pypy won't compile

[brejoc@…]

Hi!

I don't know what's the problem. Just copy&pasted the output. Hope that helps.

Kind regards

Jochen Breuer

%% sudo port -d install pypy

DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/pypy DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: universal_variant is false, so not adding the default universal variant DEBUG: Starting logging for pypy DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libffi 3.0.9_0 exists in the ports tree DEBUG: libffi 3.0.9_0 is the latest installed DEBUG: libffi 3.0.9_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libffi DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: No need to upgrade! libffi 3.0.9_0 >= libffi 3.0.9_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: python26 2.6.5_2 exists in the ports tree DEBUG: python26 2.6.5_2 +darwin is the latest installed DEBUG: python26 2.6.5_2 +darwin is active DEBUG: Merging existing variants '+darwin' into variants DEBUG: new fully merged portvariants: darwin + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python26 DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port python26. DEBUG: Skipping upgrade since python26 2.6.5_2 >= python26 2.6.5_2, even though installed variants "+darwin" do not match "". DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gettext 0.18.1.1_0 exists in the ports tree DEBUG: gettext 0.18.1.1_0 is the latest installed DEBUG: gettext 0.18.1.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: No need to upgrade! gettext 0.18.1.1_0 >= gettext 0.18.1.1_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libiconv 1.13.1_0 exists in the ports tree DEBUG: libiconv 1.13.1_0 is the latest installed DEBUG: libiconv 1.13.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: ncurses 5.7_0 exists in the ports tree DEBUG: ncurses 5.7_0 +darwin_10 is the latest installed DEBUG: ncurses 5.7_0 +darwin_10 is active DEBUG: Merging existing variants '+darwin_10' into variants DEBUG: new fully merged portvariants: darwin_10 + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin_10 is not provided by port ncurses. DEBUG: Skipping upgrade since ncurses 5.7_0 >= ncurses 5.7_0, even though installed variants "+darwin_10" do not match "". DEBUG: epoch: in tree: 0 installed: 0 DEBUG: ncursesw 5.7_0 exists in the ports tree DEBUG: ncursesw 5.7_0 +darwin_10 is the latest installed DEBUG: ncursesw 5.7_0 +darwin_10 is active DEBUG: Merging existing variants '+darwin_10' into variants DEBUG: new fully merged portvariants: darwin_10 + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin_10 is not provided by port ncursesw. DEBUG: Skipping upgrade since ncursesw 5.7_0 >= ncursesw 5.7_0, even though installed variants "+darwin_10" do not match "". DEBUG: epoch: in tree: 0 installed: 0 DEBUG: expat 2.0.1_0 exists in the ports tree DEBUG: expat 2.0.1_0 is the latest installed DEBUG: expat 2.0.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: zlib 1.2.5_0 exists in the ports tree DEBUG: zlib 1.2.5_0 is the latest installed DEBUG: zlib 1.2.5_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0 DEBUG: epoch: in tree: 1 installed: 1 DEBUG: openssl 0.9.8o_0 exists in the ports tree DEBUG: openssl 0.9.8o_0 +darwin is the latest installed DEBUG: openssl 0.9.8o_0 +darwin is active DEBUG: Merging existing variants '+darwin' into variants DEBUG: new fully merged portvariants: darwin + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port openssl. DEBUG: Skipping upgrade since openssl 0.9.8o_0 >= openssl 0.9.8o_0, even though installed variants "+darwin" do not match "". DEBUG: epoch: in tree: 0 installed: 0 DEBUG: tk 8.5.8_0 exists in the ports tree DEBUG: tk 8.5.8_0 +darwin is the latest installed DEBUG: tk 8.5.8_0 +darwin is active DEBUG: Merging existing variants '+darwin' into variants DEBUG: new fully merged portvariants: darwin + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/tk DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: adding the default universal variant DEBUG: Requested variant darwin is not provided by port tk. DEBUG: Skipping upgrade since tk 8.5.8_0 >= tk 8.5.8_0, even though installed variants "+darwin" do not match "". DEBUG: epoch: in tree: 0 installed: 0 DEBUG: tcl 8.5.8_0 exists in the ports tree DEBUG: tcl 8.5.8_0 +darwin is the latest installed DEBUG: tcl 8.5.8_0 +darwin is active DEBUG: Merging existing variants '+darwin' into variants DEBUG: new fully merged portvariants: darwin + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/tcl DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port tcl. DEBUG: Skipping upgrade since tcl 8.5.8_0 >= tcl 8.5.8_0, even though installed variants "+darwin" do not match "". DEBUG: epoch: in tree: 0 installed: 0 DEBUG: Xft2 2.1.14_0 exists in the ports tree DEBUG: Xft2 2.1.14_0 is the latest installed DEBUG: Xft2 2.1.14_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2 DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: No need to upgrade! Xft2 2.1.14_0 >= Xft2 2.1.14_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xrender 0.9.6_0 exists in the ports tree DEBUG: xrender 0.9.6_0 is the latest installed DEBUG: xrender 0.9.6_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: No need to upgrade! xrender 0.9.6_0 >= xrender 0.9.6_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libX11 1.3.4_0 exists in the ports tree DEBUG: xorg-libX11 1.3.4_0 is the latest installed DEBUG: xorg-libX11 1.3.4_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11 DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: No need to upgrade! xorg-libX11 1.3.4_0 >= xorg-libX11 1.3.4_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXdmcp 1.0.3_0 exists in the ports tree DEBUG: xorg-libXdmcp 1.0.3_0 is the latest installed DEBUG: xorg-libXdmcp 1.0.3_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: No need to upgrade! xorg-libXdmcp 1.0.3_0 >= xorg-libXdmcp 1.0.3_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXau 1.0.5_0 exists in the ports tree DEBUG: xorg-libXau 1.0.5_0 is the latest installed DEBUG: xorg-libXau 1.0.5_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: No need to upgrade! xorg-libXau 1.0.5_0 >= xorg-libXau 1.0.5_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-xproto 7.0.17_0 exists in the ports tree DEBUG: xorg-xproto 7.0.17_0 is the latest installed DEBUG: xorg-xproto 7.0.17_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: only one arch supported, so not adding the default universal variant DEBUG: No need to upgrade! xorg-xproto 7.0.17_0 >= xorg-xproto 7.0.17_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-kbproto 1.0.4_0 exists in the ports tree DEBUG: xorg-kbproto 1.0.4_0 is the latest installed DEBUG: xorg-kbproto 1.0.4_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: only one arch supported, so not adding the default universal variant DEBUG: No need to upgrade! xorg-kbproto 1.0.4_0 >= xorg-kbproto 1.0.4_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-renderproto 0.11_0 exists in the ports tree DEBUG: xorg-renderproto 0.11_0 is the latest installed DEBUG: xorg-renderproto 0.11_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-renderproto DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: only one arch supported, so not adding the default universal variant DEBUG: No need to upgrade! xorg-renderproto 0.11_0 >= xorg-renderproto 0.11_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: freetype 2.3.12_0 exists in the ports tree DEBUG: freetype 2.3.12_0 +macosx is the latest installed DEBUG: freetype 2.3.12_0 +macosx is active DEBUG: Merging existing variants '+macosx' into variants DEBUG: new fully merged portvariants: macosx + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant macosx is not provided by port freetype. DEBUG: Skipping upgrade since freetype 2.3.12_0 >= freetype 2.3.12_0, even though installed variants "+macosx" do not match "". DEBUG: epoch: in tree: 0 installed: 0 DEBUG: fontconfig 2.8.0_0 exists in the ports tree DEBUG: fontconfig 2.8.0_0 +macosx is the latest installed DEBUG: fontconfig 2.8.0_0 +macosx is active DEBUG: Merging existing variants '+macosx' into variants DEBUG: new fully merged portvariants: macosx + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant macosx is not provided by port fontconfig. DEBUG: Skipping upgrade since fontconfig 2.8.0_0 >= fontconfig 2.8.0_0, even though installed variants "+macosx" do not match "". DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXScrnSaver 1.2.0_0 exists in the ports tree DEBUG: xorg-libXScrnSaver 1.2.0_0 is the latest installed DEBUG: xorg-libXScrnSaver 1.2.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXScrnSaver DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: No need to upgrade! xorg-libXScrnSaver 1.2.0_0 >= xorg-libXScrnSaver 1.2.0_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXext 1.1.2_0 exists in the ports tree DEBUG: xorg-libXext 1.1.2_0 is the latest installed DEBUG: xorg-libXext 1.1.2_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXext DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: No need to upgrade! xorg-libXext 1.1.2_0 >= xorg-libXext 1.1.2_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-xextproto 7.1.1_0 exists in the ports tree DEBUG: xorg-xextproto 7.1.1_0 is the latest installed DEBUG: xorg-xextproto 7.1.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: only one arch supported, so not adding the default universal variant DEBUG: No need to upgrade! xorg-xextproto 7.1.1_0 >= xorg-xextproto 7.1.1_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-scrnsaverproto 1.2.0_0 exists in the ports tree DEBUG: xorg-scrnsaverproto 1.2.0_0 is the latest installed DEBUG: xorg-scrnsaverproto 1.2.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-scrnsaverproto DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: only one arch supported, so not adding the default universal variant DEBUG: No need to upgrade! xorg-scrnsaverproto 1.2.0_0 >= xorg-scrnsaverproto 1.2.0_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: sqlite3 3.6.23.1_0 exists in the ports tree DEBUG: sqlite3 3.6.23.1_0 is the latest installed DEBUG: sqlite3 3.6.23.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3 DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: No need to upgrade! sqlite3 3.6.23.1_0 >= sqlite3 3.6.23.1_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: readline 6.1.000_1 exists in the ports tree DEBUG: readline 6.1.000_1 +darwin is the latest installed DEBUG: readline 6.1.000_1 +darwin is active DEBUG: Merging existing variants '+darwin' into variants DEBUG: new fully merged portvariants: darwin + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port readline. DEBUG: Skipping upgrade since readline 6.1.000_1 >= readline 6.1.000_1, even though installed variants "+darwin" do not match "". DEBUG: epoch: in tree: 0 installed: 0 DEBUG: db46 4.6.21_6 exists in the ports tree DEBUG: db46 4.6.21_6 is the latest installed DEBUG: db46 4.6.21_6 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46 DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gdbm 1.8.3_2 exists in the ports tree DEBUG: gdbm 1.8.3_2 is the latest installed DEBUG: gdbm 1.8.3_2 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: No need to upgrade! gdbm 1.8.3_2 >= gdbm 1.8.3_2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: bzip2 1.0.5_3 exists in the ports tree DEBUG: bzip2 1.0.5_3 +darwin is the latest installed DEBUG: bzip2 1.0.5_3 +darwin is active DEBUG: Merging existing variants '+darwin' into variants DEBUG: new fully merged portvariants: darwin + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2 DEBUG: OS darwin/10.4.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port bzip2. DEBUG: Skipping upgrade since bzip2 1.0.5_3 >= bzip2 1.0.5_3, even though installed variants "+darwin" do not match "". ---> Computing dependencies for pypy DEBUG: Searching for dependency: libffi DEBUG: Found Dependency: receipt exists for libffi DEBUG: Searching for dependency: python26 DEBUG: Found Dependency: receipt exists for python26 DEBUG: Executing org.macports.main (pypy) DEBUG: Skipping completed org.macports.fetch (pypy) DEBUG: Skipping completed org.macports.checksum (pypy) DEBUG: setting option extract.cmd to /usr/bin/bzip2 DEBUG: Skipping completed org.macports.extract (pypy) DEBUG: Skipping completed org.macports.patch (pypy) DEBUG: Skipping completed org.macports.configure (pypy) ---> Building pypy DEBUG: build phase started at Mon Jun 28 11:33:36 CEST 2010 DEBUG: Executing org.macports.build (pypy) DEBUG: Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6' DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/work/pypy-1.2/pypy/translator/goal" && arch -x86_64 /opt/local/bin/python2.6 translate.py --batch --cc=/usr/bin/gcc-4.2 --opt=3 --cflags="-arch x86_64 -I/opt/local/include -L/opt/local/lib" targetpypystandalone.py' [translation:info] Translating target as defined by targetpypystandalone [platform:msg] Setting platform to 'host' cc=/usr/bin/gcc-4.2 [platform:execute] /usr/bin/gcc-4.2 -c -arch x86_64 -O3 -fomit-frame-pointer -mmacosx-version-min=10.4 -mdynamic-no-pic /tmp/usession-3/platcheck_6.c -o /tmp/usession-3/platcheck_6.o [platform:execute] /usr/bin/gcc-4.2 -c -arch x86_64 -O3 -fomit-frame-pointer -mmacosx-version-min=10.4 -mdynamic-no-pic /tmp/usession-3/module_cache/module_0.c -o /tmp/usession-3/module_cache/module_0.o [platform:execute] /usr/bin/gcc-4.2 /tmp/usession-3/platcheck_6.o /tmp/usession-3/module_cache/module_0.o -arch x86_64 -mmacosx-version-min=10.4 -o /tmp/usession-3/platcheck_6 [translation] PyPy config object: [translation] [objspace] [translation] compiler = ast [translation] nofaking = True [translation] [opcodes] [translation] CALL_LIKELY_BUILTIN = True [translation] CALL_METHOD = True [translation] [std] [translation] builtinshortcut = True [translation] getattributeshortcut = True [translation] newshortcut = True [translation] optimized_list_getitem = True [translation] withinlineddict = True [translation] withmethodcache = True [translation] withprebuiltchar = True [translation] withrangelist = True [translation] withshadowtracking = False [translation] withsharingdict = True [translation] withtypeversion = True [translation] [usemodules] [translation] pypy = True [translation] _ast = True [translation] _codecs = True [translation] _lsprof = True [translation] _minimal_curses = True [translation] _pickle_support = True [translation] _random = True [translation] _rawffi = True [translation] _socket = True [translation] _sre = True [translation] _ssl = True [translation] _testing = True [translation] _weakref = True [translation] bz2 = True [translation] cStringIO = True [translation] crypt = True [translation] errno = True [translation] fcntl = True [translation] gc = True [translation] imp = True [translation] itertools = True [translation] marshal = True [translation] math = True [translation] md5 = True [translation] mmap = True [translation] operator = True [translation] parser = True [translation] posix = True [translation] pyexpat = True [translation] rctime = True [translation] select = True [translation] sha = True [translation] signal = True [translation] struct = True [translation] symbol = True [translation] termios = True [translation] thread = True [translation] time = True [translation] token = True [translation] unicodedata = True [translation] zipimport = True [translation] zlib = True [platform:execute] /usr/bin/gcc-4.2 -c -arch x86_64 -O3 -fomit-frame-pointer -mmacosx-version-min=10.4 -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/work/pypy-1.2/pypy/translator/c /tmp/usession-3/module_cache/module_1.c -o /tmp/usession-3/module_cache/module_1.o [platform:execute] /usr/bin/gcc-4.2 -bundle -undefined dynamic_lookup /tmp/usession-3/module_cache/module_1.o -arch x86_64 -mmacosx-version-min=10.4 -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/work/pypy-1.2/pypy/translator/c -o /tmp/usession-3/module_cache/externmod.so [platform:execute] /usr/bin/gcc-4.2 -c -arch x86_64 -O3 -fomit-frame-pointer -mmacosx-version-min=10.4 -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/work/pypy-1.2/pypy/translator/c /tmp/usession-3/module_cache/module_2.c -o /tmp/usession-3/module_cache/module_2.o [platform:execute] /usr/bin/gcc-4.2 -bundle -undefined dynamic_lookup /tmp/usession-3/module_cache/module_2.o -arch x86_64 -mmacosx-version-min=10.4 -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/work/pypy-1.2/pypy/translator/c -o /tmp/usession-3/module_cache/externmod_0.so [translation:ERROR] Error: [translation:ERROR] Traceback (most recent call last): [translation:ERROR] File "translate.py", line 259, in main [translation:ERROR] default_goal='compile') [translation:ERROR] File "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/work/pypy-1.2/pypy/translator/driver.py", line 763, in from_targetspec [translation:ERROR] spec = target(driver, args) [translation:ERROR] File "targetpypystandalone.py", line 223, in target [translation:ERROR] return self.get_entry_point(config) [translation:ERROR] File "targetpypystandalone.py", line 239, in get_entry_point [translation:ERROR] entry_point = create_entry_point(space, w_dict) [translation:ERROR] File "targetpypystandalone.py", line 31, in create_entry_point [translation:ERROR] w_os = setup_nanos(space) [translation:ERROR] File "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/work/pypy-1.2/pypy/translator/goal/nanos.py", line 50, in setup_nanos [translation:ERROR] w_os_path = space.wrap(app_os_path.buildmodule(space, 'path')) [translation:ERROR] File "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/work/pypy-1.2/pypy/interpreter/gateway.py", line 855, in buildmodule [translation:ERROR] return Module(space, space.wrap(name), self.getwdict(space)) [translation:ERROR] File "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/work/pypy-1.2/pypy/interpreter/gateway.py", line 851, in getwdict [translation:ERROR] return space.fromcache(ApplevelCache).getorbuild(self) [translation:ERROR] File "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/work/pypy-1.2/pypy/tool/cache.py", line 51, in getorbuild [translation:ERROR] result = self._build(key) [translation:ERROR] File "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/work/pypy-1.2/pypy/interpreter/baseobjspace.py", line 195, in _build [translation:ERROR] return self.build(key) [translation:ERROR] File "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/work/pypy-1.2/pypy/interpreter/gateway.py", line 910, in build [translation:ERROR] return PyPyCacheDir.build_applevelinterp_dict(app, self.space) [translation:ERROR] File "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/work/pypy-1.2/pypy/interpreter/gateway.py", line 984, in build_applevelinterp_dict [translation:ERROR] w_glob = initfunc(space) [translation:ERROR] File "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/work/pypy-1.2/pypy/_cache/nanos_2f2d826057fbc600b6c01042ed0d89cc.py", line 658, in initbuiltin [translation:ERROR] gbltin_getcwdu = space.getattr(mod_posix, gs_getcwdu) [translation:ERROR] File "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/work/pypy-1.2/pypy/objspace/std/objspace.py", line 671, in getattr [translation:ERROR] raiseattrerror(self, w_obj, name) [translation:ERROR] File "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/work/pypy-1.2/pypy/objspace/descroperation.py", line 29, in raiseattrerror [translation:ERROR] typename, name) [translation:ERROR] OpErrFmt: [<W_TypeObject(AttributeError)>: 'module' object has no attribute 'getcwdu'] [translation] batch mode, not calling interactive helpers Wrote /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/work/pypy-1.2/pypy/lib/ctypes_config_cache/_hashlib_cache.py. Wrote /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/work/pypy-1.2/pypy/lib/ctypes_config_cache/_locale_cache.py. Wrote /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/work/pypy-1.2/pypy/lib/ctypes_config_cache/_pyexpat_cache.py. Wrote /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/work/pypy-1.2/pypy/lib/ctypes_config_cache/_resource_cache.py. Wrote /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/work/pypy-1.2/pypy/lib/ctypes_config_cache/_syslog_cache.py. shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/work/pypy-1.2/pypy/translator/goal" && arch -x86_64 /opt/local/bin/python2.6 translate.py --batch --cc=/usr/bin/gcc-4.2 --opt=3 --cflags="-arch x86_64 -I/opt/local/include -L/opt/local/lib" targetpypystandalone.py " returned error 1 Error: Target org.macports.build returned: shell command failed DEBUG: Backtrace: shell command failed

while executing

"command_exec build"

(procedure "portbuild::build_main" line 8) invoked from within

"$procedure $targetname" Warning: the following items did not execute (for pypy): org.macports.activate org.macports.build org.macports.destroot org.macports.install Log for pypy is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_pypy/main.log Error: Status 1 encountered during processing. To report a bug, see <​http://guide.macports.org/#project.tickets>