|---|
| 498 | DEBUG: OS Version: 10.2.0 |
|---|
| 499 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 500 | DEBUG: System Arch: i386 |
|---|
| 501 | DEBUG: setting option os.universal_supported to yes |
|---|
| 502 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 503 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 504 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 505 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
|---|
| 506 | DEBUG: Requested variant darwin is not provided by port atlas. |
|---|
| 507 | DEBUG: Requested variant i386 is not provided by port atlas. |
|---|
| 508 | DEBUG: Requested variant macosx is not provided by port atlas. |
|---|
| 509 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/gcc43 |
|---|
| 510 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 511 | DEBUG: gcc43 4.3.4_0 exists in the ports tree |
|---|
| 512 | DEBUG: gcc43 4.3.4_0 is the latest installed |
|---|
| 513 | DEBUG: gcc43 4.3.4_0 is active |
|---|
| 514 | DEBUG: Merging existing variants into variants |
|---|
| 515 | DEBUG: new fully merged portvariants: |
|---|
| 516 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/gcc43 |
|---|
| 517 | DEBUG: OS Platform: darwin |
|---|
| 518 | DEBUG: OS Version: 10.2.0 |
|---|
| 519 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 520 | DEBUG: System Arch: i386 |
|---|
| 521 | DEBUG: setting option os.universal_supported to yes |
|---|
| 522 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 523 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 524 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 525 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 526 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
|---|
| 527 | DEBUG: Requested variant darwin is not provided by port gcc43. |
|---|
| 528 | DEBUG: Requested variant i386 is not provided by port gcc43. |
|---|
| 529 | DEBUG: Requested variant macosx is not provided by port gcc43. |
|---|
| 530 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmp |
|---|
| 531 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 532 | DEBUG: gmp 4.3.1_1 exists in the ports tree |
|---|
| 533 | DEBUG: gmp 4.3.1_1 +universal is the latest installed |
|---|
| 534 | DEBUG: gmp 4.3.1_1 +universal is active |
|---|
| 535 | DEBUG: Merging existing variants universal into variants |
|---|
| 536 | DEBUG: new fully merged portvariants: universal + |
|---|
| 537 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmp |
|---|
| 538 | DEBUG: OS Platform: darwin |
|---|
| 539 | DEBUG: OS Version: 10.2.0 |
|---|
| 540 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 541 | DEBUG: System Arch: i386 |
|---|
| 542 | DEBUG: setting option os.universal_supported to yes |
|---|
| 543 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 544 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 545 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 546 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 547 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 548 | DEBUG: universal variant already exists, so not adding the default one |
|---|
| 549 | DEBUG: Requested variant darwin is not provided by port gmp. |
|---|
| 550 | DEBUG: Requested variant i386 is not provided by port gmp. |
|---|
| 551 | DEBUG: Requested variant macosx is not provided by port gmp. |
|---|
| 552 | DEBUG: Executing variant universal provides universal |
|---|
| 553 | DEBUG: No need to upgrade! gmp 4.3.1_1 >= gmp 4.3.1_1 |
|---|
| 554 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/mpfr |
|---|
| 555 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 556 | DEBUG: mpfr 2.4.1-p4_1 exists in the ports tree |
|---|
| 557 | DEBUG: mpfr 2.4.1-p4_1 +universal is the latest installed |
|---|
| 558 | DEBUG: mpfr 2.4.1-p4_1 +universal is active |
|---|
| 559 | DEBUG: Merging existing variants universal into variants |
|---|
| 560 | DEBUG: new fully merged portvariants: universal + |
|---|
| 561 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/mpfr |
|---|
| 562 | DEBUG: OS Platform: darwin |
|---|
| 563 | DEBUG: OS Version: 10.2.0 |
|---|
| 564 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 565 | DEBUG: System Arch: i386 |
|---|
| 566 | DEBUG: setting option os.universal_supported to yes |
|---|
| 567 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 568 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 569 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 570 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 571 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 572 | DEBUG: universal variant already exists, so not adding the default one |
|---|
| 573 | DEBUG: Requested variant darwin is not provided by port mpfr. |
|---|
| 574 | DEBUG: Requested variant i386 is not provided by port mpfr. |
|---|
| 575 | DEBUG: Requested variant macosx is not provided by port mpfr. |
|---|
| 576 | DEBUG: Executing variant universal provides universal |
|---|
| 577 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/lzmautils |
|---|
| 578 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 579 | DEBUG: lzmautils 4.32.7_1 exists in the ports tree |
|---|
| 580 | DEBUG: lzmautils 4.32.7_1 +universal is the latest installed |
|---|
| 581 | DEBUG: lzmautils 4.32.7_1 +universal is active |
|---|
| 582 | DEBUG: Merging existing variants universal into variants |
|---|
| 583 | DEBUG: new fully merged portvariants: universal + |
|---|
| 584 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/lzmautils |
|---|
| 585 | DEBUG: OS Platform: darwin |
|---|
| 586 | DEBUG: OS Version: 10.2.0 |
|---|
| 587 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 588 | DEBUG: System Arch: i386 |
|---|
| 589 | DEBUG: setting option os.universal_supported to yes |
|---|
| 590 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 591 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 592 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 593 | DEBUG: adding the default universal variant |
|---|
| 594 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 595 | DEBUG: Requested variant darwin is not provided by port lzmautils. |
|---|
| 596 | DEBUG: Requested variant i386 is not provided by port lzmautils. |
|---|
| 597 | DEBUG: Requested variant macosx is not provided by port lzmautils. |
|---|
| 598 | DEBUG: Executing variant universal provides universal |
|---|
| 599 | DEBUG: No need to upgrade! lzmautils 4.32.7_1 >= lzmautils 4.32.7_1 |
|---|
| 600 | DEBUG: No need to upgrade! mpfr 2.4.1-p4_1 >= mpfr 2.4.1-p4_1 |
|---|
| 601 | DEBUG: No need to upgrade! gcc43 4.3.4_0 >= gcc43 4.3.4_0 |
|---|
| 602 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/gzip |
|---|
| 603 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 604 | DEBUG: gzip 1.3.12_0 exists in the ports tree |
|---|
| 605 | DEBUG: gzip 1.3.12_0 +universal is the latest installed |
|---|
| 606 | DEBUG: gzip 1.3.12_0 +universal is active |
|---|
| 607 | DEBUG: Merging existing variants universal into variants |
|---|
| 608 | DEBUG: new fully merged portvariants: universal + |
|---|
| 609 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/gzip |
|---|
| 610 | DEBUG: OS Platform: darwin |
|---|
| 611 | DEBUG: OS Version: 10.2.0 |
|---|
| 612 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 613 | DEBUG: System Arch: i386 |
|---|
| 614 | DEBUG: setting option os.universal_supported to yes |
|---|
| 615 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 616 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 617 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 618 | DEBUG: adding the default universal variant |
|---|
| 619 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 620 | DEBUG: Requested variant darwin is not provided by port gzip. |
|---|
| 621 | DEBUG: Requested variant i386 is not provided by port gzip. |
|---|
| 622 | DEBUG: Requested variant macosx is not provided by port gzip. |
|---|
| 623 | DEBUG: Executing variant universal provides universal |
|---|
| 624 | DEBUG: No need to upgrade! gzip 1.3.12_0 >= gzip 1.3.12_0 |
|---|
| 625 | DEBUG: No need to upgrade! atlas 3.8.3_1 >= atlas 3.8.3_1 |
|---|
| 626 | ---> Computing dependencies for py26-numpy |
|---|
| 627 | DEBUG: Searching for dependency: python26 |
|---|
| 628 | DEBUG: Found Dependency: receipt exists for python26 |
|---|
| 629 | DEBUG: Searching for dependency: fftw-3 |
|---|
| 630 | DEBUG: Found Dependency: receipt exists for fftw-3 |
|---|
| 631 | DEBUG: Searching for dependency: py26-nose |
|---|
| 632 | DEBUG: Found Dependency: receipt exists for py26-nose |
|---|
| 633 | DEBUG: Searching for dependency: atlas |
|---|
| 634 | DEBUG: Found Dependency: receipt exists for atlas |
|---|
| 635 | DEBUG: Searching for dependency: gcc43 |
|---|
| 636 | DEBUG: Found Dependency: receipt exists for gcc43 |
|---|
| 637 | DEBUG: Executing org.macports.main (py26-numpy) |
|---|
| 638 | DEBUG: Skipping completed org.macports.fetch (py26-numpy) |
|---|
| 639 | DEBUG: Skipping completed org.macports.checksum (py26-numpy) |
|---|
| 640 | DEBUG: Skipping completed org.macports.extract (py26-numpy) |
|---|
| 641 | DEBUG: Skipping completed org.macports.patch (py26-numpy) |
|---|
| 642 | DEBUG: Skipping completed org.macports.configure (py26-numpy) |
|---|
| 643 | ---> Building py26-numpy |
|---|
| 644 | DEBUG: Executing org.macports.build (py26-numpy) |
|---|
| 645 | DEBUG: Environment: LAPACK='/opt/local/lib' MACOSX_DEPLOYMENT_TARGET='10.6' ATLAS='/opt/local/lib' BLAS='/opt/local/lib' CC='/opt/local/bin/gcc-mp-4.3' CXX='/opt/local/bin/g++-mp-4.3' |
|---|
| 646 | DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-numpy/work/numpy-1.3.0" && /opt/local/Library/Frameworks/Python.framework/Versions/2.6/bin/python2.6 setup.py --no-user-cfg build' |
|---|
| 647 | Running from numpy source directory. |
|---|
| 648 | non-existing path in 'numpy/distutils': 'site.cfg' |
|---|
| 649 | F2PY Version 2 |
|---|
| 650 | blas_opt_info: |
|---|
| 651 | blas_mkl_info: |
|---|
| 652 | libraries mkl,vml,guide not found in /opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib |
|---|
| 653 | libraries mkl,vml,guide not found in /usr/local/lib |
|---|
| 654 | libraries mkl,vml,guide not found in /usr/lib |
|---|
| 655 | libraries mkl,vml,guide not found in /opt/local/lib |
|---|
| 656 | NOT AVAILABLE |
|---|
| 657 | |
|---|
| 658 | atlas_blas_threads_info: |
|---|
| 659 | Setting PTATLAS=ATLAS |
|---|
| 660 | Setting PTATLAS=ATLAS |
|---|
| 661 | Setting PTATLAS=ATLAS |
|---|
| 662 | FOUND: |
|---|
| 663 | libraries = ['ptf77blas', 'ptcblas', 'atlas'] |
|---|
| 664 | library_dirs = ['/opt/local/lib'] |
|---|
| 665 | language = c |
|---|
| 666 | include_dirs = ['/opt/local/include'] |
|---|
| 667 | |
|---|
| 668 | /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-numpy/work/numpy-1.3.0/numpy/distutils/command/config.py:361: DeprecationWarning: |
|---|
| 669 | +++++++++++++++++++++++++++++++++++++++++++++++++ |
|---|
| 670 | Usage of get_output is deprecated: please do not |
|---|
| 671 | use it anymore, and avoid configuration checks |
|---|
| 672 | involving running executable on the target machine. |
|---|
| 673 | +++++++++++++++++++++++++++++++++++++++++++++++++ |
|---|
| 674 | |
|---|
| 675 | DeprecationWarning) |
|---|
| 676 | customize NAGFCompiler |
|---|
| 677 | Could not locate executable f95 |
|---|
| 678 | customize AbsoftFCompiler |
|---|
| 679 | Could not locate executable f90 |
|---|
| 680 | Could not locate executable f77 |
|---|
| 681 | customize IBMFCompiler |
|---|
| 682 | Could not locate executable xlf90 |
|---|
| 683 | Could not locate executable xlf |
|---|
| 684 | customize IntelFCompiler |
|---|
| 685 | Could not locate executable ifort |
|---|
| 686 | Could not locate executable ifc |
|---|
| 687 | customize GnuFCompiler |
|---|
| 688 | Could not locate executable g77 |
|---|
| 689 | customize Gnu95FCompiler |
|---|
| 690 | Could not locate executable gfortran |
|---|
| 691 | customize G95FCompiler |
|---|
| 692 | Could not locate executable g95 |
|---|
| 693 | don't know how to compile Fortran code on platform 'posix' |
|---|
| 694 | compiling '_configtest.c': |
|---|
| 695 | |
|---|
| 696 | /* This file is generated from numpy/distutils/system_info.py */ |
|---|
| 697 | void ATL_buildinfo(void); |
|---|
| 698 | int main(void) { |
|---|
| 699 | ATL_buildinfo(); |
|---|
| 700 | return 0; |
|---|
| 701 | } |
|---|
| 702 | C compiler: /opt/local/bin/gcc-mp-4.3 -arch x86_64 -arch i386 -isysroot / -fno-strict-aliasing -fno-common -dynamic -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes |
|---|
| 703 | |
|---|
| 704 | compile options: '-c' |
|---|
| 705 | gcc-mp-4.3: _configtest.c |
|---|
| 706 | cc1: error: unrecognized command line option "-arch" |
|---|
| 707 | cc1: error: unrecognized command line option "-arch" |
|---|
| 708 | cc1: error: unrecognized command line option "-arch" |
|---|
| 709 | cc1: error: unrecognized command line option "-arch" |
|---|
| 710 | failure. |
|---|
| 711 | removing: _configtest.c _configtest.o |
|---|
| 712 | Status: 255 |
|---|
| 713 | Output: |
|---|
| 714 | FOUND: |
|---|
| 715 | libraries = ['ptf77blas', 'ptcblas', 'atlas'] |
|---|
| 716 | library_dirs = ['/opt/local/lib'] |
|---|
| 717 | language = c |
|---|
| 718 | define_macros = [('NO_ATLAS_INFO', 2)] |
|---|
| 719 | include_dirs = ['/opt/local/include'] |
|---|
| 720 | |
|---|
| 721 | lapack_opt_info: |
|---|
| 722 | lapack_mkl_info: |
|---|
| 723 | mkl_info: |
|---|
| 724 | libraries mkl,vml,guide not found in /opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib |
|---|
| 725 | libraries mkl,vml,guide not found in /usr/local/lib |
|---|
| 726 | libraries mkl,vml,guide not found in /usr/lib |
|---|
| 727 | libraries mkl,vml,guide not found in /opt/local/lib |
|---|
| 728 | NOT AVAILABLE |
|---|
| 729 | |
|---|
| 730 | NOT AVAILABLE |
|---|
| 731 | |
|---|
| 732 | atlas_threads_info: |
|---|
| 733 | Setting PTATLAS=ATLAS |
|---|
| 734 | libraries lapack_atlas not found in /opt/local/lib |
|---|
| 735 | numpy.distutils.system_info.atlas_threads_info |
|---|
| 736 | Setting PTATLAS=ATLAS |
|---|
| 737 | Setting PTATLAS=ATLAS |
|---|
| 738 | FOUND: |
|---|
| 739 | libraries = ['lapack', 'ptf77blas', 'ptcblas', 'atlas'] |
|---|
| 740 | library_dirs = ['/opt/local/lib'] |
|---|
| 741 | language = f77 |
|---|
| 742 | include_dirs = ['/opt/local/include'] |
|---|
| 743 | |
|---|
| 744 | customize NAGFCompiler |
|---|
| 745 | customize AbsoftFCompiler |
|---|
| 746 | customize IBMFCompiler |
|---|
| 747 | customize IntelFCompiler |
|---|
| 748 | customize GnuFCompiler |
|---|
| 749 | customize Gnu95FCompiler |
|---|
| 750 | customize G95FCompiler |
|---|
| 751 | don't know how to compile Fortran code on platform 'posix' |
|---|
| 752 | compiling '_configtest.c': |
|---|
| 753 | |
|---|
| 754 | /* This file is generated from numpy/distutils/system_info.py */ |
|---|
| 755 | void ATL_buildinfo(void); |
|---|
| 756 | int main(void) { |
|---|
| 757 | ATL_buildinfo(); |
|---|
| 758 | return 0; |
|---|
| 759 | } |
|---|
| 760 | C compiler: /opt/local/bin/gcc-mp-4.3 -arch x86_64 -arch i386 -isysroot / -fno-strict-aliasing -fno-common -dynamic -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes |
|---|
| 761 | |
|---|
| 762 | compile options: '-c' |
|---|
| 763 | gcc-mp-4.3: _configtest.c |
|---|
| 764 | cc1: error: unrecognized command line option "-arch" |
|---|
| 765 | cc1: error: unrecognized command line option "-arch" |
|---|
| 766 | cc1: error: unrecognized command line option "-arch" |
|---|
| 767 | cc1: error: unrecognized command line option "-arch" |
|---|
| 768 | failure. |
|---|
| 769 | removing: _configtest.c _configtest.o |
|---|
| 770 | Status: 255 |
|---|
| 771 | Output: |
|---|
| 772 | FOUND: |
|---|
| 773 | libraries = ['lapack', 'ptf77blas', 'ptcblas', 'atlas'] |
|---|
| 774 | library_dirs = ['/opt/local/lib'] |
|---|
| 775 | language = f77 |
|---|
| 776 | define_macros = [('NO_ATLAS_INFO', 2)] |
|---|
| 777 | include_dirs = ['/opt/local/include'] |
|---|
| 778 | |
|---|
| 779 | running build |
|---|
| 780 | running config_cc |
|---|
| 781 | unifing config_cc, config, build_clib, build_ext, build commands --compiler options |
|---|
| 782 | running config_fc |
|---|
| 783 | unifing config_fc, config, build_clib, build_ext, build commands --fcompiler options |
|---|
| 784 | running build_src |
|---|
| 785 | building py_modules sources |
|---|
| 786 | building library "npymath" sources |
|---|
| 787 | building extension "numpy.core._sort" sources |
|---|
| 788 | Generating build/src.macosx-10.6-intel-2.6/numpy/core/include/numpy/config.h |
|---|
| 789 | customize NAGFCompiler |
|---|
| 790 | customize AbsoftFCompiler |
|---|
| 791 | customize IBMFCompiler |
|---|
| 792 | customize IntelFCompiler |
|---|
| 793 | customize GnuFCompiler |
|---|
| 794 | customize Gnu95FCompiler |
|---|
| 795 | customize G95FCompiler |
|---|
| 796 | don't know how to compile Fortran code on platform 'posix' |
|---|
| 797 | customize NAGFCompiler |
|---|
| 798 | customize AbsoftFCompiler |
|---|
| 799 | customize IBMFCompiler |
|---|
| 800 | customize IntelFCompiler |
|---|
| 801 | customize GnuFCompiler |
|---|
| 802 | customize Gnu95FCompiler |
|---|
| 803 | customize G95FCompiler |
|---|
| 804 | don't know how to compile Fortran code on platform 'posix' |
|---|
| 805 | C compiler: /opt/local/bin/gcc-mp-4.3 -arch x86_64 -arch i386 -isysroot / -fno-strict-aliasing -fno-common -dynamic -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes |
|---|
| 806 | |
|---|
| 807 | compile options: '-Inumpy/core/src -Inumpy/core/include -I/opt/local/Library/Frameworks/Python.framework/Versions/2.6/include/python2.6 -c' |
|---|
| 808 | gcc-mp-4.3: _configtest.c |
|---|
| 809 | cc1: error: unrecognized command line option "-arch" |
|---|
| 810 | cc1: error: unrecognized command line option "-arch" |
|---|
| 811 | cc1: error: unrecognized command line option "-arch" |
|---|
| 812 | cc1: error: unrecognized command line option "-arch" |
|---|
| 813 | failure. |
|---|
| 814 | removing: _configtest.c _configtest.o |
|---|
| 815 | Traceback (most recent call last): |
|---|
| 816 | File "setup.py", line 172, in <module> |
|---|
| 817 | setup_package() |
|---|
| 818 | File "setup.py", line 165, in setup_package |
|---|
| 819 | configuration=configuration ) |
|---|
| 820 | File "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-numpy/work/numpy-1.3.0/numpy/distutils/core.py", line 184, in setup |
|---|
| 821 | return old_setup(**new_attr) |
|---|
| 822 | File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/distutils/core.py", line 152, in setup |
|---|
| 823 | dist.run_commands() |
|---|
| 824 | File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/distutils/dist.py", line 987, in run_commands |
|---|
| 825 | self.run_command(cmd) |
|---|
| 826 | File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/distutils/dist.py", line 1007, in run_command |
|---|
| 827 | cmd_obj.run() |
|---|
| 828 | File "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-numpy/work/numpy-1.3.0/numpy/distutils/command/build.py", line 37, in run |
|---|
| 829 | old_build.run(self) |
|---|
| 830 | File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/distutils/command/build.py", line 134, in run |
|---|
| 831 | self.run_command(cmd_name) |
|---|
| 832 | File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/distutils/cmd.py", line 333, in run_command |
|---|
| 833 | self.distribution.run_command(command) |
|---|
| 834 | File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/distutils/dist.py", line 1007, in run_command |
|---|
| 835 | cmd_obj.run() |
|---|
| 836 | File "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-numpy/work/numpy-1.3.0/numpy/distutils/command/build_src.py", line 130, in run |
|---|
| 837 | self.build_sources() |
|---|
| 838 | File "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-numpy/work/numpy-1.3.0/numpy/distutils/command/build_src.py", line 147, in build_sources |
|---|
| 839 | self.build_extension_sources(ext) |
|---|
| 840 | File "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-numpy/work/numpy-1.3.0/numpy/distutils/command/build_src.py", line 250, in build_extension_sources |
|---|
| 841 | sources = self.generate_sources(sources, ext) |
|---|
| 842 | File "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-numpy/work/numpy-1.3.0/numpy/distutils/command/build_src.py", line 307, in generate_sources |
|---|
| 843 | source = func(extension, build_dir) |
|---|
| 844 | File "numpy/core/setup.py", line 286, in generate_config_h |
|---|
| 845 | moredefs, ignored = cocache.check_types(config_cmd, ext, build_dir) |
|---|
| 846 | File "numpy/core/setup.py", line 30, in check_types |
|---|
| 847 | out = check_types(*a, **kw) |
|---|
| 848 | File "numpy/core/setup.py", line 186, in check_types |
|---|
| 849 | "Cannot compiler 'Python.h'. Perhaps you need to "\ |
|---|
| 850 | SystemError: Cannot compiler 'Python.h'. Perhaps you need to install python-dev|python-devel. |
|---|
| 851 | Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-numpy/work/numpy-1.3.0" && /opt/local/Library/Frameworks/Python.framework/Versions/2.6/bin/python2.6 setup.py --no-user-cfg build " returned error 1 |
|---|
| 852 | Command output: return old_setup(**new_attr) |
|---|
| 853 | File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/distutils/core.py", line 152, in setup |
|---|
| 854 | dist.run_commands() |
|---|
| 855 | File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/distutils/dist.py", line 987, in run_commands |
|---|
| 856 | self.run_command(cmd) |
|---|
| 857 | File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/distutils/dist.py", line 1007, in run_command |
|---|
| 858 | cmd_obj.run() |
|---|
| 859 | File "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-numpy/work/numpy-1.3.0/numpy/distutils/command/build.py", line 37, in run |
|---|
| 860 | old_build.run(self) |
|---|
| 861 | File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/distutils/command/build.py", line 134, in run |
|---|
| 862 | self.run_command(cmd_name) |
|---|
| 863 | File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/distutils/cmd.py", line 333, in run_command |
|---|
| 864 | self.distribution.run_command(command) |
|---|
| 865 | File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/distutils/dist.py", line 1007, in run_command |
|---|
| 866 | cmd_obj.run() |
|---|
| 867 | File "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-numpy/work/numpy-1.3.0/numpy/distutils/command/build_src.py", line 130, in run |
|---|
| 868 | self.build_sources() |
|---|
| 869 | File "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-numpy/work/numpy-1.3.0/numpy/distutils/command/build_src.py", line 147, in build_sources |
|---|
| 870 | self.build_extension_sources(ext) |
|---|
| 871 | File "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-numpy/work/numpy-1.3.0/numpy/distutils/command/build_src.py", line 250, in build_extension_sources |
|---|
| 872 | sources = self.generate_sources(sources, ext) |
|---|
| 873 | File "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-numpy/work/numpy-1.3.0/numpy/distutils/command/build_src.py", line 307, in generate_sources |
|---|
| 874 | source = func(extension, build_dir) |
|---|
| 875 | File "numpy/core/setup.py", line 286, in generate_config_h |
|---|
| 876 | moredefs, ignored = cocache.check_types(config_cmd, ext, build_dir) |
|---|
| 877 | File "numpy/core/setup.py", line 30, in check_types |
|---|
| 878 | out = check_types(*a, **kw) |
|---|
| 879 | File "numpy/core/setup.py", line 186, in check_types |
|---|
| 880 | "Cannot compiler 'Python.h'. Perhaps you need to "\ |
|---|
| 881 | SystemError: Cannot compiler 'Python.h'. Perhaps you need to install python-dev|python-devel. |
|---|
| 882 | |
|---|
| 883 | DEBUG: Backtrace: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-numpy/work/numpy-1.3.0" && /opt/local/Library/Frameworks/Python.framework/Versions/2.6/bin/python2.6 setup.py --no-user-cfg build " returned error 1 |
|---|
| 884 | Command output: return old_setup(**new_attr) |
|---|
| 885 | File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/distutils/core.py", line 152, in setup |
|---|
| 886 | dist.run_commands() |
|---|
| 887 | File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/distutils/dist.py", line 987, in run_commands |
|---|
| 888 | self.run_command(cmd) |
|---|
| 889 | File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/distutils/dist.py", line 1007, in run_command |
|---|
| 890 | cmd_obj.run() |
|---|
| 891 | File "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-numpy/work/numpy-1.3.0/numpy/distutils/command/build.py", line 37, in run |
|---|
| 892 | old_build.run(self) |
|---|
| 893 | File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/distutils/command/build.py", line 134, in run |
|---|
| 894 | self.run_command(cmd_name) |
|---|
| 895 | File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/distutils/cmd.py", line 333, in run_command |
|---|
| 896 | self.distribution.run_command(command) |
|---|
| 897 | File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/distutils/dist.py", line 1007, in run_command |
|---|
| 898 | cmd_obj.run() |
|---|
| 899 | File "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-numpy/work/numpy-1.3.0/numpy/distutils/command/build_src.py", line 130, in run |
|---|
| 900 | self.build_sources() |
|---|
| 901 | File "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-numpy/work/numpy-1.3.0/numpy/distutils/command/build_src.py", line 147, in build_sources |
|---|
| 902 | self.build_extension_sources(ext) |
|---|
| 903 | File "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-numpy/work/numpy-1.3.0/numpy/distutils/command/build_src.py", line 250, in build_extension_sources |
|---|
| 904 | sources = self.generate_sources(sources, ext) |
|---|
| 905 | File "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-numpy/work/numpy-1.3.0/numpy/distutils/command/build_src.py", line 307, in generate_sources |
|---|
| 906 | source = func(extension, build_dir) |
|---|
| 907 | File "numpy/core/setup.py", line 286, in generate_config_h |
|---|
| 908 | moredefs, ignored = cocache.check_types(config_cmd, ext, build_dir) |
|---|
| 909 | File "numpy/core/setup.py", line 30, in check_types |
|---|
| 910 | out = check_types(*a, **kw) |
|---|
| 911 | File "numpy/core/setup.py", line 186, in check_types |
|---|
| 912 | "Cannot compiler 'Python.h'. Perhaps you need to "\ |
|---|
| 913 | SystemError: Cannot compiler 'Python.h'. Perhaps you need to install python-dev|python-devel. |
|---|
| 914 | |
|---|
| 915 | while executing |
|---|
| 916 | "command_exec build" |
|---|
| 917 | (procedure "portbuild::build_main" line 9) |
|---|
| 918 | invoked from within |
|---|
| 919 | "$procedure $targetname" |
|---|
| 920 | Warning: the following items did not execute (for py26-numpy): org.macports.activate org.macports.build org.macports.destroot org.macports.install |
|---|
| 921 | Error: Status 1 encountered during processing. |
|---|
