Opened 13 years ago

Closed 13 years ago

Last modified 13 years ago

#31565 closed defect (duplicate)

installing ipe

Reported by: s.srivasta@… Owned by: macports-tickets@…
Priority: Normal Milestone:
Component: ports Version: 2.0.3
Keywords: Cc:
Port: ipe

Description

version:1 :debug:main epoch: in tree: 0 installed: 0 :debug:main pkgconfig 0.26_0 exists in the ports tree :debug:main pkgconfig 0.26_0 is the latest installed :debug:main pkgconfig 0.26_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! pkgconfig 0.26_0 >= pkgconfig 0.26_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main glib2 2.28.8_0 exists in the ports tree :debug:main glib2 2.28.8_0 is the latest installed :debug:main glib2 2.28.8_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/glib2 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! glib2 2.28.8_0 >= glib2 2.28.8_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main gettext 0.18.1.1_2 exists in the ports tree :debug:main gettext 0.18.1.1_2 is the latest installed :debug:main gettext 0.18.1.1_2 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2 :debug:main epoch: in tree: 0 installed: 0 :debug:main libiconv 1.14_0 exists in the ports tree :debug:main libiconv 1.14_0 is the latest installed :debug:main libiconv 1.14_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main ncurses 5.9_1 exists in the ports tree :debug:main ncurses 5.9_1 is the latest installed :debug:main ncurses 5.9_1 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main expat 2.0.1_1 exists in the ports tree :debug:main expat 2.0.1_1 is the latest installed :debug:main expat 2.0.1_1 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main zlib 1.2.5_0 exists in the ports tree :debug:main zlib 1.2.5_0 is the latest installed :debug:main zlib 1.2.5_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main perl5 5.12.3_1 exists in the ports tree :debug:main perl5 5.12.3_1 +perl5_12 is the latest installed :debug:main perl5 5.12.3_1 +perl5_12 is active :debug:main Merging existing variants '+perl5_12' into variants :debug:main new fully merged portvariants: perl5_12 + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main universal_variant is false, so not adding the default universal variant :debug:main Executing variant perl5_12 provides perl5_12 :debug:main No need to upgrade! perl5 5.12.3_1 >= perl5 5.12.3_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main perl5.12 5.12.3_2 exists in the ports tree :debug:main perl5.12 5.12.3_2 is the latest installed :debug:main perl5.12 5.12.3_2 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.12 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! perl5.12 5.12.3_2 >= perl5.12 5.12.3_2 :debug:main epoch: in tree: 0 installed: 0 :debug:main gdbm 1.9.1_0 exists in the ports tree :debug:main gdbm 1.9.1_0 is the latest installed :debug:main gdbm 1.9.1_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! gdbm 1.9.1_0 >= gdbm 1.9.1_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main makeicns 1.4.9_0 exists in the ports tree :debug:main makeicns 1.4.9_0 is the latest installed :debug:main makeicns 1.4.9_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/makeicns :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! makeicns 1.4.9_0 >= makeicns 1.4.9_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main qt4-mac 4.7.4_1 exists in the ports tree :debug:main qt4-mac 4.7.4_1 +quartz is the latest installed :debug:main qt4-mac 4.7.4_1 +quartz is active :debug:main Merging existing variants '+quartz' into variants :debug:main new fully merged portvariants: quartz + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/aqua/qt4-mac :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/qt4-1.0.tcl :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Executing variant quartz provides quartz :debug:main No need to upgrade! qt4-mac 4.7.4_1 >= qt4-mac 4.7.4_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main dbus 1.4.12_0 exists in the ports tree :debug:main dbus 1.4.12_0 is the latest installed :debug:main dbus 1.4.12_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/dbus :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! dbus 1.4.12_0 >= dbus 1.4.12_0 :debug:main epoch: in tree: 1 installed: 1 :debug:main openssl 1.0.0e_1 exists in the ports tree :debug:main openssl 1.0.0e_1 is the latest installed :debug:main openssl 1.0.0e_1 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! openssl 1.0.0e_1 >= openssl 1.0.0e_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main sqlite3 3.7.8_1 exists in the ports tree :debug:main sqlite3 3.7.8_1 is the latest installed :debug:main sqlite3 3.7.8_1 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! sqlite3 3.7.8_1 >= sqlite3 3.7.8_1 :debug:main epoch: in tree: 20090923 installed: 20090923 :debug:main libedit 20110802-3.0_0 exists in the ports tree :debug:main libedit 20110802-3.0_0 is the latest installed :debug:main libedit 20110802-3.0_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libedit :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! libedit 20110802-3.0_0 >= libedit 20110802-3.0_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main tiff 3.9.5_0 exists in the ports tree :debug:main tiff 3.9.5_0 is the latest installed :debug:main tiff 3.9.5_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! tiff 3.9.5_0 >= tiff 3.9.5_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main jpeg 8c_0 exists in the ports tree :debug:main jpeg 8c_0 is the latest installed :debug:main jpeg 8c_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! jpeg 8c_0 >= jpeg 8c_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main libpng 1.4.8_0 exists in the ports tree :debug:main libpng 1.4.8_0 is the latest installed :debug:main libpng 1.4.8_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! libpng 1.4.8_0 >= libpng 1.4.8_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main libmng 1.0.10_2 exists in the ports tree :debug:main libmng 1.0.10_2 is the latest installed :debug:main libmng 1.0.10_2 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libmng :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! libmng 1.0.10_2 >= libmng 1.0.10_2 :debug:main epoch: in tree: 0 installed: 0 :debug:main lcms 1.19_2 exists in the ports tree :debug:main lcms 1.19_2 is the latest installed :debug:main lcms 1.19_2 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/lcms :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! lcms 1.19_2 >= lcms 1.19_2 :debug:main epoch: in tree: 0 installed: 0 :debug:main freetype 2.4.6_0 exists in the ports tree :debug:main freetype 2.4.6_0 is the latest installed :debug:main freetype 2.4.6_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! freetype 2.4.6_0 >= freetype 2.4.6_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main bzip2 1.0.6_0 exists in the ports tree :debug:main bzip2 1.0.6_0 is the latest installed :debug:main bzip2 1.0.6_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main cairo 1.10.2_4 exists in the ports tree :debug:main cairo 1.10.2_4 +x11 is the latest installed :debug:main cairo 1.10.2_4 +x11 is active :debug:main Merging existing variants '+x11' into variants :debug:main new fully merged portvariants: x11 + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/cairo :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl :debug:main universal variant already exists, so not adding the default one :debug:main Executing variant x11 provides x11 :debug:main No need to upgrade! cairo 1.10.2_4 >= cairo 1.10.2_4 :debug:main epoch: in tree: 0 installed: 0 :debug:main libpixman 0.22.2_1 exists in the ports tree :debug:main libpixman 0.22.2_1 is the latest installed :debug:main libpixman 0.22.2_1 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpixman :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! libpixman 0.22.2_1 >= libpixman 0.22.2_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main fontconfig 2.8.0_0 exists in the ports tree :debug:main fontconfig 2.8.0_0 is the latest installed :debug:main fontconfig 2.8.0_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! fontconfig 2.8.0_0 >= fontconfig 2.8.0_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xrender 0.9.6_0 exists in the ports tree :debug:main xrender 0.9.6_0 is the latest installed :debug:main xrender 0.9.6_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! xrender 0.9.6_0 >= xrender 0.9.6_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libX11 1.4.4_0 exists in the ports tree :debug:main xorg-libX11 1.4.4_0 is the latest installed :debug:main xorg-libX11 1.4.4_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! xorg-libX11 1.4.4_0 >= xorg-libX11 1.4.4_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libXdmcp 1.1.0_0 exists in the ports tree :debug:main xorg-libXdmcp 1.1.0_0 is the latest installed :debug:main xorg-libXdmcp 1.1.0_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! xorg-libXdmcp 1.1.0_0 >= xorg-libXdmcp 1.1.0_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libXau 1.0.6_0 exists in the ports tree :debug:main xorg-libXau 1.0.6_0 is the latest installed :debug:main xorg-libXau 1.0.6_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! xorg-libXau 1.0.6_0 >= xorg-libXau 1.0.6_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-xproto 7.0.22_0 exists in the ports tree :debug:main xorg-xproto 7.0.22_0 is the latest installed :debug:main xorg-xproto 7.0.22_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main only one arch supported, so not adding the default universal variant :debug:main No need to upgrade! xorg-xproto 7.0.22_0 >= xorg-xproto 7.0.22_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libxcb 1.7_0 exists in the ports tree :debug:main xorg-libxcb 1.7_0 +python27 is the latest installed :debug:main xorg-libxcb 1.7_0 +python27 is active :debug:main Merging existing variants '+python27' into variants :debug:main new fully merged portvariants: python27 + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libxcb :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Executing variant python27 provides python27 :debug:main No need to upgrade! xorg-libxcb 1.7_0 >= xorg-libxcb 1.7_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-xcb-proto 1.6_0 exists in the ports tree :debug:main xorg-xcb-proto 1.6_0 +python27 is the latest installed :debug:main xorg-xcb-proto 1.6_0 +python27 is active :debug:main Merging existing variants '+python27' into variants :debug:main new fully merged portvariants: python27 + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcb-proto :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main only one arch supported, so not adding the default universal variant :debug:main Executing variant python27 provides python27 :debug:main No need to upgrade! xorg-xcb-proto 1.6_0 >= xorg-xcb-proto 1.6_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main libxml2 2.7.8_0 exists in the ports tree :debug:main libxml2 2.7.8_0 is the latest installed :debug:main libxml2 2.7.8_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! libxml2 2.7.8_0 >= libxml2 2.7.8_0 :debug:main epoch: in tree: 2 installed: 2 :debug:main python27 2.7.2_1 exists in the ports tree :debug:main python27 2.7.2_1 is the latest installed :debug:main python27 2.7.2_1 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python27 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! python27 2.7.2_1 >= python27 2.7.2_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main db46 4.6.21_6 exists in the ports tree :debug:main db46 4.6.21_6 is the latest installed :debug:main db46 4.6.21_6 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main Executing variant java provides java :debug:main Skipping upgrade since db46 4.6.21_6 >= db46 4.6.21_6, even though installed variants "" do not match "+java". :debug:main epoch: in tree: 0 installed: 0 :debug:main readline 6.2.000_0 exists in the ports tree :debug:main readline 6.2.000_0 is the latest installed :debug:main readline 6.2.000_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! readline 6.2.000_0 >= readline 6.2.000_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main python_select 0.3_1 exists in the ports tree :debug:main python_select 0.3_1 is the latest installed :debug:main python_select 0.3_1 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/python_select :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl :debug:main universal_variant is false, so not adding the default universal variant :debug:main No need to upgrade! python_select 0.3_1 >= python_select 0.3_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libpthread-stubs 0.3_0 exists in the ports tree :debug:main xorg-libpthread-stubs 0.3_0 is the latest installed :debug:main xorg-libpthread-stubs 0.3_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libpthread-stubs :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main only one arch supported, so not adding the default universal variant :debug:main No need to upgrade! xorg-libpthread-stubs 0.3_0 >= xorg-libpthread-stubs 0.3_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-kbproto 1.0.5_0 exists in the ports tree :debug:main xorg-kbproto 1.0.5_0 is the latest installed :debug:main xorg-kbproto 1.0.5_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main only one arch supported, so not adding the default universal variant :debug:main No need to upgrade! xorg-kbproto 1.0.5_0 >= xorg-kbproto 1.0.5_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-renderproto 0.11.1_0 exists in the ports tree :debug:main xorg-renderproto 0.11.1_0 is the latest installed :debug:main xorg-renderproto 0.11.1_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-renderproto :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main only one arch supported, so not adding the default universal variant :debug:main No need to upgrade! xorg-renderproto 0.11.1_0 >= xorg-renderproto 0.11.1_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-xcb-util 0.3.8_0 exists in the ports tree :debug:main xorg-xcb-util 0.3.8_0 is the latest installed :debug:main xorg-xcb-util 0.3.8_0 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcb-util :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! xorg-xcb-util 0.3.8_0 >= xorg-xcb-util 0.3.8_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main lua 5.1.4_4 exists in the ports tree :debug:main lua 5.1.4_4 is the latest installed :debug:main lua 5.1.4_4 is active :debug:main Merging existing variants into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/lua :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! lua 5.1.4_4 >= lua 5.1.4_4 :msg:main ---> Computing dependencies for ipe:info:main .:debug:main Searching for dependency: pkgconfig :debug:main Found Dependency: receipt exists for pkgconfig :debug:main Searching for dependency: makeicns :debug:main Found Dependency: receipt exists for makeicns :debug:main Searching for dependency: qt4-mac :debug:main Found Dependency: receipt exists for qt4-mac :debug:main Searching for dependency: freetype :debug:main Found Dependency: receipt exists for freetype :debug:main Searching for dependency: cairo :debug:main Found Dependency: receipt exists for cairo :debug:main Searching for dependency: lua :debug:main Found Dependency: receipt exists for lua :debug:main Searching for dependency: zlib :debug:main Found Dependency: receipt exists for zlib :msg:main :debug:main Executing org.macports.main (ipe) :debug:archivefetch archivefetch phase started at Tue Oct 11 08:30:46 CEST 2011 :msg:archivefetch ---> Fetching archive for ipe :debug:archivefetch Executing org.macports.archivefetch (ipe) :info:archivefetch ---> ipe-7.0.14_1.darwin_10.x86_64.tgz doesn't seem to exist in /opt/local/var/macports/software/ipe :msg:archivefetch ---> Attempting to fetch ipe-7.0.14_1.darwin_10.x86_64.tgz from http://packages.macports.org/ipe :debug:archivefetch Fetching archive failed:: The requested URL returned error: 404 :debug:fetch fetch phase started at Tue Oct 11 08:30:46 CEST 2011 :notice:fetch ---> Fetching ipe :debug:fetch Executing org.macports.fetch (ipe) :debug:checksum checksum phase started at Tue Oct 11 08:30:46 CEST 2011 :notice:checksum ---> Verifying checksum(s) for ipe :debug:checksum Executing org.macports.checksum (ipe) :info:checksum ---> Checksumming ipe-7.0.14-src.tar.gz :debug:checksum Correct (sha1) checksum for ipe-7.0.14-src.tar.gz :debug:checksum Correct (rmd160) checksum for ipe-7.0.14-src.tar.gz :debug:extract extract phase started at Tue Oct 11 08:30:47 CEST 2011 :notice:extract ---> Extracting ipe :debug:extract Executing proc-pre-org.macports.extract-extract-0 :debug:extract Executing org.macports.extract (ipe) :info:extract ---> Extracting ipe-7.0.14-src.tar.gz :debug:extract setting option extract.args to '/opt/local/var/macports/distfiles/ipe/ipe-7.0.14-src.tar.gz' :debug:extract Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_ipe/ipe/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6' :debug:extract Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_ipe/ipe/work" && /usr/bin/gzip -dc '/opt/local/var/macports/distfiles/ipe/ipe-7.0.14-src.tar.gz' | /usr/bin/gnutar --no-same-owner -xf -' :debug:extract Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_ipe/ipe/work" && /usr/bin/gzip -dc '/opt/local/var/macports/distfiles/ipe/ipe-7.0.14-src.tar.gz' | /usr/bin/gnutar --no-same-owner -xf - :debug:patch patch phase started at Tue Oct 11 08:30:48 CEST 2011 :debug:patch Executing org.macports.patch (ipe) :notice:patch ---> Applying patches to ipe :info:patch ---> Applying /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/ipe/files/patch-common.mak.diff :debug:patch Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_ipe/ipe/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6' :debug:patch Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_ipe/ipe/work/ipe-7.0.14/src" && /usr/bin/patch -p0' :debug:patch Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_ipe/ipe/work/ipe-7.0.14/src" && /usr/bin/patch -p0 < '/opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/ipe/files/patch-common.mak.diff' :info:patch patching file common.mak :info:patch ---> Applying /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/ipe/files/patch-config.mak.diff :debug:patch Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_ipe/ipe/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6' :debug:patch Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_ipe/ipe/work/ipe-7.0.14/src" && /usr/bin/patch -p0' :debug:patch Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_ipe/ipe/work/ipe-7.0.14/src" && /usr/bin/patch -p0 < '/opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/ipe/files/patch-config.mak.diff' :info:patch patching file config.mak :info:patch ---> Applying /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/ipe/files/patch-ipe-lua-prefs.lua.diff :debug:patch Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_ipe/ipe/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6' :debug:patch Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_ipe/ipe/work/ipe-7.0.14/src" && /usr/bin/patch -p0' :debug:patch Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_ipe/ipe/work/ipe-7.0.14/src" && /usr/bin/patch -p0 < '/opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/ipe/files/patch-ipe-lua-prefs.lua.diff' :info:patch patching file ipe/lua/prefs.lua :debug:configure configure phase started at Tue Oct 11 08:30:48 CEST 2011 :notice:configure ---> Configuring ipe :debug:configure Using compiler 'Mac OS X gcc 4.2' :debug:configure Executing org.macports.configure (ipe) :debug:build build phase started at Tue Oct 11 08:30:48 CEST 2011 :notice:build ---> Building ipe :debug:build Executing org.macports.build (ipe) :debug:build port disallows a parallel build :debug:build Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_ipe/ipe/work/.CC_PRINT_OPTIONS' CXXFLAGS='-arch x86_64' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6' LDFLAGS='-arch x86_64' :debug:build Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_ipe/ipe/work/ipe-7.0.14/src" && /usr/bin/make -w all IPEPREFIX=/opt/local MOC=/opt/local/bin/moc CXX=/usr/bin/g++-4.2' :debug:build Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_ipe/ipe/work/ipe-7.0.14/src" && /usr/bin/make -w all IPEPREFIX=/opt/local MOC=/opt/local/bin/moc CXX=/usr/bin/g++-4.2 :info:build make: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_ipe/ipe/work/ipe-7.0.14/src' :info:build /usr/bin/make --directory=ipelib all :info:build make[1]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_ipe/ipe/work/ipe-7.0.14/src/ipelib' :info:build mkdir -p ../../build/obj/ipelib; echo "" > ../../build/obj/ipelib/depend.mak; for f in ipebase.cpp ipeplatform.cpp ipegeo.cpp ipexml.cpp ipeattributes.cpp ipebitmap.cpp ipedct.cpp ipeshape.cpp ipegroup.cpp ipeimage.cpp ipetext.cpp ipepath.cpp ipereference.cpp ipeobject.cpp ipefactory.cpp ipestdstyles.cpp ipeiml.cpp ipepage.cpp ipepainter.cpp ipepdfparser.cpp ipepdfwriter.cpp ipepswriter.cpp ipestyle.cpp ipesnap.cpp ipeutils.cpp ipelatex.cpp ipedoc.cpp; do /usr/bin/g++-4.2 -MM -MT ../../build/obj/ipelib/${f%%.cpp}.o -I../include -DIPEFONTMAP=\"/opt/local/share/ipe/7.0.14/fontmap.xml\" $f >> ../../build/obj/ipelib/depend.mak; done :info:build make[1]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_ipe/ipe/work/ipe-7.0.14/src/ipelib' :info:build make[1]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_ipe/ipe/work/ipe-7.0.14/src/ipelib' :info:build Compiling ipebase.cpp... :info:build /usr/bin/g++-4.2 -arch x86_64 -Wall -g -O2 -fPIC -I../include -DIPEFONTMAP=\"/opt/local/share/ipe/7.0.14/fontmap.xml\" -c -o ../../build/obj/ipelib/ipebase.o ipebase.cpp :info:build Compiling ipeplatform.cpp... :info:build /usr/bin/g++-4.2 -arch x86_64 -Wall -g -O2 -fPIC -I../include -DIPEFONTMAP=\"/opt/local/share/ipe/7.0.14/fontmap.xml\" -c -o ../../build/obj/ipelib/ipeplatform.o ipeplatform.cpp :info:build Compiling ipegeo.cpp... :info:build /usr/bin/g++-4.2 -arch x86_64 -Wall -g -O2 -fPIC -I../include -DIPEFONTMAP=\"/opt/local/share/ipe/7.0.14/fontmap.xml\" -c -o ../../build/obj/ipelib/ipegeo.o ipegeo.cpp :info:build Compiling ipexml.cpp... :info:build /usr/bin/g++-4.2 -arch x86_64 -Wall -g -O2 -fPIC -I../include -DIPEFONTMAP=\"/opt/local/share/ipe/7.0.14/fontmap.xml\" -c -o ../../build/obj/ipelib/ipexml.o ipexml.cpp :info:build Compiling ipeattributes.cpp... :info:build /usr/bin/g++-4.2 -arch x86_64 -Wall -g -O2 -fPIC -I../include -DIPEFONTMAP=\"/opt/local/share/ipe/7.0.14/fontmap.xml\" -c -o ../../build/obj/ipelib/ipeattributes.o ipeattributes.cpp :info:build Compiling ipebitmap.cpp... :info:build /usr/bin/g++-4.2 -arch x86_64 -Wall -g -O2 -fPIC -I../include -DIPEFONTMAP=\"/opt/local/share/ipe/7.0.14/fontmap.xml\" -c -o ../../build/obj/ipelib/ipebitmap.o ipebitmap.cpp :info:build Compiling ipedct.cpp... :info:build /usr/bin/g++-4.2 -arch x86_64 -Wall -g -O2 -fPIC -I../include -DIPEFONTMAP=\"/opt/local/share/ipe/7.0.14/fontmap.xml\" -c -o ../../build/obj/ipelib/ipedct.o ipedct.cpp :info:build Compiling ipeshape.cpp... :info:build /usr/bin/g++-4.2 -arch x86_64 -Wall -g -O2 -fPIC -I../include -DIPEFONTMAP=\"/opt/local/share/ipe/7.0.14/fontmap.xml\" -c -o ../../build/obj/ipelib/ipeshape.o ipeshape.cpp :info:build Compiling ipegroup.cpp... :info:build /usr/bin/g++-4.2 -arch x86_64 -Wall -g -O2 -fPIC -I../include -DIPEFONTMAP=\"/opt/local/share/ipe/7.0.14/fontmap.xml\" -c -o ../../build/obj/ipelib/ipegroup.o ipegroup.cpp :info:build Compiling ipeimage.cpp... :info:build /usr/bin/g++-4.2 -arch x86_64 -Wall -g -O2 -fPIC -I../include -DIPEFONTMAP=\"/opt/local/share/ipe/7.0.14/fontmap.xml\" -c -o ../../build/obj/ipelib/ipeimage.o ipeimage.cpp :info:build Compiling ipetext.cpp... :info:build /usr/bin/g++-4.2 -arch x86_64 -Wall -g -O2 -fPIC -I../include -DIPEFONTMAP=\"/opt/local/share/ipe/7.0.14/fontmap.xml\" -c -o ../../build/obj/ipelib/ipetext.o ipetext.cpp :info:build Compiling ipepath.cpp... :info:build /usr/bin/g++-4.2 -arch x86_64 -Wall -g -O2 -fPIC -I../include -DIPEFONTMAP=\"/opt/local/share/ipe/7.0.14/fontmap.xml\" -c -o ../../build/obj/ipelib/ipepath.o ipepath.cpp :info:build Compiling ipereference.cpp... :info:build /usr/bin/g++-4.2 -arch x86_64 -Wall -g -O2 -fPIC -I../include -DIPEFONTMAP=\"/opt/local/share/ipe/7.0.14/fontmap.xml\" -c -o ../../build/obj/ipelib/ipereference.o ipereference.cpp :info:build Compiling ipeobject.cpp... :info:build /usr/bin/g++-4.2 -arch x86_64 -Wall -g -O2 -fPIC -I../include -DIPEFONTMAP=\"/opt/local/share/ipe/7.0.14/fontmap.xml\" -c -o ../../build/obj/ipelib/ipeobject.o ipeobject.cpp :info:build Compiling ipefactory.cpp... :info:build /usr/bin/g++-4.2 -arch x86_64 -Wall -g -O2 -fPIC -I../include -DIPEFONTMAP=\"/opt/local/share/ipe/7.0.14/fontmap.xml\" -c -o ../../build/obj/ipelib/ipefactory.o ipefactory.cpp :info:build Compiling ipestdstyles.cpp... :info:build /usr/bin/g++-4.2 -arch x86_64 -Wall -g -O2 -fPIC -I../include -DIPEFONTMAP=\"/opt/local/share/ipe/7.0.14/fontmap.xml\" -c -o ../../build/obj/ipelib/ipestdstyles.o ipestdstyles.cpp :info:build Compiling ipeiml.cpp... :info:build /usr/bin/g++-4.2 -arch x86_64 -Wall -g -O2 -fPIC -I../include -DIPEFONTMAP=\"/opt/local/share/ipe/7.0.14/fontmap.xml\" -c -o ../../build/obj/ipelib/ipeiml.o ipeiml.cpp :info:build Compiling ipepage.cpp... :info:build /usr/bin/g++-4.2 -arch x86_64 -Wall -g -O2 -fPIC -I../include -DIPEFONTMAP=\"/opt/local/share/ipe/7.0.14/fontmap.xml\" -c -o ../../build/obj/ipelib/ipepage.o ipepage.cpp :info:build Compiling ipepainter.cpp... :info:build /usr/bin/g++-4.2 -arch x86_64 -Wall -g -O2 -fPIC -I../include -DIPEFONTMAP=\"/opt/local/share/ipe/7.0.14/fontmap.xml\" -c -o ../../build/obj/ipelib/ipepainter.o ipepainter.cpp :info:build Compiling ipepdfparser.cpp... :info:build /usr/bin/g++-4.2 -arch x86_64 -Wall -g -O2 -fPIC -I../include -DIPEFONTMAP=\"/opt/local/share/ipe/7.0.14/fontmap.xml\" -c -o ../../build/obj/ipelib/ipepdfparser.o ipepdfparser.cpp :info:build Compiling ipepdfwriter.cpp... :info:build /usr/bin/g++-4.2 -arch x86_64 -Wall -g -O2 -fPIC -I../include -DIPEFONTMAP=\"/opt/local/share/ipe/7.0.14/fontmap.xml\" -c -o ../../build/obj/ipelib/ipepdfwriter.o ipepdfwriter.cpp :info:build Compiling ipepswriter.cpp... :info:build /usr/bin/g++-4.2 -arch x86_64 -Wall -g -O2 -fPIC -I../include -DIPEFONTMAP=\"/opt/local/share/ipe/7.0.14/fontmap.xml\" -c -o ../../build/obj/ipelib/ipepswriter.o ipepswriter.cpp :info:build Compiling ipestyle.cpp... :info:build /usr/bin/g++-4.2 -arch x86_64 -Wall -g -O2 -fPIC -I../include -DIPEFONTMAP=\"/opt/local/share/ipe/7.0.14/fontmap.xml\" -c -o ../../build/obj/ipelib/ipestyle.o ipestyle.cpp :info:build Compiling ipesnap.cpp... :info:build /usr/bin/g++-4.2 -arch x86_64 -Wall -g -O2 -fPIC -I../include -DIPEFONTMAP=\"/opt/local/share/ipe/7.0.14/fontmap.xml\" -c -o ../../build/obj/ipelib/ipesnap.o ipesnap.cpp :info:build Compiling ipeutils.cpp... :info:build /usr/bin/g++-4.2 -arch x86_64 -Wall -g -O2 -fPIC -I../include -DIPEFONTMAP=\"/opt/local/share/ipe/7.0.14/fontmap.xml\" -c -o ../../build/obj/ipelib/ipeutils.o ipeutils.cpp :info:build Compiling ipelatex.cpp... :info:build /usr/bin/g++-4.2 -arch x86_64 -Wall -g -O2 -fPIC -I../include -DIPEFONTMAP=\"/opt/local/share/ipe/7.0.14/fontmap.xml\" -c -o ../../build/obj/ipelib/ipelatex.o ipelatex.cpp :info:build Compiling ipedoc.cpp... :info:build /usr/bin/g++-4.2 -arch x86_64 -Wall -g -O2 -fPIC -I../include -DIPEFONTMAP=\"/opt/local/share/ipe/7.0.14/fontmap.xml\" -c -o ../../build/obj/ipelib/ipedoc.o ipedoc.cpp :info:build mkdir -p ../../build/lib :info:build /usr/bin/g++-4.2 -arch x86_64 -dynamiclib -Wl,-dylib_install_name,/opt/local/lib/libipe.so.7.0.14 -o ../../build/lib/libipe.so.7.0.14 ../../build/obj/ipelib/ipebase.o ../../build/obj/ipelib/ipeplatform.o ../../build/obj/ipelib/ipegeo.o ../../build/obj/ipelib/ipexml.o ../../build/obj/ipelib/ipeattributes.o ../../build/obj/ipelib/ipebitmap.o ../../build/obj/ipelib/ipedct.o ../../build/obj/ipelib/ipeshape.o ../../build/obj/ipelib/ipegroup.o ../../build/obj/ipelib/ipeimage.o ../../build/obj/ipelib/ipetext.o ../../build/obj/ipelib/ipepath.o ../../build/obj/ipelib/ipereference.o ../../build/obj/ipelib/ipeobject.o ../../build/obj/ipelib/ipefactory.o ../../build/obj/ipelib/ipestdstyles.o ../../build/obj/ipelib/ipeiml.o ../../build/obj/ipelib/ipepage.o ../../build/obj/ipelib/ipepainter.o ../../build/obj/ipelib/ipepdfparser.o ../../build/obj/ipelib/ipepdfwriter.o ../../build/obj/ipelib/ipepswriter.o ../../build/obj/ipelib/ipestyle.o ../../build/obj/ipelib/ipesnap.o ../../build/obj/ipelib/ipeutils.o ../../build/obj/ipelib/ipelatex.o ../../build/obj/ipelib/ipedoc.o -lz :info:build ln -sf libipe.so.7.0.14 ../../build/lib/libipe.so :info:build make[1]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_ipe/ipe/work/ipe-7.0.14/src/ipelib' :info:build /usr/bin/make --directory=ipelets/image all :info:build make[1]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_ipe/ipe/work/ipe-7.0.14/src/ipelets/image' :info:build mkdir -p ../../../build/obj/ipelets; echo "" > ../../../build/obj/ipelets/image.depend; for f in image.cpp; do /usr/bin/g++-4.2 -MM -MT ../../../build/obj/ipelets/${f%%.cpp}.o -I../../include -DQT_SHARED -I/opt/local/include -I/opt/local/include/QtGui -I/opt/local/include/QtCore $f >> ../../../build/obj/ipelets/image.depend; done :info:build make[1]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_ipe/ipe/work/ipe-7.0.14/src/ipelets/image' :info:build make[1]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_ipe/ipe/work/ipe-7.0.14/src/ipelets/image' :info:build Compiling image.cpp... :info:build /usr/bin/g++-4.2 -arch x86_64 -Wall -g -O2 -fPIC -I../../include -DQT_SHARED -I/opt/local/include -I/opt/local/include/QtGui -I/opt/local/include/QtCore -c -o ../../../build/obj/ipelets/image.o image.cpp :info:build mkdir -p ../../../build/ipelets :info:build /usr/bin/g++-4.2 -arch x86_64 -dynamiclib -o ../../../build/ipelets/image.so ../../../build/obj/ipelets/image.o -L../../../build/lib -lipe -L/opt/local/lib -lQtGui -lQtCore :info:build ld: warning: in /usr/lib/libipe.dylib, file was built for i386 which is not the architecture being linked (x86_64) :info:build Undefined symbols: :info:build "ipe::Page::append(ipe::TSelect, int, ipe::Object*)", referenced from: :info:build ImageIpelet::insertBitmap(QString) in image.o :info:build ImageIpelet::insertJpeg(QString) in image.o :info:build "ipe::Cascade::findLayout() const", referenced from: :info:build ImageIpelet::computeRect() in image.o :info:build "ipe::Bitmap::Bitmap(ipe::Bitmap const&)", referenced from: :info:build ImageIpelet::insertBitmap(QString) in image.o :info:build ImageIpelet::insertJpeg(QString) in image.o :info:build "ipe::Buffer::Buffer(ipe::Buffer const&)", referenced from: :info:build ImageIpelet::insertBitmap(QString) in image.o :info:build "ipe::Bitmap::~Bitmap()", referenced from: :info:build ImageIpelet::insertBitmap(QString) in image.o :info:build ImageIpelet::insertBitmap(QString) in image.o :info:build ImageIpelet::insertBitmap(QString) in image.o :info:build ImageIpelet::insertBitmap(QString) in image.o :info:build ImageIpelet::insertJpeg(QString) in image.o :info:build ImageIpelet::insertJpeg(QString) in image.o :info:build ImageIpelet::insertJpeg(QString) in image.o :info:build ImageIpelet::insertJpeg(QString) in image.o :info:build "ipe::Buffer::~Buffer()", referenced from: :info:build ImageIpelet::insertBitmap(QString) in image.o :info:build ImageIpelet::insertBitmap(QString) in image.o :info:build ImageIpelet::insertBitmap(QString) in image.o :info:build ImageIpelet::insertBitmap(QString) in image.o :info:build ImageIpelet::insertJpeg(QString) in image.o :info:build ImageIpelet::insertJpeg(QString) in image.o :info:build "ipeDebug(char const*, ...)", referenced from: :info:build ImageIpelet::insertBitmap(QString) in image.o :info:build ImageIpelet::insertBitmap(QString) in image.o :info:build ImageIpelet::insertBitmap(QString) in image.o :info:build ImageIpelet::insertBitmap(QString) in image.o :info:build "ipe::Vector::ZERO", referenced from: :info:build ImageIpelet::computeRect() in image.o :info:build "ipe::Page::deselectAll()", referenced from: :info:build ImageIpelet::insertBitmap(QString) in image.o :info:build ImageIpelet::insertJpeg(QString) in image.o :info:build "ipe::Bitmap::Bitmap(int, int, ipe::Bitmap::TColorSpace, int, ipe::Buffer, ipe::Bitmap::TFilter, bool)", referenced from: :info:build ImageIpelet::insertBitmap(QString) in image.o :info:build ImageIpelet::insertJpeg(QString) in image.o :info:build "ipe::Buffer::Buffer(int)", referenced from: :info:build ImageIpelet::insertBitmap(QString) in image.o :info:build "ipe::Buffer::Buffer(char const*, int)", referenced from: :info:build ImageIpelet::insertJpeg(QString) in image.o :info:build "ipe::Image::Image(ipe::Rect const&, ipe::Bitmap)", referenced from: :info:build ImageIpelet::insertBitmap(QString) in image.o :info:build ImageIpelet::insertJpeg(QString) in image.o :info:build "ipe::Bitmap::setColorKey(int)", referenced from: :info:build ImageIpelet::insertBitmap(QString) in image.o :info:build "ipe::Rect::Rect(ipe::Vector const&, ipe::Vector const&)", referenced from: :info:build ImageIpelet::computeRect() in image.o :info:build ImageIpelet::computeRect() in image.o :info:build "ipe::Ipelet::~Ipelet()", referenced from: :info:build ImageIpelet::~ImageIpelet()in image.o :info:build ImageIpelet::~ImageIpelet()in image.o :info:build ld: symbol(s) not found :info:build collect2: ld returned 1 exit status :info:build make[1]: * build/ipelets/image.so Error 1 :info:build make[1]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_ipe/ipe/work/ipe-7.0.14/src/ipelets/image' :info:build make: * [ipelets/image] Error 2 :info:build make: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_ipe/ipe/work/ipe-7.0.14/src' :info:build shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_ipe/ipe/work/ipe-7.0.14/src" && /usr/bin/make -w all IPEPREFIX=/opt/local MOC=/opt/local/bin/moc CXX=/usr/bin/g++-4.2 " returned error 2 :error:build Target org.macports.build returned: shell command failed (see log for details) :debug:build Backtrace: shell command failed (see log for details)

while executing

"command_exec build"

(procedure "portbuild::build_main" line 8) invoked from within

"$procedure $targetname" :info:build Warning: the following items did not execute (for ipe): org.macports.activate org.macports.build org.macports.destroot org.macports.install :notice:build Log for ipe is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_ipe/ipe/main.log

Change History (2)

comment:1 Changed 13 years ago by blb@…

Resolution: duplicate
Status: newclosed

Dup of #31564.

comment:2 Changed 13 years ago by mf2k (Frank Schima)

Keywords: ipe removed
Priority: HighNormal
Type: requestdefect
Note: See TracTickets for help on using tickets.