| 1 | 590 ~$ sudo port -d install libzzip +universal |
|---|
| 2 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/libzzip |
|---|
| 3 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/libzzip |
|---|
| 4 | DEBUG: OS Platform: darwin |
|---|
| 5 | DEBUG: OS Version: 10.2.0 |
|---|
| 6 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 7 | DEBUG: System Arch: i386 |
|---|
| 8 | DEBUG: setting option os.universal_supported to yes |
|---|
| 9 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 10 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 11 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 12 | DEBUG: adding the default universal variant |
|---|
| 13 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 14 | DEBUG: Requested variant darwin is not provided by port libzzip. |
|---|
| 15 | DEBUG: Requested variant i386 is not provided by port libzzip. |
|---|
| 16 | DEBUG: Requested variant macosx is not provided by port libzzip. |
|---|
| 17 | DEBUG: Executing variant universal provides universal |
|---|
| 18 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib |
|---|
| 19 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 20 | DEBUG: zlib 1.2.3_4 exists in the ports tree |
|---|
| 21 | DEBUG: zlib 1.2.3_4 +universal is the latest installed |
|---|
| 22 | DEBUG: zlib 1.2.3_4 +universal is active |
|---|
| 23 | DEBUG: Merging existing variants universal into variants |
|---|
| 24 | DEBUG: new fully merged portvariants: universal + |
|---|
| 25 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib |
|---|
| 26 | DEBUG: OS Platform: darwin |
|---|
| 27 | DEBUG: OS Version: 10.2.0 |
|---|
| 28 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 29 | DEBUG: System Arch: i386 |
|---|
| 30 | DEBUG: setting option os.universal_supported to yes |
|---|
| 31 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 32 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 33 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 34 | DEBUG: adding the default universal variant |
|---|
| 35 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 36 | DEBUG: Requested variant darwin is not provided by port zlib. |
|---|
| 37 | DEBUG: Requested variant i386 is not provided by port zlib. |
|---|
| 38 | DEBUG: Requested variant macosx is not provided by port zlib. |
|---|
| 39 | DEBUG: Executing variant universal provides universal |
|---|
| 40 | DEBUG: No need to upgrade! zlib 1.2.3_4 >= zlib 1.2.3_4 |
|---|
| 41 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig |
|---|
| 42 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 43 | DEBUG: pkgconfig 0.23_1 exists in the ports tree |
|---|
| 44 | DEBUG: pkgconfig 0.23_1 +universal is the latest installed |
|---|
| 45 | DEBUG: pkgconfig 0.23_1 +universal is active |
|---|
| 46 | DEBUG: Merging existing variants universal into variants |
|---|
| 47 | DEBUG: new fully merged portvariants: universal + |
|---|
| 48 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig |
|---|
| 49 | DEBUG: OS Platform: darwin |
|---|
| 50 | DEBUG: OS Version: 10.2.0 |
|---|
| 51 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 52 | DEBUG: System Arch: i386 |
|---|
| 53 | DEBUG: setting option os.universal_supported to yes |
|---|
| 54 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 55 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 56 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 57 | DEBUG: adding the default universal variant |
|---|
| 58 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 59 | DEBUG: Requested variant darwin is not provided by port pkgconfig. |
|---|
| 60 | DEBUG: Requested variant i386 is not provided by port pkgconfig. |
|---|
| 61 | DEBUG: Requested variant macosx is not provided by port pkgconfig. |
|---|
| 62 | DEBUG: Executing variant universal provides universal |
|---|
| 63 | DEBUG: No need to upgrade! pkgconfig 0.23_1 >= pkgconfig 0.23_1 |
|---|
| 64 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/xmlto |
|---|
| 65 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 66 | DEBUG: xmlto 0.0.23_0 exists in the ports tree |
|---|
| 67 | DEBUG: xmlto 0.0.23_0 is the latest installed |
|---|
| 68 | DEBUG: xmlto 0.0.23_0 is active |
|---|
| 69 | DEBUG: Merging existing variants into variants |
|---|
| 70 | DEBUG: new fully merged portvariants: |
|---|
| 71 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/xmlto |
|---|
| 72 | DEBUG: OS Platform: darwin |
|---|
| 73 | DEBUG: OS Version: 10.2.0 |
|---|
| 74 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 75 | DEBUG: System Arch: i386 |
|---|
| 76 | DEBUG: setting option os.universal_supported to yes |
|---|
| 77 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 78 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 79 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 80 | DEBUG: adding the default universal variant |
|---|
| 81 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 82 | DEBUG: Requested variant darwin is not provided by port xmlto. |
|---|
| 83 | DEBUG: Requested variant i386 is not provided by port xmlto. |
|---|
| 84 | DEBUG: Requested variant macosx is not provided by port xmlto. |
|---|
| 85 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/coreutils |
|---|
| 86 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 87 | DEBUG: coreutils 8.4_0 exists in the ports tree |
|---|
| 88 | DEBUG: coreutils 8.4_0 is the latest installed |
|---|
| 89 | DEBUG: coreutils 8.4_0 is active |
|---|
| 90 | DEBUG: Merging existing variants into variants |
|---|
| 91 | DEBUG: new fully merged portvariants: |
|---|
| 92 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/coreutils |
|---|
| 93 | DEBUG: OS Platform: darwin |
|---|
| 94 | DEBUG: OS Version: 10.2.0 |
|---|
| 95 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 96 | DEBUG: System Arch: i386 |
|---|
| 97 | DEBUG: setting option os.universal_supported to yes |
|---|
| 98 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 99 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 100 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 101 | DEBUG: adding the default universal variant |
|---|
| 102 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 103 | DEBUG: Requested variant darwin is not provided by port coreutils. |
|---|
| 104 | DEBUG: Requested variant i386 is not provided by port coreutils. |
|---|
| 105 | DEBUG: Requested variant macosx is not provided by port coreutils. |
|---|
| 106 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext |
|---|
| 107 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 108 | DEBUG: gettext 0.17_4 exists in the ports tree |
|---|
| 109 | DEBUG: gettext 0.17_4 is the latest installed |
|---|
| 110 | DEBUG: gettext 0.17_4 is active |
|---|
| 111 | DEBUG: Merging existing variants into variants |
|---|
| 112 | DEBUG: new fully merged portvariants: |
|---|
| 113 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext |
|---|
| 114 | DEBUG: OS Platform: darwin |
|---|
| 115 | DEBUG: OS Version: 10.2.0 |
|---|
| 116 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 117 | DEBUG: System Arch: i386 |
|---|
| 118 | DEBUG: setting option os.universal_supported to yes |
|---|
| 119 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 120 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 121 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 122 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 123 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 124 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 125 | DEBUG: universal variant already exists, so not adding the default one |
|---|
| 126 | DEBUG: Requested variant darwin is not provided by port gettext. |
|---|
| 127 | DEBUG: Requested variant i386 is not provided by port gettext. |
|---|
| 128 | DEBUG: Requested variant macosx is not provided by port gettext. |
|---|
| 129 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv |
|---|
| 130 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 131 | DEBUG: libiconv 1.13.1_0 exists in the ports tree |
|---|
| 132 | DEBUG: libiconv 1.13.1_0 is the latest installed |
|---|
| 133 | DEBUG: libiconv 1.13.1_0 is active |
|---|
| 134 | DEBUG: Merging existing variants into variants |
|---|
| 135 | DEBUG: new fully merged portvariants: |
|---|
| 136 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv |
|---|
| 137 | DEBUG: OS Platform: darwin |
|---|
| 138 | DEBUG: OS Version: 10.2.0 |
|---|
| 139 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 140 | DEBUG: System Arch: i386 |
|---|
| 141 | DEBUG: setting option os.universal_supported to yes |
|---|
| 142 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 143 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 144 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 145 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 146 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 147 | DEBUG: universal variant already exists, so not adding the default one |
|---|
| 148 | DEBUG: Requested variant darwin is not provided by port libiconv. |
|---|
| 149 | DEBUG: Requested variant i386 is not provided by port libiconv. |
|---|
| 150 | DEBUG: Requested variant macosx is not provided by port libiconv. |
|---|
| 151 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf |
|---|
| 152 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 153 | DEBUG: gperf 3.0.4_0 exists in the ports tree |
|---|
| 154 | DEBUG: gperf 3.0.4_0 is the latest installed |
|---|
| 155 | DEBUG: gperf 3.0.4_0 is active |
|---|
| 156 | DEBUG: Merging existing variants into variants |
|---|
| 157 | DEBUG: new fully merged portvariants: |
|---|
| 158 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf |
|---|
| 159 | DEBUG: OS Platform: darwin |
|---|
| 160 | DEBUG: OS Version: 10.2.0 |
|---|
| 161 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 162 | DEBUG: System Arch: i386 |
|---|
| 163 | DEBUG: setting option os.universal_supported to yes |
|---|
| 164 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 165 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 166 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 167 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 168 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 169 | DEBUG: universal variant already exists, so not adding the default one |
|---|
| 170 | DEBUG: Requested variant darwin is not provided by port gperf. |
|---|
| 171 | DEBUG: Requested variant i386 is not provided by port gperf. |
|---|
| 172 | DEBUG: Requested variant macosx is not provided by port gperf. |
|---|
| 173 | DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0 |
|---|
| 174 | DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0 |
|---|
| 175 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses |
|---|
| 176 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 177 | DEBUG: ncurses 5.7_0 exists in the ports tree |
|---|
| 178 | DEBUG: ncurses 5.7_0 +darwin_10 is the latest installed |
|---|
| 179 | DEBUG: ncurses 5.7_0 +darwin_10 is active |
|---|
| 180 | DEBUG: Merging existing variants darwin_10 into variants |
|---|
| 181 | DEBUG: new fully merged portvariants: |
|---|
| 182 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses |
|---|
| 183 | DEBUG: OS Platform: darwin |
|---|
| 184 | DEBUG: OS Version: 10.2.0 |
|---|
| 185 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 186 | DEBUG: System Arch: i386 |
|---|
| 187 | DEBUG: setting option os.universal_supported to yes |
|---|
| 188 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 189 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 190 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 191 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 192 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 193 | DEBUG: universal variant already exists, so not adding the default one |
|---|
| 194 | DEBUG: Requested variant darwin is not provided by port ncurses. |
|---|
| 195 | DEBUG: Requested variant i386 is not provided by port ncurses. |
|---|
| 196 | DEBUG: Requested variant macosx is not provided by port ncurses. |
|---|
| 197 | DEBUG: Executing variant darwin_10 provides darwin_10 |
|---|
| 198 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw |
|---|
| 199 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 200 | DEBUG: ncursesw 5.7_0 exists in the ports tree |
|---|
| 201 | DEBUG: ncursesw 5.7_0 +darwin_10 is the latest installed |
|---|
| 202 | DEBUG: ncursesw 5.7_0 +darwin_10 is active |
|---|
| 203 | DEBUG: Merging existing variants darwin_10 into variants |
|---|
| 204 | DEBUG: new fully merged portvariants: |
|---|
| 205 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw |
|---|
| 206 | DEBUG: OS Platform: darwin |
|---|
| 207 | DEBUG: OS Version: 10.2.0 |
|---|
| 208 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 209 | DEBUG: System Arch: i386 |
|---|
| 210 | DEBUG: setting option os.universal_supported to yes |
|---|
| 211 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 212 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 213 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 214 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 215 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 216 | DEBUG: universal variant already exists, so not adding the default one |
|---|
| 217 | DEBUG: Requested variant darwin is not provided by port ncursesw. |
|---|
| 218 | DEBUG: Requested variant i386 is not provided by port ncursesw. |
|---|
| 219 | DEBUG: Requested variant macosx is not provided by port ncursesw. |
|---|
| 220 | DEBUG: Executing variant darwin_10 provides darwin_10 |
|---|
| 221 | DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0 |
|---|
| 222 | DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0 |
|---|
| 223 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat |
|---|
| 224 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 225 | DEBUG: expat 2.0.1_0 exists in the ports tree |
|---|
| 226 | DEBUG: expat 2.0.1_0 is the latest installed |
|---|
| 227 | DEBUG: expat 2.0.1_0 is active |
|---|
| 228 | DEBUG: Merging existing variants into variants |
|---|
| 229 | DEBUG: new fully merged portvariants: |
|---|
| 230 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat |
|---|
| 231 | DEBUG: OS Platform: darwin |
|---|
| 232 | DEBUG: OS Version: 10.2.0 |
|---|
| 233 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 234 | DEBUG: System Arch: i386 |
|---|
| 235 | DEBUG: setting option os.universal_supported to yes |
|---|
| 236 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 237 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 238 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 239 | DEBUG: adding the default universal variant |
|---|
| 240 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 241 | DEBUG: Requested variant darwin is not provided by port expat. |
|---|
| 242 | DEBUG: Requested variant i386 is not provided by port expat. |
|---|
| 243 | DEBUG: Requested variant macosx is not provided by port expat. |
|---|
| 244 | DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0 |
|---|
| 245 | DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4 |
|---|
| 246 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmp |
|---|
| 247 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 248 | DEBUG: gmp 4.3.2_0 exists in the ports tree |
|---|
| 249 | DEBUG: gmp 4.3.2_0 is the latest installed |
|---|
| 250 | DEBUG: gmp 4.3.2_0 is active |
|---|
| 251 | DEBUG: Merging existing variants into variants |
|---|
| 252 | DEBUG: new fully merged portvariants: |
|---|
| 253 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmp |
|---|
| 254 | DEBUG: OS Platform: darwin |
|---|
| 255 | DEBUG: OS Version: 10.2.0 |
|---|
| 256 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 257 | DEBUG: System Arch: i386 |
|---|
| 258 | DEBUG: setting option os.universal_supported to yes |
|---|
| 259 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 260 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 261 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 262 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 263 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 264 | DEBUG: universal variant already exists, so not adding the default one |
|---|
| 265 | DEBUG: Requested variant darwin is not provided by port gmp. |
|---|
| 266 | DEBUG: Requested variant i386 is not provided by port gmp. |
|---|
| 267 | DEBUG: Requested variant macosx is not provided by port gmp. |
|---|
| 268 | DEBUG: No need to upgrade! gmp 4.3.2_0 >= gmp 4.3.2_0 |
|---|
| 269 | DEBUG: No need to upgrade! coreutils 8.4_0 >= coreutils 8.4_0 |
|---|
| 270 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/findutils |
|---|
| 271 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 272 | DEBUG: findutils 4.4.2_0 exists in the ports tree |
|---|
| 273 | DEBUG: findutils 4.4.2_0 is the latest installed |
|---|
| 274 | DEBUG: findutils 4.4.2_0 is active |
|---|
| 275 | DEBUG: Merging existing variants into variants |
|---|
| 276 | DEBUG: new fully merged portvariants: |
|---|
| 277 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/findutils |
|---|
| 278 | DEBUG: OS Platform: darwin |
|---|
| 279 | DEBUG: OS Version: 10.2.0 |
|---|
| 280 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 281 | DEBUG: System Arch: i386 |
|---|
| 282 | DEBUG: setting option os.universal_supported to yes |
|---|
| 283 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 284 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 285 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 286 | DEBUG: adding the default universal variant |
|---|
| 287 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 288 | DEBUG: Requested variant darwin is not provided by port findutils. |
|---|
| 289 | DEBUG: Requested variant i386 is not provided by port findutils. |
|---|
| 290 | DEBUG: Requested variant macosx is not provided by port findutils. |
|---|
| 291 | DEBUG: No need to upgrade! findutils 4.4.2_0 >= findutils 4.4.2_0 |
|---|
| 292 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/getopt |
|---|
| 293 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 294 | DEBUG: getopt 1.1.4_1 exists in the ports tree |
|---|
| 295 | DEBUG: getopt 1.1.4_1 is the latest installed |
|---|
| 296 | DEBUG: getopt 1.1.4_1 is active |
|---|
| 297 | DEBUG: Merging existing variants into variants |
|---|
| 298 | DEBUG: new fully merged portvariants: |
|---|
| 299 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/getopt |
|---|
| 300 | DEBUG: OS Platform: darwin |
|---|
| 301 | DEBUG: OS Version: 10.2.0 |
|---|
| 302 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 303 | DEBUG: System Arch: i386 |
|---|
| 304 | DEBUG: setting option os.universal_supported to yes |
|---|
| 305 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 306 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 307 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 308 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 309 | DEBUG: universal variant already exists, so not adding the default one |
|---|
| 310 | DEBUG: Requested variant darwin is not provided by port getopt. |
|---|
| 311 | DEBUG: Requested variant i386 is not provided by port getopt. |
|---|
| 312 | DEBUG: Requested variant macosx is not provided by port getopt. |
|---|
| 313 | DEBUG: No need to upgrade! getopt 1.1.4_1 >= getopt 1.1.4_1 |
|---|
| 314 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/print/libpaper |
|---|
| 315 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 316 | DEBUG: libpaper 1.1.21_1 exists in the ports tree |
|---|
| 317 | DEBUG: libpaper 1.1.21_1 is the latest installed |
|---|
| 318 | DEBUG: libpaper 1.1.21_1 is active |
|---|
| 319 | DEBUG: Merging existing variants into variants |
|---|
| 320 | DEBUG: new fully merged portvariants: |
|---|
| 321 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/libpaper |
|---|
| 322 | DEBUG: OS Platform: darwin |
|---|
| 323 | DEBUG: OS Version: 10.2.0 |
|---|
| 324 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 325 | DEBUG: System Arch: i386 |
|---|
| 326 | DEBUG: setting option os.universal_supported to yes |
|---|
| 327 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 328 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 329 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 330 | DEBUG: adding the default universal variant |
|---|
| 331 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 332 | DEBUG: Requested variant darwin is not provided by port libpaper. |
|---|
| 333 | DEBUG: Requested variant i386 is not provided by port libpaper. |
|---|
| 334 | DEBUG: Requested variant macosx is not provided by port libpaper. |
|---|
| 335 | DEBUG: No need to upgrade! libpaper 1.1.21_1 >= libpaper 1.1.21_1 |
|---|
| 336 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/tex/texlive |
|---|
| 337 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 338 | DEBUG: texlive 2007_6 exists in the ports tree |
|---|
| 339 | DEBUG: texlive 2007_6 is the latest installed |
|---|
| 340 | DEBUG: texlive 2007_6 is active |
|---|
| 341 | DEBUG: Merging existing variants into variants |
|---|
| 342 | DEBUG: new fully merged portvariants: |
|---|
| 343 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/tex/texlive |
|---|
| 344 | DEBUG: OS Platform: darwin |
|---|
| 345 | DEBUG: OS Version: 10.2.0 |
|---|
| 346 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 347 | DEBUG: System Arch: i386 |
|---|
| 348 | DEBUG: setting option os.universal_supported to yes |
|---|
| 349 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 350 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 351 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 352 | DEBUG: not using configure, so not adding the default universal variant |
|---|
| 353 | DEBUG: Requested variant darwin is not provided by port texlive. |
|---|
| 354 | DEBUG: Requested variant i386 is not provided by port texlive. |
|---|
| 355 | DEBUG: Requested variant macosx is not provided by port texlive. |
|---|
| 356 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/tex/texlive_base |
|---|
| 357 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 358 | DEBUG: texlive_base 2007_7 exists in the ports tree |
|---|
| 359 | DEBUG: texlive_base 2007_7 +motif is the latest installed |
|---|
| 360 | DEBUG: texlive_base 2007_7 +motif is active |
|---|
| 361 | DEBUG: Merging existing variants motif into variants |
|---|
| 362 | DEBUG: new fully merged portvariants: motif + |
|---|
| 363 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/tex/texlive_base |
|---|
| 364 | DEBUG: OS Platform: darwin |
|---|
| 365 | DEBUG: OS Version: 10.2.0 |
|---|
| 366 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 367 | DEBUG: System Arch: i386 |
|---|
| 368 | DEBUG: setting option os.universal_supported to yes |
|---|
| 369 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 370 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 371 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 372 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 373 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
|---|
| 374 | DEBUG: Requested variant darwin is not provided by port texlive_base. |
|---|
| 375 | DEBUG: Requested variant i386 is not provided by port texlive_base. |
|---|
| 376 | DEBUG: Requested variant macosx is not provided by port texlive_base. |
|---|
| 377 | DEBUG: Executing variant motif provides motif |
|---|
| 378 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 |
|---|
| 379 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 380 | DEBUG: perl5 5.8.9_0 exists in the ports tree |
|---|
| 381 | DEBUG: perl5 5.8.9_0 is the latest installed |
|---|
| 382 | DEBUG: perl5 5.8.9_0 is active |
|---|
| 383 | DEBUG: Merging existing variants into variants |
|---|
| 384 | DEBUG: new fully merged portvariants: |
|---|
| 385 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 |
|---|
| 386 | DEBUG: OS Platform: darwin |
|---|
| 387 | DEBUG: OS Version: 10.2.0 |
|---|
| 388 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 389 | DEBUG: System Arch: i386 |
|---|
| 390 | DEBUG: setting option os.universal_supported to yes |
|---|
| 391 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 392 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 393 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 394 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
|---|
| 395 | DEBUG: Requested variant darwin is not provided by port perl5. |
|---|
| 396 | DEBUG: Requested variant i386 is not provided by port perl5. |
|---|
| 397 | DEBUG: Requested variant macosx is not provided by port perl5. |
|---|
| 398 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8 |
|---|
| 399 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 400 | DEBUG: perl5.8 5.8.9_3 exists in the ports tree |
|---|
| 401 | DEBUG: perl5.8 5.8.9_3 is the latest installed |
|---|
| 402 | DEBUG: perl5.8 5.8.9_3 is active |
|---|
| 403 | DEBUG: Merging existing variants into variants |
|---|
| 404 | DEBUG: new fully merged portvariants: |
|---|
| 405 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8 |
|---|
| 406 | DEBUG: OS Platform: darwin |
|---|
| 407 | DEBUG: OS Version: 10.2.0 |
|---|
| 408 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 409 | DEBUG: System Arch: i386 |
|---|
| 410 | DEBUG: setting option os.universal_supported to yes |
|---|
| 411 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 412 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 413 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 414 | DEBUG: adding the default universal variant |
|---|
| 415 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 416 | DEBUG: Requested variant darwin is not provided by port perl5.8. |
|---|
| 417 | DEBUG: Requested variant i386 is not provided by port perl5.8. |
|---|
| 418 | DEBUG: Requested variant macosx is not provided by port perl5.8. |
|---|
| 419 | DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3 |
|---|
| 420 | DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0 |
|---|
| 421 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype |
|---|
| 422 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 423 | DEBUG: freetype 2.3.11_1 exists in the ports tree |
|---|
| 424 | DEBUG: freetype 2.3.11_1 +macosx is the latest installed |
|---|
| 425 | DEBUG: freetype 2.3.11_1 +macosx is active |
|---|
| 426 | DEBUG: Merging existing variants macosx into variants |
|---|
| 427 | DEBUG: new fully merged portvariants: |
|---|
| 428 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype |
|---|
| 429 | DEBUG: OS Platform: darwin |
|---|
| 430 | DEBUG: OS Version: 10.2.0 |
|---|
| 431 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 432 | DEBUG: System Arch: i386 |
|---|
| 433 | DEBUG: setting option os.universal_supported to yes |
|---|
| 434 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 435 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 436 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 437 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 438 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 439 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 440 | DEBUG: universal variant already exists, so not adding the default one |
|---|
| 441 | DEBUG: Requested variant darwin is not provided by port freetype. |
|---|
| 442 | DEBUG: Requested variant i386 is not provided by port freetype. |
|---|
| 443 | DEBUG: Executing variant macosx provides macosx |
|---|
| 444 | DEBUG: No need to upgrade! freetype 2.3.11_1 >= freetype 2.3.11_1 |
|---|
| 445 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig |
|---|
| 446 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 447 | DEBUG: fontconfig 2.8.0_0 exists in the ports tree |
|---|
| 448 | DEBUG: fontconfig 2.8.0_0 +macosx is the latest installed |
|---|
| 449 | DEBUG: fontconfig 2.8.0_0 +macosx is active |
|---|
| 450 | DEBUG: Merging existing variants macosx into variants |
|---|
| 451 | DEBUG: new fully merged portvariants: |
|---|
| 452 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig |
|---|
| 453 | DEBUG: OS Platform: darwin |
|---|
| 454 | DEBUG: OS Version: 10.2.0 |
|---|
| 455 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 456 | DEBUG: System Arch: i386 |
|---|
| 457 | DEBUG: setting option os.universal_supported to yes |
|---|
| 458 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 459 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 460 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 461 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 462 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 463 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 464 | DEBUG: universal variant already exists, so not adding the default one |
|---|
| 465 | DEBUG: Requested variant darwin is not provided by port fontconfig. |
|---|
| 466 | DEBUG: Requested variant i386 is not provided by port fontconfig. |
|---|
| 467 | DEBUG: Executing variant macosx provides macosx |
|---|
| 468 | DEBUG: No need to upgrade! fontconfig 2.8.0_0 >= fontconfig 2.8.0_0 |
|---|
| 469 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng |
|---|
| 470 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 471 | DEBUG: libpng 1.2.42_0 exists in the ports tree |
|---|
| 472 | DEBUG: libpng 1.2.42_0 is the latest installed |
|---|
| 473 | DEBUG: libpng 1.2.42_0 is active |
|---|
| 474 | DEBUG: Merging existing variants into variants |
|---|
| 475 | DEBUG: new fully merged portvariants: |
|---|
| 476 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng |
|---|
| 477 | DEBUG: OS Platform: darwin |
|---|
| 478 | DEBUG: OS Version: 10.2.0 |
|---|
| 479 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 480 | DEBUG: System Arch: i386 |
|---|
| 481 | DEBUG: setting option os.universal_supported to yes |
|---|
| 482 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 483 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 484 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 485 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 486 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 487 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 488 | DEBUG: universal variant already exists, so not adding the default one |
|---|
| 489 | DEBUG: Requested variant darwin is not provided by port libpng. |
|---|
| 490 | DEBUG: Requested variant i386 is not provided by port libpng. |
|---|
| 491 | DEBUG: Requested variant macosx is not provided by port libpng. |
|---|
| 492 | DEBUG: No need to upgrade! libpng 1.2.42_0 >= libpng 1.2.42_0 |
|---|
| 493 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/texinfo |
|---|
| 494 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 495 | DEBUG: texinfo 4.13_0 exists in the ports tree |
|---|
| 496 | DEBUG: texinfo 4.13_0 is the latest installed |
|---|
| 497 | DEBUG: texinfo 4.13_0 is active |
|---|
| 498 | DEBUG: Merging existing variants into variants |
|---|
| 499 | DEBUG: new fully merged portvariants: |
|---|
| 500 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/texinfo |
|---|
| 501 | DEBUG: OS Platform: darwin |
|---|
| 502 | DEBUG: OS Version: 10.2.0 |
|---|
| 503 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 504 | DEBUG: System Arch: i386 |
|---|
| 505 | DEBUG: setting option os.universal_supported to yes |
|---|
| 506 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 507 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 508 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 509 | DEBUG: adding the default universal variant |
|---|
| 510 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 511 | DEBUG: Requested variant darwin is not provided by port texinfo. |
|---|
| 512 | DEBUG: Requested variant i386 is not provided by port texinfo. |
|---|
| 513 | DEBUG: Requested variant macosx is not provided by port texinfo. |
|---|
| 514 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/lzmautils |
|---|
| 515 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 516 | DEBUG: lzmautils 4.32.7_1 exists in the ports tree |
|---|
| 517 | DEBUG: lzmautils 4.32.7_1 is the latest installed |
|---|
| 518 | DEBUG: lzmautils 4.32.7_1 is active |
|---|
| 519 | DEBUG: Merging existing variants into variants |
|---|
| 520 | DEBUG: new fully merged portvariants: |
|---|
| 521 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/lzmautils |
|---|
| 522 | DEBUG: OS Platform: darwin |
|---|
| 523 | DEBUG: OS Version: 10.2.0 |
|---|
| 524 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 525 | DEBUG: System Arch: i386 |
|---|
| 526 | DEBUG: setting option os.universal_supported to yes |
|---|
| 527 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 528 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 529 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 530 | DEBUG: adding the default universal variant |
|---|
| 531 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 532 | DEBUG: Requested variant darwin is not provided by port lzmautils. |
|---|
| 533 | DEBUG: Requested variant i386 is not provided by port lzmautils. |
|---|
| 534 | DEBUG: Requested variant macosx is not provided by port lzmautils. |
|---|
| 535 | DEBUG: No need to upgrade! lzmautils 4.32.7_1 >= lzmautils 4.32.7_1 |
|---|
| 536 | DEBUG: No need to upgrade! texinfo 4.13_0 >= texinfo 4.13_0 |
|---|
| 537 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/texi2html |
|---|
| 538 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 539 | DEBUG: texi2html 1.82_0 exists in the ports tree |
|---|
| 540 | DEBUG: texi2html 1.82_0 is the latest installed |
|---|
| 541 | DEBUG: texi2html 1.82_0 is active |
|---|
| 542 | DEBUG: Merging existing variants into variants |
|---|
| 543 | DEBUG: new fully merged portvariants: |
|---|
| 544 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/texi2html |
|---|
| 545 | DEBUG: OS Platform: darwin |
|---|
| 546 | DEBUG: OS Version: 10.2.0 |
|---|
| 547 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 548 | DEBUG: System Arch: i386 |
|---|
| 549 | DEBUG: setting option os.universal_supported to yes |
|---|
| 550 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 551 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 552 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 553 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
|---|
| 554 | DEBUG: Requested variant darwin is not provided by port texi2html. |
|---|
| 555 | DEBUG: Requested variant i386 is not provided by port texi2html. |
|---|
| 556 | DEBUG: Requested variant macosx is not provided by port texi2html. |
|---|
| 557 | DEBUG: No need to upgrade! texi2html 1.82_0 >= texi2html 1.82_0 |
|---|
| 558 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/print/ghostscript |
|---|
| 559 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 560 | DEBUG: ghostscript 8.70_1 exists in the ports tree |
|---|
| 561 | DEBUG: ghostscript 8.70_1 is the latest installed |
|---|
| 562 | DEBUG: ghostscript 8.70_1 is active |
|---|
| 563 | DEBUG: Merging existing variants into variants |
|---|
| 564 | DEBUG: new fully merged portvariants: |
|---|
| 565 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/ghostscript |
|---|
| 566 | DEBUG: OS Platform: darwin |
|---|
| 567 | DEBUG: OS Version: 10.2.0 |
|---|
| 568 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 569 | DEBUG: System Arch: i386 |
|---|
| 570 | DEBUG: setting option os.universal_supported to yes |
|---|
| 571 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 572 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 573 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 574 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 575 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
|---|
| 576 | DEBUG: Requested variant darwin is not provided by port ghostscript. |
|---|
| 577 | DEBUG: Requested variant i386 is not provided by port ghostscript. |
|---|
| 578 | DEBUG: Requested variant macosx is not provided by port ghostscript. |
|---|
| 579 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf |
|---|
| 580 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 581 | DEBUG: autoconf 2.65_1 exists in the ports tree |
|---|
| 582 | DEBUG: autoconf 2.65_1 is the latest installed |
|---|
| 583 | DEBUG: autoconf 2.65_1 is active |
|---|
| 584 | DEBUG: Merging existing variants into variants |
|---|
| 585 | DEBUG: new fully merged portvariants: |
|---|
| 586 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf |
|---|
| 587 | DEBUG: OS Platform: darwin |
|---|
| 588 | DEBUG: OS Version: 10.2.0 |
|---|
| 589 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 590 | DEBUG: System Arch: i386 |
|---|
| 591 | DEBUG: setting option os.universal_supported to yes |
|---|
| 592 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 593 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 594 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 595 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
|---|
| 596 | DEBUG: Requested variant darwin is not provided by port autoconf. |
|---|
| 597 | DEBUG: Requested variant i386 is not provided by port autoconf. |
|---|
| 598 | DEBUG: Requested variant macosx is not provided by port autoconf. |
|---|
| 599 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4 |
|---|
| 600 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 601 | DEBUG: m4 1.4.13_0 exists in the ports tree |
|---|
| 602 | DEBUG: m4 1.4.13_0 is the latest installed |
|---|
| 603 | DEBUG: m4 1.4.13_0 is active |
|---|
| 604 | DEBUG: Merging existing variants into variants |
|---|
| 605 | DEBUG: new fully merged portvariants: |
|---|
| 606 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4 |
|---|
| 607 | DEBUG: OS Platform: darwin |
|---|
| 608 | DEBUG: OS Version: 10.2.0 |
|---|
| 609 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 610 | DEBUG: System Arch: i386 |
|---|
| 611 | DEBUG: setting option os.universal_supported to yes |
|---|
| 612 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 613 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 614 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 615 | DEBUG: adding the default universal variant |
|---|
| 616 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 617 | DEBUG: Requested variant darwin is not provided by port m4. |
|---|
| 618 | DEBUG: Requested variant i386 is not provided by port m4. |
|---|
| 619 | DEBUG: Requested variant macosx is not provided by port m4. |
|---|
| 620 | DEBUG: No need to upgrade! m4 1.4.13_0 >= m4 1.4.13_0 |
|---|
| 621 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man |
|---|
| 622 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 623 | DEBUG: help2man 1.37.1_1 exists in the ports tree |
|---|
| 624 | DEBUG: help2man 1.37.1_1 is the latest installed |
|---|
| 625 | DEBUG: help2man 1.37.1_1 is active |
|---|
| 626 | DEBUG: Merging existing variants into variants |
|---|
| 627 | DEBUG: new fully merged portvariants: |
|---|
| 628 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man |
|---|
| 629 | DEBUG: OS Platform: darwin |
|---|
| 630 | DEBUG: OS Version: 10.2.0 |
|---|
| 631 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 632 | DEBUG: System Arch: i386 |
|---|
| 633 | DEBUG: setting option os.universal_supported to yes |
|---|
| 634 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 635 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 636 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 637 | DEBUG: adding the default universal variant |
|---|
| 638 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 639 | DEBUG: Requested variant darwin is not provided by port help2man. |
|---|
| 640 | DEBUG: Requested variant i386 is not provided by port help2man. |
|---|
| 641 | DEBUG: Requested variant macosx is not provided by port help2man. |
|---|
| 642 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext |
|---|
| 643 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 644 | DEBUG: p5-locale-gettext 1.05_2 exists in the ports tree |
|---|
| 645 | DEBUG: p5-locale-gettext 1.05_2 is the latest installed |
|---|
| 646 | DEBUG: p5-locale-gettext 1.05_2 is active |
|---|
| 647 | DEBUG: Merging existing variants into variants |
|---|
| 648 | DEBUG: new fully merged portvariants: |
|---|
| 649 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext |
|---|
| 650 | DEBUG: OS Platform: darwin |
|---|
| 651 | DEBUG: OS Version: 10.2.0 |
|---|
| 652 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 653 | DEBUG: System Arch: i386 |
|---|
| 654 | DEBUG: setting option os.universal_supported to yes |
|---|
| 655 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 656 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 657 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 658 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl |
|---|
| 659 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
|---|
| 660 | DEBUG: Requested variant darwin is not provided by port p5-locale-gettext. |
|---|
| 661 | DEBUG: Requested variant i386 is not provided by port p5-locale-gettext. |
|---|
| 662 | DEBUG: Requested variant macosx is not provided by port p5-locale-gettext. |
|---|
| 663 | DEBUG: No need to upgrade! p5-locale-gettext 1.05_2 >= p5-locale-gettext 1.05_2 |
|---|
| 664 | DEBUG: No need to upgrade! help2man 1.37.1_1 >= help2man 1.37.1_1 |
|---|
| 665 | DEBUG: No need to upgrade! autoconf 2.65_1 >= autoconf 2.65_1 |
|---|
| 666 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake |
|---|
| 667 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 668 | DEBUG: automake 1.11.1_0 exists in the ports tree |
|---|
| 669 | DEBUG: automake 1.11.1_0 is the latest installed |
|---|
| 670 | DEBUG: automake 1.11.1_0 is active |
|---|
| 671 | DEBUG: Merging existing variants into variants |
|---|
| 672 | DEBUG: new fully merged portvariants: |
|---|
| 673 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake |
|---|
| 674 | DEBUG: OS Platform: darwin |
|---|
| 675 | DEBUG: OS Version: 10.2.0 |
|---|
| 676 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 677 | DEBUG: System Arch: i386 |
|---|
| 678 | DEBUG: setting option os.universal_supported to yes |
|---|
| 679 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 680 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 681 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 682 | DEBUG: adding the default universal variant |
|---|
| 683 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 684 | DEBUG: Requested variant darwin is not provided by port automake. |
|---|
| 685 | DEBUG: Requested variant i386 is not provided by port automake. |
|---|
| 686 | DEBUG: Requested variant macosx is not provided by port automake. |
|---|
| 687 | DEBUG: No need to upgrade! automake 1.11.1_0 >= automake 1.11.1_0 |
|---|
| 688 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool |
|---|
| 689 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 690 | DEBUG: libtool 2.2.6b_0 exists in the ports tree |
|---|
| 691 | DEBUG: libtool 2.2.6b_0 is the latest installed |
|---|
| 692 | DEBUG: libtool 2.2.6b_0 is active |
|---|
| 693 | DEBUG: Merging existing variants into variants |
|---|
| 694 | DEBUG: new fully merged portvariants: |
|---|
| 695 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool |
|---|
| 696 | DEBUG: OS Platform: darwin |
|---|
| 697 | DEBUG: OS Version: 10.2.0 |
|---|
| 698 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 699 | DEBUG: System Arch: i386 |
|---|
| 700 | DEBUG: setting option os.universal_supported to yes |
|---|
| 701 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 702 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 703 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 704 | DEBUG: adding the default universal variant |
|---|
| 705 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 706 | DEBUG: Requested variant darwin is not provided by port libtool. |
|---|
| 707 | DEBUG: Requested variant i386 is not provided by port libtool. |
|---|
| 708 | DEBUG: Requested variant macosx is not provided by port libtool. |
|---|
| 709 | DEBUG: No need to upgrade! libtool 2.2.6b_0 >= libtool 2.2.6b_0 |
|---|
| 710 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXext |
|---|
| 711 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 712 | DEBUG: xorg-libXext 1.1.1_0 exists in the ports tree |
|---|
| 713 | DEBUG: xorg-libXext 1.1.1_0 is the latest installed |
|---|
| 714 | DEBUG: xorg-libXext 1.1.1_0 is active |
|---|
| 715 | DEBUG: Merging existing variants into variants |
|---|
| 716 | DEBUG: new fully merged portvariants: |
|---|
| 717 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXext |
|---|
| 718 | DEBUG: OS Platform: darwin |
|---|
| 719 | DEBUG: OS Version: 10.2.0 |
|---|
| 720 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 721 | DEBUG: System Arch: i386 |
|---|
| 722 | DEBUG: setting option os.universal_supported to yes |
|---|
| 723 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 724 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 725 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 726 | DEBUG: adding the default universal variant |
|---|
| 727 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 728 | DEBUG: Requested variant darwin is not provided by port xorg-libXext. |
|---|
| 729 | DEBUG: Requested variant i386 is not provided by port xorg-libXext. |
|---|
| 730 | DEBUG: Requested variant macosx is not provided by port xorg-libXext. |
|---|
| 731 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11 |
|---|
| 732 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 733 | DEBUG: xorg-libX11 1.3.3_0 exists in the ports tree |
|---|
| 734 | DEBUG: xorg-libX11 1.3.3_0 is the latest installed |
|---|
| 735 | DEBUG: xorg-libX11 1.3.3_0 is active |
|---|
| 736 | DEBUG: Merging existing variants into variants |
|---|
| 737 | DEBUG: new fully merged portvariants: |
|---|
| 738 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11 |
|---|
| 739 | DEBUG: OS Platform: darwin |
|---|
| 740 | DEBUG: OS Version: 10.2.0 |
|---|
| 741 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 742 | DEBUG: System Arch: i386 |
|---|
| 743 | DEBUG: setting option os.universal_supported to yes |
|---|
| 744 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 745 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 746 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 747 | DEBUG: adding the default universal variant |
|---|
| 748 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 749 | DEBUG: Requested variant darwin is not provided by port xorg-libX11. |
|---|
| 750 | DEBUG: Requested variant i386 is not provided by port xorg-libX11. |
|---|
| 751 | DEBUG: Requested variant macosx is not provided by port xorg-libX11. |
|---|
| 752 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-util-macros |
|---|
| 753 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 754 | DEBUG: xorg-util-macros 1.5.0_0 exists in the ports tree |
|---|
| 755 | DEBUG: xorg-util-macros 1.5.0_0 is the latest installed |
|---|
| 756 | DEBUG: xorg-util-macros 1.5.0_0 is active |
|---|
| 757 | DEBUG: Merging existing variants into variants |
|---|
| 758 | DEBUG: new fully merged portvariants: |
|---|
| 759 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-util-macros |
|---|
| 760 | DEBUG: OS Platform: darwin |
|---|
| 761 | DEBUG: OS Version: 10.2.0 |
|---|
| 762 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 763 | DEBUG: System Arch: i386 |
|---|
| 764 | DEBUG: setting option os.universal_supported to yes |
|---|
| 765 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 766 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 767 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 768 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
|---|
| 769 | DEBUG: Requested variant darwin is not provided by port xorg-util-macros. |
|---|
| 770 | DEBUG: Requested variant i386 is not provided by port xorg-util-macros. |
|---|
| 771 | DEBUG: Requested variant macosx is not provided by port xorg-util-macros. |
|---|
| 772 | DEBUG: No need to upgrade! xorg-util-macros 1.5.0_0 >= xorg-util-macros 1.5.0_0 |
|---|
| 773 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xtrans |
|---|
| 774 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 775 | DEBUG: xorg-xtrans 1.2.5_0 exists in the ports tree |
|---|
| 776 | DEBUG: xorg-xtrans 1.2.5_0 is the latest installed |
|---|
| 777 | DEBUG: xorg-xtrans 1.2.5_0 is active |
|---|
| 778 | DEBUG: Merging existing variants into variants |
|---|
| 779 | DEBUG: new fully merged portvariants: |
|---|
| 780 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xtrans |
|---|
| 781 | DEBUG: OS Platform: darwin |
|---|
| 782 | DEBUG: OS Version: 10.2.0 |
|---|
| 783 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 784 | DEBUG: System Arch: i386 |
|---|
| 785 | DEBUG: setting option os.universal_supported to yes |
|---|
| 786 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 787 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 788 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 789 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
|---|
| 790 | DEBUG: Requested variant darwin is not provided by port xorg-xtrans. |
|---|
| 791 | DEBUG: Requested variant i386 is not provided by port xorg-xtrans. |
|---|
| 792 | DEBUG: Requested variant macosx is not provided by port xorg-xtrans. |
|---|
| 793 | DEBUG: No need to upgrade! xorg-xtrans 1.2.5_0 >= xorg-xtrans 1.2.5_0 |
|---|
| 794 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-bigreqsproto |
|---|
| 795 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 796 | DEBUG: xorg-bigreqsproto 1.1.0_0 exists in the ports tree |
|---|
| 797 | DEBUG: xorg-bigreqsproto 1.1.0_0 is the latest installed |
|---|
| 798 | DEBUG: xorg-bigreqsproto 1.1.0_0 is active |
|---|
| 799 | DEBUG: Merging existing variants into variants |
|---|
| 800 | DEBUG: new fully merged portvariants: |
|---|
| 801 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-bigreqsproto |
|---|
| 802 | DEBUG: OS Platform: darwin |
|---|
| 803 | DEBUG: OS Version: 10.2.0 |
|---|
| 804 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 805 | DEBUG: System Arch: i386 |
|---|
| 806 | DEBUG: setting option os.universal_supported to yes |
|---|
| 807 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 808 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 809 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 810 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
|---|
| 811 | DEBUG: Requested variant darwin is not provided by port xorg-bigreqsproto. |
|---|
| 812 | DEBUG: Requested variant i386 is not provided by port xorg-bigreqsproto. |
|---|
| 813 | DEBUG: Requested variant macosx is not provided by port xorg-bigreqsproto. |
|---|
| 814 | DEBUG: No need to upgrade! xorg-bigreqsproto 1.1.0_0 >= xorg-bigreqsproto 1.1.0_0 |
|---|
| 815 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcmiscproto |
|---|
| 816 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 817 | DEBUG: xorg-xcmiscproto 1.2.0_0 exists in the ports tree |
|---|
| 818 | DEBUG: xorg-xcmiscproto 1.2.0_0 is the latest installed |
|---|
| 819 | DEBUG: xorg-xcmiscproto 1.2.0_0 is active |
|---|
| 820 | DEBUG: Merging existing variants into variants |
|---|
| 821 | DEBUG: new fully merged portvariants: |
|---|
| 822 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcmiscproto |
|---|
| 823 | DEBUG: OS Platform: darwin |
|---|
| 824 | DEBUG: OS Version: 10.2.0 |
|---|
| 825 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 826 | DEBUG: System Arch: i386 |
|---|
| 827 | DEBUG: setting option os.universal_supported to yes |
|---|
| 828 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 829 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 830 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 831 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
|---|
| 832 | DEBUG: Requested variant darwin is not provided by port xorg-xcmiscproto. |
|---|
| 833 | DEBUG: Requested variant i386 is not provided by port xorg-xcmiscproto. |
|---|
| 834 | DEBUG: Requested variant macosx is not provided by port xorg-xcmiscproto. |
|---|
| 835 | DEBUG: No need to upgrade! xorg-xcmiscproto 1.2.0_0 >= xorg-xcmiscproto 1.2.0_0 |
|---|
| 836 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto |
|---|
| 837 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 838 | DEBUG: xorg-xextproto 7.1.1_0 exists in the ports tree |
|---|
| 839 | DEBUG: xorg-xextproto 7.1.1_0 is the latest installed |
|---|
| 840 | DEBUG: xorg-xextproto 7.1.1_0 is active |
|---|
| 841 | DEBUG: Merging existing variants into variants |
|---|
| 842 | DEBUG: new fully merged portvariants: |
|---|
| 843 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto |
|---|
| 844 | DEBUG: OS Platform: darwin |
|---|
| 845 | DEBUG: OS Version: 10.2.0 |
|---|
| 846 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 847 | DEBUG: System Arch: i386 |
|---|
| 848 | DEBUG: setting option os.universal_supported to yes |
|---|
| 849 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 850 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 851 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 852 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
|---|
| 853 | DEBUG: Requested variant darwin is not provided by port xorg-xextproto. |
|---|
| 854 | DEBUG: Requested variant i386 is not provided by port xorg-xextproto. |
|---|
| 855 | DEBUG: Requested variant macosx is not provided by port xorg-xextproto. |
|---|
| 856 | DEBUG: No need to upgrade! xorg-xextproto 7.1.1_0 >= xorg-xextproto 7.1.1_0 |
|---|
| 857 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xf86bigfontproto |
|---|
| 858 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 859 | DEBUG: xorg-xf86bigfontproto 1.2.0_0 exists in the ports tree |
|---|
| 860 | DEBUG: xorg-xf86bigfontproto 1.2.0_0 is the latest installed |
|---|
| 861 | DEBUG: xorg-xf86bigfontproto 1.2.0_0 is active |
|---|
| 862 | DEBUG: Merging existing variants into variants |
|---|
| 863 | DEBUG: new fully merged portvariants: |
|---|
| 864 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xf86bigfontproto |
|---|
| 865 | DEBUG: OS Platform: darwin |
|---|
| 866 | DEBUG: OS Version: 10.2.0 |
|---|
| 867 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 868 | DEBUG: System Arch: i386 |
|---|
| 869 | DEBUG: setting option os.universal_supported to yes |
|---|
| 870 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 871 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 872 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 873 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
|---|
| 874 | DEBUG: Requested variant darwin is not provided by port xorg-xf86bigfontproto. |
|---|
| 875 | DEBUG: Requested variant i386 is not provided by port xorg-xf86bigfontproto. |
|---|
| 876 | DEBUG: Requested variant macosx is not provided by port xorg-xf86bigfontproto. |
|---|
| 877 | DEBUG: No need to upgrade! xorg-xf86bigfontproto 1.2.0_0 >= xorg-xf86bigfontproto 1.2.0_0 |
|---|
| 878 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-inputproto |
|---|
| 879 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 880 | DEBUG: xorg-inputproto 2.0_0 exists in the ports tree |
|---|
| 881 | DEBUG: xorg-inputproto 2.0_0 is the latest installed |
|---|
| 882 | DEBUG: xorg-inputproto 2.0_0 is active |
|---|
| 883 | DEBUG: Merging existing variants into variants |
|---|
| 884 | DEBUG: new fully merged portvariants: |
|---|
| 885 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-inputproto |
|---|
| 886 | DEBUG: OS Platform: darwin |
|---|
| 887 | DEBUG: OS Version: 10.2.0 |
|---|
| 888 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 889 | DEBUG: System Arch: i386 |
|---|
| 890 | DEBUG: setting option os.universal_supported to yes |
|---|
| 891 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 892 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 893 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 894 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
|---|
| 895 | DEBUG: Requested variant darwin is not provided by port xorg-inputproto. |
|---|
| 896 | DEBUG: Requested variant i386 is not provided by port xorg-inputproto. |
|---|
| 897 | DEBUG: Requested variant macosx is not provided by port xorg-inputproto. |
|---|
| 898 | DEBUG: No need to upgrade! xorg-inputproto 2.0_0 >= xorg-inputproto 2.0_0 |
|---|
| 899 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp |
|---|
| 900 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 901 | DEBUG: xorg-libXdmcp 1.0.3_0 exists in the ports tree |
|---|
| 902 | DEBUG: xorg-libXdmcp 1.0.3_0 is the latest installed |
|---|
| 903 | DEBUG: xorg-libXdmcp 1.0.3_0 is active |
|---|
| 904 | DEBUG: Merging existing variants into variants |
|---|
| 905 | DEBUG: new fully merged portvariants: |
|---|
| 906 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp |
|---|
| 907 | DEBUG: OS Platform: darwin |
|---|
| 908 | DEBUG: OS Version: 10.2.0 |
|---|
| 909 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 910 | DEBUG: System Arch: i386 |
|---|
| 911 | DEBUG: setting option os.universal_supported to yes |
|---|
| 912 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 913 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 914 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 915 | DEBUG: adding the default universal variant |
|---|
| 916 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 917 | DEBUG: Requested variant darwin is not provided by port xorg-libXdmcp. |
|---|
| 918 | DEBUG: Requested variant i386 is not provided by port xorg-libXdmcp. |
|---|
| 919 | DEBUG: Requested variant macosx is not provided by port xorg-libXdmcp. |
|---|
| 920 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto |
|---|
| 921 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 922 | DEBUG: xorg-xproto 7.0.16_0 exists in the ports tree |
|---|
| 923 | DEBUG: xorg-xproto 7.0.16_0 is the latest installed |
|---|
| 924 | DEBUG: xorg-xproto 7.0.16_0 is active |
|---|
| 925 | DEBUG: Merging existing variants into variants |
|---|
| 926 | DEBUG: new fully merged portvariants: |
|---|
| 927 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto |
|---|
| 928 | DEBUG: OS Platform: darwin |
|---|
| 929 | DEBUG: OS Version: 10.2.0 |
|---|
| 930 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 931 | DEBUG: System Arch: i386 |
|---|
| 932 | DEBUG: setting option os.universal_supported to yes |
|---|
| 933 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 934 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 935 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 936 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
|---|
| 937 | DEBUG: Requested variant darwin is not provided by port xorg-xproto. |
|---|
| 938 | DEBUG: Requested variant i386 is not provided by port xorg-xproto. |
|---|
| 939 | DEBUG: Requested variant macosx is not provided by port xorg-xproto. |
|---|
| 940 | DEBUG: No need to upgrade! xorg-xproto 7.0.16_0 >= xorg-xproto 7.0.16_0 |
|---|
| 941 | DEBUG: No need to upgrade! xorg-libXdmcp 1.0.3_0 >= xorg-libXdmcp 1.0.3_0 |
|---|
| 942 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau |
|---|
| 943 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 944 | DEBUG: xorg-libXau 1.0.5_0 exists in the ports tree |
|---|
| 945 | DEBUG: xorg-libXau 1.0.5_0 is the latest installed |
|---|
| 946 | DEBUG: xorg-libXau 1.0.5_0 is active |
|---|
| 947 | DEBUG: Merging existing variants into variants |
|---|
| 948 | DEBUG: new fully merged portvariants: |
|---|
| 949 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau |
|---|
| 950 | DEBUG: OS Platform: darwin |
|---|
| 951 | DEBUG: OS Version: 10.2.0 |
|---|
| 952 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 953 | DEBUG: System Arch: i386 |
|---|
| 954 | DEBUG: setting option os.universal_supported to yes |
|---|
| 955 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 956 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 957 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 958 | DEBUG: adding the default universal variant |
|---|
| 959 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 960 | DEBUG: Requested variant darwin is not provided by port xorg-libXau. |
|---|
| 961 | DEBUG: Requested variant i386 is not provided by port xorg-libXau. |
|---|
| 962 | DEBUG: Requested variant macosx is not provided by port xorg-libXau. |
|---|
| 963 | DEBUG: No need to upgrade! xorg-libXau 1.0.5_0 >= xorg-libXau 1.0.5_0 |
|---|
| 964 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto |
|---|
| 965 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 966 | DEBUG: xorg-kbproto 1.0.4_0 exists in the ports tree |
|---|
| 967 | DEBUG: xorg-kbproto 1.0.4_0 is the latest installed |
|---|
| 968 | DEBUG: xorg-kbproto 1.0.4_0 is active |
|---|
| 969 | DEBUG: Merging existing variants into variants |
|---|
| 970 | DEBUG: new fully merged portvariants: |
|---|
| 971 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto |
|---|
| 972 | DEBUG: OS Platform: darwin |
|---|
| 973 | DEBUG: OS Version: 10.2.0 |
|---|
| 974 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 975 | DEBUG: System Arch: i386 |
|---|
| 976 | DEBUG: setting option os.universal_supported to yes |
|---|
| 977 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 978 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 979 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 980 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
|---|
| 981 | DEBUG: Requested variant darwin is not provided by port xorg-kbproto. |
|---|
| 982 | DEBUG: Requested variant i386 is not provided by port xorg-kbproto. |
|---|
| 983 | DEBUG: Requested variant macosx is not provided by port xorg-kbproto. |
|---|
| 984 | DEBUG: No need to upgrade! xorg-kbproto 1.0.4_0 >= xorg-kbproto 1.0.4_0 |
|---|
| 985 | DEBUG: No need to upgrade! xorg-libX11 1.3.3_0 >= xorg-libX11 1.3.3_0 |
|---|
| 986 | DEBUG: No need to upgrade! xorg-libXext 1.1.1_0 >= xorg-libXext 1.1.1_0 |
|---|
| 987 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXt |
|---|
| 988 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 989 | DEBUG: xorg-libXt 1.0.7_1 exists in the ports tree |
|---|
| 990 | DEBUG: xorg-libXt 1.0.7_1 is the latest installed |
|---|
| 991 | DEBUG: xorg-libXt 1.0.7_1 is active |
|---|
| 992 | DEBUG: Merging existing variants into variants |
|---|
| 993 | DEBUG: new fully merged portvariants: |
|---|
| 994 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXt |
|---|
| 995 | DEBUG: OS Platform: darwin |
|---|
| 996 | DEBUG: OS Version: 10.2.0 |
|---|
| 997 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 998 | DEBUG: System Arch: i386 |
|---|
| 999 | DEBUG: setting option os.universal_supported to yes |
|---|
| 1000 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 1001 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 1002 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 1003 | DEBUG: adding the default universal variant |
|---|
| 1004 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 1005 | DEBUG: Requested variant darwin is not provided by port xorg-libXt. |
|---|
| 1006 | DEBUG: Requested variant i386 is not provided by port xorg-libXt. |
|---|
| 1007 | DEBUG: Requested variant macosx is not provided by port xorg-libXt. |
|---|
| 1008 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libsm |
|---|
| 1009 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 1010 | DEBUG: xorg-libsm 1.1.1_0 exists in the ports tree |
|---|
| 1011 | DEBUG: xorg-libsm 1.1.1_0 is the latest installed |
|---|
| 1012 | DEBUG: xorg-libsm 1.1.1_0 is active |
|---|
| 1013 | DEBUG: Merging existing variants into variants |
|---|
| 1014 | DEBUG: new fully merged portvariants: |
|---|
| 1015 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libsm |
|---|
| 1016 | DEBUG: OS Platform: darwin |
|---|
| 1017 | DEBUG: OS Version: 10.2.0 |
|---|
| 1018 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 1019 | DEBUG: System Arch: i386 |
|---|
| 1020 | DEBUG: setting option os.universal_supported to yes |
|---|
| 1021 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 1022 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 1023 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 1024 | DEBUG: adding the default universal variant |
|---|
| 1025 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 1026 | DEBUG: Requested variant darwin is not provided by port xorg-libsm. |
|---|
| 1027 | DEBUG: Requested variant i386 is not provided by port xorg-libsm. |
|---|
| 1028 | DEBUG: Requested variant macosx is not provided by port xorg-libsm. |
|---|
| 1029 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libice |
|---|
| 1030 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 1031 | DEBUG: xorg-libice 1.0.6_0 exists in the ports tree |
|---|
| 1032 | DEBUG: xorg-libice 1.0.6_0 is the latest installed |
|---|
| 1033 | DEBUG: xorg-libice 1.0.6_0 is active |
|---|
| 1034 | DEBUG: Merging existing variants into variants |
|---|
| 1035 | DEBUG: new fully merged portvariants: |
|---|
| 1036 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libice |
|---|
| 1037 | DEBUG: OS Platform: darwin |
|---|
| 1038 | DEBUG: OS Version: 10.2.0 |
|---|
| 1039 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 1040 | DEBUG: System Arch: i386 |
|---|
| 1041 | DEBUG: setting option os.universal_supported to yes |
|---|
| 1042 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 1043 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 1044 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 1045 | DEBUG: adding the default universal variant |
|---|
| 1046 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 1047 | DEBUG: Requested variant darwin is not provided by port xorg-libice. |
|---|
| 1048 | DEBUG: Requested variant i386 is not provided by port xorg-libice. |
|---|
| 1049 | DEBUG: Requested variant macosx is not provided by port xorg-libice. |
|---|
| 1050 | DEBUG: No need to upgrade! xorg-libice 1.0.6_0 >= xorg-libice 1.0.6_0 |
|---|
| 1051 | DEBUG: No need to upgrade! xorg-libsm 1.1.1_0 >= xorg-libsm 1.1.1_0 |
|---|
| 1052 | DEBUG: No need to upgrade! xorg-libXt 1.0.7_1 >= xorg-libXt 1.0.7_1 |
|---|
| 1053 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/cairo |
|---|
| 1054 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 1055 | DEBUG: cairo 1.8.8_0 exists in the ports tree |
|---|
| 1056 | DEBUG: cairo 1.8.8_0 +macosx is the latest installed |
|---|
| 1057 | DEBUG: cairo 1.8.8_0 +macosx is active |
|---|
| 1058 | DEBUG: Merging existing variants macosx into variants |
|---|
| 1059 | DEBUG: new fully merged portvariants: |
|---|
| 1060 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/cairo |
|---|
| 1061 | DEBUG: OS Platform: darwin |
|---|
| 1062 | DEBUG: OS Version: 10.2.0 |
|---|
| 1063 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 1064 | DEBUG: System Arch: i386 |
|---|
| 1065 | DEBUG: setting option os.universal_supported to yes |
|---|
| 1066 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 1067 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 1068 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 1069 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 1070 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 1071 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 1072 | DEBUG: universal variant already exists, so not adding the default one |
|---|
| 1073 | DEBUG: Requested variant darwin is not provided by port cairo. |
|---|
| 1074 | DEBUG: Requested variant i386 is not provided by port cairo. |
|---|
| 1075 | DEBUG: Executing variant macosx provides macosx |
|---|
| 1076 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpixman |
|---|
| 1077 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 1078 | DEBUG: libpixman 0.16.4_0 exists in the ports tree |
|---|
| 1079 | DEBUG: libpixman 0.16.4_0 is the latest installed |
|---|
| 1080 | DEBUG: libpixman 0.16.4_0 is active |
|---|
| 1081 | DEBUG: Merging existing variants into variants |
|---|
| 1082 | DEBUG: new fully merged portvariants: |
|---|
| 1083 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpixman |
|---|
| 1084 | DEBUG: OS Platform: darwin |
|---|
| 1085 | DEBUG: OS Version: 10.2.0 |
|---|
| 1086 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 1087 | DEBUG: System Arch: i386 |
|---|
| 1088 | DEBUG: setting option os.universal_supported to yes |
|---|
| 1089 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 1090 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 1091 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 1092 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 1093 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 1094 | DEBUG: universal variant already exists, so not adding the default one |
|---|
| 1095 | DEBUG: Requested variant darwin is not provided by port libpixman. |
|---|
| 1096 | DEBUG: Requested variant i386 is not provided by port libpixman. |
|---|
| 1097 | DEBUG: Requested variant macosx is not provided by port libpixman. |
|---|
| 1098 | DEBUG: No need to upgrade! libpixman 0.16.4_0 >= libpixman 0.16.4_0 |
|---|
| 1099 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender |
|---|
| 1100 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 1101 | DEBUG: xrender 0.9.5_0 exists in the ports tree |
|---|
| 1102 | DEBUG: xrender 0.9.5_0 is the latest installed |
|---|
| 1103 | DEBUG: xrender 0.9.5_0 is active |
|---|
| 1104 | DEBUG: Merging existing variants into variants |
|---|
| 1105 | DEBUG: new fully merged portvariants: |
|---|
| 1106 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender |
|---|
| 1107 | DEBUG: OS Platform: darwin |
|---|
| 1108 | DEBUG: OS Version: 10.2.0 |
|---|
| 1109 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 1110 | DEBUG: System Arch: i386 |
|---|
| 1111 | DEBUG: setting option os.universal_supported to yes |
|---|
| 1112 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 1113 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 1114 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 1115 | DEBUG: adding the default universal variant |
|---|
| 1116 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 1117 | DEBUG: Requested variant darwin is not provided by port xrender. |
|---|
| 1118 | DEBUG: Requested variant i386 is not provided by port xrender. |
|---|
| 1119 | DEBUG: Requested variant macosx is not provided by port xrender. |
|---|
| 1120 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-renderproto |
|---|
| 1121 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 1122 | DEBUG: xorg-renderproto 0.11_0 exists in the ports tree |
|---|
| 1123 | DEBUG: xorg-renderproto 0.11_0 is the latest installed |
|---|
| 1124 | DEBUG: xorg-renderproto 0.11_0 is active |
|---|
| 1125 | DEBUG: Merging existing variants into variants |
|---|
| 1126 | DEBUG: new fully merged portvariants: |
|---|
| 1127 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-renderproto |
|---|
| 1128 | DEBUG: OS Platform: darwin |
|---|
| 1129 | DEBUG: OS Version: 10.2.0 |
|---|
| 1130 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 1131 | DEBUG: System Arch: i386 |
|---|
| 1132 | DEBUG: setting option os.universal_supported to yes |
|---|
| 1133 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 1134 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 1135 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 1136 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
|---|
| 1137 | DEBUG: Requested variant darwin is not provided by port xorg-renderproto. |
|---|
| 1138 | DEBUG: Requested variant i386 is not provided by port xorg-renderproto. |
|---|
| 1139 | DEBUG: Requested variant macosx is not provided by port xorg-renderproto. |
|---|
| 1140 | DEBUG: No need to upgrade! xorg-renderproto 0.11_0 >= xorg-renderproto 0.11_0 |
|---|
| 1141 | DEBUG: No need to upgrade! xrender 0.9.5_0 >= xrender 0.9.5_0 |
|---|
| 1142 | DEBUG: No need to upgrade! cairo 1.8.8_0 >= cairo 1.8.8_0 |
|---|
| 1143 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg |
|---|
| 1144 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 1145 | DEBUG: jpeg 7_0 exists in the ports tree |
|---|
| 1146 | DEBUG: jpeg 7_0 is the latest installed |
|---|
| 1147 | DEBUG: jpeg 7_0 is active |
|---|
| 1148 | DEBUG: Merging existing variants into variants |
|---|
| 1149 | DEBUG: new fully merged portvariants: |
|---|
| 1150 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg |
|---|
| 1151 | DEBUG: OS Platform: darwin |
|---|
| 1152 | DEBUG: OS Version: 10.2.0 |
|---|
| 1153 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 1154 | DEBUG: System Arch: i386 |
|---|
| 1155 | DEBUG: setting option os.universal_supported to yes |
|---|
| 1156 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 1157 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 1158 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 1159 | DEBUG: adding the default universal variant |
|---|
| 1160 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 1161 | DEBUG: Requested variant darwin is not provided by port jpeg. |
|---|
| 1162 | DEBUG: Requested variant i386 is not provided by port jpeg. |
|---|
| 1163 | DEBUG: Requested variant macosx is not provided by port jpeg. |
|---|
| 1164 | DEBUG: No need to upgrade! jpeg 7_0 >= jpeg 7_0 |
|---|
| 1165 | DEBUG: No need to upgrade! ghostscript 8.70_1 >= ghostscript 8.70_1 |
|---|
| 1166 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/tex/texlive_texmf-minimal |
|---|
| 1167 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 1168 | DEBUG: texlive_texmf-minimal 2007_3 exists in the ports tree |
|---|
| 1169 | DEBUG: texlive_texmf-minimal 2007_3 is the latest installed |
|---|
| 1170 | DEBUG: texlive_texmf-minimal 2007_3 is active |
|---|
| 1171 | DEBUG: Merging existing variants into variants |
|---|
| 1172 | DEBUG: new fully merged portvariants: |
|---|
| 1173 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/tex/texlive_texmf-minimal |
|---|
| 1174 | DEBUG: OS Platform: darwin |
|---|
| 1175 | DEBUG: OS Version: 10.2.0 |
|---|
| 1176 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 1177 | DEBUG: System Arch: i386 |
|---|
| 1178 | DEBUG: setting option os.universal_supported to yes |
|---|
| 1179 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 1180 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 1181 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 1182 | DEBUG: not using configure, so not adding the default universal variant |
|---|
| 1183 | DEBUG: Requested variant darwin is not provided by port texlive_texmf-minimal. |
|---|
| 1184 | DEBUG: Requested variant i386 is not provided by port texlive_texmf-minimal. |
|---|
| 1185 | DEBUG: Requested variant macosx is not provided by port texlive_texmf-minimal. |
|---|
| 1186 | DEBUG: No need to upgrade! texlive_texmf-minimal 2007_3 >= texlive_texmf-minimal 2007_3 |
|---|
| 1187 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/tex/texlive_texmf-full |
|---|
| 1188 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 1189 | DEBUG: texlive_texmf-full 2007_4 exists in the ports tree |
|---|
| 1190 | DEBUG: texlive_texmf-full 2007_4 is the latest installed |
|---|
| 1191 | DEBUG: texlive_texmf-full 2007_4 is active |
|---|
| 1192 | DEBUG: Merging existing variants into variants |
|---|
| 1193 | DEBUG: new fully merged portvariants: |
|---|
| 1194 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/tex/texlive_texmf-full |
|---|
| 1195 | DEBUG: OS Platform: darwin |
|---|
| 1196 | DEBUG: OS Version: 10.2.0 |
|---|
| 1197 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 1198 | DEBUG: System Arch: i386 |
|---|
| 1199 | DEBUG: setting option os.universal_supported to yes |
|---|
| 1200 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 1201 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 1202 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 1203 | DEBUG: not using configure, so not adding the default universal variant |
|---|
| 1204 | DEBUG: Requested variant darwin is not provided by port texlive_texmf-full. |
|---|
| 1205 | DEBUG: Requested variant i386 is not provided by port texlive_texmf-full. |
|---|
| 1206 | DEBUG: Requested variant macosx is not provided by port texlive_texmf-full. |
|---|
| 1207 | DEBUG: No need to upgrade! texlive_texmf-full 2007_4 >= texlive_texmf-full 2007_4 |
|---|
| 1208 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXp |
|---|
| 1209 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 1210 | DEBUG: xorg-libXp 1.0.0_3 exists in the ports tree |
|---|
| 1211 | DEBUG: xorg-libXp 1.0.0_3 is the latest installed |
|---|
| 1212 | DEBUG: xorg-libXp 1.0.0_3 is active |
|---|
| 1213 | DEBUG: Merging existing variants into variants |
|---|
| 1214 | DEBUG: new fully merged portvariants: |
|---|
| 1215 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXp |
|---|
| 1216 | DEBUG: OS Platform: darwin |
|---|
| 1217 | DEBUG: OS Version: 10.2.0 |
|---|
| 1218 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 1219 | DEBUG: System Arch: i386 |
|---|
| 1220 | DEBUG: setting option os.universal_supported to yes |
|---|
| 1221 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 1222 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 1223 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 1224 | DEBUG: adding the default universal variant |
|---|
| 1225 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 1226 | DEBUG: Requested variant darwin is not provided by port xorg-libXp. |
|---|
| 1227 | DEBUG: Requested variant i386 is not provided by port xorg-libXp. |
|---|
| 1228 | DEBUG: Requested variant macosx is not provided by port xorg-libXp. |
|---|
| 1229 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libpthread-stubs |
|---|
| 1230 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 1231 | DEBUG: xorg-libpthread-stubs 0.3_0 exists in the ports tree |
|---|
| 1232 | DEBUG: xorg-libpthread-stubs 0.3_0 is the latest installed |
|---|
| 1233 | DEBUG: xorg-libpthread-stubs 0.3_0 is active |
|---|
| 1234 | DEBUG: Merging existing variants into variants |
|---|
| 1235 | DEBUG: new fully merged portvariants: |
|---|
| 1236 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libpthread-stubs |
|---|
| 1237 | DEBUG: OS Platform: darwin |
|---|
| 1238 | DEBUG: OS Version: 10.2.0 |
|---|
| 1239 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 1240 | DEBUG: System Arch: i386 |
|---|
| 1241 | DEBUG: setting option os.universal_supported to yes |
|---|
| 1242 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 1243 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 1244 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 1245 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
|---|
| 1246 | DEBUG: Requested variant darwin is not provided by port xorg-libpthread-stubs. |
|---|
| 1247 | DEBUG: Requested variant i386 is not provided by port xorg-libpthread-stubs. |
|---|
| 1248 | DEBUG: Requested variant macosx is not provided by port xorg-libpthread-stubs. |
|---|
| 1249 | DEBUG: No need to upgrade! xorg-libpthread-stubs 0.3_0 >= xorg-libpthread-stubs 0.3_0 |
|---|
| 1250 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-printproto |
|---|
| 1251 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 1252 | DEBUG: xorg-printproto 1.0.4_0 exists in the ports tree |
|---|
| 1253 | DEBUG: xorg-printproto 1.0.4_0 is the latest installed |
|---|
| 1254 | DEBUG: xorg-printproto 1.0.4_0 is active |
|---|
| 1255 | DEBUG: Merging existing variants into variants |
|---|
| 1256 | DEBUG: new fully merged portvariants: |
|---|
| 1257 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-printproto |
|---|
| 1258 | DEBUG: OS Platform: darwin |
|---|
| 1259 | DEBUG: OS Version: 10.2.0 |
|---|
| 1260 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 1261 | DEBUG: System Arch: i386 |
|---|
| 1262 | DEBUG: setting option os.universal_supported to yes |
|---|
| 1263 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 1264 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 1265 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 1266 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
|---|
| 1267 | DEBUG: Requested variant darwin is not provided by port xorg-printproto. |
|---|
| 1268 | DEBUG: Requested variant i386 is not provided by port xorg-printproto. |
|---|
| 1269 | DEBUG: Requested variant macosx is not provided by port xorg-printproto. |
|---|
| 1270 | DEBUG: No need to upgrade! xorg-printproto 1.0.4_0 >= xorg-printproto 1.0.4_0 |
|---|
| 1271 | DEBUG: No need to upgrade! xorg-libXp 1.0.0_3 >= xorg-libXp 1.0.0_3 |
|---|
| 1272 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/openmotif |
|---|
| 1273 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 1274 | DEBUG: openmotif 2.3.2_1 exists in the ports tree |
|---|
| 1275 | DEBUG: openmotif 2.3.2_1 is the latest installed |
|---|
| 1276 | DEBUG: openmotif 2.3.2_1 is active |
|---|
| 1277 | DEBUG: Merging existing variants into variants |
|---|
| 1278 | DEBUG: new fully merged portvariants: |
|---|
| 1279 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/openmotif |
|---|
| 1280 | DEBUG: OS Platform: darwin |
|---|
| 1281 | DEBUG: OS Version: 10.2.0 |
|---|
| 1282 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 1283 | DEBUG: System Arch: i386 |
|---|
| 1284 | DEBUG: setting option os.universal_supported to yes |
|---|
| 1285 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 1286 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 1287 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 1288 | DEBUG: adding the default universal variant |
|---|
| 1289 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 1290 | DEBUG: Requested variant darwin is not provided by port openmotif. |
|---|
| 1291 | DEBUG: Requested variant i386 is not provided by port openmotif. |
|---|
| 1292 | DEBUG: Requested variant macosx is not provided by port openmotif. |
|---|
| 1293 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xbitmaps |
|---|
| 1294 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 1295 | DEBUG: xbitmaps 1.1.0_0 exists in the ports tree |
|---|
| 1296 | DEBUG: xbitmaps 1.1.0_0 is the latest installed |
|---|
| 1297 | DEBUG: xbitmaps 1.1.0_0 is active |
|---|
| 1298 | DEBUG: Merging existing variants into variants |
|---|
| 1299 | DEBUG: new fully merged portvariants: |
|---|
| 1300 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xbitmaps |
|---|
| 1301 | DEBUG: OS Platform: darwin |
|---|
| 1302 | DEBUG: OS Version: 10.2.0 |
|---|
| 1303 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 1304 | DEBUG: System Arch: i386 |
|---|
| 1305 | DEBUG: setting option os.universal_supported to yes |
|---|
| 1306 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 1307 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 1308 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 1309 | DEBUG: adding the default universal variant |
|---|
| 1310 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 1311 | DEBUG: Requested variant darwin is not provided by port xbitmaps. |
|---|
| 1312 | DEBUG: Requested variant i386 is not provided by port xbitmaps. |
|---|
| 1313 | DEBUG: Requested variant macosx is not provided by port xbitmaps. |
|---|
| 1314 | DEBUG: No need to upgrade! xbitmaps 1.1.0_0 >= xbitmaps 1.1.0_0 |
|---|
| 1315 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2 |
|---|
| 1316 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 1317 | DEBUG: Xft2 2.1.14_0 exists in the ports tree |
|---|
| 1318 | DEBUG: Xft2 2.1.14_0 is the latest installed |
|---|
| 1319 | DEBUG: Xft2 2.1.14_0 is active |
|---|
| 1320 | DEBUG: Merging existing variants into variants |
|---|
| 1321 | DEBUG: new fully merged portvariants: |
|---|
| 1322 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2 |
|---|
| 1323 | DEBUG: OS Platform: darwin |
|---|
| 1324 | DEBUG: OS Version: 10.2.0 |
|---|
| 1325 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 1326 | DEBUG: System Arch: i386 |
|---|
| 1327 | DEBUG: setting option os.universal_supported to yes |
|---|
| 1328 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 1329 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 1330 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 1331 | DEBUG: adding the default universal variant |
|---|
| 1332 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 1333 | DEBUG: Requested variant darwin is not provided by port Xft2. |
|---|
| 1334 | DEBUG: Requested variant i386 is not provided by port Xft2. |
|---|
| 1335 | DEBUG: Requested variant macosx is not provided by port Xft2. |
|---|
| 1336 | DEBUG: No need to upgrade! Xft2 2.1.14_0 >= Xft2 2.1.14_0 |
|---|
| 1337 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXmu |
|---|
| 1338 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 1339 | DEBUG: xorg-libXmu 1.0.5_0 exists in the ports tree |
|---|
| 1340 | DEBUG: xorg-libXmu 1.0.5_0 is the latest installed |
|---|
| 1341 | DEBUG: xorg-libXmu 1.0.5_0 is active |
|---|
| 1342 | DEBUG: Merging existing variants into variants |
|---|
| 1343 | DEBUG: new fully merged portvariants: |
|---|
| 1344 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXmu |
|---|
| 1345 | DEBUG: OS Platform: darwin |
|---|
| 1346 | DEBUG: OS Version: 10.2.0 |
|---|
| 1347 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 1348 | DEBUG: System Arch: i386 |
|---|
| 1349 | DEBUG: setting option os.universal_supported to yes |
|---|
| 1350 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 1351 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 1352 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 1353 | DEBUG: adding the default universal variant |
|---|
| 1354 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 1355 | DEBUG: Requested variant darwin is not provided by port xorg-libXmu. |
|---|
| 1356 | DEBUG: Requested variant i386 is not provided by port xorg-libXmu. |
|---|
| 1357 | DEBUG: Requested variant macosx is not provided by port xorg-libXmu. |
|---|
| 1358 | DEBUG: No need to upgrade! xorg-libXmu 1.0.5_0 >= xorg-libXmu 1.0.5_0 |
|---|
| 1359 | DEBUG: No need to upgrade! openmotif 2.3.2_1 >= openmotif 2.3.2_1 |
|---|
| 1360 | DEBUG: No need to upgrade! texlive_base 2007_7 >= texlive_base 2007_7 |
|---|
| 1361 | DEBUG: No need to upgrade! texlive 2007_6 >= texlive 2007_6 |
|---|
| 1362 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2 |
|---|
| 1363 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 1364 | DEBUG: libxml2 2.7.6_0 exists in the ports tree |
|---|
| 1365 | DEBUG: libxml2 2.7.6_0 is the latest installed |
|---|
| 1366 | DEBUG: libxml2 2.7.6_0 is active |
|---|
| 1367 | DEBUG: Merging existing variants into variants |
|---|
| 1368 | DEBUG: new fully merged portvariants: |
|---|
| 1369 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2 |
|---|
| 1370 | DEBUG: OS Platform: darwin |
|---|
| 1371 | DEBUG: OS Version: 10.2.0 |
|---|
| 1372 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 1373 | DEBUG: System Arch: i386 |
|---|
| 1374 | DEBUG: setting option os.universal_supported to yes |
|---|
| 1375 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 1376 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 1377 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 1378 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 1379 | DEBUG: adding the default universal variant |
|---|
| 1380 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 1381 | DEBUG: Requested variant darwin is not provided by port libxml2. |
|---|
| 1382 | DEBUG: Requested variant i386 is not provided by port libxml2. |
|---|
| 1383 | DEBUG: Requested variant macosx is not provided by port libxml2. |
|---|
| 1384 | DEBUG: No need to upgrade! libxml2 2.7.6_0 >= libxml2 2.7.6_0 |
|---|
| 1385 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxslt |
|---|
| 1386 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 1387 | DEBUG: libxslt 1.1.26_0 exists in the ports tree |
|---|
| 1388 | DEBUG: libxslt 1.1.26_0 is the latest installed |
|---|
| 1389 | DEBUG: libxslt 1.1.26_0 is active |
|---|
| 1390 | DEBUG: Merging existing variants into variants |
|---|
| 1391 | DEBUG: new fully merged portvariants: |
|---|
| 1392 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxslt |
|---|
| 1393 | DEBUG: OS Platform: darwin |
|---|
| 1394 | DEBUG: OS Version: 10.2.0 |
|---|
| 1395 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 1396 | DEBUG: System Arch: i386 |
|---|
| 1397 | DEBUG: setting option os.universal_supported to yes |
|---|
| 1398 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 1399 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 1400 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 1401 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 1402 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 1403 | DEBUG: universal variant already exists, so not adding the default one |
|---|
| 1404 | DEBUG: Requested variant darwin is not provided by port libxslt. |
|---|
| 1405 | DEBUG: Requested variant i386 is not provided by port libxslt. |
|---|
| 1406 | DEBUG: Requested variant macosx is not provided by port libxslt. |
|---|
| 1407 | DEBUG: No need to upgrade! libxslt 1.1.26_0 >= libxslt 1.1.26_0 |
|---|
| 1408 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml |
|---|
| 1409 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 1410 | DEBUG: docbook-xml 5.0_0 exists in the ports tree |
|---|
| 1411 | DEBUG: docbook-xml 5.0_0 is the latest installed |
|---|
| 1412 | DEBUG: docbook-xml 5.0_0 is active |
|---|
| 1413 | DEBUG: Merging existing variants into variants |
|---|
| 1414 | DEBUG: new fully merged portvariants: |
|---|
| 1415 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml |
|---|
| 1416 | DEBUG: OS Platform: darwin |
|---|
| 1417 | DEBUG: OS Version: 10.2.0 |
|---|
| 1418 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 1419 | DEBUG: System Arch: i386 |
|---|
| 1420 | DEBUG: setting option os.universal_supported to yes |
|---|
| 1421 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 1422 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 1423 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 1424 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
|---|
| 1425 | DEBUG: Requested variant darwin is not provided by port docbook-xml. |
|---|
| 1426 | DEBUG: Requested variant i386 is not provided by port docbook-xml. |
|---|
| 1427 | DEBUG: Requested variant macosx is not provided by port docbook-xml. |
|---|
| 1428 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.1.2 |
|---|
| 1429 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 1430 | DEBUG: docbook-xml-4.1.2 4.1.2_1 exists in the ports tree |
|---|
| 1431 | DEBUG: docbook-xml-4.1.2 4.1.2_1 is the latest installed |
|---|
| 1432 | DEBUG: docbook-xml-4.1.2 4.1.2_1 is active |
|---|
| 1433 | DEBUG: Merging existing variants into variants |
|---|
| 1434 | DEBUG: new fully merged portvariants: |
|---|
| 1435 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.1.2 |
|---|
| 1436 | DEBUG: OS Platform: darwin |
|---|
| 1437 | DEBUG: OS Version: 10.2.0 |
|---|
| 1438 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 1439 | DEBUG: System Arch: i386 |
|---|
| 1440 | DEBUG: setting option os.universal_supported to yes |
|---|
| 1441 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 1442 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 1443 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 1444 | DEBUG: not using configure, so not adding the default universal variant |
|---|
| 1445 | DEBUG: Requested variant darwin is not provided by port docbook-xml-4.1.2. |
|---|
| 1446 | DEBUG: Requested variant i386 is not provided by port docbook-xml-4.1.2. |
|---|
| 1447 | DEBUG: Requested variant macosx is not provided by port docbook-xml-4.1.2. |
|---|
| 1448 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/unzip |
|---|
| 1449 | DEBUG: unzip is *not* installed by MacPorts |
|---|
| 1450 | DEBUG: Searching for dependency: unzip |
|---|
| 1451 | DEBUG: Didn't find receipt, going to depspec regex for: unzip |
|---|
| 1452 | DEBUG: Found Dependency: path: /usr/bin filename: unzip regex: ^unzip$ |
|---|
| 1453 | DEBUG: unzip not installed, soft dependency satisfied |
|---|
| 1454 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/xmlcatmgr |
|---|
| 1455 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 1456 | DEBUG: xmlcatmgr 2.2_1 exists in the ports tree |
|---|
| 1457 | DEBUG: xmlcatmgr 2.2_1 is the latest installed |
|---|
| 1458 | DEBUG: xmlcatmgr 2.2_1 is active |
|---|
| 1459 | DEBUG: Merging existing variants into variants |
|---|
| 1460 | DEBUG: new fully merged portvariants: |
|---|
| 1461 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/xmlcatmgr |
|---|
| 1462 | DEBUG: OS Platform: darwin |
|---|
| 1463 | DEBUG: OS Version: 10.2.0 |
|---|
| 1464 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 1465 | DEBUG: System Arch: i386 |
|---|
| 1466 | DEBUG: setting option os.universal_supported to yes |
|---|
| 1467 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 1468 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 1469 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 1470 | DEBUG: adding the default universal variant |
|---|
| 1471 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 1472 | DEBUG: Requested variant darwin is not provided by port xmlcatmgr. |
|---|
| 1473 | DEBUG: Requested variant i386 is not provided by port xmlcatmgr. |
|---|
| 1474 | DEBUG: Requested variant macosx is not provided by port xmlcatmgr. |
|---|
| 1475 | DEBUG: No need to upgrade! xmlcatmgr 2.2_1 >= xmlcatmgr 2.2_1 |
|---|
| 1476 | DEBUG: No need to upgrade! docbook-xml-4.1.2 4.1.2_1 >= docbook-xml-4.1.2 4.1.2_1 |
|---|
| 1477 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.2 |
|---|
| 1478 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 1479 | DEBUG: docbook-xml-4.2 4.2_0 exists in the ports tree |
|---|
| 1480 | DEBUG: docbook-xml-4.2 4.2_0 is the latest installed |
|---|
| 1481 | DEBUG: docbook-xml-4.2 4.2_0 is active |
|---|
| 1482 | DEBUG: Merging existing variants into variants |
|---|
| 1483 | DEBUG: new fully merged portvariants: |
|---|
| 1484 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.2 |
|---|
| 1485 | DEBUG: OS Platform: darwin |
|---|
| 1486 | DEBUG: OS Version: 10.2.0 |
|---|
| 1487 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 1488 | DEBUG: System Arch: i386 |
|---|
| 1489 | DEBUG: setting option os.universal_supported to yes |
|---|
| 1490 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 1491 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 1492 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 1493 | DEBUG: not using configure, so not adding the default universal variant |
|---|
| 1494 | DEBUG: Requested variant darwin is not provided by port docbook-xml-4.2. |
|---|
| 1495 | DEBUG: Requested variant i386 is not provided by port docbook-xml-4.2. |
|---|
| 1496 | DEBUG: Requested variant macosx is not provided by port docbook-xml-4.2. |
|---|
| 1497 | DEBUG: No need to upgrade! docbook-xml-4.2 4.2_0 >= docbook-xml-4.2 4.2_0 |
|---|
| 1498 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.3 |
|---|
| 1499 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 1500 | DEBUG: docbook-xml-4.3 4.3_0 exists in the ports tree |
|---|
| 1501 | DEBUG: docbook-xml-4.3 4.3_0 is the latest installed |
|---|
| 1502 | DEBUG: docbook-xml-4.3 4.3_0 is active |
|---|
| 1503 | DEBUG: Merging existing variants into variants |
|---|
| 1504 | DEBUG: new fully merged portvariants: |
|---|
| 1505 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.3 |
|---|
| 1506 | DEBUG: OS Platform: darwin |
|---|
| 1507 | DEBUG: OS Version: 10.2.0 |
|---|
| 1508 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 1509 | DEBUG: System Arch: i386 |
|---|
| 1510 | DEBUG: setting option os.universal_supported to yes |
|---|
| 1511 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 1512 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 1513 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 1514 | DEBUG: not using configure, so not adding the default universal variant |
|---|
| 1515 | DEBUG: Requested variant darwin is not provided by port docbook-xml-4.3. |
|---|
| 1516 | DEBUG: Requested variant i386 is not provided by port docbook-xml-4.3. |
|---|
| 1517 | DEBUG: Requested variant macosx is not provided by port docbook-xml-4.3. |
|---|
| 1518 | DEBUG: No need to upgrade! docbook-xml-4.3 4.3_0 >= docbook-xml-4.3 4.3_0 |
|---|
| 1519 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.4 |
|---|
| 1520 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 1521 | DEBUG: docbook-xml-4.4 4.4_0 exists in the ports tree |
|---|
| 1522 | DEBUG: docbook-xml-4.4 4.4_0 is the latest installed |
|---|
| 1523 | DEBUG: docbook-xml-4.4 4.4_0 is active |
|---|
| 1524 | DEBUG: Merging existing variants into variants |
|---|
| 1525 | DEBUG: new fully merged portvariants: |
|---|
| 1526 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.4 |
|---|
| 1527 | DEBUG: OS Platform: darwin |
|---|
| 1528 | DEBUG: OS Version: 10.2.0 |
|---|
| 1529 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 1530 | DEBUG: System Arch: i386 |
|---|
| 1531 | DEBUG: setting option os.universal_supported to yes |
|---|
| 1532 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 1533 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 1534 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 1535 | DEBUG: not using configure, so not adding the default universal variant |
|---|
| 1536 | DEBUG: Requested variant darwin is not provided by port docbook-xml-4.4. |
|---|
| 1537 | DEBUG: Requested variant i386 is not provided by port docbook-xml-4.4. |
|---|
| 1538 | DEBUG: Requested variant macosx is not provided by port docbook-xml-4.4. |
|---|
| 1539 | DEBUG: No need to upgrade! docbook-xml-4.4 4.4_0 >= docbook-xml-4.4 4.4_0 |
|---|
| 1540 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.5 |
|---|
| 1541 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 1542 | DEBUG: docbook-xml-4.5 4.5_0 exists in the ports tree |
|---|
| 1543 | DEBUG: docbook-xml-4.5 4.5_0 is the latest installed |
|---|
| 1544 | DEBUG: docbook-xml-4.5 4.5_0 is active |
|---|
| 1545 | DEBUG: Merging existing variants into variants |
|---|
| 1546 | DEBUG: new fully merged portvariants: |
|---|
| 1547 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.5 |
|---|
| 1548 | DEBUG: OS Platform: darwin |
|---|
| 1549 | DEBUG: OS Version: 10.2.0 |
|---|
| 1550 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 1551 | DEBUG: System Arch: i386 |
|---|
| 1552 | DEBUG: setting option os.universal_supported to yes |
|---|
| 1553 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 1554 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 1555 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 1556 | DEBUG: not using configure, so not adding the default universal variant |
|---|
| 1557 | DEBUG: Requested variant darwin is not provided by port docbook-xml-4.5. |
|---|
| 1558 | DEBUG: Requested variant i386 is not provided by port docbook-xml-4.5. |
|---|
| 1559 | DEBUG: Requested variant macosx is not provided by port docbook-xml-4.5. |
|---|
| 1560 | DEBUG: No need to upgrade! docbook-xml-4.5 4.5_0 >= docbook-xml-4.5 4.5_0 |
|---|
| 1561 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-5.0 |
|---|
| 1562 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 1563 | DEBUG: docbook-xml-5.0 5.0_0 exists in the ports tree |
|---|
| 1564 | DEBUG: docbook-xml-5.0 5.0_0 is the latest installed |
|---|
| 1565 | DEBUG: docbook-xml-5.0 5.0_0 is active |
|---|
| 1566 | DEBUG: Merging existing variants into variants |
|---|
| 1567 | DEBUG: new fully merged portvariants: |
|---|
| 1568 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-5.0 |
|---|
| 1569 | DEBUG: OS Platform: darwin |
|---|
| 1570 | DEBUG: OS Version: 10.2.0 |
|---|
| 1571 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 1572 | DEBUG: System Arch: i386 |
|---|
| 1573 | DEBUG: setting option os.universal_supported to yes |
|---|
| 1574 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 1575 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 1576 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 1577 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
|---|
| 1578 | DEBUG: Requested variant darwin is not provided by port docbook-xml-5.0. |
|---|
| 1579 | DEBUG: Requested variant i386 is not provided by port docbook-xml-5.0. |
|---|
| 1580 | DEBUG: Requested variant macosx is not provided by port docbook-xml-5.0. |
|---|
| 1581 | DEBUG: No need to upgrade! docbook-xml-5.0 5.0_0 >= docbook-xml-5.0 5.0_0 |
|---|
| 1582 | DEBUG: No need to upgrade! docbook-xml 5.0_0 >= docbook-xml 5.0_0 |
|---|
| 1583 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xsl |
|---|
| 1584 | DEBUG: epoch: in tree: 0 installed: 0 |
|---|
| 1585 | DEBUG: docbook-xsl 1.75.2_0 exists in the ports tree |
|---|
| 1586 | DEBUG: docbook-xsl 1.75.2_0 is the latest installed |
|---|
| 1587 | DEBUG: docbook-xsl 1.75.2_0 is active |
|---|
| 1588 | DEBUG: Merging existing variants into variants |
|---|
| 1589 | DEBUG: new fully merged portvariants: |
|---|
| 1590 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xsl |
|---|
| 1591 | DEBUG: OS Platform: darwin |
|---|
| 1592 | DEBUG: OS Version: 10.2.0 |
|---|
| 1593 | DEBUG: Mac OS X Version: 10.6 |
|---|
| 1594 | DEBUG: System Arch: i386 |
|---|
| 1595 | DEBUG: setting option os.universal_supported to yes |
|---|
| 1596 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 1597 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 1598 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 1599 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
|---|
| 1600 | DEBUG: Requested variant darwin is not provided by port docbook-xsl. |
|---|
| 1601 | DEBUG: Requested variant i386 is not provided by port docbook-xsl. |
|---|
| 1602 | DEBUG: Requested variant macosx is not provided by port docbook-xsl. |
|---|
| 1603 | DEBUG: No need to upgrade! docbook-xsl 1.75.2_0 >= docbook-xsl 1.75.2_0 |
|---|
| 1604 | DEBUG: No need to upgrade! xmlto 0.0.23_0 >= xmlto 0.0.23_0 |
|---|
| 1605 | ---> Computing dependencies for libzzip |
|---|
| 1606 | DEBUG: Searching for dependency: zlib |
|---|
| 1607 | DEBUG: Found Dependency: receipt exists for zlib |
|---|
| 1608 | DEBUG: Searching for dependency: pkgconfig |
|---|
| 1609 | DEBUG: Found Dependency: receipt exists for pkgconfig |
|---|
| 1610 | DEBUG: Searching for dependency: xmlto |
|---|
| 1611 | DEBUG: Found Dependency: receipt exists for xmlto |
|---|
| 1612 | DEBUG: Executing org.macports.main (libzzip) |
|---|
| 1613 | DEBUG: Skipping completed org.macports.fetch (libzzip) |
|---|
| 1614 | DEBUG: Skipping completed org.macports.checksum (libzzip) |
|---|
| 1615 | DEBUG: setting option extract.cmd to /usr/bin/bzip2 |
|---|
| 1616 | DEBUG: Skipping completed org.macports.extract (libzzip) |
|---|
| 1617 | DEBUG: Skipping completed org.macports.patch (libzzip) |
|---|
| 1618 | ---> Configuring libzzip |
|---|
| 1619 | DEBUG: Using compiler 'Mac OS X gcc 4.2' |
|---|
| 1620 | DEBUG: Executing org.macports.configure (libzzip) |
|---|
| 1621 | DEBUG: Environment: CFLAGS='-O2 -arch x86_64 -arch i386' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-O2 -arch x86_64 -arch i386' MACOSX_DEPLOYMENT_TARGET='10.6' CXX='/usr/bin/g++-4.2' F90FLAGS='-O2' LDFLAGS='-L/opt/local/lib -arch x86_64 -arch i386' OBJC='/usr/bin/gcc-4.2' FCFLAGS='-O2' INSTALL='/usr/bin/install -c' OBJCFLAGS='-O2 -arch x86_64 -arch i386' FFLAGS='-O2' CC='/usr/bin/gcc-4.2' |
|---|
| 1622 | DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_archivers_libzzip/work/zziplib-0.13.49" && ./configure --prefix=/opt/local --disable-dependency-tracking --enable-default-pkgconfigdir=/opt/local/lib/pkgconfig' |
|---|
| 1623 | checking build system type... i686-apple-darwin10.2.0 |
|---|
| 1624 | checking host system type... i686-apple-darwin10.2.0 |
|---|
| 1625 | checking target system type... i686-apple-darwin10.2.0 |
|---|
| 1626 | continue configure in default builddir "./Darwin_10.2.0_i386.d" |
|---|
| 1627 | ....exec /bin/sh ".././configure" "--srcdir=.." "--enable-builddir=Darwin_10.2.0_i386.d" '--prefix=/opt/local' '--disable-dependency-tracking' '--enable-default-pkgconfigdir=/opt/local/lib/pkgconfig' 'CC=/usr/bin/gcc-4.2' 'CFLAGS=-O2 -arch x86_64 -arch i386' 'LDFLAGS=-L/opt/local/lib -arch x86_64 -arch i386' 'CPPFLAGS=-I/opt/local/include' 'CXX=/usr/bin/g++-4.2' 'CXXFLAGS=-O2 -arch x86_64 -arch i386' 'FFLAGS=-O2' |
|---|
| 1628 | checking build system type... i686-apple-darwin10.2.0 |
|---|
| 1629 | checking host system type... i686-apple-darwin10.2.0 |
|---|
| 1630 | checking target system type... i686-apple-darwin10.2.0 |
|---|
| 1631 | checking for gsed... sed |
|---|
| 1632 | checking default prefix system... is /opt-package |
|---|
| 1633 | ...using thread-safe linkage |
|---|
| 1634 | checking zlib install prefix... none |
|---|
| 1635 | checking rpm spec file... ../zziplib.spec |
|---|
| 1636 | checking for spec package... zziplib |
|---|
| 1637 | checking for spec version... 0.13.49 |
|---|
| 1638 | checking for spec license type... GNU LGPL |
|---|
| 1639 | checking for spec summary... ZZipLib - libZ-based ZIP-access Library |
|---|
| 1640 | checking for spec category... Development/Libraries |
|---|
| 1641 | checking for spec icon... zziplib-icon.png (fallback) |
|---|
| 1642 | checking for a BSD-compatible install... /usr/bin/install -c |
|---|
| 1643 | checking whether build environment is sane... yes |
|---|
| 1644 | checking for gawk... no |
|---|
| 1645 | checking for mawk... no |
|---|
| 1646 | checking for nawk... no |
|---|
| 1647 | checking for awk... awk |
|---|
| 1648 | checking whether make sets $(MAKE)... yes |
|---|
| 1649 | checking for gcc... /usr/bin/gcc-4.2 |
|---|
| 1650 | checking for C compiler default output file name... a.out |
|---|
| 1651 | checking whether the C compiler works... yes |
|---|
| 1652 | checking whether we are cross compiling... no |
|---|
| 1653 | checking for suffix of executables... |
|---|
| 1654 | checking for suffix of object files... o |
|---|
| 1655 | checking whether we are using the GNU C compiler... yes |
|---|
| 1656 | checking whether /usr/bin/gcc-4.2 accepts -g... yes |
|---|
| 1657 | checking for /usr/bin/gcc-4.2 option to accept ISO C89... none needed |
|---|
| 1658 | checking for style of include used by make... GNU |
|---|
| 1659 | checking dependency style of /usr/bin/gcc-4.2... none |
|---|
| 1660 | checking for a BSD-compatible install... /usr/bin/install -c |
|---|
| 1661 | checking for a sed that does not truncate output... /usr/bin/sed |
|---|
| 1662 | checking for grep that handles long lines and -e... /usr/bin/grep |
|---|
| 1663 | checking for egrep... /usr/bin/grep -E |
|---|
| 1664 | checking for ld used by /usr/bin/gcc-4.2... /usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld |
|---|
| 1665 | checking if the linker (/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) is GNU ld... no |
|---|
| 1666 | checking for /usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld option to reload object files... -r |
|---|
| 1667 | checking for BSD-compatible nm... /usr/bin/nm |
|---|
| 1668 | checking whether ln -s works... yes |
|---|
| 1669 | checking how to recognise dependent libraries... pass_all |
|---|
| 1670 | checking how to run the C preprocessor... /usr/bin/gcc-4.2 -E |
|---|
| 1671 | checking for ANSI C header files... yes |
|---|
| 1672 | checking for sys/types.h... yes |
|---|
| 1673 | checking for sys/stat.h... yes |
|---|
| 1674 | checking for stdlib.h... yes |
|---|
| 1675 | checking for string.h... yes |
|---|
| 1676 | checking for memory.h... yes |
|---|
| 1677 | checking for strings.h... yes |
|---|
| 1678 | checking for inttypes.h... yes |
|---|
| 1679 | checking for stdint.h... yes |
|---|
| 1680 | checking for unistd.h... yes |
|---|
| 1681 | checking dlfcn.h usability... yes |
|---|
| 1682 | checking dlfcn.h presence... yes |
|---|
| 1683 | checking for dlfcn.h... yes |
|---|
| 1684 | checking whether we are using the GNU C++ compiler... yes |
|---|
| 1685 | checking whether /usr/bin/g++-4.2 accepts -g... yes |
|---|
| 1686 | checking dependency style of /usr/bin/g++-4.2... none |
|---|
| 1687 | checking how to run the C++ preprocessor... /usr/bin/g++-4.2 -E |
|---|
| 1688 | checking for g77... no |
|---|
| 1689 | checking for f77... no |
|---|
| 1690 | checking for xlf... no |
|---|
| 1691 | checking for frt... no |
|---|
| 1692 | checking for pgf77... no |
|---|
| 1693 | checking for cf77... no |
|---|
| 1694 | checking for fort77... no |
|---|
| 1695 | checking for fl32... no |
|---|
| 1696 | checking for af77... no |
|---|
| 1697 | checking for f90... no |
|---|
| 1698 | checking for xlf90... no |
|---|
| 1699 | checking for pgf90... no |
|---|
| 1700 | checking for pghpf... no |
|---|
| 1701 | checking for epcf90... no |
|---|
| 1702 | checking for gfortran... no |
|---|
| 1703 | checking for g95... no |
|---|
| 1704 | checking for f95... no |
|---|
| 1705 | checking for fort... no |
|---|
| 1706 | checking for xlf95... no |
|---|
| 1707 | checking for ifort... no |
|---|
| 1708 | checking for ifc... no |
|---|
| 1709 | checking for efc... no |
|---|
| 1710 | checking for pgf95... no |
|---|
| 1711 | checking for lf95... no |
|---|
| 1712 | checking for ftn... no |
|---|
| 1713 | checking whether we are using the GNU Fortran 77 compiler... no |
|---|
| 1714 | checking whether accepts -g... no |
|---|
| 1715 | checking the maximum length of command line arguments... 196608 |
|---|
| 1716 | checking command to parse /usr/bin/nm output from /usr/bin/gcc-4.2 object... ok |
|---|
| 1717 | checking for objdir... .libs |
|---|
| 1718 | checking for ar... ar |
|---|
| 1719 | checking for ranlib... ranlib |
|---|
| 1720 | checking for strip... strip |
|---|
| 1721 | checking if /usr/bin/gcc-4.2 supports -fno-rtti -fno-exceptions... no |
|---|
| 1722 | checking for /usr/bin/gcc-4.2 option to produce PIC... -fno-common |
|---|
| 1723 | checking if /usr/bin/gcc-4.2 PIC flag -fno-common works... yes |
|---|
| 1724 | checking if /usr/bin/gcc-4.2 static flag -static works... no |
|---|
| 1725 | checking if /usr/bin/gcc-4.2 supports -c -o file.o... yes |
|---|
| 1726 | checking whether the /usr/bin/gcc-4.2 linker (/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) supports shared libraries... yes |
|---|
| 1727 | checking dynamic linker characteristics... darwin10.2.0 dyld |
|---|
| 1728 | checking how to hardcode library paths into programs... immediate |
|---|
| 1729 | checking whether stripping libraries is possible... yes |
|---|
| 1730 | checking if libtool supports shared libraries... yes |
|---|
| 1731 | checking whether to build shared libraries... yes |
|---|
| 1732 | checking whether to build static libraries... yes |
|---|
| 1733 | configure: creating libtool |
|---|
| 1734 | appending configuration tag "CXX" to libtool |
|---|
| 1735 | checking for ld used by /usr/bin/g++-4.2... /usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld |
|---|
| 1736 | checking if the linker (/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) is GNU ld... no |
|---|
| 1737 | checking whether the /usr/bin/g++-4.2 linker (/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) supports shared libraries... yes |
|---|
| 1738 | checking for /usr/bin/g++-4.2 option to produce PIC... -fno-common |
|---|
| 1739 | checking if /usr/bin/g++-4.2 PIC flag -fno-common works... yes |
|---|
| 1740 | checking if /usr/bin/g++-4.2 static flag -static works... no |
|---|
| 1741 | checking if /usr/bin/g++-4.2 supports -c -o file.o... yes |
|---|
| 1742 | checking whether the /usr/bin/g++-4.2 linker (/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) supports shared libraries... yes |
|---|
| 1743 | checking dynamic linker characteristics... darwin10.2.0 dyld |
|---|
| 1744 | checking how to hardcode library paths into programs... immediate |
|---|
| 1745 | appending configuration tag "F77" to libtool |
|---|
| 1746 | checking out linker version info 0.13.49 ... /0/13:49 (-0.so.13.0.49) |
|---|
| 1747 | creating zzip/_msvc.in via zzip/_msvc.sed of config.h.in |
|---|
| 1748 | checking whether to enable maintainer-specific portions of Makefiles... no |
|---|
| 1749 | checking our pkgconfig libname... zziplib |
|---|
| 1750 | checking our pkgconfig version... 0.13.49 |
|---|
| 1751 | checking our pkgconfig_libdir... ${libdir}/pkgconfig |
|---|
| 1752 | expanded our pkgconfig_libdir... /opt/local/lib/pkgconfig |
|---|
| 1753 | checking our pkgconfig_libfile... zziplib.pc |
|---|
| 1754 | checking our package / suffix... zziplib / |
|---|
| 1755 | checking our pkgconfig description... ZZipLib - libZ-based ZIP-access Library |
|---|
| 1756 | checking our pkgconfig requires... zzip-zlib-config |
|---|
| 1757 | checking our pkgconfig ext libs... -lzzip |
|---|
| 1758 | checking our pkgconfig cppflags... -I/opt/local/include |
|---|
| 1759 | checking our pkgconfig ldflags... -L/opt/local/lib -arch x86_64 -arch i386 |
|---|
| 1760 | generate the pkgconfig later... zzip/zziplib.pc |
|---|
| 1761 | noninstalled pkgconfig -L /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_archivers_libzzip/work/zziplib-0.13.49/Darwin_10.2.0_i386.d/zzip/.libs |
|---|
| 1762 | noninstalled pkgconfig -I /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_archivers_libzzip/work/zziplib-0.13.49/Darwin_10.2.0_i386.d/.. |
|---|
| 1763 | checking for perl5... /opt/local/bin/perl5 |
|---|
| 1764 | checking for python2.2... no |
|---|
| 1765 | checking for python2.3... no |
|---|
| 1766 | checking for python... /usr/bin/python |
|---|
| 1767 | checking for zip... /usr/bin/zip |
|---|
| 1768 | checking for xmlto... /opt/local/bin/xmlto |
|---|
| 1769 | checking for inline... inline |
|---|
| 1770 | checking for an ANSI C-conforming const... yes |
|---|
| 1771 | checking for C restrict keyword... __restrict__ |
|---|
| 1772 | checking for ANSI C header files... (cached) yes |
|---|
| 1773 | checking for dirent.h that defines DIR... yes |
|---|
| 1774 | checking for library containing opendir... none required |
|---|
| 1775 | checking for stdint.h... (cached) yes |
|---|
| 1776 | checking for unistd.h... (cached) yes |
|---|
| 1777 | checking windows.h usability... no |
|---|
| 1778 | checking windows.h presence... no |
|---|
| 1779 | checking for windows.h... no |
|---|
| 1780 | checking winnt.h usability... no |
|---|
| 1781 | checking winnt.h presence... no |
|---|
| 1782 | checking for winnt.h... no |
|---|
| 1783 | checking winbase.h usability... no |
|---|
| 1784 | checking winbase.h presence... no |
|---|
| 1785 | checking for winbase.h... no |
|---|
| 1786 | checking sys/int_types.h usability... no |
|---|
| 1787 | checking sys/int_types.h presence... no |
|---|
| 1788 | checking for sys/int_types.h... no |
|---|
| 1789 | checking for sys/types.h... (cached) yes |
|---|
| 1790 | checking sys/mman.h usability... yes |
|---|
| 1791 | checking sys/mman.h presence... yes |
|---|
| 1792 | checking for sys/mman.h... yes |
|---|
| 1793 | checking for sys/stat.h... (cached) yes |
|---|
| 1794 | checking sys/param.h usability... yes |
|---|
| 1795 | checking sys/param.h presence... yes |
|---|
| 1796 | checking for sys/param.h... yes |
|---|
| 1797 | checking io.h usability... no |
|---|
| 1798 | checking io.h presence... no |
|---|
| 1799 | checking for io.h... no |
|---|
| 1800 | checking direct.h usability... no |
|---|
| 1801 | checking direct.h presence... no |
|---|
| 1802 | checking for direct.h... no |
|---|
| 1803 | checking zlib.h usability... yes |
|---|
| 1804 | checking zlib.h presence... yes |
|---|
| 1805 | checking for zlib.h... yes |
|---|
| 1806 | checking byteswap.h usability... no |
|---|
| 1807 | checking byteswap.h presence... no |
|---|
| 1808 | checking for byteswap.h... no |
|---|
| 1809 | checking fnmatch.h usability... yes |
|---|
| 1810 | checking fnmatch.h presence... yes |
|---|
| 1811 | checking for fnmatch.h... yes |
|---|
| 1812 | checking for strcasecmp... yes |
|---|
| 1813 | checking for strndup... no |
|---|
| 1814 | checking for off_t... yes |
|---|
| 1815 | checking for size_t... yes |
|---|
| 1816 | checking for ssize_t... yes |
|---|
| 1817 | checking for off64_t... no |
|---|
| 1818 | checking for __int64... no |
|---|
| 1819 | checking size of short... 2 |
|---|
| 1820 | checking size of int... 4 |
|---|
| 1821 | checking size of long... configure: error: cannot determine a size for long |
|---|
| 1822 | Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_archivers_libzzip/work/zziplib-0.13.49" && ./configure --prefix=/opt/local --disable-dependency-tracking --enable-default-pkgconfigdir=/opt/local/lib/pkgconfig " returned error 1 |
|---|
| 1823 | DEBUG: Backtrace: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_archivers_libzzip/work/zziplib-0.13.49" && ./configure --prefix=/opt/local --disable-dependency-tracking --enable-default-pkgconfigdir=/opt/local/lib/pkgconfig " returned error 1 |
|---|
| 1824 | while executing |
|---|
| 1825 | "$procedure $targetname" |
|---|
| 1826 | Warning: the following items did not execute (for libzzip): org.macports.activate org.macports.configure org.macports.build org.macports.destroot org.macports.install |
|---|
| 1827 | Error: Status 1 encountered during processing. |
|---|
| 1828 | To report a bug, see <http://guide.macports.org/#project.tickets> |
|---|
