version:1 :debug:main epoch: in tree: 0 installed: 0 :debug:main pkgconfig 0.26_0 exists in the ports tree :debug:main pkgconfig 0.26_0 is the latest installed :debug:main pkgconfig 0.26_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! pkgconfig 0.26_0 >= pkgconfig 0.26_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main glib2 2.30.2_1 exists in the ports tree :debug:main glib2 2.30.2_1 is the latest installed :debug:main glib2 2.30.2_1 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/glib2 :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! glib2 2.30.2_1 >= glib2 2.30.2_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main gettext 0.18.1.1_2 exists in the ports tree :debug:main gettext 0.18.1.1_2 is the latest installed :debug:main gettext 0.18.1.1_2 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2 :debug:main epoch: in tree: 0 installed: 0 :debug:main libiconv 1.14_0 exists in the ports tree :debug:main libiconv 1.14_0 is the latest installed :debug:main libiconv 1.14_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main ncurses 5.9_1 exists in the ports tree :debug:main ncurses 5.9_1 is the latest installed :debug:main ncurses 5.9_1 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main expat 2.0.1_1 exists in the ports tree :debug:main expat 2.0.1_1 is the latest installed :debug:main expat 2.0.1_1 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main zlib 1.2.5_0 exists in the ports tree :debug:main zlib 1.2.5_0 is the latest installed :debug:main zlib 1.2.5_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main libffi 3.0.10_2 exists in the ports tree :debug:main libffi 3.0.10_2 is the latest installed :debug:main libffi 3.0.10_2 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libffi :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! libffi 3.0.10_2 >= libffi 3.0.10_2 :debug:main epoch: in tree: 0 installed: 0 :debug:main perl5 5.12.3_1 exists in the ports tree :debug:main perl5 5.12.3_1 +perl5_12 is the latest installed :debug:main perl5 5.12.3_1 +perl5_12 is active :debug:main Merging existing variants '+perl5_12' into variants :debug:main new fully merged portvariants: perl5_12 + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main universal_variant is false, so not adding the default universal variant :debug:main Executing variant perl5_12 provides perl5_12 :debug:main No need to upgrade! perl5 5.12.3_1 >= perl5 5.12.3_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main perl5.12 5.12.3_2 exists in the ports tree :debug:main perl5.12 5.12.3_2 is the latest installed :debug:main perl5.12 5.12.3_2 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.12 :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! perl5.12 5.12.3_2 >= perl5.12 5.12.3_2 :debug:main epoch: in tree: 0 installed: 0 :debug:main gdbm 1.10_0 exists in the ports tree :debug:main gdbm 1.10_0 is the latest installed :debug:main gdbm 1.10_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! gdbm 1.10_0 >= gdbm 1.10_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main fontconfig 2.8.0_0 exists in the ports tree :debug:main fontconfig 2.8.0_0 is the latest installed :debug:main fontconfig 2.8.0_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! fontconfig 2.8.0_0 >= fontconfig 2.8.0_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main freetype 2.4.8_0 exists in the ports tree :debug:main freetype 2.4.8_0 is the latest installed :debug:main freetype 2.4.8_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! freetype 2.4.8_0 >= freetype 2.4.8_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main bzip2 1.0.6_0 exists in the ports tree :debug:main bzip2 1.0.6_0 is the latest installed :debug:main bzip2 1.0.6_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2 :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main libxml2 2.7.8_0 exists in the ports tree :debug:main libxml2 2.7.8_0 is the latest installed :debug:main libxml2 2.7.8_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2 :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! libxml2 2.7.8_0 >= libxml2 2.7.8_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main gtk2 2.24.8_1 exists in the ports tree :debug:main gtk2 2.24.8_1 +x11 is the latest installed :debug:main gtk2 2.24.8_1 +x11 is active :debug:main Merging existing variants '+x11' into variants :debug:main new fully merged portvariants: x11 + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gtk2 :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl :debug:main universal variant already exists, so not adding the default one :debug:main Executing variant x11 provides x11 :debug:main No need to upgrade! gtk2 2.24.8_1 >= gtk2 2.24.8_1 :debug:main epoch: in tree: 2 installed: 2 :debug:main atk 1.32.0_0 exists in the ports tree :debug:main atk 2.2.0_0 is the latest installed :debug:main atk 2.2.0_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/atk :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! atk 2.2.0_0 >= atk 1.32.0_0 :debug:main epoch: in tree: 1 installed: 1 :debug:main pango 1.28.4_2 exists in the ports tree :debug:main pango 1.28.4_2 +x11 is the latest installed :debug:main pango 1.28.4_2 +x11 is active :debug:main Merging existing variants '+x11' into variants :debug:main new fully merged portvariants: x11 + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/pango :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main adding the default universal variant :debug:main Executing variant x11 provides x11 :debug:main No need to upgrade! pango 1.28.4_2 >= pango 1.28.4_2 :debug:main epoch: in tree: 0 installed: 0 :debug:main cairo 1.10.2_4 exists in the ports tree :debug:main cairo 1.10.2_4 +x11 is the latest installed :debug:main cairo 1.10.2_4 +x11 is active :debug:main Merging existing variants '+x11' into variants :debug:main new fully merged portvariants: x11 + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/cairo :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl :debug:main universal variant already exists, so not adding the default one :debug:main Executing variant x11 provides x11 :debug:main No need to upgrade! cairo 1.10.2_4 >= cairo 1.10.2_4 :debug:main epoch: in tree: 0 installed: 0 :debug:main libpixman 0.24.0_0 exists in the ports tree :debug:main libpixman 0.24.0_0 is the latest installed :debug:main libpixman 0.24.0_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpixman :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! libpixman 0.24.0_0 >= libpixman 0.24.0_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main libpng 1.4.8_0 exists in the ports tree :debug:main libpng 1.4.8_0 is the latest installed :debug:main libpng 1.4.8_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! libpng 1.4.8_0 >= libpng 1.4.8_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xrender 0.9.6_1 exists in the ports tree :debug:main xrender 0.9.6_1 is the latest installed :debug:main xrender 0.9.6_1 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! xrender 0.9.6_1 >= xrender 0.9.6_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libX11 1.4.4_0 exists in the ports tree :debug:main xorg-libX11 1.4.4_0 is the latest installed :debug:main xorg-libX11 1.4.4_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11 :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! xorg-libX11 1.4.4_0 >= xorg-libX11 1.4.4_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libXdmcp 1.1.0_0 exists in the ports tree :debug:main xorg-libXdmcp 1.1.0_0 is the latest installed :debug:main xorg-libXdmcp 1.1.0_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! xorg-libXdmcp 1.1.0_0 >= xorg-libXdmcp 1.1.0_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libXau 1.0.6_0 exists in the ports tree :debug:main xorg-libXau 1.0.6_0 is the latest installed :debug:main xorg-libXau 1.0.6_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! xorg-libXau 1.0.6_0 >= xorg-libXau 1.0.6_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-xproto 7.0.22_0 exists in the ports tree :debug:main xorg-xproto 7.0.22_0 is the latest installed :debug:main xorg-xproto 7.0.22_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main only one arch supported, so not adding the default universal variant :debug:main No need to upgrade! xorg-xproto 7.0.22_0 >= xorg-xproto 7.0.22_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libxcb 1.7_0 exists in the ports tree :debug:main xorg-libxcb 1.7_0 +python26 is the latest installed :debug:main xorg-libxcb 1.7_0 +python26 is active :debug:main Merging existing variants '+python26' into variants :debug:main new fully merged portvariants: python26 + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libxcb :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Executing variant python26 provides python26 :debug:main No need to upgrade! xorg-libxcb 1.7_0 >= xorg-libxcb 1.7_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-xcb-proto 1.6_0 exists in the ports tree :debug:main xorg-xcb-proto 1.6_0 +python26 is the latest installed :debug:main xorg-xcb-proto 1.6_0 +python26 is active :debug:main Merging existing variants '+python26' into variants :debug:main new fully merged portvariants: python26 + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcb-proto :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main only one arch supported, so not adding the default universal variant :debug:main Executing variant python26 provides python26 :debug:main No need to upgrade! xorg-xcb-proto 1.6_0 >= xorg-xcb-proto 1.6_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main python26 2.6.7_3 exists in the ports tree :debug:main python26 2.6.7_3 is the latest installed :debug:main python26 2.6.7_3 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python26 :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! python26 2.6.7_3 >= python26 2.6.7_3 :debug:main epoch: in tree: 1 installed: 1 :debug:main openssl 1.0.0e_1 exists in the ports tree :debug:main openssl 1.0.0e_1 is the latest installed :debug:main openssl 1.0.0e_1 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! openssl 1.0.0e_1 >= openssl 1.0.0e_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main sqlite3 3.7.9_0 exists in the ports tree :debug:main sqlite3 3.7.9_0 is the latest installed :debug:main sqlite3 3.7.9_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3 :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! sqlite3 3.7.9_0 >= sqlite3 3.7.9_0 :debug:main epoch: in tree: 20090923 installed: 20090923 :debug:main libedit 20110802-3.0_0 exists in the ports tree :debug:main libedit 20110802-3.0_0 is the latest installed :debug:main libedit 20110802-3.0_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libedit :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! libedit 20110802-3.0_0 >= libedit 20110802-3.0_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main db46 4.6.21_6 exists in the ports tree :debug:main db46 4.6.21_6 is the latest installed :debug:main db46 4.6.21_6 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46 :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6 :debug:main epoch: in tree: 0 installed: 0 :debug:main python_select 0.3_1 exists in the ports tree :debug:main python_select 0.3_1 is the latest installed :debug:main python_select 0.3_1 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/python_select :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl :debug:main universal_variant is false, so not adding the default universal variant :debug:main No need to upgrade! python_select 0.3_1 >= python_select 0.3_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libpthread-stubs 0.3_0 exists in the ports tree :debug:main xorg-libpthread-stubs 0.3_0 is the latest installed :debug:main xorg-libpthread-stubs 0.3_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libpthread-stubs :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main only one arch supported, so not adding the default universal variant :debug:main No need to upgrade! xorg-libpthread-stubs 0.3_0 >= xorg-libpthread-stubs 0.3_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-kbproto 1.0.5_0 exists in the ports tree :debug:main xorg-kbproto 1.0.5_0 is the latest installed :debug:main xorg-kbproto 1.0.5_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main only one arch supported, so not adding the default universal variant :debug:main No need to upgrade! xorg-kbproto 1.0.5_0 >= xorg-kbproto 1.0.5_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-renderproto 0.11.1_0 exists in the ports tree :debug:main xorg-renderproto 0.11.1_0 is the latest installed :debug:main xorg-renderproto 0.11.1_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-renderproto :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main only one arch supported, so not adding the default universal variant :debug:main No need to upgrade! xorg-renderproto 0.11.1_0 >= xorg-renderproto 0.11.1_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-xcb-util 0.3.8_0 exists in the ports tree :debug:main xorg-xcb-util 0.3.8_0 is the latest installed :debug:main xorg-xcb-util 0.3.8_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcb-util :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! xorg-xcb-util 0.3.8_0 >= xorg-xcb-util 0.3.8_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main Xft2 2.2.0_0 exists in the ports tree :debug:main Xft2 2.2.0_0 is the latest installed :debug:main Xft2 2.2.0_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2 :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! Xft2 2.2.0_0 >= Xft2 2.2.0_0 :debug:main epoch: in tree: 2 installed: 2 :debug:main gdk-pixbuf2 2.22.1_1 exists in the ports tree :debug:main gdk-pixbuf2 2.22.1_1 is the latest installed :debug:main gdk-pixbuf2 2.22.1_1 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/gdk-pixbuf2 :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! gdk-pixbuf2 2.22.1_1 >= gdk-pixbuf2 2.22.1_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main jasper 1.900.1_8 exists in the ports tree :debug:main jasper 1.900.1_8 is the latest installed :debug:main jasper 1.900.1_8 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jasper :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! jasper 1.900.1_8 >= jasper 1.900.1_8 :debug:main epoch: in tree: 0 installed: 0 :debug:main jpeg 8c_0 exists in the ports tree :debug:main jpeg 8c_0 is the latest installed :debug:main jpeg 8c_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! jpeg 8c_0 >= jpeg 8c_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main tiff 3.9.5_0 exists in the ports tree :debug:main tiff 3.9.5_0 is the latest installed :debug:main tiff 3.9.5_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! tiff 3.9.5_0 >= tiff 3.9.5_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libXi 1.4.3_0 exists in the ports tree :debug:main xorg-libXi 1.4.3_0 is the latest installed :debug:main xorg-libXi 1.4.3_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXi :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! xorg-libXi 1.4.3_0 >= xorg-libXi 1.4.3_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libXext 1.3.0_0 exists in the ports tree :debug:main xorg-libXext 1.3.0_0 is the latest installed :debug:main xorg-libXext 1.3.0_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXext :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! xorg-libXext 1.3.0_0 >= xorg-libXext 1.3.0_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-xextproto 7.2.0_0 exists in the ports tree :debug:main xorg-xextproto 7.2.0_0 is the latest installed :debug:main xorg-xextproto 7.2.0_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main only one arch supported, so not adding the default universal variant :debug:main No need to upgrade! xorg-xextproto 7.2.0_0 >= xorg-xextproto 7.2.0_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-inputproto 2.0.99.1_0 exists in the ports tree :debug:main xorg-inputproto 2.0.99.1_0 is the latest installed :debug:main xorg-inputproto 2.0.99.1_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-inputproto :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main only one arch supported, so not adding the default universal variant :debug:main No need to upgrade! xorg-inputproto 2.0.99.1_0 >= xorg-inputproto 2.0.99.1_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libXrandr 1.3.2_0 exists in the ports tree :debug:main xorg-libXrandr 1.3.2_0 is the latest installed :debug:main xorg-libXrandr 1.3.2_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXrandr :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! xorg-libXrandr 1.3.2_0 >= xorg-libXrandr 1.3.2_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-randrproto 1.3.2_0 exists in the ports tree :debug:main xorg-randrproto 1.3.2_0 is the latest installed :debug:main xorg-randrproto 1.3.2_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-randrproto :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main only one arch supported, so not adding the default universal variant :debug:main No need to upgrade! xorg-randrproto 1.3.2_0 >= xorg-randrproto 1.3.2_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libXcursor 1.1.12_0 exists in the ports tree :debug:main xorg-libXcursor 1.1.12_0 is the latest installed :debug:main xorg-libXcursor 1.1.12_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXcursor :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! xorg-libXcursor 1.1.12_0 >= xorg-libXcursor 1.1.12_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libXfixes 5.0_0 exists in the ports tree :debug:main xorg-libXfixes 5.0_0 is the latest installed :debug:main xorg-libXfixes 5.0_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXfixes :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! xorg-libXfixes 5.0_0 >= xorg-libXfixes 5.0_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-fixesproto 5.0_0 exists in the ports tree :debug:main xorg-fixesproto 5.0_0 is the latest installed :debug:main xorg-fixesproto 5.0_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-fixesproto :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main only one arch supported, so not adding the default universal variant :debug:main No need to upgrade! xorg-fixesproto 5.0_0 >= xorg-fixesproto 5.0_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libXinerama 1.1.1_0 exists in the ports tree :debug:main xorg-libXinerama 1.1.1_0 is the latest installed :debug:main xorg-libXinerama 1.1.1_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXinerama :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! xorg-libXinerama 1.1.1_0 >= xorg-libXinerama 1.1.1_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-xineramaproto 1.2.1_0 exists in the ports tree :debug:main xorg-xineramaproto 1.2.1_0 is the latest installed :debug:main xorg-xineramaproto 1.2.1_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xineramaproto :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main only one arch supported, so not adding the default universal variant :debug:main No need to upgrade! xorg-xineramaproto 1.2.1_0 >= xorg-xineramaproto 1.2.1_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libXdamage 1.1.3_0 exists in the ports tree :debug:main xorg-libXdamage 1.1.3_0 is the latest installed :debug:main xorg-libXdamage 1.1.3_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdamage :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! xorg-libXdamage 1.1.3_0 >= xorg-libXdamage 1.1.3_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-damageproto 1.2.1_0 exists in the ports tree :debug:main xorg-damageproto 1.2.1_0 is the latest installed :debug:main xorg-damageproto 1.2.1_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-damageproto :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main only one arch supported, so not adding the default universal variant :debug:main No need to upgrade! xorg-damageproto 1.2.1_0 >= xorg-damageproto 1.2.1_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libXcomposite 0.4.3_0 exists in the ports tree :debug:main xorg-libXcomposite 0.4.3_0 is the latest installed :debug:main xorg-libXcomposite 0.4.3_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXcomposite :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! xorg-libXcomposite 0.4.3_0 >= xorg-libXcomposite 0.4.3_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-compositeproto 0.4.2_0 exists in the ports tree :debug:main xorg-compositeproto 0.4.2_0 is the latest installed :debug:main xorg-compositeproto 0.4.2_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-compositeproto :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main only one arch supported, so not adding the default universal variant :debug:main No need to upgrade! xorg-compositeproto 0.4.2_0 >= xorg-compositeproto 0.4.2_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main shared-mime-info 0.91_0 exists in the ports tree :debug:main shared-mime-info 0.91_0 is the latest installed :debug:main shared-mime-info 0.91_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/shared-mime-info :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! shared-mime-info 0.91_0 >= shared-mime-info 0.91_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main hicolor-icon-theme 0.12_0 exists in the ports tree :debug:main hicolor-icon-theme 0.12_0 is the latest installed :debug:main hicolor-icon-theme 0.12_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/hicolor-icon-theme :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main only one arch supported, so not adding the default universal variant :debug:main No need to upgrade! hicolor-icon-theme 0.12_0 >= hicolor-icon-theme 0.12_0 :msg:main ---> Computing dependencies for libglade2:info:main .:debug:main Searching for dependency: pkgconfig :debug:main Found Dependency: receipt exists for pkgconfig :debug:main Searching for dependency: gettext :debug:main Found Dependency: receipt exists for gettext :debug:main Searching for dependency: fontconfig :debug:main Found Dependency: receipt exists for fontconfig :debug:main Searching for dependency: libxml2 :debug:main Found Dependency: receipt exists for libxml2 :debug:main Searching for dependency: gtk2 :debug:main Found Dependency: receipt exists for gtk2 :msg:main :debug:main Executing org.macports.main (libglade2) :debug:main changing euid/egid - current euid: 0 - current egid: 0 :debug:main egid changed to: 501 :debug:main euid changed to: 502 :debug:archivefetch archivefetch phase started at Sat Nov 26 20:29:02 CET 2011 :msg:archivefetch ---> Fetching archive for libglade2 :debug:archivefetch Executing org.macports.archivefetch (libglade2) :debug:archivefetch euid/egid changed to: 0/0 :debug:archivefetch chowned /opt/local/var/macports/software/libglade2 to macports :debug:archivefetch euid/egid changed to: 502/501 :debug:archivefetch euid/egid changed to: 0/0 :debug:archivefetch chowned /opt/local/var/macports/incoming to macports :debug:archivefetch euid/egid changed to: 502/501 :info:archivefetch ---> libglade2-2.6.4_4.darwin_11.x86_64.tbz2 doesn't seem to exist in /opt/local/var/macports/software/libglade2 :msg:archivefetch ---> Attempting to fetch libglade2-2.6.4_4.darwin_11.x86_64.tbz2 from http://packages.macports.org/libglade2 :debug:archivefetch Fetching archive failed:: The requested URL returned error: 404 :debug:archivefetch Privilege de-escalation not attempted as not running as root. :debug:fetch fetch phase started at Sat Nov 26 20:29:03 CET 2011 :notice:fetch ---> Fetching libglade2 :debug:fetch Can't run fetch on this port without elevated privileges. Escalating privileges back to root. :debug:fetch euid changed to: 0. egid changed to: 0. :debug:fetch changing euid/egid - current euid: 0 - current egid: 0 :debug:fetch egid changed to: 501 :debug:fetch euid changed to: 502 :debug:fetch Executing org.macports.fetch (libglade2) :info:fetch ---> libglade-2.6.4.tar.bz2 doesn't seem to exist in /opt/local/var/macports/distfiles/libglade2 :debug:fetch Pinging ftp.cse.buffalo.edu... :debug:fetch Pinging www.gtlib.cc.gatech.edu... :debug:fetch Pinging fr2.rpmfind.net... :debug:fetch Pinging mirror.aarnet.edu.au... :debug:fetch Pinging ftp.unina.it... :debug:fetch Pinging ftp.acc.umu.se... :debug:fetch Pinging ftp.belnet.be... :debug:fetch Pinging ftp.nara.wide.ad.jp... :debug:fetch Pinging ftp.dit.upm.es... :debug:fetch Pinging ftp.no.gnome.org... :debug:fetch Pinging ftp.kddlabs.co.jp... :debug:fetch Pinging mirror.internode.on.net... :debug:fetch Pinging ftp.df.lth.se... :debug:fetch Pinging linorg.usp.br... :debug:fetch Pinging ftp.gnome.org... :debug:fetch Pinging distfiles.macports.org... :debug:fetch Pinging aarnet.au.distfiles.macports.org... :debug:fetch Pinging her.gr.distfiles.macports.org... :debug:fetch Pinging jog.id.distfiles.macports.org... :debug:fetch Pinging lil.fr.distfiles.macports.org... :debug:fetch Pinging sea.us.distfiles.macports.org... :debug:fetch Pinging ykf.ca.distfiles.macports.org... :debug:fetch ftp.cse.buffalo.edu ping time is 128.395 :debug:fetch www.gtlib.cc.gatech.edu ping time is 10000 :debug:fetch fr2.rpmfind.net ping time is 10000 :debug:fetch mirror.aarnet.edu.au ping time is 362.220 :debug:fetch ftp.unina.it ping time is 55.344 :debug:fetch ftp.acc.umu.se ping time is 71.230 :debug:fetch ftp.belnet.be ping time is 47.567 :debug:fetch ftp.nara.wide.ad.jp ping time is 328.005 :debug:fetch ftp.dit.upm.es ping time is 70.004 :debug:fetch ftp.no.gnome.org ping time is 10000 :debug:fetch ftp.kddlabs.co.jp ping time is 10000 :debug:fetch mirror.internode.on.net ping time is 360.406 :debug:fetch ftp.df.lth.se ping time is 75.800 :debug:fetch linorg.usp.br ping time is 256.788 :debug:fetch ftp.gnome.org ping time is 72.995 :debug:fetch distfiles.macports.org ping time is 187.803 :debug:fetch aarnet.au.distfiles.macports.org ping time is 362.248 :debug:fetch her.gr.distfiles.macports.org ping time is 101.743 :debug:fetch jog.id.distfiles.macports.org ping time is 319.232 :debug:fetch lil.fr.distfiles.macports.org ping time is 38.202 :debug:fetch sea.us.distfiles.macports.org ping time is 10000 :debug:fetch ykf.ca.distfiles.macports.org ping time is 265.304 :notice:fetch ---> Attempting to fetch libglade-2.6.4.tar.bz2 from http://lil.fr.distfiles.macports.org/libglade2 :debug:fetch Privilege de-escalation not attempted as not running as root. :debug:checksum checksum phase started at Sat Nov 26 20:29:07 CET 2011 :notice:checksum ---> Verifying checksum(s) for libglade2 :debug:checksum Executing org.macports.checksum (libglade2) :info:checksum ---> Checksumming libglade-2.6.4.tar.bz2 :debug:checksum Correct (md5) checksum for libglade-2.6.4.tar.bz2 :debug:checksum Correct (sha1) checksum for libglade-2.6.4.tar.bz2 :debug:checksum Correct (rmd160) checksum for libglade-2.6.4.tar.bz2 :debug:checksum Privilege de-escalation not attempted as not running as root. :debug:extract extract phase started at Sat Nov 26 20:29:07 CET 2011 :notice:extract ---> Extracting libglade2 :debug:extract setting option extract.cmd to /usr/bin/bzip2 :debug:extract Executing org.macports.extract (libglade2) :info:extract ---> Extracting libglade-2.6.4.tar.bz2 :debug:extract setting option extract.args to '/opt/local/var/macports/distfiles/libglade2/libglade-2.6.4.tar.bz2' :debug:extract Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_libglade2/libglade2/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.7' :debug:extract Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_libglade2/libglade2/work" && /usr/bin/bzip2 -dc '/opt/local/var/macports/distfiles/libglade2/libglade-2.6.4.tar.bz2' | /usr/bin/gnutar --no-same-owner -xf -' :debug:extract Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_libglade2/libglade2/work" && /usr/bin/bzip2 -dc '/opt/local/var/macports/distfiles/libglade2/libglade-2.6.4.tar.bz2' | /usr/bin/gnutar --no-same-owner -xf - :debug:extract euid/egid changed to: 0/0 :debug:extract chowned /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_libglade2/libglade2/work to macports :debug:extract euid/egid changed to: 502/501 :debug:extract Privilege de-escalation not attempted as not running as root. :debug:patch patch phase started at Sat Nov 26 20:29:07 CET 2011 :debug:patch Executing org.macports.patch (libglade2) :debug:patch Executing proc-post-org.macports.patch-patch-0 :debug:patch euid/egid changed to: 0/0 :debug:patch chowned /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_libglade2/libglade2/work/libglade-2.6.4/Makefile.in to macports :debug:patch euid/egid changed to: 502/501 :debug:patch euid/egid changed to: 0/0 :debug:patch setting attributes on /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_libglade2/libglade2/work/libglade-2.6.4/Makefile.in :debug:patch euid/egid changed to: 502/501 :debug:patch Privilege de-escalation not attempted as not running as root. :debug:configure configure phase started at Sat Nov 26 20:29:07 CET 2011 :notice:configure ---> Configuring libglade2 :debug:configure Using compiler 'Mac OS X llvm-gcc 4.2' :debug:configure Executing org.macports.configure (libglade2) :debug:configure Environment: CPATH='/opt/local/include' CFLAGS='-pipe -O2 -arch x86_64' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-pipe -O2 -arch x86_64' LIBRARY_PATH='/opt/local/lib' MACOSX_DEPLOYMENT_TARGET='10.7' CXX='/Developer/usr/bin/llvm-g++-4.2' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_libglade2/libglade2/work/.CC_PRINT_OPTIONS' F90FLAGS='-pipe -O2 -m64' LDFLAGS='-L/opt/local/lib -arch x86_64' OBJC='/Developer/usr/bin/llvm-gcc-4.2' FCFLAGS='-pipe -O2 -m64' INSTALL='/usr/bin/install -c' OBJCFLAGS='-pipe -O2 -arch x86_64' FFLAGS='-pipe -O2 -m64' CC_PRINT_OPTIONS='YES' CC='/Developer/usr/bin/llvm-gcc-4.2' :debug:configure Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_libglade2/libglade2/work/libglade-2.6.4" && ./configure --prefix=/opt/local --disable-gtktest --with-xml-catalog=/opt/local/etc/xml/catalog' :debug:configure Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_libglade2/libglade2/work/libglade-2.6.4" && ./configure --prefix=/opt/local --disable-gtktest --with-xml-catalog=/opt/local/etc/xml/catalog :info:configure checking for a BSD-compatible install... /usr/bin/install -c :info:configure checking whether build environment is sane... yes :info:configure checking for a thread-safe mkdir -p... ./install-sh -c -d :info:configure checking for gawk... gawk :info:configure checking whether make sets $(MAKE)... yes :info:configure checking for gcc... /Developer/usr/bin/llvm-gcc-4.2 :info:configure checking for C compiler default output file name... a.out :info:configure checking whether the C compiler works... yes :info:configure checking whether we are cross compiling... no :info:configure checking for suffix of executables... :info:configure checking for suffix of object files... o :info:configure checking whether we are using the GNU C compiler... yes :info:configure checking whether /Developer/usr/bin/llvm-gcc-4.2 accepts -g... yes :info:configure checking for /Developer/usr/bin/llvm-gcc-4.2 option to accept ISO C89... none needed :info:configure checking for style of include used by make... GNU :info:configure checking dependency style of /Developer/usr/bin/llvm-gcc-4.2... gcc3 :info:configure checking for library containing strerror... none required :info:configure checking how to run the C preprocessor... /Developer/usr/bin/llvm-gcc-4.2 -E :info:configure checking for grep that handles long lines and -e... /usr/bin/grep :info:configure checking for egrep... /usr/bin/grep -E :info:configure checking for ANSI C header files... yes :info:configure checking build system type... i386-apple-darwin11.2.0 :info:configure checking host system type... i386-apple-darwin11.2.0 :info:configure checking for a sed that does not truncate output... /opt/local/bin/gsed :info:configure checking for ld used by /Developer/usr/bin/llvm-gcc-4.2... /Developer/usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld :info:configure checking if the linker (/Developer/usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld) is GNU ld... no :info:configure checking for /Developer/usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld option to reload object files... -r :info:configure checking for BSD-compatible nm... /usr/bin/nm :info:configure checking whether ln -s works... yes :info:configure checking how to recognize dependent libraries... pass_all :info:configure checking for sys/types.h... yes :info:configure checking for sys/stat.h... yes :info:configure checking for stdlib.h... yes :info:configure checking for string.h... yes :info:configure checking for memory.h... yes :info:configure checking for strings.h... yes :info:configure checking for inttypes.h... yes :info:configure checking for stdint.h... yes :info:configure checking for unistd.h... yes :info:configure checking dlfcn.h usability... yes :info:configure checking dlfcn.h presence... yes :info:configure checking for dlfcn.h... yes :info:configure checking the maximum length of command line arguments... 196608 :info:configure checking command to parse /usr/bin/nm output from /Developer/usr/bin/llvm-gcc-4.2 object... ok :info:configure checking for objdir... .libs :info:configure checking for ar... ar :info:configure checking for ranlib... ranlib :info:configure checking for strip... strip :info:configure checking for dsymutil... dsymutil :info:configure checking for nmedit... nmedit :info:configure checking for -single_module linker flag... yes :info:configure checking for -exported_symbols_list linker flag... yes :info:configure checking if /Developer/usr/bin/llvm-gcc-4.2 supports -fno-rtti -fno-exceptions... no :info:configure checking for /Developer/usr/bin/llvm-gcc-4.2 option to produce PIC... -fno-common :info:configure checking if /Developer/usr/bin/llvm-gcc-4.2 PIC flag -fno-common works... yes :info:configure checking if /Developer/usr/bin/llvm-gcc-4.2 static flag -static works... no :info:configure checking if /Developer/usr/bin/llvm-gcc-4.2 supports -c -o file.o... yes :info:configure checking whether the /Developer/usr/bin/llvm-gcc-4.2 linker (/Developer/usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin11/4.2.1/ld) supports shared libraries... yes :info:configure checking dynamic linker characteristics... darwin11.2.0 dyld :info:configure checking how to hardcode library paths into programs... immediate :info:configure checking whether stripping libraries is possible... yes :info:configure checking if libtool supports shared libraries... yes :info:configure checking whether to build shared libraries... yes :info:configure checking whether to build static libraries... yes :info:configure configure: creating libtool :info:configure checking for pkg-config... /opt/local/bin/pkg-config :info:configure checking for GTK+ - version >= 2.5.0... yes (version 2.24.8) :info:configure checking for gtk_plug_get_type... yes :info:configure checking pkg-config is at least version 0.9.0... yes :info:configure checking for LIBGLADE... yes :info:configure checking for native Win32... no :info:configure checking for Win32 platform in general... no :info:configure checking whether to build gtk-doc documentation... no :info:configure checking for gtkdoc-check... /opt/local/bin/gtkdoc-check :info:configure checking for gtkdoc-rebase... /opt/local/bin/gtkdoc-rebase :info:configure checking locale.h usability... yes :info:configure checking locale.h presence... yes :info:configure checking for locale.h... yes :info:configure checking for LC_MESSAGES... yes :info:configure checking libintl.h usability... yes :info:configure checking libintl.h presence... yes :info:configure checking for libintl.h... yes :info:configure checking for ngettext in libc... no :info:configure checking for bindtextdomain in -lintl... yes :info:configure checking for ngettext in -lintl... yes :info:configure checking for dgettext in -lintl... yes :info:configure checking for bind_textdomain_codeset... yes :info:configure checking for msgfmt... /opt/local/bin/msgfmt :info:configure checking for dcgettext... yes :info:configure checking if msgfmt accepts -c... yes :info:configure checking for gmsgfmt... /opt/local/bin/msgfmt :info:configure checking for xgettext... /opt/local/bin/xgettext :info:configure ./configure: line 13043: ./po/POTFILES.in: No such file or directory :info:configure checking for a Python interpreter with version >= 2.0... python :info:configure checking for python... /usr/bin/python :info:configure checking for python version... 2.7 :info:configure checking for python platform... darwin :info:configure checking for python script directory... ${prefix}/lib/python2.7/site-packages :info:configure checking for python extension module directory... ${exec_prefix}/lib/python2.7/site-packages :info:configure checking for the Python module xml.parsers.expat... yes :info:configure checking for XML catalog (/opt/local/etc/xml/catalog)... found :info:configure checking for xmlcatalog... /opt/local/bin/xmlcatalog :info:configure configure: creating ./config.status :info:configure config.status: creating Makefile :info:configure config.status: creating libglade.spec :info:configure config.status: creating libglade-zip :info:configure config.status: creating glade/Makefile :info:configure config.status: creating doc/Makefile :info:configure config.status: creating doc/version.xml :info:configure config.status: creating tests/Makefile :info:configure config.status: creating libglade-2.0.pc :info:configure config.status: creating libglade-2.0-uninstalled.pc :info:configure config.status: creating libglade-convert :info:configure config.status: creating config.h :info:configure config.status: executing depfiles commands :info:configure config.status: executing default-1 commands :debug:configure Privilege de-escalation not attempted as not running as root. :debug:build build phase started at Sat Nov 26 20:29:14 CET 2011 :notice:build ---> Building libglade2 :debug:build Executing org.macports.build (libglade2) :debug:build Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_libglade2/libglade2/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.7' :debug:build Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_libglade2/libglade2/work/libglade-2.6.4" && /usr/bin/make -j2 -w all' :debug:build Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_libglade2/libglade2/work/libglade-2.6.4" && /usr/bin/make -j2 -w all :info:build make: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_libglade2/libglade2/work/libglade-2.6.4' :info:build /usr/bin/make all-recursive :info:build make[1]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_libglade2/libglade2/work/libglade-2.6.4' :info:build Making all in glade :info:build make[2]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_libglade2/libglade2/work/libglade-2.6.4/glade' :info:build /bin/sh ../libtool --tag=CC --mode=compile /Developer/usr/bin/llvm-gcc-4.2 -DHAVE_CONFIG_H -I. -I.. -DG_LOG_DOMAIN=\"libglade\" -I.. -D_REENTRANT -I/opt/local/include/libxml2 -I/opt/local/include/atk-1.0 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/gtk-2.0 -I/opt/local/lib/gtk-2.0/include -I/opt/local/include/cairo -I/opt/local/include/gdk-pixbuf-2.0 -I/opt/local/include/pango-1.0 -I/opt/local/include/gio-unix-2.0/ -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng14 -DGLADE_LIBDIR=\""/opt/local/lib"\" -DGLADE_PREFIX=\""/opt/local"\" -DG_DISABLE_DEPRECATED -DGDK_DISABLE_DEPRECATED -DGDK_PIXBUF_DISABLE_DEPRECATED -DGNOME_DISABLE_DEPRECATED -I/opt/local/include -pipe -O2 -arch x86_64 -Wall -std=c9x -MT glade-init.lo -MD -MP -MF .deps/glade-init.Tpo -c -o glade-init.lo glade-init.c :info:build /bin/sh ../libtool --tag=CC --mode=compile /Developer/usr/bin/llvm-gcc-4.2 -DHAVE_CONFIG_H -I. -I.. -DG_LOG_DOMAIN=\"libglade\" -I.. -D_REENTRANT -I/opt/local/include/libxml2 -I/opt/local/include/atk-1.0 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/gtk-2.0 -I/opt/local/lib/gtk-2.0/include -I/opt/local/include/cairo -I/opt/local/include/gdk-pixbuf-2.0 -I/opt/local/include/pango-1.0 -I/opt/local/include/gio-unix-2.0/ -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng14 -DGLADE_LIBDIR=\""/opt/local/lib"\" -DGLADE_PREFIX=\""/opt/local"\" -DG_DISABLE_DEPRECATED -DGDK_DISABLE_DEPRECATED -DGDK_PIXBUF_DISABLE_DEPRECATED -DGNOME_DISABLE_DEPRECATED -I/opt/local/include -pipe -O2 -arch x86_64 -Wall -std=c9x -MT glade-xml.lo -MD -MP -MF .deps/glade-xml.Tpo -c -o glade-xml.lo glade-xml.c :info:build mkdir .libs :info:build /Developer/usr/bin/llvm-gcc-4.2 -DHAVE_CONFIG_H -I. -I.. -DG_LOG_DOMAIN=\"libglade\" -I.. -D_REENTRANT -I/opt/local/include/libxml2 -I/opt/local/include/atk-1.0 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/gtk-2.0 -I/opt/local/lib/gtk-2.0/include -I/opt/local/include/cairo -I/opt/local/include/gdk-pixbuf-2.0 -I/opt/local/include/pango-1.0 -I/opt/local/include/gio-unix-2.0/ -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng14 -DGLADE_LIBDIR=\"/opt/local/lib\" -DGLADE_PREFIX=\"/opt/local\" -DG_DISABLE_DEPRECATED -DGDK_DISABLE_DEPRECATED -DGDK_PIXBUF_DISABLE_DEPRECATED -DGNOME_DISABLE_DEPRECATED -I/opt/local/include -pipe -O2 -arch x86_64 -Wall -std=c9x -MT glade-xml.lo -MD -MP -MF .deps/glade-xml.Tpo -c glade-xml.c -fno-common -DPIC -o .libs/glade-xml.o :info:build /Developer/usr/bin/llvm-gcc-4.2 -DHAVE_CONFIG_H -I. -I.. -DG_LOG_DOMAIN=\"libglade\" -I.. -D_REENTRANT -I/opt/local/include/libxml2 -I/opt/local/include/atk-1.0 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/gtk-2.0 -I/opt/local/lib/gtk-2.0/include -I/opt/local/include/cairo -I/opt/local/include/gdk-pixbuf-2.0 -I/opt/local/include/pango-1.0 -I/opt/local/include/gio-unix-2.0/ -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng14 -DGLADE_LIBDIR=\"/opt/local/lib\" -DGLADE_PREFIX=\"/opt/local\" -DG_DISABLE_DEPRECATED -DGDK_DISABLE_DEPRECATED -DGDK_PIXBUF_DISABLE_DEPRECATED -DGNOME_DISABLE_DEPRECATED -I/opt/local/include -pipe -O2 -arch x86_64 -Wall -std=c9x -MT glade-init.lo -MD -MP -MF .deps/glade-init.Tpo -c glade-init.c -fno-common -DPIC -o .libs/glade-init.o :info:build In file included from /opt/local/include/gdk-pixbuf-2.0/gdk-pixbuf/gdk-pixbuf.h:35, :info:build from /opt/local/include/gtk-2.0/gdk/gdkpixbuf.h:37, :info:build from /opt/local/include/gtk-2.0/gdk/gdkcairo.h:28, :info:build from /opt/local/include/gtk-2.0/gdk/gdk.h:33, :info:build from /opt/local/include/gtk-2.0/gtk/gtk.h:32, :info:build from ../glade/glade-xml.h:26, :info:build from glade-build.h:28, :info:build from glade-init.c:33: :info:build /opt/local/include/gdk-pixbuf-2.0/gdk-pixbuf/gdk-pixbuf-core.h:260: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’ :info:build In file included from /opt/local/include/gdk-pixbuf-2.0/gdk-pixbuf/gdk-pixbuf.h:35, :info:build from /opt/local/include/gtk-2.0/gdk/gdkpixbuf.h:37, :info:build from /opt/local/include/gtk-2.0/gdk/gdkcairo.h:28, :info:build from /opt/local/include/gtk-2.0/gdk/gdk.h:33, :info:build from /opt/local/include/gtk-2.0/gtk/gtk.h:32, :info:build from ../glade/glade-xml.h:26, :info:build from glade-xml.c:28: :info:build /opt/local/include/gdk-pixbuf-2.0/gdk-pixbuf/gdk-pixbuf-core.h:260: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’ :info:build make[2]: *** [glade-init.lo] Error 1 :info:build make[2]: *** Waiting for unfinished jobs.... :info:build make[2]: *** [glade-xml.lo] Error 1 :info:build make[2]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_libglade2/libglade2/work/libglade-2.6.4/glade' :info:build make[1]: *** [all-recursive] Error 1 :info:build make[1]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_libglade2/libglade2/work/libglade-2.6.4' :info:build make: *** [all] Error 2 :info:build make: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_libglade2/libglade2/work/libglade-2.6.4' :info:build shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_libglade2/libglade2/work/libglade-2.6.4" && /usr/bin/make -j2 -w all " returned error 2 :error:build Target org.macports.build returned: shell command failed (see log for details) :debug:build Backtrace: shell command failed (see log for details) while executing "command_exec build" (procedure "portbuild::build_main" line 8) invoked from within "$procedure $targetname" :info:build Warning: the following items did not execute (for libglade2): org.macports.activate org.macports.build org.macports.destroot org.macports.install :notice:build Log for libglade2 is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_libglade2/libglade2/main.log