| 1 | Last login: Fri Nov 13 23:30:26 on ttys000 |
|---|
| 2 | You have mail. |
|---|
| 3 | iMac:~ mihailartuhov$ sudo port -d install Xft2 |
|---|
| 4 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2 |
|---|
| 5 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2 |
|---|
| 6 | DEBUG: OS Platform: darwin |
|---|
| 7 | DEBUG: OS Version: 10.2.0 |
|---|
| 8 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 9 | DEBUG: System Arch: i386 |
|---|
| 10 | DEBUG: setting option os.universal_supported to yes |
|---|
| 11 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 12 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 13 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 14 | DEBUG: adding the default universal variant |
|---|
| 15 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 16 | DEBUG: Requested variant darwin is not provided by port Xft2. |
|---|
| 17 | DEBUG: Requested variant i386 is not provided by port Xft2. |
|---|
| 18 | DEBUG: Requested variant macosx is not provided by port Xft2. |
|---|
| 19 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib |
|---|
| 20 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 21 | DEBUG: zlib 1.2.3_3 exists in the ports tree |
|---|
| 22 | DEBUG: zlib 1.2.3_3 is the latest installed |
|---|
| 23 | DEBUG: zlib 1.2.3_3 is active |
|---|
| 24 | DEBUG: Merging existing variants into variants |
|---|
| 25 | DEBUG: new fully merged portvariants: |
|---|
| 26 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib |
|---|
| 27 | DEBUG: OS Platform: darwin |
|---|
| 28 | DEBUG: OS Version: 10.2.0 |
|---|
| 29 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 30 | DEBUG: System Arch: i386 |
|---|
| 31 | DEBUG: setting option os.universal_supported to yes |
|---|
| 32 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 33 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 34 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 35 | DEBUG: adding the default universal variant |
|---|
| 36 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 37 | DEBUG: Requested variant darwin is not provided by port zlib. |
|---|
| 38 | DEBUG: Requested variant i386 is not provided by port zlib. |
|---|
| 39 | DEBUG: Requested variant macosx is not provided by port zlib. |
|---|
| 40 | DEBUG: No need to upgrade! zlib 1.2.3_3 >= zlib 1.2.3_3 |
|---|
| 41 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender |
|---|
| 42 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 43 | DEBUG: xrender 0.9.5_0 exists in the ports tree |
|---|
| 44 | DEBUG: xrender 0.9.5_0 is the latest installed |
|---|
| 45 | DEBUG: xrender 0.9.0_2 is active |
|---|
| 46 | DEBUG: Merging existing variants into variants |
|---|
| 47 | DEBUG: new fully merged portvariants: |
|---|
| 48 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender |
|---|
| 49 | DEBUG: OS Platform: darwin |
|---|
| 50 | DEBUG: OS Version: 10.2.0 |
|---|
| 51 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 52 | DEBUG: System Arch: i386 |
|---|
| 53 | DEBUG: setting option os.universal_supported to yes |
|---|
| 54 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 55 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 56 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 57 | DEBUG: adding the default universal variant |
|---|
| 58 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 59 | DEBUG: Requested variant darwin is not provided by port xrender. |
|---|
| 60 | DEBUG: Requested variant i386 is not provided by port xrender. |
|---|
| 61 | DEBUG: Requested variant macosx is not provided by port xrender. |
|---|
| 62 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig |
|---|
| 63 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 64 | DEBUG: pkgconfig 0.23_1 exists in the ports tree |
|---|
| 65 | DEBUG: pkgconfig 0.23_1 is the latest installed |
|---|
| 66 | DEBUG: pkgconfig 0.23_1 is active |
|---|
| 67 | DEBUG: Merging existing variants into variants |
|---|
| 68 | DEBUG: new fully merged portvariants: |
|---|
| 69 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig |
|---|
| 70 | DEBUG: OS Platform: darwin |
|---|
| 71 | DEBUG: OS Version: 10.2.0 |
|---|
| 72 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 73 | DEBUG: System Arch: i386 |
|---|
| 74 | DEBUG: setting option os.universal_supported to yes |
|---|
| 75 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 76 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 77 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 78 | DEBUG: adding the default universal variant |
|---|
| 79 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 80 | DEBUG: Requested variant darwin is not provided by port pkgconfig. |
|---|
| 81 | DEBUG: Requested variant i386 is not provided by port pkgconfig. |
|---|
| 82 | DEBUG: Requested variant macosx is not provided by port pkgconfig. |
|---|
| 83 | DEBUG: No need to upgrade! pkgconfig 0.23_1 >= pkgconfig 0.23_1 |
|---|
| 84 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto |
|---|
| 85 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 86 | DEBUG: xorg-xproto 7.0.16_0 exists in the ports tree |
|---|
| 87 | DEBUG: xorg-xproto 7.0.16_0 is the latest installed |
|---|
| 88 | DEBUG: xorg-xproto 7.0.16_0 is active |
|---|
| 89 | DEBUG: Merging existing variants into variants |
|---|
| 90 | DEBUG: new fully merged portvariants: |
|---|
| 91 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto |
|---|
| 92 | DEBUG: OS Platform: darwin |
|---|
| 93 | DEBUG: OS Version: 10.2.0 |
|---|
| 94 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 95 | DEBUG: System Arch: i386 |
|---|
| 96 | DEBUG: setting option os.universal_supported to yes |
|---|
| 97 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 98 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 99 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 100 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
|---|
| 101 | DEBUG: Requested variant darwin is not provided by port xorg-xproto. |
|---|
| 102 | DEBUG: Requested variant i386 is not provided by port xorg-xproto. |
|---|
| 103 | DEBUG: Requested variant macosx is not provided by port xorg-xproto. |
|---|
| 104 | DEBUG: No need to upgrade! xorg-xproto 7.0.16_0 >= xorg-xproto 7.0.16_0 |
|---|
| 105 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-renderproto |
|---|
| 106 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 107 | DEBUG: xorg-renderproto 0.11_0 exists in the ports tree |
|---|
| 108 | DEBUG: xorg-renderproto 0.11_0 is the latest installed |
|---|
| 109 | DEBUG: xorg-renderproto 0.11_0 is active |
|---|
| 110 | DEBUG: Merging existing variants into variants |
|---|
| 111 | DEBUG: new fully merged portvariants: |
|---|
| 112 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-renderproto |
|---|
| 113 | DEBUG: OS Platform: darwin |
|---|
| 114 | DEBUG: OS Version: 10.2.0 |
|---|
| 115 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 116 | DEBUG: System Arch: i386 |
|---|
| 117 | DEBUG: setting option os.universal_supported to yes |
|---|
| 118 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 119 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 120 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 121 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
|---|
| 122 | DEBUG: Requested variant darwin is not provided by port xorg-renderproto. |
|---|
| 123 | DEBUG: Requested variant i386 is not provided by port xorg-renderproto. |
|---|
| 124 | DEBUG: Requested variant macosx is not provided by port xorg-renderproto. |
|---|
| 125 | DEBUG: No need to upgrade! xorg-renderproto 0.11_0 >= xorg-renderproto 0.11_0 |
|---|
| 126 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11 |
|---|
| 127 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 128 | DEBUG: xorg-libX11 1.3.2_0 exists in the ports tree |
|---|
| 129 | DEBUG: xorg-libX11 1.3.2_0 is the latest installed |
|---|
| 130 | DEBUG: xorg-libX11 1.3.2_0 is active |
|---|
| 131 | DEBUG: Merging existing variants into variants |
|---|
| 132 | DEBUG: new fully merged portvariants: |
|---|
| 133 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11 |
|---|
| 134 | DEBUG: OS Platform: darwin |
|---|
| 135 | DEBUG: OS Version: 10.2.0 |
|---|
| 136 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 137 | DEBUG: System Arch: i386 |
|---|
| 138 | DEBUG: setting option os.universal_supported to yes |
|---|
| 139 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 140 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 141 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 142 | DEBUG: adding the default universal variant |
|---|
| 143 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 144 | DEBUG: Requested variant darwin is not provided by port xorg-libX11. |
|---|
| 145 | DEBUG: Requested variant i386 is not provided by port xorg-libX11. |
|---|
| 146 | DEBUG: Requested variant macosx is not provided by port xorg-libX11. |
|---|
| 147 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-util-macros |
|---|
| 148 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 149 | DEBUG: xorg-util-macros 1.3.0_0 exists in the ports tree |
|---|
| 150 | DEBUG: xorg-util-macros 1.3.0_0 is the latest installed |
|---|
| 151 | DEBUG: xorg-util-macros 1.3.0_0 is active |
|---|
| 152 | DEBUG: Merging existing variants into variants |
|---|
| 153 | DEBUG: new fully merged portvariants: |
|---|
| 154 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-util-macros |
|---|
| 155 | DEBUG: OS Platform: darwin |
|---|
| 156 | DEBUG: OS Version: 10.2.0 |
|---|
| 157 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 158 | DEBUG: System Arch: i386 |
|---|
| 159 | DEBUG: setting option os.universal_supported to yes |
|---|
| 160 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 161 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 162 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 163 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
|---|
| 164 | DEBUG: Requested variant darwin is not provided by port xorg-util-macros. |
|---|
| 165 | DEBUG: Requested variant i386 is not provided by port xorg-util-macros. |
|---|
| 166 | DEBUG: Requested variant macosx is not provided by port xorg-util-macros. |
|---|
| 167 | DEBUG: No need to upgrade! xorg-util-macros 1.3.0_0 >= xorg-util-macros 1.3.0_0 |
|---|
| 168 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xtrans |
|---|
| 169 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 170 | DEBUG: xorg-xtrans 1.2.5_0 exists in the ports tree |
|---|
| 171 | DEBUG: xorg-xtrans 1.2.5_0 is the latest installed |
|---|
| 172 | DEBUG: xorg-xtrans 1.2.5_0 is active |
|---|
| 173 | DEBUG: Merging existing variants into variants |
|---|
| 174 | DEBUG: new fully merged portvariants: |
|---|
| 175 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xtrans |
|---|
| 176 | DEBUG: OS Platform: darwin |
|---|
| 177 | DEBUG: OS Version: 10.2.0 |
|---|
| 178 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 179 | DEBUG: System Arch: i386 |
|---|
| 180 | DEBUG: setting option os.universal_supported to yes |
|---|
| 181 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 182 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 183 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 184 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
|---|
| 185 | DEBUG: Requested variant darwin is not provided by port xorg-xtrans. |
|---|
| 186 | DEBUG: Requested variant i386 is not provided by port xorg-xtrans. |
|---|
| 187 | DEBUG: Requested variant macosx is not provided by port xorg-xtrans. |
|---|
| 188 | DEBUG: No need to upgrade! xorg-xtrans 1.2.5_0 >= xorg-xtrans 1.2.5_0 |
|---|
| 189 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-bigreqsproto |
|---|
| 190 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 191 | DEBUG: xorg-bigreqsproto 1.1.0_0 exists in the ports tree |
|---|
| 192 | DEBUG: xorg-bigreqsproto 1.1.0_0 is the latest installed |
|---|
| 193 | DEBUG: xorg-bigreqsproto 1.1.0_0 is active |
|---|
| 194 | DEBUG: Merging existing variants into variants |
|---|
| 195 | DEBUG: new fully merged portvariants: |
|---|
| 196 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-bigreqsproto |
|---|
| 197 | DEBUG: OS Platform: darwin |
|---|
| 198 | DEBUG: OS Version: 10.2.0 |
|---|
| 199 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 200 | DEBUG: System Arch: i386 |
|---|
| 201 | DEBUG: setting option os.universal_supported to yes |
|---|
| 202 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 203 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 204 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 205 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
|---|
| 206 | DEBUG: Requested variant darwin is not provided by port xorg-bigreqsproto. |
|---|
| 207 | DEBUG: Requested variant i386 is not provided by port xorg-bigreqsproto. |
|---|
| 208 | DEBUG: Requested variant macosx is not provided by port xorg-bigreqsproto. |
|---|
| 209 | DEBUG: No need to upgrade! xorg-bigreqsproto 1.1.0_0 >= xorg-bigreqsproto 1.1.0_0 |
|---|
| 210 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcmiscproto |
|---|
| 211 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 212 | DEBUG: xorg-xcmiscproto 1.2.0_0 exists in the ports tree |
|---|
| 213 | DEBUG: xorg-xcmiscproto 1.2.0_0 is the latest installed |
|---|
| 214 | DEBUG: xorg-xcmiscproto 1.2.0_0 is active |
|---|
| 215 | DEBUG: Merging existing variants into variants |
|---|
| 216 | DEBUG: new fully merged portvariants: |
|---|
| 217 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcmiscproto |
|---|
| 218 | DEBUG: OS Platform: darwin |
|---|
| 219 | DEBUG: OS Version: 10.2.0 |
|---|
| 220 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 221 | DEBUG: System Arch: i386 |
|---|
| 222 | DEBUG: setting option os.universal_supported to yes |
|---|
| 223 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 224 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 225 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 226 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
|---|
| 227 | DEBUG: Requested variant darwin is not provided by port xorg-xcmiscproto. |
|---|
| 228 | DEBUG: Requested variant i386 is not provided by port xorg-xcmiscproto. |
|---|
| 229 | DEBUG: Requested variant macosx is not provided by port xorg-xcmiscproto. |
|---|
| 230 | DEBUG: No need to upgrade! xorg-xcmiscproto 1.2.0_0 >= xorg-xcmiscproto 1.2.0_0 |
|---|
| 231 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto |
|---|
| 232 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 233 | DEBUG: xorg-xextproto 7.1.1_0 exists in the ports tree |
|---|
| 234 | DEBUG: xorg-xextproto 7.1.1_0 is the latest installed |
|---|
| 235 | DEBUG: xorg-xextproto 7.1.1_0 is active |
|---|
| 236 | DEBUG: Merging existing variants into variants |
|---|
| 237 | DEBUG: new fully merged portvariants: |
|---|
| 238 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto |
|---|
| 239 | DEBUG: OS Platform: darwin |
|---|
| 240 | DEBUG: OS Version: 10.2.0 |
|---|
| 241 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 242 | DEBUG: System Arch: i386 |
|---|
| 243 | DEBUG: setting option os.universal_supported to yes |
|---|
| 244 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 245 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 246 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 247 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
|---|
| 248 | DEBUG: Requested variant darwin is not provided by port xorg-xextproto. |
|---|
| 249 | DEBUG: Requested variant i386 is not provided by port xorg-xextproto. |
|---|
| 250 | DEBUG: Requested variant macosx is not provided by port xorg-xextproto. |
|---|
| 251 | DEBUG: No need to upgrade! xorg-xextproto 7.1.1_0 >= xorg-xextproto 7.1.1_0 |
|---|
| 252 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xf86bigfontproto |
|---|
| 253 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 254 | DEBUG: xorg-xf86bigfontproto 1.2.0_0 exists in the ports tree |
|---|
| 255 | DEBUG: xorg-xf86bigfontproto 1.2.0_0 is the latest installed |
|---|
| 256 | DEBUG: xorg-xf86bigfontproto 1.2.0_0 is active |
|---|
| 257 | DEBUG: Merging existing variants into variants |
|---|
| 258 | DEBUG: new fully merged portvariants: |
|---|
| 259 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xf86bigfontproto |
|---|
| 260 | DEBUG: OS Platform: darwin |
|---|
| 261 | DEBUG: OS Version: 10.2.0 |
|---|
| 262 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 263 | DEBUG: System Arch: i386 |
|---|
| 264 | DEBUG: setting option os.universal_supported to yes |
|---|
| 265 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 266 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 267 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 268 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
|---|
| 269 | DEBUG: Requested variant darwin is not provided by port xorg-xf86bigfontproto. |
|---|
| 270 | DEBUG: Requested variant i386 is not provided by port xorg-xf86bigfontproto. |
|---|
| 271 | DEBUG: Requested variant macosx is not provided by port xorg-xf86bigfontproto. |
|---|
| 272 | DEBUG: No need to upgrade! xorg-xf86bigfontproto 1.2.0_0 >= xorg-xf86bigfontproto 1.2.0_0 |
|---|
| 273 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-inputproto |
|---|
| 274 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 275 | DEBUG: xorg-inputproto 2.0_0 exists in the ports tree |
|---|
| 276 | DEBUG: xorg-inputproto 2.0_0 is the latest installed |
|---|
| 277 | DEBUG: xorg-inputproto 2.0_0 is active |
|---|
| 278 | DEBUG: Merging existing variants into variants |
|---|
| 279 | DEBUG: new fully merged portvariants: |
|---|
| 280 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-inputproto |
|---|
| 281 | DEBUG: OS Platform: darwin |
|---|
| 282 | DEBUG: OS Version: 10.2.0 |
|---|
| 283 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 284 | DEBUG: System Arch: i386 |
|---|
| 285 | DEBUG: setting option os.universal_supported to yes |
|---|
| 286 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 287 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 288 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 289 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
|---|
| 290 | DEBUG: Requested variant darwin is not provided by port xorg-inputproto. |
|---|
| 291 | DEBUG: Requested variant i386 is not provided by port xorg-inputproto. |
|---|
| 292 | DEBUG: Requested variant macosx is not provided by port xorg-inputproto. |
|---|
| 293 | DEBUG: No need to upgrade! xorg-inputproto 2.0_0 >= xorg-inputproto 2.0_0 |
|---|
| 294 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto |
|---|
| 295 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 296 | DEBUG: xorg-kbproto 1.0.4_0 exists in the ports tree |
|---|
| 297 | DEBUG: xorg-kbproto 1.0.4_0 is the latest installed |
|---|
| 298 | DEBUG: xorg-kbproto 1.0.4_0 is active |
|---|
| 299 | DEBUG: Merging existing variants into variants |
|---|
| 300 | DEBUG: new fully merged portvariants: |
|---|
| 301 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto |
|---|
| 302 | DEBUG: OS Platform: darwin |
|---|
| 303 | DEBUG: OS Version: 10.2.0 |
|---|
| 304 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 305 | DEBUG: System Arch: i386 |
|---|
| 306 | DEBUG: setting option os.universal_supported to yes |
|---|
| 307 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 308 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 309 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 310 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
|---|
| 311 | DEBUG: Requested variant darwin is not provided by port xorg-kbproto. |
|---|
| 312 | DEBUG: Requested variant i386 is not provided by port xorg-kbproto. |
|---|
| 313 | DEBUG: Requested variant macosx is not provided by port xorg-kbproto. |
|---|
| 314 | DEBUG: No need to upgrade! xorg-kbproto 1.0.4_0 >= xorg-kbproto 1.0.4_0 |
|---|
| 315 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/groff |
|---|
| 316 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 317 | DEBUG: groff 1.20.1_1 exists in the ports tree |
|---|
| 318 | DEBUG: groff 1.20.1_1 is the latest installed |
|---|
| 319 | DEBUG: groff 1.20.1_1 is active |
|---|
| 320 | DEBUG: Merging existing variants into variants |
|---|
| 321 | DEBUG: new fully merged portvariants: |
|---|
| 322 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/groff |
|---|
| 323 | DEBUG: OS Platform: darwin |
|---|
| 324 | DEBUG: OS Version: 10.2.0 |
|---|
| 325 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 326 | DEBUG: System Arch: i386 |
|---|
| 327 | DEBUG: setting option os.universal_supported to yes |
|---|
| 328 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 329 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 330 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 331 | DEBUG: adding the default universal variant |
|---|
| 332 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 333 | DEBUG: Requested variant darwin is not provided by port groff. |
|---|
| 334 | DEBUG: Requested variant i386 is not provided by port groff. |
|---|
| 335 | DEBUG: Requested variant macosx is not provided by port groff. |
|---|
| 336 | DEBUG: No need to upgrade! groff 1.20.1_1 >= groff 1.20.1_1 |
|---|
| 337 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp |
|---|
| 338 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 339 | DEBUG: xorg-libXdmcp 1.0.3_0 exists in the ports tree |
|---|
| 340 | DEBUG: xorg-libXdmcp 1.0.3_0 is the latest installed |
|---|
| 341 | DEBUG: xorg-libXdmcp 1.0.3_0 is active |
|---|
| 342 | DEBUG: Merging existing variants into variants |
|---|
| 343 | DEBUG: new fully merged portvariants: |
|---|
| 344 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp |
|---|
| 345 | DEBUG: OS Platform: darwin |
|---|
| 346 | DEBUG: OS Version: 10.2.0 |
|---|
| 347 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 348 | DEBUG: System Arch: i386 |
|---|
| 349 | DEBUG: setting option os.universal_supported to yes |
|---|
| 350 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 351 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 352 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 353 | DEBUG: adding the default universal variant |
|---|
| 354 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 355 | DEBUG: Requested variant darwin is not provided by port xorg-libXdmcp. |
|---|
| 356 | DEBUG: Requested variant i386 is not provided by port xorg-libXdmcp. |
|---|
| 357 | DEBUG: Requested variant macosx is not provided by port xorg-libXdmcp. |
|---|
| 358 | DEBUG: No need to upgrade! xorg-libXdmcp 1.0.3_0 >= xorg-libXdmcp 1.0.3_0 |
|---|
| 359 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau |
|---|
| 360 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 361 | DEBUG: xorg-libXau 1.0.5_0 exists in the ports tree |
|---|
| 362 | DEBUG: xorg-libXau 1.0.5_0 is the latest installed |
|---|
| 363 | DEBUG: xorg-libXau 1.0.5_0 is active |
|---|
| 364 | DEBUG: Merging existing variants into variants |
|---|
| 365 | DEBUG: new fully merged portvariants: |
|---|
| 366 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau |
|---|
| 367 | DEBUG: OS Platform: darwin |
|---|
| 368 | DEBUG: OS Version: 10.2.0 |
|---|
| 369 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 370 | DEBUG: System Arch: i386 |
|---|
| 371 | DEBUG: setting option os.universal_supported to yes |
|---|
| 372 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 373 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 374 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 375 | DEBUG: adding the default universal variant |
|---|
| 376 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 377 | DEBUG: Requested variant darwin is not provided by port xorg-libXau. |
|---|
| 378 | DEBUG: Requested variant i386 is not provided by port xorg-libXau. |
|---|
| 379 | DEBUG: Requested variant macosx is not provided by port xorg-libXau. |
|---|
| 380 | DEBUG: No need to upgrade! xorg-libXau 1.0.5_0 >= xorg-libXau 1.0.5_0 |
|---|
| 381 | DEBUG: No need to upgrade! xorg-libX11 1.3.2_0 >= xorg-libX11 1.3.2_0 |
|---|
| 382 | DEBUG: No need to upgrade! xrender 0.9.5_0 >= xrender 0.9.5_0 |
|---|
| 383 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype |
|---|
| 384 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 385 | DEBUG: freetype 2.3.9_1 exists in the ports tree |
|---|
| 386 | DEBUG: freetype 2.3.9_1 +macosx is the latest installed |
|---|
| 387 | DEBUG: freetype 2.3.9_1 +macosx is active |
|---|
| 388 | DEBUG: Merging existing variants macosx into variants |
|---|
| 389 | DEBUG: new fully merged portvariants: |
|---|
| 390 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype |
|---|
| 391 | DEBUG: OS Platform: darwin |
|---|
| 392 | DEBUG: OS Version: 10.2.0 |
|---|
| 393 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 394 | DEBUG: System Arch: i386 |
|---|
| 395 | DEBUG: setting option os.universal_supported to yes |
|---|
| 396 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 397 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 398 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 399 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 400 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 401 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 402 | DEBUG: universal variant already exists, so not adding the default one |
|---|
| 403 | DEBUG: Requested variant darwin is not provided by port freetype. |
|---|
| 404 | DEBUG: Requested variant i386 is not provided by port freetype. |
|---|
| 405 | DEBUG: Executing variant macosx provides macosx |
|---|
| 406 | DEBUG: No need to upgrade! freetype 2.3.9_1 >= freetype 2.3.9_1 |
|---|
| 407 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig |
|---|
| 408 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 409 | DEBUG: fontconfig 2.7.3_0 exists in the ports tree |
|---|
| 410 | DEBUG: fontconfig 2.7.3_0 +macosx is the latest installed |
|---|
| 411 | DEBUG: fontconfig 2.7.3_0 +macosx is active |
|---|
| 412 | DEBUG: Merging existing variants macosx into variants |
|---|
| 413 | DEBUG: new fully merged portvariants: |
|---|
| 414 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig |
|---|
| 415 | DEBUG: OS Platform: darwin |
|---|
| 416 | DEBUG: OS Version: 10.2.0 |
|---|
| 417 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 418 | DEBUG: System Arch: i386 |
|---|
| 419 | DEBUG: setting option os.universal_supported to yes |
|---|
| 420 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 421 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 422 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 423 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 424 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 425 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 426 | DEBUG: universal variant already exists, so not adding the default one |
|---|
| 427 | DEBUG: Requested variant darwin is not provided by port fontconfig. |
|---|
| 428 | DEBUG: Requested variant i386 is not provided by port fontconfig. |
|---|
| 429 | DEBUG: Executing variant macosx provides macosx |
|---|
| 430 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv |
|---|
| 431 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 432 | DEBUG: libiconv 1.13_0 exists in the ports tree |
|---|
| 433 | DEBUG: libiconv 1.13_0 is the latest installed |
|---|
| 434 | DEBUG: libiconv 1.13_0 is active |
|---|
| 435 | DEBUG: Merging existing variants into variants |
|---|
| 436 | DEBUG: new fully merged portvariants: |
|---|
| 437 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv |
|---|
| 438 | DEBUG: OS Platform: darwin |
|---|
| 439 | DEBUG: OS Version: 10.2.0 |
|---|
| 440 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 441 | DEBUG: System Arch: i386 |
|---|
| 442 | DEBUG: setting option os.universal_supported to yes |
|---|
| 443 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 444 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 445 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 446 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 447 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 448 | DEBUG: universal variant already exists, so not adding the default one |
|---|
| 449 | DEBUG: Requested variant darwin is not provided by port libiconv. |
|---|
| 450 | DEBUG: Requested variant i386 is not provided by port libiconv. |
|---|
| 451 | DEBUG: Requested variant macosx is not provided by port libiconv. |
|---|
| 452 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf |
|---|
| 453 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 454 | DEBUG: gperf 3.0.4_0 exists in the ports tree |
|---|
| 455 | DEBUG: gperf 3.0.4_0 is the latest installed |
|---|
| 456 | DEBUG: gperf 3.0.4_0 is active |
|---|
| 457 | DEBUG: Merging existing variants into variants |
|---|
| 458 | DEBUG: new fully merged portvariants: |
|---|
| 459 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf |
|---|
| 460 | DEBUG: OS Platform: darwin |
|---|
| 461 | DEBUG: OS Version: 10.2.0 |
|---|
| 462 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 463 | DEBUG: System Arch: i386 |
|---|
| 464 | DEBUG: setting option os.universal_supported to yes |
|---|
| 465 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 466 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 467 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 468 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 469 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 470 | DEBUG: universal variant already exists, so not adding the default one |
|---|
| 471 | DEBUG: Requested variant darwin is not provided by port gperf. |
|---|
| 472 | DEBUG: Requested variant i386 is not provided by port gperf. |
|---|
| 473 | DEBUG: Requested variant macosx is not provided by port gperf. |
|---|
| 474 | DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0 |
|---|
| 475 | DEBUG: No need to upgrade! libiconv 1.13_0 >= libiconv 1.13_0 |
|---|
| 476 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat |
|---|
| 477 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 478 | DEBUG: expat 2.0.1_0 exists in the ports tree |
|---|
| 479 | DEBUG: expat 2.0.1_0 is the latest installed |
|---|
| 480 | DEBUG: expat 2.0.1_0 is active |
|---|
| 481 | DEBUG: Merging existing variants into variants |
|---|
| 482 | DEBUG: new fully merged portvariants: |
|---|
| 483 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat |
|---|
| 484 | DEBUG: OS Platform: darwin |
|---|
| 485 | DEBUG: OS Version: 10.2.0 |
|---|
| 486 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 487 | DEBUG: System Arch: i386 |
|---|
| 488 | DEBUG: setting option os.universal_supported to yes |
|---|
| 489 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 490 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 491 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 492 | DEBUG: adding the default universal variant |
|---|
| 493 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 494 | DEBUG: Requested variant darwin is not provided by port expat. |
|---|
| 495 | DEBUG: Requested variant i386 is not provided by port expat. |
|---|
| 496 | DEBUG: Requested variant macosx is not provided by port expat. |
|---|
| 497 | DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0 |
|---|
| 498 | DEBUG: No need to upgrade! fontconfig 2.7.3_0 >= fontconfig 2.7.3_0 |
|---|
| 499 | ---> Computing dependencies for Xft2 |
|---|
| 500 | DEBUG: Searching for dependency: zlib |
|---|
| 501 | DEBUG: Found Dependency: receipt exists for zlib |
|---|
| 502 | DEBUG: Searching for dependency: xrender |
|---|
| 503 | DEBUG: Found Dependency: receipt exists for xrender |
|---|
| 504 | DEBUG: Searching for dependency: freetype |
|---|
| 505 | DEBUG: Found Dependency: receipt exists for freetype |
|---|
| 506 | DEBUG: Searching for dependency: fontconfig |
|---|
| 507 | DEBUG: Found Dependency: receipt exists for fontconfig |
|---|
| 508 | DEBUG: Searching for dependency: expat |
|---|
| 509 | DEBUG: Found Dependency: receipt exists for expat |
|---|
| 510 | DEBUG: Searching for dependency: pkgconfig |
|---|
| 511 | DEBUG: Found Dependency: receipt exists for pkgconfig |
|---|
| 512 | DEBUG: Executing org.macports.main (Xft2) |
|---|
| 513 | DEBUG: Skipping completed org.macports.fetch (Xft2) |
|---|
| 514 | DEBUG: Skipping completed org.macports.checksum (Xft2) |
|---|
| 515 | DEBUG: setting option extract.cmd to /usr/bin/bzip2 |
|---|
| 516 | DEBUG: Skipping completed org.macports.extract (Xft2) |
|---|
| 517 | DEBUG: Skipping completed org.macports.patch (Xft2) |
|---|
| 518 | DEBUG: Skipping completed org.macports.configure (Xft2) |
|---|
| 519 | ---> Building Xft2 |
|---|
| 520 | DEBUG: Executing org.macports.build (Xft2) |
|---|
| 521 | DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.6' |
|---|
| 522 | DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_Xft2/work/libXft-2.1.14" && /usr/bin/make -j2 all' |
|---|
| 523 | /usr/bin/make all-recursive |
|---|
| 524 | Making all in man |
|---|
| 525 | make[2]: Nothing to be done for `all'. |
|---|
| 526 | Making all in src |
|---|
| 527 | CCLD libXft.la |
|---|
| 528 | grep: /usr/X11/lib/libX11.la: No such file or directory |
|---|
| 529 | /opt/local/bin/gsed: can't read /usr/X11/lib/libX11.la: No such file or directory |
|---|
| 530 | libtool: link: `/usr/X11/lib/libX11.la' is not a valid libtool archive |
|---|
| 531 | make[2]: *** [libXft.la] Error 1 |
|---|
| 532 | make[1]: *** [all-recursive] Error 1 |
|---|
| 533 | make: *** [all] Error 2 |
|---|
| 534 | Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_Xft2/work/libXft-2.1.14" && /usr/bin/make -j2 all " returned error 2 |
|---|
| 535 | Command output: /usr/bin/make all-recursive |
|---|
| 536 | Making all in man |
|---|
| 537 | make[2]: Nothing to be done for `all'. |
|---|
| 538 | Making all in src |
|---|
| 539 | CCLD libXft.la |
|---|
| 540 | grep: /usr/X11/lib/libX11.la: No such file or directory |
|---|
| 541 | /opt/local/bin/gsed: can't read /usr/X11/lib/libX11.la: No such file or directory |
|---|
| 542 | libtool: link: `/usr/X11/lib/libX11.la' is not a valid libtool archive |
|---|
| 543 | make[2]: *** [libXft.la] Error 1 |
|---|
| 544 | make[1]: *** [all-recursive] Error 1 |
|---|
| 545 | make: *** [all] Error 2 |
|---|
| 546 | |
|---|
| 547 | DEBUG: Backtrace: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_Xft2/work/libXft-2.1.14" && /usr/bin/make -j2 all " returned error 2 |
|---|
| 548 | Command output: /usr/bin/make all-recursive |
|---|
| 549 | Making all in man |
|---|
| 550 | make[2]: Nothing to be done for `all'. |
|---|
| 551 | Making all in src |
|---|
| 552 | CCLD libXft.la |
|---|
| 553 | grep: /usr/X11/lib/libX11.la: No such file or directory |
|---|
| 554 | /opt/local/bin/gsed: can't read /usr/X11/lib/libX11.la: No such file or directory |
|---|
| 555 | libtool: link: `/usr/X11/lib/libX11.la' is not a valid libtool archive |
|---|
| 556 | make[2]: *** [libXft.la] Error 1 |
|---|
| 557 | make[1]: *** [all-recursive] Error 1 |
|---|
| 558 | make: *** [all] Error 2 |
|---|
| 559 | |
|---|
| 560 | while executing |
|---|
| 561 | "command_exec build" |
|---|
| 562 | (procedure "portbuild::build_main" line 9) |
|---|
| 563 | invoked from within |
|---|
| 564 | "$procedure $targetname" |
|---|
| 565 | Warning: the following items did not execute (for Xft2): org.macports.activate org.macports.build org.macports.destroot org.macports.install |
|---|
| 566 | Error: Status 1 encountered during processing. |
|---|
| 567 | iMac:~ mihailartuhov$ |
|---|
