Context Navigation

← Previous Ticket
Next Ticket →

#23312 closed defect (invalid)

Unable to detect PHP version

Reported by:	jkorchok@…	Owned by:	macports-tickets@…
Priority:	Normal	Milestone:
Component:	ports	Version:	1.8.2
Keywords:		Cc:	ryandesign (Ryan Carsten Schmidt)
Port:	php5-oracle

Description (last modified by ryandesign (Ryan Carsten Schmidt))

I am getting the following when attempting to upgrade php5-oracle:

sudo port upgrade php5-oracle 
Password:
--->  Computing dependencies for php5-oracle
--->  Configuring php5-oracle
Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_php_php5-oracle/work/php-5.3.1/ext/oci8" && ./configure --prefix=/opt/local --with-oci8=instantclient,/opt/local/lib/oracle --with-pdo-oci=instantclient,/opt/local/lib/oracle,10.1 " returned error 1
Command output: checking for re2c... no
configure: WARNING: You will need re2c 0.13.4 or later if you want to regenerate PHP parsers.
checking for gawk... gawk
checking for Oracle (OCI8) support... yes, shared
checking PHP version... Unknown option: n
Usage: head [-options] <url>...
    -m <method>   use method for the request (default is 'HEAD')
    -f            make request even if head believes method is illegal
    -b <base>     Use the specified URL as base
    -t <timeout>  Set timeout value
    -i <time>     Set the If-Modified-Since header on the request
    -c <conttype> use this content-type for POST, PUT, CHECKIN
    -a            Use text mode for content I/O
    -p <proxyurl> use this as a proxy
    -P            don't load proxy settings from environment
    -H <header>   send this HTTP header (you can specify several)

    -u            Display method and URL before any response
    -U            Display request headers (implies -u)
    -s            Display response status code
    -S            Display response status chain
    -e            Display response headers
    -d            Do not display content
    -o <format>   Process HTML content in various ways

    -v            Show program version
    -h            Print this message

    -x            Extra debugging output
configure: error: failed to detect PHP version, please report

Error: Unable to upgrade port: 1
Before reporting a bug, first run the command again with the -d flag to get complete output.

I previously ran

port clean php5-oracle

but it didn't help.

I ran

sudo port uninstall php5-oracle

then

sudo port install php5-oracle

and got the same error message.

When I run

sudo port -d install php5-oracle

I get the following:

DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/php/php5-oracle
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/php/php5-oracle
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/php5extension-1.0.tcl
DEBUG: Re-registering default for build.dir
DEBUG: Re-registering default for configure.dir
DEBUG: Re-registering default for destroot.dir
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port php5-oracle.
DEBUG: Requested variant darwin is not provided by port php5-oracle.
DEBUG: Requested variant macosx is not provided by port php5-oracle.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/php5
DEBUG: epoch: in tree: 1 installed: 1
DEBUG: php5 5.3.1_1 exists in the ports tree
DEBUG: php5 5.3.1_1 +apache2+macosx+mysql5+oracle is the latest installed
DEBUG: php5 5.3.1_1 +apache2+macosx+mysql5+oracle is active
DEBUG: Merging existing variants apache2 macosx mysql5 oracle into variants
DEBUG: new fully merged portvariants: apache2 + oracle + mysql5 +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/php5
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant powerpc is not provided by port php5.
DEBUG: Requested variant darwin is not provided by port php5.
DEBUG: Executing variant macosx provides macosx
DEBUG: Executing variant apache2 provides apache2
DEBUG: Executing variant mysql5 provides mysql5
DEBUG: Executing variant oracle provides oracle
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: pkgconfig 0.23_1 exists in the ports tree
DEBUG: pkgconfig 0.23_1  is the latest installed
DEBUG: pkgconfig 0.23_1  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port pkgconfig.
DEBUG: Requested variant darwin is not provided by port pkgconfig.
DEBUG: Requested variant macosx is not provided by port pkgconfig.
DEBUG: No need to upgrade! pkgconfig 0.23_1 >= pkgconfig 0.23_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf213
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: autoconf213 2.13_1 exists in the ports tree
DEBUG: autoconf213 2.13_1  is the latest installed
DEBUG: autoconf213 2.13_1  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf213
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant powerpc is not provided by port autoconf213.
DEBUG: Requested variant darwin is not provided by port autoconf213.
DEBUG: Requested variant macosx is not provided by port autoconf213.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
DEBUG: perl5 is *not* installed by MacPorts
DEBUG: Searching for dependency: perl5
DEBUG: Didn't find receipt, going to depspec regex for: perl5
DEBUG: Found Dependency: path: /opt/local/bin filename: perl regex: ^perl$
DEBUG: perl5 not installed, soft dependency satisfied
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: m4 1.4.13_0 exists in the ports tree
DEBUG: m4 1.4.13_0  is the latest installed
DEBUG: m4 1.4.13_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port m4.
DEBUG: Requested variant darwin is not provided by port m4.
DEBUG: Requested variant macosx is not provided by port m4.
DEBUG: No need to upgrade! m4 1.4.13_0 >= m4 1.4.13_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/gawk
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gawk 3.1.7_0 exists in the ports tree
DEBUG: gawk 3.1.7_0  is the latest installed
DEBUG: gawk 3.1.7_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/gawk
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port gawk.
DEBUG: Requested variant darwin is not provided by port gawk.
DEBUG: Requested variant macosx is not provided by port gawk.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libiconv 1.13_0 exists in the ports tree
DEBUG: libiconv 1.13_0  is the latest installed
DEBUG: libiconv 1.13_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant powerpc is not provided by port libiconv.
DEBUG: Requested variant darwin is not provided by port libiconv.
DEBUG: Requested variant macosx is not provided by port libiconv.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gperf 3.0.4_0 exists in the ports tree
DEBUG: gperf 3.0.4_0  is the latest installed
DEBUG: gperf 3.0.4_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant powerpc is not provided by port gperf.
DEBUG: Requested variant darwin is not provided by port gperf.
DEBUG: Requested variant macosx is not provided by port gperf.
DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0
DEBUG: No need to upgrade! libiconv 1.13_0 >= libiconv 1.13_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gettext 0.17_4 exists in the ports tree
DEBUG: gettext 0.17_4  is the latest installed
DEBUG: gettext 0.17_4  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant powerpc is not provided by port gettext.
DEBUG: Requested variant darwin is not provided by port gettext.
DEBUG: Requested variant macosx is not provided by port gettext.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncurses 5.7_0 exists in the ports tree
DEBUG: ncurses 5.7_0  is the latest installed
DEBUG: ncurses 5.7_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant powerpc is not provided by port ncurses.
DEBUG: Requested variant darwin is not provided by port ncurses.
DEBUG: Requested variant macosx is not provided by port ncurses.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncursesw 5.7_0 exists in the ports tree
DEBUG: ncursesw 5.7_0  is the latest installed
DEBUG: ncursesw 5.7_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant powerpc is not provided by port ncursesw.
DEBUG: Requested variant darwin is not provided by port ncursesw.
DEBUG: Requested variant macosx is not provided by port ncursesw.
DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: expat 2.0.1_0 exists in the ports tree
DEBUG: expat 2.0.1_0  is the latest installed
DEBUG: expat 2.0.1_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port expat.
DEBUG: Requested variant darwin is not provided by port expat.
DEBUG: Requested variant macosx is not provided by port expat.
DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4
DEBUG: No need to upgrade! gawk 3.1.7_0 >= gawk 3.1.7_0
DEBUG: No need to upgrade! autoconf213 2.13_1 >= autoconf213 2.13_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/gsed
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gsed 4.2.1_0 exists in the ports tree
DEBUG: gsed 4.2.1_0 +darwin_8 is the latest installed
DEBUG: gsed 4.2.1_0 +darwin_8 is active
DEBUG: Merging existing variants darwin_8 into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/gsed
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant powerpc is not provided by port gsed.
DEBUG: Requested variant darwin is not provided by port gsed.
DEBUG: Requested variant macosx is not provided by port gsed.
DEBUG: Executing variant darwin_8 provides darwin_8
DEBUG: No need to upgrade! gsed 4.2.1_0 >= gsed 4.2.1_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libtool 2.2.6b_0 exists in the ports tree
DEBUG: libtool 2.2.6b_0  is the latest installed
DEBUG: libtool 2.2.6b_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port libtool.
DEBUG: Requested variant darwin is not provided by port libtool.
DEBUG: Requested variant macosx is not provided by port libtool.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: automake 1.11.1_0 exists in the ports tree
DEBUG: automake 1.11.1_0  is the latest installed
DEBUG: automake 1.11.1_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port automake.
DEBUG: Requested variant darwin is not provided by port automake.
DEBUG: Requested variant macosx is not provided by port automake.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: autoconf 2.65_0 exists in the ports tree
DEBUG: autoconf 2.65_0  is the latest installed
DEBUG: autoconf 2.65_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant powerpc is not provided by port autoconf.
DEBUG: Requested variant darwin is not provided by port autoconf.
DEBUG: Requested variant macosx is not provided by port autoconf.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: help2man 1.37.1_1 exists in the ports tree
DEBUG: help2man 1.37.1_1  is the latest installed
DEBUG: help2man 1.37.1_1  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port help2man.
DEBUG: Requested variant darwin is not provided by port help2man.
DEBUG: Requested variant macosx is not provided by port help2man.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: p5-locale-gettext 1.05_2 exists in the ports tree
DEBUG: p5-locale-gettext 1.05_2  is the latest installed
DEBUG: p5-locale-gettext 1.05_2  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant powerpc is not provided by port p5-locale-gettext.
DEBUG: Requested variant darwin is not provided by port p5-locale-gettext.
DEBUG: Requested variant macosx is not provided by port p5-locale-gettext.
DEBUG: No need to upgrade! p5-locale-gettext 1.05_2 >= p5-locale-gettext 1.05_2
DEBUG: No need to upgrade! help2man 1.37.1_1 >= help2man 1.37.1_1
DEBUG: No need to upgrade! autoconf 2.65_0 >= autoconf 2.65_0
DEBUG: No need to upgrade! automake 1.11.1_0 >= automake 1.11.1_0
DEBUG: No need to upgrade! libtool 2.2.6b_0 >= libtool 2.2.6b_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libxml2 2.7.6_0 exists in the ports tree
DEBUG: libxml2 2.7.6_0  is the latest installed
DEBUG: libxml2 2.7.6_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port libxml2.
DEBUG: Requested variant darwin is not provided by port libxml2.
DEBUG: Requested variant macosx is not provided by port libxml2.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: zlib 1.2.3_4 exists in the ports tree
DEBUG: zlib 1.2.3_4  is the latest installed
DEBUG: zlib 1.2.3_4  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port zlib.
DEBUG: Requested variant darwin is not provided by port zlib.
DEBUG: Requested variant macosx is not provided by port zlib.
DEBUG: No need to upgrade! zlib 1.2.3_4 >= zlib 1.2.3_4
DEBUG: No need to upgrade! libxml2 2.7.6_0 >= libxml2 2.7.6_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: bzip2 1.0.5_3 exists in the ports tree
DEBUG: bzip2 1.0.5_3 +darwin is the latest installed
DEBUG: bzip2 1.0.5_3 +darwin is active
DEBUG: Merging existing variants darwin into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant powerpc is not provided by port bzip2.
DEBUG: Requested variant macosx is not provided by port bzip2.
DEBUG: Executing variant darwin provides darwin
DEBUG: No need to upgrade! bzip2 1.0.5_3 >= bzip2 1.0.5_3
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/mhash
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: mhash 0.9.9.9_0 exists in the ports tree
DEBUG: mhash 0.9.9.9_0  is the latest installed
DEBUG: mhash 0.9.9.9_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/mhash
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port mhash.
DEBUG: Requested variant darwin is not provided by port mhash.
DEBUG: Requested variant macosx is not provided by port mhash.
DEBUG: No need to upgrade! mhash 0.9.9.9_0 >= mhash 0.9.9.9_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pcre
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: pcre 7.9_0 exists in the ports tree
DEBUG: pcre 7.9_0  is the latest installed
DEBUG: pcre 7.9_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pcre
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant powerpc is not provided by port pcre.
DEBUG: Requested variant darwin is not provided by port pcre.
DEBUG: Requested variant macosx is not provided by port pcre.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: readline 6.1.000_1 exists in the ports tree
DEBUG: readline 6.1.000_1 +darwin is the latest installed
DEBUG: readline 6.1.000_1 +darwin is active
DEBUG: Merging existing variants darwin into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant powerpc is not provided by port readline.
DEBUG: Requested variant macosx is not provided by port readline.
DEBUG: Executing variant darwin provides darwin
DEBUG: No need to upgrade! readline 6.1.000_1 >= readline 6.1.000_1
DEBUG: No need to upgrade! pcre 7.9_0 >= pcre 7.9_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/www/apache2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: apache2 2.2.14_0 exists in the ports tree
DEBUG: apache2 2.2.14_0 +darwin+preforkmpm is the latest installed
DEBUG: apache2 2.2.14_0 +darwin+preforkmpm is active
DEBUG: Merging existing variants darwin preforkmpm into variants
DEBUG: new fully merged portvariants: preforkmpm +
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/www/apache2
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant powerpc is not provided by port apache2.
DEBUG: Requested variant macosx is not provided by port apache2.
DEBUG: Executing variant darwin provides darwin
DEBUG: Executing variant preforkmpm provides preforkmpm
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/apr
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: apr 1.3.9_1 exists in the ports tree
DEBUG: apr 1.3.9_1  is the latest installed
DEBUG: apr 1.3.9_1  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/apr
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port apr.
DEBUG: Requested variant darwin is not provided by port apr.
DEBUG: Requested variant macosx is not provided by port apr.
DEBUG: No need to upgrade! apr 1.3.9_1 >= apr 1.3.9_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/apr-util
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: apr-util 1.3.9_0 exists in the ports tree
DEBUG: apr-util 1.3.9_0  is the latest installed
DEBUG: apr-util 1.3.9_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/apr-util
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port apr-util.
DEBUG: Requested variant darwin is not provided by port apr-util.
DEBUG: Requested variant macosx is not provided by port apr-util.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: db46 4.6.21_6 exists in the ports tree
DEBUG: db46 4.6.21_6  is the latest installed
DEBUG: db46 4.6.21_6  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant powerpc is not provided by port db46.
DEBUG: Requested variant darwin is not provided by port db46.
DEBUG: Requested variant macosx is not provided by port db46.
DEBUG: No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: sqlite3 3.6.22_0 exists in the ports tree
DEBUG: sqlite3 3.6.22_0  is the latest installed
DEBUG: sqlite3 3.6.22_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port sqlite3.
DEBUG: Requested variant darwin is not provided by port sqlite3.
DEBUG: Requested variant macosx is not provided by port sqlite3.
DEBUG: No need to upgrade! sqlite3 3.6.22_0 >= sqlite3 3.6.22_0
DEBUG: No need to upgrade! apr-util 1.3.9_0 >= apr-util 1.3.9_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
DEBUG: epoch: in tree: 1 installed: 1
DEBUG: openssl 0.9.8l_0 exists in the ports tree
DEBUG: openssl 0.9.8l_0 +darwin is the latest installed
DEBUG: openssl 0.9.8l_0 +darwin is active
DEBUG: Merging existing variants darwin into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant powerpc is not provided by port openssl.
DEBUG: Requested variant macosx is not provided by port openssl.
DEBUG: Executing variant darwin provides darwin
DEBUG: No need to upgrade! openssl 0.9.8l_0 >= openssl 0.9.8l_0
DEBUG: No need to upgrade! apache2 2.2.14_0 >= apache2 2.2.14_0
DEBUG: No need to upgrade! php5 5.3.1_1 >= php5 5.3.1_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/oracle-instantclient
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: oracle-instantclient 10.2.0.4.0_4 exists in the ports tree
DEBUG: oracle-instantclient 10.2.0.4.0_4  is the latest installed
DEBUG: oracle-instantclient 10.2.0.4.0_4  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/oracle-instantclient
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant powerpc is not provided by port oracle-instantclient.
DEBUG: Requested variant darwin is not provided by port oracle-instantclient.
DEBUG: Requested variant macosx is not provided by port oracle-instantclient.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/unzip
DEBUG: unzip is *not* installed by MacPorts
DEBUG: Searching for dependency: unzip
DEBUG: Didn't find receipt, going to depspec regex for: unzip
DEBUG: Found Dependency: path: /usr/bin filename: unzip regex: ^unzip$
DEBUG: unzip not installed, soft dependency satisfied
DEBUG: No need to upgrade! oracle-instantclient 10.2.0.4.0_4 >= oracle-instantclient 10.2.0.4.0_4
--->  Computing dependencies for php5-oracle
DEBUG: Searching for dependency: php5
DEBUG: Found Dependency: receipt exists for php5
DEBUG: Searching for dependency: oracle-instantclient
DEBUG: Found Dependency: receipt exists for oracle-instantclient
DEBUG: Executing org.macports.main (php5-oracle)
DEBUG: Skipping completed org.macports.fetch (php5-oracle)
DEBUG: Skipping completed org.macports.checksum (php5-oracle)
DEBUG: setting option extract.cmd to /usr/bin/bzip2
DEBUG: Skipping completed org.macports.extract (php5-oracle)
DEBUG: Skipping completed org.macports.patch (php5-oracle)
--->  Configuring php5-oracle
DEBUG: Using compiler 'Mac OS X gcc 4.0'
DEBUG: Executing proc-pre-org.macports.configure-configure-0
DEBUG: Generating configure script in oci8
Configuring for:
PHP Api Version:         20090626
Zend Module Api No:      20090626
Zend Extension Api No:   220090626
configure.in:150: warning: AC_CACHE_VAL(lt_prog_compiler_static_works, ...): suspicious cache-id, must contain _cv_ to be cached
../../lib/autoconf/general.m4:1998: AC_CACHE_VAL is expanded from...
../../lib/autoconf/general.m4:2019: AC_CACHE_CHECK is expanded from...
aclocal.m4:3555: AC_LIBTOOL_LINKER_OPTION is expanded from...
aclocal.m4:5493: _LT_AC_LANG_C_CONFIG is expanded from...
aclocal.m4:5492: AC_LIBTOOL_LANG_C_CONFIG is expanded from...
aclocal.m4:2972: AC_LIBTOOL_SETUP is expanded from...
aclocal.m4:2952: _AC_PROG_LIBTOOL is expanded from...
aclocal.m4:2915: AC_PROG_LIBTOOL is expanded from...
configure.in:150: the top level
configure.in:150: warning: AC_CACHE_VAL(lt_prog_compiler_pic_works, ...): suspicious cache-id, must contain _cv_ to be cached
aclocal.m4:3510: AC_LIBTOOL_COMPILER_OPTION is expanded from...
aclocal.m4:7620: AC_LIBTOOL_PROG_COMPILER_PIC is expanded from...
configure.in:150: warning: AC_CACHE_VAL(lt_prog_compiler_pic_works_CXX, ...): suspicious cache-id, must contain _cv_ to be cached
aclocal.m4:5606: _LT_AC_LANG_CXX_CONFIG is expanded from...
aclocal.m4:5605: AC_LIBTOOL_LANG_CXX_CONFIG is expanded from...
aclocal.m4:4641: _LT_AC_TAGCONFIG is expanded from...
configure.in:150: warning: AC_CACHE_VAL(lt_prog_compiler_static_works, ...): suspicious cache-id, must contain _cv_ to be cached
../../lib/autoconf/general.m4:1998: AC_CACHE_VAL is expanded from...
../../lib/autoconf/general.m4:2019: AC_CACHE_CHECK is expanded from...
aclocal.m4:3555: AC_LIBTOOL_LINKER_OPTION is expanded from...
aclocal.m4:5493: _LT_AC_LANG_C_CONFIG is expanded from...
aclocal.m4:5492: AC_LIBTOOL_LANG_C_CONFIG is expanded from...
aclocal.m4:2972: AC_LIBTOOL_SETUP is expanded from...
aclocal.m4:2952: _AC_PROG_LIBTOOL is expanded from...
aclocal.m4:2915: AC_PROG_LIBTOOL is expanded from...
configure.in:150: the top level
configure.in:150: warning: AC_CACHE_VAL(lt_prog_compiler_pic_works, ...): suspicious cache-id, must contain _cv_ to be cached
aclocal.m4:3510: AC_LIBTOOL_COMPILER_OPTION is expanded from...
aclocal.m4:7620: AC_LIBTOOL_PROG_COMPILER_PIC is expanded from...
configure.in:150: warning: AC_CACHE_VAL(lt_prog_compiler_pic_works_CXX, ...): suspicious cache-id, must contain _cv_ to be cached
aclocal.m4:5606: _LT_AC_LANG_CXX_CONFIG is expanded from...
aclocal.m4:5605: AC_LIBTOOL_LANG_CXX_CONFIG is expanded from...
aclocal.m4:4641: _LT_AC_TAGCONFIG is expanded from...
DEBUG: Generating configure script in pdo_oci
Configuring for:
PHP Api Version:         20090626
Zend Module Api No:      20090626
Zend Extension Api No:   220090626
config.m4:196: warning: AC_CACHE_VAL(pdo_inc_path, ...): suspicious cache-id, must contain _cv_ to be cached
../../lib/autoconf/general.m4:1998: AC_CACHE_VAL is expanded from...
../../lib/autoconf/general.m4:2019: AC_CACHE_CHECK is expanded from...
aclocal.m4:2738: PHP_CHECK_PDO_INCLUDES is expanded from...
config.m4:196: the top level
configure.in:150: warning: AC_CACHE_VAL(lt_prog_compiler_static_works, ...): suspicious cache-id, must contain _cv_ to be cached
aclocal.m4:3555: AC_LIBTOOL_LINKER_OPTION is expanded from...
aclocal.m4:5493: _LT_AC_LANG_C_CONFIG is expanded from...
aclocal.m4:5492: AC_LIBTOOL_LANG_C_CONFIG is expanded from...
aclocal.m4:2972: AC_LIBTOOL_SETUP is expanded from...
aclocal.m4:2952: _AC_PROG_LIBTOOL is expanded from...
aclocal.m4:2915: AC_PROG_LIBTOOL is expanded from...
configure.in:150: the top level
configure.in:150: warning: AC_CACHE_VAL(lt_prog_compiler_pic_works, ...): suspicious cache-id, must contain _cv_ to be cached
aclocal.m4:3510: AC_LIBTOOL_COMPILER_OPTION is expanded from...
aclocal.m4:7620: AC_LIBTOOL_PROG_COMPILER_PIC is expanded from...
configure.in:150: warning: AC_CACHE_VAL(lt_prog_compiler_pic_works_CXX, ...): suspicious cache-id, must contain _cv_ to be cached
aclocal.m4:5606: _LT_AC_LANG_CXX_CONFIG is expanded from...
aclocal.m4:5605: AC_LIBTOOL_LANG_CXX_CONFIG is expanded from...
aclocal.m4:4641: _LT_AC_TAGCONFIG is expanded from...
config.m4:196: warning: AC_CACHE_VAL(pdo_inc_path, ...): suspicious cache-id, must contain _cv_ to be cached
../../lib/autoconf/general.m4:1998: AC_CACHE_VAL is expanded from...
../../lib/autoconf/general.m4:2019: AC_CACHE_CHECK is expanded from...
aclocal.m4:2738: PHP_CHECK_PDO_INCLUDES is expanded from...
config.m4:196: the top level
configure.in:150: warning: AC_CACHE_VAL(lt_prog_compiler_static_works, ...): suspicious cache-id, must contain _cv_ to be cached
aclocal.m4:3555: AC_LIBTOOL_LINKER_OPTION is expanded from...
aclocal.m4:5493: _LT_AC_LANG_C_CONFIG is expanded from...
aclocal.m4:5492: AC_LIBTOOL_LANG_C_CONFIG is expanded from...
aclocal.m4:2972: AC_LIBTOOL_SETUP is expanded from...
aclocal.m4:2952: _AC_PROG_LIBTOOL is expanded from...
aclocal.m4:2915: AC_PROG_LIBTOOL is expanded from...
configure.in:150: the top level
configure.in:150: warning: AC_CACHE_VAL(lt_prog_compiler_pic_works, ...): suspicious cache-id, must contain _cv_ to be cached
aclocal.m4:3510: AC_LIBTOOL_COMPILER_OPTION is expanded from...
aclocal.m4:7620: AC_LIBTOOL_PROG_COMPILER_PIC is expanded from...
configure.in:150: warning: AC_CACHE_VAL(lt_prog_compiler_pic_works_CXX, ...): suspicious cache-id, must contain _cv_ to be cached
aclocal.m4:5606: _LT_AC_LANG_CXX_CONFIG is expanded from...
aclocal.m4:5605: AC_LIBTOOL_LANG_CXX_CONFIG is expanded from...
aclocal.m4:4641: _LT_AC_TAGCONFIG is expanded from...
DEBUG: Executing proc-pre-org.macports.configure-configure-1
DEBUG: Executing org.macports.configure (php5-oracle)
DEBUG: Configuring in oci8
DEBUG: Environment: CFLAGS='-O2 -arch ppc' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-O2 -arch ppc' MACOSX_DEPLOYMENT_TARGET='10.4' CXX='/usr/bin/g++-4.0' F90FLAGS='-O2 -m32' LDFLAGS='-L/opt/local/lib' OBJC='/usr/bin/gcc-4.0' FCFLAGS='-O2 -m32' INSTALL='/usr/bin/install -c' OBJCFLAGS='-O2 -arch ppc' FFLAGS='-O2 -m32' CC='/usr/bin/gcc-4.0'
DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_php_php5-oracle/work/php-5.3.1/ext/oci8" && ./configure --prefix=/opt/local --with-oci8=instantclient,/opt/local/lib/oracle --with-pdo-oci=instantclient,/opt/local/lib/oracle,10.1'
configure: WARNING: unrecognized options: --with-pdo-oci
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for a sed that does not truncate output... /opt/local/bin/gsed
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether /usr/bin/gcc-4.0 accepts -g... yes
checking for /usr/bin/gcc-4.0 option to accept ISO C89... none needed
checking how to run the C preprocessor... /usr/bin/gcc-4.0 -E
checking for icc... no
checking for suncc... no
checking whether /usr/bin/gcc-4.0 and cc understand -c and -o together... yes
checking for system library directory... lib
checking if compiler supports -R... no
checking if compiler supports -Wl,-rpath,... no
checking build system type... powerpc-apple-darwin8.11.0
checking host system type... powerpc-apple-darwin8.11.0
checking target system type... powerpc-apple-darwin8.11.0
checking for PHP prefix... /opt/local
checking for PHP includes... -I/opt/local/include/php -I/opt/local/include/php/main -I/opt/local/include/php/TSRM -I/opt/local/include/php/Zend -I/opt/local/include/php/ext -I/opt/local/include/php/ext/date/lib -I/opt/local/include
checking for PHP extension directory... /opt/local/lib/php/extensions/no-debug-non-zts-20090626
checking for PHP installed headers prefix... /opt/local/include/php
checking if debug is enabled... no
checking if zts is enabled... no
checking for re2c... no
configure: WARNING: You will need re2c 0.13.4 or later if you want to regenerate PHP parsers.
checking for gawk... gawk
checking for Oracle (OCI8) support... yes, shared
checking PHP version... Unknown option: n
Usage: head [-options] <url>...
    -m <method>   use method for the request (default is 'HEAD')
    -f            make request even if head believes method is illegal
    -b <base>     Use the specified URL as base
    -t <timeout>  Set timeout value
    -i <time>     Set the If-Modified-Since header on the request
    -c <conttype> use this content-type for POST, PUT, CHECKIN
    -a            Use text mode for content I/O
    -p <proxyurl> use this as a proxy
    -P            don't load proxy settings from environment
    -H <header>   send this HTTP header (you can specify several)

    -u            Display method and URL before any response
    -U            Display request headers (implies -u)
    -s            Display response status code
    -S            Display response status chain
    -e            Display response headers
    -d            Do not display content
    -o <format>   Process HTML content in various ways

    -v            Show program version
    -h            Print this message

    -x            Extra debugging output
configure: error: failed to detect PHP version, please report
Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_php_php5-oracle/work/php-5.3.1/ext/oci8" && ./configure --prefix=/opt/local --with-oci8=instantclient,/opt/local/lib/oracle --with-pdo-oci=instantclient,/opt/local/lib/oracle,10.1 " returned error 1
DEBUG: Backtrace: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_php_php5-oracle/work/php-5.3.1/ext/oci8" && ./configure --prefix=/opt/local --with-oci8=instantclient,/opt/local/lib/oracle --with-pdo-oci=instantclient,/opt/local/lib/oracle,10.1 " returned error 1
    while executing
"$procedure $targetname"
Warning: the following items did not execute (for php5-oracle): org.macports.activate org.macports.configure org.macports.build org.macports.destroot org.macports.install
Error: Status 1 encountered during processing.
To report a bug, see <http://guide.macports.org/#project.tickets>

Change History (1)

comment:1 Changed 14 years ago by ryandesign (Ryan Carsten Schmidt)

Description:	modified (diff)
Resolution:	→ invalid
Status:	new → closed

Don't forget WikiFormatting.

You have installed libwww-perl with its helper "HEAD" program, which has replaced your OS's unrelated "head" program because Mac OS X's filesystem is case-insensitive. Please restore the proper "head" program into your /usr/bin from your backups or from another machine with the same OS version, or reinstall Mac OS X to get it back. To avoid this, don't install libwww-perl with its "helper" scripts. If you install p5-libwww-perl using MacPorts, it will not include these helper scripts so you will not have this problem.

http://www.macosxhints.com/article.php?story=20010603142727786&query=perl+HEAD

Note: See TracTickets for help on using tickets.

Download in other formats: