| 1 | version:1 |
|---|
| 2 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 3 | :debug:main pkgconfig 0.26_0 exists in the ports tree |
|---|
| 4 | :debug:main pkgconfig 0.26_0 is the latest installed |
|---|
| 5 | :debug:main pkgconfig 0.26_0 is active |
|---|
| 6 | :debug:main Merging existing variants '' into variants |
|---|
| 7 | :debug:main new fully merged portvariants: ipv6 + osd + aa + mencoder_extras + |
|---|
| 8 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/pkgconfig |
|---|
| 9 | :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 |
|---|
| 10 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 11 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 12 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 13 | :debug:main adding the default universal variant |
|---|
| 14 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 15 | :debug:main Requested variant ipv6 is not provided by port pkgconfig. |
|---|
| 16 | :debug:main Requested variant aa is not provided by port pkgconfig. |
|---|
| 17 | :debug:main Requested variant osd is not provided by port pkgconfig. |
|---|
| 18 | :debug:main Requested variant mencoder_extras is not provided by port pkgconfig. |
|---|
| 19 | :debug:main No need to upgrade! pkgconfig 0.26_0 >= pkgconfig 0.26_0 |
|---|
| 20 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 21 | :debug:main glib2 2.28.8_0 exists in the ports tree |
|---|
| 22 | :debug:main glib2 2.28.8_0 is the latest installed |
|---|
| 23 | :debug:main glib2 2.28.8_0 is active |
|---|
| 24 | :debug:main Merging existing variants '' into variants |
|---|
| 25 | :debug:main new fully merged portvariants: ipv6 + osd + aa + mencoder_extras + |
|---|
| 26 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/glib2 |
|---|
| 27 | :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 |
|---|
| 28 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 29 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 30 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 31 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 32 | :debug:main adding the default universal variant |
|---|
| 33 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 34 | :debug:main Requested variant ipv6 is not provided by port glib2. |
|---|
| 35 | :debug:main Requested variant aa is not provided by port glib2. |
|---|
| 36 | :debug:main Requested variant osd is not provided by port glib2. |
|---|
| 37 | :debug:main Requested variant mencoder_extras is not provided by port glib2. |
|---|
| 38 | :debug:main No need to upgrade! glib2 2.28.8_0 >= glib2 2.28.8_0 |
|---|
| 39 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 40 | :debug:main gettext 0.18.1.1_2 exists in the ports tree |
|---|
| 41 | :debug:main gettext 0.18.1.1_2 is the latest installed |
|---|
| 42 | :debug:main gettext 0.18.1.1_2 is active |
|---|
| 43 | :debug:main Merging existing variants '' into variants |
|---|
| 44 | :debug:main new fully merged portvariants: ipv6 + osd + aa + mencoder_extras + |
|---|
| 45 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gettext |
|---|
| 46 | :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 |
|---|
| 47 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 48 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 49 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 50 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 51 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 52 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 53 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 54 | :debug:main Requested variant ipv6 is not provided by port gettext. |
|---|
| 55 | :debug:main Requested variant aa is not provided by port gettext. |
|---|
| 56 | :debug:main Requested variant osd is not provided by port gettext. |
|---|
| 57 | :debug:main Requested variant mencoder_extras is not provided by port gettext. |
|---|
| 58 | :debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2 |
|---|
| 59 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 60 | :debug:main libiconv 1.14_0 exists in the ports tree |
|---|
| 61 | :debug:main libiconv 1.14_0 is the latest installed |
|---|
| 62 | :debug:main libiconv 1.14_0 is active |
|---|
| 63 | :debug:main Merging existing variants '' into variants |
|---|
| 64 | :debug:main new fully merged portvariants: ipv6 + osd + aa + mencoder_extras + |
|---|
| 65 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libiconv |
|---|
| 66 | :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 |
|---|
| 67 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 68 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 69 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 70 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 71 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 72 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 73 | :debug:main Requested variant ipv6 is not provided by port libiconv. |
|---|
| 74 | :debug:main Requested variant aa is not provided by port libiconv. |
|---|
| 75 | :debug:main Requested variant osd is not provided by port libiconv. |
|---|
| 76 | :debug:main Requested variant mencoder_extras is not provided by port libiconv. |
|---|
| 77 | :debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0 |
|---|
| 78 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 79 | :debug:main ncurses 5.9_1 exists in the ports tree |
|---|
| 80 | :debug:main ncurses 5.9_1 is the latest installed |
|---|
| 81 | :debug:main ncurses 5.9_1 is active |
|---|
| 82 | :debug:main Merging existing variants '' into variants |
|---|
| 83 | :debug:main new fully merged portvariants: ipv6 + osd + aa + mencoder_extras + |
|---|
| 84 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/ncurses |
|---|
| 85 | :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 |
|---|
| 86 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 87 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 88 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 89 | :debug:main adding the default universal variant |
|---|
| 90 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 91 | :debug:main Requested variant ipv6 is not provided by port ncurses. |
|---|
| 92 | :debug:main Requested variant aa is not provided by port ncurses. |
|---|
| 93 | :debug:main Requested variant osd is not provided by port ncurses. |
|---|
| 94 | :debug:main Requested variant mencoder_extras is not provided by port ncurses. |
|---|
| 95 | :debug:main No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1 |
|---|
| 96 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 97 | :debug:main expat 2.0.1_1 exists in the ports tree |
|---|
| 98 | :debug:main expat 2.0.1_1 is the latest installed |
|---|
| 99 | :debug:main expat 2.0.1_1 is active |
|---|
| 100 | :debug:main Merging existing variants '' into variants |
|---|
| 101 | :debug:main new fully merged portvariants: ipv6 + osd + aa + mencoder_extras + |
|---|
| 102 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/expat |
|---|
| 103 | :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 |
|---|
| 104 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 105 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 106 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 107 | :debug:main adding the default universal variant |
|---|
| 108 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 109 | :debug:main Requested variant ipv6 is not provided by port expat. |
|---|
| 110 | :debug:main Requested variant aa is not provided by port expat. |
|---|
| 111 | :debug:main Requested variant osd is not provided by port expat. |
|---|
| 112 | :debug:main Requested variant mencoder_extras is not provided by port expat. |
|---|
| 113 | :debug:main No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1 |
|---|
| 114 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 115 | :debug:main zlib 1.2.5_0 exists in the ports tree |
|---|
| 116 | :debug:main zlib 1.2.5_0 is the latest installed |
|---|
| 117 | :debug:main zlib 1.2.5_0 is active |
|---|
| 118 | :debug:main Merging existing variants '' into variants |
|---|
| 119 | :debug:main new fully merged portvariants: ipv6 + osd + aa + mencoder_extras + |
|---|
| 120 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/zlib |
|---|
| 121 | :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 |
|---|
| 122 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 123 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 124 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 125 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl |
|---|
| 126 | :debug:main adding the default universal variant |
|---|
| 127 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 128 | :debug:main Requested variant ipv6 is not provided by port zlib. |
|---|
| 129 | :debug:main Requested variant aa is not provided by port zlib. |
|---|
| 130 | :debug:main Requested variant osd is not provided by port zlib. |
|---|
| 131 | :debug:main Requested variant mencoder_extras is not provided by port zlib. |
|---|
| 132 | :debug:main No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0 |
|---|
| 133 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 134 | :debug:main perl5 5.12.3_1 exists in the ports tree |
|---|
| 135 | :debug:main perl5 5.12.3_1 +perl5_12 is the latest installed |
|---|
| 136 | :debug:main perl5 5.12.3_1 +perl5_12 is active |
|---|
| 137 | :debug:main Merging existing variants '+perl5_12' into variants |
|---|
| 138 | :debug:main new fully merged portvariants: ipv6 + osd + aa + perl5_12 + mencoder_extras + |
|---|
| 139 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5 |
|---|
| 140 | :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 |
|---|
| 141 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 142 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 143 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 144 | :debug:main universal_variant is false, so not adding the default universal variant |
|---|
| 145 | :debug:main Requested variant ipv6 is not provided by port perl5. |
|---|
| 146 | :debug:main Requested variant aa is not provided by port perl5. |
|---|
| 147 | :debug:main Requested variant osd is not provided by port perl5. |
|---|
| 148 | :debug:main Requested variant mencoder_extras is not provided by port perl5. |
|---|
| 149 | :debug:main Executing variant perl5_12 provides perl5_12 |
|---|
| 150 | :debug:main No need to upgrade! perl5 5.12.3_1 >= perl5 5.12.3_1 |
|---|
| 151 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 152 | :debug:main perl5.12 5.12.3_2 exists in the ports tree |
|---|
| 153 | :debug:main perl5.12 5.12.3_2 is the latest installed |
|---|
| 154 | :debug:main perl5.12 5.12.3_2 is active |
|---|
| 155 | :debug:main Merging existing variants '' into variants |
|---|
| 156 | :debug:main new fully merged portvariants: ipv6 + osd + aa + mencoder_extras + |
|---|
| 157 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5.12 |
|---|
| 158 | :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 |
|---|
| 159 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 160 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 161 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 162 | :debug:main adding the default universal variant |
|---|
| 163 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 164 | :debug:main Requested variant ipv6 is not provided by port perl5.12. |
|---|
| 165 | :debug:main Requested variant aa is not provided by port perl5.12. |
|---|
| 166 | :debug:main Requested variant osd is not provided by port perl5.12. |
|---|
| 167 | :debug:main Requested variant mencoder_extras is not provided by port perl5.12. |
|---|
| 168 | :debug:main No need to upgrade! perl5.12 5.12.3_2 >= perl5.12 5.12.3_2 |
|---|
| 169 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 170 | :debug:main gdbm 1.9.1_0 exists in the ports tree |
|---|
| 171 | :debug:main gdbm 1.9.1_0 is the latest installed |
|---|
| 172 | :debug:main gdbm 1.9.1_0 is active |
|---|
| 173 | :debug:main Merging existing variants '' into variants |
|---|
| 174 | :debug:main new fully merged portvariants: ipv6 + osd + aa + mencoder_extras + |
|---|
| 175 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/gdbm |
|---|
| 176 | :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 |
|---|
| 177 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 178 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 179 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 180 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 181 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 182 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 183 | :debug:main Requested variant ipv6 is not provided by port gdbm. |
|---|
| 184 | :debug:main Requested variant aa is not provided by port gdbm. |
|---|
| 185 | :debug:main Requested variant osd is not provided by port gdbm. |
|---|
| 186 | :debug:main Requested variant mencoder_extras is not provided by port gdbm. |
|---|
| 187 | :debug:main No need to upgrade! gdbm 1.9.1_0 >= gdbm 1.9.1_0 |
|---|
| 188 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 189 | :debug:main libsigcxx2 2.2.10_0 exists in the ports tree |
|---|
| 190 | :debug:main libsigcxx2 2.2.10_0 is the latest installed |
|---|
| 191 | :debug:main libsigcxx2 2.2.10_0 is active |
|---|
| 192 | :debug:main Merging existing variants '' into variants |
|---|
| 193 | :debug:main new fully merged portvariants: ipv6 + osd + aa + mencoder_extras + |
|---|
| 194 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libsigcxx2 |
|---|
| 195 | :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 |
|---|
| 196 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 197 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 198 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 199 | :debug:main adding the default universal variant |
|---|
| 200 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 201 | :debug:main Requested variant ipv6 is not provided by port libsigcxx2. |
|---|
| 202 | :debug:main Requested variant aa is not provided by port libsigcxx2. |
|---|
| 203 | :debug:main Requested variant osd is not provided by port libsigcxx2. |
|---|
| 204 | :debug:main Requested variant mencoder_extras is not provided by port libsigcxx2. |
|---|
| 205 | :debug:main No need to upgrade! libsigcxx2 2.2.10_0 >= libsigcxx2 2.2.10_0 |
|---|
| 206 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 207 | :debug:main gnutls 2.12.11_1 exists in the ports tree |
|---|
| 208 | :debug:main gnutls 2.12.11_1 is the latest installed |
|---|
| 209 | :debug:main gnutls 2.12.11_1 is active |
|---|
| 210 | :debug:main Merging existing variants '' into variants |
|---|
| 211 | :debug:main new fully merged portvariants: ipv6 + osd + aa + mencoder_extras + |
|---|
| 212 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gnutls |
|---|
| 213 | :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 |
|---|
| 214 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 215 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 216 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 217 | :debug:main adding the default universal variant |
|---|
| 218 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 219 | :debug:main Requested variant ipv6 is not provided by port gnutls. |
|---|
| 220 | :debug:main Requested variant aa is not provided by port gnutls. |
|---|
| 221 | :debug:main Requested variant osd is not provided by port gnutls. |
|---|
| 222 | :debug:main Requested variant mencoder_extras is not provided by port gnutls. |
|---|
| 223 | :debug:main No need to upgrade! gnutls 2.12.11_1 >= gnutls 2.12.11_1 |
|---|
| 224 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 225 | :debug:main libgcrypt 1.5.0_0 exists in the ports tree |
|---|
| 226 | :debug:main libgcrypt 1.5.0_0 is the latest installed |
|---|
| 227 | :debug:main libgcrypt 1.5.0_0 is active |
|---|
| 228 | :debug:main Merging existing variants '' into variants |
|---|
| 229 | :debug:main new fully merged portvariants: ipv6 + osd + aa + mencoder_extras + |
|---|
| 230 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libgcrypt |
|---|
| 231 | :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 |
|---|
| 232 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 233 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 234 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 235 | :debug:main adding the default universal variant |
|---|
| 236 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 237 | :debug:main Requested variant ipv6 is not provided by port libgcrypt. |
|---|
| 238 | :debug:main Requested variant aa is not provided by port libgcrypt. |
|---|
| 239 | :debug:main Requested variant osd is not provided by port libgcrypt. |
|---|
| 240 | :debug:main Requested variant mencoder_extras is not provided by port libgcrypt. |
|---|
| 241 | :debug:main No need to upgrade! libgcrypt 1.5.0_0 >= libgcrypt 1.5.0_0 |
|---|
| 242 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 243 | :debug:main libgpg-error 1.10_0 exists in the ports tree |
|---|
| 244 | :debug:main libgpg-error 1.10_0 is the latest installed |
|---|
| 245 | :debug:main libgpg-error 1.10_0 is active |
|---|
| 246 | :debug:main Merging existing variants '' into variants |
|---|
| 247 | :debug:main new fully merged portvariants: ipv6 + osd + aa + mencoder_extras + |
|---|
| 248 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libgpg-error |
|---|
| 249 | :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 |
|---|
| 250 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 251 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 252 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 253 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 254 | :debug:main adding the default universal variant |
|---|
| 255 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 256 | :debug:main Requested variant ipv6 is not provided by port libgpg-error. |
|---|
| 257 | :debug:main Requested variant aa is not provided by port libgpg-error. |
|---|
| 258 | :debug:main Requested variant osd is not provided by port libgpg-error. |
|---|
| 259 | :debug:main Requested variant mencoder_extras is not provided by port libgpg-error. |
|---|
| 260 | :debug:main No need to upgrade! libgpg-error 1.10_0 >= libgpg-error 1.10_0 |
|---|
| 261 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 262 | :debug:main libtasn1 2.9_0 exists in the ports tree |
|---|
| 263 | :debug:main libtasn1 2.9_0 is the latest installed |
|---|
| 264 | :debug:main libtasn1 2.9_0 is active |
|---|
| 265 | :debug:main Merging existing variants '' into variants |
|---|
| 266 | :debug:main new fully merged portvariants: ipv6 + osd + aa + mencoder_extras + |
|---|
| 267 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libtasn1 |
|---|
| 268 | :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 |
|---|
| 269 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 270 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 271 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 272 | :debug:main adding the default universal variant |
|---|
| 273 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 274 | :debug:main Requested variant ipv6 is not provided by port libtasn1. |
|---|
| 275 | :debug:main Requested variant aa is not provided by port libtasn1. |
|---|
| 276 | :debug:main Requested variant osd is not provided by port libtasn1. |
|---|
| 277 | :debug:main Requested variant mencoder_extras is not provided by port libtasn1. |
|---|
| 278 | :debug:main No need to upgrade! libtasn1 2.9_0 >= libtasn1 2.9_0 |
|---|
| 279 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 280 | :debug:main lzo2 2.05_1 exists in the ports tree |
|---|
| 281 | :debug:main lzo2 2.05_1 is the latest installed |
|---|
| 282 | :debug:main lzo2 2.05_1 is active |
|---|
| 283 | :debug:main Merging existing variants '' into variants |
|---|
| 284 | :debug:main new fully merged portvariants: ipv6 + osd + aa + mencoder_extras + |
|---|
| 285 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/lzo2 |
|---|
| 286 | :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 |
|---|
| 287 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 288 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 289 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 290 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 291 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 292 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 293 | :debug:main Requested variant ipv6 is not provided by port lzo2. |
|---|
| 294 | :debug:main Requested variant aa is not provided by port lzo2. |
|---|
| 295 | :debug:main Requested variant osd is not provided by port lzo2. |
|---|
| 296 | :debug:main Requested variant mencoder_extras is not provided by port lzo2. |
|---|
| 297 | :debug:main No need to upgrade! lzo2 2.05_1 >= lzo2 2.05_1 |
|---|
| 298 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 299 | :debug:main readline 6.2.000_0 exists in the ports tree |
|---|
| 300 | :debug:main readline 6.2.000_0 is the latest installed |
|---|
| 301 | :debug:main readline 6.2.000_0 is active |
|---|
| 302 | :debug:main Merging existing variants '' into variants |
|---|
| 303 | :debug:main new fully merged portvariants: ipv6 + osd + aa + mencoder_extras + |
|---|
| 304 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/readline |
|---|
| 305 | :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 |
|---|
| 306 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 307 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 308 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 309 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 310 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 311 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 312 | :debug:main Requested variant ipv6 is not provided by port readline. |
|---|
| 313 | :debug:main Requested variant aa is not provided by port readline. |
|---|
| 314 | :debug:main Requested variant osd is not provided by port readline. |
|---|
| 315 | :debug:main Requested variant mencoder_extras is not provided by port readline. |
|---|
| 316 | :debug:main No need to upgrade! readline 6.2.000_0 >= readline 6.2.000_0 |
|---|
| 317 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 318 | :debug:main libpar2 0.2_0 exists in the ports tree |
|---|
| 319 | :debug:main libpar2 0.2_0 is the latest installed |
|---|
| 320 | :debug:main libpar2 0.2_0 is active |
|---|
| 321 | :debug:main Merging existing variants '' into variants |
|---|
| 322 | :debug:main new fully merged portvariants: ipv6 + osd + aa + mencoder_extras + |
|---|
| 323 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/libpar2 |
|---|
| 324 | :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 |
|---|
| 325 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 326 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 327 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 328 | :debug:main adding the default universal variant |
|---|
| 329 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 330 | :debug:main Requested variant ipv6 is not provided by port libpar2. |
|---|
| 331 | :debug:main Requested variant aa is not provided by port libpar2. |
|---|
| 332 | :debug:main Requested variant osd is not provided by port libpar2. |
|---|
| 333 | :debug:main Requested variant mencoder_extras is not provided by port libpar2. |
|---|
| 334 | :debug:main No need to upgrade! libpar2 0.2_0 >= libpar2 0.2_0 |
|---|
| 335 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 336 | :debug:main libxml2 2.7.8_0 exists in the ports tree |
|---|
| 337 | :debug:main libxml2 2.7.8_0 is the latest installed |
|---|
| 338 | :debug:main libxml2 2.7.8_0 is active |
|---|
| 339 | :debug:main Merging existing variants '' into variants |
|---|
| 340 | :debug:main new fully merged portvariants: ipv6 + osd + aa + mencoder_extras + |
|---|
| 341 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libxml2 |
|---|
| 342 | :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 |
|---|
| 343 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 344 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 345 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 346 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 347 | :debug:main adding the default universal variant |
|---|
| 348 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 349 | :debug:main Requested variant ipv6 is not provided by port libxml2. |
|---|
| 350 | :debug:main Requested variant aa is not provided by port libxml2. |
|---|
| 351 | :debug:main Requested variant osd is not provided by port libxml2. |
|---|
| 352 | :debug:main Requested variant mencoder_extras is not provided by port libxml2. |
|---|
| 353 | :debug:main No need to upgrade! libxml2 2.7.8_0 >= libxml2 2.7.8_0 |
|---|
| 354 | :msg:main ---> Computing dependencies for nzbget:info:main .:debug:main Searching for dependency: pkgconfig |
|---|
| 355 | :debug:main Found Dependency: receipt exists for pkgconfig |
|---|
| 356 | :debug:main Searching for dependency: libsigcxx2 |
|---|
| 357 | :debug:main Found Dependency: receipt exists for libsigcxx2 |
|---|
| 358 | :debug:main Searching for dependency: gnutls |
|---|
| 359 | :debug:main Found Dependency: receipt exists for gnutls |
|---|
| 360 | :debug:main Searching for dependency: libpar2 |
|---|
| 361 | :debug:main Found Dependency: receipt exists for libpar2 |
|---|
| 362 | :debug:main Searching for dependency: libxml2 |
|---|
| 363 | :debug:main Found Dependency: receipt exists for libxml2 |
|---|
| 364 | :msg:main |
|---|
| 365 | :debug:main Executing org.macports.main (nzbget) |
|---|
| 366 | :debug:main changing euid/egid - current euid: 0 - current egid: 0 |
|---|
| 367 | :debug:main egid changed to: 501 |
|---|
| 368 | :debug:main euid changed to: 502 |
|---|
| 369 | :debug:archivefetch archivefetch phase started at Thu Oct 27 15:54:27 CEST 2011 |
|---|
| 370 | :msg:archivefetch ---> Fetching archive for nzbget |
|---|
| 371 | :debug:archivefetch Executing org.macports.archivefetch (nzbget) |
|---|
| 372 | :debug:archivefetch euid/egid changed to: 0/0 |
|---|
| 373 | :debug:archivefetch chowned /opt/local/var/macports/software/nzbget to macports |
|---|
| 374 | :debug:archivefetch euid/egid changed to: 502/501 |
|---|
| 375 | :debug:archivefetch euid/egid changed to: 0/0 |
|---|
| 376 | :debug:archivefetch chowned /opt/local/var/macports/incoming to macports |
|---|
| 377 | :debug:archivefetch euid/egid changed to: 502/501 |
|---|
| 378 | :info:archivefetch ---> nzbget-0.7.0_0.darwin_11.x86_64.tbz2 doesn't seem to exist in /opt/local/var/macports/software/nzbget |
|---|
| 379 | :msg:archivefetch ---> Attempting to fetch nzbget-0.7.0_0.darwin_11.x86_64.tbz2 from http://packages.macports.org/nzbget |
|---|
| 380 | :debug:archivefetch Fetching archive failed:: The requested URL returned error: 404 |
|---|
| 381 | :debug:archivefetch Privilege de-escalation not attempted as not running as root. |
|---|
| 382 | :debug:fetch fetch phase started at Thu Oct 27 15:54:28 CEST 2011 |
|---|
| 383 | :notice:fetch ---> Fetching nzbget |
|---|
| 384 | :debug:fetch euid/egid changed to: 0/0 |
|---|
| 385 | :debug:fetch chowned /opt/local/var/macports/distfiles/nzbget to macports |
|---|
| 386 | :debug:fetch euid/egid changed to: 502/501 |
|---|
| 387 | :debug:fetch Executing org.macports.fetch (nzbget) |
|---|
| 388 | :debug:fetch Privilege de-escalation not attempted as not running as root. |
|---|
| 389 | :debug:checksum checksum phase started at Thu Oct 27 15:54:28 CEST 2011 |
|---|
| 390 | :notice:checksum ---> Verifying checksum(s) for nzbget |
|---|
| 391 | :debug:checksum Executing org.macports.checksum (nzbget) |
|---|
| 392 | :info:checksum ---> Checksumming nzbget-0.7.0.tar.gz |
|---|
| 393 | :debug:checksum Correct (md5) checksum for nzbget-0.7.0.tar.gz |
|---|
| 394 | :debug:checksum Correct (sha1) checksum for nzbget-0.7.0.tar.gz |
|---|
| 395 | :debug:checksum Correct (rmd160) checksum for nzbget-0.7.0.tar.gz |
|---|
| 396 | :debug:checksum Privilege de-escalation not attempted as not running as root. |
|---|
| 397 | :debug:extract extract phase started at Thu Oct 27 15:54:28 CEST 2011 |
|---|
| 398 | :notice:extract ---> Extracting nzbget |
|---|
| 399 | :debug:extract Executing org.macports.extract (nzbget) |
|---|
| 400 | :info:extract ---> Extracting nzbget-0.7.0.tar.gz |
|---|
| 401 | :debug:extract setting option extract.args to '/opt/local/var/macports/distfiles/nzbget/nzbget-0.7.0.tar.gz' |
|---|
| 402 | :debug:extract Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_nzbget/nzbget/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.7' |
|---|
| 403 | :debug:extract Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_nzbget/nzbget/work" && /usr/bin/gzip -dc '/opt/local/var/macports/distfiles/nzbget/nzbget-0.7.0.tar.gz' | /usr/bin/gnutar --no-same-owner -xf -' |
|---|
| 404 | :debug:extract Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_nzbget/nzbget/work" && /usr/bin/gzip -dc '/opt/local/var/macports/distfiles/nzbget/nzbget-0.7.0.tar.gz' | /usr/bin/gnutar --no-same-owner -xf - |
|---|
| 405 | :debug:extract euid/egid changed to: 0/0 |
|---|
| 406 | :debug:extract chowned /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_nzbget/nzbget/work to macports |
|---|
| 407 | :debug:extract euid/egid changed to: 502/501 |
|---|
| 408 | :debug:extract Privilege de-escalation not attempted as not running as root. |
|---|
| 409 | :debug:patch patch phase started at Thu Oct 27 15:54:28 CEST 2011 |
|---|
| 410 | :debug:patch Executing org.macports.patch (nzbget) |
|---|
| 411 | :debug:patch Privilege de-escalation not attempted as not running as root. |
|---|
| 412 | :debug:configure configure phase started at Thu Oct 27 15:54:28 CEST 2011 |
|---|
| 413 | :notice:configure ---> Configuring nzbget |
|---|
| 414 | :debug:configure Using compiler 'Mac OS X clang' |
|---|
| 415 | :debug:configure Executing org.macports.configure (nzbget) |
|---|
| 416 | :debug:configure Environment: CPATH='/opt/local/include' CFLAGS='-pipe -O2 -arch x86_64' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-pipe -O2 -arch x86_64' LIBRARY_PATH='/opt/local/lib' MACOSX_DEPLOYMENT_TARGET='10.7' CXX='/Developer/usr/bin/clang++' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_nzbget/nzbget/work/.CC_PRINT_OPTIONS' F90FLAGS='-pipe -O2 -m64' LDFLAGS='-L/opt/local/lib -arch x86_64' OBJC='/Developer/usr/bin/clang' FCFLAGS='-pipe -O2 -m64' INSTALL='/usr/bin/install -c' OBJCFLAGS='-pipe -O2 -arch x86_64' FFLAGS='-pipe -O2 -m64' CC_PRINT_OPTIONS='YES' CC='/Developer/usr/bin/clang' |
|---|
| 417 | :debug:configure Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_nzbget/nzbget/work/nzbget-0.7.0" && ./configure --prefix=/opt/local --with-tlslib=GnuTLS --with-libgnutls-includes=/opt/local/include/gnutls --with-libgnutls-libraries=/opt/local/lib --mandir=/opt/local/share/man' |
|---|
| 418 | :debug:configure Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_nzbget/nzbget/work/nzbget-0.7.0" && ./configure --prefix=/opt/local --with-tlslib=GnuTLS --with-libgnutls-includes=/opt/local/include/gnutls --with-libgnutls-libraries=/opt/local/lib --mandir=/opt/local/share/man |
|---|
| 419 | :info:configure checking for a BSD-compatible install... /usr/bin/install -c |
|---|
| 420 | :info:configure checking whether build environment is sane... yes |
|---|
| 421 | :info:configure checking for gawk... no |
|---|
| 422 | :info:configure checking for mawk... no |
|---|
| 423 | :info:configure checking for nawk... no |
|---|
| 424 | :info:configure checking for awk... awk |
|---|
| 425 | :info:configure checking whether make sets $(MAKE)... yes |
|---|
| 426 | :info:configure checking build system type... i386-apple-darwin11.2.0 |
|---|
| 427 | :info:configure checking host system type... i386-apple-darwin11.2.0 |
|---|
| 428 | :info:configure checking for C++ compiler default output file name... a.out |
|---|
| 429 | :info:configure checking whether the C++ compiler works... yes |
|---|
| 430 | :info:configure checking whether we are cross compiling... no |
|---|
| 431 | :info:configure checking for suffix of executables... |
|---|
| 432 | :info:configure checking for suffix of object files... o |
|---|
| 433 | :info:configure checking whether we are using the GNU C++ compiler... yes |
|---|
| 434 | :info:configure checking whether /Developer/usr/bin/clang++ accepts -g... yes |
|---|
| 435 | :info:configure checking for style of include used by make... GNU |
|---|
| 436 | :info:configure checking dependency style of /Developer/usr/bin/clang++... gcc3 |
|---|
| 437 | :info:configure checking for tar... /usr/bin/tar |
|---|
| 438 | :info:configure checking for make... /usr/bin/make |
|---|
| 439 | :info:configure checking for a BSD-compatible install... /usr/bin/install -c |
|---|
| 440 | :info:configure checking how to run the C++ preprocessor... /Developer/usr/bin/clang++ -E |
|---|
| 441 | :info:configure checking for grep that handles long lines and -e... /usr/bin/grep |
|---|
| 442 | :info:configure checking for egrep... /usr/bin/grep -E |
|---|
| 443 | :info:configure checking for ANSI C header files... yes |
|---|
| 444 | :info:configure checking for sys/types.h... yes |
|---|
| 445 | :info:configure checking for sys/stat.h... yes |
|---|
| 446 | :info:configure checking for stdlib.h... yes |
|---|
| 447 | :info:configure checking for string.h... yes |
|---|
| 448 | :info:configure checking for memory.h... yes |
|---|
| 449 | :info:configure checking for strings.h... yes |
|---|
| 450 | :info:configure checking for inttypes.h... yes |
|---|
| 451 | :info:configure checking for stdint.h... yes |
|---|
| 452 | :info:configure checking for unistd.h... yes |
|---|
| 453 | :info:configure checking sys/prctl.h usability... no |
|---|
| 454 | :info:configure checking sys/prctl.h presence... no |
|---|
| 455 | :info:configure checking for sys/prctl.h... no |
|---|
| 456 | :info:configure checking for library containing pthread_create... none required |
|---|
| 457 | :info:configure checking for library containing socket... none required |
|---|
| 458 | :info:configure checking for library containing inet_addr... none required |
|---|
| 459 | :info:configure checking for library containing hstrerror... none required |
|---|
| 460 | :info:configure checking for getopt_long... yes |
|---|
| 461 | :info:configure checking for stat64... yes |
|---|
| 462 | :info:configure checking for ctime_r... yes, and it takes 2 arguments |
|---|
| 463 | :info:configure checking for getaddrinfo... yes |
|---|
| 464 | :info:configure checking for library containing getaddrinfo... none required |
|---|
| 465 | :info:configure checking for type of socket length (socklen_t)... socklen_t |
|---|
| 466 | :info:configure checking for pkg-config... /opt/local/bin/pkg-config |
|---|
| 467 | :info:configure checking pkg-config is at least version 0.9.0... yes |
|---|
| 468 | :info:configure checking for libxml2... yes |
|---|
| 469 | :info:configure checking libxml/tree.h usability... yes |
|---|
| 470 | :info:configure checking libxml/tree.h presence... yes |
|---|
| 471 | :info:configure checking for libxml/tree.h... yes |
|---|
| 472 | :info:configure checking for library containing xmlNewNode... none required |
|---|
| 473 | :info:configure checking whether to use curses... yes |
|---|
| 474 | :info:configure checking ncurses.h usability... yes |
|---|
| 475 | :info:configure checking ncurses.h presence... yes |
|---|
| 476 | :info:configure checking for ncurses.h... yes |
|---|
| 477 | :info:configure checking for library containing refresh... -lncurses |
|---|
| 478 | :info:configure checking whether to include code for par-checking... yes |
|---|
| 479 | :info:configure checking for libsigc... yes |
|---|
| 480 | :info:configure checking sigc++/type_traits.h usability... yes |
|---|
| 481 | :info:configure checking sigc++/type_traits.h presence... yes |
|---|
| 482 | :info:configure checking for sigc++/type_traits.h... yes |
|---|
| 483 | :info:configure checking libpar2/libpar2.h usability... no |
|---|
| 484 | :info:configure checking libpar2/libpar2.h presence... yes |
|---|
| 485 | :info:configure configure: WARNING: libpar2/libpar2.h: present but cannot be compiled |
|---|
| 486 | :info:configure configure: WARNING: libpar2/libpar2.h: check for missing prerequisite headers? |
|---|
| 487 | :info:configure configure: WARNING: libpar2/libpar2.h: see the Autoconf documentation |
|---|
| 488 | :info:configure configure: WARNING: libpar2/libpar2.h: section "Present But Cannot Be Compiled" |
|---|
| 489 | :info:configure configure: WARNING: libpar2/libpar2.h: proceeding with the preprocessor's result |
|---|
| 490 | :info:configure configure: WARNING: libpar2/libpar2.h: in the future, the compiler will take precedence |
|---|
| 491 | :info:configure configure: WARNING: ## ------------------------------------------- ## |
|---|
| 492 | :info:configure configure: WARNING: ## Report this to hugbug@users.sourceforge.net ## |
|---|
| 493 | :info:configure configure: WARNING: ## ------------------------------------------- ## |
|---|
| 494 | :info:configure checking for libpar2/libpar2.h... yes |
|---|
| 495 | :info:configure checking for library containing _ZN12Par2RepairerC1Ev... -lpar2 |
|---|
| 496 | :info:configure checking for libpar2 linking... no |
|---|
| 497 | :info:configure configure: error: "libpar2 library not found" |
|---|
| 498 | :info:configure shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_nzbget/nzbget/work/nzbget-0.7.0" && ./configure --prefix=/opt/local --with-tlslib=GnuTLS --with-libgnutls-includes=/opt/local/include/gnutls --with-libgnutls-libraries=/opt/local/lib --mandir=/opt/local/share/man " returned error 1 |
|---|
| 499 | :error:configure Target org.macports.configure returned: configure failure: shell command failed (see log for details) |
|---|
| 500 | :debug:configure Backtrace: configure failure: shell command failed (see log for details) |
|---|
| 501 | while executing |
|---|
| 502 | "$procedure $targetname" |
|---|
| 503 | :info:configure Warning: the following items did not execute (for nzbget): org.macports.activate org.macports.configure org.macports.build org.macports.destroot org.macports.install |
|---|
| 504 | :notice:configure Log for nzbget is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_nzbget/nzbget/main.log |
|---|
