Ticket #23048: wxWidgetsInstallDebug.txt

File wxWidgetsInstallDebug.txt, 82.1 KB (added by rmpowell77@…, 14 years ago)

debug log

Line 
1richard-powells-macbook-air:boost_1_41_0 rmpowell77$ sudo port  -d install wxWidgets
2Password:
3DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/wxWidgets
4DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/wxWidgets
5DEBUG: OS Platform: darwin
6DEBUG: OS Version: 10.2.0
7DEBUG: Mac OS X Version: 10.6
8DEBUG: System Arch: i386
9DEBUG: setting option os.universal_supported to yes
10DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
11DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
12DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
13DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
14DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
15DEBUG: 'universal_variant no' specified, so not adding the default universal variant
16DEBUG: Requested variant darwin is not provided by port wxWidgets.
17DEBUG: Requested variant i386 is not provided by port wxWidgets.
18DEBUG: Requested variant macosx is not provided by port wxWidgets.
19DEBUG: Executing variant darwin_10 provides darwin_10
20DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg
21DEBUG: epoch: in tree: 0 installed: 0
22DEBUG: jpeg 7_0 exists in the ports tree
23DEBUG: jpeg 7_0  is the latest installed
24DEBUG: jpeg 7_0  is active
25DEBUG: Merging existing variants  into variants
26DEBUG: new fully merged portvariants:
27DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg
28DEBUG: OS Platform: darwin
29DEBUG: OS Version: 10.2.0
30DEBUG: Mac OS X Version: 10.6
31DEBUG: System Arch: i386
32DEBUG: setting option os.universal_supported to yes
33DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
34DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
35DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
36DEBUG: adding the default universal variant
37DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
38DEBUG: Requested variant darwin is not provided by port jpeg.
39DEBUG: Requested variant i386 is not provided by port jpeg.
40DEBUG: Requested variant macosx is not provided by port jpeg.
41DEBUG: No need to upgrade! jpeg 7_0 >= jpeg 7_0
42DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff
43DEBUG: epoch: in tree: 0 installed: 0
44DEBUG: tiff 3.9.2_2 exists in the ports tree
45DEBUG: tiff 3.9.2_2 +macosx is the latest installed
46DEBUG: tiff 3.9.2_2 +macosx is active
47DEBUG: Merging existing variants macosx into variants
48DEBUG: new fully merged portvariants:
49DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff
50DEBUG: OS Platform: darwin
51DEBUG: OS Version: 10.2.0
52DEBUG: Mac OS X Version: 10.6
53DEBUG: System Arch: i386
54DEBUG: setting option os.universal_supported to yes
55DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
56DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
57DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
58DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
59DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
60DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
61DEBUG: universal variant already exists, so not adding the default one
62DEBUG: Requested variant darwin is not provided by port tiff.
63DEBUG: Requested variant i386 is not provided by port tiff.
64DEBUG: Executing variant macosx provides macosx
65DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
66DEBUG: epoch: in tree: 0 installed: 0
67DEBUG: zlib 1.2.3_3 exists in the ports tree
68DEBUG: zlib 1.2.3_3  is the latest installed
69DEBUG: zlib 1.2.3_3  is active
70DEBUG: Merging existing variants  into variants
71DEBUG: new fully merged portvariants:
72DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
73DEBUG: OS Platform: darwin
74DEBUG: OS Version: 10.2.0
75DEBUG: Mac OS X Version: 10.6
76DEBUG: System Arch: i386
77DEBUG: setting option os.universal_supported to yes
78DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
79DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
80DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
81DEBUG: adding the default universal variant
82DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
83DEBUG: Requested variant darwin is not provided by port zlib.
84DEBUG: Requested variant i386 is not provided by port zlib.
85DEBUG: Requested variant macosx is not provided by port zlib.
86DEBUG: No need to upgrade! zlib 1.2.3_3 >= zlib 1.2.3_3
87DEBUG: No need to upgrade! tiff 3.9.2_2 >= tiff 3.9.2_2
88DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng
89DEBUG: epoch: in tree: 0 installed: 0
90DEBUG: libpng 1.2.41_0 exists in the ports tree
91DEBUG: libpng 1.2.41_0  is the latest installed
92DEBUG: libpng 1.2.41_0  is active
93DEBUG: Merging existing variants  into variants
94DEBUG: new fully merged portvariants:
95DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng
96DEBUG: OS Platform: darwin
97DEBUG: OS Version: 10.2.0
98DEBUG: Mac OS X Version: 10.6
99DEBUG: System Arch: i386
100DEBUG: setting option os.universal_supported to yes
101DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
102DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
103DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
104DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
105DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
106DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
107DEBUG: universal variant already exists, so not adding the default one
108DEBUG: Requested variant darwin is not provided by port libpng.
109DEBUG: Requested variant i386 is not provided by port libpng.
110DEBUG: Requested variant macosx is not provided by port libpng.
111DEBUG: No need to upgrade! libpng 1.2.41_0 >= libpng 1.2.41_0
112DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
113DEBUG: epoch: in tree: 0 installed: 0
114DEBUG: libiconv 1.13_0 exists in the ports tree
115DEBUG: libiconv 1.13_0  is the latest installed
116DEBUG: libiconv 1.13_0  is active
117DEBUG: Merging existing variants  into variants
118DEBUG: new fully merged portvariants:
119DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
120DEBUG: OS Platform: darwin
121DEBUG: OS Version: 10.2.0
122DEBUG: Mac OS X Version: 10.6
123DEBUG: System Arch: i386
124DEBUG: setting option os.universal_supported to yes
125DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
126DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
127DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
128DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
129DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
130DEBUG: universal variant already exists, so not adding the default one
131DEBUG: Requested variant darwin is not provided by port libiconv.
132DEBUG: Requested variant i386 is not provided by port libiconv.
133DEBUG: Requested variant macosx is not provided by port libiconv.
134DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
135DEBUG: epoch: in tree: 0 installed: 0
136DEBUG: gperf 3.0.4_0 exists in the ports tree
137DEBUG: gperf 3.0.4_0  is the latest installed
138DEBUG: gperf 3.0.4_0  is active
139DEBUG: Merging existing variants  into variants
140DEBUG: new fully merged portvariants:
141DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
142DEBUG: OS Platform: darwin
143DEBUG: OS Version: 10.2.0
144DEBUG: Mac OS X Version: 10.6
145DEBUG: System Arch: i386
146DEBUG: setting option os.universal_supported to yes
147DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
148DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
149DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
150DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
151DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
152DEBUG: universal variant already exists, so not adding the default one
153DEBUG: Requested variant darwin is not provided by port gperf.
154DEBUG: Requested variant i386 is not provided by port gperf.
155DEBUG: Requested variant macosx is not provided by port gperf.
156DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0
157DEBUG: No need to upgrade! libiconv 1.13_0 >= libiconv 1.13_0
158DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
159DEBUG: epoch: in tree: 0 installed: 0
160DEBUG: expat 2.0.1_0 exists in the ports tree
161DEBUG: expat 2.0.1_0  is the latest installed
162DEBUG: expat 2.0.1_0  is active
163DEBUG: Merging existing variants  into variants
164DEBUG: new fully merged portvariants:
165DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
166DEBUG: OS Platform: darwin
167DEBUG: OS Version: 10.2.0
168DEBUG: Mac OS X Version: 10.6
169DEBUG: System Arch: i386
170DEBUG: setting option os.universal_supported to yes
171DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
172DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
173DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
174DEBUG: adding the default universal variant
175DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
176DEBUG: Requested variant darwin is not provided by port expat.
177DEBUG: Requested variant i386 is not provided by port expat.
178DEBUG: Requested variant macosx is not provided by port expat.
179DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
180DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libsdl
181DEBUG: epoch: in tree: 0 installed: 0
182DEBUG: libsdl 1.2.14_8 exists in the ports tree
183DEBUG: libsdl 1.2.14_8  is the latest installed
184DEBUG: libsdl 1.2.14_8  is active
185DEBUG: Merging existing variants  into variants
186DEBUG: new fully merged portvariants:
187DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libsdl
188DEBUG: OS Platform: darwin
189DEBUG: OS Version: 10.2.0
190DEBUG: Mac OS X Version: 10.6
191DEBUG: System Arch: i386
192DEBUG: setting option os.universal_supported to yes
193DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
194DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
195DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
196DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
197DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
198DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
199DEBUG: universal variant already exists, so not adding the default one
200DEBUG: Requested variant darwin is not provided by port libsdl.
201DEBUG: Requested variant i386 is not provided by port libsdl.
202DEBUG: Requested variant macosx is not provided by port libsdl.
203DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXext
204DEBUG: epoch: in tree: 0 installed: 0
205DEBUG: xorg-libXext 1.1.1_0 exists in the ports tree
206DEBUG: xorg-libXext 1.1.1_0  is the latest installed
207DEBUG: xorg-libXext 1.1.1_0  is active
208DEBUG: Merging existing variants  into variants
209DEBUG: new fully merged portvariants:
210DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXext
211DEBUG: OS Platform: darwin
212DEBUG: OS Version: 10.2.0
213DEBUG: Mac OS X Version: 10.6
214DEBUG: System Arch: i386
215DEBUG: setting option os.universal_supported to yes
216DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
217DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
218DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
219DEBUG: adding the default universal variant
220DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
221DEBUG: Requested variant darwin is not provided by port xorg-libXext.
222DEBUG: Requested variant i386 is not provided by port xorg-libXext.
223DEBUG: Requested variant macosx is not provided by port xorg-libXext.
224DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
225DEBUG: epoch: in tree: 0 installed: 0
226DEBUG: pkgconfig 0.23_1 exists in the ports tree
227DEBUG: pkgconfig 0.23_1  is the latest installed
228DEBUG: pkgconfig 0.23_1  is active
229DEBUG: Merging existing variants  into variants
230DEBUG: new fully merged portvariants:
231DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
232DEBUG: OS Platform: darwin
233DEBUG: OS Version: 10.2.0
234DEBUG: Mac OS X Version: 10.6
235DEBUG: System Arch: i386
236DEBUG: setting option os.universal_supported to yes
237DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
238DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
239DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
240DEBUG: adding the default universal variant
241DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
242DEBUG: Requested variant darwin is not provided by port pkgconfig.
243DEBUG: Requested variant i386 is not provided by port pkgconfig.
244DEBUG: Requested variant macosx is not provided by port pkgconfig.
245DEBUG: No need to upgrade! pkgconfig 0.23_1 >= pkgconfig 0.23_1
246DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto
247DEBUG: epoch: in tree: 0 installed: 0
248DEBUG: xorg-xproto 7.0.16_0 exists in the ports tree
249DEBUG: xorg-xproto 7.0.16_0  is the latest installed
250DEBUG: xorg-xproto 7.0.16_0  is active
251DEBUG: Merging existing variants  into variants
252DEBUG: new fully merged portvariants:
253DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto
254DEBUG: OS Platform: darwin
255DEBUG: OS Version: 10.2.0
256DEBUG: Mac OS X Version: 10.6
257DEBUG: System Arch: i386
258DEBUG: setting option os.universal_supported to yes
259DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
260DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
261DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
262DEBUG: 'universal_variant no' specified, so not adding the default universal variant
263DEBUG: Requested variant darwin is not provided by port xorg-xproto.
264DEBUG: Requested variant i386 is not provided by port xorg-xproto.
265DEBUG: Requested variant macosx is not provided by port xorg-xproto.
266DEBUG: No need to upgrade! xorg-xproto 7.0.16_0 >= xorg-xproto 7.0.16_0
267DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto
268DEBUG: epoch: in tree: 0 installed: 0
269DEBUG: xorg-xextproto 7.1.1_0 exists in the ports tree
270DEBUG: xorg-xextproto 7.1.1_0  is the latest installed
271DEBUG: xorg-xextproto 7.1.1_0  is active
272DEBUG: Merging existing variants  into variants
273DEBUG: new fully merged portvariants:
274DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto
275DEBUG: OS Platform: darwin
276DEBUG: OS Version: 10.2.0
277DEBUG: Mac OS X Version: 10.6
278DEBUG: System Arch: i386
279DEBUG: setting option os.universal_supported to yes
280DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
281DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
282DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
283DEBUG: 'universal_variant no' specified, so not adding the default universal variant
284DEBUG: Requested variant darwin is not provided by port xorg-xextproto.
285DEBUG: Requested variant i386 is not provided by port xorg-xextproto.
286DEBUG: Requested variant macosx is not provided by port xorg-xextproto.
287DEBUG: No need to upgrade! xorg-xextproto 7.1.1_0 >= xorg-xextproto 7.1.1_0
288DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11
289DEBUG: epoch: in tree: 0 installed: 0
290DEBUG: xorg-libX11 1.3.2_0 exists in the ports tree
291DEBUG: xorg-libX11 1.3.2_0  is the latest installed
292DEBUG: xorg-libX11 1.3.2_0  is active
293DEBUG: Merging existing variants  into variants
294DEBUG: new fully merged portvariants:
295DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11
296DEBUG: OS Platform: darwin
297DEBUG: OS Version: 10.2.0
298DEBUG: Mac OS X Version: 10.6
299DEBUG: System Arch: i386
300DEBUG: setting option os.universal_supported to yes
301DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
302DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
303DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
304DEBUG: adding the default universal variant
305DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
306DEBUG: Requested variant darwin is not provided by port xorg-libX11.
307DEBUG: Requested variant i386 is not provided by port xorg-libX11.
308DEBUG: Requested variant macosx is not provided by port xorg-libX11.
309DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-util-macros
310DEBUG: epoch: in tree: 0 installed: 0
311DEBUG: xorg-util-macros 1.4.1_0 exists in the ports tree
312DEBUG: xorg-util-macros 1.4.1_0  is the latest installed
313DEBUG: xorg-util-macros 1.4.1_0  is active
314DEBUG: Merging existing variants  into variants
315DEBUG: new fully merged portvariants:
316DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-util-macros
317DEBUG: OS Platform: darwin
318DEBUG: OS Version: 10.2.0
319DEBUG: Mac OS X Version: 10.6
320DEBUG: System Arch: i386
321DEBUG: setting option os.universal_supported to yes
322DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
323DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
324DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
325DEBUG: 'universal_variant no' specified, so not adding the default universal variant
326DEBUG: Requested variant darwin is not provided by port xorg-util-macros.
327DEBUG: Requested variant i386 is not provided by port xorg-util-macros.
328DEBUG: Requested variant macosx is not provided by port xorg-util-macros.
329DEBUG: No need to upgrade! xorg-util-macros 1.4.1_0 >= xorg-util-macros 1.4.1_0
330DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xtrans
331DEBUG: epoch: in tree: 0 installed: 0
332DEBUG: xorg-xtrans 1.2.5_0 exists in the ports tree
333DEBUG: xorg-xtrans 1.2.5_0  is the latest installed
334DEBUG: xorg-xtrans 1.2.5_0  is active
335DEBUG: Merging existing variants  into variants
336DEBUG: new fully merged portvariants:
337DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xtrans
338DEBUG: OS Platform: darwin
339DEBUG: OS Version: 10.2.0
340DEBUG: Mac OS X Version: 10.6
341DEBUG: System Arch: i386
342DEBUG: setting option os.universal_supported to yes
343DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
344DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
345DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
346DEBUG: 'universal_variant no' specified, so not adding the default universal variant
347DEBUG: Requested variant darwin is not provided by port xorg-xtrans.
348DEBUG: Requested variant i386 is not provided by port xorg-xtrans.
349DEBUG: Requested variant macosx is not provided by port xorg-xtrans.
350DEBUG: No need to upgrade! xorg-xtrans 1.2.5_0 >= xorg-xtrans 1.2.5_0
351DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-bigreqsproto
352DEBUG: epoch: in tree: 0 installed: 0
353DEBUG: xorg-bigreqsproto 1.1.0_0 exists in the ports tree
354DEBUG: xorg-bigreqsproto 1.1.0_0  is the latest installed
355DEBUG: xorg-bigreqsproto 1.1.0_0  is active
356DEBUG: Merging existing variants  into variants
357DEBUG: new fully merged portvariants:
358DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-bigreqsproto
359DEBUG: OS Platform: darwin
360DEBUG: OS Version: 10.2.0
361DEBUG: Mac OS X Version: 10.6
362DEBUG: System Arch: i386
363DEBUG: setting option os.universal_supported to yes
364DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
365DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
366DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
367DEBUG: 'universal_variant no' specified, so not adding the default universal variant
368DEBUG: Requested variant darwin is not provided by port xorg-bigreqsproto.
369DEBUG: Requested variant i386 is not provided by port xorg-bigreqsproto.
370DEBUG: Requested variant macosx is not provided by port xorg-bigreqsproto.
371DEBUG: No need to upgrade! xorg-bigreqsproto 1.1.0_0 >= xorg-bigreqsproto 1.1.0_0
372DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcmiscproto
373DEBUG: epoch: in tree: 0 installed: 0
374DEBUG: xorg-xcmiscproto 1.2.0_0 exists in the ports tree
375DEBUG: xorg-xcmiscproto 1.2.0_0  is the latest installed
376DEBUG: xorg-xcmiscproto 1.2.0_0  is active
377DEBUG: Merging existing variants  into variants
378DEBUG: new fully merged portvariants:
379DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcmiscproto
380DEBUG: OS Platform: darwin
381DEBUG: OS Version: 10.2.0
382DEBUG: Mac OS X Version: 10.6
383DEBUG: System Arch: i386
384DEBUG: setting option os.universal_supported to yes
385DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
386DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
387DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
388DEBUG: 'universal_variant no' specified, so not adding the default universal variant
389DEBUG: Requested variant darwin is not provided by port xorg-xcmiscproto.
390DEBUG: Requested variant i386 is not provided by port xorg-xcmiscproto.
391DEBUG: Requested variant macosx is not provided by port xorg-xcmiscproto.
392DEBUG: No need to upgrade! xorg-xcmiscproto 1.2.0_0 >= xorg-xcmiscproto 1.2.0_0
393DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xf86bigfontproto
394DEBUG: epoch: in tree: 0 installed: 0
395DEBUG: xorg-xf86bigfontproto 1.2.0_0 exists in the ports tree
396DEBUG: xorg-xf86bigfontproto 1.2.0_0  is the latest installed
397DEBUG: xorg-xf86bigfontproto 1.2.0_0  is active
398DEBUG: Merging existing variants  into variants
399DEBUG: new fully merged portvariants:
400DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xf86bigfontproto
401DEBUG: OS Platform: darwin
402DEBUG: OS Version: 10.2.0
403DEBUG: Mac OS X Version: 10.6
404DEBUG: System Arch: i386
405DEBUG: setting option os.universal_supported to yes
406DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
407DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
408DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
409DEBUG: 'universal_variant no' specified, so not adding the default universal variant
410DEBUG: Requested variant darwin is not provided by port xorg-xf86bigfontproto.
411DEBUG: Requested variant i386 is not provided by port xorg-xf86bigfontproto.
412DEBUG: Requested variant macosx is not provided by port xorg-xf86bigfontproto.
413DEBUG: No need to upgrade! xorg-xf86bigfontproto 1.2.0_0 >= xorg-xf86bigfontproto 1.2.0_0
414DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-inputproto
415DEBUG: epoch: in tree: 0 installed: 0
416DEBUG: xorg-inputproto 2.0_0 exists in the ports tree
417DEBUG: xorg-inputproto 2.0_0  is the latest installed
418DEBUG: xorg-inputproto 2.0_0  is active
419DEBUG: Merging existing variants  into variants
420DEBUG: new fully merged portvariants:
421DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-inputproto
422DEBUG: OS Platform: darwin
423DEBUG: OS Version: 10.2.0
424DEBUG: Mac OS X Version: 10.6
425DEBUG: System Arch: i386
426DEBUG: setting option os.universal_supported to yes
427DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
428DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
429DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
430DEBUG: 'universal_variant no' specified, so not adding the default universal variant
431DEBUG: Requested variant darwin is not provided by port xorg-inputproto.
432DEBUG: Requested variant i386 is not provided by port xorg-inputproto.
433DEBUG: Requested variant macosx is not provided by port xorg-inputproto.
434DEBUG: No need to upgrade! xorg-inputproto 2.0_0 >= xorg-inputproto 2.0_0
435DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto
436DEBUG: epoch: in tree: 0 installed: 0
437DEBUG: xorg-kbproto 1.0.4_0 exists in the ports tree
438DEBUG: xorg-kbproto 1.0.4_0  is the latest installed
439DEBUG: xorg-kbproto 1.0.4_0  is active
440DEBUG: Merging existing variants  into variants
441DEBUG: new fully merged portvariants:
442DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto
443DEBUG: OS Platform: darwin
444DEBUG: OS Version: 10.2.0
445DEBUG: Mac OS X Version: 10.6
446DEBUG: System Arch: i386
447DEBUG: setting option os.universal_supported to yes
448DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
449DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
450DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
451DEBUG: 'universal_variant no' specified, so not adding the default universal variant
452DEBUG: Requested variant darwin is not provided by port xorg-kbproto.
453DEBUG: Requested variant i386 is not provided by port xorg-kbproto.
454DEBUG: Requested variant macosx is not provided by port xorg-kbproto.
455DEBUG: No need to upgrade! xorg-kbproto 1.0.4_0 >= xorg-kbproto 1.0.4_0
456DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/groff
457DEBUG: epoch: in tree: 0 installed: 0
458DEBUG: groff 1.20.1_1 exists in the ports tree
459DEBUG: groff 1.20.1_1  is the latest installed
460DEBUG: groff 1.20.1_1  is active
461DEBUG: Merging existing variants  into variants
462DEBUG: new fully merged portvariants:
463DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/groff
464DEBUG: OS Platform: darwin
465DEBUG: OS Version: 10.2.0
466DEBUG: Mac OS X Version: 10.6
467DEBUG: System Arch: i386
468DEBUG: setting option os.universal_supported to yes
469DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
470DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
471DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
472DEBUG: adding the default universal variant
473DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
474DEBUG: Requested variant darwin is not provided by port groff.
475DEBUG: Requested variant i386 is not provided by port groff.
476DEBUG: Requested variant macosx is not provided by port groff.
477DEBUG: No need to upgrade! groff 1.20.1_1 >= groff 1.20.1_1
478DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp
479DEBUG: epoch: in tree: 0 installed: 0
480DEBUG: xorg-libXdmcp 1.0.3_0 exists in the ports tree
481DEBUG: xorg-libXdmcp 1.0.3_0  is the latest installed
482DEBUG: xorg-libXdmcp 1.0.3_0  is active
483DEBUG: Merging existing variants  into variants
484DEBUG: new fully merged portvariants:
485DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp
486DEBUG: OS Platform: darwin
487DEBUG: OS Version: 10.2.0
488DEBUG: Mac OS X Version: 10.6
489DEBUG: System Arch: i386
490DEBUG: setting option os.universal_supported to yes
491DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
492DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
493DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
494DEBUG: adding the default universal variant
495DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
496DEBUG: Requested variant darwin is not provided by port xorg-libXdmcp.
497DEBUG: Requested variant i386 is not provided by port xorg-libXdmcp.
498DEBUG: Requested variant macosx is not provided by port xorg-libXdmcp.
499DEBUG: No need to upgrade! xorg-libXdmcp 1.0.3_0 >= xorg-libXdmcp 1.0.3_0
500DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau
501DEBUG: epoch: in tree: 0 installed: 0
502DEBUG: xorg-libXau 1.0.5_0 exists in the ports tree
503DEBUG: xorg-libXau 1.0.5_0  is the latest installed
504DEBUG: xorg-libXau 1.0.5_0  is active
505DEBUG: Merging existing variants  into variants
506DEBUG: new fully merged portvariants:
507DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau
508DEBUG: OS Platform: darwin
509DEBUG: OS Version: 10.2.0
510DEBUG: Mac OS X Version: 10.6
511DEBUG: System Arch: i386
512DEBUG: setting option os.universal_supported to yes
513DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
514DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
515DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
516DEBUG: adding the default universal variant
517DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
518DEBUG: Requested variant darwin is not provided by port xorg-libXau.
519DEBUG: Requested variant i386 is not provided by port xorg-libXau.
520DEBUG: Requested variant macosx is not provided by port xorg-libXau.
521DEBUG: No need to upgrade! xorg-libXau 1.0.5_0 >= xorg-libXau 1.0.5_0
522DEBUG: No need to upgrade! xorg-libX11 1.3.2_0 >= xorg-libX11 1.3.2_0
523DEBUG: No need to upgrade! xorg-libXext 1.1.1_0 >= xorg-libXext 1.1.1_0
524DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXrandr
525DEBUG: epoch: in tree: 0 installed: 0
526DEBUG: xorg-libXrandr 1.3.0_1 exists in the ports tree
527DEBUG: xorg-libXrandr 1.3.0_1  is the latest installed
528DEBUG: xorg-libXrandr 1.3.0_1  is active
529DEBUG: Merging existing variants  into variants
530DEBUG: new fully merged portvariants:
531DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXrandr
532DEBUG: OS Platform: darwin
533DEBUG: OS Version: 10.2.0
534DEBUG: Mac OS X Version: 10.6
535DEBUG: System Arch: i386
536DEBUG: setting option os.universal_supported to yes
537DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
538DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
539DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
540DEBUG: adding the default universal variant
541DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
542DEBUG: Requested variant darwin is not provided by port xorg-libXrandr.
543DEBUG: Requested variant i386 is not provided by port xorg-libXrandr.
544DEBUG: Requested variant macosx is not provided by port xorg-libXrandr.
545DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender
546DEBUG: epoch: in tree: 0 installed: 0
547DEBUG: xrender 0.9.5_0 exists in the ports tree
548DEBUG: xrender 0.9.5_0  is the latest installed
549DEBUG: xrender 0.9.5_0  is active
550DEBUG: Merging existing variants  into variants
551DEBUG: new fully merged portvariants:
552DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender
553DEBUG: OS Platform: darwin
554DEBUG: OS Version: 10.2.0
555DEBUG: Mac OS X Version: 10.6
556DEBUG: System Arch: i386
557DEBUG: setting option os.universal_supported to yes
558DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
559DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
560DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
561DEBUG: adding the default universal variant
562DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
563DEBUG: Requested variant darwin is not provided by port xrender.
564DEBUG: Requested variant i386 is not provided by port xrender.
565DEBUG: Requested variant macosx is not provided by port xrender.
566DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-renderproto
567DEBUG: epoch: in tree: 0 installed: 0
568DEBUG: xorg-renderproto 0.11_0 exists in the ports tree
569DEBUG: xorg-renderproto 0.11_0  is the latest installed
570DEBUG: xorg-renderproto 0.11_0  is active
571DEBUG: Merging existing variants  into variants
572DEBUG: new fully merged portvariants:
573DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-renderproto
574DEBUG: OS Platform: darwin
575DEBUG: OS Version: 10.2.0
576DEBUG: Mac OS X Version: 10.6
577DEBUG: System Arch: i386
578DEBUG: setting option os.universal_supported to yes
579DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
580DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
581DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
582DEBUG: 'universal_variant no' specified, so not adding the default universal variant
583DEBUG: Requested variant darwin is not provided by port xorg-renderproto.
584DEBUG: Requested variant i386 is not provided by port xorg-renderproto.
585DEBUG: Requested variant macosx is not provided by port xorg-renderproto.
586DEBUG: No need to upgrade! xorg-renderproto 0.11_0 >= xorg-renderproto 0.11_0
587DEBUG: No need to upgrade! xrender 0.9.5_0 >= xrender 0.9.5_0
588DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-randrproto
589DEBUG: epoch: in tree: 0 installed: 0
590DEBUG: xorg-randrproto 1.3.1_0 exists in the ports tree
591DEBUG: xorg-randrproto 1.3.1_0  is the latest installed
592DEBUG: xorg-randrproto 1.3.1_0  is active
593DEBUG: Merging existing variants  into variants
594DEBUG: new fully merged portvariants:
595DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-randrproto
596DEBUG: OS Platform: darwin
597DEBUG: OS Version: 10.2.0
598DEBUG: Mac OS X Version: 10.6
599DEBUG: System Arch: i386
600DEBUG: setting option os.universal_supported to yes
601DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
602DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
603DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
604DEBUG: 'universal_variant no' specified, so not adding the default universal variant
605DEBUG: Requested variant darwin is not provided by port xorg-randrproto.
606DEBUG: Requested variant i386 is not provided by port xorg-randrproto.
607DEBUG: Requested variant macosx is not provided by port xorg-randrproto.
608DEBUG: No need to upgrade! xorg-randrproto 1.3.1_0 >= xorg-randrproto 1.3.1_0
609DEBUG: No need to upgrade! xorg-libXrandr 1.3.0_1 >= xorg-libXrandr 1.3.0_1
610DEBUG: No need to upgrade! libsdl 1.2.14_8 >= libsdl 1.2.14_8
611DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/libsdl_mixer
612DEBUG: epoch: in tree: 0 installed: 0
613DEBUG: libsdl_mixer 1.2.11_0 exists in the ports tree
614DEBUG: libsdl_mixer 1.2.11_0  is the latest installed
615DEBUG: libsdl_mixer 1.2.11_0  is active
616DEBUG: Merging existing variants  into variants
617DEBUG: new fully merged portvariants:
618DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/libsdl_mixer
619DEBUG: OS Platform: darwin
620DEBUG: OS Version: 10.2.0
621DEBUG: Mac OS X Version: 10.6
622DEBUG: System Arch: i386
623DEBUG: setting option os.universal_supported to yes
624DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
625DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
626DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
627DEBUG: adding the default universal variant
628DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
629DEBUG: Requested variant darwin is not provided by port libsdl_mixer.
630DEBUG: Requested variant i386 is not provided by port libsdl_mixer.
631DEBUG: Requested variant macosx is not provided by port libsdl_mixer.
632DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/smpeg
633DEBUG: epoch: in tree: 0 installed: 0
634DEBUG: smpeg 0.4.4_8 exists in the ports tree
635DEBUG: smpeg 0.4.4_8  is the latest installed
636DEBUG: smpeg 0.4.4_8  is active
637DEBUG: Merging existing variants  into variants
638DEBUG: new fully merged portvariants:
639DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/smpeg
640DEBUG: OS Platform: darwin
641DEBUG: OS Version: 10.2.0
642DEBUG: Mac OS X Version: 10.6
643DEBUG: System Arch: i386
644DEBUG: setting option os.universal_supported to yes
645DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
646DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
647DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
648DEBUG: adding the default universal variant
649DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
650DEBUG: Requested variant darwin is not provided by port smpeg.
651DEBUG: Requested variant i386 is not provided by port smpeg.
652DEBUG: Requested variant macosx is not provided by port smpeg.
653DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
654DEBUG: epoch: in tree: 0 installed: 0
655DEBUG: libtool 2.2.6b_0 exists in the ports tree
656DEBUG: libtool 2.2.6b_0  is the latest installed
657DEBUG: libtool 2.2.6b_0  is active
658DEBUG: Merging existing variants  into variants
659DEBUG: new fully merged portvariants:
660DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
661DEBUG: OS Platform: darwin
662DEBUG: OS Version: 10.2.0
663DEBUG: Mac OS X Version: 10.6
664DEBUG: System Arch: i386
665DEBUG: setting option os.universal_supported to yes
666DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
667DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
668DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
669DEBUG: adding the default universal variant
670DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
671DEBUG: Requested variant darwin is not provided by port libtool.
672DEBUG: Requested variant i386 is not provided by port libtool.
673DEBUG: Requested variant macosx is not provided by port libtool.
674DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
675DEBUG: epoch: in tree: 0 installed: 0
676DEBUG: automake 1.11.1_0 exists in the ports tree
677DEBUG: automake 1.11.1_0  is the latest installed
678DEBUG: automake 1.11.1_0  is active
679DEBUG: Merging existing variants  into variants
680DEBUG: new fully merged portvariants:
681DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
682DEBUG: OS Platform: darwin
683DEBUG: OS Version: 10.2.0
684DEBUG: Mac OS X Version: 10.6
685DEBUG: System Arch: i386
686DEBUG: setting option os.universal_supported to yes
687DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
688DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
689DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
690DEBUG: adding the default universal variant
691DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
692DEBUG: Requested variant darwin is not provided by port automake.
693DEBUG: Requested variant i386 is not provided by port automake.
694DEBUG: Requested variant macosx is not provided by port automake.
695DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
696DEBUG: epoch: in tree: 0 installed: 0
697DEBUG: autoconf 2.65_0 exists in the ports tree
698DEBUG: autoconf 2.65_0  is the latest installed
699DEBUG: autoconf 2.65_0  is active
700DEBUG: Merging existing variants  into variants
701DEBUG: new fully merged portvariants:
702DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
703DEBUG: OS Platform: darwin
704DEBUG: OS Version: 10.2.0
705DEBUG: Mac OS X Version: 10.6
706DEBUG: System Arch: i386
707DEBUG: setting option os.universal_supported to yes
708DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
709DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
710DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
711DEBUG: 'universal_variant no' specified, so not adding the default universal variant
712DEBUG: Requested variant darwin is not provided by port autoconf.
713DEBUG: Requested variant i386 is not provided by port autoconf.
714DEBUG: Requested variant macosx is not provided by port autoconf.
715DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
716DEBUG: epoch: in tree: 0 installed: 0
717DEBUG: perl5 5.8.9_0 exists in the ports tree
718DEBUG: perl5 5.8.9_0  is the latest installed
719DEBUG: perl5 5.8.9_0  is active
720DEBUG: Merging existing variants  into variants
721DEBUG: new fully merged portvariants:
722DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
723DEBUG: OS Platform: darwin
724DEBUG: OS Version: 10.2.0
725DEBUG: Mac OS X Version: 10.6
726DEBUG: System Arch: i386
727DEBUG: setting option os.universal_supported to yes
728DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
729DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
730DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
731DEBUG: 'universal_variant no' specified, so not adding the default universal variant
732DEBUG: Requested variant darwin is not provided by port perl5.
733DEBUG: Requested variant i386 is not provided by port perl5.
734DEBUG: Requested variant macosx is not provided by port perl5.
735DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
736DEBUG: epoch: in tree: 0 installed: 0
737DEBUG: perl5.8 5.8.9_3 exists in the ports tree
738DEBUG: perl5.8 5.8.9_3  is the latest installed
739DEBUG: perl5.8 5.8.9_3  is active
740DEBUG: Merging existing variants  into variants
741DEBUG: new fully merged portvariants:
742DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
743DEBUG: OS Platform: darwin
744DEBUG: OS Version: 10.2.0
745DEBUG: Mac OS X Version: 10.6
746DEBUG: System Arch: i386
747DEBUG: setting option os.universal_supported to yes
748DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
749DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
750DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
751DEBUG: 'universal_variant no' specified, so not adding the default universal variant
752DEBUG: Requested variant darwin is not provided by port perl5.8.
753DEBUG: Requested variant i386 is not provided by port perl5.8.
754DEBUG: Requested variant macosx is not provided by port perl5.8.
755DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3
756DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0
757DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
758DEBUG: epoch: in tree: 0 installed: 0
759DEBUG: m4 1.4.13_0 exists in the ports tree
760DEBUG: m4 1.4.13_0  is the latest installed
761DEBUG: m4 1.4.13_0  is active
762DEBUG: Merging existing variants  into variants
763DEBUG: new fully merged portvariants:
764DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
765DEBUG: OS Platform: darwin
766DEBUG: OS Version: 10.2.0
767DEBUG: Mac OS X Version: 10.6
768DEBUG: System Arch: i386
769DEBUG: setting option os.universal_supported to yes
770DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
771DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
772DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
773DEBUG: adding the default universal variant
774DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
775DEBUG: Requested variant darwin is not provided by port m4.
776DEBUG: Requested variant i386 is not provided by port m4.
777DEBUG: Requested variant macosx is not provided by port m4.
778DEBUG: No need to upgrade! m4 1.4.13_0 >= m4 1.4.13_0
779DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
780DEBUG: epoch: in tree: 0 installed: 0
781DEBUG: help2man 1.36.4_1 exists in the ports tree
782DEBUG: help2man 1.36.4_1  is the latest installed
783DEBUG: help2man 1.36.4_1  is active
784DEBUG: Merging existing variants  into variants
785DEBUG: new fully merged portvariants:
786DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
787DEBUG: OS Platform: darwin
788DEBUG: OS Version: 10.2.0
789DEBUG: Mac OS X Version: 10.6
790DEBUG: System Arch: i386
791DEBUG: setting option os.universal_supported to yes
792DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
793DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
794DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
795DEBUG: adding the default universal variant
796DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
797DEBUG: Requested variant darwin is not provided by port help2man.
798DEBUG: Requested variant i386 is not provided by port help2man.
799DEBUG: Requested variant macosx is not provided by port help2man.
800DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext
801DEBUG: epoch: in tree: 0 installed: 0
802DEBUG: p5-locale-gettext 1.05_0 exists in the ports tree
803DEBUG: p5-locale-gettext 1.05_0  is the latest installed
804DEBUG: p5-locale-gettext 1.05_0  is active
805DEBUG: Merging existing variants  into variants
806DEBUG: new fully merged portvariants:
807DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext
808DEBUG: OS Platform: darwin
809DEBUG: OS Version: 10.2.0
810DEBUG: Mac OS X Version: 10.6
811DEBUG: System Arch: i386
812DEBUG: setting option os.universal_supported to yes
813DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
814DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
815DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
816DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
817DEBUG: 'universal_variant no' specified, so not adding the default universal variant
818DEBUG: Requested variant darwin is not provided by port p5-locale-gettext.
819DEBUG: Requested variant i386 is not provided by port p5-locale-gettext.
820DEBUG: Requested variant macosx is not provided by port p5-locale-gettext.
821DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
822DEBUG: epoch: in tree: 0 installed: 0
823DEBUG: gettext 0.17_4 exists in the ports tree
824DEBUG: gettext 0.17_4  is the latest installed
825DEBUG: gettext 0.17_4  is active
826DEBUG: Merging existing variants  into variants
827DEBUG: new fully merged portvariants:
828DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
829DEBUG: OS Platform: darwin
830DEBUG: OS Version: 10.2.0
831DEBUG: Mac OS X Version: 10.6
832DEBUG: System Arch: i386
833DEBUG: setting option os.universal_supported to yes
834DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
835DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
836DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
837DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
838DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
839DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
840DEBUG: universal variant already exists, so not adding the default one
841DEBUG: Requested variant darwin is not provided by port gettext.
842DEBUG: Requested variant i386 is not provided by port gettext.
843DEBUG: Requested variant macosx is not provided by port gettext.
844DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
845DEBUG: epoch: in tree: 0 installed: 0
846DEBUG: ncurses 5.7_0 exists in the ports tree
847DEBUG: ncurses 5.7_0 +darwin_10 is the latest installed
848DEBUG: ncurses 5.7_0 +darwin_10 is active
849DEBUG: Merging existing variants darwin_10 into variants
850DEBUG: new fully merged portvariants:
851DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
852DEBUG: OS Platform: darwin
853DEBUG: OS Version: 10.2.0
854DEBUG: Mac OS X Version: 10.6
855DEBUG: System Arch: i386
856DEBUG: setting option os.universal_supported to yes
857DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
858DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
859DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
860DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
861DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
862DEBUG: universal variant already exists, so not adding the default one
863DEBUG: Requested variant darwin is not provided by port ncurses.
864DEBUG: Requested variant i386 is not provided by port ncurses.
865DEBUG: Requested variant macosx is not provided by port ncurses.
866DEBUG: Executing variant darwin_10 provides darwin_10
867DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
868DEBUG: epoch: in tree: 0 installed: 0
869DEBUG: ncursesw 5.7_0 exists in the ports tree
870DEBUG: ncursesw 5.7_0 +darwin_10 is the latest installed
871DEBUG: ncursesw 5.7_0 +darwin_10 is active
872DEBUG: Merging existing variants darwin_10 into variants
873DEBUG: new fully merged portvariants:
874DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
875DEBUG: OS Platform: darwin
876DEBUG: OS Version: 10.2.0
877DEBUG: Mac OS X Version: 10.6
878DEBUG: System Arch: i386
879DEBUG: setting option os.universal_supported to yes
880DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
881DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
882DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
883DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
884DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
885DEBUG: universal variant already exists, so not adding the default one
886DEBUG: Requested variant darwin is not provided by port ncursesw.
887DEBUG: Requested variant i386 is not provided by port ncursesw.
888DEBUG: Requested variant macosx is not provided by port ncursesw.
889DEBUG: Executing variant darwin_10 provides darwin_10
890DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
891DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
892DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4
893DEBUG: No need to upgrade! p5-locale-gettext 1.05_0 >= p5-locale-gettext 1.05_0
894DEBUG: No need to upgrade! help2man 1.36.4_1 >= help2man 1.36.4_1
895DEBUG: No need to upgrade! autoconf 2.65_0 >= autoconf 2.65_0
896DEBUG: No need to upgrade! automake 1.11.1_0 >= automake 1.11.1_0
897DEBUG: No need to upgrade! libtool 2.2.6b_0 >= libtool 2.2.6b_0
898DEBUG: No need to upgrade! smpeg 0.4.4_8 >= smpeg 0.4.4_8
899DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/libvorbis
900DEBUG: epoch: in tree: 0 installed: 0
901DEBUG: libvorbis 1.2.3_0 exists in the ports tree
902DEBUG: libvorbis 1.2.3_0  is the latest installed
903DEBUG: libvorbis 1.2.3_0  is active
904DEBUG: Merging existing variants  into variants
905DEBUG: new fully merged portvariants:
906DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/libvorbis
907DEBUG: OS Platform: darwin
908DEBUG: OS Version: 10.2.0
909DEBUG: Mac OS X Version: 10.6
910DEBUG: System Arch: i386
911DEBUG: setting option os.universal_supported to yes
912DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
913DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
914DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
915DEBUG: adding the default universal variant
916DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
917DEBUG: Requested variant darwin is not provided by port libvorbis.
918DEBUG: Requested variant i386 is not provided by port libvorbis.
919DEBUG: Requested variant macosx is not provided by port libvorbis.
920DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/libogg
921DEBUG: epoch: in tree: 0 installed: 0
922DEBUG: libogg 1.1.4_0 exists in the ports tree
923DEBUG: libogg 1.1.4_0  is the latest installed
924DEBUG: libogg 1.1.4_0  is active
925DEBUG: Merging existing variants  into variants
926DEBUG: new fully merged portvariants:
927DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/libogg
928DEBUG: OS Platform: darwin
929DEBUG: OS Version: 10.2.0
930DEBUG: Mac OS X Version: 10.6
931DEBUG: System Arch: i386
932DEBUG: setting option os.universal_supported to yes
933DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
934DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
935DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
936DEBUG: adding the default universal variant
937DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
938DEBUG: Requested variant darwin is not provided by port libogg.
939DEBUG: Requested variant i386 is not provided by port libogg.
940DEBUG: Requested variant macosx is not provided by port libogg.
941DEBUG: No need to upgrade! libogg 1.1.4_0 >= libogg 1.1.4_0
942DEBUG: No need to upgrade! libvorbis 1.2.3_0 >= libvorbis 1.2.3_0
943DEBUG: No need to upgrade! libsdl_mixer 1.2.11_0 >= libsdl_mixer 1.2.11_0
944--->  Computing dependencies for wxWidgets
945DEBUG: Searching for dependency: jpeg
946DEBUG: Found Dependency: receipt exists for jpeg
947DEBUG: Searching for dependency: tiff
948DEBUG: Found Dependency: receipt exists for tiff
949DEBUG: Searching for dependency: libpng
950DEBUG: Found Dependency: receipt exists for libpng
951DEBUG: Searching for dependency: zlib
952DEBUG: Found Dependency: receipt exists for zlib
953DEBUG: Searching for dependency: libiconv
954DEBUG: Found Dependency: receipt exists for libiconv
955DEBUG: Searching for dependency: expat
956DEBUG: Found Dependency: receipt exists for expat
957DEBUG: Searching for dependency: libsdl
958DEBUG: Found Dependency: receipt exists for libsdl
959DEBUG: Searching for dependency: libsdl_mixer
960DEBUG: Found Dependency: receipt exists for libsdl_mixer
961DEBUG: Executing org.macports.main (wxWidgets)
962DEBUG: Skipping completed org.macports.fetch (wxWidgets)
963DEBUG: Skipping completed org.macports.checksum (wxWidgets)
964DEBUG: setting option extract.cmd to /usr/bin/bzip2
965DEBUG: Skipping completed org.macports.extract (wxWidgets)
966DEBUG: Skipping completed org.macports.patch (wxWidgets)
967DEBUG: Skipping completed org.macports.configure (wxWidgets)
968--->  Building wxWidgets
969DEBUG: Executing org.macports.build (wxWidgets)
970DEBUG: port disallows a parallel build
971DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.6'
972DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_wxWidgets/work/wxWidgets-2.8.9/build" && /usr/bin/make'
973/usr/bin/g++-4.2 -dynamiclib -single_module -headerpad_max_install_names -o /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_wxWidgets/work/wxWidgets-2.8.9/build/lib/libwx_macu-2.8.0.5.0.dylib  monodll_appbase.o monodll_arcall.o monodll_arcfind.o monodll_archive.o monodll_clntdata.o monodll_cmdline.o monodll_config.o monodll_convauto.o monodll_datetime.o monodll_datstrm.o monodll_dircmn.o monodll_dynarray.o monodll_dynlib.o monodll_dynload.o monodll_encconv.o monodll_extended.o monodll_ffile.o monodll_file.o monodll_fileback.o monodll_fileconf.o monodll_filefn.o monodll_filename.o monodll_filesys.o monodll_filtall.o monodll_filtfind.o monodll_fmapbase.o monodll_fs_arc.o monodll_fs_filter.o monodll_hash.o monodll_hashmap.o monodll_init.o monodll_intl.o monodll_ipcbase.o monodll_list.o monodll_log.o monodll_longlong.o monodll_memory.o monodll_mimecmn.o monodll_module.o monodll_mstream.o monodll_object.o monodll_platinfo.o monodll_powercmn.o monodll_process.o monodll_regex.o monodll_stdpbase.o monodll_sstream.o monodll_stopwatch.o monodll_strconv.o monodll_stream.o monodll_string.o monodll_sysopt.o monodll_tarstrm.o monodll_textbuf.o monodll_textfile.o monodll_tokenzr.o monodll_txtstrm.o monodll_uri.o monodll_variant.o monodll_wfstream.o monodll_wxchar.o monodll_xti.o monodll_xtistrm.o monodll_zipstrm.o monodll_zstream.o monodll_dirmac.o monodll_mimetmac.o monodll_utilsexc.o monodll_thread.o monodll_macnotfy.o monodll_MoreFilesX.o monodll_cfstring.o monodll_stdpaths_cf.o monodll_utilsexc_base.o monodll_baseunix.o monodll_dlunix.o monodll_snglinst.o monodll_stdpaths.o monodll_event.o monodll_fs_mem.o monodll_msgout.o monodll_utilscmn.o monodll_utilsunx.o monodll_utils.o monodll_uma.o monodll_fs_inet.o monodll_ftp.o monodll_http.o monodll_protocol.o monodll_sckaddr.o monodll_sckfile.o monodll_sckipc.o monodll_sckstrm.o monodll_socket.o monodll_url.o monodll_gsocket.o monodll_glgrab.o monodll_gsockosx.o monodll_hid.o monodll_utilsexc_cf.o monodll_accel.o monodll_aga.o monodll_app.o monodll_bitmap.o monodll_bmpbuttn.o monodll_brush.o monodll_button.o monodll_checkbox.o monodll_checklst.o monodll_choice.o monodll_clipbrd.o monodll_colordlg.o monodll_colour.o monodll_combobox.o monodll_control.o monodll_cursor.o monodll_data.o monodll_dataobj.o monodll_dc.o monodll_dccg.o monodll_dcclient.o monodll_dcmemory.o monodll_dcprint.o monodll_dcscreen.o monodll_dialog.o monodll_dirdlg.o monodll_display.o monodll_dnd.o monodll_evtloop.o monodll_filedlg.o monodll_font.o monodll_fontdlg.o monodll_fontenum.o monodll_fontutil.o monodll_frame.o monodll_gauge.o monodll_gdiobj.o monodll_graphics.o monodll_icon.o monodll_imaglist.o monodll_listbox.o monodll_listctrl_mac.o monodll_mdi.o monodll_menu.o monodll_menuitem.o monodll_metafile.o monodll_minifram.o monodll_msgdlg.o monodll_notebmac.o monodll_overlay.o monodll_palette.o monodll_pen.o monodll_printdlg.o monodll_printmac.o monodll_radiobox.o monodll_radiobut.o monodll_region.o monodll_renderer.o monodll_scrolbar.o monodll_settings.o monodll_slider.o monodll_spinbutt.o monodll_spinctrl.o monodll_srchctrl.o monodll_statbmp.o monodll_statbox.o monodll_statbrma.o monodll_statlmac.o monodll_stattext.o monodll_tabctrl.o monodll_textctrl.o monodll_timer.o monodll_tglbtn.o monodll_toolbar.o monodll_tooltip.o monodll_toplevel.o monodll_window.o monodll_caret.o monodll_fdrepdlg.o monodll_fontdlgg.o monodll_listctrl.o monodll_prntdlgg.o monodll_statusbr.o monodll_tabg.o monodll_webkit.o monodll_fontdlgosx.o monodll_colordlgosx.o monodll_utilscocoa.o monodll_accesscmn.o monodll_anidecod.o monodll_appcmn.o monodll_artprov.o monodll_artstd.o monodll_bmpbase.o monodll_bookctrl.o monodll_choiccmn.o monodll_clipcmn.o monodll_clrpickercmn.o monodll_colourcmn.o monodll_combocmn.o monodll_cmdproc.o monodll_cmndata.o monodll_containr.o monodll_cshelp.o monodll_ctrlcmn.o monodll_ctrlsub.o monodll_datacmn.o monodll_dcbase.o monodll_dcbufcmn.o monodll_dcgraph.o monodll_dlgcmn.o monodll_dndcmn.o monodll_dobjcmn.o monodll_docmdi.o monodll_docview.o monodll_dpycmn.o monodll_dseldlg.o monodll_effects.o monodll_evtloopcmn.o monodll_fddlgcmn.o monodll_filepickercmn.o monodll_fontpickercmn.o monodll_fldlgcmn.o monodll_fontcmn.o monodll_fontenumcmn.o monodll_fontmap.o monodll_framecmn.o monodll_gaugecmn.o monodll_gbsizer.o monodll_gdicmn.o monodll_geometry.o monodll_gifdecod.o monodll_graphcmn.o monodll_helpbase.o monodll_iconbndl.o monodll_imagall.o monodll_imagbmp.o monodll_image.o monodll_imagfill.o monodll_imaggif.o monodll_imagiff.o monodll_imagjpeg.o monodll_imagpcx.o monodll_imagpng.o monodll_imagpnm.o monodll_imagtga.o monodll_imagtiff.o monodll_imagxpm.o monodll_layout.o monodll_lboxcmn.o monodll_listctrlcmn.o monodll_matrix.o monodll_menucmn.o monodll_nbkbase.o monodll_overlaycmn.o monodll_paper.o monodll_pickerbase.o monodll_popupcmn.o monodll_prntbase.o monodll_quantize.o monodll_radiocmn.o monodll_rendcmn.o monodll_rgncmn.o monodll_settcmn.o monodll_sizer.o monodll_srchcmn.o monodll_statbar.o monodll_stockitem.o monodll_tbarbase.o monodll_textcmn.o monodll_timercmn.o monodll_toplvcmn.o monodll_treebase.o monodll_valgen.o monodll_validate.o monodll_valtext.o monodll_wincmn.o monodll_xpmdecod.o monodll_busyinfo.o monodll_buttonbar.o monodll_choicdgg.o monodll_choicbkg.o monodll_clrpickerg.o monodll_collpaneg.o monodll_combog.o monodll_dcpsg.o monodll_dirctrlg.o monodll_dragimgg.o monodll_filepickerg.o monodll_fontpickerg.o monodll_listbkg.o monodll_logg.o monodll_numdlgg.o monodll_panelg.o monodll_progdlgg.o monodll_printps.o monodll_renderg.o monodll_scrlwing.o monodll_selstore.o monodll_spinctlg.o monodll_splitter.o monodll_srchctlg.o monodll_textdlgg.o monodll_tipwin.o monodll_toolbkg.o monodll_treectlg.o monodll_treebkg.o monodll_vlbox.o monodll_vscroll.o monodll_animatecmn.o monodll_datavcmn.o monodll_aboutdlgg.o monodll_animateg.o monodll_bmpcboxg.o monodll_calctrl.o monodll_datavgen.o monodll_datectlg.o monodll_grid.o monodll_gridctrl.o monodll_gridsel.o monodll_helpext.o monodll_hyperlink.o monodll_laywin.o monodll_odcombo.o monodll_propdlg.o monodll_sashwin.o monodll_splash.o monodll_tipdlg.o monodll_wizard.o monodll_taskbarcmn.o monodll_aboutdlg.o monodll_drawer.o monodll_sound.o monodll_taskbar.o monodll_hidjoystick.o  monodll_mediactrlcmn.o monodll_mediactrl.o monodll_chm.o monodll_helpctrl.o monodll_helpdata.o monodll_helpdlg.o monodll_helpfrm.o monodll_helpwnd.o monodll_htmlcell.o monodll_htmlfilt.o monodll_htmlpars.o monodll_htmltag.o monodll_htmlwin.o monodll_htmprint.o monodll_m_dflist.o monodll_m_fonts.o monodll_m_hline.o monodll_m_image.o monodll_m_layout.o monodll_m_links.o monodll_m_list.o monodll_m_pre.o monodll_m_style.o monodll_m_tables.o monodll_winpars.o monodll_htmllbox.o monodll_db.o monodll_dbtable.o monodll_debugrpt.o monodll_dbgrptg.o monodll_dbgrid.o monodll_xh_animatctrl.o monodll_xh_bmp.o monodll_xh_bmpcbox.o monodll_xh_bmpbt.o monodll_xh_bttn.o monodll_xh_cald.o monodll_xh_chckb.o monodll_xh_chckl.o monodll_xh_choic.o monodll_xh_choicbk.o monodll_xh_clrpicker.o monodll_xh_collpane.o monodll_xh_combo.o monodll_xh_datectrl.o monodll_xh_dirpicker.o monodll_xh_dlg.o monodll_xh_frame.o monodll_xh_mdi.o monodll_xh_filepicker.o monodll_xh_fontpicker.o monodll_xh_gauge.o monodll_xh_gdctl.o monodll_xh_grid.o monodll_xh_html.o monodll_xh_hyperlink.o monodll_xh_listb.o monodll_xh_listbk.o monodll_xh_listc.o monodll_xh_menu.o monodll_xh_notbk.o monodll_xh_odcombo.o monodll_xh_panel.o monodll_xh_propdlg.o monodll_xh_radbt.o monodll_xh_radbx.o monodll_xh_scrol.o monodll_xh_scwin.o monodll_xh_htmllbox.o monodll_xh_sizer.o monodll_xh_slidr.o monodll_xh_spin.o monodll_xh_split.o monodll_xh_statbar.o monodll_xh_stbmp.o monodll_xh_stbox.o monodll_xh_stlin.o monodll_xh_sttxt.o monodll_xh_text.o monodll_xh_tglbtn.o monodll_xh_toolb.o monodll_xh_tree.o monodll_xh_treebk.o monodll_xh_unkwn.o monodll_xh_wizrd.o monodll_xmlres.o monodll_xmlrsall.o monodll_framemanager.o monodll_dockart.o monodll_floatpane.o monodll_auibook.o monodll_tabmdi.o monodll_auibar.o monodll_richtextctrl.o monodll_richtextbuffer.o monodll_richtextstyles.o monodll_richtextxml.o monodll_richtexthtml.o monodll_richtextformatdlg.o monodll_richtextsymboldlg.o monodll_richtextstyledlg.o monodll_richtextprint.o monodll_xml.o monodll_xtixml.o  -arch i386 -L/opt/local/lib -framework IOKit -framework Carbon -framework Cocoa -framework System -framework QuickTime -framework OpenGL -framework AGL    -L/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_wxWidgets/work/wxWidgets-2.8.9/build/lib -install_name /opt/local/lib/libwx_macu-2.8.0.dylib   -compatibility_version 6.0 -current_version 6.0  -lz -lpthread -lwxtiff-2.8 -lwxjpeg-2.8 -lwxpng-2.8    -lwxregexu-2.8  -arch i386 -L/opt/local/lib -framework IOKit -framework Carbon -framework Cocoa -framework System -framework QuickTime -framework OpenGL -framework AGL  -lz -lpthread  -framework WebKit -lexpat    -L/opt/local/lib -lSDLmain -lSDL -Wl,-framework,Cocoa
974ld: warning: in /opt/local/lib/libz.dylib, file is not of required architecture
975ld: warning: in /opt/local/lib/libexpat.dylib, file is not of required architecture
976ld: warning: in /opt/local/lib/libSDLmain.a, file is not of required architecture
977ld: warning: in /opt/local/lib/libSDL.dylib, file is not of required architecture
978Undefined symbols:
979  "_XML_SetDefaultHandler", referenced from:
980      wxXmlDocument::Load(wxInputStream&, wxString const&, int)in monodll_xml.o
981  "_inflateInit_", referenced from:
982      _png_create_read_struct_2 in libwxpng-2.8.a(wxpng_pngread.o)
983      _png_read_init_3 in libwxpng-2.8.a(wxpng_pngread.o)
984  "_deflateEnd", referenced from:
985      wxZlibOutputStream::Close()      in monodll_zstream.o
986      _png_write_destroy in libwxpng-2.8.a(wxpng_pngwrite.o)
987  "_XML_SetCommentHandler", referenced from:
988      wxXmlDocument::Load(wxInputStream&, wxString const&, int)in monodll_xml.o
989  "_inflateReset", referenced from:
990      wxZlibInputStream2::Open(wxInputStream&)       in monodll_zipstrm.o
991      _png_reset_zstream in libwxpng-2.8.a(wxpng_png.o)
992      _png_read_finish_row in libwxpng-2.8.a(wxpng_pngrutil.o)
993      _png_decompress_chunk in libwxpng-2.8.a(wxpng_pngrutil.o)
994      _png_decompress_chunk in libwxpng-2.8.a(wxpng_pngrutil.o)
995  "_inflateEnd", referenced from:
996      wxZlibInputStream::~wxZlibInputStream()in monodll_zstream.o
997      wxZlibInputStream::~wxZlibInputStream()in monodll_zstream.o
998      _png_read_destroy in libwxpng-2.8.a(wxpng_pngread.o)
999  "_XML_GetCurrentLineNumber", referenced from:
1000      wxXmlDocument::Load(wxInputStream&, wxString const&, int)in monodll_xml.o
1001  "_XML_ErrorString", referenced from:
1002      wxXmlDocument::Load(wxInputStream&, wxString const&, int)in monodll_xml.o
1003  "_inflateInit2_", referenced from:
1004      wxZlibInputStream::Init(int)   in monodll_zstream.o
1005  "_XML_SetElementHandler", referenced from:
1006      wxXmlDocument::Load(wxInputStream&, wxString const&, int)in monodll_xml.o
1007  "_XML_SetCharacterDataHandler", referenced from:
1008      wxXmlDocument::Load(wxInputStream&, wxString const&, int)in monodll_xml.o
1009  "_crc32", referenced from:
1010      wxZipInputStream::OpenDecompressor(bool)   in monodll_zipstrm.o
1011      wxZipOutputStream::CreatePendingEntry()       in monodll_zipstrm.o
1012      wxZipOutputStream::OnSysWrite(void const*, unsigned long)in monodll_zipstrm.o
1013      wxZipOutputStream::DoCreate(wxZipEntry*, bool)  in monodll_zipstrm.o
1014      wxZipInputStream::OnSysRead(void*, unsigned long)in monodll_zipstrm.o
1015      _png_calculate_crc in libwxpng-2.8.a(wxpng_png.o)
1016      _png_reset_crc in libwxpng-2.8.a(wxpng_png.o)
1017  "_deflateReset", referenced from:
1018      wxZlibOutputStream2::Open(wxOutputStream&)       in monodll_zipstrm.o
1019      _png_write_compressed_data_out in libwxpng-2.8.a(wxpng_pngwutil.o)
1020      _png_write_finish_row in libwxpng-2.8.a(wxpng_pngwutil.o)
1021      _png_write_finish_row in libwxpng-2.8.a(wxpng_pngwutil.o)
1022  "_XML_ParserCreate", referenced from:
1023      wxXmlDocument::Load(wxInputStream&, wxString const&, int)in monodll_xml.o
1024  "_XML_Parse", referenced from:
1025      wxXmlDocument::Load(wxInputStream&, wxString const&, int)in monodll_xml.o
1026  "_XML_SetUnknownEncodingHandler", referenced from:
1027      wxXmlDocument::Load(wxInputStream&, wxString const&, int)in monodll_xml.o
1028  "_deflate", referenced from:
1029      wxZlibOutputStream::DoFlush(bool)  in monodll_zstream.o
1030      wxZlibOutputStream::OnSysWrite(void const*, unsigned long)in monodll_zstream.o
1031      _png_write_flush in libwxpng-2.8.a(wxpng_pngwrite.o)
1032      _png_write_finish_row in libwxpng-2.8.a(wxpng_pngwutil.o)
1033      _png_write_filtered_row in libwxpng-2.8.a(wxpng_pngwutil.o)
1034      _png_text_compress in libwxpng-2.8.a(wxpng_pngwutil.o)
1035      _png_text_compress in libwxpng-2.8.a(wxpng_pngwutil.o)
1036  "_XML_SetStartCdataSectionHandler", referenced from:
1037      wxXmlDocument::Load(wxInputStream&, wxString const&, int)in monodll_xml.o
1038  "_XML_GetErrorCode", referenced from:
1039      wxXmlDocument::Load(wxInputStream&, wxString const&, int)in monodll_xml.o
1040  "_deflateInit2_", referenced from:
1041      wxZlibOutputStream::Init(int, int)in monodll_zstream.o
1042      _png_write_IHDR in libwxpng-2.8.a(wxpng_pngwutil.o)
1043  "_XML_ParserFree", referenced from:
1044      wxXmlDocument::Load(wxInputStream&, wxString const&, int)in monodll_xml.o
1045  "_zlibVersion", referenced from:
1046      wxZlibInputStream::CanHandleGZip()       in monodll_zstream.o
1047      wxZlibInputStream::CanHandleGZip()       in monodll_zstream.o
1048  "_XML_SetUserData", referenced from:
1049      wxXmlDocument::Load(wxInputStream&, wxString const&, int)in monodll_xml.o
1050  "_inflate", referenced from:
1051      wxZlibInputStream::OnSysRead(void*, unsigned long)in monodll_zstream.o
1052      _png_read_row in libwxpng-2.8.a(wxpng_pngread.o)
1053      _png_read_finish_row in libwxpng-2.8.a(wxpng_pngrutil.o)
1054      _png_decompress_chunk in libwxpng-2.8.a(wxpng_pngrutil.o)
1055ld: symbol(s) not found
1056collect2: ld returned 1 exit status
1057make: *** [/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_wxWidgets/work/wxWidgets-2.8.9/build/lib/libwx_macu-2.8.0.5.0.dylib] Error 1
1058Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_wxWidgets/work/wxWidgets-2.8.9/build" && /usr/bin/make " returned error 2
1059Command output:   "_deflate", referenced from:
1060      wxZlibOutputStream::DoFlush(bool)  in monodll_zstream.o
1061      wxZlibOutputStream::OnSysWrite(void const*, unsigned long)in monodll_zstream.o
1062      _png_write_flush in libwxpng-2.8.a(wxpng_pngwrite.o)
1063      _png_write_finish_row in libwxpng-2.8.a(wxpng_pngwutil.o)
1064      _png_write_filtered_row in libwxpng-2.8.a(wxpng_pngwutil.o)
1065      _png_text_compress in libwxpng-2.8.a(wxpng_pngwutil.o)
1066      _png_text_compress in libwxpng-2.8.a(wxpng_pngwutil.o)
1067  "_XML_SetStartCdataSectionHandler", referenced from:
1068      wxXmlDocument::Load(wxInputStream&, wxString const&, int)in monodll_xml.o
1069  "_XML_GetErrorCode", referenced from:
1070      wxXmlDocument::Load(wxInputStream&, wxString const&, int)in monodll_xml.o
1071  "_deflateInit2_", referenced from:
1072      wxZlibOutputStream::Init(int, int)in monodll_zstream.o
1073      _png_write_IHDR in libwxpng-2.8.a(wxpng_pngwutil.o)
1074  "_XML_ParserFree", referenced from:
1075      wxXmlDocument::Load(wxInputStream&, wxString const&, int)in monodll_xml.o
1076  "_zlibVersion", referenced from:
1077      wxZlibInputStream::CanHandleGZip()       in monodll_zstream.o
1078      wxZlibInputStream::CanHandleGZip()       in monodll_zstream.o
1079  "_XML_SetUserData", referenced from:
1080      wxXmlDocument::Load(wxInputStream&, wxString const&, int)in monodll_xml.o
1081  "_inflate", referenced from:
1082      wxZlibInputStream::OnSysRead(void*, unsigned long)in monodll_zstream.o
1083      _png_read_row in libwxpng-2.8.a(wxpng_pngread.o)
1084      _png_read_finish_row in libwxpng-2.8.a(wxpng_pngrutil.o)
1085      _png_decompress_chunk in libwxpng-2.8.a(wxpng_pngrutil.o)
1086ld: symbol(s) not found
1087collect2: ld returned 1 exit status
1088make: *** [/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_wxWidgets/work/wxWidgets-2.8.9/build/lib/libwx_macu-2.8.0.5.0.dylib] Error 1
1089
1090DEBUG: Backtrace: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_wxWidgets/work/wxWidgets-2.8.9/build" && /usr/bin/make " returned error 2
1091Command output:   "_deflate", referenced from:
1092      wxZlibOutputStream::DoFlush(bool)  in monodll_zstream.o
1093      wxZlibOutputStream::OnSysWrite(void const*, unsigned long)in monodll_zstream.o
1094      _png_write_flush in libwxpng-2.8.a(wxpng_pngwrite.o)
1095      _png_write_finish_row in libwxpng-2.8.a(wxpng_pngwutil.o)
1096      _png_write_filtered_row in libwxpng-2.8.a(wxpng_pngwutil.o)
1097      _png_text_compress in libwxpng-2.8.a(wxpng_pngwutil.o)
1098      _png_text_compress in libwxpng-2.8.a(wxpng_pngwutil.o)
1099  "_XML_SetStartCdataSectionHandler", referenced from:
1100      wxXmlDocument::Load(wxInputStream&, wxString const&, int)in monodll_xml.o
1101  "_XML_GetErrorCode", referenced from:
1102      wxXmlDocument::Load(wxInputStream&, wxString const&, int)in monodll_xml.o
1103  "_deflateInit2_", referenced from:
1104      wxZlibOutputStream::Init(int, int)in monodll_zstream.o
1105      _png_write_IHDR in libwxpng-2.8.a(wxpng_pngwutil.o)
1106  "_XML_ParserFree", referenced from:
1107      wxXmlDocument::Load(wxInputStream&, wxString const&, int)in monodll_xml.o
1108  "_zlibVersion", referenced from:
1109      wxZlibInputStream::CanHandleGZip()       in monodll_zstream.o
1110      wxZlibInputStream::CanHandleGZip()       in monodll_zstream.o
1111  "_XML_SetUserData", referenced from:
1112      wxXmlDocument::Load(wxInputStream&, wxString const&, int)in monodll_xml.o
1113  "_inflate", referenced from:
1114      wxZlibInputStream::OnSysRead(void*, unsigned long)in monodll_zstream.o
1115      _png_read_row in libwxpng-2.8.a(wxpng_pngread.o)
1116      _png_read_finish_row in libwxpng-2.8.a(wxpng_pngrutil.o)
1117      _png_decompress_chunk in libwxpng-2.8.a(wxpng_pngrutil.o)
1118ld: symbol(s) not found
1119collect2: ld returned 1 exit status
1120make: *** [/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_wxWidgets/work/wxWidgets-2.8.9/build/lib/libwx_macu-2.8.0.5.0.dylib] Error 1
1121
1122    while executing
1123"command_exec build"
1124    (procedure "portbuild::build_main" line 9)
1125    invoked from within
1126"$procedure $targetname"
1127Warning: the following items did not execute (for wxWidgets): org.macports.activate org.macports.build org.macports.destroot org.macports.install
1128Error: Status 1 encountered during processing.
1129richard-powells-macbook-air:boost_1_41_0 rmpowell77$