tconant:~ tconant$ sudo port -d install gst-plugins-good Password: DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gst-plugins-good DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gst-plugins-good DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: adding the default universal variant DEBUG: Requested variant darwin is not provided by port gst-plugins-good. DEBUG: Requested variant i386 is not provided by port gst-plugins-good. DEBUG: Requested variant macosx is not provided by port gst-plugins-good. DEBUG: Executing variant darwin_i386 provides darwin_i386 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gst-plugins-base DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gst-plugins-base 0.10.29_0 exists in the ports tree DEBUG: gst-plugins-base 0.10.29_0 is the latest installed DEBUG: gst-plugins-base 0.10.29_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gst-plugins-base DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port gst-plugins-base. DEBUG: Requested variant i386 is not provided by port gst-plugins-base. DEBUG: Requested variant macosx is not provided by port gst-plugins-base. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf DEBUG: epoch: in tree: 0 installed: 0 DEBUG: autoconf 2.65_1 exists in the ports tree DEBUG: autoconf 2.65_1 is the latest installed DEBUG: autoconf 2.65_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port autoconf. DEBUG: Requested variant i386 is not provided by port autoconf. DEBUG: Requested variant macosx is not provided by port autoconf. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: perl5 5.8.9_0 exists in the ports tree DEBUG: perl5 5.8.9_0 is the latest installed DEBUG: perl5 5.8.9_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: not using configure, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port perl5. DEBUG: Requested variant i386 is not provided by port perl5. DEBUG: Requested variant macosx is not provided by port perl5. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: perl5.8 5.8.9_3 exists in the ports tree DEBUG: perl5.8 5.8.9_3 is the latest installed DEBUG: perl5.8 5.8.9_3 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port perl5.8. DEBUG: Requested variant i386 is not provided by port perl5.8. DEBUG: Requested variant macosx is not provided by port perl5.8. DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3 DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: m4 1.4.14_0 exists in the ports tree DEBUG: m4 1.4.14_0 is the latest installed DEBUG: m4 1.4.14_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port m4. DEBUG: Requested variant i386 is not provided by port m4. DEBUG: Requested variant macosx is not provided by port m4. DEBUG: No need to upgrade! m4 1.4.14_0 >= m4 1.4.14_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man DEBUG: epoch: in tree: 0 installed: 0 DEBUG: help2man 1.37.1_1 exists in the ports tree DEBUG: help2man 1.37.1_1 is the latest installed DEBUG: help2man 1.37.1_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port help2man. DEBUG: Requested variant i386 is not provided by port help2man. DEBUG: Requested variant macosx is not provided by port help2man. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext DEBUG: epoch: in tree: 0 installed: 0 DEBUG: p5-locale-gettext 1.05_2 exists in the ports tree DEBUG: p5-locale-gettext 1.05_2 is the latest installed DEBUG: p5-locale-gettext 1.05_2 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port p5-locale-gettext. DEBUG: Requested variant i386 is not provided by port p5-locale-gettext. DEBUG: Requested variant macosx is not provided by port p5-locale-gettext. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gettext 0.17_4 exists in the ports tree DEBUG: gettext 0.17_4 is the latest installed DEBUG: gettext 0.17_4 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port gettext. DEBUG: Requested variant i386 is not provided by port gettext. DEBUG: Requested variant macosx is not provided by port gettext. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libiconv 1.13.1_0 exists in the ports tree DEBUG: libiconv 1.13.1_0 is the latest installed DEBUG: libiconv 1.13.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port libiconv. DEBUG: Requested variant i386 is not provided by port libiconv. DEBUG: Requested variant macosx is not provided by port libiconv. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gperf 3.0.4_0 exists in the ports tree DEBUG: gperf 3.0.4_0 is the latest installed DEBUG: gperf 3.0.4_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port gperf. DEBUG: Requested variant i386 is not provided by port gperf. DEBUG: Requested variant macosx is not provided by port gperf. DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0 DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses DEBUG: epoch: in tree: 0 installed: 0 DEBUG: ncurses 5.7_0 exists in the ports tree DEBUG: ncurses 5.7_0 +darwin_10 is the latest installed DEBUG: ncurses 5.7_0 +darwin_10 is active DEBUG: Merging existing variants darwin_10 into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port ncurses. DEBUG: Requested variant i386 is not provided by port ncurses. DEBUG: Requested variant macosx is not provided by port ncurses. DEBUG: Executing variant darwin_10 provides darwin_10 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw DEBUG: epoch: in tree: 0 installed: 0 DEBUG: ncursesw 5.7_0 exists in the ports tree DEBUG: ncursesw 5.7_0 +darwin_10 is the latest installed DEBUG: ncursesw 5.7_0 +darwin_10 is active DEBUG: Merging existing variants darwin_10 into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port ncursesw. DEBUG: Requested variant i386 is not provided by port ncursesw. DEBUG: Requested variant macosx is not provided by port ncursesw. DEBUG: Executing variant darwin_10 provides darwin_10 DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0 DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat DEBUG: epoch: in tree: 0 installed: 0 DEBUG: expat 2.0.1_0 exists in the ports tree DEBUG: expat 2.0.1_0 is the latest installed DEBUG: expat 2.0.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port expat. DEBUG: Requested variant i386 is not provided by port expat. DEBUG: Requested variant macosx is not provided by port expat. DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0 DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4 DEBUG: No need to upgrade! p5-locale-gettext 1.05_2 >= p5-locale-gettext 1.05_2 DEBUG: No need to upgrade! help2man 1.37.1_1 >= help2man 1.37.1_1 DEBUG: No need to upgrade! autoconf 2.65_1 >= autoconf 2.65_1 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake DEBUG: epoch: in tree: 0 installed: 0 DEBUG: automake 1.11.1_0 exists in the ports tree DEBUG: automake 1.11.1_0 is the latest installed DEBUG: automake 1.11.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port automake. DEBUG: Requested variant i386 is not provided by port automake. DEBUG: Requested variant macosx is not provided by port automake. DEBUG: No need to upgrade! automake 1.11.1_0 >= automake 1.11.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libtool 2.2.6b_1 exists in the ports tree DEBUG: libtool 2.2.6b_1 +darwin is the latest installed DEBUG: libtool 2.2.6b_1 +darwin is active DEBUG: Merging existing variants darwin into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: adding the default universal variant DEBUG: Requested variant i386 is not provided by port libtool. DEBUG: Requested variant macosx is not provided by port libtool. DEBUG: Executing variant darwin provides darwin DEBUG: No need to upgrade! libtool 2.2.6b_1 >= libtool 2.2.6b_1 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gstreamer DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gstreamer 0.10.29_0 exists in the ports tree DEBUG: gstreamer 0.10.29_0 is the latest installed DEBUG: gstreamer 0.10.29_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gstreamer DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port gstreamer. DEBUG: Requested variant i386 is not provided by port gstreamer. DEBUG: Requested variant macosx is not provided by port gstreamer. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/gzip DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gzip 1.4_0 exists in the ports tree DEBUG: gzip 1.4_0 is the latest installed DEBUG: gzip 1.4_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/gzip DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port gzip. DEBUG: Requested variant i386 is not provided by port gzip. DEBUG: Requested variant macosx is not provided by port gzip. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/texinfo DEBUG: epoch: in tree: 0 installed: 0 DEBUG: texinfo 4.13_0 exists in the ports tree DEBUG: texinfo 4.13_0 is the latest installed DEBUG: texinfo 4.13_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/texinfo DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port texinfo. DEBUG: Requested variant i386 is not provided by port texinfo. DEBUG: Requested variant macosx is not provided by port texinfo. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/lzmautils DEBUG: epoch: in tree: 0 installed: 0 DEBUG: lzmautils 4.32.7_1 exists in the ports tree DEBUG: lzmautils 4.32.7_1 is the latest installed DEBUG: lzmautils 4.32.7_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/lzmautils DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port lzmautils. DEBUG: Requested variant i386 is not provided by port lzmautils. DEBUG: Requested variant macosx is not provided by port lzmautils. DEBUG: No need to upgrade! lzmautils 4.32.7_1 >= lzmautils 4.32.7_1 DEBUG: No need to upgrade! texinfo 4.13_0 >= texinfo 4.13_0 DEBUG: No need to upgrade! gzip 1.4_0 >= gzip 1.4_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig DEBUG: epoch: in tree: 0 installed: 0 DEBUG: pkgconfig 0.23_1 exists in the ports tree DEBUG: pkgconfig 0.23_1 is the latest installed DEBUG: pkgconfig 0.23_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port pkgconfig. DEBUG: Requested variant i386 is not provided by port pkgconfig. DEBUG: Requested variant macosx is not provided by port pkgconfig. DEBUG: No need to upgrade! pkgconfig 0.23_1 >= pkgconfig 0.23_1 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/bison DEBUG: epoch: in tree: 0 installed: 0 DEBUG: bison 2.4.2_0 exists in the ports tree DEBUG: bison 2.4.2_0 is the latest installed DEBUG: bison 2.4.2_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/bison DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port bison. DEBUG: Requested variant i386 is not provided by port bison. DEBUG: Requested variant macosx is not provided by port bison. DEBUG: No need to upgrade! bison 2.4.2_0 >= bison 2.4.2_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/flex DEBUG: epoch: in tree: 0 installed: 0 DEBUG: flex 2.5.35_0 exists in the ports tree DEBUG: flex 2.5.35_0 is the latest installed DEBUG: flex 2.5.35_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/flex DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port flex. DEBUG: Requested variant i386 is not provided by port flex. DEBUG: Requested variant macosx is not provided by port flex. DEBUG: No need to upgrade! flex 2.5.35_0 >= flex 2.5.35_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/glib2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: glib2 2.22.5_0 exists in the ports tree DEBUG: glib2 2.22.5_0 +darwin is the latest installed DEBUG: glib2 2.22.5_0 +darwin is active DEBUG: Merging existing variants darwin into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/glib2 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: adding the default universal variant DEBUG: Requested variant i386 is not provided by port glib2. DEBUG: Requested variant macosx is not provided by port glib2. DEBUG: Executing variant darwin provides darwin DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/python_select DEBUG: python_select is *not* installed by MacPorts DEBUG: Searching for dependency: python_select DEBUG: Didn't find receipt, going to depspec regex for: python_select DEBUG: Found Dependency: path: /usr/bin filename: python regex: ^python$ DEBUG: python_select not installed, soft dependency satisfied DEBUG: No need to upgrade! glib2 2.22.5_0 >= glib2 2.22.5_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libxml2 2.7.7_0 exists in the ports tree DEBUG: libxml2 2.7.7_0 is the latest installed DEBUG: libxml2 2.7.7_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port libxml2. DEBUG: Requested variant i386 is not provided by port libxml2. DEBUG: Requested variant macosx is not provided by port libxml2. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib DEBUG: epoch: in tree: 0 installed: 0 DEBUG: zlib 1.2.5_0 exists in the ports tree DEBUG: zlib 1.2.5_0 is the latest installed DEBUG: zlib 1.2.5_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port zlib. DEBUG: Requested variant i386 is not provided by port zlib. DEBUG: Requested variant macosx is not provided by port zlib. DEBUG: No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0 DEBUG: No need to upgrade! libxml2 2.7.7_0 >= libxml2 2.7.7_0 DEBUG: No need to upgrade! gstreamer 0.10.29_0 >= gstreamer 0.10.29_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gnome-vfs DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gnome-vfs 2.24.3_0 exists in the ports tree DEBUG: gnome-vfs 2.24.3_0 is the latest installed DEBUG: gnome-vfs 2.24.3_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gnome-vfs DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port gnome-vfs. DEBUG: Requested variant i386 is not provided by port gnome-vfs. DEBUG: Requested variant macosx is not provided by port gnome-vfs. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gconf DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gconf 2.26.2_0 exists in the ports tree DEBUG: gconf 2.26.2_0 is the latest installed DEBUG: gconf 2.26.2_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gconf DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port gconf. DEBUG: Requested variant i386 is not provided by port gconf. DEBUG: Requested variant macosx is not provided by port gconf. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/intltool DEBUG: epoch: in tree: 0 installed: 0 DEBUG: intltool 0.40.6_0 exists in the ports tree DEBUG: intltool 0.40.6_0 is the latest installed DEBUG: intltool 0.40.6_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/intltool DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port intltool. DEBUG: Requested variant i386 is not provided by port intltool. DEBUG: Requested variant macosx is not provided by port intltool. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gnome-common DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gnome-common 2.26.0_0 exists in the ports tree DEBUG: gnome-common 2.26.0_0 is the latest installed DEBUG: gnome-common 2.26.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gnome-common DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port gnome-common. DEBUG: Requested variant i386 is not provided by port gnome-common. DEBUG: Requested variant macosx is not provided by port gnome-common. DEBUG: No need to upgrade! gnome-common 2.26.0_0 >= gnome-common 2.26.0_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-xml-parser DEBUG: epoch: in tree: 0 installed: 0 DEBUG: p5-xml-parser 2.36_0 exists in the ports tree DEBUG: p5-xml-parser 2.36_0 is the latest installed DEBUG: p5-xml-parser 2.36_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-xml-parser DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port p5-xml-parser. DEBUG: Requested variant i386 is not provided by port p5-xml-parser. DEBUG: Requested variant macosx is not provided by port p5-xml-parser. DEBUG: No need to upgrade! p5-xml-parser 2.36_0 >= p5-xml-parser 2.36_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-getopt-long DEBUG: epoch: in tree: 0 installed: 0 DEBUG: p5-getopt-long 2.38_0 exists in the ports tree DEBUG: p5-getopt-long 2.38_0 is the latest installed DEBUG: p5-getopt-long 2.38_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-getopt-long DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port p5-getopt-long. DEBUG: Requested variant i386 is not provided by port p5-getopt-long. DEBUG: Requested variant macosx is not provided by port p5-getopt-long. DEBUG: No need to upgrade! p5-getopt-long 2.38_0 >= p5-getopt-long 2.38_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-pathtools DEBUG: epoch: in tree: 0 installed: 0 DEBUG: p5-pathtools 3.31_0 exists in the ports tree DEBUG: p5-pathtools 3.31_0 is the latest installed DEBUG: p5-pathtools 3.31_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-pathtools DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port p5-pathtools. DEBUG: Requested variant i386 is not provided by port p5-pathtools. DEBUG: Requested variant macosx is not provided by port p5-pathtools. DEBUG: No need to upgrade! p5-pathtools 3.31_0 >= p5-pathtools 3.31_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-scalar-list-utils DEBUG: epoch: in tree: 0 installed: 0 DEBUG: p5-scalar-list-utils 1.23_0 exists in the ports tree DEBUG: p5-scalar-list-utils 1.23_0 is the latest installed DEBUG: p5-scalar-list-utils 1.23_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-scalar-list-utils DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port p5-scalar-list-utils. DEBUG: Requested variant i386 is not provided by port p5-scalar-list-utils. DEBUG: Requested variant macosx is not provided by port p5-scalar-list-utils. DEBUG: No need to upgrade! p5-scalar-list-utils 1.23_0 >= p5-scalar-list-utils 1.23_0 DEBUG: No need to upgrade! intltool 0.40.6_0 >= intltool 0.40.6_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/gtk2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gtk2 2.18.8_0 exists in the ports tree DEBUG: gtk2 2.18.8_0 +x11 is the latest installed DEBUG: gtk2 2.18.8_0 +x11 is active DEBUG: Merging existing variants x11 into variants DEBUG: new fully merged portvariants: x11 + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/gtk2 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port gtk2. DEBUG: Requested variant i386 is not provided by port gtk2. DEBUG: Requested variant macosx is not provided by port gtk2. DEBUG: Executing variant x11 provides x11 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/cairo DEBUG: epoch: in tree: 0 installed: 0 DEBUG: cairo 1.8.10_0 exists in the ports tree DEBUG: cairo 1.8.10_0 +macosx is the latest installed DEBUG: cairo 1.8.10_0 +macosx is active DEBUG: Merging existing variants macosx into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/cairo DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port cairo. DEBUG: Requested variant i386 is not provided by port cairo. DEBUG: Executing variant macosx provides macosx DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpixman DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libpixman 0.18.0_0 exists in the ports tree DEBUG: libpixman 0.18.0_0 is the latest installed DEBUG: libpixman 0.18.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpixman DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port libpixman. DEBUG: Requested variant i386 is not provided by port libpixman. DEBUG: Requested variant macosx is not provided by port libpixman. DEBUG: No need to upgrade! libpixman 0.18.0_0 >= libpixman 0.18.0_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xrender 0.9.5_0 exists in the ports tree DEBUG: xrender 0.9.5_0 is the latest installed DEBUG: xrender 0.9.5_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xrender. DEBUG: Requested variant i386 is not provided by port xrender. DEBUG: Requested variant macosx is not provided by port xrender. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libX11 1.3.3_0 exists in the ports tree DEBUG: xorg-libX11 1.3.3_0 is the latest installed DEBUG: xorg-libX11 1.3.3_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libX11. DEBUG: Requested variant i386 is not provided by port xorg-libX11. DEBUG: Requested variant macosx is not provided by port xorg-libX11. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-util-macros DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-util-macros 1.7.0_0 exists in the ports tree DEBUG: xorg-util-macros 1.7.0_0 is the latest installed DEBUG: xorg-util-macros 1.7.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-util-macros DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-util-macros. DEBUG: Requested variant i386 is not provided by port xorg-util-macros. DEBUG: Requested variant macosx is not provided by port xorg-util-macros. DEBUG: No need to upgrade! xorg-util-macros 1.7.0_0 >= xorg-util-macros 1.7.0_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xtrans DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-xtrans 1.2.5_0 exists in the ports tree DEBUG: xorg-xtrans 1.2.5_0 is the latest installed DEBUG: xorg-xtrans 1.2.5_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xtrans DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-xtrans. DEBUG: Requested variant i386 is not provided by port xorg-xtrans. DEBUG: Requested variant macosx is not provided by port xorg-xtrans. DEBUG: No need to upgrade! xorg-xtrans 1.2.5_0 >= xorg-xtrans 1.2.5_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-bigreqsproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-bigreqsproto 1.1.0_0 exists in the ports tree DEBUG: xorg-bigreqsproto 1.1.0_0 is the latest installed DEBUG: xorg-bigreqsproto 1.1.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-bigreqsproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-bigreqsproto. DEBUG: Requested variant i386 is not provided by port xorg-bigreqsproto. DEBUG: Requested variant macosx is not provided by port xorg-bigreqsproto. DEBUG: No need to upgrade! xorg-bigreqsproto 1.1.0_0 >= xorg-bigreqsproto 1.1.0_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcmiscproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-xcmiscproto 1.2.0_0 exists in the ports tree DEBUG: xorg-xcmiscproto 1.2.0_0 is the latest installed DEBUG: xorg-xcmiscproto 1.2.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcmiscproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-xcmiscproto. DEBUG: Requested variant i386 is not provided by port xorg-xcmiscproto. DEBUG: Requested variant macosx is not provided by port xorg-xcmiscproto. DEBUG: No need to upgrade! xorg-xcmiscproto 1.2.0_0 >= xorg-xcmiscproto 1.2.0_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-xextproto 7.1.1_0 exists in the ports tree DEBUG: xorg-xextproto 7.1.1_0 is the latest installed DEBUG: xorg-xextproto 7.1.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-xextproto. DEBUG: Requested variant i386 is not provided by port xorg-xextproto. DEBUG: Requested variant macosx is not provided by port xorg-xextproto. DEBUG: No need to upgrade! xorg-xextproto 7.1.1_0 >= xorg-xextproto 7.1.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xf86bigfontproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-xf86bigfontproto 1.2.0_0 exists in the ports tree DEBUG: xorg-xf86bigfontproto 1.2.0_0 is the latest installed DEBUG: xorg-xf86bigfontproto 1.2.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xf86bigfontproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-xf86bigfontproto. DEBUG: Requested variant i386 is not provided by port xorg-xf86bigfontproto. DEBUG: Requested variant macosx is not provided by port xorg-xf86bigfontproto. DEBUG: No need to upgrade! xorg-xf86bigfontproto 1.2.0_0 >= xorg-xf86bigfontproto 1.2.0_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-inputproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-inputproto 2.0_0 exists in the ports tree DEBUG: xorg-inputproto 2.0_0 is the latest installed DEBUG: xorg-inputproto 2.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-inputproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-inputproto. DEBUG: Requested variant i386 is not provided by port xorg-inputproto. DEBUG: Requested variant macosx is not provided by port xorg-inputproto. DEBUG: No need to upgrade! xorg-inputproto 2.0_0 >= xorg-inputproto 2.0_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXdmcp 1.0.3_0 exists in the ports tree DEBUG: xorg-libXdmcp 1.0.3_0 is the latest installed DEBUG: xorg-libXdmcp 1.0.3_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXdmcp. DEBUG: Requested variant i386 is not provided by port xorg-libXdmcp. DEBUG: Requested variant macosx is not provided by port xorg-libXdmcp. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-xproto 7.0.16_0 exists in the ports tree DEBUG: xorg-xproto 7.0.16_0 is the latest installed DEBUG: xorg-xproto 7.0.16_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-xproto. DEBUG: Requested variant i386 is not provided by port xorg-xproto. DEBUG: Requested variant macosx is not provided by port xorg-xproto. DEBUG: No need to upgrade! xorg-xproto 7.0.16_0 >= xorg-xproto 7.0.16_0 DEBUG: No need to upgrade! xorg-libXdmcp 1.0.3_0 >= xorg-libXdmcp 1.0.3_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXau 1.0.5_0 exists in the ports tree DEBUG: xorg-libXau 1.0.5_0 is the latest installed DEBUG: xorg-libXau 1.0.5_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXau. DEBUG: Requested variant i386 is not provided by port xorg-libXau. DEBUG: Requested variant macosx is not provided by port xorg-libXau. DEBUG: No need to upgrade! xorg-libXau 1.0.5_0 >= xorg-libXau 1.0.5_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-kbproto 1.0.4_0 exists in the ports tree DEBUG: xorg-kbproto 1.0.4_0 is the latest installed DEBUG: xorg-kbproto 1.0.4_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-kbproto. DEBUG: Requested variant i386 is not provided by port xorg-kbproto. DEBUG: Requested variant macosx is not provided by port xorg-kbproto. DEBUG: No need to upgrade! xorg-kbproto 1.0.4_0 >= xorg-kbproto 1.0.4_0 DEBUG: No need to upgrade! xorg-libX11 1.3.3_0 >= xorg-libX11 1.3.3_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-renderproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-renderproto 0.11_0 exists in the ports tree DEBUG: xorg-renderproto 0.11_0 is the latest installed DEBUG: xorg-renderproto 0.11_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-renderproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-renderproto. DEBUG: Requested variant i386 is not provided by port xorg-renderproto. DEBUG: Requested variant macosx is not provided by port xorg-renderproto. DEBUG: No need to upgrade! xorg-renderproto 0.11_0 >= xorg-renderproto 0.11_0 DEBUG: No need to upgrade! xrender 0.9.5_0 >= xrender 0.9.5_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig DEBUG: epoch: in tree: 0 installed: 0 DEBUG: fontconfig 2.8.0_0 exists in the ports tree DEBUG: fontconfig 2.8.0_0 +macosx is the latest installed DEBUG: fontconfig 2.8.0_0 +macosx is active DEBUG: Merging existing variants macosx into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port fontconfig. DEBUG: Requested variant i386 is not provided by port fontconfig. DEBUG: Executing variant macosx provides macosx DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype DEBUG: epoch: in tree: 0 installed: 0 DEBUG: freetype 2.3.12_0 exists in the ports tree DEBUG: freetype 2.3.12_0 +macosx is the latest installed DEBUG: freetype 2.3.12_0 +macosx is active DEBUG: Merging existing variants macosx into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port freetype. DEBUG: Requested variant i386 is not provided by port freetype. DEBUG: Executing variant macosx provides macosx DEBUG: No need to upgrade! freetype 2.3.12_0 >= freetype 2.3.12_0 DEBUG: No need to upgrade! fontconfig 2.8.0_0 >= fontconfig 2.8.0_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libpng 1.2.43_0 exists in the ports tree DEBUG: libpng 1.2.43_0 is the latest installed DEBUG: libpng 1.2.43_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port libpng. DEBUG: Requested variant i386 is not provided by port libpng. DEBUG: Requested variant macosx is not provided by port libpng. DEBUG: No need to upgrade! libpng 1.2.43_0 >= libpng 1.2.43_0 DEBUG: No need to upgrade! cairo 1.8.10_0 >= cairo 1.8.10_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg DEBUG: epoch: in tree: 0 installed: 0 DEBUG: jpeg 8a_0 exists in the ports tree DEBUG: jpeg 8a_0 is the latest installed DEBUG: jpeg 8a_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port jpeg. DEBUG: Requested variant i386 is not provided by port jpeg. DEBUG: Requested variant macosx is not provided by port jpeg. DEBUG: No need to upgrade! jpeg 8a_0 >= jpeg 8a_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff DEBUG: epoch: in tree: 0 installed: 0 DEBUG: tiff 3.9.2_3 exists in the ports tree DEBUG: tiff 3.9.2_3 +macosx is the latest installed DEBUG: tiff 3.9.2_3 +macosx is active DEBUG: Merging existing variants macosx into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port tiff. DEBUG: Requested variant i386 is not provided by port tiff. DEBUG: Executing variant macosx provides macosx DEBUG: No need to upgrade! tiff 3.9.2_3 >= tiff 3.9.2_3 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jasper DEBUG: epoch: in tree: 0 installed: 0 DEBUG: jasper 1.900.1_7 exists in the ports tree DEBUG: jasper 1.900.1_7 is the latest installed DEBUG: jasper 1.900.1_7 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jasper DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port jasper. DEBUG: Requested variant i386 is not provided by port jasper. DEBUG: Requested variant macosx is not provided by port jasper. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/unzip DEBUG: unzip is *not* installed by MacPorts DEBUG: Searching for dependency: unzip DEBUG: Didn't find receipt, going to depspec regex for: unzip DEBUG: Found Dependency: path: /usr/bin filename: unzip regex: ^unzip$ DEBUG: unzip not installed, soft dependency satisfied DEBUG: No need to upgrade! jasper 1.900.1_7 >= jasper 1.900.1_7 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/atk DEBUG: epoch: in tree: 0 installed: 0 DEBUG: atk 1.28.0_0 exists in the ports tree DEBUG: atk 1.28.0_0 is the latest installed DEBUG: atk 1.28.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/atk DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port atk. DEBUG: Requested variant i386 is not provided by port atk. DEBUG: Requested variant macosx is not provided by port atk. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gtk-doc DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gtk-doc 1.14_0 exists in the ports tree DEBUG: gtk-doc 1.14_0 is the latest installed DEBUG: gtk-doc 1.14_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gtk-doc DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port gtk-doc. DEBUG: Requested variant i386 is not provided by port gtk-doc. DEBUG: Requested variant macosx is not provided by port gtk-doc. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/rarian DEBUG: epoch: in tree: 0 installed: 0 DEBUG: rarian 0.8.1_0 exists in the ports tree DEBUG: rarian 0.8.1_0 is the latest installed DEBUG: rarian 0.8.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/rarian DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port rarian. DEBUG: Requested variant i386 is not provided by port rarian. DEBUG: Requested variant macosx is not provided by port rarian. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/getopt DEBUG: epoch: in tree: 0 installed: 0 DEBUG: getopt 1.1.4_1 exists in the ports tree DEBUG: getopt 1.1.4_1 is the latest installed DEBUG: getopt 1.1.4_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/getopt DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port getopt. DEBUG: Requested variant i386 is not provided by port getopt. DEBUG: Requested variant macosx is not provided by port getopt. DEBUG: No need to upgrade! getopt 1.1.4_1 >= getopt 1.1.4_1 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxslt DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libxslt 1.1.26_0 exists in the ports tree DEBUG: libxslt 1.1.26_0 is the latest installed DEBUG: libxslt 1.1.26_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxslt DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port libxslt. DEBUG: Requested variant i386 is not provided by port libxslt. DEBUG: Requested variant macosx is not provided by port libxslt. DEBUG: No need to upgrade! libxslt 1.1.26_0 >= libxslt 1.1.26_0 DEBUG: No need to upgrade! rarian 0.8.1_0 >= rarian 0.8.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gnome-doc-utils DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gnome-doc-utils 0.18.1_1 exists in the ports tree DEBUG: gnome-doc-utils 0.18.1_1 is the latest installed DEBUG: gnome-doc-utils 0.18.1_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gnome-doc-utils DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port gnome-doc-utils. DEBUG: Requested variant i386 is not provided by port gnome-doc-utils. DEBUG: Requested variant macosx is not provided by port gnome-doc-utils. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python26 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: python26 2.6.5_0 exists in the ports tree DEBUG: python26 2.6.5_0 +darwin is the latest installed DEBUG: python26 2.6.5_0 +darwin is active DEBUG: Merging existing variants darwin into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python26 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant i386 is not provided by port python26. DEBUG: Requested variant macosx is not provided by port python26. DEBUG: Executing variant darwin provides darwin DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl DEBUG: epoch: in tree: 1 installed: 1 DEBUG: openssl 0.9.8n_0 exists in the ports tree DEBUG: openssl 0.9.8n_0 +darwin is the latest installed DEBUG: openssl 0.9.8n_0 +darwin is active DEBUG: Merging existing variants darwin into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant i386 is not provided by port openssl. DEBUG: Requested variant macosx is not provided by port openssl. DEBUG: Executing variant darwin provides darwin DEBUG: No need to upgrade! openssl 0.9.8n_0 >= openssl 0.9.8n_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/tk DEBUG: epoch: in tree: 0 installed: 0 DEBUG: tk 8.5.8_0 exists in the ports tree DEBUG: tk 8.5.8_0 +darwin is the latest installed DEBUG: tk 8.5.8_0 +darwin is active DEBUG: Merging existing variants darwin into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/tk DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: adding the default universal variant DEBUG: Requested variant i386 is not provided by port tk. DEBUG: Requested variant macosx is not provided by port tk. DEBUG: Executing variant darwin provides darwin DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/tcl DEBUG: epoch: in tree: 0 installed: 0 DEBUG: tcl 8.5.8_0 exists in the ports tree DEBUG: tcl 8.5.8_0 +darwin is the latest installed DEBUG: tcl 8.5.8_0 +darwin is active DEBUG: Merging existing variants darwin into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/tcl DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: adding the default universal variant DEBUG: Requested variant i386 is not provided by port tcl. DEBUG: Requested variant macosx is not provided by port tcl. DEBUG: Executing variant darwin provides darwin DEBUG: No need to upgrade! tcl 8.5.8_0 >= tcl 8.5.8_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: Xft2 2.1.14_0 exists in the ports tree DEBUG: Xft2 2.1.14_0 is the latest installed DEBUG: Xft2 2.1.14_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port Xft2. DEBUG: Requested variant i386 is not provided by port Xft2. DEBUG: Requested variant macosx is not provided by port Xft2. DEBUG: No need to upgrade! Xft2 2.1.14_0 >= Xft2 2.1.14_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXScrnSaver DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXScrnSaver 1.2.0_0 exists in the ports tree DEBUG: xorg-libXScrnSaver 1.2.0_0 is the latest installed DEBUG: xorg-libXScrnSaver 1.2.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXScrnSaver DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXScrnSaver. DEBUG: Requested variant i386 is not provided by port xorg-libXScrnSaver. DEBUG: Requested variant macosx is not provided by port xorg-libXScrnSaver. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXext DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXext 1.1.1_0 exists in the ports tree DEBUG: xorg-libXext 1.1.1_0 is the latest installed DEBUG: xorg-libXext 1.1.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXext DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXext. DEBUG: Requested variant i386 is not provided by port xorg-libXext. DEBUG: Requested variant macosx is not provided by port xorg-libXext. DEBUG: No need to upgrade! xorg-libXext 1.1.1_0 >= xorg-libXext 1.1.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-scrnsaverproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-scrnsaverproto 1.2.0_0 exists in the ports tree DEBUG: xorg-scrnsaverproto 1.2.0_0 is the latest installed DEBUG: xorg-scrnsaverproto 1.2.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-scrnsaverproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-scrnsaverproto. DEBUG: Requested variant i386 is not provided by port xorg-scrnsaverproto. DEBUG: Requested variant macosx is not provided by port xorg-scrnsaverproto. DEBUG: No need to upgrade! xorg-scrnsaverproto 1.2.0_0 >= xorg-scrnsaverproto 1.2.0_0 DEBUG: No need to upgrade! xorg-libXScrnSaver 1.2.0_0 >= xorg-libXScrnSaver 1.2.0_0 DEBUG: No need to upgrade! tk 8.5.8_0 >= tk 8.5.8_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: sqlite3 3.6.23.1_0 exists in the ports tree DEBUG: sqlite3 3.6.23.1_0 is the latest installed DEBUG: sqlite3 3.6.23.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: adding the default universal variant DEBUG: Requested variant darwin is not provided by port sqlite3. DEBUG: Requested variant i386 is not provided by port sqlite3. DEBUG: Requested variant macosx is not provided by port sqlite3. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline DEBUG: epoch: in tree: 0 installed: 0 DEBUG: readline 6.1.000_1 exists in the ports tree DEBUG: readline 6.1.000_1 +darwin is the latest installed DEBUG: readline 6.1.000_1 +darwin is active DEBUG: Merging existing variants darwin into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant i386 is not provided by port readline. DEBUG: Requested variant macosx is not provided by port readline. DEBUG: Executing variant darwin provides darwin DEBUG: No need to upgrade! readline 6.1.000_1 >= readline 6.1.000_1 DEBUG: No need to upgrade! sqlite3 3.6.23.1_0 >= sqlite3 3.6.23.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: db46 4.6.21_6 exists in the ports tree DEBUG: db46 4.6.21_6 is the latest installed DEBUG: db46 4.6.21_6 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port db46. DEBUG: Requested variant i386 is not provided by port db46. DEBUG: Requested variant macosx is not provided by port db46. DEBUG: No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gdbm 1.8.3_2 exists in the ports tree DEBUG: gdbm 1.8.3_2 is the latest installed DEBUG: gdbm 1.8.3_2 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port gdbm. DEBUG: Requested variant i386 is not provided by port gdbm. DEBUG: Requested variant macosx is not provided by port gdbm. DEBUG: No need to upgrade! gdbm 1.8.3_2 >= gdbm 1.8.3_2 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: bzip2 1.0.5_3 exists in the ports tree DEBUG: bzip2 1.0.5_3 +darwin is the latest installed DEBUG: bzip2 1.0.5_3 +darwin is active DEBUG: Merging existing variants darwin into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant i386 is not provided by port bzip2. DEBUG: Requested variant macosx is not provided by port bzip2. DEBUG: Executing variant darwin provides darwin DEBUG: No need to upgrade! bzip2 1.0.5_3 >= bzip2 1.0.5_3 DEBUG: No need to upgrade! python26 2.6.5_0 >= python26 2.6.5_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml DEBUG: epoch: in tree: 0 installed: 0 DEBUG: docbook-xml 5.0_0 exists in the ports tree DEBUG: docbook-xml 5.0_0 is the latest installed DEBUG: docbook-xml 5.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: not using configure, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port docbook-xml. DEBUG: Requested variant i386 is not provided by port docbook-xml. DEBUG: Requested variant macosx is not provided by port docbook-xml. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.1.2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: docbook-xml-4.1.2 4.1.2_1 exists in the ports tree DEBUG: docbook-xml-4.1.2 4.1.2_1 is the latest installed DEBUG: docbook-xml-4.1.2 4.1.2_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.1.2 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: not using configure, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port docbook-xml-4.1.2. DEBUG: Requested variant i386 is not provided by port docbook-xml-4.1.2. DEBUG: Requested variant macosx is not provided by port docbook-xml-4.1.2. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/xmlcatmgr DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xmlcatmgr 2.2_1 exists in the ports tree DEBUG: xmlcatmgr 2.2_1 is the latest installed DEBUG: xmlcatmgr 2.2_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/xmlcatmgr DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xmlcatmgr. DEBUG: Requested variant i386 is not provided by port xmlcatmgr. DEBUG: Requested variant macosx is not provided by port xmlcatmgr. DEBUG: No need to upgrade! xmlcatmgr 2.2_1 >= xmlcatmgr 2.2_1 DEBUG: No need to upgrade! docbook-xml-4.1.2 4.1.2_1 >= docbook-xml-4.1.2 4.1.2_1 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: docbook-xml-4.2 4.2_0 exists in the ports tree DEBUG: docbook-xml-4.2 4.2_0 is the latest installed DEBUG: docbook-xml-4.2 4.2_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.2 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: not using configure, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port docbook-xml-4.2. DEBUG: Requested variant i386 is not provided by port docbook-xml-4.2. DEBUG: Requested variant macosx is not provided by port docbook-xml-4.2. DEBUG: No need to upgrade! docbook-xml-4.2 4.2_0 >= docbook-xml-4.2 4.2_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.3 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: docbook-xml-4.3 4.3_0 exists in the ports tree DEBUG: docbook-xml-4.3 4.3_0 is the latest installed DEBUG: docbook-xml-4.3 4.3_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.3 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: not using configure, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port docbook-xml-4.3. DEBUG: Requested variant i386 is not provided by port docbook-xml-4.3. DEBUG: Requested variant macosx is not provided by port docbook-xml-4.3. DEBUG: No need to upgrade! docbook-xml-4.3 4.3_0 >= docbook-xml-4.3 4.3_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.4 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: docbook-xml-4.4 4.4_0 exists in the ports tree DEBUG: docbook-xml-4.4 4.4_0 is the latest installed DEBUG: docbook-xml-4.4 4.4_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.4 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: not using configure, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port docbook-xml-4.4. DEBUG: Requested variant i386 is not provided by port docbook-xml-4.4. DEBUG: Requested variant macosx is not provided by port docbook-xml-4.4. DEBUG: No need to upgrade! docbook-xml-4.4 4.4_0 >= docbook-xml-4.4 4.4_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.5 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: docbook-xml-4.5 4.5_0 exists in the ports tree DEBUG: docbook-xml-4.5 4.5_0 is the latest installed DEBUG: docbook-xml-4.5 4.5_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.5 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: not using configure, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port docbook-xml-4.5. DEBUG: Requested variant i386 is not provided by port docbook-xml-4.5. DEBUG: Requested variant macosx is not provided by port docbook-xml-4.5. DEBUG: No need to upgrade! docbook-xml-4.5 4.5_0 >= docbook-xml-4.5 4.5_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-5.0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: docbook-xml-5.0 5.0_0 exists in the ports tree DEBUG: docbook-xml-5.0 5.0_0 is the latest installed DEBUG: docbook-xml-5.0 5.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-5.0 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: not using configure, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port docbook-xml-5.0. DEBUG: Requested variant i386 is not provided by port docbook-xml-5.0. DEBUG: Requested variant macosx is not provided by port docbook-xml-5.0. DEBUG: No need to upgrade! docbook-xml-5.0 5.0_0 >= docbook-xml-5.0 5.0_0 DEBUG: No need to upgrade! docbook-xml 5.0_0 >= docbook-xml 5.0_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xsl DEBUG: epoch: in tree: 0 installed: 0 DEBUG: docbook-xsl 1.75.2_0 exists in the ports tree DEBUG: docbook-xsl 1.75.2_0 is the latest installed DEBUG: docbook-xsl 1.75.2_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xsl DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: not using configure, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port docbook-xsl. DEBUG: Requested variant i386 is not provided by port docbook-xsl. DEBUG: Requested variant macosx is not provided by port docbook-xsl. DEBUG: No need to upgrade! docbook-xsl 1.75.2_0 >= docbook-xsl 1.75.2_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/iso-codes DEBUG: epoch: in tree: 0 installed: 0 DEBUG: iso-codes 3.16_0 exists in the ports tree DEBUG: iso-codes 3.16_0 is the latest installed DEBUG: iso-codes 3.16_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/iso-codes DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port iso-codes. DEBUG: Requested variant i386 is not provided by port iso-codes. DEBUG: Requested variant macosx is not provided by port iso-codes. DEBUG: No need to upgrade! iso-codes 3.16_0 >= iso-codes 3.16_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-libxml2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: py26-libxml2 2.6.21_0 exists in the ports tree DEBUG: py26-libxml2 2.6.21_0 is the latest installed DEBUG: py26-libxml2 2.6.21_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-libxml2 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl DEBUG: not using configure, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port py26-libxml2. DEBUG: Requested variant i386 is not provided by port py26-libxml2. DEBUG: Requested variant macosx is not provided by port py26-libxml2. DEBUG: No need to upgrade! py26-libxml2 2.6.21_0 >= py26-libxml2 2.6.21_0 DEBUG: No need to upgrade! gnome-doc-utils 0.18.1_1 >= gnome-doc-utils 0.18.1_1 DEBUG: No need to upgrade! gtk-doc 1.14_0 >= gtk-doc 1.14_0 DEBUG: No need to upgrade! atk 1.28.0_0 >= atk 1.28.0_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/pango DEBUG: epoch: in tree: 1 installed: 1 DEBUG: pango 1.24.5_0 exists in the ports tree DEBUG: pango 1.24.5_0 +macosx is the latest installed DEBUG: pango 1.24.5_0 +macosx is active DEBUG: Merging existing variants macosx into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/pango DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port pango. DEBUG: Requested variant i386 is not provided by port pango. DEBUG: Executing variant macosx provides macosx DEBUG: No need to upgrade! pango 1.24.5_0 >= pango 1.24.5_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXi DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXi 1.3_0 exists in the ports tree DEBUG: xorg-libXi 1.3_0 is the latest installed DEBUG: xorg-libXi 1.3_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXi DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXi. DEBUG: Requested variant i386 is not provided by port xorg-libXi. DEBUG: Requested variant macosx is not provided by port xorg-libXi. DEBUG: No need to upgrade! xorg-libXi 1.3_0 >= xorg-libXi 1.3_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXrandr DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXrandr 1.3.0_1 exists in the ports tree DEBUG: xorg-libXrandr 1.3.0_1 is the latest installed DEBUG: xorg-libXrandr 1.3.0_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXrandr DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXrandr. DEBUG: Requested variant i386 is not provided by port xorg-libXrandr. DEBUG: Requested variant macosx is not provided by port xorg-libXrandr. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-randrproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-randrproto 1.3.1_0 exists in the ports tree DEBUG: xorg-randrproto 1.3.1_0 is the latest installed DEBUG: xorg-randrproto 1.3.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-randrproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-randrproto. DEBUG: Requested variant i386 is not provided by port xorg-randrproto. DEBUG: Requested variant macosx is not provided by port xorg-randrproto. DEBUG: No need to upgrade! xorg-randrproto 1.3.1_0 >= xorg-randrproto 1.3.1_0 DEBUG: No need to upgrade! xorg-libXrandr 1.3.0_1 >= xorg-libXrandr 1.3.0_1 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXcursor DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXcursor 1.1.10_0 exists in the ports tree DEBUG: xorg-libXcursor 1.1.10_0 is the latest installed DEBUG: xorg-libXcursor 1.1.10_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXcursor DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXcursor. DEBUG: Requested variant i386 is not provided by port xorg-libXcursor. DEBUG: Requested variant macosx is not provided by port xorg-libXcursor. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-fixesproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-fixesproto 4.1.1_0 exists in the ports tree DEBUG: xorg-fixesproto 4.1.1_0 is the latest installed DEBUG: xorg-fixesproto 4.1.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-fixesproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-fixesproto. DEBUG: Requested variant i386 is not provided by port xorg-fixesproto. DEBUG: Requested variant macosx is not provided by port xorg-fixesproto. DEBUG: No need to upgrade! xorg-fixesproto 4.1.1_0 >= xorg-fixesproto 4.1.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXfixes DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXfixes 4.0.4_0 exists in the ports tree DEBUG: xorg-libXfixes 4.0.4_0 is the latest installed DEBUG: xorg-libXfixes 4.0.4_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXfixes DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXfixes. DEBUG: Requested variant i386 is not provided by port xorg-libXfixes. DEBUG: Requested variant macosx is not provided by port xorg-libXfixes. DEBUG: No need to upgrade! xorg-libXfixes 4.0.4_0 >= xorg-libXfixes 4.0.4_0 DEBUG: No need to upgrade! xorg-libXcursor 1.1.10_0 >= xorg-libXcursor 1.1.10_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXinerama DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXinerama 1.1_0 exists in the ports tree DEBUG: xorg-libXinerama 1.1_0 is the latest installed DEBUG: xorg-libXinerama 1.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXinerama DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXinerama. DEBUG: Requested variant i386 is not provided by port xorg-libXinerama. DEBUG: Requested variant macosx is not provided by port xorg-libXinerama. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xineramaproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-xineramaproto 1.2_0 exists in the ports tree DEBUG: xorg-xineramaproto 1.2_0 is the latest installed DEBUG: xorg-xineramaproto 1.2_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xineramaproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-xineramaproto. DEBUG: Requested variant i386 is not provided by port xorg-xineramaproto. DEBUG: Requested variant macosx is not provided by port xorg-xineramaproto. DEBUG: No need to upgrade! xorg-xineramaproto 1.2_0 >= xorg-xineramaproto 1.2_0 DEBUG: No need to upgrade! xorg-libXinerama 1.1_0 >= xorg-libXinerama 1.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdamage DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXdamage 1.1.2_0 exists in the ports tree DEBUG: xorg-libXdamage 1.1.2_0 is the latest installed DEBUG: xorg-libXdamage 1.1.2_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdamage DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXdamage. DEBUG: Requested variant i386 is not provided by port xorg-libXdamage. DEBUG: Requested variant macosx is not provided by port xorg-libXdamage. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-damageproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-damageproto 1.2.0_0 exists in the ports tree DEBUG: xorg-damageproto 1.2.0_0 is the latest installed DEBUG: xorg-damageproto 1.2.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-damageproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-damageproto. DEBUG: Requested variant i386 is not provided by port xorg-damageproto. DEBUG: Requested variant macosx is not provided by port xorg-damageproto. DEBUG: No need to upgrade! xorg-damageproto 1.2.0_0 >= xorg-damageproto 1.2.0_0 DEBUG: No need to upgrade! xorg-libXdamage 1.1.2_0 >= xorg-libXdamage 1.1.2_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXcomposite DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXcomposite 0.4.1_0 exists in the ports tree DEBUG: xorg-libXcomposite 0.4.1_0 is the latest installed DEBUG: xorg-libXcomposite 0.4.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXcomposite DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXcomposite. DEBUG: Requested variant i386 is not provided by port xorg-libXcomposite. DEBUG: Requested variant macosx is not provided by port xorg-libXcomposite. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-compositeproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-compositeproto 0.4.1_0 exists in the ports tree DEBUG: xorg-compositeproto 0.4.1_0 is the latest installed DEBUG: xorg-compositeproto 0.4.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-compositeproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-compositeproto. DEBUG: Requested variant i386 is not provided by port xorg-compositeproto. DEBUG: Requested variant macosx is not provided by port xorg-compositeproto. DEBUG: No need to upgrade! xorg-compositeproto 0.4.1_0 >= xorg-compositeproto 0.4.1_0 DEBUG: No need to upgrade! xorg-libXcomposite 0.4.1_0 >= xorg-libXcomposite 0.4.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/shared-mime-info DEBUG: epoch: in tree: 0 installed: 0 DEBUG: shared-mime-info 0.71_0 exists in the ports tree DEBUG: shared-mime-info 0.71_0 is the latest installed DEBUG: shared-mime-info 0.71_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/shared-mime-info DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port shared-mime-info. DEBUG: Requested variant i386 is not provided by port shared-mime-info. DEBUG: Requested variant macosx is not provided by port shared-mime-info. DEBUG: No need to upgrade! shared-mime-info 0.71_0 >= shared-mime-info 0.71_0 DEBUG: No need to upgrade! gtk2 2.18.8_0 >= gtk2 2.18.8_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/dbus-glib DEBUG: epoch: in tree: 0 installed: 0 DEBUG: dbus-glib 0.86_0 exists in the ports tree DEBUG: dbus-glib 0.86_0 is the latest installed DEBUG: dbus-glib 0.86_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/dbus-glib DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port dbus-glib. DEBUG: Requested variant i386 is not provided by port dbus-glib. DEBUG: Requested variant macosx is not provided by port dbus-glib. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/dbus DEBUG: epoch: in tree: 0 installed: 0 DEBUG: dbus 1.2.16_1 exists in the ports tree DEBUG: dbus 1.2.16_1 is the latest installed DEBUG: dbus 1.2.16_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/dbus DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port dbus. DEBUG: Requested variant i386 is not provided by port dbus. DEBUG: Requested variant macosx is not provided by port dbus. DEBUG: No need to upgrade! dbus 1.2.16_1 >= dbus 1.2.16_1 DEBUG: No need to upgrade! dbus-glib 0.86_0 >= dbus-glib 0.86_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/security/policykit DEBUG: epoch: in tree: 0 installed: 0 DEBUG: policykit 0.9_0 exists in the ports tree DEBUG: policykit 0.9_0 is the latest installed DEBUG: policykit 0.9_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/security/policykit DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port policykit. DEBUG: Requested variant i386 is not provided by port policykit. DEBUG: Requested variant macosx is not provided by port policykit. DEBUG: No need to upgrade! policykit 0.9_0 >= policykit 0.9_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/orbit2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: orbit2 2.14.18_0 exists in the ports tree DEBUG: orbit2 2.14.18_0 is the latest installed DEBUG: orbit2 2.14.18_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/orbit2 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port orbit2. DEBUG: Requested variant i386 is not provided by port orbit2. DEBUG: Requested variant macosx is not provided by port orbit2. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libidl DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libidl 0.8.14_0 exists in the ports tree DEBUG: libidl 0.8.14_0 is the latest installed DEBUG: libidl 0.8.14_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libidl DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port libidl. DEBUG: Requested variant i386 is not provided by port libidl. DEBUG: Requested variant macosx is not provided by port libidl. DEBUG: No need to upgrade! libidl 0.8.14_0 >= libidl 0.8.14_0 DEBUG: No need to upgrade! orbit2 2.14.18_0 >= orbit2 2.14.18_0 DEBUG: No need to upgrade! gconf 2.26.2_0 >= gconf 2.26.2_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/desktop-file-utils DEBUG: epoch: in tree: 0 installed: 0 DEBUG: desktop-file-utils 0.15_1 exists in the ports tree DEBUG: desktop-file-utils 0.15_1 is the latest installed DEBUG: desktop-file-utils 0.15_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/desktop-file-utils DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port desktop-file-utils. DEBUG: Requested variant i386 is not provided by port desktop-file-utils. DEBUG: Requested variant macosx is not provided by port desktop-file-utils. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/popt DEBUG: epoch: in tree: 0 installed: 0 DEBUG: popt 1.15_0 exists in the ports tree DEBUG: popt 1.15_0 is the latest installed DEBUG: popt 1.15_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/popt DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port popt. DEBUG: Requested variant i386 is not provided by port popt. DEBUG: Requested variant macosx is not provided by port popt. DEBUG: No need to upgrade! popt 1.15_0 >= popt 1.15_0 DEBUG: No need to upgrade! desktop-file-utils 0.15_1 >= desktop-file-utils 0.15_1 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gnome-mime-data DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gnome-mime-data 2.18.0_3 exists in the ports tree DEBUG: gnome-mime-data 2.18.0_3 is the latest installed DEBUG: gnome-mime-data 2.18.0_3 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gnome-mime-data DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port gnome-mime-data. DEBUG: Requested variant i386 is not provided by port gnome-mime-data. DEBUG: Requested variant macosx is not provided by port gnome-mime-data. DEBUG: No need to upgrade! gnome-mime-data 2.18.0_3 >= gnome-mime-data 2.18.0_3 DEBUG: No need to upgrade! gnome-vfs 2.24.3_0 >= gnome-vfs 2.24.3_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/liboil DEBUG: epoch: in tree: 0 installed: 0 DEBUG: liboil 0.3.17_0 exists in the ports tree DEBUG: liboil 0.3.17_0 +darwin_10 is the latest installed DEBUG: liboil 0.3.17_0 +darwin_10 is active DEBUG: Merging existing variants darwin_10 into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/liboil DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port liboil. DEBUG: Requested variant i386 is not provided by port liboil. DEBUG: Requested variant macosx is not provided by port liboil. DEBUG: Executing variant darwin_10 provides darwin_10 DEBUG: No need to upgrade! liboil 0.3.17_0 >= liboil 0.3.17_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/libogg DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libogg 1.2.0_0 exists in the ports tree DEBUG: libogg 1.2.0_0 is the latest installed DEBUG: libogg 1.2.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/libogg DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port libogg. DEBUG: Requested variant i386 is not provided by port libogg. DEBUG: Requested variant macosx is not provided by port libogg. DEBUG: No need to upgrade! libogg 1.2.0_0 >= libogg 1.2.0_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/libtheora DEBUG: epoch: in tree: 1 installed: 1 DEBUG: libtheora 1.1.1_0 exists in the ports tree DEBUG: libtheora 1.1.1_0 is the latest installed DEBUG: libtheora 1.1.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/libtheora DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: adding the default universal variant DEBUG: Requested variant darwin is not provided by port libtheora. DEBUG: Requested variant i386 is not provided by port libtheora. DEBUG: Requested variant macosx is not provided by port libtheora. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/libvorbis DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libvorbis 1.3.1_0 exists in the ports tree DEBUG: libvorbis 1.3.1_0 is the latest installed DEBUG: libvorbis 1.3.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/libvorbis DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port libvorbis. DEBUG: Requested variant i386 is not provided by port libvorbis. DEBUG: Requested variant macosx is not provided by port libvorbis. DEBUG: No need to upgrade! libvorbis 1.3.1_0 >= libvorbis 1.3.1_0 DEBUG: No need to upgrade! libtheora 1.1.1_0 >= libtheora 1.1.1_0 DEBUG: No need to upgrade! gst-plugins-base 0.10.29_0 >= gst-plugins-base 0.10.29_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/aalib DEBUG: epoch: in tree: 0 installed: 0 DEBUG: aalib 1.4rc5_4 exists in the ports tree DEBUG: aalib 1.4rc5_4 is the latest installed DEBUG: aalib 1.4rc5_4 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/aalib DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: adding the default universal variant DEBUG: Requested variant darwin is not provided by port aalib. DEBUG: Requested variant i386 is not provided by port aalib. DEBUG: Requested variant macosx is not provided by port aalib. DEBUG: No need to upgrade! aalib 1.4rc5_4 >= aalib 1.4rc5_4 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/esound DEBUG: epoch: in tree: 0 installed: 0 DEBUG: esound 0.2.41_1 exists in the ports tree DEBUG: esound 0.2.41_1 is the latest installed DEBUG: esound 0.2.41_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/esound DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: adding the default universal variant DEBUG: Requested variant darwin is not provided by port esound. DEBUG: Requested variant i386 is not provided by port esound. DEBUG: Requested variant macosx is not provided by port esound. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/audiofile DEBUG: epoch: in tree: 0 installed: 0 DEBUG: audiofile 0.2.7_0 exists in the ports tree DEBUG: audiofile 0.2.7_0 is the latest installed DEBUG: audiofile 0.2.7_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/audiofile DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port audiofile. DEBUG: Requested variant i386 is not provided by port audiofile. DEBUG: Requested variant macosx is not provided by port audiofile. DEBUG: No need to upgrade! audiofile 0.2.7_0 >= audiofile 0.2.7_0 DEBUG: No need to upgrade! esound 0.2.41_1 >= esound 0.2.41_1 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/flac DEBUG: epoch: in tree: 0 installed: 0 DEBUG: flac 1.2.1_0 exists in the ports tree DEBUG: flac 1.2.1_0 +darwin_i386 is the latest installed DEBUG: flac 1.2.1_0 +darwin_i386 is active DEBUG: Merging existing variants darwin_i386 into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/flac DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: adding the default universal variant DEBUG: Requested variant darwin is not provided by port flac. DEBUG: Requested variant i386 is not provided by port flac. DEBUG: Requested variant macosx is not provided by port flac. DEBUG: Executing variant darwin_i386 provides darwin_i386 DEBUG: No need to upgrade! flac 1.2.1_0 >= flac 1.2.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gnome-keyring DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gnome-keyring 2.26.3_0 exists in the ports tree DEBUG: gnome-keyring 2.26.3_0 is the latest installed DEBUG: gnome-keyring 2.26.3_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gnome-keyring DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port gnome-keyring. DEBUG: Requested variant i386 is not provided by port gnome-keyring. DEBUG: Requested variant macosx is not provided by port gnome-keyring. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libgcrypt DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libgcrypt 1.4.4_0 exists in the ports tree DEBUG: libgcrypt 1.4.4_0 is the latest installed DEBUG: libgcrypt 1.4.4_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libgcrypt DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port libgcrypt. DEBUG: Requested variant i386 is not provided by port libgcrypt. DEBUG: Requested variant macosx is not provided by port libgcrypt. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libgpg-error DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libgpg-error 1.7_0 exists in the ports tree DEBUG: libgpg-error 1.7_0 is the latest installed DEBUG: libgpg-error 1.7_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libgpg-error DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port libgpg-error. DEBUG: Requested variant i386 is not provided by port libgpg-error. DEBUG: Requested variant macosx is not provided by port libgpg-error. DEBUG: No need to upgrade! libgpg-error 1.7_0 >= libgpg-error 1.7_0 DEBUG: No need to upgrade! libgcrypt 1.4.4_0 >= libgcrypt 1.4.4_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtasn1 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libtasn1 2.2_0 exists in the ports tree DEBUG: libtasn1 2.2_0 is the latest installed DEBUG: libtasn1 2.2_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtasn1 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port libtasn1. DEBUG: Requested variant i386 is not provided by port libtasn1. DEBUG: Requested variant macosx is not provided by port libtasn1. DEBUG: No need to upgrade! libtasn1 2.2_0 >= libtasn1 2.2_0 DEBUG: No need to upgrade! gnome-keyring 2.26.3_0 >= gnome-keyring 2.26.3_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libcaca DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libcaca 0.9_1 exists in the ports tree DEBUG: libcaca 0.9_1 is the latest installed DEBUG: libcaca 0.9_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libcaca DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port libcaca. DEBUG: Requested variant i386 is not provided by port libcaca. DEBUG: Requested variant macosx is not provided by port libcaca. DEBUG: No need to upgrade! libcaca 0.9_1 >= libcaca 0.9_1 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libcdio DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libcdio 0.82_0 exists in the ports tree DEBUG: libcdio 0.82_0 is the latest installed DEBUG: libcdio 0.82_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libcdio DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port libcdio. DEBUG: Requested variant i386 is not provided by port libcdio. DEBUG: Requested variant macosx is not provided by port libcdio. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libcddb DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libcddb 1.3.2_1 exists in the ports tree DEBUG: libcddb 1.3.2_1 is the latest installed DEBUG: libcddb 1.3.2_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libcddb DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port libcddb. DEBUG: Requested variant i386 is not provided by port libcddb. DEBUG: Requested variant macosx is not provided by port libcddb. DEBUG: No need to upgrade! libcddb 1.3.2_1 >= libcddb 1.3.2_1 DEBUG: No need to upgrade! libcdio 0.82_0 >= libcdio 0.82_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/libdv DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libdv 1.0.0_0 exists in the ports tree DEBUG: libdv 1.0.0_0 +darwin_i386 is the latest installed DEBUG: libdv 1.0.0_0 +darwin_i386 is active DEBUG: Merging existing variants darwin_i386 into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/libdv DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: adding the default universal variant DEBUG: Requested variant darwin is not provided by port libdv. DEBUG: Requested variant i386 is not provided by port libdv. DEBUG: Requested variant macosx is not provided by port libdv. DEBUG: Executing variant darwin_i386 provides darwin_i386 DEBUG: No need to upgrade! libdv 1.0.0_0 >= libdv 1.0.0_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/libshout2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libshout2 2.2.2_1 exists in the ports tree DEBUG: libshout2 2.2.2_1 is the latest installed DEBUG: libshout2 2.2.2_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/libshout2 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port libshout2. DEBUG: Requested variant i386 is not provided by port libshout2. DEBUG: Requested variant macosx is not provided by port libshout2. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/speex DEBUG: epoch: in tree: 0 installed: 0 DEBUG: speex 1.0.5_1 exists in the ports tree DEBUG: speex 1.0.5_1 is the latest installed DEBUG: speex 1.0.5_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/speex DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port speex. DEBUG: Requested variant i386 is not provided by port speex. DEBUG: Requested variant macosx is not provided by port speex. DEBUG: No need to upgrade! speex 1.0.5_1 >= speex 1.0.5_1 DEBUG: No need to upgrade! libshout2 2.2.2_1 >= libshout2 2.2.2_1 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/libsoup DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libsoup 2.28.2_1 exists in the ports tree DEBUG: libsoup 2.28.2_1 is the latest installed DEBUG: libsoup 2.28.2_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/libsoup DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port libsoup. DEBUG: Requested variant i386 is not provided by port libsoup. DEBUG: Requested variant macosx is not provided by port libsoup. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gnutls DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gnutls 2.8.6_0 exists in the ports tree DEBUG: gnutls 2.8.6_0 is the latest installed DEBUG: gnutls 2.8.6_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gnutls DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: adding the default universal variant DEBUG: Requested variant darwin is not provided by port gnutls. DEBUG: Requested variant i386 is not provided by port gnutls. DEBUG: Requested variant macosx is not provided by port gnutls. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/opencdk DEBUG: epoch: in tree: 0 installed: 0 DEBUG: opencdk 0.6.6_0 exists in the ports tree DEBUG: opencdk 0.6.6_0 is the latest installed DEBUG: opencdk 0.6.6_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/opencdk DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port opencdk. DEBUG: Requested variant i386 is not provided by port opencdk. DEBUG: Requested variant macosx is not provided by port opencdk. DEBUG: No need to upgrade! opencdk 0.6.6_0 >= opencdk 0.6.6_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/lzo DEBUG: epoch: in tree: 0 installed: 0 DEBUG: lzo 1.08_0 exists in the ports tree DEBUG: lzo 1.08_0 is the latest installed DEBUG: lzo 1.08_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/lzo DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port lzo. DEBUG: Requested variant i386 is not provided by port lzo. DEBUG: Requested variant macosx is not provided by port lzo. DEBUG: No need to upgrade! lzo 1.08_0 >= lzo 1.08_0 DEBUG: No need to upgrade! gnutls 2.8.6_0 >= gnutls 2.8.6_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net/libproxy DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libproxy 0.4.0_3 exists in the ports tree DEBUG: libproxy 0.4.0_3 is the latest installed DEBUG: libproxy 0.4.0_3 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/libproxy DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/cmake-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: adding the default universal variant DEBUG: Requested variant darwin is not provided by port libproxy. DEBUG: Requested variant i386 is not provided by port libproxy. DEBUG: Requested variant macosx is not provided by port libproxy. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/cmake DEBUG: epoch: in tree: 0 installed: 0 DEBUG: cmake 2.8.1_2 exists in the ports tree DEBUG: cmake 2.8.1_2 is the latest installed DEBUG: cmake 2.8.1_2 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/cmake DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port cmake. DEBUG: Requested variant i386 is not provided by port cmake. DEBUG: Requested variant macosx is not provided by port cmake. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/mail/libidn DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libidn 1.18_0 exists in the ports tree DEBUG: libidn 1.18_0 is the latest installed DEBUG: libidn 1.18_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/mail/libidn DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port libidn. DEBUG: Requested variant i386 is not provided by port libidn. DEBUG: Requested variant macosx is not provided by port libidn. DEBUG: No need to upgrade! libidn 1.18_0 >= libidn 1.18_0 DEBUG: No need to upgrade! cmake 2.8.1_2 >= cmake 2.8.1_2 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXmu DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXmu 1.0.5_0 exists in the ports tree DEBUG: xorg-libXmu 1.0.5_0 is the latest installed DEBUG: xorg-libXmu 1.0.5_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXmu DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXmu. DEBUG: Requested variant i386 is not provided by port xorg-libXmu. DEBUG: Requested variant macosx is not provided by port xorg-libXmu. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXt DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXt 1.0.8_0 exists in the ports tree DEBUG: xorg-libXt 1.0.8_0 is the latest installed DEBUG: xorg-libXt 1.0.8_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXt DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXt. DEBUG: Requested variant i386 is not provided by port xorg-libXt. DEBUG: Requested variant macosx is not provided by port xorg-libXt. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libsm DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libsm 1.1.1_0 exists in the ports tree DEBUG: xorg-libsm 1.1.1_0 is the latest installed DEBUG: xorg-libsm 1.1.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libsm DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libsm. DEBUG: Requested variant i386 is not provided by port xorg-libsm. DEBUG: Requested variant macosx is not provided by port xorg-libsm. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libice DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libice 1.0.6_0 exists in the ports tree DEBUG: xorg-libice 1.0.6_0 is the latest installed DEBUG: xorg-libice 1.0.6_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libice DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libice. DEBUG: Requested variant i386 is not provided by port xorg-libice. DEBUG: Requested variant macosx is not provided by port xorg-libice. DEBUG: No need to upgrade! xorg-libice 1.0.6_0 >= xorg-libice 1.0.6_0 DEBUG: No need to upgrade! xorg-libsm 1.1.1_0 >= xorg-libsm 1.1.1_0 DEBUG: No need to upgrade! xorg-libXt 1.0.8_0 >= xorg-libXt 1.0.8_0 DEBUG: No need to upgrade! xorg-libXmu 1.0.5_0 >= xorg-libXmu 1.0.5_0 DEBUG: No need to upgrade! libproxy 0.4.0_3 >= libproxy 0.4.0_3 DEBUG: No need to upgrade! libsoup 2.28.2_1 >= libsoup 2.28.2_1 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/taglib DEBUG: epoch: in tree: 0 installed: 0 DEBUG: taglib 1.6.3_0 exists in the ports tree DEBUG: taglib 1.6.3_0 is the latest installed DEBUG: taglib 1.6.3_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/taglib DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/cmake-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: adding the default universal variant DEBUG: Requested variant darwin is not provided by port taglib. DEBUG: Requested variant i386 is not provided by port taglib. DEBUG: Requested variant macosx is not provided by port taglib. DEBUG: No need to upgrade! taglib 1.6.3_0 >= taglib 1.6.3_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/wavpack DEBUG: epoch: in tree: 0 installed: 0 DEBUG: wavpack 4.60.1_0 exists in the ports tree DEBUG: wavpack 4.60.1_0 is the latest installed DEBUG: wavpack 4.60.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/wavpack DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port wavpack. DEBUG: Requested variant i386 is not provided by port wavpack. DEBUG: Requested variant macosx is not provided by port wavpack. DEBUG: No need to upgrade! wavpack 4.60.1_0 >= wavpack 4.60.1_0 ---> Computing dependencies for gst-plugins-good DEBUG: Searching for dependency: gst-plugins-base DEBUG: Found Dependency: receipt exists for gst-plugins-base DEBUG: Searching for dependency: aalib DEBUG: Found Dependency: receipt exists for aalib DEBUG: Searching for dependency: esound DEBUG: Found Dependency: receipt exists for esound DEBUG: Searching for dependency: flac DEBUG: Found Dependency: receipt exists for flac DEBUG: Searching for dependency: gnome-keyring DEBUG: Found Dependency: receipt exists for gnome-keyring DEBUG: Searching for dependency: libcaca DEBUG: Found Dependency: receipt exists for libcaca DEBUG: Searching for dependency: libcdio DEBUG: Found Dependency: receipt exists for libcdio DEBUG: Searching for dependency: libdv DEBUG: Found Dependency: receipt exists for libdv DEBUG: Searching for dependency: libshout2 DEBUG: Found Dependency: receipt exists for libshout2 DEBUG: Searching for dependency: libsoup DEBUG: Found Dependency: receipt exists for libsoup DEBUG: Searching for dependency: speex DEBUG: Found Dependency: receipt exists for speex DEBUG: Searching for dependency: taglib DEBUG: Found Dependency: receipt exists for taglib DEBUG: Searching for dependency: wavpack DEBUG: Found Dependency: receipt exists for wavpack DEBUG: Executing org.macports.main (gst-plugins-good) DEBUG: Skipping completed org.macports.fetch (gst-plugins-good) DEBUG: Skipping completed org.macports.checksum (gst-plugins-good) DEBUG: setting option extract.cmd to /usr/bin/bzip2 DEBUG: Skipping completed org.macports.extract (gst-plugins-good) DEBUG: Skipping completed org.macports.patch (gst-plugins-good) DEBUG: Skipping completed org.macports.configure (gst-plugins-good) ---> Building gst-plugins-good DEBUG: Executing org.macports.build (gst-plugins-good) DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.6' DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_gst-plugins-good/work/gst-plugins-good-0.10.21" && /usr/bin/make -j2 all' Making all in gst Making all in videofilter Making all in alpha Making all in apetag Making all in audiofx Making all in auparse Making all in autodetect Making all in avi Making all in cutter Making all in debugutils Making all in deinterlace Making all in effectv Making all in equalizer Making all in flv Making all in id3demux Making all in icydemux Making all in interleave Making all in flx Making all in goom Making all in goom2k1 Making all in law Making all in level Making all in matroska Making all in multifile Making all in multipart Making all in qtdemux Making all in replaygain Making all in rtp Making all in rtpmanager Making all in rtsp CC gstrtspsrc.o gstrtspsrc.c:179: error: static declaration of 'gst_rtsp_lower_trans_get_type' follows non-static declaration /opt/local/include/gstreamer-0.10/gst/rtsp/gstrtsptransport.h:97: error: previous declaration of 'gst_rtsp_lower_trans_get_type' was here make[3]: *** [libgstrtsp_la-gstrtspsrc.lo] Error 1 make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_gst-plugins-good/work/gst-plugins-good-0.10.21" && /usr/bin/make -j2 all " returned error 2 DEBUG: Backtrace: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_gst-plugins-good/work/gst-plugins-good-0.10.21" && /usr/bin/make -j2 all " returned error 2 while executing "command_exec build" (procedure "portbuild::build_main" line 9) invoked from within "$procedure $targetname" Warning: the following items did not execute (for gst-plugins-good): org.macports.activate org.macports.build org.macports.destroot org.macports.install Error: Status 1 encountered during processing. To report a bug, see tconant:~ tconant$