DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/stardict DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/stardict DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port stardict. DEBUG: Requested variant i386 is not provided by port stardict. DEBUG: Requested variant macosx is not provided by port stardict. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/gtk2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gtk2 2.18.8_0 exists in the ports tree DEBUG: gtk2 2.18.8_0 +x11 is the latest installed DEBUG: gtk2 2.18.8_0 +x11 is active DEBUG: Merging existing variants x11 into variants DEBUG: new fully merged portvariants: x11 + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/gtk2 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port gtk2. DEBUG: Requested variant i386 is not provided by port gtk2. DEBUG: Requested variant macosx is not provided by port gtk2. DEBUG: Executing variant x11 provides x11 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig DEBUG: epoch: in tree: 0 installed: 0 DEBUG: pkgconfig 0.23_1 exists in the ports tree DEBUG: pkgconfig 0.23_1 is the latest installed DEBUG: pkgconfig 0.23_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port pkgconfig. DEBUG: Requested variant i386 is not provided by port pkgconfig. DEBUG: Requested variant macosx is not provided by port pkgconfig. DEBUG: No need to upgrade! pkgconfig 0.23_1 >= pkgconfig 0.23_1 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/cairo DEBUG: epoch: in tree: 0 installed: 0 DEBUG: cairo 1.8.10_0 exists in the ports tree DEBUG: cairo 1.8.10_0 +macosx is the latest installed DEBUG: cairo 1.8.10_0 +macosx is active DEBUG: Merging existing variants macosx into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/cairo DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port cairo. DEBUG: Requested variant i386 is not provided by port cairo. DEBUG: Executing variant macosx provides macosx DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpixman DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libpixman 0.16.6_0 exists in the ports tree DEBUG: libpixman 0.16.6_0 is the latest installed DEBUG: libpixman 0.16.6_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpixman DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port libpixman. DEBUG: Requested variant i386 is not provided by port libpixman. DEBUG: Requested variant macosx is not provided by port libpixman. DEBUG: No need to upgrade! libpixman 0.16.6_0 >= libpixman 0.16.6_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xrender 0.9.5_0 exists in the ports tree DEBUG: xrender 0.9.5_0 is the latest installed DEBUG: xrender 0.9.5_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xrender. DEBUG: Requested variant i386 is not provided by port xrender. DEBUG: Requested variant macosx is not provided by port xrender. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libX11 1.3.3_0 exists in the ports tree DEBUG: xorg-libX11 1.3.3_0 is the latest installed DEBUG: xorg-libX11 1.3.3_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libX11. DEBUG: Requested variant i386 is not provided by port xorg-libX11. DEBUG: Requested variant macosx is not provided by port xorg-libX11. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-util-macros DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-util-macros 1.6.1_0 exists in the ports tree DEBUG: xorg-util-macros 1.6.1_0 is the latest installed DEBUG: xorg-util-macros 1.6.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-util-macros DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-util-macros. DEBUG: Requested variant i386 is not provided by port xorg-util-macros. DEBUG: Requested variant macosx is not provided by port xorg-util-macros. DEBUG: No need to upgrade! xorg-util-macros 1.6.1_0 >= xorg-util-macros 1.6.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xtrans DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-xtrans 1.2.5_0 exists in the ports tree DEBUG: xorg-xtrans 1.2.5_0 is the latest installed DEBUG: xorg-xtrans 1.2.5_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xtrans DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-xtrans. DEBUG: Requested variant i386 is not provided by port xorg-xtrans. DEBUG: Requested variant macosx is not provided by port xorg-xtrans. DEBUG: No need to upgrade! xorg-xtrans 1.2.5_0 >= xorg-xtrans 1.2.5_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-bigreqsproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-bigreqsproto 1.1.0_0 exists in the ports tree DEBUG: xorg-bigreqsproto 1.1.0_0 is the latest installed DEBUG: xorg-bigreqsproto 1.1.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-bigreqsproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-bigreqsproto. DEBUG: Requested variant i386 is not provided by port xorg-bigreqsproto. DEBUG: Requested variant macosx is not provided by port xorg-bigreqsproto. DEBUG: No need to upgrade! xorg-bigreqsproto 1.1.0_0 >= xorg-bigreqsproto 1.1.0_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcmiscproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-xcmiscproto 1.2.0_0 exists in the ports tree DEBUG: xorg-xcmiscproto 1.2.0_0 is the latest installed DEBUG: xorg-xcmiscproto 1.2.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcmiscproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-xcmiscproto. DEBUG: Requested variant i386 is not provided by port xorg-xcmiscproto. DEBUG: Requested variant macosx is not provided by port xorg-xcmiscproto. DEBUG: No need to upgrade! xorg-xcmiscproto 1.2.0_0 >= xorg-xcmiscproto 1.2.0_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-xextproto 7.1.1_0 exists in the ports tree DEBUG: xorg-xextproto 7.1.1_0 is the latest installed DEBUG: xorg-xextproto 7.1.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-xextproto. DEBUG: Requested variant i386 is not provided by port xorg-xextproto. DEBUG: Requested variant macosx is not provided by port xorg-xextproto. DEBUG: No need to upgrade! xorg-xextproto 7.1.1_0 >= xorg-xextproto 7.1.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xf86bigfontproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-xf86bigfontproto 1.2.0_0 exists in the ports tree DEBUG: xorg-xf86bigfontproto 1.2.0_0 is the latest installed DEBUG: xorg-xf86bigfontproto 1.2.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xf86bigfontproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-xf86bigfontproto. DEBUG: Requested variant i386 is not provided by port xorg-xf86bigfontproto. DEBUG: Requested variant macosx is not provided by port xorg-xf86bigfontproto. DEBUG: No need to upgrade! xorg-xf86bigfontproto 1.2.0_0 >= xorg-xf86bigfontproto 1.2.0_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-inputproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-inputproto 2.0_0 exists in the ports tree DEBUG: xorg-inputproto 2.0_0 is the latest installed DEBUG: xorg-inputproto 2.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-inputproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-inputproto. DEBUG: Requested variant i386 is not provided by port xorg-inputproto. DEBUG: Requested variant macosx is not provided by port xorg-inputproto. DEBUG: No need to upgrade! xorg-inputproto 2.0_0 >= xorg-inputproto 2.0_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXdmcp 1.0.3_0 exists in the ports tree DEBUG: xorg-libXdmcp 1.0.3_0 is the latest installed DEBUG: xorg-libXdmcp 1.0.3_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXdmcp. DEBUG: Requested variant i386 is not provided by port xorg-libXdmcp. DEBUG: Requested variant macosx is not provided by port xorg-libXdmcp. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-xproto 7.0.16_0 exists in the ports tree DEBUG: xorg-xproto 7.0.16_0 is the latest installed DEBUG: xorg-xproto 7.0.16_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-xproto. DEBUG: Requested variant i386 is not provided by port xorg-xproto. DEBUG: Requested variant macosx is not provided by port xorg-xproto. DEBUG: No need to upgrade! xorg-xproto 7.0.16_0 >= xorg-xproto 7.0.16_0 DEBUG: No need to upgrade! xorg-libXdmcp 1.0.3_0 >= xorg-libXdmcp 1.0.3_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXau 1.0.5_0 exists in the ports tree DEBUG: xorg-libXau 1.0.5_0 is the latest installed DEBUG: xorg-libXau 1.0.5_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXau. DEBUG: Requested variant i386 is not provided by port xorg-libXau. DEBUG: Requested variant macosx is not provided by port xorg-libXau. DEBUG: No need to upgrade! xorg-libXau 1.0.5_0 >= xorg-libXau 1.0.5_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-kbproto 1.0.4_0 exists in the ports tree DEBUG: xorg-kbproto 1.0.4_0 is the latest installed DEBUG: xorg-kbproto 1.0.4_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-kbproto. DEBUG: Requested variant i386 is not provided by port xorg-kbproto. DEBUG: Requested variant macosx is not provided by port xorg-kbproto. DEBUG: No need to upgrade! xorg-kbproto 1.0.4_0 >= xorg-kbproto 1.0.4_0 DEBUG: No need to upgrade! xorg-libX11 1.3.3_0 >= xorg-libX11 1.3.3_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-renderproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-renderproto 0.11_0 exists in the ports tree DEBUG: xorg-renderproto 0.11_0 is the latest installed DEBUG: xorg-renderproto 0.11_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-renderproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-renderproto. DEBUG: Requested variant i386 is not provided by port xorg-renderproto. DEBUG: Requested variant macosx is not provided by port xorg-renderproto. DEBUG: No need to upgrade! xorg-renderproto 0.11_0 >= xorg-renderproto 0.11_0 DEBUG: No need to upgrade! xrender 0.9.5_0 >= xrender 0.9.5_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig DEBUG: epoch: in tree: 0 installed: 0 DEBUG: fontconfig 2.8.0_0 exists in the ports tree DEBUG: fontconfig 2.8.0_0 +macosx is the latest installed DEBUG: fontconfig 2.8.0_0 +macosx is active DEBUG: Merging existing variants macosx into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port fontconfig. DEBUG: Requested variant i386 is not provided by port fontconfig. DEBUG: Executing variant macosx provides macosx DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libiconv 1.13.1_0 exists in the ports tree DEBUG: libiconv 1.13.1_0 is the latest installed DEBUG: libiconv 1.13.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port libiconv. DEBUG: Requested variant i386 is not provided by port libiconv. DEBUG: Requested variant macosx is not provided by port libiconv. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gperf 3.0.4_0 exists in the ports tree DEBUG: gperf 3.0.4_0 is the latest installed DEBUG: gperf 3.0.4_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port gperf. DEBUG: Requested variant i386 is not provided by port gperf. DEBUG: Requested variant macosx is not provided by port gperf. DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0 DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat DEBUG: epoch: in tree: 0 installed: 0 DEBUG: expat 2.0.1_0 exists in the ports tree DEBUG: expat 2.0.1_0 is the latest installed DEBUG: expat 2.0.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port expat. DEBUG: Requested variant i386 is not provided by port expat. DEBUG: Requested variant macosx is not provided by port expat. DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype DEBUG: epoch: in tree: 0 installed: 0 DEBUG: freetype 2.3.12_0 exists in the ports tree DEBUG: freetype 2.3.12_0 +macosx is the latest installed DEBUG: freetype 2.3.12_0 +macosx is active DEBUG: Merging existing variants macosx into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port freetype. DEBUG: Requested variant i386 is not provided by port freetype. DEBUG: Executing variant macosx provides macosx DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib DEBUG: epoch: in tree: 0 installed: 0 DEBUG: zlib 1.2.4_1 exists in the ports tree DEBUG: zlib 1.2.4_1 is the latest installed DEBUG: zlib 1.2.4_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port zlib. DEBUG: Requested variant i386 is not provided by port zlib. DEBUG: Requested variant macosx is not provided by port zlib. DEBUG: No need to upgrade! zlib 1.2.4_1 >= zlib 1.2.4_1 DEBUG: No need to upgrade! freetype 2.3.12_0 >= freetype 2.3.12_0 DEBUG: No need to upgrade! fontconfig 2.8.0_0 >= fontconfig 2.8.0_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libpng 1.2.43_0 exists in the ports tree DEBUG: libpng 1.2.43_0 is the latest installed DEBUG: libpng 1.2.43_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port libpng. DEBUG: Requested variant i386 is not provided by port libpng. DEBUG: Requested variant macosx is not provided by port libpng. DEBUG: No need to upgrade! libpng 1.2.43_0 >= libpng 1.2.43_0 DEBUG: No need to upgrade! cairo 1.8.10_0 >= cairo 1.8.10_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/glib2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: glib2 2.22.5_0 exists in the ports tree DEBUG: glib2 2.22.5_0 +darwin is the latest installed DEBUG: glib2 2.22.5_0 +darwin is active DEBUG: Merging existing variants darwin into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/glib2 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: adding the default universal variant DEBUG: Requested variant i386 is not provided by port glib2. DEBUG: Requested variant macosx is not provided by port glib2. DEBUG: Executing variant darwin provides darwin DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf DEBUG: epoch: in tree: 0 installed: 0 DEBUG: autoconf 2.65_1 exists in the ports tree DEBUG: autoconf 2.65_1 is the latest installed DEBUG: autoconf 2.65_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port autoconf. DEBUG: Requested variant i386 is not provided by port autoconf. DEBUG: Requested variant macosx is not provided by port autoconf. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: perl5 5.8.9_0 exists in the ports tree DEBUG: perl5 5.8.9_0 is the latest installed DEBUG: perl5 5.8.9_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port perl5. DEBUG: Requested variant i386 is not provided by port perl5. DEBUG: Requested variant macosx is not provided by port perl5. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: perl5.8 5.8.9_3 exists in the ports tree DEBUG: perl5.8 5.8.9_3 is the latest installed DEBUG: perl5.8 5.8.9_3 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port perl5.8. DEBUG: Requested variant i386 is not provided by port perl5.8. DEBUG: Requested variant macosx is not provided by port perl5.8. DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3 DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: m4 1.4.14_0 exists in the ports tree DEBUG: m4 1.4.14_0 is the latest installed DEBUG: m4 1.4.14_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port m4. DEBUG: Requested variant i386 is not provided by port m4. DEBUG: Requested variant macosx is not provided by port m4. DEBUG: No need to upgrade! m4 1.4.14_0 >= m4 1.4.14_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man DEBUG: epoch: in tree: 0 installed: 0 DEBUG: help2man 1.37.1_1 exists in the ports tree DEBUG: help2man 1.37.1_1 is the latest installed DEBUG: help2man 1.37.1_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port help2man. DEBUG: Requested variant i386 is not provided by port help2man. DEBUG: Requested variant macosx is not provided by port help2man. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext DEBUG: epoch: in tree: 0 installed: 0 DEBUG: p5-locale-gettext 1.05_2 exists in the ports tree DEBUG: p5-locale-gettext 1.05_2 is the latest installed DEBUG: p5-locale-gettext 1.05_2 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port p5-locale-gettext. DEBUG: Requested variant i386 is not provided by port p5-locale-gettext. DEBUG: Requested variant macosx is not provided by port p5-locale-gettext. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gettext 0.17_4 exists in the ports tree DEBUG: gettext 0.17_4 is the latest installed DEBUG: gettext 0.17_4 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port gettext. DEBUG: Requested variant i386 is not provided by port gettext. DEBUG: Requested variant macosx is not provided by port gettext. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses DEBUG: epoch: in tree: 0 installed: 0 DEBUG: ncurses 5.7_0 exists in the ports tree DEBUG: ncurses 5.7_0 +darwin_10 is the latest installed DEBUG: ncurses 5.7_0 +darwin_10 is active DEBUG: Merging existing variants darwin_10 into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port ncurses. DEBUG: Requested variant i386 is not provided by port ncurses. DEBUG: Requested variant macosx is not provided by port ncurses. DEBUG: Executing variant darwin_10 provides darwin_10 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw DEBUG: epoch: in tree: 0 installed: 0 DEBUG: ncursesw 5.7_0 exists in the ports tree DEBUG: ncursesw 5.7_0 +darwin_10 is the latest installed DEBUG: ncursesw 5.7_0 +darwin_10 is active DEBUG: Merging existing variants darwin_10 into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port ncursesw. DEBUG: Requested variant i386 is not provided by port ncursesw. DEBUG: Requested variant macosx is not provided by port ncursesw. DEBUG: Executing variant darwin_10 provides darwin_10 DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0 DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0 DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4 DEBUG: No need to upgrade! p5-locale-gettext 1.05_2 >= p5-locale-gettext 1.05_2 DEBUG: No need to upgrade! help2man 1.37.1_1 >= help2man 1.37.1_1 DEBUG: No need to upgrade! autoconf 2.65_1 >= autoconf 2.65_1 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake DEBUG: epoch: in tree: 0 installed: 0 DEBUG: automake 1.11.1_0 exists in the ports tree DEBUG: automake 1.11.1_0 is the latest installed DEBUG: automake 1.11.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port automake. DEBUG: Requested variant i386 is not provided by port automake. DEBUG: Requested variant macosx is not provided by port automake. DEBUG: No need to upgrade! automake 1.11.1_0 >= automake 1.11.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libtool 2.2.6b_1 exists in the ports tree DEBUG: libtool 2.2.6b_1 +darwin is the latest installed DEBUG: libtool 2.2.6b_1 +darwin is active DEBUG: Merging existing variants darwin into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: adding the default universal variant DEBUG: Requested variant i386 is not provided by port libtool. DEBUG: Requested variant macosx is not provided by port libtool. DEBUG: Executing variant darwin provides darwin DEBUG: No need to upgrade! libtool 2.2.6b_1 >= libtool 2.2.6b_1 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/python_select DEBUG: python_select is *not* installed by MacPorts DEBUG: Searching for dependency: python_select DEBUG: Didn't find receipt, going to depspec regex for: python_select DEBUG: Found Dependency: path: /usr/bin filename: python regex: ^python$ DEBUG: python_select not installed, soft dependency satisfied DEBUG: No need to upgrade! glib2 2.22.5_0 >= glib2 2.22.5_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg DEBUG: epoch: in tree: 0 installed: 0 DEBUG: jpeg 8a_0 exists in the ports tree DEBUG: jpeg 8a_0 is the latest installed DEBUG: jpeg 8a_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port jpeg. DEBUG: Requested variant i386 is not provided by port jpeg. DEBUG: Requested variant macosx is not provided by port jpeg. DEBUG: No need to upgrade! jpeg 8a_0 >= jpeg 8a_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff DEBUG: epoch: in tree: 0 installed: 0 DEBUG: tiff 3.9.2_3 exists in the ports tree DEBUG: tiff 3.9.2_3 +macosx is the latest installed DEBUG: tiff 3.9.2_3 +macosx is active DEBUG: Merging existing variants macosx into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port tiff. DEBUG: Requested variant i386 is not provided by port tiff. DEBUG: Executing variant macosx provides macosx DEBUG: No need to upgrade! tiff 3.9.2_3 >= tiff 3.9.2_3 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jasper DEBUG: epoch: in tree: 0 installed: 0 DEBUG: jasper 1.900.1_7 exists in the ports tree DEBUG: jasper 1.900.1_7 is the latest installed DEBUG: jasper 1.900.1_7 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jasper DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port jasper. DEBUG: Requested variant i386 is not provided by port jasper. DEBUG: Requested variant macosx is not provided by port jasper. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/unzip DEBUG: unzip is *not* installed by MacPorts DEBUG: Searching for dependency: unzip DEBUG: Didn't find receipt, going to depspec regex for: unzip DEBUG: Found Dependency: path: /usr/bin filename: unzip regex: ^unzip$ DEBUG: unzip not installed, soft dependency satisfied DEBUG: No need to upgrade! jasper 1.900.1_7 >= jasper 1.900.1_7 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/atk DEBUG: epoch: in tree: 0 installed: 0 DEBUG: atk 1.28.0_0 exists in the ports tree DEBUG: atk 1.28.0_0 is the latest installed DEBUG: atk 1.28.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/atk DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port atk. DEBUG: Requested variant i386 is not provided by port atk. DEBUG: Requested variant macosx is not provided by port atk. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gtk-doc DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gtk-doc 1.13_0 exists in the ports tree DEBUG: gtk-doc 1.13_0 is the latest installed DEBUG: gtk-doc 1.13_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gtk-doc DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port gtk-doc. DEBUG: Requested variant i386 is not provided by port gtk-doc. DEBUG: Requested variant macosx is not provided by port gtk-doc. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/rarian DEBUG: epoch: in tree: 0 installed: 0 DEBUG: rarian 0.8.1_0 exists in the ports tree DEBUG: rarian 0.8.1_0 is the latest installed DEBUG: rarian 0.8.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/rarian DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port rarian. DEBUG: Requested variant i386 is not provided by port rarian. DEBUG: Requested variant macosx is not provided by port rarian. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/intltool DEBUG: epoch: in tree: 0 installed: 0 DEBUG: intltool 0.40.6_0 exists in the ports tree DEBUG: intltool 0.40.6_0 is the latest installed DEBUG: intltool 0.40.6_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/intltool DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port intltool. DEBUG: Requested variant i386 is not provided by port intltool. DEBUG: Requested variant macosx is not provided by port intltool. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gnome-common DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gnome-common 2.26.0_0 exists in the ports tree DEBUG: gnome-common 2.26.0_0 is the latest installed DEBUG: gnome-common 2.26.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gnome-common DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port gnome-common. DEBUG: Requested variant i386 is not provided by port gnome-common. DEBUG: Requested variant macosx is not provided by port gnome-common. DEBUG: No need to upgrade! gnome-common 2.26.0_0 >= gnome-common 2.26.0_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-xml-parser DEBUG: epoch: in tree: 0 installed: 0 DEBUG: p5-xml-parser 2.36_0 exists in the ports tree DEBUG: p5-xml-parser 2.36_0 is the latest installed DEBUG: p5-xml-parser 2.36_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-xml-parser DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port p5-xml-parser. DEBUG: Requested variant i386 is not provided by port p5-xml-parser. DEBUG: Requested variant macosx is not provided by port p5-xml-parser. DEBUG: No need to upgrade! p5-xml-parser 2.36_0 >= p5-xml-parser 2.36_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-getopt-long DEBUG: epoch: in tree: 0 installed: 0 DEBUG: p5-getopt-long 2.38_0 exists in the ports tree DEBUG: p5-getopt-long 2.38_0 is the latest installed DEBUG: p5-getopt-long 2.38_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-getopt-long DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port p5-getopt-long. DEBUG: Requested variant i386 is not provided by port p5-getopt-long. DEBUG: Requested variant macosx is not provided by port p5-getopt-long. DEBUG: No need to upgrade! p5-getopt-long 2.38_0 >= p5-getopt-long 2.38_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-pathtools DEBUG: epoch: in tree: 0 installed: 0 DEBUG: p5-pathtools 3.31_0 exists in the ports tree DEBUG: p5-pathtools 3.31_0 is the latest installed DEBUG: p5-pathtools 3.31_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-pathtools DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port p5-pathtools. DEBUG: Requested variant i386 is not provided by port p5-pathtools. DEBUG: Requested variant macosx is not provided by port p5-pathtools. DEBUG: No need to upgrade! p5-pathtools 3.31_0 >= p5-pathtools 3.31_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-scalar-list-utils DEBUG: epoch: in tree: 0 installed: 0 DEBUG: p5-scalar-list-utils 1.23_0 exists in the ports tree DEBUG: p5-scalar-list-utils 1.23_0 is the latest installed DEBUG: p5-scalar-list-utils 1.23_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-scalar-list-utils DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port p5-scalar-list-utils. DEBUG: Requested variant i386 is not provided by port p5-scalar-list-utils. DEBUG: Requested variant macosx is not provided by port p5-scalar-list-utils. DEBUG: No need to upgrade! p5-scalar-list-utils 1.23_0 >= p5-scalar-list-utils 1.23_0 DEBUG: No need to upgrade! intltool 0.40.6_0 >= intltool 0.40.6_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/getopt DEBUG: epoch: in tree: 0 installed: 0 DEBUG: getopt 1.1.4_1 exists in the ports tree DEBUG: getopt 1.1.4_1 is the latest installed DEBUG: getopt 1.1.4_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/getopt DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port getopt. DEBUG: Requested variant i386 is not provided by port getopt. DEBUG: Requested variant macosx is not provided by port getopt. DEBUG: No need to upgrade! getopt 1.1.4_1 >= getopt 1.1.4_1 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxslt DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libxslt 1.1.26_0 exists in the ports tree DEBUG: libxslt 1.1.26_0 is the latest installed DEBUG: libxslt 1.1.26_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxslt DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port libxslt. DEBUG: Requested variant i386 is not provided by port libxslt. DEBUG: Requested variant macosx is not provided by port libxslt. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libxml2 2.7.7_0 exists in the ports tree DEBUG: libxml2 2.7.7_0 is the latest installed DEBUG: libxml2 2.7.7_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port libxml2. DEBUG: Requested variant i386 is not provided by port libxml2. DEBUG: Requested variant macosx is not provided by port libxml2. DEBUG: No need to upgrade! libxml2 2.7.7_0 >= libxml2 2.7.7_0 DEBUG: No need to upgrade! libxslt 1.1.26_0 >= libxslt 1.1.26_0 DEBUG: No need to upgrade! rarian 0.8.1_0 >= rarian 0.8.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gnome-doc-utils DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gnome-doc-utils 0.18.1_1 exists in the ports tree DEBUG: gnome-doc-utils 0.18.1_1 is the latest installed DEBUG: gnome-doc-utils 0.18.1_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gnome-doc-utils DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port gnome-doc-utils. DEBUG: Requested variant i386 is not provided by port gnome-doc-utils. DEBUG: Requested variant macosx is not provided by port gnome-doc-utils. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python26 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: python26 2.6.5_0 exists in the ports tree DEBUG: python26 2.6.5_0 +darwin is the latest installed DEBUG: python26 2.6.5_0 +darwin is active DEBUG: Merging existing variants darwin into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python26 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant i386 is not provided by port python26. DEBUG: Requested variant macosx is not provided by port python26. DEBUG: Executing variant darwin provides darwin DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl DEBUG: epoch: in tree: 1 installed: 1 DEBUG: openssl 0.9.8n_0 exists in the ports tree DEBUG: openssl 0.9.8n_0 +darwin is the latest installed DEBUG: openssl 0.9.8n_0 +darwin is active DEBUG: Merging existing variants darwin into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant i386 is not provided by port openssl. DEBUG: Requested variant macosx is not provided by port openssl. DEBUG: Executing variant darwin provides darwin DEBUG: No need to upgrade! openssl 0.9.8n_0 >= openssl 0.9.8n_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/tk DEBUG: epoch: in tree: 0 installed: 0 DEBUG: tk 8.5.8_0 exists in the ports tree DEBUG: tk 8.5.8_0 +darwin is the latest installed DEBUG: tk 8.5.8_0 +darwin is active DEBUG: Merging existing variants darwin into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/tk DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: adding the default universal variant DEBUG: Requested variant i386 is not provided by port tk. DEBUG: Requested variant macosx is not provided by port tk. DEBUG: Executing variant darwin provides darwin DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/tcl DEBUG: epoch: in tree: 0 installed: 0 DEBUG: tcl 8.5.8_0 exists in the ports tree DEBUG: tcl 8.5.8_0 +darwin is the latest installed DEBUG: tcl 8.5.8_0 +darwin is active DEBUG: Merging existing variants darwin into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/tcl DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: adding the default universal variant DEBUG: Requested variant i386 is not provided by port tcl. DEBUG: Requested variant macosx is not provided by port tcl. DEBUG: Executing variant darwin provides darwin DEBUG: No need to upgrade! tcl 8.5.8_0 >= tcl 8.5.8_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: Xft2 2.1.14_0 exists in the ports tree DEBUG: Xft2 2.1.14_0 is the latest installed DEBUG: Xft2 2.1.14_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port Xft2. DEBUG: Requested variant i386 is not provided by port Xft2. DEBUG: Requested variant macosx is not provided by port Xft2. DEBUG: No need to upgrade! Xft2 2.1.14_0 >= Xft2 2.1.14_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXScrnSaver DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXScrnSaver 1.2.0_0 exists in the ports tree DEBUG: xorg-libXScrnSaver 1.2.0_0 is the latest installed DEBUG: xorg-libXScrnSaver 1.2.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXScrnSaver DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXScrnSaver. DEBUG: Requested variant i386 is not provided by port xorg-libXScrnSaver. DEBUG: Requested variant macosx is not provided by port xorg-libXScrnSaver. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXext DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXext 1.1.1_0 exists in the ports tree DEBUG: xorg-libXext 1.1.1_0 is the latest installed DEBUG: xorg-libXext 1.1.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXext DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXext. DEBUG: Requested variant i386 is not provided by port xorg-libXext. DEBUG: Requested variant macosx is not provided by port xorg-libXext. DEBUG: No need to upgrade! xorg-libXext 1.1.1_0 >= xorg-libXext 1.1.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-scrnsaverproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-scrnsaverproto 1.2.0_0 exists in the ports tree DEBUG: xorg-scrnsaverproto 1.2.0_0 is the latest installed DEBUG: xorg-scrnsaverproto 1.2.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-scrnsaverproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-scrnsaverproto. DEBUG: Requested variant i386 is not provided by port xorg-scrnsaverproto. DEBUG: Requested variant macosx is not provided by port xorg-scrnsaverproto. DEBUG: No need to upgrade! xorg-scrnsaverproto 1.2.0_0 >= xorg-scrnsaverproto 1.2.0_0 DEBUG: No need to upgrade! xorg-libXScrnSaver 1.2.0_0 >= xorg-libXScrnSaver 1.2.0_0 DEBUG: No need to upgrade! tk 8.5.8_0 >= tk 8.5.8_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: sqlite3 3.6.23_0 exists in the ports tree DEBUG: sqlite3 3.6.23_0 is the latest installed DEBUG: sqlite3 3.6.23_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: adding the default universal variant DEBUG: Requested variant darwin is not provided by port sqlite3. DEBUG: Requested variant i386 is not provided by port sqlite3. DEBUG: Requested variant macosx is not provided by port sqlite3. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline DEBUG: epoch: in tree: 0 installed: 0 DEBUG: readline 6.1.000_1 exists in the ports tree DEBUG: readline 6.1.000_1 +darwin is the latest installed DEBUG: readline 6.1.000_1 +darwin is active DEBUG: Merging existing variants darwin into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant i386 is not provided by port readline. DEBUG: Requested variant macosx is not provided by port readline. DEBUG: Executing variant darwin provides darwin DEBUG: No need to upgrade! readline 6.1.000_1 >= readline 6.1.000_1 DEBUG: No need to upgrade! sqlite3 3.6.23_0 >= sqlite3 3.6.23_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: db46 4.6.21_6 exists in the ports tree DEBUG: db46 4.6.21_6 is the latest installed DEBUG: db46 4.6.21_6 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port db46. DEBUG: Requested variant i386 is not provided by port db46. DEBUG: Requested variant macosx is not provided by port db46. DEBUG: No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gdbm 1.8.3_2 exists in the ports tree DEBUG: gdbm 1.8.3_2 is the latest installed DEBUG: gdbm 1.8.3_2 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port gdbm. DEBUG: Requested variant i386 is not provided by port gdbm. DEBUG: Requested variant macosx is not provided by port gdbm. DEBUG: No need to upgrade! gdbm 1.8.3_2 >= gdbm 1.8.3_2 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: bzip2 1.0.5_3 exists in the ports tree DEBUG: bzip2 1.0.5_3 +darwin is the latest installed DEBUG: bzip2 1.0.5_3 +darwin is active DEBUG: Merging existing variants darwin into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant i386 is not provided by port bzip2. DEBUG: Requested variant macosx is not provided by port bzip2. DEBUG: Executing variant darwin provides darwin DEBUG: No need to upgrade! bzip2 1.0.5_3 >= bzip2 1.0.5_3 DEBUG: No need to upgrade! python26 2.6.5_0 >= python26 2.6.5_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml DEBUG: epoch: in tree: 0 installed: 0 DEBUG: docbook-xml 5.0_0 exists in the ports tree DEBUG: docbook-xml 5.0_0 is the latest installed DEBUG: docbook-xml 5.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port docbook-xml. DEBUG: Requested variant i386 is not provided by port docbook-xml. DEBUG: Requested variant macosx is not provided by port docbook-xml. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.1.2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: docbook-xml-4.1.2 4.1.2_1 exists in the ports tree DEBUG: docbook-xml-4.1.2 4.1.2_1 is the latest installed DEBUG: docbook-xml-4.1.2 4.1.2_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.1.2 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: not using configure, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port docbook-xml-4.1.2. DEBUG: Requested variant i386 is not provided by port docbook-xml-4.1.2. DEBUG: Requested variant macosx is not provided by port docbook-xml-4.1.2. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/xmlcatmgr DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xmlcatmgr 2.2_1 exists in the ports tree DEBUG: xmlcatmgr 2.2_1 is the latest installed DEBUG: xmlcatmgr 2.2_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/xmlcatmgr DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xmlcatmgr. DEBUG: Requested variant i386 is not provided by port xmlcatmgr. DEBUG: Requested variant macosx is not provided by port xmlcatmgr. DEBUG: No need to upgrade! xmlcatmgr 2.2_1 >= xmlcatmgr 2.2_1 DEBUG: No need to upgrade! docbook-xml-4.1.2 4.1.2_1 >= docbook-xml-4.1.2 4.1.2_1 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: docbook-xml-4.2 4.2_0 exists in the ports tree DEBUG: docbook-xml-4.2 4.2_0 is the latest installed DEBUG: docbook-xml-4.2 4.2_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.2 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: not using configure, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port docbook-xml-4.2. DEBUG: Requested variant i386 is not provided by port docbook-xml-4.2. DEBUG: Requested variant macosx is not provided by port docbook-xml-4.2. DEBUG: No need to upgrade! docbook-xml-4.2 4.2_0 >= docbook-xml-4.2 4.2_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.3 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: docbook-xml-4.3 4.3_0 exists in the ports tree DEBUG: docbook-xml-4.3 4.3_0 is the latest installed DEBUG: docbook-xml-4.3 4.3_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.3 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: not using configure, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port docbook-xml-4.3. DEBUG: Requested variant i386 is not provided by port docbook-xml-4.3. DEBUG: Requested variant macosx is not provided by port docbook-xml-4.3. DEBUG: No need to upgrade! docbook-xml-4.3 4.3_0 >= docbook-xml-4.3 4.3_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.4 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: docbook-xml-4.4 4.4_0 exists in the ports tree DEBUG: docbook-xml-4.4 4.4_0 is the latest installed DEBUG: docbook-xml-4.4 4.4_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.4 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: not using configure, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port docbook-xml-4.4. DEBUG: Requested variant i386 is not provided by port docbook-xml-4.4. DEBUG: Requested variant macosx is not provided by port docbook-xml-4.4. DEBUG: No need to upgrade! docbook-xml-4.4 4.4_0 >= docbook-xml-4.4 4.4_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.5 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: docbook-xml-4.5 4.5_0 exists in the ports tree DEBUG: docbook-xml-4.5 4.5_0 is the latest installed DEBUG: docbook-xml-4.5 4.5_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.5 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: not using configure, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port docbook-xml-4.5. DEBUG: Requested variant i386 is not provided by port docbook-xml-4.5. DEBUG: Requested variant macosx is not provided by port docbook-xml-4.5. DEBUG: No need to upgrade! docbook-xml-4.5 4.5_0 >= docbook-xml-4.5 4.5_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-5.0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: docbook-xml-5.0 5.0_0 exists in the ports tree DEBUG: docbook-xml-5.0 5.0_0 is the latest installed DEBUG: docbook-xml-5.0 5.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-5.0 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port docbook-xml-5.0. DEBUG: Requested variant i386 is not provided by port docbook-xml-5.0. DEBUG: Requested variant macosx is not provided by port docbook-xml-5.0. DEBUG: No need to upgrade! docbook-xml-5.0 5.0_0 >= docbook-xml-5.0 5.0_0 DEBUG: No need to upgrade! docbook-xml 5.0_0 >= docbook-xml 5.0_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xsl DEBUG: epoch: in tree: 0 installed: 0 DEBUG: docbook-xsl 1.75.2_0 exists in the ports tree DEBUG: docbook-xsl 1.75.2_0 is the latest installed DEBUG: docbook-xsl 1.75.2_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xsl DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port docbook-xsl. DEBUG: Requested variant i386 is not provided by port docbook-xsl. DEBUG: Requested variant macosx is not provided by port docbook-xsl. DEBUG: No need to upgrade! docbook-xsl 1.75.2_0 >= docbook-xsl 1.75.2_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/iso-codes DEBUG: epoch: in tree: 0 installed: 0 DEBUG: iso-codes 3.14_0 exists in the ports tree DEBUG: iso-codes 3.14_0 is the latest installed DEBUG: iso-codes 3.14_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/iso-codes DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port iso-codes. DEBUG: Requested variant i386 is not provided by port iso-codes. DEBUG: Requested variant macosx is not provided by port iso-codes. DEBUG: No need to upgrade! iso-codes 3.14_0 >= iso-codes 3.14_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-libxml2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: py26-libxml2 2.6.21_0 exists in the ports tree DEBUG: py26-libxml2 2.6.21_0 is the latest installed DEBUG: py26-libxml2 2.6.21_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-libxml2 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl DEBUG: not using configure, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port py26-libxml2. DEBUG: Requested variant i386 is not provided by port py26-libxml2. DEBUG: Requested variant macosx is not provided by port py26-libxml2. DEBUG: No need to upgrade! py26-libxml2 2.6.21_0 >= py26-libxml2 2.6.21_0 DEBUG: No need to upgrade! gnome-doc-utils 0.18.1_1 >= gnome-doc-utils 0.18.1_1 DEBUG: No need to upgrade! gtk-doc 1.13_0 >= gtk-doc 1.13_0 DEBUG: No need to upgrade! atk 1.28.0_0 >= atk 1.28.0_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/pango DEBUG: epoch: in tree: 1 installed: 1 DEBUG: pango 1.24.5_0 exists in the ports tree DEBUG: pango 1.24.5_0 +macosx is the latest installed DEBUG: pango 1.24.5_0 +macosx is active DEBUG: Merging existing variants macosx into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/pango DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port pango. DEBUG: Requested variant i386 is not provided by port pango. DEBUG: Executing variant macosx provides macosx DEBUG: No need to upgrade! pango 1.24.5_0 >= pango 1.24.5_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXi DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXi 1.3_0 exists in the ports tree DEBUG: xorg-libXi 1.3_0 is the latest installed DEBUG: xorg-libXi 1.3_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXi DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXi. DEBUG: Requested variant i386 is not provided by port xorg-libXi. DEBUG: Requested variant macosx is not provided by port xorg-libXi. DEBUG: No need to upgrade! xorg-libXi 1.3_0 >= xorg-libXi 1.3_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXrandr DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXrandr 1.3.0_1 exists in the ports tree DEBUG: xorg-libXrandr 1.3.0_1 is the latest installed DEBUG: xorg-libXrandr 1.3.0_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXrandr DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXrandr. DEBUG: Requested variant i386 is not provided by port xorg-libXrandr. DEBUG: Requested variant macosx is not provided by port xorg-libXrandr. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-randrproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-randrproto 1.3.1_0 exists in the ports tree DEBUG: xorg-randrproto 1.3.1_0 is the latest installed DEBUG: xorg-randrproto 1.3.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-randrproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-randrproto. DEBUG: Requested variant i386 is not provided by port xorg-randrproto. DEBUG: Requested variant macosx is not provided by port xorg-randrproto. DEBUG: No need to upgrade! xorg-randrproto 1.3.1_0 >= xorg-randrproto 1.3.1_0 DEBUG: No need to upgrade! xorg-libXrandr 1.3.0_1 >= xorg-libXrandr 1.3.0_1 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXcursor DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXcursor 1.1.10_0 exists in the ports tree DEBUG: xorg-libXcursor 1.1.10_0 is the latest installed DEBUG: xorg-libXcursor 1.1.10_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXcursor DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXcursor. DEBUG: Requested variant i386 is not provided by port xorg-libXcursor. DEBUG: Requested variant macosx is not provided by port xorg-libXcursor. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-fixesproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-fixesproto 4.1.1_0 exists in the ports tree DEBUG: xorg-fixesproto 4.1.1_0 is the latest installed DEBUG: xorg-fixesproto 4.1.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-fixesproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-fixesproto. DEBUG: Requested variant i386 is not provided by port xorg-fixesproto. DEBUG: Requested variant macosx is not provided by port xorg-fixesproto. DEBUG: No need to upgrade! xorg-fixesproto 4.1.1_0 >= xorg-fixesproto 4.1.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXfixes DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXfixes 4.0.4_0 exists in the ports tree DEBUG: xorg-libXfixes 4.0.4_0 is the latest installed DEBUG: xorg-libXfixes 4.0.4_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXfixes DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXfixes. DEBUG: Requested variant i386 is not provided by port xorg-libXfixes. DEBUG: Requested variant macosx is not provided by port xorg-libXfixes. DEBUG: No need to upgrade! xorg-libXfixes 4.0.4_0 >= xorg-libXfixes 4.0.4_0 DEBUG: No need to upgrade! xorg-libXcursor 1.1.10_0 >= xorg-libXcursor 1.1.10_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXinerama DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXinerama 1.1_0 exists in the ports tree DEBUG: xorg-libXinerama 1.1_0 is the latest installed DEBUG: xorg-libXinerama 1.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXinerama DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXinerama. DEBUG: Requested variant i386 is not provided by port xorg-libXinerama. DEBUG: Requested variant macosx is not provided by port xorg-libXinerama. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xineramaproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-xineramaproto 1.2_0 exists in the ports tree DEBUG: xorg-xineramaproto 1.2_0 is the latest installed DEBUG: xorg-xineramaproto 1.2_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xineramaproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-xineramaproto. DEBUG: Requested variant i386 is not provided by port xorg-xineramaproto. DEBUG: Requested variant macosx is not provided by port xorg-xineramaproto. DEBUG: No need to upgrade! xorg-xineramaproto 1.2_0 >= xorg-xineramaproto 1.2_0 DEBUG: No need to upgrade! xorg-libXinerama 1.1_0 >= xorg-libXinerama 1.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdamage DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXdamage 1.1.2_0 exists in the ports tree DEBUG: xorg-libXdamage 1.1.2_0 is the latest installed DEBUG: xorg-libXdamage 1.1.2_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdamage DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXdamage. DEBUG: Requested variant i386 is not provided by port xorg-libXdamage. DEBUG: Requested variant macosx is not provided by port xorg-libXdamage. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-damageproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-damageproto 1.2.0_0 exists in the ports tree DEBUG: xorg-damageproto 1.2.0_0 is the latest installed DEBUG: xorg-damageproto 1.2.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-damageproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-damageproto. DEBUG: Requested variant i386 is not provided by port xorg-damageproto. DEBUG: Requested variant macosx is not provided by port xorg-damageproto. DEBUG: No need to upgrade! xorg-damageproto 1.2.0_0 >= xorg-damageproto 1.2.0_0 DEBUG: No need to upgrade! xorg-libXdamage 1.1.2_0 >= xorg-libXdamage 1.1.2_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXcomposite DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXcomposite 0.4.1_0 exists in the ports tree DEBUG: xorg-libXcomposite 0.4.1_0 is the latest installed DEBUG: xorg-libXcomposite 0.4.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXcomposite DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXcomposite. DEBUG: Requested variant i386 is not provided by port xorg-libXcomposite. DEBUG: Requested variant macosx is not provided by port xorg-libXcomposite. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-compositeproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-compositeproto 0.4.1_0 exists in the ports tree DEBUG: xorg-compositeproto 0.4.1_0 is the latest installed DEBUG: xorg-compositeproto 0.4.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-compositeproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-compositeproto. DEBUG: Requested variant i386 is not provided by port xorg-compositeproto. DEBUG: Requested variant macosx is not provided by port xorg-compositeproto. DEBUG: No need to upgrade! xorg-compositeproto 0.4.1_0 >= xorg-compositeproto 0.4.1_0 DEBUG: No need to upgrade! xorg-libXcomposite 0.4.1_0 >= xorg-libXcomposite 0.4.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/shared-mime-info DEBUG: epoch: in tree: 0 installed: 0 DEBUG: shared-mime-info 0.71_0 exists in the ports tree DEBUG: shared-mime-info 0.71_0 is the latest installed DEBUG: shared-mime-info 0.71_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/shared-mime-info DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port shared-mime-info. DEBUG: Requested variant i386 is not provided by port shared-mime-info. DEBUG: Requested variant macosx is not provided by port shared-mime-info. DEBUG: No need to upgrade! shared-mime-info 0.71_0 >= shared-mime-info 0.71_0 DEBUG: No need to upgrade! gtk2 2.18.8_0 >= gtk2 2.18.8_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/popt DEBUG: epoch: in tree: 0 installed: 0 DEBUG: popt 1.15_0 exists in the ports tree DEBUG: popt 1.15_0 is the latest installed DEBUG: popt 1.15_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/popt DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port popt. DEBUG: Requested variant i386 is not provided by port popt. DEBUG: Requested variant macosx is not provided by port popt. DEBUG: No need to upgrade! popt 1.15_0 >= popt 1.15_0 ---> Computing dependencies for stardict DEBUG: Searching for dependency: gtk2 DEBUG: Found Dependency: receipt exists for gtk2 DEBUG: Searching for dependency: popt DEBUG: Found Dependency: receipt exists for popt DEBUG: Searching for dependency: p5-xml-parser DEBUG: Found Dependency: receipt exists for p5-xml-parser DEBUG: Executing org.macports.main (stardict) DEBUG: Skipping completed org.macports.fetch (stardict) DEBUG: Skipping completed org.macports.checksum (stardict) DEBUG: setting option extract.cmd to /usr/bin/bzip2 DEBUG: Skipping completed org.macports.extract (stardict) DEBUG: Skipping completed org.macports.patch (stardict) DEBUG: Skipping completed org.macports.configure (stardict) ---> Building stardict DEBUG: Executing org.macports.build (stardict) DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.6' DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_textproc_stardict/work/stardict-2.4.5" && /usr/bin/make -j4 all' /usr/bin/make all-recursive Making all in src Making all in pixmaps make[3]: Nothing to be done for `all'. Making all in sounds make[3]: Nothing to be done for `all'. Making all in tools make[4]: Nothing to be done for `all-am'. Making all in win32 Making all in nsis make[4]: Nothing to be done for `all'. make[4]: Nothing to be done for `all-am'. if /usr/bin/g++-4.2 -DHAVE_CONFIG_H -I. -I. -I.. -I/opt/local/include/gtk-2.0 -I/opt/local/lib/gtk-2.0/include -I/opt/local/include/atk-1.0 -I/opt/local/include/cairo -I/opt/local/include/pango-1.0 -I/opt/local/include -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng12 -DDATADIR=\""/opt/local/share"\" -DGNOME_ICONDIR=\""/opt/local/share/pixmaps"\" -DSTARDICT_LOCALEDIR=\""/opt/local/share/locale"\" -DSTARDICT_DATA_DIR=\""/opt/local/share/stardict"\" -I/opt/local/include -O2 -arch x86_64 -MT stardict.o -MD -MP -MF ".deps/stardict.Tpo" -c -o stardict.o stardict.cpp; \ then mv -f ".deps/stardict.Tpo" ".deps/stardict.Po"; else rm -f ".deps/stardict.Tpo"; exit 1; fi if /usr/bin/g++-4.2 -DHAVE_CONFIG_H -I. -I. -I.. -I/opt/local/include/gtk-2.0 -I/opt/local/lib/gtk-2.0/include -I/opt/local/include/atk-1.0 -I/opt/local/include/cairo -I/opt/local/include/pango-1.0 -I/opt/local/include -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng12 -DDATADIR=\""/opt/local/share"\" -DGNOME_ICONDIR=\""/opt/local/share/pixmaps"\" -DSTARDICT_LOCALEDIR=\""/opt/local/share/locale"\" -DSTARDICT_DATA_DIR=\""/opt/local/share/stardict"\" -I/opt/local/include -O2 -arch x86_64 -MT mainwin.o -MD -MP -MF ".deps/mainwin.Tpo" -c -o mainwin.o mainwin.cpp; \ then mv -f ".deps/mainwin.Tpo" ".deps/mainwin.Po"; else rm -f ".deps/mainwin.Tpo"; exit 1; fi if /usr/bin/g++-4.2 -DHAVE_CONFIG_H -I. -I. -I.. -I/opt/local/include/gtk-2.0 -I/opt/local/lib/gtk-2.0/include -I/opt/local/include/atk-1.0 -I/opt/local/include/cairo -I/opt/local/include/pango-1.0 -I/opt/local/include -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng12 -DDATADIR=\""/opt/local/share"\" -DGNOME_ICONDIR=\""/opt/local/share/pixmaps"\" -DSTARDICT_LOCALEDIR=\""/opt/local/share/locale"\" -DSTARDICT_DATA_DIR=\""/opt/local/share/stardict"\" -I/opt/local/include -O2 -arch x86_64 -MT docklet.o -MD -MP -MF ".deps/docklet.Tpo" -c -o docklet.o docklet.cpp; \ then mv -f ".deps/docklet.Tpo" ".deps/docklet.Po"; else rm -f ".deps/docklet.Tpo"; exit 1; fi if /usr/bin/g++-4.2 -DHAVE_CONFIG_H -I. -I. -I.. -I/opt/local/include/gtk-2.0 -I/opt/local/lib/gtk-2.0/include -I/opt/local/include/atk-1.0 -I/opt/local/include/cairo -I/opt/local/include/pango-1.0 -I/opt/local/include -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng12 -DDATADIR=\""/opt/local/share"\" -DGNOME_ICONDIR=\""/opt/local/share/pixmaps"\" -DSTARDICT_LOCALEDIR=\""/opt/local/share/locale"\" -DSTARDICT_DATA_DIR=\""/opt/local/share/stardict"\" -I/opt/local/include -O2 -arch x86_64 -MT conf.o -MD -MP -MF ".deps/conf.Tpo" -c -o conf.o conf.cpp; \ then mv -f ".deps/conf.Tpo" ".deps/conf.Po"; else rm -f ".deps/conf.Tpo"; exit 1; fi In file included from stardict.h:15, from docklet.cpp:7: skin.h:11: error: extra qualification '_Skin_cursor::' on member '_Skin_cursor' skin.h:12: error: extra qualification '_Skin_cursor::' on member '_Skin_cursor' In file included from stardict.h:15, from mainwin.cpp:19: skin.h:11: error: extra qualification '_Skin_cursor::' on member '_Skin_cursor' skin.h:12: error: extra qualification '_Skin_cursor::' on member '_Skin_cursor' In file included from stardict.h:15, from stardict.cpp:63: skin.h:11: error: extra qualification '_Skin_cursor::' on member '_Skin_cursor'In file included from stardict.h:15, from conf.cpp:15: skin.h:11: error: extra qualification '_Skin_cursor::' on member '_Skin_cursor' skin.h:12: error: extra qualification '_Skin_cursor::' on member '_Skin_cursor' skin.h:12: error: extra qualification '_Skin_cursor::' on member '_Skin_cursor' make[3]: *** [docklet.o] Error 1 make[3]: *** Waiting for unfinished jobs.... make[3]: *** [conf.o] Error 1 make[3]: *** [stardict.o] Error 1 mainwin.cpp: In static member function 'static void TopWin::on_main_menu_about_activate(GtkMenuItem*, TopWin*)': mainwin.cpp:449: warning: deprecated conversion from string constant to 'gchar*' mainwin.cpp:449: warning: deprecated conversion from string constant to 'gchar*' mainwin.cpp:449: warning: deprecated conversion from string constant to 'gchar*' make[3]: *** [mainwin.o] Error 1 make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_textproc_stardict/work/stardict-2.4.5" && /usr/bin/make -j4 all " returned error 2 DEBUG: Backtrace: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_textproc_stardict/work/stardict-2.4.5" && /usr/bin/make -j4 all " returned error 2 while executing "command_exec build" (procedure "portbuild::build_main" line 9) invoked from within "$procedure $targetname" Warning: the following items did not execute (for stardict): org.macports.activate org.macports.build org.macports.destroot org.macports.install Error: Status 1 encountered during processing. To report a bug, see