sudo port -dv install qca

DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/qca
DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Executing variant universal provides universal
DEBUG: Starting logging for qca
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: pkgconfig 0.25_1 exists in the ports tree
DEBUG: pkgconfig 0.25_1 +universal is the latest installed
DEBUG: pkgconfig 0.25_1 +universal is active
DEBUG: Merging existing variants '+universal' into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! pkgconfig 0.25_1 >= pkgconfig 0.25_1
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: qt4-mac 4.6.3_6 exists in the ports tree
DEBUG: qt4-mac 4.6.3_6 +universal is the latest installed
DEBUG: qt4-mac 4.6.3_6 +universal is active
DEBUG: Merging existing variants '+universal' into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/aqua/qt4-mac
DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! qt4-mac 4.6.3_6 >= qt4-mac 4.6.3_6
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: zlib 1.2.5_0 exists in the ports tree
DEBUG: zlib 1.2.5_0 +universal is the latest installed
DEBUG: zlib 1.2.5_0 +universal is active
DEBUG: Merging existing variants '+universal' into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: dbus 1.2.24_1 exists in the ports tree
DEBUG: dbus 1.2.24_1 +universal is the latest installed
DEBUG: dbus 1.2.24_1 +universal is active
DEBUG: Merging existing variants '+universal' into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/dbus
DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! dbus 1.2.24_1 >= dbus 1.2.24_1
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: expat 2.0.1_0 exists in the ports tree
DEBUG: expat 2.0.1_0  is the latest installed
DEBUG: expat 2.0.1_0 +universal is active
DEBUG: Merging existing variants '+universal' into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
DEBUG: epoch: in tree: 1 installed: 1
DEBUG: openssl 1.0.0a_0 exists in the ports tree
DEBUG: openssl 1.0.0a_0 +universal is the latest installed
DEBUG: openssl 1.0.0a_0 +universal is active
DEBUG: Merging existing variants '+universal' into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! openssl 1.0.0a_0 >= openssl 1.0.0a_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: sqlite3 3.7.1_0 exists in the ports tree
DEBUG: sqlite3 3.7.1_0 +universal is the latest installed
DEBUG: sqlite3 3.7.1_0 +universal is active
DEBUG: Merging existing variants '+universal' into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3
DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! sqlite3 3.7.1_0 >= sqlite3 3.7.1_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: readline 6.1.000_1 exists in the ports tree
DEBUG: readline 6.1.000_1 +darwin+universal is the latest installed
DEBUG: readline 6.1.000_1 +darwin+universal is active
DEBUG: Merging existing variants '+darwin+universal' into variants
DEBUG: new fully merged portvariants: universal + darwin +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port readline.
DEBUG: Executing variant universal provides universal
DEBUG: Skipping upgrade since readline 6.1.000_1 >= readline 6.1.000_1, even though installed variants "+darwin+universal" do not match "+universal".
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncurses 5.7_0 exists in the ports tree
DEBUG: ncurses 5.7_0 +darwin_10 is the latest installed
DEBUG: ncurses 5.7_0 +darwin_10+universal is active
DEBUG: Merging existing variants '+darwin_10+universal' into variants
DEBUG: new fully merged portvariants: universal + darwin_10 +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin_10 is not provided by port ncurses.
DEBUG: Executing variant universal provides universal
DEBUG: Skipping upgrade since ncurses 5.7_0 >= ncurses 5.7_0, even though installed variants "+darwin_10+universal" do not match "+universal".
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncursesw 5.7_0 exists in the ports tree
DEBUG: ncursesw 5.7_0 +darwin_10 is the latest installed
DEBUG: ncursesw 5.7_0 +darwin_10+universal is active
DEBUG: Merging existing variants '+darwin_10+universal' into variants
DEBUG: new fully merged portvariants: universal + darwin_10 +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin_10 is not provided by port ncursesw.
DEBUG: Executing variant universal provides universal
DEBUG: Skipping upgrade since ncursesw 5.7_0 >= ncursesw 5.7_0, even though installed variants "+darwin_10+universal" do not match "+universal".
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: tiff 3.9.4_0 exists in the ports tree
DEBUG: tiff 3.9.4_0 +universal is the latest installed
DEBUG: tiff 3.9.4_0 +universal is active
DEBUG: Merging existing variants '+universal' into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff
DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! tiff 3.9.4_0 >= tiff 3.9.4_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: jpeg 8b_0 exists in the ports tree
DEBUG: jpeg 8b_0 +universal is the latest installed
DEBUG: jpeg 8b_0 +universal is active
DEBUG: Merging existing variants '+universal' into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg
DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! jpeg 8b_0 >= jpeg 8b_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libpng 1.2.44_0 exists in the ports tree
DEBUG: libpng 1.2.44_0 +universal is the latest installed
DEBUG: libpng 1.2.44_0 +universal is active
DEBUG: Merging existing variants '+universal' into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng
DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! libpng 1.2.44_0 >= libpng 1.2.44_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libmng 1.0.10_2 exists in the ports tree
DEBUG: libmng 1.0.10_2 +universal is the latest installed
DEBUG: libmng 1.0.10_2 +universal is active
DEBUG: Merging existing variants '+universal' into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libmng
DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! libmng 1.0.10_2 >= libmng 1.0.10_2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: lcms 1.19_2 exists in the ports tree
DEBUG: lcms 1.19_2 +universal is the latest installed
DEBUG: lcms 1.19_2 +universal is active
DEBUG: Merging existing variants '+universal' into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/lcms
DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Executing variant universal provides universal
DEBUG: No need to upgrade! lcms 1.19_2 >= lcms 1.19_2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: qt4_select 0.3_3 exists in the ports tree
DEBUG: qt4_select 0.3_3  is the latest installed
DEBUG: qt4_select 0.3_3  is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants: universal +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/qt4_select
DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
DEBUG: only one arch supported, so not adding the default universal variant
DEBUG: Requested variant universal is not provided by port qt4_select.
DEBUG: No need to upgrade! qt4_select 0.3_3 >= qt4_select 0.3_3
--->  Computing dependencies for qca
DEBUG: Searching for dependency: pkgconfig
DEBUG: Found Dependency: receipt exists for pkgconfig
DEBUG: Searching for dependency: qt4-mac
DEBUG: Found Dependency: receipt exists for qt4-mac
DEBUG: Executing org.macports.main (qca)
DEBUG: Skipping completed org.macports.fetch (qca)
DEBUG: Skipping completed org.macports.checksum (qca)
DEBUG: setting option extract.cmd to /usr/bin/bzip2
DEBUG: Skipping completed org.macports.extract (qca)
DEBUG: Skipping completed org.macports.patch (qca)
DEBUG: Skipping completed org.macports.configure (qca)
--->  Building qca
DEBUG: build phase started at Thu Aug 26 17:35:36 EST 2010
DEBUG: Executing org.macports.build (qca)
DEBUG: Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_qca/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6'
DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_qca/work/qca-2.0.2" && /usr/bin/make -j2 all'
make: *** No rule to make target `all'.  Stop.
shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_qca/work/qca-2.0.2" && /usr/bin/make -j2 all " returned error 2
Error: Target org.macports.build returned: shell command failed
DEBUG: Backtrace: shell command failed
    while executing
"command_exec build"
    (procedure "portbuild::build_main" line 8)
    invoked from within
"$procedure $targetname"
Warning: the following items did not execute (for qca): org.macports.activate org.macports.build org.macports.destroot org.macports.install
Log for qca is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_qca/main.log
Error: Status 1 encountered during processing.