[sanei_debug] Setting debug level of dll to 127.
[dll] sane_init: SANE dll backend version 1.0.13 from sane-backends 1.0.22
[dll] sane_init/read_dlld: attempting to open directory `./dll.d'
[dll] sane_init/read_dlld: attempting to open directory `/opt/local/etc/sane.d/dll.d'
[dll] sane_init/read_dlld: opendir failed: No such file or directory
[dll] sane_init/read_config: reading dll.conf
[dll] add_backend: adding backend `net'
[dll] add_backend: adding backend `abaton'
[dll] add_backend: adding backend `agfafocus'
[dll] add_backend: adding backend `apple'
[dll] add_backend: adding backend `avision'
[dll] add_backend: adding backend `artec'
[dll] add_backend: adding backend `artec_eplus48u'
[dll] add_backend: adding backend `as6e'
[dll] add_backend: adding backend `bh'
[dll] add_backend: adding backend `canon'
[dll] add_backend: adding backend `canon630u'
[dll] add_backend: adding backend `canon_dr'
[dll] add_backend: adding backend `cardscan'
[dll] add_backend: adding backend `coolscan'
[dll] add_backend: adding backend `coolscan3'
[dll] add_backend: adding backend `dell1600n_net'
[dll] add_backend: adding backend `dmc'
[dll] add_backend: adding backend `epjitsu'
[dll] add_backend: adding backend `epson2'
[dll] add_backend: adding backend `fujitsu'
[dll] add_backend: adding backend `genesys'
[dll] add_backend: adding backend `gt68xx'
[dll] add_backend: adding backend `hp'
[dll] add_backend: adding backend `hp3900'
[dll] add_backend: adding backend `hpsj5s'
[dll] add_backend: adding backend `hp3500'
[dll] add_backend: adding backend `hp4200'
[dll] add_backend: adding backend `hp5400'
[dll] add_backend: adding backend `hp5590'
[dll] add_backend: adding backend `hpljm1005'
[dll] add_backend: adding backend `hs2p'
[dll] add_backend: adding backend `ibm'
[dll] add_backend: adding backend `kodak'
[dll] add_backend: adding backend `kvs1025'
[dll] add_backend: adding backend `kvs20xx'
[dll] add_backend: adding backend `leo'
[dll] add_backend: adding backend `lexmark'
[dll] add_backend: adding backend `ma1509'
[dll] add_backend: adding backend `magicolor'
[dll] add_backend: adding backend `matsushita'
[dll] add_backend: adding backend `microtek'
[dll] add_backend: adding backend `microtek2'
[dll] add_backend: adding backend `mustek'
[dll] add_backend: adding backend `mustek_usb'
[dll] add_backend: adding backend `mustek_usb2'
[dll] add_backend: adding backend `nec'
[dll] add_backend: adding backend `niash'
[dll] add_backend: adding backend `pie'
[dll] add_backend: adding backend `pint'
[dll] add_backend: adding backend `pixma'
[dll] add_backend: adding backend `plustek'
[dll] add_backend: adding backend `qcam'
[dll] add_backend: adding backend `ricoh'
[dll] add_backend: adding backend `rts8891'
[dll] add_backend: adding backend `s9036'
[dll] add_backend: adding backend `sceptre'
[dll] add_backend: adding backend `sharp'
[dll] add_backend: adding backend `sm3600'
[dll] add_backend: adding backend `sm3840'
[dll] add_backend: adding backend `snapscan'
[dll] add_backend: adding backend `sp15c'
[dll] add_backend: adding backend `tamarack'
[dll] add_backend: adding backend `teco1'
[dll] add_backend: adding backend `teco2'
[dll] add_backend: adding backend `teco3'
[dll] add_backend: adding backend `u12'
[dll] add_backend: adding backend `umax'
[dll] add_backend: adding backend `umax1220u'
[dll] add_backend: adding backend `v4l'
[dll] add_backend: adding backend `xerox_mfp'
[dll] sane_open: trying to open `epson2:net:2.0.0.72'
[dll] load: searching backend `epson2' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-epson2.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-epson2.1.so'
[dll] init: initializing backend `epson2'
[dll] init: backend `epson2' is version 1.0.124
[dll] sane_open: open successful
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=0)
[dll] sane_control_option(handle=0x7f95d2900090,option=0,action=0,value=0x7fff555470fc,info=0x0)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=0)
[dll] sane_control_option(handle=0x7f95d2900090,option=0,action=0,value=0x7fff55547044,info=0x0)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=1)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=2)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=3)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=4)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=5)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=6)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=7)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=8)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=9)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=10)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=11)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=12)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=13)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=14)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=15)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=16)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=17)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=18)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=19)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=20)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=21)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=22)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=23)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=24)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=25)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=26)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=27)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=28)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=29)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=30)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=31)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=32)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=33)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=34)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=35)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=36)
[dll] sane_control_option(handle=0x7f95d2900090,option=27,action=0,value=0x10a6c3670,info=0x0)
[dll] sane_control_option(handle=0x7f95d2900090,option=25,action=0,value=0x7fff55547040,info=0x0)
[dll] sane_control_option(handle=0x7f95d2900090,option=28,action=0,value=0x10a6c3674,info=0x0)
[dll] sane_control_option(handle=0x7f95d2900090,option=26,action=0,value=0x7fff55547040,info=0x0)
[dll] sane_control_option(handle=0x7f95d2900090,option=25,action=0,value=0x7fff555470f0,info=0x0)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=27)
[dll] sane_control_option(handle=0x7f95d2900090,option=27,action=1,value=0x7fff555470ec,info=0x7fff55547044)
[dll] sane_control_option(handle=0x7f95d2900090,option=26,action=0,value=0x7fff555470f0,info=0x0)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=28)
[dll] sane_control_option(handle=0x7f95d2900090,option=28,action=1,value=0x7fff555470ec,info=0x7fff55547044)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=1)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=2)
[dll] sane_control_option(handle=0x7f95d2900090,option=2,action=0,value=0x7fff55546fe0,info=0x0)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=3)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=4)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=5)
[dll] sane_control_option(handle=0x7f95d2900090,option=5,action=0,value=0x7fff55546fe0,info=0x0)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=6)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=7)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=8)
[dll] sane_control_option(handle=0x7f95d2900090,option=8,action=0,value=0x7fff55546fd0,info=0x0)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=9)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=10)
[dll] sane_control_option(handle=0x7f95d2900090,option=10,action=0,value=0x7fff55546fe0,info=0x0)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=11)
[dll] sane_control_option(handle=0x7f95d2900090,option=11,action=0,value=0x7fff55546fe0,info=0x0)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=12)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=13)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=14)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=15)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=16)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=17)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=18)
[dll] sane_control_option(handle=0x7f95d2900090,option=18,action=0,value=0x7fff55546fe0,info=0x0)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=19)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=20)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=21)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=22)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=23)
Usage: scanimage [OPTION]...

Start image acquisition on a scanner device and write image data to
standard output.

Parameters are separated by a blank from single-character options (e.g.
-d epson) and by a "=" from multi-character options (e.g. --device-name=epson).
-d, --device-name=DEVICE   use a given scanner device (e.g. hp:/dev/scanner)
    --format=pnm|tiff      file format of output file
-i, --icc-profile=PROFILE  include this ICC profile into TIFF file
-L, --list-devices         show available scanner devices
-f, --formatted-device-list=FORMAT similar to -L, but the FORMAT of the output
                           can be specified: %d (device name), %v (vendor),
                           %m (model), %t (type), %i (index number), and
                           %n (newline)
-b, --batch[=FORMAT]       working in batch mode, FORMAT is `out%d.pnm' or
                           `out%d.tif' by default depending on --format
    --batch-start=#        page number to start naming files with
    --batch-count=#        how many pages to scan in batch mode
    --batch-increment=#    increase page number in filename by #
    --batch-double         increment page number by two, same as
                           --batch-increment=2
    --batch-prompt         ask for pressing a key before scanning a page
    --accept-md5-only      only accept authorization requests using md5
-p, --progress             print progress messages
-n, --dont-scan            only set options, don't actually scan
-T, --test                 test backend thoroughly
-A, --all-options          list all available backend options
-h, --help                 display this help message and exit
-v, --verbose              give even more status messages
-B, --buffer-size=#        change input buffer size (in kB, default 32)
-V, --version              print version information

Options specific to device `epson2:net:2.0.0.72':
  Scan Mode:
    --mode Lineart|Gray|Color [Lineart]
        Selects the scan mode (e.g., lineart, monochrome, or color).
    --depth 8 [inactive]
        Number of bits per sample, typical values are 1 for "line-art" and 8
        for multibit scans.
    --halftoning None|Halftone A (Hard Tone)|Halftone B (Soft Tone)|Halftone C (Net Screen)|Dither A (4x4 Bayer)|Dither B (4x4 Spiral)|Dither C (4x4 Net Screen)|Dither D (8x4 Net Screen)|Text Enhanced Technology|Download pattern A|Download pattern B [inactive]
        Selects the halftone.
    --dropout None|Red|Green|Blue [None]
        Selects the dropout.
    --brightness 0..0 [inactive]
        Selects the brightness.
    --sharpness -2..2 [inactive]
        
    --gamma-correction User defined (Gamma=1.0)|User defined (Gamma=1.8) [User defined (Gamma=1.8)]
        Selects the gamma correction value from a list of pre-defined devices
        or the user defined table, which can be downloaded to the scanner
    --color-correction None|Built in CCT profile|User defined CCT profile [inactive]
        Sets the color correction table for the selected output device.
    --resolution 75|100|150|300|600|1200dpi [75]
        Sets the resolution of the scanned image.
    --threshold 0..255 [128]
        Select minimum-brightness to get a white point
  Advanced:
    --mirror[=(yes|no)] [inactive]
        Mirror the image.
    --auto-area-segmentation[=(yes|no)] [inactive]
        Enables different dithering modes in image and text areas
    --red-gamma-table 0..255,...
        Gamma-correction table for the red band.
    --green-gamma-table 0..255,...
        Gamma-correction table for the green band.
    --blue-gamma-table 0..255,...
        Gamma-correction table for the blue band.
    --wait-for-button[=(yes|no)] [no]
        After sending the scan command, wait until the button on the scanner
        is pressed to actually start the scan process.
  Color correction:
    --cct-type Automatic|Reflective|Colour negatives|Monochrome negatives|Colour positives [inactive]
        Color correction profile type
    --cct-profile -2..2,...
        Color correction profile data
  Preview:
    --preview[=(yes[dll] sane_control_option(handle=0x7f95d2900090,option=23,action=0,value=0x7fff55546fe0,info=0x0)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=24)
[dll] sane_control_option(handle=0x7f95d2900090,option=25,action=0,value=0x7fff55546fe0,info=0x0)
[dll] sane_control_option(handle=0x7f95d2900090,option=26,action=0,value=0x7fff55546fe0,info=0x0)
[dll] sane_control_option(handle=0x7f95d2900090,option=27,action=0,value=0x7fff55546fe0,info=0x0)
[dll] sane_control_option(handle=0x7f95d2900090,option=28,action=0,value=0x7fff55546fe0,info=0x0)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=29)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=30)
[dll] sane_control_option(handle=0x7f95d2900090,option=30,action=0,value=0x7fff55546fd0,info=0x0)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=31)
[dll] sane_control_option(handle=0x7f95d2900090,option=31,action=0,value=0x7fff55546fe0,info=0x0)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=32)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=33)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=34)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=35)
[dll] sane_control_option(handle=0x7f95d2900090,option=35,action=0,value=0x7fff55546fe0,info=0x0)
[dll] sane_get_option_descriptor(handle=0x7f95d2900090,option=36)
[dll] sane_get_devices
[dll] load: searching backend `xerox_mfp' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-xerox_mfp.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-xerox_mfp.1.so'
[dll] init: initializing backend `xerox_mfp'
[dll] init: backend `xerox_mfp' is version 1.0.12
[dll] load: searching backend `v4l' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-v4l.1.so'
[dll] load: couldn't open `/opt/local/lib/sane/libsane-v4l.1.so' (No such file or directory)
[dll] load: couldn't find backend `v4l' (No such file or directory)
[dll] load: searching backend `umax1220u' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-umax1220u.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-umax1220u.1.so'
[dll] init: initializing backend `umax1220u'
[dll] init: backend `umax1220u' is version 1.0.2
[dll] load: searching backend `umax' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-umax.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-umax.1.so'
[dll] init: initializing backend `umax'
[dll] init: backend `umax' is version 1.0.45
[dll] load: searching backend `u12' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-u12.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-u12.1.so'
[dll] init: initializing backend `u12'
[dll] init: backend `u12' is version 1.0.0
[dll] load: searching backend `teco3' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-teco3.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-teco3.1.so'
[dll] init: initializing backend `teco3'
[dll] init: backend `teco3' is version 1.0.1
[dll] load: searching backend `teco2' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-teco2.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-teco2.1.so'
[dll] init: initializing backend `teco2'
[dll] init: backend `teco2' is version 1.0.10
[dll] load: searching backend `teco1' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-teco1.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-teco1.1.so'
[dll] init: initializing backend `teco1'
[dll] init: backend `teco1' is version 1.0.10
[dll] load: searching backend `tamarack' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-tamarack.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-tamarack.1.so'
[dll] init: initializing backend `tamarack'
[dll] init: backend `tamarack' is version 1.0.0
[dll] load: searching backend `sp15c' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-sp15c.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-sp15c.1.so'
[dll] init: initializing backend `sp15c'
[dll] init: backend `sp15c' is version 1.0.0
[dll] load: searching backend `snapscan' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-snapscan.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-snapscan.1.so'
[dll] init: initializing backend `snapscan'
[dll] init: backend `snapscan' is version 1.4.53
[dll] load: searching backend `sm3840' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-sm3840.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-sm3840.1.so'
[dll] init: initializing backend `sm3840'
[dll] init: backend `sm3840' is version 1.0.0
[dll] load: searching backend `sm3600' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-sm3600.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-sm3600.1.so'
[dll] init: initializing backend `sm3600'
[dll] init: backend `sm3600' is version 1.0.6
[dll] load: searching backend `sharp' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-sharp.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-sharp.1.so'
[dll] init: initializing backend `sharp'
[dll] init: backend `sharp' is version 1.0.0
[dll] load: searching backend `sceptre' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-sceptre.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-sceptre.1.so'
[dll] init: initializing backend `sceptre'
[dll] init: backend `sceptre' is version 1.0.10
[dll] load: searching backend `s9036' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-s9036.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-s9036.1.so'
[dll] init: initializing backend `s9036'
[dll] init: backend `s9036' is version 1.0.0
[dll] load: searching backend `rts8891' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-rts8891.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-rts8891.1.so'
[dll] init: initializing backend `rts8891'
[dll] init: backend `rts8891' is version 1.0.31
[dll] load: searching backend `ricoh' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-ricoh.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-ricoh.1.so'
[dll] init: initializing backend `ricoh'
[dll] init: backend `ricoh' is version 1.0.0
[dll] load: searching backend `qcam' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-qcam.1.so'
[dll] load: couldn't open `/opt/local/lib/sane/libsane-qcam.1.so' (No such file or directory)
[dll] load: couldn't find backend `qcam' (No such file or directory)
[dll] load: searching backend `plustek' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-plustek.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-plustek.1.so'
[dll] init: initializing backend `plustek'
[dll] init: backend `plustek' is version 1.0.0
[dll] load: searching backend `pixma' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-pixma.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-pixma.1.so'
[dll] init: initializing backend `pixma'
[dll] init: backend `pixma' is version 1.0.16
[dll] load: searching backend `pint' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-pint.1.so'
[dll] load: couldn't open `/opt/local/lib/sane/libsane-pint.1.so' (No such file or directory)
[dll] load: couldn't find backend `pint' (No such file or directory)
[dll] load: searching backend `pie' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-pie.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-pie.1.so'
[dll] init: initializing backend `pie'
[dll] init: backend `pie' is version 1.0.9
[dll] load: searching backend `niash' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-niash.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-niash.1.so'
[dll] init: initializing backend `niash'
[dll] init: backend `niash' is version 1.0.1
[dll] load: searching backend `nec' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-nec.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-nec.1.so'
[dll] init: initializing backend `nec'
[dll] init: backend `nec' is version 1.0.0
[dll] load: searching backend `mustek_usb2' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-mustek_usb2.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-mustek_usb2.1.so'
[dll] init: initializing backend `mustek_usb2'
[dll] init: backend `mustek_usb2' is version 1.0.10
[dll] load: searching backend `mustek_usb' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-mustek_usb.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-mustek_usb.1.so'
[dll] init: initializing backend `mustek_usb'
[dll] init: backend `mustek_usb' is version 1.0.18
[dll] load: searching backend `mustek' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-mustek.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-mustek.1.so'
[dll] init: initializing backend `mustek'
[dll] init: backend `mustek' is version 1.0.138
[dll] load: searching backend `microtek2' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-microtek2.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-microtek2.1.so'
[dll] init: initializing backend `microtek2'
[dll] init: backend `microtek2' is version 1.0.0
[dll] load: searching backend `microtek' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-microtek.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-microtek.1.so'
[dll] init: initializing backend `microtek'
[dll] init: backend `microtek' is version 1.0.0
[dll] load: searching backend `matsushita' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-matsushita.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-matsushita.1.so'
[dll] init: initializing backend `matsushita'
[dll] init: backend `matsushita' is version 1.0.7
[dll] load: searching backend `magicolor' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-magicolor.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-magicolor.1.so'
[dll] init: initializing backend `magicolor'
[dll] init: backend `magicolor' is version 1.0.1
[dll] load: searching backend `ma1509' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-ma1509.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-ma1509.1.so'
[dll] init: initializing backend `ma1509'
[dll] init: backend `ma1509' is version 1.0.3
[dll] load: searching backend `lexmark' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-lexmark.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-lexmark.1.so'
[dll] init: initializing backend `lexmark'
[dll] init: backend `lexmark' is version 1.0.30
[dll] load: searching backend `leo' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-leo.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-leo.1.so'
[dll] init: initializing backend `leo'
[dll] init: backend `leo' is version 1.0.11
[dll] load: searching backend `kvs20xx' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-kvs20xx.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-kvs20xx.1.so'
[dll] init: initializing backend `kvs20xx'
[dll] init: backend `kvs20xx' is version 1.0.2
[dll] load: searching backend `kvs1025' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-kvs1025.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-kvs1025.1.so'
[dll] init: initializing backend `kvs1025'
[dll] init: backend `kvs1025' is version 1.0.3
[dll] load: searching backend `kodak' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-kodak.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-kodak.1.so'
[dll] init: initializing backend `kodak'
[dll] init: backend `kodak' is version 1.0.7
[dll] load: searching backend `ibm' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-ibm.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-ibm.1.so'
[dll] init: initializing backend `ibm'
[dll] init: backend `ibm' is version 1.0.0
[dll] load: searching backend `hs2p' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-hs2p.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-hs2p.1.so'
[dll] init: initializing backend `hs2p'
[dll] init: backend `hs2p' is version 1.0.0
[dll] load: searching backend `hpljm1005' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-hpljm1005.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-hpljm1005.1.so'
[dll] init: initializing backend `hpljm1005'
[dll] init: backend `hpljm1005' is version 1.0.1
[dll] load: searching backend `hp5590' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-hp5590.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-hp5590.1.so'
[dll] init: initializing backend `hp5590'
[dll] init: backend `hp5590' is version 1.0.5
[dll] load: searching backend `hp5400' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-hp5400.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-hp5400.1.so'
[dll] init: initializing backend `hp5400'
[dll] init: backend `hp5400' is version 1.0.3
[dll] load: searching backend `hp4200' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-hp4200.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-hp4200.1.so'
[dll] init: initializing backend `hp4200'
[dll] init: backend `hp4200' is version 1.0.0
[dll] load: searching backend `hp3500' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-hp3500.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-hp3500.1.so'
[dll] init: initializing backend `hp3500'
[dll] init: backend `hp3500' is version 1.0.0
[dll] load: searching backend `hpsj5s' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-hpsj5s.1.so'
[dll] load: couldn't open `/opt/local/lib/sane/libsane-hpsj5s.1.so' (No such file or directory)
[dll] load: couldn't find backend `hpsj5s' (No such file or directory)
[dll] load: searching backend `hp3900' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-hp3900.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-hp3900.1.so'
[dll] init: initializing backend `hp3900'
[dll] init: backend `hp3900' is version 1.0.0
[dll] load: searching backend `hp' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-hp.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-hp.1.so'
[dll] init: initializing backend `hp'
[dll] init: backend `hp' is version 1.0.8
[dll] load: searching backend `gt68xx' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-gt68xx.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-gt68xx.1.so'
[dll] init: initializing backend `gt68xx'
[dll] init: backend `gt68xx' is version 1.0.84
[dll] load: searching backend `genesys' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-genesys.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-genesys.1.so'
[dll] init: initializing backend `genesys'
[dll] init: backend `genesys' is version 1.0.63
[dll] load: searching backend `fujitsu' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-fujitsu.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-fujitsu.1.so'
[dll] init: initializing backend `fujitsu'
[dll] init: backend `fujitsu' is version 1.0.106
[dll] load: searching backend `epjitsu' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-epjitsu.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-epjitsu.1.so'
[dll] init: initializing backend `epjitsu'
[dll] init: backend `epjitsu' is version 1.0.20
[dll] load: searching backend `dmc' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-dmc.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-dmc.1.so'
[dll] init: initializing backend `dmc'
[dll] init: backend `dmc' is version 1.0.0
[dll] load: searching backend `dell1600n_net' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-dell1600n_net.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-dell1600n_net.1.so'
[dll] init: initializing backend `dell1600n_net'
[dll] init: backend `dell1600n_net' is version 1.0.0
[dll] load: searching backend `coolscan3' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-coolscan3.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-coolscan3.1.so'
[dll] init: initializing backend `coolscan3'
[dll] init: backend `coolscan3' is version 1.0.0
[dll] load: searching backend `coolscan' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-coolscan.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-coolscan.1.so'
[dll] init: initializing backend `coolscan'
[dll] init: backend `coolscan' is version 1.0.0
[dll] load: searching backend `cardscan' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-cardscan.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-cardscan.1.so'
[dll] init: initializing backend `cardscan'
[dll] init: backend `cardscan' is version 1.0.2
[dll] load: searching backend `canon_dr' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-canon_dr.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-canon_dr.1.so'
[dll] init: initializing backend `canon_dr'
[dll] init: backend `canon_dr' is version 1.0.37
[dll] load: searching backend `canon630u' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-canon630u.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-canon630u.1.so'
[dll] init: initializing backend `canon630u'
[dll] init: backend `canon630u' is version 1.0.1
[dll] load: searching backend `canon' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-canon.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-canon.1.so'
[dll] init: initializing backend `canon'
[dll] init: backend `canon' is version 1.0.0
[dll] load: searching backend `bh' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-bh.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-bh.1.so'
[dll] init: initializing backend `bh'
[dll] init: backend `bh' is version 1.0.4
[dll] load: searching backend `as6e' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-as6e.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-as6e.1.so'
[dll] init: initializing backend `as6e'
[dll] load: searching backend `artec_eplus48u' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-artec_eplus48u.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-artec_eplus48u.1.so'
[dll] init: initializing backend `artec_eplus48u'
[dll] init: backend `artec_eplus48u' is version 1.0.0
[dll] load: searching backend `artec' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-artec.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-artec.1.so'
[dll] init: initializing backend `artec'
[dll] init: backend `artec' is version 1.0.0
[dll] load: searching backend `avision' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-avision.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-avision.1.so'
[dll] init: initializing backend `avision'
[dll] init: backend `avision' is version 1.0.294
[dll] load: searching backend `apple' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-apple.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-apple.1.so'
[dll] init: initializing backend `apple'
[dll] init: backend `apple' is version 1.0.0
[dll] load: searching backend `agfafocus' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-agfafocus.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-agfafocus.1.so'
[dll] init: initializing backend `agfafocus'
[dll] init: backend `agfafocus' is version 1.0.0
[dll] load: searching backend `abaton' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-abaton.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-abaton.1.so'
[dll] init: initializing backend `abaton'
[dll] init: backend `abaton' is version 1.0.0
[dll] load: searching backend `net' in `/opt/local/lib/sane'
[dll] load: trying to load `/opt/local/lib/sane/libsane-net.1.so'
[dll] load: dlopen()ing `/opt/local/lib/sane/libsane-net.1.so'
[dll] init: initializing backend `net'
[dll] init: backend `net' is version 1.0.22
[dll] sane_get_devices: found 0 devices
[dll] sane_close(handle=0x7f95d2900090)
[dll] sane_exit: exiting
[dll] sane_exit: calling backend `xerox_mfp's exit function
[dll] sane_exit: calling backend `umax1220u's exit function
[dll] sane_exit: calling backend `umax's exit function
[dll] sane_exit: calling backend `u12's exit function
[dll] sane_exit: calling backend `teco3's exit function
[dll] sane_exit: calling backend `teco2's exit function
[dll] sane_exit: calling backend `teco1's exit function
[dll] sane_exit: calling backend `tamarack's exit function
[dll] sane_exit: calling backend `sp15c's exit function
[dll] sane_exit: calling backend `snapscan's exit function
[dll] sane_exit: calling backend `sm3840's exit function
[dll] sane_exit: calling backend `sm3600's exit function
[dll] sane_exit: calling backend `sharp's exit function
[dll] sane_exit: calling backend `sceptre's exit function
[dll] sane_exit: calling backend `s9036's exit function
[dll] sane_exit: calling backend `rts8891's exit function
[dll] sane_exit: calling backend `ricoh's exit function
[dll] sane_exit: calling backend `plustek's exit function
[dll] sane_exit: calling backend `pixma's exit function