Timeline
01/09/09:
- 23:59 Ticket #17530 (glib2 should depend on perl and python) closed by
- fixed: Fixes in r45190 (maintainer timeout).
- 23:57 Changeset [45190] by
- glib2 and glib2-devel: glib-mkenums and gtester-report are perl and python …
- 23:52 Changeset [45189] by
- Total number of ports parsed: 5426 Ports successfully parsed: 5426 …
- 23:34 Ticket #17945 (RFE: teg does not need to depend on perl5.8) created by
- Since teg depends on p5-xml-parser, it does not need to depend on …
- 23:25 Changeset [45188] by
- openmortal: Change default perl port to perl5 (see #16830).
- 23:23 Ticket #17944 (RFE: Change perl dependency of frozenbubble2) created by
- Attached is a proposed change to the perl dependency of …
- 23:17 Ticket #17943 (RFE: nip2 does not need to depend on perl5.8) created by
- Since nip2 depends on p5-xml-parser, it does not need to depend on …
- 23:12 Changeset [45187] by
- xchat2: Change perl dependency from port:perl5.8 to path:bin/perl (see …
- 23:10 Changeset [45186] by
- weechat: Change perl dependency from port:perl5.8 to path:bin/perl (see …
- 23:08 Changeset [45185] by
- silc-client: Merge perl dependency from depends_build and depends_run into …
- 23:05 Changeset [45184] by
- irctree: Change default perl port to perl5 (see #16830).
- 23:04 Changeset [45183] by
- kdelibs3: Change perl dependency from port:perl5.8 to path:bin/perl (see …
- 22:53 Ticket #17516 (netpbm: parallel build fails) closed by
- fixed
- 15:51 Changeset [45182] by
- Total number of ports parsed: 5426 Ports successfully parsed: 5426 …
- 14:53 Changeset [45181] by
- devel/libksba - version update to 1.0.5
- 14:52 Changeset [45180] by
- Total number of ports parsed: 5426 Ports successfully parsed: 5426 …
- 14:18 blb edited by
- Add openpgpsdk (diff)
- 14:16 Changeset [45179] by
- New port - security/openpgpsdk, OpenPGP library SDK
- 14:15 Ticket #17942 (a2ps configure broken) created by
- I just tried "port install a2ps", and am seeing: checking host system …
- 13:52 Changeset [45178] by
- Total number of ports parsed: 5425 Ports successfully parsed: 5425 …
- 13:20 Changeset [45177] by
- ispell: Increase revision after r45176.
- 13:19 Ticket #17941 (ispell LIBDIR path is incorrect?) closed by
- fixed: Fixed in r45176. Thanks for pointing this out.
- 13:18 Changeset [45176] by
- ispell: Prevent destroot from being listed as installation directory. …
- 12:52 Changeset [45175] by
- Total number of ports parsed: 5425 Ports successfully parsed: 5425 …
- 12:51 Ticket #17941 (ispell LIBDIR path is incorrect?) created by
- After installing ispell using the "sudo port install ispell" command, …
- 12:11 Ticket #17940 (RFE: Change perl dependency of sleuthkit) created by
- Attaches is a proposed change to the perl dependency of sleuthkit. …
- 12:08 Changeset [45174] by
- stow: Change default perl port to perl5 (see #16830).
- 12:07 Ticket #17939 (RFE: xserve-raid-tools does not need to depend on perl5.8) created by
- Since xserve-raid-tools depends on p5-xml-parser, it does not need …
- 12:03 Changeset [45173] by
- num-utils: Change default perl port to perl5 (see #16830).
- 12:02 Changeset [45172] by
- keep: Change default perl port to perl5 (see #16830).
- 12:01 Changeset [45171] by
- fs-check: Change default perl port to perl5 (see #16830).
- 11:59 Ticket #17938 (RFE: change default perl used in dpkg) created by
- Attaches is a proposed change of dpkg. See #16830 for the reasons.
- 11:56 Changeset [45170] by
- convmv: Change default perl port to perl5 (see #16830).
- 11:54 Ticket #17937 (RFE: change default perl used in chsuf) created by
- Attaches is a proposed change of chsuf. See #16830 for the reasons.
- 11:52 Changeset [45169] by
- Total number of ports parsed: 5425 Ports successfully parsed: 5425 …
- 11:49 Changeset [45168] by
- gwget: Change default perl port to perl5 (see #16830).
- 11:49 Changeset [45167] by
- eog: Change default perl port to perl5 (see #16830).
- 11:45 Ticket #17936 (unittest-cpp: update to 1.4) created by
- I updated the UnitTest++ portfile to version 1.4. Also fixed the test …
- 11:41 Changeset [45166] by
- gstreamer: configure script is confused by bison version of x.y.z (instead …
- 11:07 Ticket #17935 (py25-pymvpa - current - A machine learning library for python) created by
- from the site: PyMVPA is a Python module intended to ease pattern …
- 11:00 Ticket #17767 (liboil update to 0.3.15) closed by
- fixed: Fixed in r45165 (maintainer timeout).
- 10:58 Changeset [45165] by
- liboil: Update version 0.3.14 -> 0.3.15. Add missing dependencies on …
- 10:43 Ticket #17934 (py25-hcluster - 0.2.0 - portfile for hcluster module) created by
- from the site: This library provides Python functions for agglomerative …
- 09:30 Ticket #17933 (py25-pynifti - Python interface for the nifti medical image format) created by
- from the site: NIfTI is a new Analyze-style data format, proposed by the …
- 09:28 Ticket #17932 (nifticlib - Portfile for the nifticlib package) created by
- This portfile installs the development libraries for the Nifti image …
- 08:46 Ticket #17931 (inkscape broken by perl5.8 upgrade then fails to build) created by
- On an Intel Mac running Leopard 10.5.6 and XCode 3.1.2 after upgrading the …
- 06:52 Changeset [45164] by
- Total number of ports parsed: 5425 Ports successfully parsed: 5425 …
- 06:41 Ticket #17927 (python23 cannot import asyncore again) closed by
- fixed: Fixed in r45163.
- 06:39 Changeset [45163] by
- python23: fix error importing asyncore on Leopard (#17927)
- 06:14 Changeset [45162] by
- Merge r45161 from trunk: ChangeLog: uninstall's --recursive option ended …
- 06:06 Changeset [45161] by
- ChangeLog: uninstall's --recursive option ended up being renamed to …
- 05:45 Ticket #17930 (py30-bz2 depends on python25) created by
- py30-bz2 depends on python25
- 04:42 Changeset [45160] by
- Removed the build.cmd and set the build.dir instead, per suggestion from …
- 02:52 Changeset [45159] by
- Total number of ports parsed: 5425 Ports successfully parsed: 5425 …
- 02:38 Changeset [45158] by
- tuntaposx: * use configure.cc and configure.cxx rather than hardcoding a …
- 01:52 Changeset [45157] by
- Total number of ports parsed: 5425 Ports successfully parsed: 5425 …
- 01:44 Ticket #17892 (tuntaposx updates) closed by
- fixed: r45156. Thanks mlk!
- 01:43 Changeset [45156] by
- net/tuntaposx: ensure apple gcc is used; closes #17892.
- 00:54 Changeset [45155] by
- graphviz-devel: merge r45084 and r45153 from graphviz; see #17392
- 00:52 Changeset [45154] by
- Total number of ports parsed: 5425 Ports successfully parsed: 5425 …
- 00:51 Changeset [45153] by
- graphviz: fix whitespace issue from r45084
- 00:49 Ticket #17913 (bash 3.2.48 - Remove slow download site) closed by
- fixed: Thanks, applied in r45152.
- 00:49 Changeset [45152] by
- shells/bash: Remove slow mirror, closes #17913.
- 00:36 Changeset [45151] by
- rdesktop: also needs automake at build time (see #17923)
- 00:33 Ticket #17929 (gimp-app fails to build) created by
- […] There's a …
- 00:32 Ticket #17923 (rdesktop missing depency and ACLOCAL) closed by
- fixed: I don't know where the environment variable comes into things, but this is …
- 00:31 Changeset [45150] by
- rdesktop: add build dep on pkgconfig (#17923). Also switch to the new …
- 00:28 Ticket #17928 (libmikmod: unused patchfile patch-configure) created by
- libmikmod has a patchfile patch-configure which can be deleted; it was …
- 00:27 Ticket #17927 (python23 cannot import asyncore again) created by
- Could not reopen #4182 so obviously need to file a new ticket... #4182 …
- 00:17 Ticket #17926 (libmikmod: underquoted definition of AM_PATH_LIBMIKMOD) created by
- Anytime I use autoreconf I get this: […] jmr has been fixing errors …
- 00:13 Changeset [45149] by
- gd2: simplify autoreconfing to just "use_autoreconf yes"
- 00:02 Changeset [45148] by
- gd2: fix copy/paste error from r45147
- 00:02 Ticket #15031 (xpdf port should document its variants) closed by
- fixed: This was fixed in r41832.
01/08/09:
- 23:58 Changeset [45147] by
- gd2: work with either libtool 1.x or 2.x This wasn't quite what I wanted; …
- 23:57 Changeset [45146] by
- gd2: use "use_autoconf" to autoreconf
- 23:49 Ticket #17922 (db47 fails to configure if ${prefix}/lib/tclConfig.sh does not exist) closed by
- fixed: Fixed in r45145. Thank you for pointing this out.
- 23:48 Changeset [45145] by
- db47: Instead of relying on Tcl without having it as a dependency (an …
- 23:36 Changeset [45144] by
- smpeg: don't use "system" just to create a symlink
- 22:52 Changeset [45143] by
- Total number of ports parsed: 5425 Ports successfully parsed: 5425 …
- 22:41 Changeset [45142] by
- dcraw: update to 8.89-20090108144600 (small change in dcraw.c)
- 19:29 Ticket #16833 (dbus autolaunch fails because of '/' characters in $DISPLAY) reopened by
- 19:19 Ticket #17925 (recode +universal: Undefined symbols _libintl_bindtextdomain ...) created by
- Trying to install recode @3.6_3+universal fails with messages that …
- 18:52 Changeset [45141] by
- Total number of ports parsed: 5425 Ports successfully parsed: 5425 …
- 18:45 Ticket #17909 (smpeg doesn't build universal) closed by
- fixed: r45140
- 18:44 Changeset [45140] by
- smpeg: Build universal. Ticket #17909
- 18:18 Ticket #17906 (texlive-2007_6 not sufficient dependiencies to libpng) closed by
- invalid
- 17:53 Ticket #17924 (hs-parsec 3.0.0 - New port) created by
- The version of Parsec that comes with ghc is outdated. This port installs …
- 17:51 Changeset [45139] by
- Total number of ports parsed: 5425 Ports successfully parsed: 5425 …
- 17:41 Changeset [45138] by
- New port - devel/cunit, Unit testing library for C
- 17:25 Changeset [45137] by
- libsdl: Fix endianness with universal builds.
- 17:07 Ticket #17923 (rdesktop missing depency and ACLOCAL) created by
- I just installed macports 1.7.0 on a fresh macbook with the sole purpose …
- 14:52 Changeset [45136] by
- Total number of ports parsed: 5424 Ports successfully parsed: 5424 …
- 14:31 Changeset [45135] by
- First cut at a tomcat6 port. This was copied from tomcat5 and hacked up …
- 14:09 Ticket #17922 (db47 fails to configure if ${prefix}/lib/tclConfig.sh does not exist) created by
- The db47 port enables tcl (in the configure phase) but does not require …
- 13:52 Changeset [45134] by
- Total number of ports parsed: 5423 Ports successfully parsed: 5423 …
- 13:45 Ticket #17921 (Name Resolution does not work properly with vpnc 0.5.3) created by
- When I did an update of ports and vpnc 0.5.3 installed I started having …
- 13:02 Changeset [45133] by
- samba3: Added smbc_urlencode and smbc_urldecode symbols to the dylib that …
- 12:52 Changeset [45132] by
- Total number of ports parsed: 5423 Ports successfully parsed: 5423 …
- 12:50 Changeset [45131] by
- darwinbuild: version bump
- 12:47 Changeset [45130] by
- pspp: whitespace changes by request of maintainer (#17605)
- 12:34 Ticket #17920 (aqbanking variant for local installation mode) created by
- To use AqBanking within a Cocoa application without having MacPorts …
- 12:33 Changeset [45129] by
- gtk2: remove description from no_x11 variant to silence lint.
- 12:19 Ticket #17918 (gtk2 2.14.7: X11 dependency issues on Tiger) closed by
- duplicate: more or less... yeah... the problem was that you likely had xorg-libX11 …
- 12:11 Changeset [45128] by
- gsl: Update version 1.11 -> 1.12.
- 12:03 Ticket #17919 (samba3: smbc_urlencode symbol not in dylib) created by
- This was happening with 3.2.6 as well before I bumped it for the CVE. …
- 11:53 Ticket #17770 (RFU: boost-jam 3.1.16 -> 3.1.17) closed by
- fixed: Fixed in r45127 (maintainer timeout).
- 11:53 Changeset [45127] by
- boost-jam: Update version 3.1.16 -> 3.1.17. Ensure that correct compiler …
- 11:52 Ticket #17918 (gtk2 2.14.7: X11 dependency issues on Tiger) created by
- I just upgraded gtk2 from gtk2 @2.14.5_0+darwin_8+x11 to gtk2 …
- 11:52 Changeset [45126] by
- Total number of ports parsed: 5423 Ports successfully parsed: 5423 …
- 11:47 Ticket #17917 (aqbanking-3.7.2 version bump) created by
- Meanwhile two new versions (3.8.0 and 3.8.1) are available. Upgrading to …
- 11:39 FAQ edited by
- add an entry for PeerGuardian blocking rsync to Apple (diff)
- 11:31 Changeset [45125] by
- samba3: 3.2.7 for CVE-2009-0022
- 11:09 Changeset [45124] by
- gtk2: update to version 2.14.7, remove unnecessary revision 0 declaration.
- 09:52 Changeset [45123] by
- Total number of ports parsed: 5423 Ports successfully parsed: 5423 …
- 09:47 Ticket #17916 (gwenhywfar variant for local installation mode) created by
- To use Gwenhywfar within a Cocoa application without having MacPorts …
- 09:33 Ticket #17915 (Updated swi-prolog-devel portfile for version 5.7.4) closed by
- fixed: Committed revision r45122. Thanks!
- 09:33 Changeset [45122] by
- Maintainer update to version 5.7.4. (#17915)
- 09:23 Ticket #17912 (ffmpeg-php Mac Port?) closed by
- invalid: Looks like there currently are no ports available in MacPorts for …
- 09:13 Ticket #17915 (Updated swi-prolog-devel portfile for version 5.7.4) created by
- Updated swi-prolog-devel portfile for version 5.7.4.
- 09:13 Ticket #17914 (gwenhywfar-3.5.1 version bump) created by
- Meanwhile two new versions (3.5.2 and 3.6.0) are available. Upgrading to …
- 08:56 Ticket #17913 (bash 3.2.48 - Remove slow download site) created by
- Everytime I've tried to download the bash sources, the mirror site used by …
- 08:52 Changeset [45121] by
- Total number of ports parsed: 5423 Ports successfully parsed: 5423 …
- 08:52 Changeset [45120] by
- Version bump to 1.0.
- 08:36 Ticket #17878 (tsung fails to build due to SVN checkout failure) closed by
- fixed: r45119
- 08:35 Changeset [45119] by
- erlang/tsung: use dist file that has become available in the meantime, …
- 07:57 Changeset [45118] by
- Total number of ports parsed: 5423 Ports successfully parsed: 5423 …
- 07:48 Ticket #17912 (ffmpeg-php Mac Port?) created by
- Reference Ticket #13344 ---- Replying to nox@…: > Are you …
- 07:36 Ticket #8410 (BUG: libmng-1.0.8 fails installation) closed by
- worksforme: Can't reproduce, closing.
- 07:34 Ticket #17911 (rdiff-backup version bump to 1.2.5) created by
- As per http://www.nongnu.org/rdiff-backup/index.html rdiff-backup is up to …
- 07:30 Ticket #16529 (glib.m4 has underquoted definition) closed by
- fixed: Fixed in r45117.
- 07:30 Changeset [45117] by
- glib1: fix underquoted definition in glib.m4 (#16529)
- 07:08 Changeset [45116] by
- Updated to 2.11.8.
- 07:04 Changeset [45115] by
- Updated to 0.09002.
- 07:02 Changeset [45114] by
- Updated to 0.141.
- 06:59 Changeset [45113] by
- Updated to 0.05.
- 06:59 Changeset [45112] by
- Updated to 0.22.
- 06:56 Changeset [45111] by
- Updated to 0.37.
- 06:52 Changeset [45110] by
- Total number of ports parsed: 5423 Ports successfully parsed: 5423 …
- 06:50 Changeset [45109] by
- Fixed depends.
- 06:48 Changeset [45108] by
- Updated to 2.2.1.
- 06:45 Changeset [45107] by
- Updated to 1.094001.
- 06:43 Changeset [45106] by
- Updated to 4.40.
- 06:40 Changeset [45105] by
- Updated to 5.822.
- 06:36 Changeset [45104] by
- Updated to 1.36.
- 06:34 Changeset [45103] by
- Updated to 0.68 with permission from maintainer.
- 06:29 Changeset [45102] by
- Updated to 1.9719.
- 06:26 Changeset [45101] by
- Updated to 0.42.
- 06:18 Changeset [45100] by
- Updated to 0.14.
- 06:17 Changeset [45099] by
- Updated to 0.64.
- 06:15 Changeset [45098] by
- Updated to 0.31.
- 06:13 Changeset [45097] by
- Updated to 1.149 with permission from maintainer.
- 06:10 Changeset [45096] by
- Updated to 1.13.
- 06:09 Changeset [45095] by
- Updated to 0.30 with permission from maintainer.
- 06:07 Changeset [45094] by
- Updated to 0.75.
- 06:05 Changeset [45093] by
- Updated to 1.88.
- 06:00 Ticket #17910 (xmgrace not working on OS X Leapord) created by
- Hi, I have installed grace-5.1.22 on my machine. Macports successfully …
- 05:58 Changeset [45092] by
- New port p5-variable-magic 0.26.
- 05:55 Changeset [45091] by
- Updated to 1.1902 with permission from maintainer.
- 05:54 Changeset [45090] by
- version 2.3.3
- 03:52 Changeset [45089] by
- Total number of ports parsed: 5422 Ports successfully parsed: 5422 …
- 03:15 Ticket #17846 (Update py26-twisted* to 8.2.0) closed by
- fixed: Fixed in r45088. Thanks.
- 03:15 Changeset [45088] by
- py26-twisted: Update version 8.1.0 -> 8.2.0. Fixes #17846.
- 03:03 Ticket #16726 (openssl fails to compile universal on Tiger PPC) closed by
- fixed: Fixed in r45087.
- 03:03 Changeset [45087] by
- openssl: use universal_sysroot when building universal. Fixes universal …
- 02:52 Changeset [45086] by
- pdflib: Fix python24 and pthon25 variants. Add python26 variant. Add …
- 02:52 Changeset [45085] by
- Total number of ports parsed: 5422 Ports successfully parsed: 5422 …
- 02:44 Ticket #17404 (graphviz python 2.5 bindings) closed by
- fixed: Fixed in r45084.
- 02:41 Ticket #17392 (RFE: add a few more plugin and bindings to graphviz) closed by
- fixed: Fixed in r45084 (maintainer timeout).
- 02:40 Changeset [45084] by
- graphviz: Add new bindings and plugins (quartz, python25, python26, java, …
- 02:25 Ticket #17110 (RFE: have ImageMagick use perl5 as the default perl) closed by
- fixed: Fixed in r45083 (maintainer timeout).
- 02:24 Ticket #17827 (gnokii-0.6.8 build faliure - libtool error) closed by
- fixed: Fixed in r45082 by updating to 0.6.27 (maintainer timeout).
- 02:24 Changeset [45083] by
- ImageMagick: Change default perl port to perl5 (see #16830). Fixes #17110 …
- 02:23 Changeset [45082] by
- gnokii: update to 0.6.27 (fixes #17827, maintainer timeout)
- 02:11 Changeset [45081] by
- python26: Allow a universal build on all universal_archs. Partial fix of …
- 01:05 Changeset [45080] by
- perry/port_cutleaves - Fixed a minor typo.
- 00:57 Changeset [45079] by
- perry/port_cutleaves - Added a README and made minor changes to the …
- 00:13 Ticket #17278 (Python Binary link missing in ...) closed by
- worksforme: Please use the latest python_select.
- 00:01 Changeset [45078] by
- My x11 ports - make livecheck work
01/07/09:
- 23:58 Changeset [45077] by
- x11/xorg meta ports - disable livecheck
- 23:52 Changeset [45076] by
- perry/port_cutleaves - Committed an initial version of port_cutleaves.
- 23:51 Changeset [45075] by
- Total number of ports parsed: 5422 Ports successfully parsed: 5422 …
- 23:44 Ticket #17909 (smpeg doesn't build universal) created by
- […]
- 23:09 Ticket #17833 (Update ports copying config.guess and/or config.sub to work with libtool ...) closed by
- fixed: All but racoon (which was deleted per #17880) updated in r45074 …
- 23:07 Changeset [45074] by
- Multiple ports - work with either libtool 1.x or libtool 2.x installed, …
- 23:00 Ticket #17775 (darcs-2.1.2 links against system curses instead of MacPorts ncurses) closed by
- fixed: Committed in r45073 (maintainer timeout).
- 22:59 Changeset [45073] by
- devel/darcs - make sure to use MacPorts' ncurses, ticket #17775 …
- 22:52 Changeset [45072] by
- Total number of ports parsed: 5423 Ports successfully parsed: 5423 …
- 22:45 Ticket #17880 (Remove port: racoon) closed by
- fixed: Deleted in r45071.
- 22:45 Changeset [45071] by
- racoon: delete obsolete port (#17880)
- 22:03 Changeset [45070] by
- port/port.tcl - action_variants displays variants in sorted order.
- 21:53 Changeset [45069] by
- ispell: Ensure that correct compiler is used. Use MacPorts ncurses instead …
- 20:47 Ticket #17452 (swig dependencies (was: py25-scipy upgrade goes berserk)) closed by
- wontfix: Cross-references to #126 and #2377 added. We can revisit the issue …
- 19:59 Changeset [45068] by
- exiv2: don't use "system" just to create a symlink
- 19:08 Changeset [45067] by
- Fix broken sources.conf configuration.
- 17:17 Ticket #17908 (openssl update to version 0.9.8j) created by
- Simple patch attached to update devel/openssl to version 0.9.8j.
- 17:12 Ticket #14131 (openssl +universal variant does not build on ppc) closed by
- duplicate: Dup of #16726 (since that ticket has a patch).
- 16:52 Changeset [45066] by
- Total number of ports parsed: 5423 Ports successfully parsed: 5423 …
- 16:01 Ticket #17807 (QMK-Groundstation-0.6.3) closed by
- fixed: Added in r45065.
- 16:00 Changeset [45065] by
- Added new port QMK-Groundstation (#17807)
- 15:52 Changeset [45064] by
- Total number of ports parsed: 5422 Ports successfully parsed: 5422 …
- 15:04 Changeset [45063] by
- update google-perftools to 1.0
- 13:52 Changeset [45062] by
- Total number of ports parsed: 5422 Ports successfully parsed: 5422 …
- 13:13 Changeset [45061] by
- darwinbuild version bump
- 13:07 Changeset [45060] by
- version bump, bind9 to 9.6.0-P1 (security fix release) - bind9.6 does not …
- 12:53 Ticket #17907 (xsane fails to build unviersal) closed by
- worksforme: It turns out I had a /usr/local/include/sane/sane.h which was …
- 12:52 Changeset [45059] by
- Total number of ports parsed: 5422 Ports successfully parsed: 5422 …
- 12:43 Ticket #17907 (xsane fails to build unviersal) created by
- […]
- 12:35 Changeset [45058] by
- exiv2: Build universal
- 12:33 Changeset [45057] by
- pango: Build better with system_x11 variant and nonstandard x11prefix with …
- 12:32 Changeset [45056] by
- gtk2: Build better with system_x11 variant and nonstandard x11prefix with …
- 12:25 Changeset [45055] by
- mutt-devel: specify ${prefix} on configure args that accept it, just in …
- 12:16 Changeset [45054] by
- Remove setting of applications_dir because it is automatically set in …
- 11:55 Ticket #17884 (gimp2 2.6.4 configure can't find XML::Parser) closed by
- fixed: According to #17803, this was fixed in r45042.
- 11:55 Changeset [45053] by
- cairo: Fix universal build and work around AC_X_PATH suckage. See #17558
- 11:53 Ticket #17803 (RFE: upgrade perl5.8 5.8.8 -> 5.8.9) closed by
- fixed
- 11:50 Changeset [45052] by
- zsh: rename dp_completion variant to mp_completion
- 10:52 Changeset [45051] by
- Total number of ports parsed: 5422 Ports successfully parsed: 5422 …
- 10:27 Ticket #17868 (Update Mercurial 1.1.1 to 1.1.2) closed by
- fixed
- 10:26 Changeset [45050] by
- Update to 1.1.2, closes #17868.
- 10:21 Changeset [45049] by
- jasper: Allow X11 glut to satisfy dependency. Removed Xcode 3.0.0 libGL …
- 10:09 Ticket #16997 (Ticket #16857) closed by
- invalid
- 09:47 Ticket #17904 (openjpeg doesn't build universal) closed by
- fixed: Fixed in r45048. Thanks for pointing this out.
- 09:46 Changeset [45048] by
- openjpeg: Modify Makefile to actually build universal library in the …
- 07:07 Ticket #17906 (texlive-2007_6 not sufficient dependiencies to libpng) created by
- Installing texlive works. However, running pdflatex with including png …
- 06:52 Changeset [45047] by
- Total number of ports parsed: 5422 Ports successfully parsed: 5422 …
- 06:48 Ticket #17905 (Problems installing dvdrtools) created by
- Installing dvdrtools in the momento of the building I received this error …
- 06:25 Changeset [45046] by
- gnustep-make: don't use flat namespace (no rev bump, in before the index)
- 06:07 Changeset [45045] by
- gnustep-base: update to 1.18.0
- 05:57 Changeset [45044] by
- gnustep-make: update to 2.0.8
- 04:52 Changeset [45043] by
- Total number of ports parsed: 5422 Ports successfully parsed: 5422 …
- 03:48 Changeset [45042] by
- perl5.8: Allow perl to find p5-* ports installed by version 5.8.8. Attempt …
- 00:51 Changeset [45041] by
- Total number of ports parsed: 5422 Ports successfully parsed: 5422 …
- 00:41 Changeset [45040] by
- version 1.1.2
- 00:35 Changeset [45039] by
- version 5.9.3
- 00:07 Changeset [45038] by
- xorg-libice: Version bump to 1.0.5
01/06/09:
- 19:41 Changeset [45037] by
- base/ChangeLog - Enhanced the variants action (#14178, #15628).
- 18:00 Changeset [45036] by
- port/port.tcl - Removed a needlessly nested if statement.
- 17:52 Ticket #15628 (RFE: Enhance port variants) closed by
- fixed: Cleaned up the code in r45034.
- 17:52 Changeset [45035] by
- Total number of ports parsed: 5422 Ports successfully parsed: 5422 …
- 17:50 Ticket #14178 (show default_variants in "port variants foobar") closed by
- fixed: Cleaned up the code in r45034.
- 17:47 Changeset [45034] by
- src/port, src/port1.0 - Cleaned up the variants code related to Ticket …
- 17:16 Changeset [45033] by
- pure: upstream patch to fix build problem with bison 2.4
- 17:07 Changeset [45032] by
- pure-devel: update to 0.16 587 and finally fix build issue with bison 2.4
- 16:10 Ticket #17889 (Can't compile kde4libs - configure error) closed by
- worksforme: Can't help you, works for me. Looks like there's some thing wrong with …
- 15:34 Ticket #17890 (disabling ccache for perl5.8 (5.8.9)) closed by
- fixed: Added configure.ccache no in r45031
- 15:33 Changeset [45031] by
- disable ccache due to reported problems - resolves #17890
- 14:52 Changeset [45030] by
- Total number of ports parsed: 5422 Ports successfully parsed: 5422 …
- 14:39 Changeset [45029] by
- exiv2: Not universal
- 13:52 Changeset [45028] by
- Total number of ports parsed: 5422 Ports successfully parsed: 5422 …
- 13:43 Ticket #17904 (openjpeg doesn't build universal) created by
- openjpeg builds only for the native arch even when +universal
- 13:36 Changeset [45027] by
- libwmf: Only do mkfontdir for the x11 variant
- 13:04 Changeset [45026] by
- gwyddion: Update to 2.12
- 12:23 Ticket #17903 (exo: universal compilation failure... missing mmintrin.h) created by
- builds fine -universal […] The problem is that mmintrin.h is …
- 11:52 Changeset [45025] by
- Total number of ports parsed: 5422 Ports successfully parsed: 5422 …
- 11:41 Ticket #17902 (libwmf: doesn't compile with universal variant) created by
- the build stops with an error about […] a few lines earlier it seems …
- 11:40 Changeset [45024] by
- libwmf: Build universal, cache fonts, updated X11 dependencies
- 11:35 Ticket #17901 (p5-finance-quote 1.13 -> 1.15) created by
- Update required to 1.15 version that is now available
- 11:21 Ticket #17900 (New Portfile for the physics library Chipmunk-4.1.0) created by
- Hi, I created a Portfile for the …
- 08:53 Changeset [45023] by
- Total number of ports parsed: 5422 Ports successfully parsed: 5422 …
- 08:42 Ticket #17899 (Goocanvas 0.9 fails to build (incompatible with GTK 2.14)) closed by
- fixed: Fixed in r45022, by updating to 0.13.
- 08:42 Changeset [45022] by
- goocanvas: update to 0.13, fixes #17899
- 08:24 Ticket #17898 (readline installation failing) closed by
- fixed: That mirror is no longer used as of r44977. Sync or selfupdate and try …
- 08:17 Changeset [45021] by
- delete non-working mirror from perl_cpan group
- 08:05 Ticket #17899 (Goocanvas 0.9 fails to build (incompatible with GTK 2.14)) created by
- The goocanvas script needs updating to use a more recent upstream version …
- 08:01 Ticket #17898 (readline installation failing) created by
- I am trying to install couchdb using macports (haven't used macports …
- 07:52 Changeset [45020] by
- Total number of ports parsed: 5422 Ports successfully parsed: 5422 …
- 07:14 Changeset [45019] by
- dnsupdate, dnsupdate27: remove applications_dir definition for 1.6
- 07:07 Ticket #17897 (apache2 path env) closed by
- invalid: This isn't a bug, it's a tech support question. Ask on the macports-users …
- 07:03 Changeset [45018] by
- smpeg: fix underquoted definition in smpeg.m4; fixes #17780 (maintainer …
- 06:54 Changeset [45017] by
- remove 1.6 workaround, detab, add sha1/rmd160 checksums
- 06:52 Changeset [45016] by
- Total number of ports parsed: 5422 Ports successfully parsed: 5422 …
- 06:45 Changeset [45015] by
- speex: fix underquoted definition in speex.m4
- 06:39 Ticket #17897 (apache2 path env) created by
- I'm using apache2 installed and running via macports in /opt/local. I'm …
- 06:08 Ticket #17896 (xcodebuild: unknown option: -sdk) created by
- I'm running Leopard 10.5.6 and XCode 3.0. When using the universal variant …
- 05:52 Changeset [45014] by
- Total number of ports parsed: 5422 Ports successfully parsed: 5422 …
- 05:42 Ticket #17895 (Perl 5.8.9 cannot find XML::Parser) closed by
- duplicate: No point having multiple tickets about the same thing…
- 05:41 Ticket #17891 (gnucash-docs @2.2.0 installation, yelp @2.22.0 failed to build) closed by
- duplicate: Duplicate of #17884.
- 05:28 Changeset [45013] by
- ruby/rb-rspec-rails: update to 1.1.11
- 05:27 Changeset [45012] by
- ruby/rb-rspec: update to 1.1.11
- 04:03 Changeset [45011] by
- whois: enable universal build
- 03:52 Changeset [45010] by
- Total number of ports parsed: 5422 Ports successfully parsed: 5422 …
- 03:43 Changeset [45009] by
- whois: * update to 4.7.30 * locales now actually work * install a …
- 03:30 Ticket #17895 (Perl 5.8.9 cannot find XML::Parser) created by
- Yesterday I did an update, and perl5.8 got updated to perl 5.8.9. Today, …
- 00:52 Changeset [45008] by
- Total number of ports parsed: 5422 Ports successfully parsed: 5422 …
- 00:09 Ticket #17894 (R port bump to R 2.8.1) closed by
- fixed: Committed in r45007.
- 00:09 Changeset [45007] by
- math/R: Maintainer update to version 2.8.1, closes #17894
01/05/09:
- 23:51 Changeset [45006] by
- Total number of ports parsed: 5422 Ports successfully parsed: 5422 …
- 23:40 Changeset [45005] by
- graphviz-devel: update to 2.21.20090106.0545
- 23:26 Changeset [45004] by
- xine-lib: update to 1.1.15
- 23:22 Ticket #17894 (R port bump to R 2.8.1) created by
- R was recently upgraded to 2.8.1.
- 22:58 Changeset [45003] by
- gnome/gnome-build - version update to 2.24.1; vastly simplify …
- 22:52 Changeset [45002] by
- Total number of ports parsed: 5422 Ports successfully parsed: 5422 …
- 22:47 Changeset [45001] by
- ruby/rb-{activerecord, activeresource, rails, actionpack, activesupport, …
- 22:46 Changeset [45000] by
- ruby/rb-rake: update to 0.8.3
- 22:45 Changeset [44999] by
- ruby/rb-sqlite3: update to 1.2.4
- 22:31 Changeset [44998] by
- gnome/gnome-build - whitespace changes
- 22:23 Changeset [44997] by
- net/avahi - version update to 0.6.24
- 22:16 Changeset [44996] by
- samba3: Not universal
- 22:15 Changeset [44995] by
- inventor: Removed redundant dep on openmotif. glw brings it in
- 22:14 Ticket #17543 (gconf doesn't build universal) closed by
- fixed: r44991
- 22:13 Changeset [44994] by
- libffi: update to 3.0.7 and disable universal variant; see #17679
- 22:11 Changeset [44993] by
- libgdiplus: Updated X11 dependencies
- 22:01 Changeset [44992] by
- gnome-vfs: universal
- 22:00 Changeset [44991] by
- gconf: Missed some binaries in the universal fix. This should get them …
- 21:52 Changeset [44990] by
- Total number of ports parsed: 5422 Ports successfully parsed: 5422 …
- 21:22 Changeset [44989] by
- gconf: universal variant-fu
- 21:16 Changeset [44988] by
- devel/libdaemon - version update to 0.13
- 21:01 Ticket #17893 (autogen update to version 5.9.7) created by
- Attached patch updates devel/autogen to 5.9.7; afterwards files/ can be …
- 20:52 Changeset [44987] by
- Total number of ports parsed: 5422 Ports successfully parsed: 5422 …
- 20:31 Changeset [44986] by
- gnome/gdl - version update to 2.24.0
- 20:27 Changeset [44985] by
- gnome/gdl - whitespace changes
- 20:03 Changeset [44984] by
- faad2: patch for buffer overflow in front end
- 19:58 Changeset [44983] by
- gnome/vte - version update to 0.19.4; remove files/ as the patch file …
- 19:52 Changeset [44982] by
- Total number of ports parsed: 5422 Ports successfully parsed: 5422 …
- 19:43 Changeset [44981] by
- gnome/anjuta - whitespace changes
- 18:56 Ticket #17879 (portfile update: texinfo 4.13a) closed by
- invalid: I've updated the Portfile to use use_lzma. Concerning 4.13a, this is the …
- 18:52 Changeset [44980] by
- Total number of ports parsed: 5422 Ports successfully parsed: 5422 …
- 18:46 Changeset [44979] by
- texinfo: use use_lzma.
- 18:38 Ticket #17892 (tuntaposx updates) created by
- tuntaposx does not compile if 'gcc' or 'g++' in the user's PATH are not …
- 18:32 Changeset [44978] by
- dcraw: update to 8.89-20090104154500 (small change in dcraw.c)
- 17:42 Changeset [44977] by
- ftp.cwru.edu is awful
- 15:52 Changeset [44976] by
- Total number of ports parsed: 5422 Ports successfully parsed: 5422 …
- 15:27 Changeset [44975] by
- Remove the livecheck since Spring no longer hosts the files at …
- 15:26 Changeset [44974] by
- New upstream 1.0.0.M4 release of Spring JavaConfig.
- 15:09 Ticket #17891 (gnucash-docs @2.2.0 installation, yelp @2.22.0 failed to build) created by
- Could not install gnucash-docs due to a 'fail to build yelp' checking for …
- 14:52 Changeset [44973] by
- Total number of ports parsed: 5422 Ports successfully parsed: 5422 …
- 14:29 Ticket #17848 (xsane: update to 0.996) closed by
- fixed: Committed in r44972 (maintainer timeout).
- 14:28 Changeset [44972] by
- xsane: update to version 0.996. Closes #17848 (maintainer timeout).
- 14:10 Changeset [44971] by
- inkscape-devel: update to svn r20461, update port description, display …
- 13:49 Ticket #17890 (disabling ccache for perl5.8 (5.8.9)) created by
- The nightly upgrade cycle of my Mac showed following issue with perl5.8 …
- 11:09 Ticket #17889 (Can't compile kde4libs - configure error) created by
- Hi, I have the following error at configure time with kdelibs4. It's a …
- 10:32 Ticket #17803 (RFE: upgrade perl5.8 5.8.8 -> 5.8.9) reopened by
- Replying to mcalhoun@…: > Attached is a proposed update to …
- 10:30 Changeset [44970] by
- port/port.tcl: port dependents: Read the dep_map only once
- 09:44 Ticket #17888 (sbcl 1.0.24 fails to build on Tiger) created by
- sbcl 1.0.22 doesn't run properly on Tiger, it simply says "Bus Error" and …
- 09:23 Ticket #17887 (dvdrip installation problem) closed by
- duplicate: #17886
- 08:06 Ticket #17885 (dvdrip installation problem) closed by
- duplicate: #17886
- 03:01 Ticket #17887 (dvdrip installation problem) created by
- Dear Sirs, when I tried to install dvdrip, sudo port install dvdrip, the …
- 02:59 Ticket #17886 (Error building gtk2 during dvdrip installation) created by
- Dear Sirs, when I tried to install dvdrip, sudo port install dvdrip, the …
- 02:58 Ticket #17885 (dvdrip installation problem) created by
- Dear Sirs, when I tried to install dvdrip, sudo port install dvdrip, the …
- 01:24 Changeset [44969] by
- port-help.tcl - add help text for select command (added in r44693)
- 01:03 Ticket #17883 (port dependents doesn't give useful output when passed a list of ports) closed by
- fixed: Committed in r44967, merged back to release_1_7 in r44968.
- 01:00 Changeset [44968] by
- Merging r44967 into release_1_7. See #17883.
- 00:53 Changeset [44967] by
- port/port.tcl: Fix port dependents when passing multiple ports, fixes …
- 00:52 Changeset [44966] by
- Total number of ports parsed: 5422 Ports successfully parsed: 5422 …
- 00:34 Ticket #17884 (gimp2 2.6.4 configure can't find XML::Parser) created by
- I got an error when upgrading to gimp2 2.6.4. […] So I did: […] …
- 00:27 Changeset [44965] by
- python30: after r44165, this version is not a beta release.
- 00:23 Ticket #17777 (python30-doc 3.0a3 Compilation failure) closed by
- duplicate: Duplicate of #17478.
- 00:22 Changeset [44964] by
- xorg-libs: Actually, leave mesa as a lib: dependency since the mesa port …
- 00:19 Changeset [44963] by
- xorg-libs: Added missing Xft2, mesa, xpm, and xrender
- 00:08 Changeset [44962] by
- xorg-libXTrap: Needed to revbump for the dependencies update
- 00:08 Changeset [44961] by
- xorg-libXTrap: Fixed dependencies, added livecheck
Note: See TracTimeline
for information about the timeline view.