IGetLostInLinesOfTraffic:~ Cavin$ sudo port -d install gdm
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gdm
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port gdm.
DEBUG: Requested variant i386 is not provided by port gdm.
DEBUG: Requested variant macosx is not provided by port gdm.
DEBUG: Starting logging for gdm
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gnome-panel 2.26.3_0 exists in the ports tree
DEBUG: gnome-panel 2.26.3_0  is the latest installed
DEBUG: gnome-panel 2.26.3_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gnome-panel
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port gnome-panel.
DEBUG: Requested variant i386 is not provided by port gnome-panel.
DEBUG: Requested variant macosx is not provided by port gnome-panel.
DEBUG: No need to upgrade! gnome-panel 2.26.3_0 >= gnome-panel 2.26.3_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gnome-desktop 2.26.3_0 exists in the ports tree
DEBUG: gnome-desktop 2.26.3_0  is the latest installed
DEBUG: gnome-desktop 2.26.3_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gnome-desktop
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant darwin is not provided by port gnome-desktop.
DEBUG: Requested variant i386 is not provided by port gnome-desktop.
DEBUG: Requested variant macosx is not provided by port gnome-desktop.
DEBUG: No need to upgrade! gnome-desktop 2.26.3_0 >= gnome-desktop 2.26.3_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gconf 2.26.2_0 exists in the ports tree
DEBUG: gconf 2.26.2_0  is the latest installed
DEBUG: gconf 2.26.2_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gconf
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gconf.
DEBUG: Requested variant i386 is not provided by port gconf.
DEBUG: Requested variant macosx is not provided by port gconf.
DEBUG: No need to upgrade! gconf 2.26.2_0 >= gconf 2.26.2_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gtk2 2.18.6_0 exists in the ports tree
DEBUG: gtk2 2.18.6_0 +x11 is the latest installed
DEBUG: gtk2 2.18.6_0 +x11 is active
DEBUG: Merging existing variants x11 into variants
DEBUG: new fully merged portvariants: x11 +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/gtk2
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gtk2.
DEBUG: Requested variant i386 is not provided by port gtk2.
DEBUG: Requested variant macosx is not provided by port gtk2.
DEBUG: Executing variant x11 provides x11
DEBUG: No need to upgrade! gtk2 2.18.6_0 >= gtk2 2.18.6_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: cairo 1.8.8_0 exists in the ports tree
DEBUG: cairo 1.8.8_0 +macosx is the latest installed
DEBUG: cairo 1.8.8_0 +macosx is active
DEBUG: Merging existing variants macosx into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/cairo
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port cairo.
DEBUG: Requested variant i386 is not provided by port cairo.
DEBUG: Executing variant macosx provides macosx
DEBUG: No need to upgrade! cairo 1.8.8_0 >= cairo 1.8.8_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libpixman 0.16.4_0 exists in the ports tree
DEBUG: libpixman 0.16.4_0  is the latest installed
DEBUG: libpixman 0.16.4_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpixman
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port libpixman.
DEBUG: Requested variant i386 is not provided by port libpixman.
DEBUG: Requested variant macosx is not provided by port libpixman.
DEBUG: No need to upgrade! libpixman 0.16.4_0 >= libpixman 0.16.4_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xrender 0.9.5_0 exists in the ports tree
DEBUG: xrender 0.9.5_0  is the latest installed
DEBUG: xrender 0.9.5_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xrender.
DEBUG: Requested variant i386 is not provided by port xrender.
DEBUG: Requested variant macosx is not provided by port xrender.
DEBUG: No need to upgrade! xrender 0.9.5_0 >= xrender 0.9.5_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libX11 1.3.3_0 exists in the ports tree
DEBUG: xorg-libX11 1.3.3_0  is the latest installed
DEBUG: xorg-libX11 1.3.3_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libX11.
DEBUG: Requested variant i386 is not provided by port xorg-libX11.
DEBUG: Requested variant macosx is not provided by port xorg-libX11.
DEBUG: No need to upgrade! xorg-libX11 1.3.3_0 >= xorg-libX11 1.3.3_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXdmcp 1.0.3_0 exists in the ports tree
DEBUG: xorg-libXdmcp 1.0.3_0  is the latest installed
DEBUG: xorg-libXdmcp 1.0.3_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libXdmcp.
DEBUG: Requested variant i386 is not provided by port xorg-libXdmcp.
DEBUG: Requested variant macosx is not provided by port xorg-libXdmcp.
DEBUG: No need to upgrade! xorg-libXdmcp 1.0.3_0 >= xorg-libXdmcp 1.0.3_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXau 1.0.5_0 exists in the ports tree
DEBUG: xorg-libXau 1.0.5_0  is the latest installed
DEBUG: xorg-libXau 1.0.5_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libXau.
DEBUG: Requested variant i386 is not provided by port xorg-libXau.
DEBUG: Requested variant macosx is not provided by port xorg-libXau.
DEBUG: No need to upgrade! xorg-libXau 1.0.5_0 >= xorg-libXau 1.0.5_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-xproto 7.0.16_0 exists in the ports tree
DEBUG: xorg-xproto 7.0.16_0  is the latest installed
DEBUG: xorg-xproto 7.0.16_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-xproto.
DEBUG: Requested variant i386 is not provided by port xorg-xproto.
DEBUG: Requested variant macosx is not provided by port xorg-xproto.
DEBUG: No need to upgrade! xorg-xproto 7.0.16_0 >= xorg-xproto 7.0.16_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-kbproto 1.0.4_0 exists in the ports tree
DEBUG: xorg-kbproto 1.0.4_0  is the latest installed
DEBUG: xorg-kbproto 1.0.4_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-kbproto.
DEBUG: Requested variant i386 is not provided by port xorg-kbproto.
DEBUG: Requested variant macosx is not provided by port xorg-kbproto.
DEBUG: No need to upgrade! xorg-kbproto 1.0.4_0 >= xorg-kbproto 1.0.4_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-renderproto 0.11_0 exists in the ports tree
DEBUG: xorg-renderproto 0.11_0  is the latest installed
DEBUG: xorg-renderproto 0.11_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-renderproto
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-renderproto.
DEBUG: Requested variant i386 is not provided by port xorg-renderproto.
DEBUG: Requested variant macosx is not provided by port xorg-renderproto.
DEBUG: No need to upgrade! xorg-renderproto 0.11_0 >= xorg-renderproto 0.11_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: fontconfig 2.8.0_0 exists in the ports tree
DEBUG: fontconfig 2.8.0_0 +macosx is the latest installed
DEBUG: fontconfig 2.8.0_0 +macosx is active
DEBUG: Merging existing variants macosx into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port fontconfig.
DEBUG: Requested variant i386 is not provided by port fontconfig.
DEBUG: Executing variant macosx provides macosx
DEBUG: No need to upgrade! fontconfig 2.8.0_0 >= fontconfig 2.8.0_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libiconv 1.13.1_0 exists in the ports tree
DEBUG: libiconv 1.13.1_0  is the latest installed
DEBUG: libiconv 1.13.1_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port libiconv.
DEBUG: Requested variant i386 is not provided by port libiconv.
DEBUG: Requested variant macosx is not provided by port libiconv.
DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: expat 2.0.1_0 exists in the ports tree
DEBUG: expat 2.0.1_0  is the latest installed
DEBUG: expat 2.0.1_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port expat.
DEBUG: Requested variant i386 is not provided by port expat.
DEBUG: Requested variant macosx is not provided by port expat.
DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: freetype 2.3.11_1 exists in the ports tree
DEBUG: freetype 2.3.11_1 +macosx is the latest installed
DEBUG: freetype 2.3.11_1 +macosx is active
DEBUG: Merging existing variants macosx into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port freetype.
DEBUG: Requested variant i386 is not provided by port freetype.
DEBUG: Executing variant macosx provides macosx
DEBUG: No need to upgrade! freetype 2.3.11_1 >= freetype 2.3.11_1
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: zlib 1.2.3_4 exists in the ports tree
DEBUG: zlib 1.2.3_4  is the latest installed
DEBUG: zlib 1.2.3_4  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port zlib.
DEBUG: Requested variant i386 is not provided by port zlib.
DEBUG: Requested variant macosx is not provided by port zlib.
DEBUG: No need to upgrade! zlib 1.2.3_4 >= zlib 1.2.3_4
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libpng 1.2.42_0 exists in the ports tree
DEBUG: libpng 1.2.42_0  is the latest installed
DEBUG: libpng 1.2.42_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port libpng.
DEBUG: Requested variant i386 is not provided by port libpng.
DEBUG: Requested variant macosx is not provided by port libpng.
DEBUG: No need to upgrade! libpng 1.2.42_0 >= libpng 1.2.42_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: glib2 2.22.4_0 exists in the ports tree
DEBUG: glib2 2.22.4_0 +darwin is the latest installed
DEBUG: glib2 2.22.4_0 +darwin is active
DEBUG: Merging existing variants darwin into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/glib2
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant i386 is not provided by port glib2.
DEBUG: Requested variant macosx is not provided by port glib2.
DEBUG: Executing variant darwin provides darwin
DEBUG: No need to upgrade! glib2 2.22.4_0 >= glib2 2.22.4_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gettext 0.17_4 exists in the ports tree
DEBUG: gettext 0.17_4  is the latest installed
DEBUG: gettext 0.17_4  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gettext.
DEBUG: Requested variant i386 is not provided by port gettext.
DEBUG: Requested variant macosx is not provided by port gettext.
DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncurses 5.7_0 exists in the ports tree
DEBUG: ncurses 5.7_0 +darwin_10 is the latest installed
DEBUG: ncurses 5.7_0 +darwin_10 is active
DEBUG: Merging existing variants darwin_10 into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port ncurses.
DEBUG: Requested variant i386 is not provided by port ncurses.
DEBUG: Requested variant macosx is not provided by port ncurses.
DEBUG: Executing variant darwin_10 provides darwin_10
DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncursesw 5.7_0 exists in the ports tree
DEBUG: ncursesw 5.7_0 +darwin_10 is the latest installed
DEBUG: ncursesw 5.7_0 +darwin_10 is active
DEBUG: Merging existing variants darwin_10 into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port ncursesw.
DEBUG: Requested variant i386 is not provided by port ncursesw.
DEBUG: Requested variant macosx is not provided by port ncursesw.
DEBUG: Executing variant darwin_10 provides darwin_10
DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: perl5 5.8.9_0 exists in the ports tree
DEBUG: perl5 5.8.9_0  is the latest installed
DEBUG: perl5 5.8.9_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port perl5.
DEBUG: Requested variant i386 is not provided by port perl5.
DEBUG: Requested variant macosx is not provided by port perl5.
DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: perl5.8 5.8.9_3 exists in the ports tree
DEBUG: perl5.8 5.8.9_3  is the latest installed
DEBUG: perl5.8 5.8.9_3  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port perl5.8.
DEBUG: Requested variant i386 is not provided by port perl5.8.
DEBUG: Requested variant macosx is not provided by port perl5.8.
DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3
DEBUG: Found Dependency: path: /usr/bin filename: python regex: ^python$
DEBUG: python_select is *not* installed by MacPorts
DEBUG: Searching for dependency: python_select
DEBUG: Didn't find receipt, going to depspec regex for: python_select
DEBUG: Found Dependency: path: /usr/bin filename: python regex: ^python$
DEBUG: python_select not installed, soft dependency satisfied
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: jpeg 7_0 exists in the ports tree
DEBUG: jpeg 7_0  is the latest installed
DEBUG: jpeg 7_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port jpeg.
DEBUG: Requested variant i386 is not provided by port jpeg.
DEBUG: Requested variant macosx is not provided by port jpeg.
DEBUG: No need to upgrade! jpeg 7_0 >= jpeg 7_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: tiff 3.9.2_2 exists in the ports tree
DEBUG: tiff 3.9.2_2 +macosx is the latest installed
DEBUG: tiff 3.9.2_2 +macosx is active
DEBUG: Merging existing variants macosx into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port tiff.
DEBUG: Requested variant i386 is not provided by port tiff.
DEBUG: Executing variant macosx provides macosx
DEBUG: No need to upgrade! tiff 3.9.2_2 >= tiff 3.9.2_2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: jasper 1.900.1_6 exists in the ports tree
DEBUG: jasper 1.900.1_6  is the latest installed
DEBUG: jasper 1.900.1_6  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jasper
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port jasper.
DEBUG: Requested variant i386 is not provided by port jasper.
DEBUG: Requested variant macosx is not provided by port jasper.
DEBUG: No need to upgrade! jasper 1.900.1_6 >= jasper 1.900.1_6
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: atk 1.26.0_1 exists in the ports tree
DEBUG: atk 1.26.0_1  is the latest installed
DEBUG: atk 1.26.0_1  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/atk
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port atk.
DEBUG: Requested variant i386 is not provided by port atk.
DEBUG: Requested variant macosx is not provided by port atk.
DEBUG: No need to upgrade! atk 1.26.0_1 >= atk 1.26.0_1
DEBUG: epoch: in tree: 1 installed: 1
DEBUG: pango 1.24.5_0 exists in the ports tree
DEBUG: pango 1.24.5_0 +macosx is the latest installed
DEBUG: pango 1.24.5_0 +macosx is active
DEBUG: Merging existing variants macosx into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/pango
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port pango.
DEBUG: Requested variant i386 is not provided by port pango.
DEBUG: Executing variant macosx provides macosx
DEBUG: No need to upgrade! pango 1.24.5_0 >= pango 1.24.5_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: Xft2 2.1.14_0 exists in the ports tree
DEBUG: Xft2 2.1.14_0  is the latest installed
DEBUG: Xft2 2.1.14_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port Xft2.
DEBUG: Requested variant i386 is not provided by port Xft2.
DEBUG: Requested variant macosx is not provided by port Xft2.
DEBUG: No need to upgrade! Xft2 2.1.14_0 >= Xft2 2.1.14_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXi 1.3_0 exists in the ports tree
DEBUG: xorg-libXi 1.3_0  is the latest installed
DEBUG: xorg-libXi 1.3_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXi
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libXi.
DEBUG: Requested variant i386 is not provided by port xorg-libXi.
DEBUG: Requested variant macosx is not provided by port xorg-libXi.
DEBUG: No need to upgrade! xorg-libXi 1.3_0 >= xorg-libXi 1.3_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXext 1.1.1_0 exists in the ports tree
DEBUG: xorg-libXext 1.1.1_0  is the latest installed
DEBUG: xorg-libXext 1.1.1_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXext
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libXext.
DEBUG: Requested variant i386 is not provided by port xorg-libXext.
DEBUG: Requested variant macosx is not provided by port xorg-libXext.
DEBUG: No need to upgrade! xorg-libXext 1.1.1_0 >= xorg-libXext 1.1.1_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-xextproto 7.1.1_0 exists in the ports tree
DEBUG: xorg-xextproto 7.1.1_0  is the latest installed
DEBUG: xorg-xextproto 7.1.1_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-xextproto.
DEBUG: Requested variant i386 is not provided by port xorg-xextproto.
DEBUG: Requested variant macosx is not provided by port xorg-xextproto.
DEBUG: No need to upgrade! xorg-xextproto 7.1.1_0 >= xorg-xextproto 7.1.1_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-inputproto 2.0_0 exists in the ports tree
DEBUG: xorg-inputproto 2.0_0  is the latest installed
DEBUG: xorg-inputproto 2.0_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-inputproto
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-inputproto.
DEBUG: Requested variant i386 is not provided by port xorg-inputproto.
DEBUG: Requested variant macosx is not provided by port xorg-inputproto.
DEBUG: No need to upgrade! xorg-inputproto 2.0_0 >= xorg-inputproto 2.0_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXrandr 1.3.0_1 exists in the ports tree
DEBUG: xorg-libXrandr 1.3.0_1  is the latest installed
DEBUG: xorg-libXrandr 1.3.0_1  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXrandr
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libXrandr.
DEBUG: Requested variant i386 is not provided by port xorg-libXrandr.
DEBUG: Requested variant macosx is not provided by port xorg-libXrandr.
DEBUG: No need to upgrade! xorg-libXrandr 1.3.0_1 >= xorg-libXrandr 1.3.0_1
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-randrproto 1.3.1_0 exists in the ports tree
DEBUG: xorg-randrproto 1.3.1_0  is the latest installed
DEBUG: xorg-randrproto 1.3.1_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-randrproto
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-randrproto.
DEBUG: Requested variant i386 is not provided by port xorg-randrproto.
DEBUG: Requested variant macosx is not provided by port xorg-randrproto.
DEBUG: No need to upgrade! xorg-randrproto 1.3.1_0 >= xorg-randrproto 1.3.1_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXcursor 1.1.10_0 exists in the ports tree
DEBUG: xorg-libXcursor 1.1.10_0  is the latest installed
DEBUG: xorg-libXcursor 1.1.10_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXcursor
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libXcursor.
DEBUG: Requested variant i386 is not provided by port xorg-libXcursor.
DEBUG: Requested variant macosx is not provided by port xorg-libXcursor.
DEBUG: No need to upgrade! xorg-libXcursor 1.1.10_0 >= xorg-libXcursor 1.1.10_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXfixes 4.0.4_0 exists in the ports tree
DEBUG: xorg-libXfixes 4.0.4_0  is the latest installed
DEBUG: xorg-libXfixes 4.0.4_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXfixes
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libXfixes.
DEBUG: Requested variant i386 is not provided by port xorg-libXfixes.
DEBUG: Requested variant macosx is not provided by port xorg-libXfixes.
DEBUG: No need to upgrade! xorg-libXfixes 4.0.4_0 >= xorg-libXfixes 4.0.4_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-fixesproto 4.1.1_0 exists in the ports tree
DEBUG: xorg-fixesproto 4.1.1_0  is the latest installed
DEBUG: xorg-fixesproto 4.1.1_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-fixesproto
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-fixesproto.
DEBUG: Requested variant i386 is not provided by port xorg-fixesproto.
DEBUG: Requested variant macosx is not provided by port xorg-fixesproto.
DEBUG: No need to upgrade! xorg-fixesproto 4.1.1_0 >= xorg-fixesproto 4.1.1_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXinerama 1.1_0 exists in the ports tree
DEBUG: xorg-libXinerama 1.1_0  is the latest installed
DEBUG: xorg-libXinerama 1.1_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXinerama
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libXinerama.
DEBUG: Requested variant i386 is not provided by port xorg-libXinerama.
DEBUG: Requested variant macosx is not provided by port xorg-libXinerama.
DEBUG: No need to upgrade! xorg-libXinerama 1.1_0 >= xorg-libXinerama 1.1_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-xineramaproto 1.2_0 exists in the ports tree
DEBUG: xorg-xineramaproto 1.2_0  is the latest installed
DEBUG: xorg-xineramaproto 1.2_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xineramaproto
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-xineramaproto.
DEBUG: Requested variant i386 is not provided by port xorg-xineramaproto.
DEBUG: Requested variant macosx is not provided by port xorg-xineramaproto.
DEBUG: No need to upgrade! xorg-xineramaproto 1.2_0 >= xorg-xineramaproto 1.2_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXdamage 1.1.2_0 exists in the ports tree
DEBUG: xorg-libXdamage 1.1.2_0  is the latest installed
DEBUG: xorg-libXdamage 1.1.2_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdamage
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libXdamage.
DEBUG: Requested variant i386 is not provided by port xorg-libXdamage.
DEBUG: Requested variant macosx is not provided by port xorg-libXdamage.
DEBUG: No need to upgrade! xorg-libXdamage 1.1.2_0 >= xorg-libXdamage 1.1.2_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-damageproto 1.2.0_0 exists in the ports tree
DEBUG: xorg-damageproto 1.2.0_0  is the latest installed
DEBUG: xorg-damageproto 1.2.0_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-damageproto
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-damageproto.
DEBUG: Requested variant i386 is not provided by port xorg-damageproto.
DEBUG: Requested variant macosx is not provided by port xorg-damageproto.
DEBUG: No need to upgrade! xorg-damageproto 1.2.0_0 >= xorg-damageproto 1.2.0_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXcomposite 0.4.1_0 exists in the ports tree
DEBUG: xorg-libXcomposite 0.4.1_0  is the latest installed
DEBUG: xorg-libXcomposite 0.4.1_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXcomposite
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libXcomposite.
DEBUG: Requested variant i386 is not provided by port xorg-libXcomposite.
DEBUG: Requested variant macosx is not provided by port xorg-libXcomposite.
DEBUG: No need to upgrade! xorg-libXcomposite 0.4.1_0 >= xorg-libXcomposite 0.4.1_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-compositeproto 0.4.1_0 exists in the ports tree
DEBUG: xorg-compositeproto 0.4.1_0  is the latest installed
DEBUG: xorg-compositeproto 0.4.1_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-compositeproto
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-compositeproto.
DEBUG: Requested variant i386 is not provided by port xorg-compositeproto.
DEBUG: Requested variant macosx is not provided by port xorg-compositeproto.
DEBUG: No need to upgrade! xorg-compositeproto 0.4.1_0 >= xorg-compositeproto 0.4.1_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: shared-mime-info 0.70_0 exists in the ports tree
DEBUG: shared-mime-info 0.70_0  is the latest installed
DEBUG: shared-mime-info 0.70_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/shared-mime-info
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port shared-mime-info.
DEBUG: Requested variant i386 is not provided by port shared-mime-info.
DEBUG: Requested variant macosx is not provided by port shared-mime-info.
DEBUG: No need to upgrade! shared-mime-info 0.70_0 >= shared-mime-info 0.70_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libxml2 2.7.6_0 exists in the ports tree
DEBUG: libxml2 2.7.6_0  is the latest installed
DEBUG: libxml2 2.7.6_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port libxml2.
DEBUG: Requested variant i386 is not provided by port libxml2.
DEBUG: Requested variant macosx is not provided by port libxml2.
DEBUG: No need to upgrade! libxml2 2.7.6_0 >= libxml2 2.7.6_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: dbus-glib 0.80_0 exists in the ports tree
DEBUG: dbus-glib 0.80_0  is the latest installed
DEBUG: dbus-glib 0.80_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/dbus-glib
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port dbus-glib.
DEBUG: Requested variant i386 is not provided by port dbus-glib.
DEBUG: Requested variant macosx is not provided by port dbus-glib.
DEBUG: No need to upgrade! dbus-glib 0.80_0 >= dbus-glib 0.80_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: dbus 1.2.16_1 exists in the ports tree
DEBUG: dbus 1.2.16_1  is the latest installed
DEBUG: dbus 1.2.16_1  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/dbus
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port dbus.
DEBUG: Requested variant i386 is not provided by port dbus.
DEBUG: Requested variant macosx is not provided by port dbus.
DEBUG: No need to upgrade! dbus 1.2.16_1 >= dbus 1.2.16_1
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: policykit 0.9_0 exists in the ports tree
DEBUG: policykit 0.9_0  is the latest installed
DEBUG: policykit 0.9_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/security/policykit
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port policykit.
DEBUG: Requested variant i386 is not provided by port policykit.
DEBUG: Requested variant macosx is not provided by port policykit.
DEBUG: No need to upgrade! policykit 0.9_0 >= policykit 0.9_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: orbit2 2.14.17_1 exists in the ports tree
DEBUG: orbit2 2.14.17_1  is the latest installed
DEBUG: orbit2 2.14.17_1  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/orbit2
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port orbit2.
DEBUG: Requested variant i386 is not provided by port orbit2.
DEBUG: Requested variant macosx is not provided by port orbit2.
DEBUG: No need to upgrade! orbit2 2.14.17_1 >= orbit2 2.14.17_1
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libidl 0.8.13_0 exists in the ports tree
DEBUG: libidl 0.8.13_0  is the latest installed
DEBUG: libidl 0.8.13_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libidl
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port libidl.
DEBUG: Requested variant i386 is not provided by port libidl.
DEBUG: Requested variant macosx is not provided by port libidl.
DEBUG: No need to upgrade! libidl 0.8.13_0 >= libidl 0.8.13_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: startup-notification 0.10_0 exists in the ports tree
DEBUG: startup-notification 0.10_0  is the latest installed
DEBUG: startup-notification 0.10_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/startup-notification
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port startup-notification.
DEBUG: Requested variant i386 is not provided by port startup-notification.
DEBUG: Requested variant macosx is not provided by port startup-notification.
DEBUG: No need to upgrade! startup-notification 0.10_0 >= startup-notification 0.10_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libsm 1.1.1_0 exists in the ports tree
DEBUG: xorg-libsm 1.1.1_0  is the latest installed
DEBUG: xorg-libsm 1.1.1_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libsm
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libsm.
DEBUG: Requested variant i386 is not provided by port xorg-libsm.
DEBUG: Requested variant macosx is not provided by port xorg-libsm.
DEBUG: No need to upgrade! xorg-libsm 1.1.1_0 >= xorg-libsm 1.1.1_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libice 1.0.6_0 exists in the ports tree
DEBUG: xorg-libice 1.0.6_0  is the latest installed
DEBUG: xorg-libice 1.0.6_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libice
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libice.
DEBUG: Requested variant i386 is not provided by port xorg-libice.
DEBUG: Requested variant macosx is not provided by port xorg-libice.
DEBUG: No need to upgrade! xorg-libice 1.0.6_0 >= xorg-libice 1.0.6_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libxcb 1.5_1 exists in the ports tree
DEBUG: xorg-libxcb 1.5_1 +python26 is the latest installed
DEBUG: xorg-libxcb 1.5_1 +python26 is active
DEBUG: Merging existing variants python26 into variants
DEBUG: new fully merged portvariants: python26 +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libxcb
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libxcb.
DEBUG: Requested variant i386 is not provided by port xorg-libxcb.
DEBUG: Requested variant macosx is not provided by port xorg-libxcb.
DEBUG: Executing variant python26 provides python26
DEBUG: No need to upgrade! xorg-libxcb 1.5_1 >= xorg-libxcb 1.5_1
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-xcb-proto 1.6_0 exists in the ports tree
DEBUG: xorg-xcb-proto 1.6_0 +python26 is the latest installed
DEBUG: xorg-xcb-proto 1.6_0 +python26 is active
DEBUG: Merging existing variants python26 into variants
DEBUG: new fully merged portvariants: python26 +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcb-proto
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-xcb-proto.
DEBUG: Requested variant i386 is not provided by port xorg-xcb-proto.
DEBUG: Requested variant macosx is not provided by port xorg-xcb-proto.
DEBUG: Executing variant python26 provides python26
DEBUG: No need to upgrade! xorg-xcb-proto 1.6_0 >= xorg-xcb-proto 1.6_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: python26 2.6.4_0 exists in the ports tree
DEBUG: python26 2.6.4_0 +darwin is the latest installed
DEBUG: python26 2.6.4_0 +darwin is active
DEBUG: Merging existing variants darwin into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python26
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant i386 is not provided by port python26.
DEBUG: Requested variant macosx is not provided by port python26.
DEBUG: Executing variant darwin provides darwin
DEBUG: No need to upgrade! python26 2.6.4_0 >= python26 2.6.4_0
DEBUG: epoch: in tree: 1 installed: 1
DEBUG: openssl 0.9.8l_0 exists in the ports tree
DEBUG: openssl 0.9.8l_0 +darwin is the latest installed
DEBUG: openssl 0.9.8l_0 +darwin is active
DEBUG: Merging existing variants darwin into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant i386 is not provided by port openssl.
DEBUG: Requested variant macosx is not provided by port openssl.
DEBUG: Executing variant darwin provides darwin
DEBUG: No need to upgrade! openssl 0.9.8l_0 >= openssl 0.9.8l_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: tk 8.5.8_0 exists in the ports tree
DEBUG: tk 8.5.8_0 +darwin is the latest installed
DEBUG: tk 8.5.8_0 +darwin is active
DEBUG: Merging existing variants darwin into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/tk
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant i386 is not provided by port tk.
DEBUG: Requested variant macosx is not provided by port tk.
DEBUG: Executing variant darwin provides darwin
DEBUG: No need to upgrade! tk 8.5.8_0 >= tk 8.5.8_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: tcl 8.5.8_0 exists in the ports tree
DEBUG: tcl 8.5.8_0 +darwin is the latest installed
DEBUG: tcl 8.5.8_0 +darwin is active
DEBUG: Merging existing variants darwin into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/tcl
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant i386 is not provided by port tcl.
DEBUG: Requested variant macosx is not provided by port tcl.
DEBUG: Executing variant darwin provides darwin
DEBUG: No need to upgrade! tcl 8.5.8_0 >= tcl 8.5.8_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXScrnSaver 1.2.0_0 exists in the ports tree
DEBUG: xorg-libXScrnSaver 1.2.0_0  is the latest installed
DEBUG: xorg-libXScrnSaver 1.2.0_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXScrnSaver
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libXScrnSaver.
DEBUG: Requested variant i386 is not provided by port xorg-libXScrnSaver.
DEBUG: Requested variant macosx is not provided by port xorg-libXScrnSaver.
DEBUG: No need to upgrade! xorg-libXScrnSaver 1.2.0_0 >= xorg-libXScrnSaver 1.2.0_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-scrnsaverproto 1.2.0_0 exists in the ports tree
DEBUG: xorg-scrnsaverproto 1.2.0_0  is the latest installed
DEBUG: xorg-scrnsaverproto 1.2.0_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-scrnsaverproto
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xorg-scrnsaverproto.
DEBUG: Requested variant i386 is not provided by port xorg-scrnsaverproto.
DEBUG: Requested variant macosx is not provided by port xorg-scrnsaverproto.
DEBUG: No need to upgrade! xorg-scrnsaverproto 1.2.0_0 >= xorg-scrnsaverproto 1.2.0_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: sqlite3 3.6.22_0 exists in the ports tree
DEBUG: sqlite3 3.6.22_0  is the latest installed
DEBUG: sqlite3 3.6.22_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port sqlite3.
DEBUG: Requested variant i386 is not provided by port sqlite3.
DEBUG: Requested variant macosx is not provided by port sqlite3.
DEBUG: No need to upgrade! sqlite3 3.6.22_0 >= sqlite3 3.6.22_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: readline 6.1.000_1 exists in the ports tree
DEBUG: readline 6.1.000_1 +darwin is the latest installed
DEBUG: readline 6.1.000_1 +darwin is active
DEBUG: Merging existing variants darwin into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant i386 is not provided by port readline.
DEBUG: Requested variant macosx is not provided by port readline.
DEBUG: Executing variant darwin provides darwin
DEBUG: No need to upgrade! readline 6.1.000_1 >= readline 6.1.000_1
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: db46 4.6.21_6 exists in the ports tree
DEBUG: db46 4.6.21_6  is the latest installed
DEBUG: db46 4.6.21_6  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port db46.
DEBUG: Requested variant i386 is not provided by port db46.
DEBUG: Requested variant macosx is not provided by port db46.
DEBUG: No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gdbm 1.8.3_2 exists in the ports tree
DEBUG: gdbm 1.8.3_2  is the latest installed
DEBUG: gdbm 1.8.3_2  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gdbm.
DEBUG: Requested variant i386 is not provided by port gdbm.
DEBUG: Requested variant macosx is not provided by port gdbm.
DEBUG: No need to upgrade! gdbm 1.8.3_2 >= gdbm 1.8.3_2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: bzip2 1.0.5_3 exists in the ports tree
DEBUG: bzip2 1.0.5_3 +darwin is the latest installed
DEBUG: bzip2 1.0.5_3 +darwin is active
DEBUG: Merging existing variants darwin into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant i386 is not provided by port bzip2.
DEBUG: Requested variant macosx is not provided by port bzip2.
DEBUG: Executing variant darwin provides darwin
DEBUG: No need to upgrade! bzip2 1.0.5_3 >= bzip2 1.0.5_3
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xcb 2.4_3 exists in the ports tree
DEBUG: xcb 2.4_3  is the latest installed
DEBUG: xcb 2.4_3  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xcb
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: using xmkmf, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port xcb.
DEBUG: Requested variant i386 is not provided by port xcb.
DEBUG: Requested variant macosx is not provided by port xcb.
DEBUG: No need to upgrade! xcb 2.4_3 >= xcb 2.4_3
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXaw 1.0.7_0 exists in the ports tree
DEBUG: xorg-libXaw 1.0.7_0  is the latest installed
DEBUG: xorg-libXaw 1.0.7_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXaw
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libXaw.
DEBUG: Requested variant i386 is not provided by port xorg-libXaw.
DEBUG: Requested variant macosx is not provided by port xorg-libXaw.
DEBUG: No need to upgrade! xorg-libXaw 1.0.7_0 >= xorg-libXaw 1.0.7_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXmu 1.0.5_0 exists in the ports tree
DEBUG: xorg-libXmu 1.0.5_0  is the latest installed
DEBUG: xorg-libXmu 1.0.5_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXmu
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libXmu.
DEBUG: Requested variant i386 is not provided by port xorg-libXmu.
DEBUG: Requested variant macosx is not provided by port xorg-libXmu.
DEBUG: No need to upgrade! xorg-libXmu 1.0.5_0 >= xorg-libXmu 1.0.5_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXt 1.0.7_1 exists in the ports tree
DEBUG: xorg-libXt 1.0.7_1  is the latest installed
DEBUG: xorg-libXt 1.0.7_1  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXt
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libXt.
DEBUG: Requested variant i386 is not provided by port xorg-libXt.
DEBUG: Requested variant macosx is not provided by port xorg-libXt.
DEBUG: No need to upgrade! xorg-libXt 1.0.7_1 >= xorg-libXt 1.0.7_1
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xpm 3.5.8_0 exists in the ports tree
DEBUG: xpm 3.5.8_0  is the latest installed
DEBUG: xpm 3.5.8_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xpm
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xpm.
DEBUG: Requested variant i386 is not provided by port xpm.
DEBUG: Requested variant macosx is not provided by port xpm.
DEBUG: No need to upgrade! xpm 3.5.8_0 >= xpm 3.5.8_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-xcb-util 0.3.6_0 exists in the ports tree
DEBUG: xorg-xcb-util 0.3.6_0  is the latest installed
DEBUG: xorg-xcb-util 0.3.6_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcb-util
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-xcb-util.
DEBUG: Requested variant i386 is not provided by port xorg-xcb-util.
DEBUG: Requested variant macosx is not provided by port xorg-xcb-util.
DEBUG: No need to upgrade! xorg-xcb-util 0.3.6_0 >= xorg-xcb-util 0.3.6_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: python25 2.5.4_9 exists in the ports tree
DEBUG: python25 2.5.4_9 +darwin+darwin_10+macosx is the latest installed
DEBUG: python25 2.5.4_9 +darwin+darwin_10+macosx is active
DEBUG: Merging existing variants darwin darwin_10 macosx into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python25
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant i386 is not provided by port python25.
DEBUG: Executing variant macosx provides macosx
DEBUG: Executing variant darwin provides darwin
DEBUG: Executing variant darwin_10 provides darwin_10
DEBUG: No need to upgrade! python25 2.5.4_9 >= python25 2.5.4_9
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gnome-themes 2.26.3.1_0 exists in the ports tree
DEBUG: gnome-themes 2.26.3.1_0  is the latest installed
DEBUG: gnome-themes 2.26.3.1_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gnome-themes
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port gnome-themes.
DEBUG: Requested variant i386 is not provided by port gnome-themes.
DEBUG: Requested variant macosx is not provided by port gnome-themes.
DEBUG: No need to upgrade! gnome-themes 2.26.3.1_0 >= gnome-themes 2.26.3.1_0
DEBUG: epoch: in tree: 1 installed: 1
DEBUG: gtk-engines2 2.18.4_0 exists in the ports tree
DEBUG: gtk-engines2 2.18.4_0  is the latest installed
DEBUG: gtk-engines2 2.18.4_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/gtk-engines2
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port gtk-engines2.
DEBUG: Requested variant i386 is not provided by port gtk-engines2.
DEBUG: Requested variant macosx is not provided by port gtk-engines2.
DEBUG: No need to upgrade! gtk-engines2 2.18.4_0 >= gtk-engines2 2.18.4_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gnome-icon-theme 2.26.0_0 exists in the ports tree
DEBUG: gnome-icon-theme 2.26.0_0  is the latest installed
DEBUG: gnome-icon-theme 2.26.0_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gnome-icon-theme
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port gnome-icon-theme.
DEBUG: Requested variant i386 is not provided by port gnome-icon-theme.
DEBUG: Requested variant macosx is not provided by port gnome-icon-theme.
DEBUG: No need to upgrade! gnome-icon-theme 2.26.0_0 >= gnome-icon-theme 2.26.0_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gnome-menus 2.26.2_0 exists in the ports tree
DEBUG: gnome-menus 2.26.2_0  is the latest installed
DEBUG: gnome-menus 2.26.2_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gnome-menus
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port gnome-menus.
DEBUG: Requested variant i386 is not provided by port gnome-menus.
DEBUG: Requested variant macosx is not provided by port gnome-menus.
DEBUG: No need to upgrade! gnome-menus 2.26.2_0 >= gnome-menus 2.26.2_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: py26-gtk 2.16.0_0 exists in the ports tree
DEBUG: py26-gtk 2.16.0_0  is the latest installed
DEBUG: py26-gtk 2.16.0_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-gtk
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant darwin is not provided by port py26-gtk.
DEBUG: Requested variant i386 is not provided by port py26-gtk.
DEBUG: Requested variant macosx is not provided by port py26-gtk.
DEBUG: No need to upgrade! py26-gtk 2.16.0_0 >= py26-gtk 2.16.0_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libglade2 2.6.4_1 exists in the ports tree
DEBUG: libglade2 2.6.4_1  is the latest installed
DEBUG: libglade2 2.6.4_1  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/libglade2
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port libglade2.
DEBUG: Requested variant i386 is not provided by port libglade2.
DEBUG: Requested variant macosx is not provided by port libglade2.
DEBUG: No need to upgrade! libglade2 2.6.4_1 >= libglade2 2.6.4_1
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: py26-cairo 1.8.8_0 exists in the ports tree
DEBUG: py26-cairo 1.8.8_0  is the latest installed
DEBUG: py26-cairo 1.8.8_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-cairo
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant darwin is not provided by port py26-cairo.
DEBUG: Requested variant i386 is not provided by port py26-cairo.
DEBUG: Requested variant macosx is not provided by port py26-cairo.
DEBUG: No need to upgrade! py26-cairo 1.8.8_0 >= py26-cairo 1.8.8_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: py26-numpy 1.4.0_0 exists in the ports tree
DEBUG: py26-numpy 1.4.0_0  is the latest installed
DEBUG: py26-numpy 1.4.0_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-numpy
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port py26-numpy.
DEBUG: Requested variant i386 is not provided by port py26-numpy.
DEBUG: Requested variant macosx is not provided by port py26-numpy.
DEBUG: No need to upgrade! py26-numpy 1.4.0_0 >= py26-numpy 1.4.0_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: fftw-3 3.2.2_0 exists in the ports tree
DEBUG: fftw-3 3.2.2_0 +i386 is the latest installed
DEBUG: fftw-3 3.2.2_0 +i386 is active
DEBUG: Merging existing variants i386 into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/math/fftw-3
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port fftw-3.
DEBUG: Requested variant macosx is not provided by port fftw-3.
DEBUG: Executing variant i386 provides i386
DEBUG: No need to upgrade! fftw-3 3.2.2_0 >= fftw-3 3.2.2_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: py26-nose 0.11.1_0 exists in the ports tree
DEBUG: py26-nose 0.11.1_0  is the latest installed
DEBUG: py26-nose 0.11.1_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-nose
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl
DEBUG: not using configure, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port py26-nose.
DEBUG: Requested variant i386 is not provided by port py26-nose.
DEBUG: Requested variant macosx is not provided by port py26-nose.
DEBUG: No need to upgrade! py26-nose 0.11.1_0 >= py26-nose 0.11.1_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: py26-setuptools 0.6c11_0 exists in the ports tree
DEBUG: py26-setuptools 0.6c11_0  is the latest installed
DEBUG: py26-setuptools 0.6c11_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-setuptools
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl
DEBUG: not using configure, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port py26-setuptools.
DEBUG: Requested variant i386 is not provided by port py26-setuptools.
DEBUG: Requested variant macosx is not provided by port py26-setuptools.
DEBUG: No need to upgrade! py26-setuptools 0.6c11_0 >= py26-setuptools 0.6c11_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: atlas 3.8.3_1 exists in the ports tree
DEBUG: atlas 3.8.3_1  is the latest installed
DEBUG: atlas 3.8.3_1  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/math/atlas
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port atlas.
DEBUG: Requested variant i386 is not provided by port atlas.
DEBUG: Requested variant macosx is not provided by port atlas.
DEBUG: No need to upgrade! atlas 3.8.3_1 >= atlas 3.8.3_1
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gcc43 4.3.4_0 exists in the ports tree
DEBUG: gcc43 4.3.4_0  is the latest installed
DEBUG: gcc43 4.3.4_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/gcc43
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port gcc43.
DEBUG: Requested variant i386 is not provided by port gcc43.
DEBUG: Requested variant macosx is not provided by port gcc43.
DEBUG: No need to upgrade! gcc43 4.3.4_0 >= gcc43 4.3.4_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gmp 4.3.2_0 exists in the ports tree
DEBUG: gmp 4.3.2_0  is the latest installed
DEBUG: gmp 4.3.2_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmp
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gmp.
DEBUG: Requested variant i386 is not provided by port gmp.
DEBUG: Requested variant macosx is not provided by port gmp.
DEBUG: No need to upgrade! gmp 4.3.2_0 >= gmp 4.3.2_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: mpfr 2.4.2-p1_0 exists in the ports tree
DEBUG: mpfr 2.4.2-p1_0  is the latest installed
DEBUG: mpfr 2.4.2-p1_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/mpfr
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port mpfr.
DEBUG: Requested variant i386 is not provided by port mpfr.
DEBUG: Requested variant macosx is not provided by port mpfr.
DEBUG: No need to upgrade! mpfr 2.4.2-p1_0 >= mpfr 2.4.2-p1_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gzip 1.4_0 exists in the ports tree
DEBUG: gzip 1.4_0  is the latest installed
DEBUG: gzip 1.4_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/gzip
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port gzip.
DEBUG: Requested variant i386 is not provided by port gzip.
DEBUG: Requested variant macosx is not provided by port gzip.
DEBUG: No need to upgrade! gzip 1.4_0 >= gzip 1.4_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: py26-gobject 2.18.0_0 exists in the ports tree
DEBUG: py26-gobject 2.18.0_0  is the latest installed
DEBUG: py26-gobject 2.18.0_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-gobject
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port py26-gobject.
DEBUG: Requested variant i386 is not provided by port py26-gobject.
DEBUG: Requested variant macosx is not provided by port py26-gobject.
DEBUG: No need to upgrade! py26-gobject 2.18.0_0 >= py26-gobject 2.18.0_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libxslt 1.1.26_0 exists in the ports tree
DEBUG: libxslt 1.1.26_0  is the latest installed
DEBUG: libxslt 1.1.26_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxslt
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port libxslt.
DEBUG: Requested variant i386 is not provided by port libxslt.
DEBUG: Requested variant macosx is not provided by port libxslt.
DEBUG: No need to upgrade! libxslt 1.1.26_0 >= libxslt 1.1.26_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libffi 3.0.8_1 exists in the ports tree
DEBUG: libffi 3.0.8_1  is the latest installed
DEBUG: libffi 3.0.8_1  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libffi
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port libffi.
DEBUG: Requested variant i386 is not provided by port libffi.
DEBUG: Requested variant macosx is not provided by port libffi.
DEBUG: No need to upgrade! libffi 3.0.8_1 >= libffi 3.0.8_1
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: policykit-gnome 0.9.2_0 exists in the ports tree
DEBUG: policykit-gnome 0.9.2_0  is the latest installed
DEBUG: policykit-gnome 0.9.2_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/policykit-gnome
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port policykit-gnome.
DEBUG: Requested variant i386 is not provided by port policykit-gnome.
DEBUG: Requested variant macosx is not provided by port policykit-gnome.
DEBUG: No need to upgrade! policykit-gnome 0.9.2_0 >= policykit-gnome 0.9.2_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: evolution-data-server 2.26.3_0 exists in the ports tree
DEBUG: evolution-data-server 2.26.3_0  is the latest installed
DEBUG: evolution-data-server 2.26.3_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/evolution-data-server
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant darwin is not provided by port evolution-data-server.
DEBUG: Requested variant i386 is not provided by port evolution-data-server.
DEBUG: Requested variant macosx is not provided by port evolution-data-server.
DEBUG: No need to upgrade! evolution-data-server 2.26.3_0 >= evolution-data-server 2.26.3_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libgnomeui 2.24.2_0 exists in the ports tree
DEBUG: libgnomeui 2.24.2_0  is the latest installed
DEBUG: libgnomeui 2.24.2_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/libgnomeui
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant darwin is not provided by port libgnomeui.
DEBUG: Requested variant i386 is not provided by port libgnomeui.
DEBUG: Requested variant macosx is not provided by port libgnomeui.
DEBUG: No need to upgrade! libgnomeui 2.24.2_0 >= libgnomeui 2.24.2_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libbonoboui 2.24.2_0 exists in the ports tree
DEBUG: libbonoboui 2.24.2_0  is the latest installed
DEBUG: libbonoboui 2.24.2_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/libbonoboui
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port libbonoboui.
DEBUG: Requested variant i386 is not provided by port libbonoboui.
DEBUG: Requested variant macosx is not provided by port libbonoboui.
DEBUG: No need to upgrade! libbonoboui 2.24.2_0 >= libbonoboui 2.24.2_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gnome-vfs 2.24.2_0 exists in the ports tree
DEBUG: gnome-vfs 2.24.2_0  is the latest installed
DEBUG: gnome-vfs 2.24.2_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gnome-vfs
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gnome-vfs.
DEBUG: Requested variant i386 is not provided by port gnome-vfs.
DEBUG: Requested variant macosx is not provided by port gnome-vfs.
DEBUG: No need to upgrade! gnome-vfs 2.24.2_0 >= gnome-vfs 2.24.2_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: desktop-file-utils 0.15_1 exists in the ports tree
DEBUG: desktop-file-utils 0.15_1  is the latest installed
DEBUG: desktop-file-utils 0.15_1  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/desktop-file-utils
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port desktop-file-utils.
DEBUG: Requested variant i386 is not provided by port desktop-file-utils.
DEBUG: Requested variant macosx is not provided by port desktop-file-utils.
DEBUG: No need to upgrade! desktop-file-utils 0.15_1 >= desktop-file-utils 0.15_1
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: popt 1.15_0 exists in the ports tree
DEBUG: popt 1.15_0  is the latest installed
DEBUG: popt 1.15_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/popt
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port popt.
DEBUG: Requested variant i386 is not provided by port popt.
DEBUG: Requested variant macosx is not provided by port popt.
DEBUG: No need to upgrade! popt 1.15_0 >= popt 1.15_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gnome-mime-data 2.18.0_3 exists in the ports tree
DEBUG: gnome-mime-data 2.18.0_3  is the latest installed
DEBUG: gnome-mime-data 2.18.0_3  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gnome-mime-data
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port gnome-mime-data.
DEBUG: Requested variant i386 is not provided by port gnome-mime-data.
DEBUG: Requested variant macosx is not provided by port gnome-mime-data.
DEBUG: No need to upgrade! gnome-mime-data 2.18.0_3 >= gnome-mime-data 2.18.0_3
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libbonobo 2.24.2_0 exists in the ports tree
DEBUG: libbonobo 2.24.2_0  is the latest installed
DEBUG: libbonobo 2.24.2_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/libbonobo
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port libbonobo.
DEBUG: Requested variant i386 is not provided by port libbonobo.
DEBUG: Requested variant macosx is not provided by port libbonobo.
DEBUG: No need to upgrade! libbonobo 2.24.2_0 >= libbonobo 2.24.2_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libgnomecanvas 2.26.0_1 exists in the ports tree
DEBUG: libgnomecanvas 2.26.0_1  is the latest installed
DEBUG: libgnomecanvas 2.26.0_1  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/libgnomecanvas
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port libgnomecanvas.
DEBUG: Requested variant i386 is not provided by port libgnomecanvas.
DEBUG: Requested variant macosx is not provided by port libgnomecanvas.
DEBUG: No need to upgrade! libgnomecanvas 2.26.0_1 >= libgnomecanvas 2.26.0_1
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libart_lgpl 2.3.20_0 exists in the ports tree
DEBUG: libart_lgpl 2.3.20_0  is the latest installed
DEBUG: libart_lgpl 2.3.20_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libart_lgpl
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port libart_lgpl.
DEBUG: Requested variant i386 is not provided by port libart_lgpl.
DEBUG: Requested variant macosx is not provided by port libart_lgpl.
DEBUG: No need to upgrade! libart_lgpl 2.3.20_0 >= libart_lgpl 2.3.20_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libgnome 2.26.0_0 exists in the ports tree
DEBUG: libgnome 2.26.0_0  is the latest installed
DEBUG: libgnome 2.26.0_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/libgnome
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port libgnome.
DEBUG: Requested variant i386 is not provided by port libgnome.
DEBUG: Requested variant macosx is not provided by port libgnome.
DEBUG: No need to upgrade! libgnome 2.26.0_0 >= libgnome 2.26.0_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: esound 0.2.41_1 exists in the ports tree
DEBUG: esound 0.2.41_1  is the latest installed
DEBUG: esound 0.2.41_1  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/esound
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant darwin is not provided by port esound.
DEBUG: Requested variant i386 is not provided by port esound.
DEBUG: Requested variant macosx is not provided by port esound.
DEBUG: No need to upgrade! esound 0.2.41_1 >= esound 0.2.41_1
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: audiofile 0.2.6_2 exists in the ports tree
DEBUG: audiofile 0.2.6_2  is the latest installed
DEBUG: audiofile 0.2.6_2  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/audiofile
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port audiofile.
DEBUG: Requested variant i386 is not provided by port audiofile.
DEBUG: Requested variant macosx is not provided by port audiofile.
DEBUG: No need to upgrade! audiofile 0.2.6_2 >= audiofile 0.2.6_2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gnome-keyring 2.26.3_0 exists in the ports tree
DEBUG: gnome-keyring 2.26.3_0  is the latest installed
DEBUG: gnome-keyring 2.26.3_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gnome-keyring
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port gnome-keyring.
DEBUG: Requested variant i386 is not provided by port gnome-keyring.
DEBUG: Requested variant macosx is not provided by port gnome-keyring.
DEBUG: No need to upgrade! gnome-keyring 2.26.3_0 >= gnome-keyring 2.26.3_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libgcrypt 1.4.4_0 exists in the ports tree
DEBUG: libgcrypt 1.4.4_0  is the latest installed
DEBUG: libgcrypt 1.4.4_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libgcrypt
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port libgcrypt.
DEBUG: Requested variant i386 is not provided by port libgcrypt.
DEBUG: Requested variant macosx is not provided by port libgcrypt.
DEBUG: No need to upgrade! libgcrypt 1.4.4_0 >= libgcrypt 1.4.4_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libgpg-error 1.7_0 exists in the ports tree
DEBUG: libgpg-error 1.7_0  is the latest installed
DEBUG: libgpg-error 1.7_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libgpg-error
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port libgpg-error.
DEBUG: Requested variant i386 is not provided by port libgpg-error.
DEBUG: Requested variant macosx is not provided by port libgpg-error.
DEBUG: No need to upgrade! libgpg-error 1.7_0 >= libgpg-error 1.7_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libtasn1 2.2_0 exists in the ports tree
DEBUG: libtasn1 2.2_0  is the latest installed
DEBUG: libtasn1 2.2_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtasn1
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port libtasn1.
DEBUG: Requested variant i386 is not provided by port libtasn1.
DEBUG: Requested variant macosx is not provided by port libtasn1.
DEBUG: No need to upgrade! libtasn1 2.2_0 >= libtasn1 2.2_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libgweather 2.26.2.1_0 exists in the ports tree
DEBUG: libgweather 2.26.2.1_0  is the latest installed
DEBUG: libgweather 2.26.2.1_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/libgweather
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port libgweather.
DEBUG: Requested variant i386 is not provided by port libgweather.
DEBUG: Requested variant macosx is not provided by port libgweather.
DEBUG: No need to upgrade! libgweather 2.26.2.1_0 >= libgweather 2.26.2.1_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libsoup 2.28.2_0 exists in the ports tree
DEBUG: libsoup 2.28.2_0  is the latest installed
DEBUG: libsoup 2.28.2_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/libsoup
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port libsoup.
DEBUG: Requested variant i386 is not provided by port libsoup.
DEBUG: Requested variant macosx is not provided by port libsoup.
DEBUG: No need to upgrade! libsoup 2.28.2_0 >= libsoup 2.28.2_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gnutls 2.8.5_0 exists in the ports tree
DEBUG: gnutls 2.8.5_0  is the latest installed
DEBUG: gnutls 2.8.5_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gnutls
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant darwin is not provided by port gnutls.
DEBUG: Requested variant i386 is not provided by port gnutls.
DEBUG: Requested variant macosx is not provided by port gnutls.
DEBUG: No need to upgrade! gnutls 2.8.5_0 >= gnutls 2.8.5_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: opencdk 0.6.6_0 exists in the ports tree
DEBUG: opencdk 0.6.6_0  is the latest installed
DEBUG: opencdk 0.6.6_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/opencdk
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port opencdk.
DEBUG: Requested variant i386 is not provided by port opencdk.
DEBUG: Requested variant macosx is not provided by port opencdk.
DEBUG: No need to upgrade! opencdk 0.6.6_0 >= opencdk 0.6.6_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: lzo 1.08_0 exists in the ports tree
DEBUG: lzo 1.08_0  is the latest installed
DEBUG: lzo 1.08_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/lzo
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port lzo.
DEBUG: Requested variant i386 is not provided by port lzo.
DEBUG: Requested variant macosx is not provided by port lzo.
DEBUG: No need to upgrade! lzo 1.08_0 >= lzo 1.08_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libproxy 0.3.0_1 exists in the ports tree
DEBUG: libproxy 0.3.0_1  is the latest installed
DEBUG: libproxy 0.3.0_1  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/libproxy
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant darwin is not provided by port libproxy.
DEBUG: Requested variant i386 is not provided by port libproxy.
DEBUG: Requested variant macosx is not provided by port libproxy.
DEBUG: No need to upgrade! libproxy 0.3.0_1 >= libproxy 0.3.0_1
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: py25-gtk 2.16.0_0 exists in the ports tree
DEBUG: py25-gtk 2.16.0_0  is the latest installed
DEBUG: py25-gtk 2.16.0_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-gtk
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant darwin is not provided by port py25-gtk.
DEBUG: Requested variant i386 is not provided by port py25-gtk.
DEBUG: Requested variant macosx is not provided by port py25-gtk.
DEBUG: No need to upgrade! py25-gtk 2.16.0_0 >= py25-gtk 2.16.0_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: py25-cairo 1.8.2_0 exists in the ports tree
DEBUG: py25-cairo 1.8.2_0  is the latest installed
DEBUG: py25-cairo 1.8.2_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-cairo
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant darwin is not provided by port py25-cairo.
DEBUG: Requested variant i386 is not provided by port py25-cairo.
DEBUG: Requested variant macosx is not provided by port py25-cairo.
DEBUG: No need to upgrade! py25-cairo 1.8.2_0 >= py25-cairo 1.8.2_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: py25-numpy 1.4.0_0 exists in the ports tree
DEBUG: py25-numpy 1.4.0_0  is the latest installed
DEBUG: py25-numpy 1.4.0_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-numpy
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python25-1.0.tcl
DEBUG: not using configure, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port py25-numpy.
DEBUG: Requested variant i386 is not provided by port py25-numpy.
DEBUG: Requested variant macosx is not provided by port py25-numpy.
DEBUG: No need to upgrade! py25-numpy 1.4.0_0 >= py25-numpy 1.4.0_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: py25-nose 0.11.1_0 exists in the ports tree
DEBUG: py25-nose 0.11.1_0  is the latest installed
DEBUG: py25-nose 0.11.1_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-nose
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python25-1.0.tcl
DEBUG: not using configure, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port py25-nose.
DEBUG: Requested variant i386 is not provided by port py25-nose.
DEBUG: Requested variant macosx is not provided by port py25-nose.
DEBUG: No need to upgrade! py25-nose 0.11.1_0 >= py25-nose 0.11.1_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: py25-setuptools 0.6c11_0 exists in the ports tree
DEBUG: py25-setuptools 0.6c11_0  is the latest installed
DEBUG: py25-setuptools 0.6c11_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-setuptools
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python25-1.0.tcl
DEBUG: not using configure, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port py25-setuptools.
DEBUG: Requested variant i386 is not provided by port py25-setuptools.
DEBUG: Requested variant macosx is not provided by port py25-setuptools.
DEBUG: No need to upgrade! py25-setuptools 0.6c11_0 >= py25-setuptools 0.6c11_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: py25-gobject 2.18.0_0 exists in the ports tree
DEBUG: py25-gobject 2.18.0_0  is the latest installed
DEBUG: py25-gobject 2.18.0_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py25-gobject
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant darwin is not provided by port py25-gobject.
DEBUG: Requested variant i386 is not provided by port py25-gobject.
DEBUG: Requested variant macosx is not provided by port py25-gobject.
DEBUG: No need to upgrade! py25-gobject 2.18.0_0 >= py25-gobject 2.18.0_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libical 0.43_1 exists in the ports tree
DEBUG: libical 0.43_1  is the latest installed
DEBUG: libical 0.43_1  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libical
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port libical.
DEBUG: Requested variant i386 is not provided by port libical.
DEBUG: Requested variant macosx is not provided by port libical.
DEBUG: No need to upgrade! libical 0.43_1 >= libical 0.43_1
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: nss 3.12.5_0 exists in the ports tree
DEBUG: nss 3.12.5_0  is the latest installed
DEBUG: nss 3.12.5_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/nss
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port nss.
DEBUG: Requested variant i386 is not provided by port nss.
DEBUG: Requested variant macosx is not provided by port nss.
DEBUG: No need to upgrade! nss 3.12.5_0 >= nss 3.12.5_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: nspr 4.8.2_0 exists in the ports tree
DEBUG: nspr 4.8.2_0  is the latest installed
DEBUG: nspr 4.8.2_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/nspr
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port nspr.
DEBUG: Requested variant i386 is not provided by port nspr.
DEBUG: Requested variant macosx is not provided by port nspr.
DEBUG: No need to upgrade! nspr 4.8.2_0 >= nspr 4.8.2_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: librsvg 2.26.0_1 exists in the ports tree
DEBUG: librsvg 2.26.0_1  is the latest installed
DEBUG: librsvg 2.26.0_1  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/librsvg
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port librsvg.
DEBUG: Requested variant i386 is not provided by port librsvg.
DEBUG: Requested variant macosx is not provided by port librsvg.
DEBUG: No need to upgrade! librsvg 2.26.0_1 >= librsvg 2.26.0_1
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libcroco 0.6.2_0 exists in the ports tree
DEBUG: libcroco 0.6.2_0  is the latest installed
DEBUG: libcroco 0.6.2_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/libcroco
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port libcroco.
DEBUG: Requested variant i386 is not provided by port libcroco.
DEBUG: Requested variant macosx is not provided by port libcroco.
DEBUG: No need to upgrade! libcroco 0.6.2_0 >= libcroco 0.6.2_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libgsf 1.14.16_0 exists in the ports tree
DEBUG: libgsf 1.14.16_0  is the latest installed
DEBUG: libgsf 1.14.16_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/libgsf
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port libgsf.
DEBUG: Requested variant i386 is not provided by port libgsf.
DEBUG: Requested variant macosx is not provided by port libgsf.
DEBUG: No need to upgrade! libgsf 1.14.16_0 >= libgsf 1.14.16_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libwnck 2.26.2_0 exists in the ports tree
DEBUG: libwnck 2.26.2_0  is the latest installed
DEBUG: libwnck 2.26.2_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/libwnck
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port libwnck.
DEBUG: Requested variant i386 is not provided by port libwnck.
DEBUG: Requested variant macosx is not provided by port libwnck.
DEBUG: No need to upgrade! libwnck 2.26.2_0 >= libwnck 2.26.2_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libXres 1.0.4_0 exists in the ports tree
DEBUG: xorg-libXres 1.0.4_0  is the latest installed
DEBUG: xorg-libXres 1.0.4_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXres
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libXres.
DEBUG: Requested variant i386 is not provided by port xorg-libXres.
DEBUG: Requested variant macosx is not provided by port xorg-libXres.
DEBUG: No need to upgrade! xorg-libXres 1.0.4_0 >= xorg-libXres 1.0.4_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libxklavier 3.9_0 exists in the ports tree
DEBUG: libxklavier 3.9_0  is the latest installed
DEBUG: libxklavier 3.9_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/libxklavier
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port libxklavier.
DEBUG: Requested variant i386 is not provided by port libxklavier.
DEBUG: Requested variant macosx is not provided by port libxklavier.
DEBUG: No need to upgrade! libxklavier 3.9_0 >= libxklavier 3.9_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xorg-libxkbfile 1.0.6_0 exists in the ports tree
DEBUG: xorg-libxkbfile 1.0.6_0  is the latest installed
DEBUG: xorg-libxkbfile 1.0.6_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libxkbfile
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xorg-libxkbfile.
DEBUG: Requested variant i386 is not provided by port xorg-libxkbfile.
DEBUG: Requested variant macosx is not provided by port xorg-libxkbfile.
DEBUG: No need to upgrade! xorg-libxkbfile 1.0.6_0 >= xorg-libxkbfile 1.0.6_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: p5-xml-parser 2.36_0 exists in the ports tree
DEBUG: p5-xml-parser 2.36_0  is the latest installed
DEBUG: p5-xml-parser 2.36_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-xml-parser
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port p5-xml-parser.
DEBUG: Requested variant i386 is not provided by port p5-xml-parser.
DEBUG: Requested variant macosx is not provided by port p5-xml-parser.
DEBUG: No need to upgrade! p5-xml-parser 2.36_0 >= p5-xml-parser 2.36_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: pkgconfig 0.23_1 exists in the ports tree
DEBUG: pkgconfig 0.23_1  is the latest installed
DEBUG: pkgconfig 0.23_1  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port pkgconfig.
DEBUG: Requested variant i386 is not provided by port pkgconfig.
DEBUG: Requested variant macosx is not provided by port pkgconfig.
DEBUG: No need to upgrade! pkgconfig 0.23_1 >= pkgconfig 0.23_1
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gnome-doc-utils 0.16.1_1 exists in the ports tree
DEBUG: gnome-doc-utils 0.16.1_1  is the latest installed
DEBUG: gnome-doc-utils 0.16.1_1  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gnome-doc-utils
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port gnome-doc-utils.
DEBUG: Requested variant i386 is not provided by port gnome-doc-utils.
DEBUG: Requested variant macosx is not provided by port gnome-doc-utils.
DEBUG: No need to upgrade! gnome-doc-utils 0.16.1_1 >= gnome-doc-utils 0.16.1_1
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: docbook-xml 5.0_0 exists in the ports tree
DEBUG: docbook-xml 5.0_0  is the latest installed
DEBUG: docbook-xml 5.0_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port docbook-xml.
DEBUG: Requested variant i386 is not provided by port docbook-xml.
DEBUG: Requested variant macosx is not provided by port docbook-xml.
DEBUG: No need to upgrade! docbook-xml 5.0_0 >= docbook-xml 5.0_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: docbook-xsl 1.75.2_0 exists in the ports tree
DEBUG: docbook-xsl 1.75.2_0  is the latest installed
DEBUG: docbook-xsl 1.75.2_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xsl
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port docbook-xsl.
DEBUG: Requested variant i386 is not provided by port docbook-xsl.
DEBUG: Requested variant macosx is not provided by port docbook-xsl.
DEBUG: No need to upgrade! docbook-xsl 1.75.2_0 >= docbook-xsl 1.75.2_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: xmlcatmgr 2.2_1 exists in the ports tree
DEBUG: xmlcatmgr 2.2_1  is the latest installed
DEBUG: xmlcatmgr 2.2_1  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/xmlcatmgr
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port xmlcatmgr.
DEBUG: Requested variant i386 is not provided by port xmlcatmgr.
DEBUG: Requested variant macosx is not provided by port xmlcatmgr.
DEBUG: No need to upgrade! xmlcatmgr 2.2_1 >= xmlcatmgr 2.2_1
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: rarian 0.8.1_0 exists in the ports tree
DEBUG: rarian 0.8.1_0  is the latest installed
DEBUG: rarian 0.8.1_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/rarian
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port rarian.
DEBUG: Requested variant i386 is not provided by port rarian.
DEBUG: Requested variant macosx is not provided by port rarian.
DEBUG: No need to upgrade! rarian 0.8.1_0 >= rarian 0.8.1_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: iso-codes 3.12.1_0 exists in the ports tree
DEBUG: iso-codes 3.12.1_0  is the latest installed
DEBUG: iso-codes 3.12.1_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/iso-codes
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port iso-codes.
DEBUG: Requested variant i386 is not provided by port iso-codes.
DEBUG: Requested variant macosx is not provided by port iso-codes.
DEBUG: No need to upgrade! iso-codes 3.12.1_0 >= iso-codes 3.12.1_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: py26-libxml2 2.6.21_0 exists in the ports tree
DEBUG: py26-libxml2 2.6.21_0  is the latest installed
DEBUG: py26-libxml2 2.6.21_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-libxml2
DEBUG: OS darwin/10.2.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl
DEBUG: not using configure, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port py26-libxml2.
DEBUG: Requested variant i386 is not provided by port py26-libxml2.
DEBUG: Requested variant macosx is not provided by port py26-libxml2.
DEBUG: No need to upgrade! py26-libxml2 2.6.21_0 >= py26-libxml2 2.6.21_0
--->  Computing dependencies for gdm
DEBUG: Searching for dependency: gnome-panel
DEBUG: Found Dependency: receipt exists for gnome-panel
DEBUG: Searching for dependency: libxklavier
DEBUG: Found Dependency: receipt exists for libxklavier
DEBUG: Searching for dependency: p5-xml-parser
DEBUG: Found Dependency: receipt exists for p5-xml-parser
DEBUG: Searching for dependency: pkgconfig
DEBUG: Found Dependency: receipt exists for pkgconfig
DEBUG: Searching for dependency: gnome-doc-utils
DEBUG: Found Dependency: receipt exists for gnome-doc-utils
DEBUG: Executing org.macports.main (gdm)
DEBUG: Skipping completed org.macports.unarchive (gdm)
DEBUG: Skipping completed org.macports.fetch (gdm)
DEBUG: Skipping completed org.macports.checksum (gdm)
DEBUG: setting option extract.cmd to /usr/bin/bzip2
DEBUG: Skipping completed org.macports.extract (gdm)
DEBUG: Skipping completed org.macports.patch (gdm)
DEBUG: Skipping completed org.macports.configure (gdm)
--->  Building gdm
DEBUG: build phase started at Thu Feb  4 11:13:37 EST 2010
DEBUG: Executing org.macports.build (gdm)
DEBUG: Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_gdm/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6'
DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_gdm/work/gdm-2.26.1" && /usr/bin/make -j2 all'
/usr/bin/make  all-recursive
Making all in data
Making all in faces
make[3]: Nothing to be done for `all'.
Making all in greeter-autostart
make[3]: Nothing to be done for `all'.
Making all in pixmaps
Making all in 16x16
make[4]: Nothing to be done for `all'.
Making all in 32x32
make[4]: Nothing to be done for `all'.
Making all in 48x48
make[4]: Nothing to be done for `all'.
make[4]: Nothing to be done for `all-am'.
make[3]: Nothing to be done for `all-am'.
Making all in common
/usr/bin/make  all-am
make[3]: Nothing to be done for `all-am'.
Making all in daemon
/usr/bin/make  all-am
/usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I. -I..  -I. -I.. -I../common -DAUTHDIR=\"/opt/local/var/gdm\" -DBINDIR=\"/opt/local/bin\" -DDATADIR=\"/opt/local/share\" -DDMCONFDIR=\"/opt/local/etc/dm\" -DGDMCONFDIR=\"/opt/local/etc/gdm\" -DLIBDIR=\"/opt/local/lib\" -DLIBEXECDIR=\"/opt/local/libexec\" -DLOGDIR=\"/var/log/gdm\" -DSBINDIR=\"/opt/local/sbin\" -DGNOMELOCALEDIR=\""/opt/local/share/locale"\" -DGDM_XAUTH_DIR=\"/opt/local/var/run/gdm\" -DGDM_SESSION_DEFAULT_PATH=\"/usr/local/bin:/usr/bin:/bin\"  -I/opt/local/include/dbus-1.0 -I/opt/local/lib/dbus-1.0/include -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include   -I/opt/local/include   -Wall -Wmissing-prototypes  -DG_ENABLE_DEBUG -DLANG_CONFIG_FILE=\"/opt/local/etc/sysconfig/i18n\"  -I/opt/local/include  -pipe -O2 -arch x86_64 -MT gdm-session-worker.o -MD -MP -MF .deps/gdm-session-worker.Tpo -c -o gdm-session-worker.o gdm-session-worker.c
/usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I. -I..  -I. -I.. -I../common -DAUTHDIR=\"/opt/local/var/gdm\" -DBINDIR=\"/opt/local/bin\" -DDATADIR=\"/opt/local/share\" -DDMCONFDIR=\"/opt/local/etc/dm\" -DGDMCONFDIR=\"/opt/local/etc/gdm\" -DLIBDIR=\"/opt/local/lib\" -DLIBEXECDIR=\"/opt/local/libexec\" -DLOGDIR=\"/var/log/gdm\" -DSBINDIR=\"/opt/local/sbin\" -DGNOMELOCALEDIR=\""/opt/local/share/locale"\" -DGDM_XAUTH_DIR=\"/opt/local/var/run/gdm\" -DGDM_SESSION_DEFAULT_PATH=\"/usr/local/bin:/usr/bin:/bin\"  -I/opt/local/include/dbus-1.0 -I/opt/local/lib/dbus-1.0/include -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include   -I/opt/local/include   -Wall -Wmissing-prototypes  -DG_ENABLE_DEBUG -DLANG_CONFIG_FILE=\"/opt/local/etc/sysconfig/i18n\"  -I/opt/local/include  -pipe -O2 -arch x86_64 -MT gdm-display-store.o -MD -MP -MF .deps/gdm-display-store.Tpo -c -o gdm-display-store.o gdm-display-store.c
gdm-session-worker.c:35:26: error: pam/pam_appl.h: No such file or directory
gdm-session-worker.c:107: error: expected specifier-qualifier-list before 'pam_handle_t'
gdm-session-worker.c:151: warning: 'struct pam_response' declared inside parameter list
gdm-session-worker.c:151: warning: its scope is only this definition or declaration, which is probably not what you want
gdm-session-worker.c:151: warning: 'struct pam_message' declared inside parameter list
gdm-session-worker.c: In function 'open_ck_session':
gdm-session-worker.c:178: error: 'GdmSessionWorkerPrivate' has no member named 'x11_display_name'
gdm-session-worker.c:179: error: 'GdmSessionWorkerPrivate' has no member named 'x11_display_name'
gdm-session-worker.c:183: error: 'GdmSessionWorkerPrivate' has no member named 'hostname'
gdm-session-worker.c:184: error: 'GdmSessionWorkerPrivate' has no member named 'hostname'
gdm-session-worker.c:188: error: 'GdmSessionWorkerPrivate' has no member named 'display_device'
gdm-session-worker.c:189: error: 'GdmSessionWorkerPrivate' has no member named 'display_device'
gdm-session-worker.c:194: error: 'GdmSessionWorkerPrivate' has no member named 'username'
gdm-session-worker.c:205: error: 'GdmSessionWorkerPrivate' has no member named 'username'
gdm-session-worker.c: In function 'gdm_session_worker_get_username':
gdm-session-worker.c:571: error: 'GdmSessionWorkerPrivate' has no member named 'pam_handle'
gdm-session-worker.c:573: warning: implicit declaration of function 'pam_get_item'
gdm-session-worker.c:573: error: 'GdmSessionWorkerPrivate' has no member named 'pam_handle'
gdm-session-worker.c:573: error: 'PAM_USER' undeclared (first use in this function)
gdm-session-worker.c:573: error: (Each undeclared identifier is reported only once
gdm-session-worker.c:573: error: for each function it appears in.)
gdm-session-worker.c:573: error: 'PAM_SUCCESS' undeclared (first use in this function)
gdm-session-worker.c: In function 'attempt_to_load_user_settings':
gdm-session-worker.c:616: error: 'GdmSessionWorkerPrivate' has no member named 'user_settings'
gdm-session-worker.c: In function 'gdm_session_worker_update_username':
gdm-session-worker.c:633: error: 'GdmSessionWorkerPrivate' has no member named 'username'
gdm-session-worker.c:633: error: 'GdmSessionWorkerPrivate' has no member named 'username'
gdm-session-worker.c:638: error: 'GdmSessionWorkerPrivate' has no member named 'auditor'
gdm-session-worker.c:638: error: 'GdmSessionWorkerPrivate' has no member named 'username'
gdm-session-worker.c:640: error: 'GdmSessionWorkerPrivate' has no member named 'username'
gdm-session-worker.c:641: error: 'GdmSessionWorkerPrivate' has no member named 'username'
gdm-session-worker.c:642: error: 'GdmSessionWorkerPrivate' has no member named 'username'
gdm-session-worker.c:647: error: 'GdmSessionWorkerPrivate' has no member named 'username'
gdm-session-worker.c:648: error: 'GdmSessionWorkerPrivate' has no member named 'username'
gdm-session-worker.c:651: error: 'GdmSessionWorkerPrivate' has no member named 'connection'
gdm-session-worker.c:653: error: 'GdmSessionWorkerPrivate' has no member named 'username'
gdm-session-worker.c:660: error: 'GdmSessionWorkerPrivate' has no member named 'username'
gdm-session-worker.c:661: error: 'GdmSessionWorkerPrivate' has no member named 'user_settings'
gdm-session-worker.c:662: error: 'GdmSessionWorkerPrivate' has no member named 'username'
gdm-session-worker.c: In function 'send_question_method':
gdm-session-worker.c:701: error: 'GdmSessionWorkerPrivate' has no member named 'connection'
gdm-session-worker.c:709: error: 'GdmSessionWorkerPrivate' has no member named 'cancelled'
gdm-session-worker.c:711: error: 'GdmSessionWorkerPrivate' has no member named 'timed_out'
gdm-session-worker.c:728: error: 'GdmSessionWorkerPrivate' has no member named 'connection'
gdm-session-worker.c: In function 'gdm_session_worker_report_info':
gdm-session-worker.c:755: error: 'GdmSessionWorkerPrivate' has no member named 'connection'
gdm-session-worker.c: In function 'gdm_session_worker_report_problem':
gdm-session-worker.c:764: error: 'GdmSessionWorkerPrivate' has no member named 'connection'
gdm-session-worker.c: At top level:
gdm-session-worker.c:800: warning: 'struct pam_message' declared inside parameter list
gdm-session-worker.c: In function 'gdm_session_worker_process_pam_message':
gdm-session-worker.c:812: error: dereferencing pointer to incomplete type
gdm-session-worker.c:812: error: dereferencing pointer to incomplete type
gdm-session-worker.c:815: error: dereferencing pointer to incomplete type
gdm-session-worker.c:817: error: 'GdmSessionWorkerPrivate' has no member named 'cancelled'
gdm-session-worker.c:818: error: 'GdmSessionWorkerPrivate' has no member named 'timed_out'
gdm-session-worker.c:822: error: dereferencing pointer to incomplete type
gdm-session-worker.c:823: error: 'PAM_PROMPT_ECHO_ON' undeclared (first use in this function)
gdm-session-worker.c:826: error: 'PAM_PROMPT_ECHO_OFF' undeclared (first use in this function)
gdm-session-worker.c:829: error: 'PAM_TEXT_INFO' undeclared (first use in this function)
gdm-session-worker.c:832: error: 'PAM_ERROR_MSG' undeclared (first use in this function)
gdm-session-worker.c:840: error: 'GdmSessionWorkerPrivate' has no member named 'timed_out'
gdm-session-worker.c:841: error: 'GdmSessionWorkerPrivate' has no member named 'connection'
gdm-session-worker.c:842: error: 'GdmSessionWorkerPrivate' has no member named 'timed_out'
gdm-session-worker.c: At top level:
gdm-session-worker.c:870: warning: 'struct pam_response' declared inside parameter list
gdm-session-worker.c:870: warning: 'struct pam_message' declared inside parameter list
gdm-session-worker.c: In function 'gdm_session_worker_pam_new_messages_handler':
gdm-session-worker.c:878: error: 'PAM_CONV_ERR' undeclared (first use in this function)
gdm-session-worker.c:889: error: 'PAM_SUCCESS' undeclared (first use in this function)
gdm-session-worker.c:895: error: invalid application of 'sizeof' to incomplete type 'struct pam_response' 
gdm-session-worker.c:903: warning: passing argument 2 of 'gdm_session_worker_process_pam_message' from incompatible pointer type
gdm-session-worker.c:912: error: invalid use of undefined type 'struct pam_response'
gdm-session-worker.c:912: error: dereferencing pointer to incomplete type
gdm-session-worker.c:913: error: invalid use of undefined type 'struct pam_response'
gdm-session-worker.c:913: error: dereferencing pointer to incomplete type
gdm-session-worker.c:921: error: invalid use of undefined type 'struct pam_response'
gdm-session-worker.c:921: error: dereferencing pointer to incomplete type
gdm-session-worker.c:922: error: invalid use of undefined type 'struct pam_response'
gdm-session-worker.c:922: error: dereferencing pointer to incomplete type
gdm-session-worker.c:922: error: invalid use of undefined type 'struct pam_response'
gdm-session-worker.c:922: error: dereferencing pointer to incomplete type
gdm-session-worker.c:922: error: invalid use of undefined type 'struct pam_response'
gdm-session-worker.c:922: error: dereferencing pointer to incomplete type
gdm-session-worker.c:922: error: invalid use of undefined type 'struct pam_response'
gdm-session-worker.c:922: error: dereferencing pointer to incomplete type
gdm-session-worker.c:922: error: invalid use of undefined type 'struct pam_response'
gdm-session-worker.c:922: error: dereferencing pointer to incomplete type
gdm-session-worker.c:922: error: invalid use of undefined type 'struct pam_response'
gdm-session-worker.c:922: error: dereferencing pointer to incomplete type
gdm-session-worker.c:923: error: invalid use of undefined type 'struct pam_response'
gdm-session-worker.c:923: error: dereferencing pointer to incomplete type
gdm-session-worker.c:925: error: invalid use of undefined type 'struct pam_response'
gdm-session-worker.c:925: error: dereferencing pointer to incomplete type
gdm-session-worker.c:925: error: invalid use of undefined type 'struct pam_response'
gdm-session-worker.c:925: error: dereferencing pointer to incomplete type
gdm-session-worker.c:925: error: invalid use of undefined type 'struct pam_response'
gdm-session-worker.c:925: error: dereferencing pointer to incomplete type
gdm-session-worker.c:925: error: invalid use of undefined type 'struct pam_response'
gdm-session-worker.c:925: error: dereferencing pointer to incomplete type
gdm-session-worker.c:925: error: invalid use of undefined type 'struct pam_response'
gdm-session-worker.c:925: error: dereferencing pointer to incomplete type
gdm-session-worker.c:925: error: invalid use of undefined type 'struct pam_response'
gdm-session-worker.c:925: error: dereferencing pointer to incomplete type
gdm-session-worker.c:935: warning: implicit declaration of function 'pam_strerror'
gdm-session-worker.c:935: error: 'GdmSessionWorkerPrivate' has no member named 'pam_handle'
gdm-session-worker.c:935: warning: format '%s' expects type 'char *', but argument 5 has type 'int'
gdm-session-worker.c: In function 'gdm_session_worker_start_auditor':
gdm-session-worker.c:956: error: 'GdmSessionWorkerPrivate' has no member named 'auditor'
gdm-session-worker.c:956: error: 'GdmSessionWorkerPrivate' has no member named 'hostname'
gdm-session-worker.c:957: error: 'GdmSessionWorkerPrivate' has no member named 'display_device'
gdm-session-worker.c: In function 'gdm_session_worker_stop_auditor':
gdm-session-worker.c:964: error: 'GdmSessionWorkerPrivate' has no member named 'auditor'
gdm-session-worker.c:965: error: 'GdmSessionWorkerPrivate' has no member named 'auditor'
gdm-session-worker.c: In function 'gdm_session_worker_uninitialize_pam':
gdm-session-worker.c:974: error: 'GdmSessionWorkerPrivate' has no member named 'pam_handle'
gdm-session-worker.c:978: warning: implicit declaration of function 'pam_close_session'
gdm-session-worker.c:978: error: 'GdmSessionWorkerPrivate' has no member named 'pam_handle'
gdm-session-worker.c:979: error: 'GdmSessionWorkerPrivate' has no member named 'auditor'
gdm-session-worker.c:983: error: 'GdmSessionWorkerPrivate' has no member named 'pam_handle'
gdm-session-worker.c:983: error: 'PAM_USER' undeclared (first use in this function)
gdm-session-worker.c:983: error: 'PAM_SUCCESS' undeclared (first use in this function)
gdm-session-worker.c:984: error: 'GdmSessionWorkerPrivate' has no member named 'auditor'
gdm-session-worker.c:987: error: 'GdmSessionWorkerPrivate' has no member named 'auditor'
gdm-session-worker.c:989: error: 'GdmSessionWorkerPrivate' has no member named 'pam_handle'
gdm-session-worker.c:989: warning: passing argument 3 of 'gdm_session_auditor_report_login_failure' makes pointer from integer without a cast
gdm-session-worker.c:993: warning: implicit declaration of function 'pam_setcred'
gdm-session-worker.c:993: error: 'GdmSessionWorkerPrivate' has no member named 'pam_handle'
gdm-session-worker.c:993: error: 'PAM_DELETE_CRED' undeclared (first use in this function)
gdm-session-worker.c:996: warning: implicit declaration of function 'pam_end'
gdm-session-worker.c:996: error: 'GdmSessionWorkerPrivate' has no member named 'pam_handle'
gdm-session-worker.c:997: error: 'GdmSessionWorkerPrivate' has no member named 'pam_handle'
gdm-session-worker.c: In function 'gdm_session_worker_initialize_pam':
gdm-session-worker.c:1057: error: storage size of 'pam_conversation' isn't known
gdm-session-worker.c:1064: error: 'GdmSessionWorkerPrivate' has no member named 'pam_handle'
gdm-session-worker.c:1072: warning: implicit declaration of function 'pam_start'
gdm-session-worker.c:1075: error: 'GdmSessionWorkerPrivate' has no member named 'pam_handle'
gdm-session-worker.c:1077: error: 'PAM_SUCCESS' undeclared (first use in this function)
gdm-session-worker.c:1086: error: 'PAM_ABORT' undeclared (first use in this function)
gdm-session-worker.c:1087: error: 'PAM_BUF_ERR' undeclared (first use in this function)
gdm-session-worker.c:1088: error: 'PAM_SYSTEM_ERR' undeclared (first use in this function)
gdm-session-worker.c:1096: warning: implicit declaration of function 'pam_set_item'
gdm-session-worker.c:1096: error: 'GdmSessionWorkerPrivate' has no member named 'pam_handle'
gdm-session-worker.c:1096: error: 'PAM_USER_PROMPT' undeclared (first use in this function)
gdm-session-worker.c:1103: error: 'GdmSessionWorkerPrivate' has no member named 'pam_handle'
gdm-session-worker.c:1103: warning: format '%s' expects type 'char *', but argument 5 has type 'int'
gdm-session-worker.c:1110: error: 'GdmSessionWorkerPrivate' has no member named 'pam_handle'
gdm-session-worker.c:1110: error: 'PAM_RHOST' undeclared (first use in this function)
gdm-session-worker.c:1117: error: 'GdmSessionWorkerPrivate' has no member named 'pam_handle'
gdm-session-worker.c:1117: warning: format '%s' expects type 'char *', but argument 5 has type 'int'
gdm-session-worker.c:1124: error: 'GdmSessionWorkerPrivate' has no member named 'pam_handle'
gdm-session-worker.c:1124: error: 'PAM_TTY' undeclared (first use in this function)
gdm-session-worker.c:1132: error: 'GdmSessionWorkerPrivate' has no member named 'pam_handle'
gdm-session-worker.c:1132: warning: format '%s' expects type 'char *', but argument 5 has type 'int'
gdm-session-worker.c:1057: warning: unused variable 'pam_conversation'
gdm-session-worker.c: In function 'gdm_session_worker_authenticate_user':
gdm-session-worker.c:1190: error: 'PAM_DISALLOW_NULL_AUTHTOK' undeclared (first use in this function)
gdm-session-worker.c:1194: warning: implicit declaration of function 'pam_authenticate'
gdm-session-worker.c:1194: error: 'GdmSessionWorkerPrivate' has no member named 'pam_handle'
gdm-session-worker.c:1196: error: 'PAM_SUCCESS' undeclared (first use in this function)
gdm-session-worker.c:1197: error: 'GdmSessionWorkerPrivate' has no member named 'pam_handle'
gdm-session-worker.c:1197: warning: format '%s' expects type 'char *', but argument 5 has type 'int'
gdm-session-worker.c:1202: error: 'GdmSessionWorkerPrivate' has no member named 'pam_handle'
gdm-session-worker.c:1202: warning: format '%s' expects type 'char *', but argument 5 has type 'int'
gdm-session-worker.c: In function 'gdm_session_worker_authorize_user':
gdm-session-worker.c:1231: error: 'PAM_DISALLOW_NULL_AUTHTOK' undeclared (first use in this function)
gdm-session-worker.c:1236: warning: implicit declaration of function 'pam_acct_mgmt'
gdm-session-worker.c:1236: error: 'GdmSessionWorkerPrivate' has no member named 'pam_handle'
gdm-session-worker.c:1240: error: 'PAM_NEW_AUTHTOK_REQD' undeclared (first use in this function)
gdm-session-worker.c:1241: warning: implicit declaration of function 'pam_chauthtok'
gdm-session-worker.c:1241: error: 'GdmSessionWorkerPrivate' has no member named 'pam_handle'
gdm-session-worker.c:1241: error: 'PAM_CHANGE_EXPIRED_AUTHTOK' undeclared (first use in this function)
gdm-session-worker.c:1243: error: 'PAM_SUCCESS' undeclared (first use in this function)
gdm-session-worker.c:1244: error: 'GdmSessionWorkerPrivate' has no member named 'auditor'
gdm-session-worker.c:1246: error: 'GdmSessionWorkerPrivate' has no member named 'auditor'
gdm-session-worker.c:1251: error: 'GdmSessionWorkerPrivate' has no member named 'pam_handle'
gdm-session-worker.c:1251: warning: format '%s' expects type 'char *', but argument 4 has type 'int'
gdm-session-worker.c:1256: error: 'GdmSessionWorkerPrivate' has no member named 'pam_handle'
gdm-session-worker.c:1256: warning: format '%s' expects type 'char *', but argument 5 has type 'int'
gdm-session-worker.c: In function 'gdm_session_worker_set_environment_variable':
gdm-session-worker.c:1281: error: 'GdmSessionWorkerPrivate' has no member named 'environment'
gdm-session-worker.c: In function 'gdm_session_worker_update_environment_from_passwd_info':
gdm-session-worker.c:1293: error: 'GdmSessionWorkerPrivate' has no member named 'username'
gdm-session-worker.c:1294: error: 'GdmSessionWorkerPrivate' has no member named 'username'
gdm-session-worker.c:1295: error: 'GdmSessionWorkerPrivate' has no member named 'username'
gdm-session-worker.c: In function 'gdm_session_worker_environment_variable_is_set':
gdm-session-worker.c:1304: error: 'GdmSessionWorkerPrivate' has no member named 'environment'
gdm-session-worker.c: In function '_change_user':
gdm-session-worker.c:1327: error: 'GdmSessionWorkerPrivate' has no member named 'uid'
gdm-session-worker.c:1333: error: 'GdmSessionWorkerPrivate' has no member named 'username'
gdm-session-worker.c: In function 'gdm_session_worker_accredit_user':
gdm-session-worker.c:1433: error: 'GdmSessionWorkerPrivate' has no member named 'username'
gdm-session-worker.c:1435: error: 'PAM_USER_UNKNOWN' undeclared (first use in this function)
gdm-session-worker.c:1447: error: 'GdmSessionWorkerPrivate' has no member named 'username'
gdm-session-worker.c:1481: error: 'PAM_SYSTEM_ERR' undeclared (first use in this function)
gdm-session-worker.c:1488: error: 'GdmSessionWorkerPrivate' has no member named 'pam_handle'
gdm-session-worker.c:1488: error: 'GdmSessionWorkerPrivate' has no member named 'cred_flags'
gdm-session-worker.c:1490: error: 'PAM_SUCCESS' undeclared (first use in this function)
gdm-session-worker.c:1495: error: 'GdmSessionWorkerPrivate' has no member named 'pam_handle'
gdm-session-worker.c:1495: warning: format '%s' expects type 'char *', but argument 5 has type 'int'
gdm-session-worker.c:1505: error: 'GdmSessionWorkerPrivate' has no member named 'auditor'
gdm-session-worker.c: In function 'gdm_session_worker_update_environment_from_pam':
gdm-session-worker.c:1520: warning: implicit declaration of function 'pam_getenvlist'
gdm-session-worker.c:1520: error: 'GdmSessionWorkerPrivate' has no member named 'pam_handle'
gdm-session-worker.c:1520: warning: assignment makes pointer from integer without a cast
gdm-session-worker.c: In function 'gdm_session_worker_get_environment':
gdm-session-worker.c:1560: error: 'GdmSessionWorkerPrivate' has no member named 'environment'
gdm-session-worker.c: In function 'session_worker_child_watch':
gdm-session-worker.c:1603: error: 'GdmSessionWorkerPrivate' has no member named 'connection'
gdm-session-worker.c:1609: error: 'GdmSessionWorkerPrivate' has no member named 'connection'
gdm-session-worker.c:1620: error: 'PAM_SUCCESS' undeclared (first use in this function)
gdm-session-worker.c:1622: error: 'GdmSessionWorkerPrivate' has no member named 'child_pid'
gdm-session-worker.c: In function 'gdm_session_worker_watch_child':
gdm-session-worker.c:1629: error: 'GdmSessionWorkerPrivate' has no member named 'child_watch_id'
gdm-session-worker.c:1629: error: 'GdmSessionWorkerPrivate' has no member named 'child_pid'
gdm-session-worker.c: In function '_save_user_settings':
gdm-session-worker.c:1715: error: 'GdmSessionWorkerPrivate' has no member named 'user_settings'
gdm-session-worker.c:1720: error: 'GdmSessionWorkerPrivate' has no member named 'user_settings'
gdm-session-worker.c: In function 'gdm_session_worker_start_user_session':
gdm-session-worker.c:1740: error: 'GdmSessionWorkerPrivate' has no member named 'arguments'
gdm-session-worker.c:1743: error: 'PAM_SUCCESS' undeclared (first use in this function)
gdm-session-worker.c:1752: error: 'PAM_ABORT' undeclared (first use in this function)
gdm-session-worker.c:1761: error: 'GdmSessionWorkerPrivate' has no member named 'uid'
gdm-session-worker.c:1776: error: 'GdmSessionWorkerPrivate' has no member named 'environment'
gdm-session-worker.c:1794: error: 'GdmSessionWorkerPrivate' has no member named 'arguments'
gdm-session-worker.c:1795: error: 'GdmSessionWorkerPrivate' has no member named 'arguments'
gdm-session-worker.c:1799: error: 'GdmSessionWorkerPrivate' has no member named 'arguments'
gdm-session-worker.c:1807: error: 'GdmSessionWorkerPrivate' has no member named 'child_pid'
gdm-session-worker.c: In function 'gdm_session_worker_open_user_session':
gdm-session-worker.c:1835: warning: implicit declaration of function 'pam_open_session'
gdm-session-worker.c:1835: error: 'GdmSessionWorkerPrivate' has no member named 'pam_handle'
gdm-session-worker.c:1837: error: 'PAM_SUCCESS' undeclared (first use in this function)
gdm-session-worker.c:1841: error: 'GdmSessionWorkerPrivate' has no member named 'pam_handle'
gdm-session-worker.c:1841: warning: format '%s' expects type 'char *', but argument 5 has type 'int'
gdm-session-worker.c:1854: error: 'GdmSessionWorkerPrivate' has no member named 'auditor'
gdm-session-worker.c: In function 'gdm_session_worker_set_server_address':
gdm-session-worker.c:1863: error: 'GdmSessionWorkerPrivate' has no member named 'server_address'
gdm-session-worker.c:1864: error: 'GdmSessionWorkerPrivate' has no member named 'server_address'
gdm-session-worker.c: In function 'gdm_session_worker_get_property':
gdm-session-worker.c:1899: error: 'GdmSessionWorkerPrivate' has no member named 'server_address'
gdm-session-worker.c: In function 'gdm_session_worker_set_session_name':
gdm-session-worker.c:1935: error: 'GdmSessionWorkerPrivate' has no member named 'user_settings'
gdm-session-worker.c: In function 'gdm_session_worker_set_language_name':
gdm-session-worker.c:1965: error: 'GdmSessionWorkerPrivate' has no member named 'user_settings'
gdm-session-worker.c: In function 'gdm_session_worker_set_layout_name':
gdm-session-worker.c:1973: error: 'GdmSessionWorkerPrivate' has no member named 'user_settings'
gdm-session-worker.c: In function 'on_saved_language_name_read':
gdm-session-worker.c:2026: error: 'GdmSessionWorkerPrivate' has no member named 'user_settings'
gdm-session-worker.c:2027: error: 'GdmSessionWorkerPrivate' has no member named 'connection'
gdm-session-worker.c: In function 'on_saved_layout_name_read':
gdm-session-worker.c:2038: error: 'GdmSessionWorkerPrivate' has no member named 'user_settings'
gdm-session-worker.c:2039: error: 'GdmSessionWorkerPrivate' has no member named 'connection'
gdm-session-worker.c: In function 'on_saved_session_name_read':
gdm-session-worker.c:2050: error: 'GdmSessionWorkerPrivate' has no member named 'user_settings'
gdm-session-worker.c:2051: error: 'GdmSessionWorkerPrivate' has no member named 'connection'
gdm-session-worker.c: In function 'do_setup':
gdm-session-worker.c:2063: error: 'GdmSessionWorkerPrivate' has no member named 'user_settings'
gdm-session-worker.c:2065: error: 'GdmSessionWorkerPrivate' has no member named 'user_settings'
gdm-session-worker.c:2070: error: 'GdmSessionWorkerPrivate' has no member named 'user_settings'
gdm-session-worker.c:2075: error: 'GdmSessionWorkerPrivate' has no member named 'user_settings'
gdm-session-worker.c:2090: error: 'GdmSessionWorkerPrivate' has no member named 'username'
gdm-session-worker.c:2092: error: 'GdmSessionWorkerPrivate' has no member named 'username'
gdm-session-worker.c:2097: error: 'GdmSessionWorkerPrivate' has no member named 'service'
gdm-session-worker.c:2098: error: 'GdmSessionWorkerPrivate' has no member named 'username'
gdm-session-worker.c:2099: error: 'GdmSessionWorkerPrivate' has no member named 'hostname'
gdm-session-worker.c:2100: error: 'GdmSessionWorkerPrivate' has no member named 'x11_display_name'
gdm-session-worker.c:2101: error: 'GdmSessionWorkerPrivate' has no member named 'x11_authority_file'
gdm-session-worker.c:2102: error: 'GdmSessionWorkerPrivate' has no member named 'display_device'
gdm-session-worker.c:2105: error: 'GdmSessionWorkerPrivate' has no member named 'connection'
gdm-session-worker.c:2112: error: 'GdmSessionWorkerPrivate' has no member named 'connection'
gdm-session-worker.c: In function 'do_authenticate':
gdm-session-worker.c:2125: error: 'GdmSessionWorkerPrivate' has no member named 'password_is_required'
gdm-session-worker.c:2129: error: 'GdmSessionWorkerPrivate' has no member named 'connection'
gdm-session-worker.c:2142: error: 'GdmSessionWorkerPrivate' has no member named 'connection'
gdm-session-worker.c: In function 'do_authorize':
gdm-session-worker.c:2155: error: 'GdmSessionWorkerPrivate' has no member named 'password_is_required'
gdm-session-worker.c:2158: error: 'GdmSessionWorkerPrivate' has no member named 'connection'
gdm-session-worker.c:2165: error: 'GdmSessionWorkerPrivate' has no member named 'connection'
gdm-session-worker.c: In function 'do_accredit':
gdm-session-worker.c:2180: error: 'GdmSessionWorkerPrivate' has no member named 'connection'
gdm-session-worker.c:2187: error: 'GdmSessionWorkerPrivate' has no member named 'connection'
gdm-session-worker.c: In function 'do_open_session':
gdm-session-worker.c:2199: error: 'GdmSessionWorkerPrivate' has no member named 'connection'
gdm-session-worker.c: In function 'do_start_session':
gdm-session-worker.c:2218: error: 'GdmSessionWorkerPrivate' has no member named 'connection'
gdm-session-worker.c:2225: error: 'GdmSessionWorkerPrivate' has no member named 'connection'
gdm-session-worker.c:2227: error: 'GdmSessionWorkerPrivate' has no member named 'child_pid'
gdm-session-worker.c: In function 'state_change_idle':
gdm-session-worker.c:2276: error: 'GdmSessionWorkerPrivate' has no member named 'state_change_idle_id'
gdm-session-worker.c: In function 'queue_state_change':
gdm-session-worker.c:2307: error: 'GdmSessionWorkerPrivate' has no member named 'state_change_idle_id'
gdm-session-worker.c:2311: error: 'GdmSessionWorkerPrivate' has no member named 'state_change_idle_id'
gdm-session-worker.c: In function 'on_start_program':
gdm-session-worker.c:2334: error: 'GdmSessionWorkerPrivate' has no member named 'arguments'
gdm-session-worker.c:2335: error: 'GdmSessionWorkerPrivate' has no member named 'arguments'
gdm-session-worker.c:2336: error: 'GdmSessionWorkerPrivate' has no member named 'arguments'
gdm-session-worker.c:2340: error: 'GdmSessionWorkerPrivate' has no member named 'arguments'
gdm-session-worker.c: In function 'on_setup':
gdm-session-worker.c:2377: error: 'GdmSessionWorkerPrivate' has no member named 'service'
gdm-session-worker.c:2378: error: 'GdmSessionWorkerPrivate' has no member named 'x11_display_name'
gdm-session-worker.c:2379: error: 'GdmSessionWorkerPrivate' has no member named 'x11_authority_file'
gdm-session-worker.c:2380: error: 'GdmSessionWorkerPrivate' has no member named 'display_device'
gdm-session-worker.c:2381: error: 'GdmSessionWorkerPrivate' has no member named 'hostname'
gdm-session-worker.c:2382: error: 'GdmSessionWorkerPrivate' has no member named 'username'
gdm-session-worker.c: In function 'on_setup_for_user':
gdm-session-worker.c:2418: error: 'GdmSessionWorkerPrivate' has no member named 'service'
gdm-session-worker.c:2419: error: 'GdmSessionWorkerPrivate' has no member named 'x11_display_name'
gdm-session-worker.c:2420: error: 'GdmSessionWorkerPrivate' has no member named 'x11_authority_file'
gdm-session-worker.c:2421: error: 'GdmSessionWorkerPrivate' has no member named 'display_device'
gdm-session-worker.c:2422: error: 'GdmSessionWorkerPrivate' has no member named 'hostname'
gdm-session-worker.c:2423: error: 'GdmSessionWorkerPrivate' has no member named 'username'
gdm-session-worker.c: In function 'on_establish_credentials':
gdm-session-worker.c:2455: error: 'GdmSessionWorkerPrivate' has no member named 'cred_flags'
gdm-session-worker.c:2455: error: 'PAM_ESTABLISH_CRED' undeclared (first use in this function)
gdm-session-worker.c: In function 'on_refresh_credentials':
gdm-session-worker.c:2485: error: 'GdmSessionWorkerPrivate' has no member named 'pam_handle'
gdm-session-worker.c:2485: error: 'PAM_REFRESH_CRED' undeclared (first use in this function)
gdm-session-worker.c:2486: error: 'PAM_SUCCESS' undeclared (first use in this function)
gdm-session-worker.c:2487: error: 'GdmSessionWorkerPrivate' has no member named 'pam_handle'
gdm-session-worker.c:2487: warning: format '%s' expects type 'char *', but argument 4 has type 'int'
gdm-session-worker.c: In function 'worker_dbus_filter_function':
gdm-session-worker.c:2564: error: 'GdmSessionWorkerPrivate' has no member named 'connection'
gdm-session-worker.c: In function 'gdm_session_worker_constructor':
gdm-session-worker.c:2589: error: 'GdmSessionWorkerPrivate' has no member named 'server_address'
gdm-session-worker.c:2592: error: 'GdmSessionWorkerPrivate' has no member named 'connection'
gdm-session-worker.c:2592: error: 'GdmSessionWorkerPrivate' has no member named 'server_address'
gdm-session-worker.c:2593: error: 'GdmSessionWorkerPrivate' has no member named 'connection'
gdm-session-worker.c:2603: error: 'GdmSessionWorkerPrivate' has no member named 'connection'
gdm-session-worker.c:2604: error: 'GdmSessionWorkerPrivate' has no member named 'connection'
gdm-session-worker.c:2606: error: 'GdmSessionWorkerPrivate' has no member named 'connection'
gdm-session-worker.c: In function 'gdm_session_worker_init':
gdm-session-worker.c:2640: error: 'GdmSessionWorkerPrivate' has no member named 'environment'
gdm-session-worker.c: In function 'gdm_session_worker_unwatch_child':
gdm-session-worker.c:2649: error: 'GdmSessionWorkerPrivate' has no member named 'child_watch_id'
gdm-session-worker.c:2652: error: 'GdmSessionWorkerPrivate' has no member named 'child_watch_id'
gdm-session-worker.c:2653: error: 'GdmSessionWorkerPrivate' has no member named 'child_watch_id'
gdm-session-worker.c: In function 'gdm_session_worker_finalize':
gdm-session-worker.c:2671: error: 'GdmSessionWorkerPrivate' has no member named 'username'
gdm-session-worker.c:2672: error: 'GdmSessionWorkerPrivate' has no member named 'username'
gdm-session-worker.c:2673: error: 'GdmSessionWorkerPrivate' has no member named 'username'
gdm-session-worker.c:2676: error: 'GdmSessionWorkerPrivate' has no member named 'arguments'
gdm-session-worker.c:2677: error: 'GdmSessionWorkerPrivate' has no member named 'arguments'
gdm-session-worker.c:2678: error: 'GdmSessionWorkerPrivate' has no member named 'arguments'
gdm-session-worker.c:2681: error: 'GdmSessionWorkerPrivate' has no member named 'environment'
gdm-session-worker.c:2682: error: 'GdmSessionWorkerPrivate' has no member named 'environment'
gdm-session-worker.c:2683: error: 'GdmSessionWorkerPrivate' has no member named 'environment'
make[3]: *** [gdm-session-worker.o] Error 1
make[3]: *** Waiting for unfinished jobs....
mv -f .deps/gdm-display-store.Tpo .deps/gdm-display-store.Po
make[2]: *** [all] Error 2
make[1]: *** [all-recursive] Error 1
make: *** [all] Error 2
shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_gdm/work/gdm-2.26.1" && /usr/bin/make -j2 all " returned error 2
Error: Target org.macports.build returned: shell command failed
DEBUG: Backtrace: shell command failed
    while executing
"command_exec build"
    (procedure "portbuild::build_main" line 9)
    invoked from within
"$procedure $targetname"
Warning: the following items did not execute (for gdm): org.macports.activate org.macports.build org.macports.destroot org.macports.archive org.macports.install
Log for gdm is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_gdm/main.log
Error: Status 1 encountered during processing.
To report a bug, see <http://guide.macports.org/#project.tickets>