libgeier @0.13 Processing of port libgeier failed

[o1542217@…]

Installation of the taxbird @0.18 port fails because of libgeier installation. Cleaning all ports and removing disabled ports didn't solve the problem.

My Config: OSX 10.8.2 with Xcode 4.5.1 and most recent CommandLineTools.

Attached is the libgeier @0.13 Installation log file:

version:1
:debug:main epoch: in tree: 0 installed: 0
:debug:main pkgconfig 0.27.1_1 exists in the ports tree
:debug:main pkgconfig 0.27.1_1  is the latest installed
:debug:main pkgconfig 0.27.1_1  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/pkgconfig
:debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! pkgconfig 0.27.1_1 >= pkgconfig 0.27.1_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main libiconv 1.14_0 exists in the ports tree
:debug:main libiconv 1.14_0  is the latest installed
:debug:main libiconv 1.14_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libiconv
:debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libxml2 2.8.0_0 exists in the ports tree
:debug:main libxml2 2.8.0_0  is the latest installed
:debug:main libxml2 2.8.0_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libxml2
:debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! libxml2 2.8.0_0 >= libxml2 2.8.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main zlib 1.2.7_0 exists in the ports tree
:debug:main zlib 1.2.7_0  is the latest installed
:debug:main zlib 1.2.7_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/zlib
:debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! zlib 1.2.7_0 >= zlib 1.2.7_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xz 5.0.4_0 exists in the ports tree
:debug:main xz 5.0.4_0  is the latest installed
:debug:main xz 5.0.4_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/xz
:debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xz 5.0.4_0 >= xz 5.0.4_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main gettext 0.18.1.1_2 exists in the ports tree
:debug:main gettext 0.18.1.1_2  is the latest installed
:debug:main gettext 0.18.1.1_2  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gettext
:debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main ncurses 5.9_1 exists in the ports tree
:debug:main ncurses 5.9_1  is the latest installed
:debug:main ncurses 5.9_1  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/ncurses
:debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main expat 2.1.0_0 exists in the ports tree
:debug:main expat 2.1.0_0  is the latest installed
:debug:main expat 2.1.0_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/expat
:debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! expat 2.1.0_0 >= expat 2.1.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libxslt 1.1.26_0 exists in the ports tree
:debug:main libxslt 1.1.26_0  is the latest installed
:debug:main libxslt 1.1.26_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libxslt
:debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! libxslt 1.1.26_0 >= libxslt 1.1.26_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xmlsec 1.2.18_0 exists in the ports tree
:debug:main xmlsec 1.2.18_0  is the latest installed
:debug:main xmlsec 1.2.18_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/security/xmlsec
:debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main universal_variant is false, so not adding the default universal variant
:debug:main No need to upgrade! xmlsec 1.2.18_0 >= xmlsec 1.2.18_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libtool 2.4.2_3 exists in the ports tree
:debug:main libtool 2.4.2_3  is the latest installed
:debug:main libtool 2.4.2_3  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libtool
:debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! libtool 2.4.2_3 >= libtool 2.4.2_3
:debug:main epoch: in tree: 0 installed: 0
:debug:main libgcrypt 1.5.0_0 exists in the ports tree
:debug:main libgcrypt 1.5.0_0  is the latest installed
:debug:main libgcrypt 1.5.0_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libgcrypt
:debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! libgcrypt 1.5.0_0 >= libgcrypt 1.5.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libgpg-error 1.10_0 exists in the ports tree
:debug:main libgpg-error 1.10_0  is the latest installed
:debug:main libgpg-error 1.10_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libgpg-error
:debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! libgpg-error 1.10_0 >= libgpg-error 1.10_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main gnutls 2.12.19_0 exists in the ports tree
:debug:main gnutls 2.12.19_0  is the latest installed
:debug:main gnutls 2.12.19_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gnutls
:debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! gnutls 2.12.19_0 >= gnutls 2.12.19_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libtasn1 2.11_0 exists in the ports tree
:debug:main libtasn1 2.11_0  is the latest installed
:debug:main libtasn1 2.11_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libtasn1
:debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! libtasn1 2.11_0 >= libtasn1 2.11_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main lzo2 2.05_1 exists in the ports tree
:debug:main lzo2 2.05_1  is the latest installed
:debug:main lzo2 2.05_1  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/lzo2
:debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! lzo2 2.05_1 >= lzo2 2.05_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main readline 6.2.000_0 exists in the ports tree
:debug:main readline 6.2.000_0  is the latest installed
:debug:main readline 6.2.000_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/readline
:debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! readline 6.2.000_0 >= readline 6.2.000_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main nss 3.13.3_1 exists in the ports tree
:debug:main nss 3.13.3_1  is the latest installed
:debug:main nss 3.13.3_1  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/net/nss
:debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main universal_variant is false, so not adding the default universal variant
:debug:main No need to upgrade! nss 3.13.3_1 >= nss 3.13.3_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main nspr 4.8.9_0 exists in the ports tree
:debug:main nspr 4.8.9_0  is the latest installed
:debug:main nspr 4.8.9_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/nspr
:debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! nspr 4.8.9_0 >= nspr 4.8.9_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main sqlite3 3.7.14_1 exists in the ports tree
:debug:main sqlite3 3.7.14_1  is the latest installed
:debug:main sqlite3 3.7.14_1  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/sqlite3
:debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! sqlite3 3.7.14_1 >= sqlite3 3.7.14_1
:debug:main epoch: in tree: 20090923 installed: 20090923
:debug:main libedit 20120601-3.0_0 exists in the ports tree
:debug:main libedit 20120601-3.0_0  is the latest installed
:debug:main libedit 20120601-3.0_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libedit
:debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! libedit 20120601-3.0_0 >= libedit 20120601-3.0_0
:debug:main epoch: in tree: 1 installed: 1
:debug:main openssl 1.0.1c_0 exists in the ports tree
:debug:main openssl 1.0.1c_0  is the latest installed
:debug:main openssl 1.0.1c_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/openssl
:debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! openssl 1.0.1c_0 >= openssl 1.0.1c_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main argp-standalone 1.3_1 exists in the ports tree
:debug:main argp-standalone 1.3_1  is the latest installed
:debug:main argp-standalone 1.3_1  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/argp-standalone
:debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! argp-standalone 1.3_1 >= argp-standalone 1.3_1
:msg:main --->  Computing dependencies for libgeier:info:main .:debug:main libgeier has no conflicts
:debug:main Searching for dependency: pkgconfig
:debug:main Found Dependency: receipt exists for pkgconfig
:debug:main Searching for dependency: libxml2
:debug:main Found Dependency: receipt exists for libxml2
:debug:main Searching for dependency: libxslt
:debug:main Found Dependency: receipt exists for libxslt
:debug:main Searching for dependency: xmlsec
:debug:main Found Dependency: receipt exists for xmlsec
:debug:main Searching for dependency: nss
:debug:main Found Dependency: receipt exists for nss
:debug:main Searching for dependency: nspr
:debug:main Found Dependency: receipt exists for nspr
:debug:main Searching for dependency: argp-standalone
:debug:main Found Dependency: receipt exists for argp-standalone
:msg:main 
:debug:main Executing org.macports.main (libgeier)
:debug:main changing euid/egid - current euid: 0 - current egid: 0
:debug:main egid changed to: 501
:debug:main euid changed to: 501
:debug:main Skipping completed org.macports.archivefetch (libgeier)
:debug:main Privilege de-escalation not attempted as not running as root.
:debug:main Skipping completed org.macports.fetch (libgeier)
:debug:main Privilege de-escalation not attempted as not running as root.
:debug:main Skipping completed org.macports.checksum (libgeier)
:debug:main Privilege de-escalation not attempted as not running as root.
:debug:main Skipping completed org.macports.extract (libgeier)
:debug:main Privilege de-escalation not attempted as not running as root.
:debug:main Skipping completed org.macports.patch (libgeier)
:debug:main Privilege de-escalation not attempted as not running as root.
:debug:main Skipping completed org.macports.configure (libgeier)
:debug:main Privilege de-escalation not attempted as not running as root.
:debug:build build phase started at Thu Oct 11 21:39:52 CEST 2012
:notice:build --->  Building libgeier
:debug:build Executing org.macports.build (libgeier)
:debug:build Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_finance_libgeier/libgeier/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.8'
:debug:build Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_finance_libgeier/libgeier/work/libgeier-0.13" && /usr/bin/make -j8 -w all'
:debug:build Executing command line:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_finance_libgeier/libgeier/work/libgeier-0.13" && /usr/bin/make -j8 -w all 
:info:build make: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_finance_libgeier/libgeier/work/libgeier-0.13'
:info:build Making all in src
:info:build make[1]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_finance_libgeier/libgeier/work/libgeier-0.13/src'
:info:build /usr/bin/make  all-recursive
:info:build make[2]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_finance_libgeier/libgeier/work/libgeier-0.13/src'
:info:build Making all in openssl
:info:build make[3]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_finance_libgeier/libgeier/work/libgeier-0.13/src/openssl'
:info:build make[3]: Nothing to be done for `all'.
:info:build make[3]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_finance_libgeier/libgeier/work/libgeier-0.13/src/openssl'
:info:build make[3]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_finance_libgeier/libgeier/work/libgeier-0.13/src'
:info:build /usr/bin/clang -DHAVE_CONFIG_H -I.  -I../include -I../include -I../src/openssl -DDEFAULT_XMLSEC_TEMPLATE=\"/opt/local/share/libgeier/xmlsec.tmpl\" -DDEFAULT_CERT_FILE=\"/opt/local/share/libgeier/Elster2Cry.b64.cer\" -DDEFAULT_SCHEMA_DIR_URL=\"file:///opt/local/share/libgeier/schemas\" -DDEFAULT_STYLESHEET_DIR_URL=\"file:///opt/local/share/libgeier/stylesheets\" -DDEFAULT_CLEARING_TIMEOUT=30000 -I/opt/local/include  -pipe -O2 -I/opt/local/include/nss -I/opt/local/include/nspr -D__XMLSEC_FUNCTION__=__FUNCTION__ -DXMLSEC_NO_SIZE_T -DXMLSEC_NO_GOST=1 -DXMLSEC_NO_XKMS=1 -DXMLSEC_DL_LIBLTDL=1, -I/opt/local/include/xmlsec1 -I/opt/local/include/libxml2 -I/opt/local/include -I/opt/local/include/nss -I/opt/local/include/nspr -DXMLSEC_CRYPTO_NSS=1 -DXMLSEC_CRYPTO=\"nss\" -arch x86_64 -I/opt/local/include/libxml2   -I/opt/local/include -I/opt/local/include/libxml2   -DXMLSEC_CRYPTO=\"openssl\" -D__XMLSEC_FUNCTION__=__FUNCTION__ -DXMLSEC_NO_SIZE_T -DXMLSEC_NO_GOST=1 -DXMLSEC_NO_XKMS=1 -DXMLSEC_DL_LIBLTDL=1, -DXMLSEC_OPENSSL_098=1 -DXMLSEC_CRYPTO_OPENSSL=1 -I/opt/local/include/xmlsec1 -I/opt/local/include -I/opt/local/include/libxml2   -MT geier.o -MD -MP -MF .deps/geier.Tpo -c -o geier.o geier.c
:info:build In file included from <built-in>:147:
:info:build <command line>:14:9: warning: 'XMLSEC_CRYPTO' macro redefined
:info:build #define XMLSEC_CRYPTO "openssl"
:info:build         ^
:info:build <command line>:13:9: note: previous definition is here
:info:build #define XMLSEC_CRYPTO "nss"
:info:build         ^
:info:build geier.c:140:6: error: redefinition of 'pincode' with a different type
:info:build char pincode[24];                       /* pincode */
:info:build      ^
:info:build geier.c:137:7: note: previous definition is here
:info:build char *pincode = NULL;                   /* pincode */
:info:build       ^
:info:build 1 warning and 1 error generated.
:info:build make[3]: *** [geier.o] Error 1
:info:build make[3]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_finance_libgeier/libgeier/work/libgeier-0.13/src'
:info:build make[2]: *** [all-recursive] Error 1
:info:build make[2]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_finance_libgeier/libgeier/work/libgeier-0.13/src'
:info:build make[1]: *** [all] Error 2
:info:build make[1]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_finance_libgeier/libgeier/work/libgeier-0.13/src'
:info:build make: *** [all-recursive] Error 1
:info:build make: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_finance_libgeier/libgeier/work/libgeier-0.13'
:info:build Command failed:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_finance_libgeier/libgeier/work/libgeier-0.13" && /usr/bin/make -j8 -w all 
:info:build Exit code: 2
:error:build org.macports.build for port libgeier returned: command execution failed
:debug:build Error code: CHILDSTATUS 49555 2
:debug:build Backtrace: command execution failed
    while executing
"system -nice 0 $fullcmdstring"
    ("eval" body line 1)
    invoked from within
"eval system $notty $nice \$fullcmdstring"
    invoked from within
"command_exec build"
    (procedure "portbuild::build_main" line 8)
    invoked from within
"$procedure $targetname"
:info:build Warning: targets not executed for libgeier: org.macports.activate org.macports.build org.macports.destroot org.macports.install
:notice:build Please see the log file for port libgeier for details:
    /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_finance_libgeier/libgeier/main.log