Timeline
09/26/08:
- 23:56 Changeset [40245] by
- goffice: whitespace changes only
- 23:52 Ticket #16656 (Updated swi-prolog portfile for version 5.6.61) closed by
- fixed: Updated in r40244. Thanks!
- 23:52 Changeset [40244] by
- swi-prolog: maintainer update to 5.6.61; closes #16656
- 23:51 Ticket #16622 (libgsf 1.14.9) closed by
- fixed: Thanks for the update! I applied it in r40243, though I did not remove the …
- 23:51 Changeset [40243] by
- libgsf: update to 1.14.9; closes #16622
- 22:37 Ticket #15057 (gv binary is not installed by gv 3.6.3_0 port) closed by
- fixed: This was an upstream problem. The install didn't work right on …
- 22:29 Ticket #15057 (gv binary is not installed by gv 3.6.3_0 port) reopened by
- 17:24 Changeset [40242] by
- gv: I'll be maintainer if nobody else wants to
- 17:15 Changeset [40241] by
- gv: update to 3.6.6, including patch from …
- 17:07 Changeset [40240] by
- * ikiwiki: new upstream release
- 16:46 Ticket #16661 (neither pango nor pango-devel are compatible with cairo@1.8.0_0) closed by
- fixed: Updated pango to 1.22.0 in r40239. Thanks for the report, and sorry for …
- 16:45 Changeset [40239] by
- pango: update to 1.22.0; closes #16661
- 15:10 Changeset [40238] by
- pango-devel: glib2 2.18 is out so we no longer need to recommend using …
- 15:08 Changeset [40237] by
- glib2: update to 2.18.1 and enable test suite
- 14:50 Changeset [40236] by
- p5-module-build: increase epoch so MacPorts considers "30" to be larger …
- 14:20 Changeset [40235] by
- Updated to 0.07.
- 14:16 Ticket #16663 (fontforge_full-20080110.tar.bz2 Error: Target org.macports.checksum ...) created by
- […] MacPorts 1.6.0 installed from package. Thanks.
- 14:16 Changeset [40234] by
- Updated to 0.35.
- 14:14 Changeset [40233] by
- Updated to 5.815.
- 14:12 Changeset [40232] by
- Updated to 0.30. The epoch should have been increased; see r40236.
- 14:09 Changeset [40231] by
- Updated to 0.34.
- 14:07 Ticket #15841 (glib2 and glib2-devel) closed by
- invalid: Closing due to no feedback. Please re-open if there is still a problem.
- 12:54 Changeset [40230] by
- Total number of ports parsed: 5046 Ports successfully parsed: 5046 …
- 11:33 Ticket #16662 (arm-none-linux-gnueabi-gcc error) created by
- I get this error when I try to install arm-none-linux-gnueabi-gcc would …
- 11:16 Changeset [40229] by
- rb-password: de-lint
- 11:00 Ticket #16661 (neither pango nor pango-devel are compatible with cairo@1.8.0_0) created by
- After installing cairo@1.8.0_0, pango-devel fails to build with the …
- 10:23 Changeset [40228] by
- New upstream 2.7.2.RC2 release of Scala.
- 08:21 Ticket #16660 (rb-password and cracklib) created by
- […] if I cd in and do a […] then successfully it builds off the …
- 08:19 Ticket #16659 (RPM-4.4.9 build error - Error: Status 1 encountered during processing) created by
- […]
- 07:42 Ticket #16617 (py25-clientform dependencies) closed by
- fixed: Fixed in r40227
- 07:40 Changeset [40227] by
- Updated ClientForm to 0.2.9
- 07:21 Ticket #16658 (py25-mechanize checksum fails) closed by
- fixed: Fixed in r40226
- 07:18 Changeset [40226] by
- Updated python mechanize to 0.1.9
- 03:01 Changeset [40225] by
- spidermonkey: parallel build doesn't work
- 00:53 Changeset [40224] by
- Total number of ports parsed: 5046 Ports successfully parsed: 5046 …
- 00:26 Changeset [40223] by
- Xaw3d: enable parallel build
- 00:26 Changeset [40222] by
- Xaw3d: fix destroot phase so you don't need to be root to install it
- 00:23 Changeset [40221] by
- Xaw3d: whitespace changes only
09/25/08:
- 21:20 Ticket #16658 (py25-mechanize checksum fails) created by
- full updated and synced and py25-mechanize fails checksum. portfile has …
- 21:13 Ticket #16630 (libksba update to latest version 1.0.4) closed by
- fixed: Committed revision r40220.
- 21:13 Changeset [40220] by
- Updated to version 1.0.4. Closes ticket #16630.
- 20:25 Changeset [40219] by
- pango-devel: cairo 1.8.0 is out so we no longer need to recommend …
- 20:15 Changeset [40218] by
- pure: update to 0.7 All tests passed
- 20:04 Changeset [40217] by
- cairo: update to 1.8.0
- 20:02 Changeset [40216] by
- Updtated ToDo.txt with list of things that needed to be done. Added macros …
- 19:26 Ticket #16633 (rdesktop upgrade) closed by
- fixed: Committed in r40215.
- 19:25 Changeset [40215] by
- rdesktop: update to version 1.6.0 (#16633)
- 17:39 Ticket #16657 (Updated swi-prolog-lite portfile for version 5.6.61) created by
- Updated swi-prolog-lite portfile for version 5.6.61.
- 17:37 Ticket #16656 (Updated swi-prolog portfile for version 5.6.61) created by
- Updated swi-prolog portfile for version 5.6.61.
- 16:28 Ticket #16655 (libxslt update to 1.1.24) created by
- Attached patch updates textproc/libxslt to latest 1.1.24. Also, this one …
- 16:03 Ticket #16654 (Update hs-cabal to 0.5.2) created by
- The attached patch bumps hs-cabal to 0.5.2
- 14:49 Ticket #16653 (incorrect sh-bang in meld) created by
- The #! at the top of the meld python program invokes /usr/bin/env …
- 14:43 Ticket #16651 (Update rdesktop to 1.6.0) closed by
- duplicate: Dup of #16633.
- 14:43 Ticket #16650 (Update rdesktop to 1.6.0) closed by
- duplicate: Dup of #16633.
- 12:54 Changeset [40214] by
- Total number of ports parsed: 5046 Ports successfully parsed: 5046 …
- 12:43 Ticket #16479 (checksum mismatch for fontforge) closed by
- fixed: Fixed in r40213.
- 12:38 Changeset [40213] by
- fontforge: change checksums for unversioned cidmaps tarball to match …
- 11:42 Ticket #16652 (Error in execution of built deluge, Fatal Python error: Interpreter not ...) created by
- I have now successfully (seeminlgly) built deluge, but now there is an …
- 09:21 Ticket #16646 (libxml2 update to version 2.7.1) closed by
- fixed: Committed in r40212.
- 09:21 Changeset [40212] by
- libxml2: update to version 2.7.1 (#16646)
- 08:58 Ticket #16647 (Problems installing Wine in Terminal and Porticus) closed by
- duplicate: As you noted, this has already been reported as #16479. If you have new …
- 08:53 Ticket #16651 (Update rdesktop to 1.6.0) created by
- Update the rdesktop port for rdesktop 1.6.0.
- 08:52 Ticket #16650 (Update rdesktop to 1.6.0) created by
- Update the rdesktop port for rdesktop 1.6.0.
- 08:41 Ticket #16641 (boost_python-mt problem when compiling deluge) closed by
- duplicate: Calling this a duplicate of #126, as deluge does indeed need …
- 08:00 Ticket #16649 (pmd-3.9 Fails to build) created by
- This is the output to the terminal when I first ran the command.I've also …
- 06:30 Ticket #16648 (lbdb 0.36_0 build error) created by
- When I attempt to upgrade from 0.34_0 to 0.36_0, the build fails at the …
- 04:53 Ticket #16558 (Add xml2 and pgcrypto to postgresql81) closed by
- fixed: thanks, committed alongside the update to 8.1.14;
- 04:51 Changeset [40211] by
- version 8.1.14, add xml2, pgcrypto & dblink support (#16558)
- 04:36 Ticket #15452 (openssl: enable parallel build) closed by
- fixed: I've marked the port as 'use_parallel_build no' as the added complexity by …
- 04:34 Changeset [40210] by
- mark as 'not reliably building in parallel' (see #15452)
- 04:32 Ticket #15163 (sqlite3: add tcl variant) closed by
- invalid: yes -- the tcl-sqlite3 port makes this request obsolete.
- 02:59 Changeset [40209] by
- New port: graphics/svg2pdf
- 02:59 Changeset [40208] by
- New port: graphics/libsvg-cairo
- 02:59 Changeset [40207] by
- New port: graphics/libsvg
- 02:55 Changeset [40206] by
- version 5.9.0
- 02:54 Changeset [40205] by
- version 2008-09-24
- 02:51 Changeset [40204] by
- version 8.2.10
- 02:25 Ticket #4559 (BUG: compile error when installing postgresql8 after unixODBC) closed by
- fixed: Commited the patch from mcalhoun; thanks! …
- 02:22 Changeset [40203] by
- fix compilation error if unixODBC is installed (#4559, solution by …
- 01:59 Changeset [40202] by
- ImageMagick: update to 6.4.3-9 All 699 tests behaved as expected (33 …
- 01:57 Ticket #16647 (Problems installing Wine in Terminal and Porticus) created by
- I am having a similar problem to this thread: …
- 01:40 Ticket #16646 (libxml2 update to version 2.7.1) created by
- Attached patch updates textproc/libxml2 to the current version, 2.7.1. …
- 01:20 Changeset [40201] by
- graphviz-devel: update to 2.21.20080925.0445
- 01:17 Ticket #16645 (rdesktop-devel build failure) created by
- I get a failure when trying to build rdesktop-devel. This is the same as …
- 01:13 Ticket #16644 (enhancement: +dtrace for Python) created by
- This kind soul has seperated out the dtrace specific Apple modifications …
- 00:55 Ticket #16643 (ecl-0.9i upgrade to 0.9l) created by
- The version of ecl port is way outdated. I attach the patch which …
- 00:51 Changeset [40200] by
- Total number of ports parsed: 5043 Ports successfully parsed: 5043 …
09/24/08:
- 21:59 Ticket #16642 (SLIB port update to version 3b1) created by
- The latest SLIB is 3b1, but MacPorts only has 3a3. The attached Portfile …
- 20:37 Ticket #16635 (Problem with subversion-javahlbindings 1.5.2 and junit) closed by
- worksforme
- 19:17 Ticket #16639 (py25-numpy fails causing deluge to not install) closed by
- invalid
- 19:01 Ticket #16641 (boost_python-mt problem when compiling deluge) created by
- I run into a problem with boost_python-mt when building deluge. I just …
- 17:34 Changeset [40199] by
- master site has gone away; transfer to distfiles.macports.org (using old …
- 14:49 Changeset [40198] by
- version 1.4
- 13:53 Ticket #16638 (cairo fetch failure) closed by
- worksforme: Agreed. It worked fine for me just now.
- 13:14 Ticket #16640 (ecl-0.9i build and install errors) created by
- The ecl port has actually two issues: one is ecl itself not finding gmp …
- 12:51 Changeset [40197] by
- Total number of ports parsed: 5043 Ports successfully parsed: 5043 …
- 12:44 Ticket #16639 (py25-numpy fails causing deluge to not install) created by
- I get the following error when I try to 'sudo port install deluge': […] …
- 12:43 Ticket #16638 (cairo fetch failure) created by
- When trying to install Dia I encounter an error when it tries to grab …
- 12:36 Ticket #16637 (mtr 0.75) created by
- Please find attached a new Portfile for mtr 0.75. I believe it doesn't …
- 12:14 Ticket #16636 (imlib2-1.2.2 update to 1.4.1) created by
- Update imlib2 from 1.2.2 to 1.4.1 (released 2008-06-07)
- 11:48 Changeset [40196] by
- ReadMe.txt: add a few notes and clarifications on the usage
- 09:57 Changeset [40195] by
- deluge: add missing py25-setuptools dependency
- 09:57 Ticket #16635 (Problem with subversion-javahlbindings 1.5.2 and junit) created by
- Getting the following in my log when failing to upgrade subversion to …
- 08:46 Changeset [40194] by
- version bump to 2.8.9
- 07:40 Ticket #16634 (__gnu_inline__ attribute directive and Apple's gcc) created by
- I am trying to build the MLton SML compiler (http://mlton.org), which uses …
- 06:55 Changeset [40193] by
- Updated to 2.10.7.
- 06:53 Changeset [40192] by
- Updated to 0.58.
- 06:50 Changeset [40191] by
- Updated to 0.66.
- 05:05 Changeset [40190] by
- Updated simplejson
- 04:54 Changeset [40189] by
- Updated Beaker
- 04:06 Ticket #16633 (rdesktop upgrade) created by
- With 10.5.5 and Xquartz 2.3.1 rdesktop 1.5.0 frequently segfaults. …
- 03:00 Ticket #16632 (glib2 reinstalls multiple times on port upgrade -f gnumeric (and crashes)) created by
- I tried doing a "port upgrade -f gnumeric". This naturally takes a long …
- 01:19 Ticket #16631 (Add libstemmer variant to Sphinx port) created by
- Sphinx can be built with support for libstemmer which adds stemming …
- 00:51 Changeset [40188] by
- Total number of ports parsed: 5043 Ports successfully parsed: 5043 …
- 00:16 XcodeVersionInfo edited by
- Add Apple build numbers for those I have (diff)
09/23/08:
- 23:40 XcodeVersionInfo created by
- Add new page documenting Xcode version stuff
- 22:53 Changeset [40187] by
- Add newline to meet lint requirements
- 22:53 Changeset [40186] by
- Add newline to meet lint requirements
- 22:49 Changeset [40185] by
- * Add emacs/vim modeline * Replace my maintainer address with macports …
- 22:49 Changeset [40184] by
- * Add emacs/vim modeline * Replace my maintainer address with macports …
- 22:48 Changeset [40183] by
- * Add emacs/vim modeline * Replace my maintainer address with macports …
- 22:48 Changeset [40182] by
- * Add emacs/vim modeline * Replace my maintainer address with macports …
- 22:48 Changeset [40181] by
- * Add emacs/vim modeline * Replace my maintainer address with macports …
- 22:37 Changeset [40180] by
- Add emacs/vim modeline
- 22:37 Changeset [40179] by
- Add emacs/vim modeline
- 22:37 Changeset [40178] by
- Add emacs/vim modeline
- 22:37 Changeset [40177] by
- Add emacs/vim modeline
- 22:22 Changeset [40176] by
- * Version bump to 0.15.1 * Replace my maintainer address with macports …
- 22:21 Changeset [40175] by
- * Version bump to 0.15.1 * Replace my maintainer address with macports …
- 22:19 Changeset [40174] by
- Version bump to 0.17.3 to match py-logilab-astng
- 19:50 Ticket #16630 (libksba update to latest version 1.0.4) created by
- Attached patch updated devel/libksba to 1.0.4.
- 18:47 MacPortsDevelopers edited by
- (diff)
- 17:40 MacPortsDevelopers edited by
- (diff)
- 15:48 Ticket #16629 (bacula - postgresql83, mysql5 and mysql4 variants do not build) closed by
- fixed: Thanks to blb, the postgresql83, mysql5 and mysql4 (untested though) …
- 15:44 Changeset [40173] by
- Fixed the postgresql83, mysql5 and mysql4 variants. Thanks to blb for …
- 13:33 Changeset [40172] by
- version bump, nmap to 4.76
- 13:09 Ticket #16629 (bacula - postgresql83, mysql5 and mysql4 variants do not build) created by
- when installaing bacula with postgresql or mysql we've got the error below …
- 12:52 Changeset [40171] by
- Total number of ports parsed: 5043 Ports successfully parsed: 5043 …
- 12:03 Changeset [40170] by
- ImageMagick: update to 6.4.3-8 All 699 tests behaved as expected (33 …
- 10:42 macsforever2000 edited by
- (diff)
- 09:46 macsforever2000 edited by
- (diff)
- 09:45 Ticket #16628 (py25-tkinter build failure) closed by
- duplicate: This is the [http://trac.macports.org/wiki/LeopardProblems Leopard TCL …
- 09:10 Ticket #16628 (py25-tkinter build failure) created by
- Hi, I installed python 2.5 without problems, then tried to install …
- 07:42 Ticket #16627 (rtf2latex2eUnix-1.0fc1 Configure error - build failure) created by
- I am unable to build the port for rtf2latex2e under Mac OS 10.5.5 (only OS …
- 03:35 Changeset [40169] by
- version 8.3.4
- 00:52 Changeset [40168] by
- Total number of ports parsed: 5043 Ports successfully parsed: 5043 …
- 00:25 Ticket #13356 (XMMS2 Portfile) closed by
- fixed: I finally added an xmms2 port in r40167. I based it on the one submitted …
- 00:20 Changeset [40167] by
- xmms2: new port, version 0.5DrLecter; closes #13356
09/22/08:
- 21:18 Ticket #16560 (netpbm fails a parallel build) closed by
- fixed: I sent an email to developer Bryan Henderson (there is no bug tracker or …
- 20:57 Changeset [40166] by
- * Version bump to 0.17.3 * Replace my maintainer address with macports …
- 20:14 Changeset [40165] by
- python/py25-construct: Re-add RCS $Id$ tag
- 20:11 Ticket #16568 (Submitting new port: py25-construct) closed by
- fixed: Committed in r40164. Thanks for your submission.
- 20:11 Changeset [40164] by
- python/py25-construct: New port: py25-construct, based on py-construct …
- 20:01 Changeset [40163] by
- imlib: * Allow building with giflib. 1. If libungif already exists, it …
- 19:45 Ticket #15878 (mftrace 1.2.14 failing build) closed by
- fixed: Committed patch in r40162. Also incremented revision for the new …
- 19:44 Changeset [40162] by
- graphics/mftrace: Applying patch from blb: * Use port: style deps * …
- 19:42 Ticket #16523 (pdflib 7.0.3 does not build if ccache is enabled) closed by
- fixed: Disabled ccache in r40161. Thanks for the report.
- 19:42 Changeset [40161] by
- print/pdflib: Disable ccache, closes #16523
- 19:33 Ticket #15339 (rsync 3.0.2 does not build on Darwin 7 (Mac OS X 10.3 Panther); fix ...) closed by
- fixed: Marking as fixed per comment 4.
- 19:24 Ticket #16538 (uade2 2.12 port update) closed by
- fixed: Committed in r40160.
- 19:23 Changeset [40160] by
- audio/uade2: Maintainer update to version 2.12 New variant +xmms Closes …
- 19:01 Ticket #16626 (Update qt4-mac 4.4.1 to 4.4.2) created by
- Please update qt4-mac 4.4.1 to 4.4.2.
- 18:59 Ticket #16625 (Update qt4-x11 4.4.0 to 4.4.2) created by
- Please update qt4-x11 4.4.0 to 4.4.2.
- 18:59 Ticket #16624 (Goffice 0.7.1) created by
- Goffice 0.7.1 update patch
- 18:54 Ticket #16623 (Mod_security 2) created by
- Mod_security module version 2.5.6 for Apache2
- 18:49 Ticket #16622 (libgsf 1.14.9) created by
- updated version of libgsf to 1.14.9
- 18:12 Changeset [40159] by
- Run dep_map_clean.tcl *after* installing, so it works on new installs.
- 16:48 Ticket #16572 (Clojure port) closed by
- fixed: Thanks! I committed the port in r40157 with some minor changes, and one …
- 16:48 Changeset [40158] by
- clojure: simplify destroot using xinstall instead of file
- 16:43 Changeset [40157] by
- clojure: new port, version 20080916; closes #16572
- 16:30 howto/MAMP edited by
- Restart apache and provide your MYSQL root password! (diff)
- 16:21 macsforever2000 edited by
- (diff)
- 16:20 macsforever2000 edited by
- (diff)
- 16:19 macsforever2000 edited by
- (diff)
- 16:15 macsforever2000 edited by
- (diff)
- 16:15 macsforever2000 edited by
- (diff)
- 16:11 Changeset [40156] by
- ImageMagick: update to 6.4.3-7 All 699 tests behaved as expected (33 …
- 16:03 Ticket #16621 (libpqxx) closed by
- fixed: Thanks. I added the port in r40155 with some minor changes. * I added a …
- 15:58 Changeset [40155] by
- libpqxx: new port, version 2.6.9; closes #16621
- 15:23 Ticket #16613 (vtk5 5.2.0) closed by
- fixed: I jumped the gun a bit and updated the port to 5.2.0 in r40154 without …
- 15:19 Changeset [40154] by
- vtk5: update to 5.2.0; see #16613
- 15:13 Ticket #16621 (libpqxx) created by
- To my knowledge, this a new macport for libpqxx, version 2.6.9, and …
- 15:11 Ticket #16620 (libptp2 update from version 1.1.0 to 1.1.10) created by
- Attached you'll find a patch for the current libptp2 Portfile to update it …
- 15:04 howto/MAMP edited by
- Beginners will understand more (diff)
- 14:19 Changeset [40153] by
- kdelibs3: * Applied an official patch that fixes an issue in …
- 14:10 Ticket #16619 (certain characters in long description cause corrupt receipt to be ...) created by
- I'm testing a new port for libpqxx in a local user port repository. I'll …
- 14:02 Ticket #16618 (Building gcc43 on Leopard Intel locks computer) created by
- I have a new Mac Pro with Intel Xeon processors running Leopard 10.5.5 and …
- 13:54 Ticket #16067 (sane-backends update to 1.0.19) closed by
- fixed: I've re-added the patch in r40152. Thanks for reporting that!
- 13:52 Changeset [40152] by
- Re-added patch-configure patch. Closes ticket #16067.
- 13:41 Ticket #16617 (py25-clientform dependencies) created by
- py25-clientform failed to build because of missing dependancies. it …
- 13:28 Changeset [40151] by
- www/elinks: Updated to 0.11.5.
- 13:27 Changeset [40150] by
- www/elinks: Moved all variants to the bottom.
- 13:10 Ticket #16067 (sane-backends update to 1.0.19) reopened by
- macsforever2000, you should not remove the patch I've committed. …
- 13:03 Changeset [40149] by
- Version bump to 0.147.
- 12:51 Changeset [40148] by
- Total number of ports parsed: 5039 Ports successfully parsed: 5039 …
- 12:42 Ticket #16616 (Update wxWidgets to 2.8.9) created by
- Please update wxWidgets to 2.8.9.
- 12:36 Ticket #16611 (Installing php5 no pear.conf.sample) closed by
- fixed: I fixed the wiki page to show …
- 12:32 howto/MAMP edited by
- The pear.conf only needs to be set up if you're using the +pear variant; … (diff)
- 12:18 Changeset [40147] by
- snoopy: actually this patch is Mac-specific; #16609
- 12:01 howto/MAMP edited by
- explain initial empty root password (diff)
- 10:23 Ticket #16597 (subversion 1.5.2 and bzr-svn 0.4.12 Keychain authentication support ...) closed by
- wontfix
- 09:40 Ticket #16615 (Port mysql5: Missing log folder) created by
- Ryan wrote me: > /opt/local/var/log/mysql5 is the correct directory for …
- 08:42 Ticket #16614 (Update Doxygen 1.5.5 to 1.5.7) created by
- Please update doxygen 1.5.5 to 1.5.6.
- 08:15 Ticket #16613 (vtk5 5.2.0) created by
- vtk5 current version in ports is 5.0.3. The attached diff updates the vtk5 …
- 07:58 Ticket #11420 (hping3 doesn't work on Intel) closed by
- worksforme: Closing due to lack of response.
- 07:55 Changeset [40146] by
- Version bump to 1.10.
- 07:34 Changeset [40145] by
- version 3.6.3
- 07:30 Changeset [40144] by
- deluge: update to version 1.0.0
- 06:05 Ticket #16612 (git-svn broken after upgrading to git 1.6.0.2 ... Errno architecture ...) created by
- […]
- 05:26 Changeset [40143] by
- Version bump to 0.146.
- 03:43 Changeset [40142] by
- Run a script in 'make install' and .dmg postflight which removes any …
- 03:36 Ticket #16611 (Installing php5 no pear.conf.sample) created by
- I found the same problem installing just now the newest port php5 …
- 01:51 Changeset [40141] by
- install.php: clarify that the given Xcode versions are minimum …
- 01:40 howto/MAMP edited by
- revert incorrect change to root password setting instructions (diff)
- 01:29 howto/MAMP edited by
- fix directory name (mysqld5 => mysql5) (diff)
- 00:51 Changeset [40140] by
- Total number of ports parsed: 5039 Ports successfully parsed: 5039 …
- 00:44 Ticket #16582 (Updated swi-prolog portfile for version 5.6.60) closed by
- fixed: Thanks for the update! I took the liberty of applying your livecheck fix …
- 00:44 Changeset [40139] by
- swi-prolog: mainatiner update to 5.6.60; closes #16582
- 00:32 Changeset [40138] by
- swi-prolog-lite: merge r40137 from swi-prolog: fix livecheck; see #16582
- 00:30 Changeset [40137] by
- swi-prolog: fix livecheck; see #16582
- 00:15 Ticket #16609 (snoopy-2.9.95 Warcraft III Hosting Utility) closed by
- fixed: Thanks for the new port! I committed it in r40136, however I did have to …
- 00:04 Changeset [40136] by
- snoopy: new port, version 2.9.95; closes #16609
Note: See TracTimeline
for information about the timeline view.