port install of ufraw interrupted and now hangs

[amy.a.gooch@…]

I'm a bit confused on how to get my install to resume. My laptop was shut during installation (sudo port install ufraw) and it did not resume.. I interrupted the hung command and now I can not get it to either reinstall or install. clean doesn't help...

sudo port -d clean ufraw
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/ufraw
DEBUG: OS darwin/9.8.0 (Mac OS X 10.5) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: universal_variant is false, so not adding the default universal variant
DEBUG: Executing org.macports.main (ufraw)
--->  Cleaning ufraw
DEBUG: clean phase started at Mon Aug  2 21:39:02 PDT 2010
DEBUG: Executing org.macports.clean (ufraw)
--->  Removing build directory for ufraw
DEBUG: Removing directory: /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_ufraw
DEBUG: delete: /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_ufraw
DEBUG: No work directory found to remove at /Users/gooch/.macports/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_ufraw
DEBUG: Removing symlink: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/ufraw/work
DEBUG: delete: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/ufraw/work
DEBUG: Removing directory: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_ufraw
DEBUG: delete: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_ufraw

sudo port -d upgrade outdated

hangs too:

DEBUG: epoch: in tree: 0 installed: 0
DEBUG: iso-codes 3.19_0 exists in the ports tree
DEBUG: iso-codes 3.18_0  is the latest installed
DEBUG: iso-codes 3.18_0  is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/iso-codes
DEBUG: OS darwin/9.8.0 (Mac OS X 10.5) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: only one arch supported, so not adding the default universal variant
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gettext 0.18.1.1_2 exists in the ports tree
DEBUG: gettext 0.18.1.1_2  is the latest installed
DEBUG: gettext 0.18.1.1_2  is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
DEBUG: OS darwin/9.8.0 (Mac OS X 10.5) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libiconv 1.13.1_0 exists in the ports tree
DEBUG: libiconv 1.13.1_0  is the latest installed
DEBUG: libiconv 1.13.1_0  is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: OS darwin/9.8.0 (Mac OS X 10.5) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncurses 5.7_0 exists in the ports tree
DEBUG: ncurses 5.7_0  is the latest installed
DEBUG: ncurses 5.7_0  is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: OS darwin/9.8.0 (Mac OS X 10.5) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncursesw 5.7_0 exists in the ports tree
DEBUG: ncursesw 5.7_0  is the latest installed
DEBUG: ncursesw 5.7_0  is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: OS darwin/9.8.0 (Mac OS X 10.5) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: expat 2.0.1_0 exists in the ports tree
DEBUG: expat 2.0.1_0  is the latest installed
DEBUG: expat 2.0.1_0  is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: OS darwin/9.8.0 (Mac OS X 10.5) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
DEBUG: Starting logging for iso-codes

[ryandesign (Ryan Carsten Schmidt)]

Please use WikiFormatting when pasting shell output so it's legible.

The output you showed for "sudo port -d clean ufraw" shows that MacPorts successfully cleaned it; no problem there.

Was the output you showed for "sudo port -d upgrade outdated" complete? Did it really end at "Starting logging for iso-codes" or did you cut it off there? If you cut it off there, let it complete; it looks correct so far. If port did hang there, then let's clean iso-codes and try upgrading just that ("sudo port clean iso-codes", "sudo port -d upgrade iso-codes").

[amy.a.gooch@…]

I had pasted everything from my terminal window into the message (sorry about the lack of formating)

. I did as suggested and it just hangs there too. (see below)

sudo port clean iso-codes
Password:
--->  Cleaning iso-codes
[Amy-Goochs-Computer-3:/opt/local] gooch% sudo port -d upgrade iso-codes
- Hide quoted text -
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: iso-codes 3.19_0 exists in the ports tree
DEBUG: iso-codes 3.18_0  is the latest installed
DEBUG: iso-codes 3.18_0  is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/iso-codes
DEBUG: OS darwin/9.8.0 (Mac OS X 10.5) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: only one arch supported, so not adding the default universal variant
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gettext 0.18.1.1_2 exists in the ports tree
DEBUG: gettext 0.18.1.1_2  is the latest installed
DEBUG: gettext 0.18.1.1_2  is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
DEBUG: OS darwin/9.8.0 (Mac OS X 10.5) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libiconv 1.13.1_0 exists in the ports tree
DEBUG: libiconv 1.13.1_0  is the latest installed
DEBUG: libiconv 1.13.1_0  is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: OS darwin/9.8.0 (Mac OS X 10.5) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncurses 5.7_0 exists in the ports tree
DEBUG: ncurses 5.7_0  is the latest installed
DEBUG: ncurses 5.7_0  is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: OS darwin/9.8.0 (Mac OS X 10.5) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncursesw 5.7_0 exists in the ports tree
DEBUG: ncursesw 5.7_0  is the latest installed
DEBUG: ncursesw 5.7_0  is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: OS darwin/9.8.0 (Mac OS X 10.5) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: expat 2.0.1_0 exists in the ports tree
DEBUG: expat 2.0.1_0  is the latest installed
DEBUG: expat 2.0.1_0  is active
DEBUG: Merging existing variants '' into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: OS darwin/9.8.0 (Mac OS X 10.5) arch i386
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
DEBUG: Attempting ln -sf /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_iso-codes/work /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/iso-codes/work
DEBUG: Starting logging for iso-codes

[mf2k (Frank Schima)]

You might have lingering Macports processes. Have you rebooted since the fateful sleep incident?

[amy.a.gooch@…]

Should have thought of the reboot.. after that was done, I"m in a "possible infinite loop". the error list is really, really long... how do upload a file to this ticket or do I just dump it all in here?

the end of the error is: {{{ DEBUG: too many nested evaluations (infinite loop?)

while executing

"lshift args"

("catch" arm line 2) invoked from within

"switch $arg {

catch {

set elem [lshift args]

if {[llength $args] == 0

[llength $elem] > 4} {

..."

(procedure "try" line 10) invoked from within

"try {

seek $fd $offset gets $fd line set name [lindex $line 0] set len..."

(procedure "mportlookup" line 23) invoked from within

"mportlookup $dep_portname" Error: Internal error: port lookup failed: too many nested evaluations (infinite loop?) Error: Status 1 encountered during processing. To report a bug, see <​http://guide.macports.org/#project.tickets>

}}}

I had tried to pick off a few of them and installed things like python26, gimp2,texlive, but the later two also resulted in the same "Possible Infinite loop".

[amy.a.gooch@…]

I've also tried clean and uninstall

[mf2k (Frank Schima)]

You need to run selfupdate. This was fixed yesterday.

sudo port selfupdate