$ sudo port -d upgrade dbus-glib DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/dbus-glib DEBUG: epoch: in tree: 0 installed: 0 DEBUG: dbus-glib 0.86_0 exists in the ports tree DEBUG: dbus-glib 0.80_0 +universal is the latest installed DEBUG: dbus-glib 0.80_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/dbus-glib DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port dbus-glib. DEBUG: Requested variant i386 is not provided by port dbus-glib. DEBUG: Requested variant macosx is not provided by port dbus-glib. DEBUG: Executing variant universal provides universal DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig DEBUG: epoch: in tree: 0 installed: 0 DEBUG: pkgconfig 0.23_1 exists in the ports tree DEBUG: pkgconfig 0.23_1 +universal is the latest installed DEBUG: pkgconfig 0.23_1 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port pkgconfig. DEBUG: Requested variant i386 is not provided by port pkgconfig. DEBUG: Requested variant macosx is not provided by port pkgconfig. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! pkgconfig 0.23_1 >= pkgconfig 0.23_1 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat DEBUG: epoch: in tree: 0 installed: 0 DEBUG: expat 2.0.1_0 exists in the ports tree DEBUG: expat 2.0.1_0 +universal is the latest installed DEBUG: expat 2.0.1_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port expat. DEBUG: Requested variant i386 is not provided by port expat. DEBUG: Requested variant macosx is not provided by port expat. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libiconv 1.13.1_0 exists in the ports tree DEBUG: libiconv 1.13.1_0 +universal is the latest installed DEBUG: libiconv 1.13.1_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port libiconv. DEBUG: Requested variant i386 is not provided by port libiconv. DEBUG: Requested variant macosx is not provided by port libiconv. DEBUG: Executing variant universal provides universal DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gperf 3.0.4_0 exists in the ports tree DEBUG: gperf 3.0.4_0 +universal is the latest installed DEBUG: gperf 3.0.4_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port gperf. DEBUG: Requested variant i386 is not provided by port gperf. DEBUG: Requested variant macosx is not provided by port gperf. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0 DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/glib2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: glib2 2.22.5_0 exists in the ports tree DEBUG: glib2 2.22.5_0 +darwin+universal is the latest installed DEBUG: glib2 2.22.5_0 +darwin+universal is active DEBUG: Merging existing variants darwin universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/glib2 DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: adding the default universal variant DEBUG: Requested variant i386 is not provided by port glib2. DEBUG: Requested variant macosx is not provided by port glib2. DEBUG: Executing variant darwin provides darwin DEBUG: Executing variant universal provides universal DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf DEBUG: epoch: in tree: 0 installed: 0 DEBUG: autoconf 2.65_1 exists in the ports tree DEBUG: autoconf 2.65_1 is the latest installed DEBUG: autoconf 2.65_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port autoconf. DEBUG: Requested variant i386 is not provided by port autoconf. DEBUG: Requested variant macosx is not provided by port autoconf. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: perl5 5.8.9_0 exists in the ports tree DEBUG: perl5 5.8.9_0 is the latest installed DEBUG: perl5 5.8.9_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: not using configure, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port perl5. DEBUG: Requested variant i386 is not provided by port perl5. DEBUG: Requested variant macosx is not provided by port perl5. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: perl5.8 5.8.9_3 exists in the ports tree DEBUG: perl5.8 5.8.9_3 +universal is the latest installed DEBUG: perl5.8 5.8.9_3 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8 DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port perl5.8. DEBUG: Requested variant i386 is not provided by port perl5.8. DEBUG: Requested variant macosx is not provided by port perl5.8. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3 DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: m4 1.4.14_0 exists in the ports tree DEBUG: m4 1.4.14_0 +universal is the latest installed DEBUG: m4 1.4.14_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4 DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port m4. DEBUG: Requested variant i386 is not provided by port m4. DEBUG: Requested variant macosx is not provided by port m4. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! m4 1.4.14_0 >= m4 1.4.14_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man DEBUG: epoch: in tree: 0 installed: 0 DEBUG: help2man 1.37.1_1 exists in the ports tree DEBUG: help2man 1.37.1_1 +universal is the latest installed DEBUG: help2man 1.37.1_1 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port help2man. DEBUG: Requested variant i386 is not provided by port help2man. DEBUG: Requested variant macosx is not provided by port help2man. DEBUG: Executing variant universal provides universal DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext DEBUG: epoch: in tree: 0 installed: 0 DEBUG: p5-locale-gettext 1.05_2 exists in the ports tree DEBUG: p5-locale-gettext 1.05_2 is the latest installed DEBUG: p5-locale-gettext 1.05_2 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port p5-locale-gettext. DEBUG: Requested variant i386 is not provided by port p5-locale-gettext. DEBUG: Requested variant macosx is not provided by port p5-locale-gettext. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gettext 0.17_4 exists in the ports tree DEBUG: gettext 0.17_4 +universal is the latest installed DEBUG: gettext 0.17_4 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port gettext. DEBUG: Requested variant i386 is not provided by port gettext. DEBUG: Requested variant macosx is not provided by port gettext. DEBUG: Executing variant universal provides universal DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses DEBUG: epoch: in tree: 0 installed: 0 DEBUG: ncurses 5.7_0 exists in the ports tree DEBUG: ncurses 5.7_0 +universal is the latest installed DEBUG: ncurses 5.7_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port ncurses. DEBUG: Requested variant i386 is not provided by port ncurses. DEBUG: Requested variant macosx is not provided by port ncurses. DEBUG: Executing variant universal provides universal DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw DEBUG: epoch: in tree: 0 installed: 0 DEBUG: ncursesw 5.7_0 exists in the ports tree DEBUG: ncursesw 5.7_0 +universal is the latest installed DEBUG: ncursesw 5.7_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port ncursesw. DEBUG: Requested variant i386 is not provided by port ncursesw. DEBUG: Requested variant macosx is not provided by port ncursesw. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0 DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0 DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4 DEBUG: No need to upgrade! p5-locale-gettext 1.05_2 >= p5-locale-gettext 1.05_2 DEBUG: No need to upgrade! help2man 1.37.1_1 >= help2man 1.37.1_1 DEBUG: No need to upgrade! autoconf 2.65_1 >= autoconf 2.65_1 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake DEBUG: epoch: in tree: 0 installed: 0 DEBUG: automake 1.11.1_0 exists in the ports tree DEBUG: automake 1.11.1_0 +universal is the latest installed DEBUG: automake 1.11.1_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port automake. DEBUG: Requested variant i386 is not provided by port automake. DEBUG: Requested variant macosx is not provided by port automake. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! automake 1.11.1_0 >= automake 1.11.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libtool 2.2.6b_1 exists in the ports tree DEBUG: libtool 2.2.6b_1 +darwin+universal is the latest installed DEBUG: libtool 2.2.6b_1 +darwin+universal is active DEBUG: Merging existing variants darwin universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: adding the default universal variant DEBUG: Requested variant i386 is not provided by port libtool. DEBUG: Requested variant macosx is not provided by port libtool. DEBUG: Executing variant darwin provides darwin DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! libtool 2.2.6b_1 >= libtool 2.2.6b_1 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/python_select DEBUG: epoch: in tree: 0 installed: 0 DEBUG: python_select 0.3_0 exists in the ports tree DEBUG: python_select 0.3_0 +darwin_9 is the latest installed DEBUG: python_select 0.3_0 +darwin_9+universal is active DEBUG: Merging existing variants darwin_9 universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/python_select DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: adding the default universal variant DEBUG: Requested variant darwin is not provided by port python_select. DEBUG: Requested variant i386 is not provided by port python_select. DEBUG: Requested variant macosx is not provided by port python_select. DEBUG: Executing variant darwin_9 provides darwin_9 DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! python_select 0.3_0 >= python_select 0.3_0 DEBUG: No need to upgrade! glib2 2.22.5_0 >= glib2 2.22.5_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/dbus DEBUG: epoch: in tree: 0 installed: 0 DEBUG: dbus 1.2.16_1 exists in the ports tree DEBUG: dbus 1.2.16_1 +universal is the latest installed DEBUG: dbus 1.2.16_1 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/dbus DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port dbus. DEBUG: Requested variant i386 is not provided by port dbus. DEBUG: Requested variant macosx is not provided by port dbus. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! dbus 1.2.16_1 >= dbus 1.2.16_1 DEBUG: Attempting ln -sf /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_dbus-glib/work /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/dbus-glib/work ---> Computing dependencies for dbus-glib DEBUG: Searching for dependency: expat DEBUG: Found Dependency: receipt exists for expat DEBUG: Searching for dependency: libiconv DEBUG: Found Dependency: receipt exists for libiconv DEBUG: Searching for dependency: glib2 DEBUG: Found Dependency: receipt exists for glib2 DEBUG: Searching for dependency: dbus DEBUG: Found Dependency: receipt exists for dbus DEBUG: Searching for dependency: gettext DEBUG: Found Dependency: receipt exists for gettext DEBUG: Searching for dependency: pkgconfig DEBUG: Found Dependency: receipt exists for pkgconfig DEBUG: Executing org.macports.main (dbus-glib) ---> Fetching dbus-glib DEBUG: Executing org.macports.fetch (dbus-glib) ---> Verifying checksum(s) for dbus-glib DEBUG: Executing org.macports.checksum (dbus-glib) ---> Checksumming dbus-glib-0.86.tar.gz DEBUG: Correct (md5) checksum for dbus-glib-0.86.tar.gz DEBUG: Correct (sha1) checksum for dbus-glib-0.86.tar.gz DEBUG: Correct (rmd160) checksum for dbus-glib-0.86.tar.gz ---> Extracting dbus-glib DEBUG: Executing org.macports.extract (dbus-glib) ---> Extracting dbus-glib-0.86.tar.gz DEBUG: setting option extract.args to /opt/local/var/macports/distfiles/dbus-glib/dbus-glib-0.86.tar.gz DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.5' DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_dbus-glib/work" && /usr/bin/gzip -dc /opt/local/var/macports/distfiles/dbus-glib/dbus-glib-0.86.tar.gz | /usr/bin/gnutar --no-same-owner -xf -' DEBUG: Executing org.macports.patch (dbus-glib) ---> Configuring dbus-glib DEBUG: Using compiler 'Mac OS X gcc 4.0' DEBUG: Executing org.macports.configure (dbus-glib) ---> Configuring dbus-glib for architecture ppc DEBUG: Environment: CFLAGS='-O2 -arch ppc' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-O2 -arch ppc' MACOSX_DEPLOYMENT_TARGET='10.5' CXX='/usr/bin/g++-4.0' F90FLAGS='-O2' LDFLAGS='-L/opt/local/lib -arch ppc' OBJC='/usr/bin/gcc-4.0' FCFLAGS='-O2' INSTALL='/usr/bin/install -c' OBJCFLAGS='-O2 -arch ppc' FFLAGS='-O2' CC='/usr/bin/gcc-4.0' DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_dbus-glib/work/dbus-glib-0.86-ppc" && ./configure --prefix=/opt/local --disable-dependency-tracking --disable-doxygen-docs --disable-dependency-tracking --host=powerpc-apple-darwin9.8.0' configure: WARNING: If you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used. checking build system type... i386-apple-darwin9.8.0 checking host system type... powerpc-apple-darwin9.8.0 checking target system type... powerpc-apple-darwin9.8.0 checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for powerpc-apple-darwin9.8.0-strip... no checking for strip... strip checking for a thread-safe mkdir -p... /opt/local/bin/gmkdir -p checking for gawk... no checking for mawk... no checking for nawk... no checking for awk... awk checking whether make sets $(MAKE)... yes checking whether to enable maintainer-specific portions of Makefiles... no checking for powerpc-apple-darwin9.8.0-gcc... /usr/bin/gcc-4.0 checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether /usr/bin/gcc-4.0 accepts -g... yes checking for /usr/bin/gcc-4.0 option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of /usr/bin/gcc-4.0... none checking for library containing strerror... none required checking how to run the C preprocessor... /usr/bin/gcc-4.0 -E checking for grep that handles long lines and -e... /opt/local/bin/grep checking for egrep... /opt/local/bin/grep -E checking for ANSI C header files... yes checking whether gcc understands -Wfloat-equal... yes checking for a sed that does not truncate output... /opt/local/bin/gsed checking for fgrep... /opt/local/bin/grep -F checking for ld used by /usr/bin/gcc-4.0... /usr/libexec/gcc/i686-apple-darwin9/4.0.1/ld checking if the linker (/usr/libexec/gcc/i686-apple-darwin9/4.0.1/ld) is GNU ld... no checking for BSD- or MS-compatible name lister (nm)... no checking for powerpc-apple-darwin9.8.0-dumpbin... no checking for powerpc-apple-darwin9.8.0-link... no checking for dumpbin... no checking for link... link -dump -symbols checking the name lister (link -dump -symbols) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 196608 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking for /usr/libexec/gcc/i686-apple-darwin9/4.0.1/ld option to reload object files... -r checking for powerpc-apple-darwin9.8.0-objdump... no checking for objdump... no checking how to recognize dependent libraries... pass_all checking for powerpc-apple-darwin9.8.0-ar... no checking for ar... ar checking for powerpc-apple-darwin9.8.0-strip... strip checking for powerpc-apple-darwin9.8.0-ranlib... no checking for ranlib... ranlib checking command to parse link -dump -symbols output from /usr/bin/gcc-4.0 object... failed checking for powerpc-apple-darwin9.8.0-dsymutil... no checking for dsymutil... dsymutil checking for powerpc-apple-darwin9.8.0-nmedit... no checking for nmedit... nmedit checking for powerpc-apple-darwin9.8.0-lipo... no checking for lipo... lipo checking for powerpc-apple-darwin9.8.0-otool... no checking for otool... otool checking for powerpc-apple-darwin9.8.0-otool64... no checking for otool64... no checking for -single_module linker flag... no checking for -exported_symbols_list linker flag... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if /usr/bin/gcc-4.0 supports -fno-rtti -fno-exceptions... no checking for /usr/bin/gcc-4.0 option to produce PIC... -fno-common -DPIC checking if /usr/bin/gcc-4.0 PIC flag -fno-common -DPIC works... yes checking if /usr/bin/gcc-4.0 static flag -static works... no checking if /usr/bin/gcc-4.0 supports -c -o file.o... yes checking if /usr/bin/gcc-4.0 supports -c -o file.o... (cached) yes checking whether the /usr/bin/gcc-4.0 linker (/usr/libexec/gcc/i686-apple-darwin9/4.0.1/ld) supports shared libraries... yes checking dynamic linker characteristics... darwin9.8.0 dyld checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for library containing socket... none required checking whether socklen_t is defined... yes checking abstract socket namespace... no checking locale.h usability... yes checking locale.h presence... yes checking for locale.h... yes checking for LC_MESSAGES... yes checking libintl.h usability... yes checking libintl.h presence... yes checking for libintl.h... yes checking for ngettext in libc... no checking for bindtextdomain in -lintl... yes checking for ngettext in -lintl... yes checking for dgettext in -lintl... yes checking for bind_textdomain_codeset... yes checking for msgfmt... /opt/local/bin/msgfmt checking for dcgettext... yes checking if msgfmt accepts -c... yes checking for gmsgfmt... /opt/local/bin/msgfmt checking for xgettext... /opt/local/bin/xgettext ./configure: line 13694: ./po/POTFILES.in: No such file or directory checking for XML_ParserCreate_MM in -lexpat... yes checking expat.h usability... yes checking expat.h presence... yes checking for expat.h... yes checking for powerpc-apple-darwin9.8.0-pkg-config... no checking for pkg-config... /opt/local/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for DBUS... yes checking for DBUS_GLIB... yes checking for DBUS_GLIB_THREADS... yes checking whether to build gtk-doc documentation... no checking for gtkdoc-check... /opt/local/bin/gtkdoc-check checking for doxygen... no checking whether to build Doxygen documentation... yes configure: creating ./config.status config.status: creating Makefile config.status: creating m4/Makefile config.status: creating doc/Makefile config.status: creating doc/reference/Makefile config.status: creating doc/reference/version.xml config.status: creating dbus/Makefile config.status: creating dbus/examples/Makefile config.status: creating dbus/examples/statemachine/Makefile config.status: creating test/Makefile config.status: creating test/core/Makefile config.status: creating test/interfaces/Makefile config.status: creating test/data/valid-service-files/debug-glib.service config.status: creating test/data/valid-service-files/debug-echo.service config.status: creating test/data/valid-service-files/interfaces-test.service config.status: creating tools/Makefile config.status: creating dbus-glib-1.pc config.status: creating dbus-glib-1-uninstalled.pc config.status: creating Doxyfile config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands config.status: executing default-1 commands D-BUS GLIB BINDINGS 0.86 ============== prefix: /opt/local exec_prefix: ${prefix} libdir: /opt/local/lib bindir: /opt/local/bin sysconfdir: /opt/local/etc localstatedir: /opt/local/var datadir: ${prefix}/share source code location: . compiler: /usr/bin/gcc-4.0 cflags: -O2 -arch ppc -Wall -Wchar-subscripts -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wcast-align -Wfloat-equal -Wsign-compare -fno-strict-aliasing cppflags: -I/opt/local/include Doxygen: no Maintainer mode: no gcc coverage profiling: no Building unit tests: no Building verbose mode: no Building assertions: no Building checks: yes Building Doxygen docs: no Building Gtk-doc docs: no Bash Completion: yes Gettext libs (empty OK): -lintl Using XML parser: 'make check' socket dir: ---> Configuring dbus-glib for architecture i386 DEBUG: Environment: CFLAGS='-O2 -arch i386' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-O2 -arch i386' MACOSX_DEPLOYMENT_TARGET='10.5' CXX='/usr/bin/g++-4.0' F90FLAGS='-O2 -m32' LDFLAGS='-L/opt/local/lib -arch i386' OBJC='/usr/bin/gcc-4.0' FCFLAGS='-O2 -m32' INSTALL='/usr/bin/install -c' OBJCFLAGS='-O2 -arch i386' FFLAGS='-O2 -m32' CC='/usr/bin/gcc-4.0' DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_dbus-glib/work/dbus-glib-0.86-i386" && ./configure --prefix=/opt/local --disable-dependency-tracking --disable-dependency-tracking --disable-doxygen-docs --disable-dependency-tracking ' checking build system type... i386-apple-darwin9.8.0 checking host system type... i386-apple-darwin9.8.0 checking target system type... i386-apple-darwin9.8.0 checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /opt/local/bin/gmkdir -p checking for gawk... no checking for mawk... no checking for nawk... no checking for awk... awk checking whether make sets $(MAKE)... yes checking whether to enable maintainer-specific portions of Makefiles... no checking for gcc... /usr/bin/gcc-4.0 checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether /usr/bin/gcc-4.0 accepts -g... yes checking for /usr/bin/gcc-4.0 option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of /usr/bin/gcc-4.0... none checking for library containing strerror... none required checking how to run the C preprocessor... /usr/bin/gcc-4.0 -E checking for grep that handles long lines and -e... /opt/local/bin/grep checking for egrep... /opt/local/bin/grep -E checking for ANSI C header files... yes checking whether gcc understands -Wfloat-equal... yes checking for a sed that does not truncate output... /opt/local/bin/gsed checking for fgrep... /opt/local/bin/grep -F checking for ld used by /usr/bin/gcc-4.0... /usr/libexec/gcc/i686-apple-darwin9/4.0.1/ld checking if the linker (/usr/libexec/gcc/i686-apple-darwin9/4.0.1/ld) is GNU ld... no checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -p checking the name lister (/usr/bin/nm -p) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 196608 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking for /usr/libexec/gcc/i686-apple-darwin9/4.0.1/ld option to reload object files... -r checking for objdump... no checking how to recognize dependent libraries... pass_all checking for ar... ar checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -p output from /usr/bin/gcc-4.0 object... ok checking for dsymutil... dsymutil checking for nmedit... nmedit checking for lipo... lipo checking for otool... otool checking for otool64... no checking for -single_module linker flag... no checking for -exported_symbols_list linker flag... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if /usr/bin/gcc-4.0 supports -fno-rtti -fno-exceptions... no checking for /usr/bin/gcc-4.0 option to produce PIC... -fno-common -DPIC checking if /usr/bin/gcc-4.0 PIC flag -fno-common -DPIC works... yes checking if /usr/bin/gcc-4.0 static flag -static works... no checking if /usr/bin/gcc-4.0 supports -c -o file.o... yes checking if /usr/bin/gcc-4.0 supports -c -o file.o... (cached) yes checking whether the /usr/bin/gcc-4.0 linker (/usr/libexec/gcc/i686-apple-darwin9/4.0.1/ld) supports shared libraries... yes checking dynamic linker characteristics... darwin9.8.0 dyld checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for library containing socket... none required checking whether socklen_t is defined... yes checking abstract socket namespace... no checking locale.h usability... yes checking locale.h presence... yes checking for locale.h... yes checking for LC_MESSAGES... yes checking libintl.h usability... yes checking libintl.h presence... yes checking for libintl.h... yes checking for ngettext in libc... no checking for bindtextdomain in -lintl... yes checking for ngettext in -lintl... yes checking for dgettext in -lintl... yes checking for bind_textdomain_codeset... yes checking for msgfmt... /opt/local/bin/msgfmt checking for dcgettext... yes checking if msgfmt accepts -c... yes checking for gmsgfmt... /opt/local/bin/msgfmt checking for xgettext... /opt/local/bin/xgettext ./configure: line 13694: ./po/POTFILES.in: No such file or directory checking for XML_ParserCreate_MM in -lexpat... yes checking expat.h usability... yes checking expat.h presence... yes checking for expat.h... yes checking for pkg-config... /opt/local/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for DBUS... yes checking for DBUS_GLIB... yes checking for DBUS_GLIB_THREADS... yes checking whether to build gtk-doc documentation... no checking for gtkdoc-check... /opt/local/bin/gtkdoc-check checking for doxygen... no checking whether to build Doxygen documentation... yes configure: creating ./config.status config.status: creating Makefile config.status: creating m4/Makefile config.status: creating doc/Makefile config.status: creating doc/reference/Makefile config.status: creating doc/reference/version.xml config.status: creating dbus/Makefile config.status: creating dbus/examples/Makefile config.status: creating dbus/examples/statemachine/Makefile config.status: creating test/Makefile config.status: creating test/core/Makefile config.status: creating test/interfaces/Makefile config.status: creating test/data/valid-service-files/debug-glib.service config.status: creating test/data/valid-service-files/debug-echo.service config.status: creating test/data/valid-service-files/interfaces-test.service config.status: creating tools/Makefile config.status: creating dbus-glib-1.pc config.status: creating dbus-glib-1-uninstalled.pc config.status: creating Doxyfile config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands config.status: executing default-1 commands D-BUS GLIB BINDINGS 0.86 ============== prefix: /opt/local exec_prefix: ${prefix} libdir: /opt/local/lib bindir: /opt/local/bin sysconfdir: /opt/local/etc localstatedir: /opt/local/var datadir: ${prefix}/share source code location: . compiler: /usr/bin/gcc-4.0 cflags: -O2 -arch i386 -Wall -Wchar-subscripts -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wcast-align -Wfloat-equal -Wsign-compare -fno-strict-aliasing cppflags: -I/opt/local/include Doxygen: no Maintainer mode: no gcc coverage profiling: no Building unit tests: no Building verbose mode: no Building assertions: no Building checks: yes Building Doxygen docs: no Building Gtk-doc docs: no Bash Completion: yes Gettext libs (empty OK): -lintl Using XML parser: 'make check' socket dir: DEBUG: Executing proc-post-org.macports.configure-configure-0 ---> Building dbus-glib DEBUG: Executing org.macports.build (dbus-glib) ---> Building dbus-glib for architecture ppc DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.5' DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_dbus-glib/work/dbus-glib-0.86-ppc" && /usr/bin/make -j1 all' /usr/bin/make all-recursive Making all in dbus /usr/bin/make all-recursive Making all in . CC dbus-glib.lo /bin/sh ../libtool --silent --tag=CC --mode=compile /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -I. -I.. -I.. -I.. -I/opt/local/include/dbus-1.0 -I/opt/local/lib/dbus-1.0/include -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -DDBUS_COMPILATION=1 -DDBUS_LOCALEDIR=\"/opt/local/share/locale\" -I/opt/local/include -O2 -arch ppc -Wall -Wchar-subscripts -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wcast-align -Wfloat-equal -Wsign-compare -fno-strict-aliasing -c -o dbus-glib.lo dbus-glib.c CC dbus-gmain.lo /bin/sh ../libtool --silent --tag=CC --mode=compile /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -I. -I.. -I.. -I.. -I/opt/local/include/dbus-1.0 -I/opt/local/lib/dbus-1.0/include -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -DDBUS_COMPILATION=1 -DDBUS_LOCALEDIR=\"/opt/local/share/locale\" -I/opt/local/include -O2 -arch ppc -Wall -Wchar-subscripts -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wcast-align -Wfloat-equal -Wsign-compare -fno-strict-aliasing -c -o dbus-gmain.lo dbus-gmain.c CC dbus-gmarshal.lo /bin/sh ../libtool --silent --tag=CC --mode=compile /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -I. -I.. -I.. -I.. -I/opt/local/include/dbus-1.0 -I/opt/local/lib/dbus-1.0/include -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -DDBUS_COMPILATION=1 -DDBUS_LOCALEDIR=\"/opt/local/share/locale\" -I/opt/local/include -O2 -arch ppc -Wall -Wchar-subscripts -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wcast-align -Wfloat-equal -Wsign-compare -fno-strict-aliasing -c -o dbus-gmarshal.lo dbus-gmarshal.c CC dbus-gobject.lo /bin/sh ../libtool --silent --tag=CC --mode=compile /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -I. -I.. -I.. -I.. -I/opt/local/include/dbus-1.0 -I/opt/local/lib/dbus-1.0/include -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -DDBUS_COMPILATION=1 -DDBUS_LOCALEDIR=\"/opt/local/share/locale\" -I/opt/local/include -O2 -arch ppc -Wall -Wchar-subscripts -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wcast-align -Wfloat-equal -Wsign-compare -fno-strict-aliasing -c -o dbus-gobject.lo dbus-gobject.c dbus-gobject.c: In function 'dbus_set_g_error': dbus-gobject.c:2128: warning: control may reach end of non-void function 'dbus_error_to_gerror_code' being inlined CC dbus-gproxy.lo /bin/sh ../libtool --silent --tag=CC --mode=compile /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -I. -I.. -I.. -I.. -I/opt/local/include/dbus-1.0 -I/opt/local/lib/dbus-1.0/include -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -DDBUS_COMPILATION=1 -DDBUS_LOCALEDIR=\"/opt/local/share/locale\" -I/opt/local/include -O2 -arch ppc -Wall -Wchar-subscripts -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wcast-align -Wfloat-equal -Wsign-compare -fno-strict-aliasing -c -o dbus-gproxy.lo dbus-gproxy.c CC dbus-gtest.lo /bin/sh ../libtool --silent --tag=CC --mode=compile /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -I. -I.. -I.. -I.. -I/opt/local/include/dbus-1.0 -I/opt/local/lib/dbus-1.0/include -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -DDBUS_COMPILATION=1 -DDBUS_LOCALEDIR=\"/opt/local/share/locale\" -I/opt/local/include -O2 -arch ppc -Wall -Wchar-subscripts -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wcast-align -Wfloat-equal -Wsign-compare -fno-strict-aliasing -c -o dbus-gtest.lo dbus-gtest.c CC dbus-gvalue.lo /bin/sh ../libtool --silent --tag=CC --mode=compile /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -I. -I.. -I.. -I.. -I/opt/local/include/dbus-1.0 -I/opt/local/lib/dbus-1.0/include -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -DDBUS_COMPILATION=1 -DDBUS_LOCALEDIR=\"/opt/local/share/locale\" -I/opt/local/include -O2 -arch ppc -Wall -Wchar-subscripts -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wcast-align -Wfloat-equal -Wsign-compare -fno-strict-aliasing -c -o dbus-gvalue.lo dbus-gvalue.c CC dbus-gthread.lo /bin/sh ../libtool --silent --tag=CC --mode=compile /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -I. -I.. -I.. -I.. -I/opt/local/include/dbus-1.0 -I/opt/local/lib/dbus-1.0/include -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -DDBUS_COMPILATION=1 -DDBUS_LOCALEDIR=\"/opt/local/share/locale\" -I/opt/local/include -O2 -arch ppc -Wall -Wchar-subscripts -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wcast-align -Wfloat-equal -Wsign-compare -fno-strict-aliasing -c -o dbus-gthread.lo dbus-gthread.c CC dbus-gtype-specialized.lo /bin/sh ../libtool --silent --tag=CC --mode=compile /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -I. -I.. -I.. -I.. -I/opt/local/include/dbus-1.0 -I/opt/local/lib/dbus-1.0/include -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -DDBUS_COMPILATION=1 -DDBUS_LOCALEDIR=\"/opt/local/share/locale\" -I/opt/local/include -O2 -arch ppc -Wall -Wchar-subscripts -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wcast-align -Wfloat-equal -Wsign-compare -fno-strict-aliasing -c -o dbus-gtype-specialized.lo dbus-gtype-specialized.c CC dbus-gutils.lo /bin/sh ../libtool --silent --tag=CC --mode=compile /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -I. -I.. -I.. -I.. -I/opt/local/include/dbus-1.0 -I/opt/local/lib/dbus-1.0/include -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -DDBUS_COMPILATION=1 -DDBUS_LOCALEDIR=\"/opt/local/share/locale\" -I/opt/local/include -O2 -arch ppc -Wall -Wchar-subscripts -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wcast-align -Wfloat-equal -Wsign-compare -fno-strict-aliasing -c -o dbus-gutils.lo dbus-gutils.c CC dbus-gsignature.lo /bin/sh ../libtool --silent --tag=CC --mode=compile /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -I. -I.. -I.. -I.. -I/opt/local/include/dbus-1.0 -I/opt/local/lib/dbus-1.0/include -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -DDBUS_COMPILATION=1 -DDBUS_LOCALEDIR=\"/opt/local/share/locale\" -I/opt/local/include -O2 -arch ppc -Wall -Wchar-subscripts -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wcast-align -Wfloat-equal -Wsign-compare -fno-strict-aliasing -c -o dbus-gsignature.lo dbus-gsignature.c CC dbus-gvalue-utils.lo /bin/sh ../libtool --silent --tag=CC --mode=compile /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -I. -I.. -I.. -I.. -I/opt/local/include/dbus-1.0 -I/opt/local/lib/dbus-1.0/include -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -DDBUS_COMPILATION=1 -DDBUS_LOCALEDIR=\"/opt/local/share/locale\" -I/opt/local/include -O2 -arch ppc -Wall -Wchar-subscripts -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wcast-align -Wfloat-equal -Wsign-compare -fno-strict-aliasing -c -o dbus-gvalue-utils.lo dbus-gvalue-utils.c CCLD libdbus-glib-1.la ../libtool: eval: line 941: syntax error near unexpected token `|' ../libtool: eval: line 941: `link -dump -symbols .libs/dbus-glib.o .libs/dbus-gmain.o .libs/dbus-gmarshal.o .libs/dbus-gobject.o .libs/dbus-gproxy.o .libs/dbus-gtest.o .libs/dbus-gvalue.o .libs/dbus-gthread.o .libs/dbus-gtype-specialized.o .libs/dbus-gutils.o .libs/dbus-gsignature.o .libs/dbus-gvalue-utils.o | | /opt/local/bin/gsed 's/.* //' | sort | uniq > .libs/libdbus-glib-1.exp' make[4]: *** [libdbus-glib-1.la] Error 1 make[3]: *** [all-recursive] Error 1 make[2]: *** [all] Error 2 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_dbus-glib/work/dbus-glib-0.86-ppc" && /usr/bin/make -j1 all " returned error 2 DEBUG: Backtrace: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_dbus-glib/work/dbus-glib-0.86-ppc" && /usr/bin/make -j1 all " returned error 2 while executing "$procedure $targetname" Warning: the following items did not execute (for dbus-glib): org.macports.destroot org.macports.build DEBUG: Error: Unable to upgrade port: 1