DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/swi-prolog DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/swi-prolog DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: adding the default universal variant DEBUG: Requested variant darwin is not provided by port swi-prolog. DEBUG: Requested variant i386 is not provided by port swi-prolog. DEBUG: Requested variant macosx is not provided by port swi-prolog. DEBUG: Executing variant mt provides mt DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline DEBUG: epoch: in tree: 0 installed: 0 DEBUG: readline 6.0.000_2 exists in the ports tree DEBUG: readline 6.0.000_2 +darwin is the latest installed DEBUG: readline 6.0.000_2 +darwin is active DEBUG: Merging existing variants darwin into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant i386 is not provided by port readline. DEBUG: Requested variant macosx is not provided by port readline. DEBUG: Executing variant darwin provides darwin DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses DEBUG: epoch: in tree: 0 installed: 0 DEBUG: ncurses 5.7_0 exists in the ports tree DEBUG: ncurses 5.7_0 +darwin_10+universal is the latest installed DEBUG: ncurses 5.7_0 +darwin_10+universal is active DEBUG: Merging existing variants darwin_10 universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port ncurses. DEBUG: Requested variant i386 is not provided by port ncurses. DEBUG: Requested variant macosx is not provided by port ncurses. DEBUG: Executing variant universal provides universal DEBUG: Executing variant darwin_10 provides darwin_10 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw DEBUG: epoch: in tree: 0 installed: 0 DEBUG: ncursesw 5.7_0 exists in the ports tree DEBUG: ncursesw 5.7_0 +darwin_10 is the latest installed DEBUG: ncursesw 5.7_0 +darwin_10 is active DEBUG: Merging existing variants darwin_10 into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port ncursesw. DEBUG: Requested variant i386 is not provided by port ncursesw. DEBUG: Requested variant macosx is not provided by port ncursesw. DEBUG: Executing variant darwin_10 provides darwin_10 DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0 DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0 DEBUG: No need to upgrade! readline 6.0.000_2 >= readline 6.0.000_2 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg DEBUG: epoch: in tree: 0 installed: 0 DEBUG: jpeg 6b_3 exists in the ports tree DEBUG: jpeg 6b_3 is the latest installed DEBUG: jpeg 6b_3 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port jpeg. DEBUG: Requested variant i386 is not provided by port jpeg. DEBUG: Requested variant macosx is not provided by port jpeg. DEBUG: No need to upgrade! jpeg 6b_3 >= jpeg 6b_3 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libmcrypt DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libmcrypt 2.5.8_1 exists in the ports tree DEBUG: libmcrypt 2.5.8_1 is the latest installed DEBUG: libmcrypt 2.5.8_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libmcrypt DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port libmcrypt. DEBUG: Requested variant i386 is not provided by port libmcrypt. DEBUG: Requested variant macosx is not provided by port libmcrypt. DEBUG: No need to upgrade! libmcrypt 2.5.8_1 >= libmcrypt 2.5.8_1 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmp DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gmp 4.3.1_1 exists in the ports tree DEBUG: gmp 4.3.1_1 is the latest installed DEBUG: gmp 4.3.1_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmp DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port gmp. DEBUG: Requested variant i386 is not provided by port gmp. DEBUG: Requested variant macosx is not provided by port gmp. DEBUG: No need to upgrade! gmp 4.3.1_1 >= gmp 4.3.1_1 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib DEBUG: epoch: in tree: 0 installed: 0 DEBUG: zlib 1.2.3_3 exists in the ports tree DEBUG: zlib 1.2.3_3 is the latest installed DEBUG: zlib 1.2.3_3 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port zlib. DEBUG: Requested variant i386 is not provided by port zlib. DEBUG: Requested variant macosx is not provided by port zlib. DEBUG: No need to upgrade! zlib 1.2.3_3 >= zlib 1.2.3_3 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libs DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libs 20090224_0 exists in the ports tree DEBUG: xorg-libs 20090224_0 is the latest installed DEBUG: xorg-libs 20090224_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libs DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-libs. DEBUG: Requested variant i386 is not provided by port xorg-libs. DEBUG: Requested variant macosx is not provided by port xorg-libs. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: Xft2 2.1.13_2 exists in the ports tree DEBUG: Xft2 2.1.13_2 is the latest installed DEBUG: Xft2 2.1.13_2 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port Xft2. DEBUG: Requested variant i386 is not provided by port Xft2. DEBUG: Requested variant macosx is not provided by port Xft2. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig DEBUG: epoch: in tree: 0 installed: 0 DEBUG: pkgconfig 0.23_1 exists in the ports tree DEBUG: pkgconfig 0.23_1 is the latest installed DEBUG: pkgconfig 0.23_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port pkgconfig. DEBUG: Requested variant i386 is not provided by port pkgconfig. DEBUG: Requested variant macosx is not provided by port pkgconfig. DEBUG: No need to upgrade! pkgconfig 0.23_1 >= pkgconfig 0.23_1 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-xproto 7.0.16_0 exists in the ports tree DEBUG: xorg-xproto 7.0.16_0 is the latest installed DEBUG: xorg-xproto 7.0.16_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-xproto. DEBUG: Requested variant i386 is not provided by port xorg-xproto. DEBUG: Requested variant macosx is not provided by port xorg-xproto. DEBUG: No need to upgrade! xorg-xproto 7.0.16_0 >= xorg-xproto 7.0.16_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xrender 0.9.5_0 exists in the ports tree DEBUG: xrender 0.9.5_0 is the latest installed DEBUG: xrender 0.9.5_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xrender. DEBUG: Requested variant i386 is not provided by port xrender. DEBUG: Requested variant macosx is not provided by port xrender. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-renderproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-renderproto 0.11_0 exists in the ports tree DEBUG: xorg-renderproto 0.11_0 is the latest installed DEBUG: xorg-renderproto 0.11_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-renderproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-renderproto. DEBUG: Requested variant i386 is not provided by port xorg-renderproto. DEBUG: Requested variant macosx is not provided by port xorg-renderproto. DEBUG: No need to upgrade! xorg-renderproto 0.11_0 >= xorg-renderproto 0.11_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libX11 1.3_0 exists in the ports tree DEBUG: xorg-libX11 1.3_0 is the latest installed DEBUG: xorg-libX11 1.3_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libX11. DEBUG: Requested variant i386 is not provided by port xorg-libX11. DEBUG: Requested variant macosx is not provided by port xorg-libX11. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-util-macros DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-util-macros 1.3.0_0 exists in the ports tree DEBUG: xorg-util-macros 1.3.0_0 is the latest installed DEBUG: xorg-util-macros 1.3.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-util-macros DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-util-macros. DEBUG: Requested variant i386 is not provided by port xorg-util-macros. DEBUG: Requested variant macosx is not provided by port xorg-util-macros. DEBUG: No need to upgrade! xorg-util-macros 1.3.0_0 >= xorg-util-macros 1.3.0_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xtrans DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-xtrans 1.2.4_0 exists in the ports tree DEBUG: xorg-xtrans 1.2.4_0 is the latest installed DEBUG: xorg-xtrans 1.2.4_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xtrans DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-xtrans. DEBUG: Requested variant i386 is not provided by port xorg-xtrans. DEBUG: Requested variant macosx is not provided by port xorg-xtrans. DEBUG: No need to upgrade! xorg-xtrans 1.2.4_0 >= xorg-xtrans 1.2.4_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-bigreqsproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-bigreqsproto 1.1.0_0 exists in the ports tree DEBUG: xorg-bigreqsproto 1.1.0_0 is the latest installed DEBUG: xorg-bigreqsproto 1.1.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-bigreqsproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-bigreqsproto. DEBUG: Requested variant i386 is not provided by port xorg-bigreqsproto. DEBUG: Requested variant macosx is not provided by port xorg-bigreqsproto. DEBUG: No need to upgrade! xorg-bigreqsproto 1.1.0_0 >= xorg-bigreqsproto 1.1.0_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcmiscproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-xcmiscproto 1.2.0_0 exists in the ports tree DEBUG: xorg-xcmiscproto 1.2.0_0 is the latest installed DEBUG: xorg-xcmiscproto 1.2.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcmiscproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-xcmiscproto. DEBUG: Requested variant i386 is not provided by port xorg-xcmiscproto. DEBUG: Requested variant macosx is not provided by port xorg-xcmiscproto. DEBUG: No need to upgrade! xorg-xcmiscproto 1.2.0_0 >= xorg-xcmiscproto 1.2.0_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-xextproto 7.1.1_0 exists in the ports tree DEBUG: xorg-xextproto 7.1.1_0 is the latest installed DEBUG: xorg-xextproto 7.1.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-xextproto. DEBUG: Requested variant i386 is not provided by port xorg-xextproto. DEBUG: Requested variant macosx is not provided by port xorg-xextproto. DEBUG: No need to upgrade! xorg-xextproto 7.1.1_0 >= xorg-xextproto 7.1.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xf86bigfontproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-xf86bigfontproto 1.2.0_0 exists in the ports tree DEBUG: xorg-xf86bigfontproto 1.2.0_0 is the latest installed DEBUG: xorg-xf86bigfontproto 1.2.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xf86bigfontproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-xf86bigfontproto. DEBUG: Requested variant i386 is not provided by port xorg-xf86bigfontproto. DEBUG: Requested variant macosx is not provided by port xorg-xf86bigfontproto. DEBUG: No need to upgrade! xorg-xf86bigfontproto 1.2.0_0 >= xorg-xf86bigfontproto 1.2.0_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-inputproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-inputproto 2.0_0 exists in the ports tree DEBUG: xorg-inputproto 2.0_0 is the latest installed DEBUG: xorg-inputproto 2.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-inputproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-inputproto. DEBUG: Requested variant i386 is not provided by port xorg-inputproto. DEBUG: Requested variant macosx is not provided by port xorg-inputproto. DEBUG: No need to upgrade! xorg-inputproto 2.0_0 >= xorg-inputproto 2.0_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-kbproto 1.0.3_0 exists in the ports tree DEBUG: xorg-kbproto 1.0.3_0 is the latest installed DEBUG: xorg-kbproto 1.0.3_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-kbproto. DEBUG: Requested variant i386 is not provided by port xorg-kbproto. DEBUG: Requested variant macosx is not provided by port xorg-kbproto. DEBUG: No need to upgrade! xorg-kbproto 1.0.3_0 >= xorg-kbproto 1.0.3_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf DEBUG: epoch: in tree: 0 installed: 0 DEBUG: autoconf 2.64_2 exists in the ports tree DEBUG: autoconf 2.64_2 is the latest installed DEBUG: autoconf 2.64_2 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port autoconf. DEBUG: Requested variant i386 is not provided by port autoconf. DEBUG: Requested variant macosx is not provided by port autoconf. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: perl5 5.8.9_0 exists in the ports tree DEBUG: perl5 5.8.9_0 is the latest installed DEBUG: perl5 5.8.9_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port perl5. DEBUG: Requested variant i386 is not provided by port perl5. DEBUG: Requested variant macosx is not provided by port perl5. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: perl5.8 5.8.9_3 exists in the ports tree DEBUG: perl5.8 5.8.9_3 is the latest installed DEBUG: perl5.8 5.8.9_3 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port perl5.8. DEBUG: Requested variant i386 is not provided by port perl5.8. DEBUG: Requested variant macosx is not provided by port perl5.8. DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3 DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: m4 1.4.13_0 exists in the ports tree DEBUG: m4 1.4.13_0 is the latest installed DEBUG: m4 1.4.13_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port m4. DEBUG: Requested variant i386 is not provided by port m4. DEBUG: Requested variant macosx is not provided by port m4. DEBUG: No need to upgrade! m4 1.4.13_0 >= m4 1.4.13_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man DEBUG: epoch: in tree: 0 installed: 0 DEBUG: help2man 1.36.4_1 exists in the ports tree DEBUG: help2man 1.36.4_1 is the latest installed DEBUG: help2man 1.36.4_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port help2man. DEBUG: Requested variant i386 is not provided by port help2man. DEBUG: Requested variant macosx is not provided by port help2man. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext DEBUG: epoch: in tree: 0 installed: 0 DEBUG: p5-locale-gettext 1.05_0 exists in the ports tree DEBUG: p5-locale-gettext 1.05_0 is the latest installed DEBUG: p5-locale-gettext 1.05_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port p5-locale-gettext. DEBUG: Requested variant i386 is not provided by port p5-locale-gettext. DEBUG: Requested variant macosx is not provided by port p5-locale-gettext. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gettext 0.17_4 exists in the ports tree DEBUG: gettext 0.17_4 is the latest installed DEBUG: gettext 0.17_4 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port gettext. DEBUG: Requested variant i386 is not provided by port gettext. DEBUG: Requested variant macosx is not provided by port gettext. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libiconv 1.13_0 exists in the ports tree DEBUG: libiconv 1.13_0 is the latest installed DEBUG: libiconv 1.13_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port libiconv. DEBUG: Requested variant i386 is not provided by port libiconv. DEBUG: Requested variant macosx is not provided by port libiconv. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gperf 3.0.4_0 exists in the ports tree DEBUG: gperf 3.0.4_0 is the latest installed DEBUG: gperf 3.0.4_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port gperf. DEBUG: Requested variant i386 is not provided by port gperf. DEBUG: Requested variant macosx is not provided by port gperf. DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0 DEBUG: No need to upgrade! libiconv 1.13_0 >= libiconv 1.13_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat DEBUG: epoch: in tree: 0 installed: 0 DEBUG: expat 2.0.1_0 exists in the ports tree DEBUG: expat 2.0.1_0 is the latest installed DEBUG: expat 2.0.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port expat. DEBUG: Requested variant i386 is not provided by port expat. DEBUG: Requested variant macosx is not provided by port expat. DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0 DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4 DEBUG: No need to upgrade! p5-locale-gettext 1.05_0 >= p5-locale-gettext 1.05_0 DEBUG: No need to upgrade! help2man 1.36.4_1 >= help2man 1.36.4_1 DEBUG: No need to upgrade! autoconf 2.64_2 >= autoconf 2.64_2 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake DEBUG: epoch: in tree: 0 installed: 0 DEBUG: automake 1.11_0 exists in the ports tree DEBUG: automake 1.11_0 is the latest installed DEBUG: automake 1.11_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port automake. DEBUG: Requested variant i386 is not provided by port automake. DEBUG: Requested variant macosx is not provided by port automake. DEBUG: No need to upgrade! automake 1.11_0 >= automake 1.11_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libtool 2.2.6a_0 exists in the ports tree DEBUG: libtool 2.2.6a_0 is the latest installed DEBUG: libtool 2.2.6a_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port libtool. DEBUG: Requested variant i386 is not provided by port libtool. DEBUG: Requested variant macosx is not provided by port libtool. DEBUG: No need to upgrade! libtool 2.2.6a_0 >= libtool 2.2.6a_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXdmcp 1.0.3_0 exists in the ports tree DEBUG: xorg-libXdmcp 1.0.3_0 is the latest installed DEBUG: xorg-libXdmcp 1.0.3_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXdmcp. DEBUG: Requested variant i386 is not provided by port xorg-libXdmcp. DEBUG: Requested variant macosx is not provided by port xorg-libXdmcp. DEBUG: No need to upgrade! xorg-libXdmcp 1.0.3_0 >= xorg-libXdmcp 1.0.3_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXau 1.0.5_0 exists in the ports tree DEBUG: xorg-libXau 1.0.5_0 is the latest installed DEBUG: xorg-libXau 1.0.5_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXau. DEBUG: Requested variant i386 is not provided by port xorg-libXau. DEBUG: Requested variant macosx is not provided by port xorg-libXau. DEBUG: No need to upgrade! xorg-libXau 1.0.5_0 >= xorg-libXau 1.0.5_0 DEBUG: No need to upgrade! xorg-libX11 1.3_0 >= xorg-libX11 1.3_0 DEBUG: No need to upgrade! xrender 0.9.5_0 >= xrender 0.9.5_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype DEBUG: epoch: in tree: 0 installed: 0 DEBUG: freetype 2.3.9_1 exists in the ports tree DEBUG: freetype 2.3.9_1 +macosx is the latest installed DEBUG: freetype 2.3.9_1 +macosx is active DEBUG: Merging existing variants macosx into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port freetype. DEBUG: Requested variant i386 is not provided by port freetype. DEBUG: Executing variant macosx provides macosx DEBUG: No need to upgrade! freetype 2.3.9_1 >= freetype 2.3.9_1 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig DEBUG: epoch: in tree: 0 installed: 0 DEBUG: fontconfig 2.7.3_0 exists in the ports tree DEBUG: fontconfig 2.7.3_0 +macosx is the latest installed DEBUG: fontconfig 2.7.3_0 +macosx is active DEBUG: Merging existing variants macosx into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port fontconfig. DEBUG: Requested variant i386 is not provided by port fontconfig. DEBUG: Executing variant macosx provides macosx DEBUG: No need to upgrade! fontconfig 2.7.3_0 >= fontconfig 2.7.3_0 DEBUG: No need to upgrade! Xft2 2.1.13_2 >= Xft2 2.1.13_2 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/mesa DEBUG: epoch: in tree: 0 installed: 0 DEBUG: mesa 7.6_0 exists in the ports tree DEBUG: mesa 7.6_0 +hw_render is the latest installed DEBUG: mesa 7.6_0 +hw_render is active DEBUG: Merging existing variants hw_render into variants DEBUG: new fully merged portvariants: hw_render + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/mesa DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port mesa. DEBUG: Requested variant i386 is not provided by port mesa. DEBUG: Requested variant macosx is not provided by port mesa. DEBUG: Executing variant hw_render provides hw_render DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/makedepend DEBUG: epoch: in tree: 0 installed: 0 DEBUG: makedepend 1.0.1_0 exists in the ports tree DEBUG: makedepend 1.0.1_0 is the latest installed DEBUG: makedepend 1.0.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/makedepend DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port makedepend. DEBUG: Requested variant i386 is not provided by port makedepend. DEBUG: Requested variant macosx is not provided by port makedepend. DEBUG: No need to upgrade! makedepend 1.0.1_0 >= makedepend 1.0.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/glut DEBUG: epoch: in tree: 0 installed: 0 DEBUG: glut 3.7_3 exists in the ports tree DEBUG: glut 3.7_3 is the latest installed DEBUG: glut 3.7_3 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/glut DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: not using configure, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port glut. DEBUG: Requested variant i386 is not provided by port glut. DEBUG: Requested variant macosx is not provided by port glut. DEBUG: No need to upgrade! glut 3.7_3 >= glut 3.7_3 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/tcl DEBUG: epoch: in tree: 0 installed: 0 DEBUG: tcl 8.5.7_0 exists in the ports tree DEBUG: tcl 8.5.7_0 +darwin is the latest installed DEBUG: tcl 8.5.7_0 +darwin is active DEBUG: Merging existing variants darwin into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/tcl DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: adding the default universal variant DEBUG: Requested variant i386 is not provided by port tcl. DEBUG: Requested variant macosx is not provided by port tcl. DEBUG: Executing variant darwin provides darwin DEBUG: No need to upgrade! tcl 8.5.7_0 >= tcl 8.5.7_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-glproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-glproto 1.4.10_0 exists in the ports tree DEBUG: xorg-glproto 1.4.10_0 is the latest installed DEBUG: xorg-glproto 1.4.10_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-glproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-glproto. DEBUG: Requested variant i386 is not provided by port xorg-glproto. DEBUG: Requested variant macosx is not provided by port xorg-glproto. DEBUG: No need to upgrade! xorg-glproto 1.4.10_0 >= xorg-glproto 1.4.10_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-dri2proto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-dri2proto 2.1_0 exists in the ports tree DEBUG: xorg-dri2proto 2.1_0 is the latest installed DEBUG: xorg-dri2proto 2.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-dri2proto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-dri2proto. DEBUG: Requested variant i386 is not provided by port xorg-dri2proto. DEBUG: Requested variant macosx is not provided by port xorg-dri2proto. DEBUG: No need to upgrade! xorg-dri2proto 2.1_0 >= xorg-dri2proto 2.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXfixes DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXfixes 4.0.3_1 exists in the ports tree DEBUG: xorg-libXfixes 4.0.3_1 is the latest installed DEBUG: xorg-libXfixes 4.0.3_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXfixes DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXfixes. DEBUG: Requested variant i386 is not provided by port xorg-libXfixes. DEBUG: Requested variant macosx is not provided by port xorg-libXfixes. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-fixesproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-fixesproto 4.1.1_0 exists in the ports tree DEBUG: xorg-fixesproto 4.1.1_0 is the latest installed DEBUG: xorg-fixesproto 4.1.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-fixesproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-fixesproto. DEBUG: Requested variant i386 is not provided by port xorg-fixesproto. DEBUG: Requested variant macosx is not provided by port xorg-fixesproto. DEBUG: No need to upgrade! xorg-fixesproto 4.1.1_0 >= xorg-fixesproto 4.1.1_0 DEBUG: No need to upgrade! xorg-libXfixes 4.0.3_1 >= xorg-libXfixes 4.0.3_1 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXi DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXi 1.3_0 exists in the ports tree DEBUG: xorg-libXi 1.3_0 is the latest installed DEBUG: xorg-libXi 1.3_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXi DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXi. DEBUG: Requested variant i386 is not provided by port xorg-libXi. DEBUG: Requested variant macosx is not provided by port xorg-libXi. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXext DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXext 1.1_0 exists in the ports tree DEBUG: xorg-libXext 1.1_0 is the latest installed DEBUG: xorg-libXext 1.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXext DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXext. DEBUG: Requested variant i386 is not provided by port xorg-libXext. DEBUG: Requested variant macosx is not provided by port xorg-libXext. DEBUG: No need to upgrade! xorg-libXext 1.1_0 >= xorg-libXext 1.1_0 DEBUG: No need to upgrade! xorg-libXi 1.3_0 >= xorg-libXi 1.3_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXmu DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXmu 1.0.5_0 exists in the ports tree DEBUG: xorg-libXmu 1.0.5_0 is the latest installed DEBUG: xorg-libXmu 1.0.5_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXmu DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXmu. DEBUG: Requested variant i386 is not provided by port xorg-libXmu. DEBUG: Requested variant macosx is not provided by port xorg-libXmu. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXt DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXt 1.0.6_0 exists in the ports tree DEBUG: xorg-libXt 1.0.6_0 is the latest installed DEBUG: xorg-libXt 1.0.6_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXt DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXt. DEBUG: Requested variant i386 is not provided by port xorg-libXt. DEBUG: Requested variant macosx is not provided by port xorg-libXt. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libsm DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libsm 1.1.1_0 exists in the ports tree DEBUG: xorg-libsm 1.1.1_0 is the latest installed DEBUG: xorg-libsm 1.1.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libsm DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libsm. DEBUG: Requested variant i386 is not provided by port xorg-libsm. DEBUG: Requested variant macosx is not provided by port xorg-libsm. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libice DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libice 1.0.6_0 exists in the ports tree DEBUG: xorg-libice 1.0.6_0 is the latest installed DEBUG: xorg-libice 1.0.6_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libice DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libice. DEBUG: Requested variant i386 is not provided by port xorg-libice. DEBUG: Requested variant macosx is not provided by port xorg-libice. DEBUG: No need to upgrade! xorg-libice 1.0.6_0 >= xorg-libice 1.0.6_0 DEBUG: No need to upgrade! xorg-libsm 1.1.1_0 >= xorg-libsm 1.1.1_0 DEBUG: No need to upgrade! xorg-libXt 1.0.6_0 >= xorg-libXt 1.0.6_0 DEBUG: No need to upgrade! xorg-libXmu 1.0.5_0 >= xorg-libXmu 1.0.5_0 DEBUG: No need to upgrade! mesa 7.6_0 >= mesa 7.6_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libAppleWM DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libAppleWM 1.4.0_0 exists in the ports tree DEBUG: xorg-libAppleWM 1.4.0_0 is the latest installed DEBUG: xorg-libAppleWM 1.4.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libAppleWM DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libAppleWM. DEBUG: Requested variant i386 is not provided by port xorg-libAppleWM. DEBUG: Requested variant macosx is not provided by port xorg-libAppleWM. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-applewmproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-applewmproto 1.4.1_0 exists in the ports tree DEBUG: xorg-applewmproto 1.4.1_0 is the latest installed DEBUG: xorg-applewmproto 1.4.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-applewmproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-applewmproto. DEBUG: Requested variant i386 is not provided by port xorg-applewmproto. DEBUG: Requested variant macosx is not provided by port xorg-applewmproto. DEBUG: No need to upgrade! xorg-applewmproto 1.4.1_0 >= xorg-applewmproto 1.4.1_0 DEBUG: No need to upgrade! xorg-libAppleWM 1.4.0_0 >= xorg-libAppleWM 1.4.0_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libFS DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libFS 1.0.2_0 exists in the ports tree DEBUG: xorg-libFS 1.0.2_0 is the latest installed DEBUG: xorg-libFS 1.0.2_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libFS DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libFS. DEBUG: Requested variant i386 is not provided by port xorg-libFS. DEBUG: Requested variant macosx is not provided by port xorg-libFS. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-fontsproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-fontsproto 2.1.0_0 exists in the ports tree DEBUG: xorg-fontsproto 2.1.0_0 is the latest installed DEBUG: xorg-fontsproto 2.1.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-fontsproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-fontsproto. DEBUG: Requested variant i386 is not provided by port xorg-fontsproto. DEBUG: Requested variant macosx is not provided by port xorg-fontsproto. DEBUG: No need to upgrade! xorg-fontsproto 2.1.0_0 >= xorg-fontsproto 2.1.0_0 DEBUG: No need to upgrade! xorg-libFS 1.0.2_0 >= xorg-libFS 1.0.2_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXScrnSaver DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXScrnSaver 1.2.0_0 exists in the ports tree DEBUG: xorg-libXScrnSaver 1.2.0_0 is the latest installed DEBUG: xorg-libXScrnSaver 1.2.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXScrnSaver DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXScrnSaver. DEBUG: Requested variant i386 is not provided by port xorg-libXScrnSaver. DEBUG: Requested variant macosx is not provided by port xorg-libXScrnSaver. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-scrnsaverproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-scrnsaverproto 1.2.0_0 exists in the ports tree DEBUG: xorg-scrnsaverproto 1.2.0_0 is the latest installed DEBUG: xorg-scrnsaverproto 1.2.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-scrnsaverproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-scrnsaverproto. DEBUG: Requested variant i386 is not provided by port xorg-scrnsaverproto. DEBUG: Requested variant macosx is not provided by port xorg-scrnsaverproto. DEBUG: No need to upgrade! xorg-scrnsaverproto 1.2.0_0 >= xorg-scrnsaverproto 1.2.0_0 DEBUG: No need to upgrade! xorg-libXScrnSaver 1.2.0_0 >= xorg-libXScrnSaver 1.2.0_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXTrap DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXTrap 1.0.0_3 exists in the ports tree DEBUG: xorg-libXTrap 1.0.0_3 is the latest installed DEBUG: xorg-libXTrap 1.0.0_3 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXTrap DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXTrap. DEBUG: Requested variant i386 is not provided by port xorg-libXTrap. DEBUG: Requested variant macosx is not provided by port xorg-libXTrap. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-trapproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-trapproto 3.4.3_0 exists in the ports tree DEBUG: xorg-trapproto 3.4.3_0 is the latest installed DEBUG: xorg-trapproto 3.4.3_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-trapproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-trapproto. DEBUG: Requested variant i386 is not provided by port xorg-trapproto. DEBUG: Requested variant macosx is not provided by port xorg-trapproto. DEBUG: No need to upgrade! xorg-trapproto 3.4.3_0 >= xorg-trapproto 3.4.3_0 DEBUG: No need to upgrade! xorg-libXTrap 1.0.0_3 >= xorg-libXTrap 1.0.0_3 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXaw DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXaw 1.0.6_0 exists in the ports tree DEBUG: xorg-libXaw 1.0.6_0 is the latest installed DEBUG: xorg-libXaw 1.0.6_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXaw DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXaw. DEBUG: Requested variant i386 is not provided by port xorg-libXaw. DEBUG: Requested variant macosx is not provided by port xorg-libXaw. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xpm DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xpm 3.5.7_1 exists in the ports tree DEBUG: xpm 3.5.7_1 is the latest installed DEBUG: xpm 3.5.7_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xpm DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xpm. DEBUG: Requested variant i386 is not provided by port xpm. DEBUG: Requested variant macosx is not provided by port xpm. DEBUG: No need to upgrade! xpm 3.5.7_1 >= xpm 3.5.7_1 DEBUG: No need to upgrade! xorg-libXaw 1.0.6_0 >= xorg-libXaw 1.0.6_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXcomposite DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXcomposite 0.4.0_1 exists in the ports tree DEBUG: xorg-libXcomposite 0.4.0_1 is the latest installed DEBUG: xorg-libXcomposite 0.4.0_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXcomposite DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXcomposite. DEBUG: Requested variant i386 is not provided by port xorg-libXcomposite. DEBUG: Requested variant macosx is not provided by port xorg-libXcomposite. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-compositeproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-compositeproto 0.4.1_0 exists in the ports tree DEBUG: xorg-compositeproto 0.4.1_0 is the latest installed DEBUG: xorg-compositeproto 0.4.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-compositeproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-compositeproto. DEBUG: Requested variant i386 is not provided by port xorg-compositeproto. DEBUG: Requested variant macosx is not provided by port xorg-compositeproto. DEBUG: No need to upgrade! xorg-compositeproto 0.4.1_0 >= xorg-compositeproto 0.4.1_0 DEBUG: No need to upgrade! xorg-libXcomposite 0.4.0_1 >= xorg-libXcomposite 0.4.0_1 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXcursor DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXcursor 1.1.10_0 exists in the ports tree DEBUG: xorg-libXcursor 1.1.10_0 is the latest installed DEBUG: xorg-libXcursor 1.1.10_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXcursor DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXcursor. DEBUG: Requested variant i386 is not provided by port xorg-libXcursor. DEBUG: Requested variant macosx is not provided by port xorg-libXcursor. DEBUG: No need to upgrade! xorg-libXcursor 1.1.10_0 >= xorg-libXcursor 1.1.10_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdamage DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXdamage 1.1.2_0 exists in the ports tree DEBUG: xorg-libXdamage 1.1.2_0 is the latest installed DEBUG: xorg-libXdamage 1.1.2_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdamage DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXdamage. DEBUG: Requested variant i386 is not provided by port xorg-libXdamage. DEBUG: Requested variant macosx is not provided by port xorg-libXdamage. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-damageproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-damageproto 1.2.0_0 exists in the ports tree DEBUG: xorg-damageproto 1.2.0_0 is the latest installed DEBUG: xorg-damageproto 1.2.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-damageproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-damageproto. DEBUG: Requested variant i386 is not provided by port xorg-damageproto. DEBUG: Requested variant macosx is not provided by port xorg-damageproto. DEBUG: No need to upgrade! xorg-damageproto 1.2.0_0 >= xorg-damageproto 1.2.0_0 DEBUG: No need to upgrade! xorg-libXdamage 1.1.2_0 >= xorg-libXdamage 1.1.2_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXevie DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXevie 1.0.2_2 exists in the ports tree DEBUG: xorg-libXevie 1.0.2_2 is the latest installed DEBUG: xorg-libXevie 1.0.2_2 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXevie DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXevie. DEBUG: Requested variant i386 is not provided by port xorg-libXevie. DEBUG: Requested variant macosx is not provided by port xorg-libXevie. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-evieproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-evieproto 1.1.0_0 exists in the ports tree DEBUG: xorg-evieproto 1.1.0_0 is the latest installed DEBUG: xorg-evieproto 1.1.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-evieproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-evieproto. DEBUG: Requested variant i386 is not provided by port xorg-evieproto. DEBUG: Requested variant macosx is not provided by port xorg-evieproto. DEBUG: No need to upgrade! xorg-evieproto 1.1.0_0 >= xorg-evieproto 1.1.0_0 DEBUG: No need to upgrade! xorg-libXevie 1.0.2_2 >= xorg-libXevie 1.0.2_2 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXfont DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXfont 1.4.0_2 exists in the ports tree DEBUG: xorg-libXfont 1.4.0_2 is the latest installed DEBUG: xorg-libXfont 1.4.0_2 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXfont DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXfont. DEBUG: Requested variant i386 is not provided by port xorg-libXfont. DEBUG: Requested variant macosx is not provided by port xorg-libXfont. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libfontenc DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libfontenc 1.0.5_0 exists in the ports tree DEBUG: xorg-libfontenc 1.0.5_0 is the latest installed DEBUG: xorg-libfontenc 1.0.5_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libfontenc DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libfontenc. DEBUG: Requested variant i386 is not provided by port xorg-libfontenc. DEBUG: Requested variant macosx is not provided by port xorg-libfontenc. DEBUG: No need to upgrade! xorg-libfontenc 1.0.5_0 >= xorg-libfontenc 1.0.5_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: bzip2 1.0.5_3 exists in the ports tree DEBUG: bzip2 1.0.5_3 +darwin is the latest installed DEBUG: bzip2 1.0.5_3 +darwin is active DEBUG: Merging existing variants darwin into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant i386 is not provided by port bzip2. DEBUG: Requested variant macosx is not provided by port bzip2. DEBUG: Executing variant darwin provides darwin DEBUG: No need to upgrade! bzip2 1.0.5_3 >= bzip2 1.0.5_3 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-fontcacheproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-fontcacheproto 0.1.3_0 exists in the ports tree DEBUG: xorg-fontcacheproto 0.1.3_0 is the latest installed DEBUG: xorg-fontcacheproto 0.1.3_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-fontcacheproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-fontcacheproto. DEBUG: Requested variant i386 is not provided by port xorg-fontcacheproto. DEBUG: Requested variant macosx is not provided by port xorg-fontcacheproto. DEBUG: No need to upgrade! xorg-fontcacheproto 0.1.3_0 >= xorg-fontcacheproto 0.1.3_0 DEBUG: No need to upgrade! xorg-libXfont 1.4.0_2 >= xorg-libXfont 1.4.0_2 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXfontcache DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXfontcache 1.0.4_1 exists in the ports tree DEBUG: xorg-libXfontcache 1.0.4_1 is the latest installed DEBUG: xorg-libXfontcache 1.0.4_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXfontcache DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXfontcache. DEBUG: Requested variant i386 is not provided by port xorg-libXfontcache. DEBUG: Requested variant macosx is not provided by port xorg-libXfontcache. DEBUG: No need to upgrade! xorg-libXfontcache 1.0.4_1 >= xorg-libXfontcache 1.0.4_1 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXinerama DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXinerama 1.1_0 exists in the ports tree DEBUG: xorg-libXinerama 1.1_0 is the latest installed DEBUG: xorg-libXinerama 1.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXinerama DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXinerama. DEBUG: Requested variant i386 is not provided by port xorg-libXinerama. DEBUG: Requested variant macosx is not provided by port xorg-libXinerama. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xineramaproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-xineramaproto 1.2_0 exists in the ports tree DEBUG: xorg-xineramaproto 1.2_0 is the latest installed DEBUG: xorg-xineramaproto 1.2_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xineramaproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-xineramaproto. DEBUG: Requested variant i386 is not provided by port xorg-xineramaproto. DEBUG: Requested variant macosx is not provided by port xorg-xineramaproto. DEBUG: No need to upgrade! xorg-xineramaproto 1.2_0 >= xorg-xineramaproto 1.2_0 DEBUG: No need to upgrade! xorg-libXinerama 1.1_0 >= xorg-libXinerama 1.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXrandr DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXrandr 1.3.0_1 exists in the ports tree DEBUG: xorg-libXrandr 1.3.0_1 is the latest installed DEBUG: xorg-libXrandr 1.3.0_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXrandr DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXrandr. DEBUG: Requested variant i386 is not provided by port xorg-libXrandr. DEBUG: Requested variant macosx is not provided by port xorg-libXrandr. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-randrproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-randrproto 1.3.1_0 exists in the ports tree DEBUG: xorg-randrproto 1.3.1_0 is the latest installed DEBUG: xorg-randrproto 1.3.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-randrproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-randrproto. DEBUG: Requested variant i386 is not provided by port xorg-randrproto. DEBUG: Requested variant macosx is not provided by port xorg-randrproto. DEBUG: No need to upgrade! xorg-randrproto 1.3.1_0 >= xorg-randrproto 1.3.1_0 DEBUG: No need to upgrade! xorg-libXrandr 1.3.0_1 >= xorg-libXrandr 1.3.0_1 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXres DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXres 1.0.3_1 exists in the ports tree DEBUG: xorg-libXres 1.0.3_1 is the latest installed DEBUG: xorg-libXres 1.0.3_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXres DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXres. DEBUG: Requested variant i386 is not provided by port xorg-libXres. DEBUG: Requested variant macosx is not provided by port xorg-libXres. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-resourceproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-resourceproto 1.1.0_0 exists in the ports tree DEBUG: xorg-resourceproto 1.1.0_0 is the latest installed DEBUG: xorg-resourceproto 1.1.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-resourceproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-resourceproto. DEBUG: Requested variant i386 is not provided by port xorg-resourceproto. DEBUG: Requested variant macosx is not provided by port xorg-resourceproto. DEBUG: No need to upgrade! xorg-resourceproto 1.1.0_0 >= xorg-resourceproto 1.1.0_0 DEBUG: No need to upgrade! xorg-libXres 1.0.3_1 >= xorg-libXres 1.0.3_1 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXtst DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXtst 1.1.0_0 exists in the ports tree DEBUG: xorg-libXtst 1.1.0_0 is the latest installed DEBUG: xorg-libXtst 1.1.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXtst DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXtst. DEBUG: Requested variant i386 is not provided by port xorg-libXtst. DEBUG: Requested variant macosx is not provided by port xorg-libXtst. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-recordproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-recordproto 1.14_0 exists in the ports tree DEBUG: xorg-recordproto 1.14_0 is the latest installed DEBUG: xorg-recordproto 1.14_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-recordproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-recordproto. DEBUG: Requested variant i386 is not provided by port xorg-recordproto. DEBUG: Requested variant macosx is not provided by port xorg-recordproto. DEBUG: No need to upgrade! xorg-recordproto 1.14_0 >= xorg-recordproto 1.14_0 DEBUG: No need to upgrade! xorg-libXtst 1.1.0_0 >= xorg-libXtst 1.1.0_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXv DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXv 1.0.5_0 exists in the ports tree DEBUG: xorg-libXv 1.0.5_0 is the latest installed DEBUG: xorg-libXv 1.0.5_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXv DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXv. DEBUG: Requested variant i386 is not provided by port xorg-libXv. DEBUG: Requested variant macosx is not provided by port xorg-libXv. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-videoproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-videoproto 2.3.0_0 exists in the ports tree DEBUG: xorg-videoproto 2.3.0_0 is the latest installed DEBUG: xorg-videoproto 2.3.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-videoproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-videoproto. DEBUG: Requested variant i386 is not provided by port xorg-videoproto. DEBUG: Requested variant macosx is not provided by port xorg-videoproto. DEBUG: No need to upgrade! xorg-videoproto 2.3.0_0 >= xorg-videoproto 2.3.0_0 DEBUG: No need to upgrade! xorg-libXv 1.0.5_0 >= xorg-libXv 1.0.5_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXvMC DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXvMC 1.0.5_0 exists in the ports tree DEBUG: xorg-libXvMC 1.0.5_0 is the latest installed DEBUG: xorg-libXvMC 1.0.5_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXvMC DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXvMC. DEBUG: Requested variant i386 is not provided by port xorg-libXvMC. DEBUG: Requested variant macosx is not provided by port xorg-libXvMC. DEBUG: No need to upgrade! xorg-libXvMC 1.0.5_0 >= xorg-libXvMC 1.0.5_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXxf86dga DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXxf86dga 1.1.1_0 exists in the ports tree DEBUG: xorg-libXxf86dga 1.1.1_0 is the latest installed DEBUG: xorg-libXxf86dga 1.1.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXxf86dga DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXxf86dga. DEBUG: Requested variant i386 is not provided by port xorg-libXxf86dga. DEBUG: Requested variant macosx is not provided by port xorg-libXxf86dga. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xf86dgaproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-xf86dgaproto 2.1_0 exists in the ports tree DEBUG: xorg-xf86dgaproto 2.1_0 is the latest installed DEBUG: xorg-xf86dgaproto 2.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xf86dgaproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-xf86dgaproto. DEBUG: Requested variant i386 is not provided by port xorg-xf86dgaproto. DEBUG: Requested variant macosx is not provided by port xorg-xf86dgaproto. DEBUG: No need to upgrade! xorg-xf86dgaproto 2.1_0 >= xorg-xf86dgaproto 2.1_0 DEBUG: No need to upgrade! xorg-libXxf86dga 1.1.1_0 >= xorg-libXxf86dga 1.1.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXxf86misc DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXxf86misc 1.0.1_2 exists in the ports tree DEBUG: xorg-libXxf86misc 1.0.1_2 is the latest installed DEBUG: xorg-libXxf86misc 1.0.1_2 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXxf86misc DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXxf86misc. DEBUG: Requested variant i386 is not provided by port xorg-libXxf86misc. DEBUG: Requested variant macosx is not provided by port xorg-libXxf86misc. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xf86miscproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-xf86miscproto 0.9.2_0 exists in the ports tree DEBUG: xorg-xf86miscproto 0.9.2_0 is the latest installed DEBUG: xorg-xf86miscproto 0.9.2_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xf86miscproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-xf86miscproto. DEBUG: Requested variant i386 is not provided by port xorg-xf86miscproto. DEBUG: Requested variant macosx is not provided by port xorg-xf86miscproto. DEBUG: No need to upgrade! xorg-xf86miscproto 0.9.2_0 >= xorg-xf86miscproto 0.9.2_0 DEBUG: No need to upgrade! xorg-libXxf86misc 1.0.1_2 >= xorg-libXxf86misc 1.0.1_2 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXxf86vm DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXxf86vm 1.1.0_0 exists in the ports tree DEBUG: xorg-libXxf86vm 1.1.0_0 is the latest installed DEBUG: xorg-libXxf86vm 1.1.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXxf86vm DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXxf86vm. DEBUG: Requested variant i386 is not provided by port xorg-libXxf86vm. DEBUG: Requested variant macosx is not provided by port xorg-libXxf86vm. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xf86vidmodeproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-xf86vidmodeproto 2.3_0 exists in the ports tree DEBUG: xorg-xf86vidmodeproto 2.3_0 is the latest installed DEBUG: xorg-xf86vidmodeproto 2.3_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xf86vidmodeproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-xf86vidmodeproto. DEBUG: Requested variant i386 is not provided by port xorg-xf86vidmodeproto. DEBUG: Requested variant macosx is not provided by port xorg-xf86vidmodeproto. DEBUG: No need to upgrade! xorg-xf86vidmodeproto 2.3_0 >= xorg-xf86vidmodeproto 2.3_0 DEBUG: No need to upgrade! xorg-libXxf86vm 1.1.0_0 >= xorg-libXxf86vm 1.1.0_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libdmx DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libdmx 1.1.0_0 exists in the ports tree DEBUG: xorg-libdmx 1.1.0_0 is the latest installed DEBUG: xorg-libdmx 1.1.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libdmx DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libdmx. DEBUG: Requested variant i386 is not provided by port xorg-libdmx. DEBUG: Requested variant macosx is not provided by port xorg-libdmx. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-dmxproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-dmxproto 2.3_0 exists in the ports tree DEBUG: xorg-dmxproto 2.3_0 is the latest installed DEBUG: xorg-dmxproto 2.3_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-dmxproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-dmxproto. DEBUG: Requested variant i386 is not provided by port xorg-dmxproto. DEBUG: Requested variant macosx is not provided by port xorg-dmxproto. DEBUG: No need to upgrade! xorg-dmxproto 2.3_0 >= xorg-dmxproto 2.3_0 DEBUG: No need to upgrade! xorg-libdmx 1.1.0_0 >= xorg-libdmx 1.1.0_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libxcb DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libxcb 1.4_0 exists in the ports tree DEBUG: xorg-libxcb 1.4_0 +python26 is the latest installed DEBUG: xorg-libxcb 1.4_0 +python26 is active DEBUG: Merging existing variants python26 into variants DEBUG: new fully merged portvariants: python26 + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libxcb DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libxcb. DEBUG: Requested variant i386 is not provided by port xorg-libxcb. DEBUG: Requested variant macosx is not provided by port xorg-libxcb. DEBUG: Executing variant python26 provides python26 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libpthread-stubs DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libpthread-stubs 0.1_0 exists in the ports tree DEBUG: xorg-libpthread-stubs 0.1_0 is the latest installed DEBUG: xorg-libpthread-stubs 0.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libpthread-stubs DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-libpthread-stubs. DEBUG: Requested variant i386 is not provided by port xorg-libpthread-stubs. DEBUG: Requested variant macosx is not provided by port xorg-libpthread-stubs. DEBUG: No need to upgrade! xorg-libpthread-stubs 0.1_0 >= xorg-libpthread-stubs 0.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcb-proto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-xcb-proto 1.5_1 exists in the ports tree DEBUG: xorg-xcb-proto 1.5_1 +python26 is the latest installed DEBUG: xorg-xcb-proto 1.5_1 +python26 is active DEBUG: Merging existing variants python26 into variants DEBUG: new fully merged portvariants: python26 + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcb-proto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-xcb-proto. DEBUG: Requested variant i386 is not provided by port xorg-xcb-proto. DEBUG: Requested variant macosx is not provided by port xorg-xcb-proto. DEBUG: Executing variant python26 provides python26 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libxml2 2.7.5_0 exists in the ports tree DEBUG: libxml2 2.7.5_0 is the latest installed DEBUG: libxml2 2.7.5_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port libxml2. DEBUG: Requested variant i386 is not provided by port libxml2. DEBUG: Requested variant macosx is not provided by port libxml2. DEBUG: No need to upgrade! libxml2 2.7.5_0 >= libxml2 2.7.5_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python26 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: python26 2.6.3_0 exists in the ports tree DEBUG: python26 2.6.3_0 +darwin is the latest installed DEBUG: python26 2.6.3_0 +darwin is active DEBUG: Merging existing variants darwin into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python26 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant i386 is not provided by port python26. DEBUG: Requested variant macosx is not provided by port python26. DEBUG: Executing variant darwin provides darwin DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl DEBUG: epoch: in tree: 1 installed: 1 DEBUG: openssl 0.9.8k_0 exists in the ports tree DEBUG: openssl 0.9.8k_0 +darwin is the latest installed DEBUG: openssl 0.9.8k_0 +darwin is active DEBUG: Merging existing variants darwin into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant i386 is not provided by port openssl. DEBUG: Requested variant macosx is not provided by port openssl. DEBUG: Executing variant darwin provides darwin DEBUG: No need to upgrade! openssl 0.9.8k_0 >= openssl 0.9.8k_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/tk DEBUG: epoch: in tree: 0 installed: 0 DEBUG: tk 8.5.7_0 exists in the ports tree DEBUG: tk 8.5.7_0 +darwin is the latest installed DEBUG: tk 8.5.7_0 +darwin is active DEBUG: Merging existing variants darwin into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/tk DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: adding the default universal variant DEBUG: Requested variant i386 is not provided by port tk. DEBUG: Requested variant macosx is not provided by port tk. DEBUG: Executing variant darwin provides darwin DEBUG: No need to upgrade! tk 8.5.7_0 >= tk 8.5.7_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: sqlite3 3.6.18_0 exists in the ports tree DEBUG: sqlite3 3.6.18_0 is the latest installed DEBUG: sqlite3 3.6.18_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port sqlite3. DEBUG: Requested variant i386 is not provided by port sqlite3. DEBUG: Requested variant macosx is not provided by port sqlite3. DEBUG: No need to upgrade! sqlite3 3.6.18_0 >= sqlite3 3.6.18_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: db46 4.6.21_5 exists in the ports tree DEBUG: db46 4.6.21_5 is the latest installed DEBUG: db46 4.6.21_5 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port db46. DEBUG: Requested variant i386 is not provided by port db46. DEBUG: Requested variant macosx is not provided by port db46. DEBUG: No need to upgrade! db46 4.6.21_5 >= db46 4.6.21_5 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gdbm 1.8.3_1 exists in the ports tree DEBUG: gdbm 1.8.3_1 is the latest installed DEBUG: gdbm 1.8.3_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port gdbm. DEBUG: Requested variant i386 is not provided by port gdbm. DEBUG: Requested variant macosx is not provided by port gdbm. DEBUG: No need to upgrade! gdbm 1.8.3_1 >= gdbm 1.8.3_1 DEBUG: No need to upgrade! python26 2.6.3_0 >= python26 2.6.3_0 DEBUG: No need to upgrade! xorg-xcb-proto 1.5_1 >= xorg-xcb-proto 1.5_1 DEBUG: No need to upgrade! xorg-libxcb 1.4_0 >= xorg-libxcb 1.4_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libxkbfile DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libxkbfile 1.0.6_0 exists in the ports tree DEBUG: xorg-libxkbfile 1.0.6_0 is the latest installed DEBUG: xorg-libxkbfile 1.0.6_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libxkbfile DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libxkbfile. DEBUG: Requested variant i386 is not provided by port xorg-libxkbfile. DEBUG: Requested variant macosx is not provided by port xorg-libxkbfile. DEBUG: No need to upgrade! xorg-libxkbfile 1.0.6_0 >= xorg-libxkbfile 1.0.6_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libxkbui DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libxkbui 1.0.2_0 exists in the ports tree DEBUG: xorg-libxkbui 1.0.2_0 is the latest installed DEBUG: xorg-libxkbui 1.0.2_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libxkbui DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libxkbui. DEBUG: Requested variant i386 is not provided by port xorg-libxkbui. DEBUG: Requested variant macosx is not provided by port xorg-libxkbui. DEBUG: No need to upgrade! xorg-libxkbui 1.0.2_0 >= xorg-libxkbui 1.0.2_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcb-util DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-xcb-util 0.3.6_0 exists in the ports tree DEBUG: xorg-xcb-util 0.3.6_0 is the latest installed DEBUG: xorg-xcb-util 0.3.6_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcb-util DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-xcb-util. DEBUG: Requested variant i386 is not provided by port xorg-xcb-util. DEBUG: Requested variant macosx is not provided by port xorg-xcb-util. DEBUG: No need to upgrade! xorg-xcb-util 0.3.6_0 >= xorg-xcb-util 0.3.6_0 DEBUG: No need to upgrade! xorg-libs 20090224_0 >= xorg-libs 20090224_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/gawk DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gawk 3.1.7_0 exists in the ports tree DEBUG: gawk 3.1.7_0 is the latest installed DEBUG: gawk 3.1.7_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/gawk DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port gawk. DEBUG: Requested variant i386 is not provided by port gawk. DEBUG: Requested variant macosx is not provided by port gawk. DEBUG: No need to upgrade! gawk 3.1.7_0 >= gawk 3.1.7_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/java/junit DEBUG: epoch: in tree: 0 installed: 0 DEBUG: junit 4.6_1 exists in the ports tree DEBUG: junit 4.6_1 is the latest installed DEBUG: junit 4.6_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/java/junit DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port junit. DEBUG: Requested variant i386 is not provided by port junit. DEBUG: Requested variant macosx is not provided by port junit. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/unzip DEBUG: unzip is *not* installed by MacPorts DEBUG: Searching for dependency: unzip DEBUG: Didn't find receipt, going to depspec regex for: unzip DEBUG: Found Dependency: path: /usr/bin filename: unzip regex: ^unzip$ DEBUG: unzip not installed, soft dependency satisfied DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/apache-ant DEBUG: epoch: in tree: 0 installed: 0 DEBUG: apache-ant 1.7.1_0 exists in the ports tree DEBUG: apache-ant 1.7.1_0 +darwin is the latest installed DEBUG: apache-ant 1.7.1_0 +darwin is active DEBUG: Merging existing variants darwin into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/apache-ant DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant i386 is not provided by port apache-ant. DEBUG: Requested variant macosx is not provided by port apache-ant. DEBUG: Executing variant darwin provides darwin DEBUG: No need to upgrade! apache-ant 1.7.1_0 >= apache-ant 1.7.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/java/hamcrest-core DEBUG: epoch: in tree: 0 installed: 0 DEBUG: hamcrest-core 1.2_0 exists in the ports tree DEBUG: hamcrest-core 1.2_0 is the latest installed DEBUG: hamcrest-core 1.2_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/java/hamcrest-core DEBUG: OS Platform: darwin DEBUG: OS Version: 10.0.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port hamcrest-core. DEBUG: Requested variant i386 is not provided by port hamcrest-core. DEBUG: Requested variant macosx is not provided by port hamcrest-core. DEBUG: No need to upgrade! hamcrest-core 1.2_0 >= hamcrest-core 1.2_0 DEBUG: No need to upgrade! junit 4.6_1 >= junit 4.6_1 ---> Computing dependencies for swi-prolog DEBUG: Searching for dependency: readline DEBUG: Found Dependency: receipt exists for readline DEBUG: Searching for dependency: ncurses DEBUG: Found Dependency: receipt exists for ncurses DEBUG: Searching for dependency: jpeg DEBUG: Found Dependency: receipt exists for jpeg DEBUG: Searching for dependency: libmcrypt DEBUG: Found Dependency: receipt exists for libmcrypt DEBUG: Searching for dependency: gmp DEBUG: Found Dependency: receipt exists for gmp DEBUG: Searching for dependency: zlib DEBUG: Found Dependency: receipt exists for zlib DEBUG: Searching for dependency: xorg-libs DEBUG: Found Dependency: receipt exists for xorg-libs DEBUG: Searching for dependency: gawk DEBUG: Found Dependency: receipt exists for gawk DEBUG: Searching for dependency: junit DEBUG: Found Dependency: receipt exists for junit DEBUG: Executing org.macports.main (swi-prolog) DEBUG: Skipping completed org.macports.fetch (swi-prolog) DEBUG: Skipping completed org.macports.checksum (swi-prolog) DEBUG: Skipping completed org.macports.extract (swi-prolog) DEBUG: Skipping completed org.macports.patch (swi-prolog) DEBUG: Skipping completed org.macports.configure (swi-prolog) ---> Building swi-prolog DEBUG: Executing org.macports.build (swi-prolog) DEBUG: port disallows a parallel build DEBUG: Environment: CPATH='/usr/include:/opt/local/include' MACOSX_DEPLOYMENT_TARGET='10.6' LIBRARY_PATH='/usr/lib:/opt/local/lib' CC='/usr/bin/gcc-4.2' JUNIT='/opt/local/share/java/junit.jar' DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_swi-prolog/work/pl-5.6.63" && /usr/bin/make all' **************** Making SWI-Prolog 5.6.63 for i386-darwin10.0.0 To be installed in /opt/local/bin/swipl Home (libraries) in /opt/local/lib/swipl-5.6.63 **************** No GIT version change make[2]: Nothing to be done for `all'. make[2]: Nothing to be done for `all'. rm -f ../lib/i386-darwin10.0.0/libpl.a ar r ../lib/i386-darwin10.0.0/libpl.a pl-atom.o pl-wam.o pl-stream.o pl-error.o pl-arith.o pl-bag.o pl-comp.o pl-rc.o pl-dwim.o pl-ext.o pl-file.o pl-flag.o pl-fmt.o pl-funct.o pl-gc.o pl-glob.o pl-itf.o pl-list.o pl-load.o pl-modul.o pl-op.o pl-os.o pl-prims.o pl-pro.o pl-proc.o pl-prof.o pl-read.o pl-rec.o pl-rl.o pl-setup.o pl-sys.o pl-table.o pl-trace.o pl-util.o pl-wic.o pl-write.o pl-term.o pl-buffer.o pl-thread.o pl-xterm.o pl-feature.o pl-ctype.o pl-beos.o pl-attvar.o pl-gvar.o pl-btree.o pl-utf8.o pl-main.o pl-text.o pl-gmp.o pl-tai.o pl-segstack.o pl-hash.o pl-version.o pl-codetable.o rc/access.o rc/build.o rc/html.o rc/util.o libtai/caltime_utc.o libtai/caltime_tai.o libtai/leapsecs_sub.o libtai/leapsecs_add.o libtai/caldate_fmjd.o libtai/caldate_mjd.o libtai/leapsecs_init.o libtai/leapsecs_read.o libtai/tai_pack.o libtai/tai_unpack.o ar: creating archive ../lib/i386-darwin10.0.0/libpl.a ranlib: file: ../lib/i386-darwin10.0.0/libpl.a(pl-beos.o) has no symbols ranlib ../lib/i386-darwin10.0.0/libpl.a ranlib: file: ../lib/i386-darwin10.0.0/libpl.a(pl-beos.o) has no symbols /usr/bin/gcc-4.2 -dynamiclib -current_version 5.6.63 \ -install_name /opt/local/lib/swipl-5.6.63/lib/i386-darwin10.0.0/libpl.dylib \ -O3 -fno-strict-aliasing -o ../lib/i386-darwin10.0.0/libpl.dylib \ pl-atom.o pl-wam.o pl-stream.o pl-error.o pl-arith.o pl-bag.o pl-comp.o pl-rc.o pl-dwim.o pl-ext.o pl-file.o pl-flag.o pl-fmt.o pl-funct.o pl-gc.o pl-glob.o pl-itf.o pl-list.o pl-load.o pl-modul.o pl-op.o pl-os.o pl-prims.o pl-pro.o pl-proc.o pl-prof.o pl-read.o pl-rec.o pl-rl.o pl-setup.o pl-sys.o pl-table.o pl-trace.o pl-util.o pl-wic.o pl-write.o pl-term.o pl-buffer.o pl-thread.o pl-xterm.o pl-feature.o pl-ctype.o pl-beos.o pl-attvar.o pl-gvar.o pl-btree.o pl-utf8.o pl-main.o pl-text.o pl-gmp.o pl-tai.o pl-segstack.o pl-hash.o pl-version.o pl-codetable.o rc/access.o rc/build.o rc/html.o rc/util.o libtai/caltime_utc.o libtai/caltime_tai.o libtai/leapsecs_sub.o libtai/leapsecs_add.o libtai/caldate_fmjd.o libtai/caldate_mjd.o libtai/leapsecs_init.o libtai/leapsecs_read.o libtai/tai_pack.o libtai/tai_unpack.o -O3 -pthread -lgmp -lreadline -lncursesw -lm -ldl /opt/local/lib/libreadline.dylib /usr/bin/gcc-4.2 -O3 -pthread -o swipl pl-extend.o -L../lib/i386-darwin10.0.0 -lpl -lpl ./pl.sh -O -o swipl.prc -b ../boot/init.pl Loading boot file ... Loading Prolog startup files % messages boot compiled into $messages 0.01 sec, 156,184 bytes % toplevel boot compiled into $toplevel 0.01 sec, 76,112 bytes % attvar boot compiled into $attvar 0.00 sec, 22,928 bytes % bags boot compiled into $bags 0.00 sec, 12,200 bytes % apply boot compiled into $apply 0.00 sec, 6,688 bytes % writef boot compiled into $writef 0.00 sec, 20,304 bytes % history boot compiled into $history 0.00 sec, 25,024 bytes % dwim boot compiled into $dwim 0.01 sec, 37,104 bytes % parms boot compiled into $parms 0.00 sec, 5,952 bytes % autoload boot compiled into $autoload 0.00 sec, 33,872 bytes % qlf boot compiled into $qlf 0.00 sec, 8,024 bytes % rc boot compiled into $rc 0.00 sec, 6,872 bytes % topvars boot compiled into toplevel_variables 0.00 sec, 15,536 bytes % /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_swi-prolog/work/pl-5.6.63/boot/load.pl boot compiled 0.04 sec, 532,432 bytes SWI-Prolog boot files loaded Boot compilation has created swipl.prc ./pl.sh -x swipl.prc \ -f none -F none \ -g make_library_index\(\'../library\'\) \ -t halt cd packages && /usr/bin/make for p in clib cpp odbc table xpce sgml sgml/RDF semweb http chr clpqr nlp ssl pldoc plunit jpl zlib; do \ if [ -r $p/Makefile ]; then make -C $p || exit 1; fi; \ done make[2]: Nothing to be done for `all'. Nothing to do for this package make[2]: Nothing to be done for `all'. make[2]: Nothing to be done for `all'. **************** Making XPCE 6.6.63, December 2008 for i386-darwin10.0.0 **************** make CIFLAGS="-I. -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_swi-prolog/work/pl-5.6.63/packages/xpce/src -I/usr/include -I/usr/include -I/opt/local/include -I/opt/local/include/freetype2 " wsobjs make[4]: Nothing to be done for `wsobjs'. Running ar ru libXPCE.a objects ... ranlib: file: libXPCE.a(setup.o) has no symbols ranlib: file: libXPCE.a(x11-compat.o) has no symbols ranlib libXPCE.a ranlib: file: libXPCE.a(setup.o) has no symbols ranlib: file: libXPCE.a(x11-compat.o) has no symbols cd ../pl/src; \ CANONICAL_PATHS=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_swi-prolog/work/pl-5.6.63/packages/xpce; export CANONICAL_PATHS; \ make PLLD=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_swi-prolog/work/pl-5.6.63/packages/plld.sh PL=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_swi-prolog/work/pl-5.6.63/packages/pl.sh soall (cd ../../lib; rm -f i386-darwin10.0.0; ln -s ../src i386-darwin10.0.0) LD_RUN_PATH="/opt/local/lib:$LD_RUN_PATH"; \ export LD_RUN_PATH; \ /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_swi-prolog/work/pl-5.6.63/packages/plld.sh -shared -L/usr/lib -O3 -pthread ../../src/pl/so-interface.o ../../src/pl/pcecall.o -L../../src \ -lXPCE -L/usr/lib -lXpm -ljpeg -lXinerama -lXext -lXt -lX11 -lSM -lICE -L/opt/local/lib -lXft -lXrender -lfontconfig -lexpat -liconv -lfreetype -lz -lX11 -lXau -lXdmcp -o ../../src/pl2xpce.dylib; ld: warning: duplicate dylib /usr/lib/libiconv.2.dylib ld: warning: duplicate dylib /usr/lib/libz.1.dylib ld: warning: duplicate dylib /usr/lib/libexpat.1.dylib ld: in /usr/lib/libncurses.5.dylib, missing required architecture x86_64 in file collect2: ld returned 1 exit status /usr/bin/gcc-4.2 returned code 256 *** /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_swi-prolog/work/pl-5.6.63/src/../src/plld exit status 1 make[5]: *** [axpce../../src/pl2xpce.dylib] Error 1 make[4]: *** [../../src/pl2xpce.dylib] Error 2 make[3]: *** [pl-itf] Error 2 make[2]: *** [all] Error 2 make[1]: *** [objects] Error 1 make: *** [packages] Error 2 Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_swi-prolog/work/pl-5.6.63" && /usr/bin/make all " returned error 2 Command output: **************** make CIFLAGS="-I. -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_swi-prolog/work/pl-5.6.63/packages/xpce/src -I/usr/include -I/usr/include -I/opt/local/include -I/opt/local/include/freetype2 " wsobjs make[4]: Nothing to be done for `wsobjs'. Running ar ru libXPCE.a objects ... ranlib: file: libXPCE.a(setup.o) has no symbols ranlib: file: libXPCE.a(x11-compat.o) has no symbols ranlib libXPCE.a ranlib: file: libXPCE.a(setup.o) has no symbols ranlib: file: libXPCE.a(x11-compat.o) has no symbols cd ../pl/src; \ CANONICAL_PATHS=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_swi-prolog/work/pl-5.6.63/packages/xpce; export CANONICAL_PATHS; \ make PLLD=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_swi-prolog/work/pl-5.6.63/packages/plld.sh PL=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_swi-prolog/work/pl-5.6.63/packages/pl.sh soall (cd ../../lib; rm -f i386-darwin10.0.0; ln -s ../src i386-darwin10.0.0) LD_RUN_PATH="/opt/local/lib:$LD_RUN_PATH"; \ export LD_RUN_PATH; \ /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_swi-prolog/work/pl-5.6.63/packages/plld.sh -shared -L/usr/lib -O3 -pthread ../../src/pl/so-interface.o ../../src/pl/pcecall.o -L../../src \ -lXPCE -L/usr/lib -lXpm -ljpeg -lXinerama -lXext -lXt -lX11 -lSM -lICE -L/opt/local/lib -lXft -lXrender -lfontconfig -lexpat -liconv -lfreetype -lz -lX11 -lXau -lXdmcp -o ../../src/pl2xpce.dylib; ld: warning: duplicate dylib /usr/lib/libiconv.2.dylib ld: warning: duplicate dylib /usr/lib/libz.1.dylib ld: warning: duplicate dylib /usr/lib/libexpat.1.dylib ld: in /usr/lib/libncurses.5.dylib, missing required architecture x86_64 in file collect2: ld returned 1 exit status /usr/bin/gcc-4.2 returned code 256 *** /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_swi-prolog/work/pl-5.6.63/src/../src/plld exit status 1 make[5]: *** [axpce../../src/pl2xpce.dylib] Error 1 make[4]: *** [../../src/pl2xpce.dylib] Error 2 make[3]: *** [pl-itf] Error 2 make[2]: *** [all] Error 2 make[1]: *** [objects] Error 1 make: *** [packages] Error 2 DEBUG: Backtrace: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_swi-prolog/work/pl-5.6.63" && /usr/bin/make all " returned error 2 Command output: **************** make CIFLAGS="-I. -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_swi-prolog/work/pl-5.6.63/packages/xpce/src -I/usr/include -I/usr/include -I/opt/local/include -I/opt/local/include/freetype2 " wsobjs make[4]: Nothing to be done for `wsobjs'. Running ar ru libXPCE.a objects ... ranlib: file: libXPCE.a(setup.o) has no symbols ranlib: file: libXPCE.a(x11-compat.o) has no symbols ranlib libXPCE.a ranlib: file: libXPCE.a(setup.o) has no symbols ranlib: file: libXPCE.a(x11-compat.o) has no symbols cd ../pl/src; \ CANONICAL_PATHS=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_swi-prolog/work/pl-5.6.63/packages/xpce; export CANONICAL_PATHS; \ make PLLD=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_swi-prolog/work/pl-5.6.63/packages/plld.sh PL=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_swi-prolog/work/pl-5.6.63/packages/pl.sh soall (cd ../../lib; rm -f i386-darwin10.0.0; ln -s ../src i386-darwin10.0.0) LD_RUN_PATH="/opt/local/lib:$LD_RUN_PATH"; \ export LD_RUN_PATH; \ /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_swi-prolog/work/pl-5.6.63/packages/plld.sh -shared -L/usr/lib -O3 -pthread ../../src/pl/so-interface.o ../../src/pl/pcecall.o -L../../src \ -lXPCE -L/usr/lib -lXpm -ljpeg -lXinerama -lXext -lXt -lX11 -lSM -lICE -L/opt/local/lib -lXft -lXrender -lfontconfig -lexpat -liconv -lfreetype -lz -lX11 -lXau -lXdmcp -o ../../src/pl2xpce.dylib; ld: warning: duplicate dylib /usr/lib/libiconv.2.dylib ld: warning: duplicate dylib /usr/lib/libz.1.dylib ld: warning: duplicate dylib /usr/lib/libexpat.1.dylib ld: in /usr/lib/libncurses.5.dylib, missing required architecture x86_64 in file collect2: ld returned 1 exit status /usr/bin/gcc-4.2 returned code 256 *** /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_swi-prolog/work/pl-5.6.63/src/../src/plld exit status 1 make[5]: *** [axpce../../src/pl2xpce.dylib] Error 1 make[4]: *** [../../src/pl2xpce.dylib] Error 2 make[3]: *** [pl-itf] Error 2 make[2]: *** [all] Error 2 make[1]: *** [objects] Error 1 make: *** [packages] Error 2 while executing "command_exec build" (procedure "portbuild::build_main" line 9) invoked from within "$procedure $targetname" Warning: the following items did not execute (for swi-prolog): org.macports.activate org.macports.build org.macports.destroot org.macports.install Error: Status 1 encountered during processing.