Timeline
03/05/10:
- 21:09 Ticket #19583 (py26-wxpython wrongfully decides to build himself universal) reopened by
- 19:49 Ticket #23943 (nco +netcdf4 extract failure when netcdf not installed) closed by
- fixed: Run nc-config in the pre-configure rather than the pre-extract phase. …
- 19:48 Changeset [64440] by
- nco: run nc-config at the pre-configure phase
- 16:54 Changeset [64439] by
- Total number of ports parsed: 6653 Ports successfully parsed: 6653 …
- 16:52 Ticket #23951 (aqbanking: update to latest stable version) created by
- Here is an update for this port to the latest stable version 4.2.4. Works …
- 16:27 Ticket #23939 (zoo 2.10pl1 post-destroot error) closed by
- fixed: r64438
- 16:27 Changeset [64438] by
- zoo: change homepage to something that makes sense, use extract.mkdir, fix …
- 15:54 Changeset [64437] by
- Total number of ports parsed: 6653 Ports successfully parsed: 6653 …
- 15:23 Ticket #23950 (gwenhywfar: Update to latest stable version) created by
- I just updated the Portfile to the latest stable version of this port.
- 15:07 Changeset [64436] by
- wine-devel: update to 1.1.40
- 13:52 Changeset [64435] by
- osxvnc: error in pre-configure instead of pre-fetch, so "sudo port fetch …
- 13:13 Ticket #23949 (py-pcapy: please create py26-pcapy (and update to the latest upstream ...) created by
- The only pcapy port in existence is py-pcapy based on pcapy 0.10.4 and …
- 12:54 Changeset [64434] by
- Total number of ports parsed: 6653 Ports successfully parsed: 6653 …
- 12:09 Ticket #23598 (Python error activatin duplicity) closed by
- fixed: committed in r64433
- 12:08 Changeset [64433] by
- fixed problematic duplicity port, at the expense of python25 support
- 11:54 Changeset [64432] by
- Total number of ports parsed: 6653 Ports successfully parsed: 6653 …
- 11:07 Changeset [64431] by
- updated version
- 10:54 Changeset [64430] by
- Total number of ports parsed: 6653 Ports successfully parsed: 6653 …
- 10:47 Changeset [64429] by
- darwinbuild-15
- 10:46 Changeset [64428] by
- updated version
- 10:43 Changeset [64427] by
- update version
- 10:43 Changeset [64426] by
- add replaced_by for KDE 4.4.X
- 10:36 Changeset [64425] by
- updated version
- 10:25 Migration edited by
- Help with a possible error (diff)
- 10:20 Changeset [64424] by
- Add patch to fix major regression with importNode
- 10:12 Ticket #23948 (abcde: disktool is deprecated; should use diskutil instead) created by
- 10:02 Ticket #23947 (xsane +universal fails to build on 10.6.2) created by
- sudo port clean xsane ; sudo port -d install xsane output attached.
- 09:57 Ticket #23946 (advi +universal fails to build on 10.6.2) created by
- Debug output attached. This apparently differs from #23673 and #7759 as …
- 08:40 Ticket #23945 (epiphany build failure due to xml2po) created by
- I tried to install gnome on my macbook. It failed, and now it is …
- 08:35 Ticket #23944 (tbb fails to build on PowerPC) created by
- Using MacOS 10.4.11 on ppc, with Apple gcc 4.0 […] Output included in a …
- 08:17 Changeset [64423] by
- missing escape for bracket in regex
- 06:39 Changeset [64422] by
- steupenv.bash: Do not set MANPATH if it is empty as man will automatically …
- 03:51 Ticket #22339 (Installing swi-prolog-devel does not work) closed by
- worksforme: Closing due to lack of response.
- 03:28 Ticket #23441 (Incompatible library version: rsync requires version 8.0.0 or later, but ...) closed by
- invalid
- 03:22 Ticket #23943 (nco +netcdf4 extract failure when netcdf not installed) created by
- If I try to extract nco with the netcdf4 variant but netcdf has not yet …
- 01:44 Ticket #23942 (dialog @1.1-20100119 (devel) has wrong checksum) created by
- […]
- 00:59 Changeset [64421] by
- nco: fixed check for netcdf-4 availability
03/04/10:
- 23:14 Ticket #23941 (tsocks segmentation fault) created by
- tsocks segmentation faults when I don't specify a default server in …
- 22:32 Ticket #23940 (lzop fails to build universal) created by
- […]
- 22:18 Ticket #23939 (zoo 2.10pl1 post-destroot error) created by
- Error log […]
- 20:59 Changeset [64420] by
- store os.platform and os.major in registry
- 20:48 Changeset [64419] by
- with reg2, fix activate's deactivation of any active version of the same …
- 20:19 Ticket #23938 (bochs: error: 'kAudioUnitComponentType' was not declared in this scope) created by
- Trying to build on Snow Leopard fails with the following output: […]
- 18:58 Ticket #23937 (p5-time-format 1.11 - new portfile submission) created by
- New Portfile for the Time::Format perl module. …
- 18:54 Changeset [64418] by
- Total number of ports parsed: 6653 Ports successfully parsed: 6653 …
- 18:19 Changeset [64417] by
- updated version
- 17:54 Changeset [64416] by
- Total number of ports parsed: 6653 Ports successfully parsed: 6653 …
- 17:34 Changeset [64415] by
- devel/pamtester: New port, version 0.1.2. pamtester is a utility for …
- 16:54 Changeset [64414] by
- Total number of ports parsed: 6652 Ports successfully parsed: 6652 …
- 16:33 Ticket #22753 ([derby] DERBY_HOME can not be properly set) closed by
- fixed: Please reopen or open a new ticket for additional modifications.
- 16:29 Ticket #23936 (py-pcapy fails to build on Snow Leopard) created by
- […]
- 16:22 Changeset [64413] by
- Fix #22753 by installing the entire Derby install into …
- 14:55 Ticket #23935 (Ruby installation error on macbookpro) closed by
- invalid: Please read the installation instructions. You …
- 14:54 Changeset [64412] by
- Total number of ports parsed: 6652 Ports successfully parsed: 6652 …
- 14:43 Ticket #23935 (Ruby installation error on macbookpro) created by
- I just install port on my macbookpro and I tried to use port to install …
- 14:38 Ticket #23934 (centerim-4.22.9 portfile patch for new version) created by
- This patch updates the centerim port to support/build version 4.22.9, …
- 14:33 Changeset [64411] by
- Added missing checksums.
- 14:32 Changeset [64410] by
- Fixed dependencies.
- 14:29 Changeset [64409] by
- Updated to 1.11 and took over port.
- 14:27 Changeset [64408] by
- Added use_module_build.
- 14:26 Changeset [64407] by
- Added missing dependency.
- 14:25 Changeset [64406] by
- Added missing dependency.
- 14:23 Changeset [64405] by
- Added missing dependency.
- 14:20 Changeset [64404] by
- Updated to 0.11.
- 14:12 Changeset [64403] by
- Updated to 0.34.
- 14:11 Changeset [64402] by
- Updated to 0.11005.
- 14:07 Changeset [64401] by
- Updated to 2.3.1.
- 14:04 Changeset [64400] by
- Updated to 0.001002.
- 14:02 Changeset [64399] by
- Updated to 0.27.
- 14:01 Changeset [64398] by
- Updated to 0.94.
- 14:00 Changeset [64397] by
- Updated to 0.10.
- 13:59 Changeset [64396] by
- Updated to 2.26.
- 13:58 Changeset [64395] by
- Updated to 1.28.
- 13:57 Changeset [64394] by
- Updated to 0.42.
- 13:56 Ticket #23933 (Portfile patch to update mercurial from 1.4.2 to 1.4.3) created by
- I'm attaching a Portfile patch to update the mercurial from 1.4.2 to 1.4.3
- 13:55 Changeset [64393] by
- Updated to 0.2702.
- 13:54 Changeset [64392] by
- Total number of ports parsed: 6651 Ports successfully parsed: 6651 …
- 13:53 Changeset [64391] by
- Updated to 0.05003.
- 13:51 Changeset [64390] by
- Updated to 0.08120.
- 13:49 Changeset [64389] by
- New port p5-context-preserve 0.01.
- 13:42 Changeset [64388] by
- Updated to 1.11.
- 13:39 Changeset [64387] by
- Updated to 0.27.
- 13:36 Changeset [64386] by
- Updated to 5.80021.
- 13:35 Changeset [64385] by
- Updated to 1.27.
- 13:34 Changeset [64384] by
- Updated to 0.1083.
- 13:32 Changeset [64383] by
- Updated to 1.58.
- 12:49 Ticket #22325 (new port: sshguard-ipfw) closed by
- fixed: port added in r64382 I changed startupitem.stop a bit so that it only …
- 12:48 Changeset [64382] by
- New port, sshguard-ipfw. Fixes #22325
- 12:06 Ticket #23932 (dsniff not installing on Snow Leopard 10.6.2) created by
- Trying to install dsniff. Got an error to do with libnet so i uninstalled …
- 11:49 Ticket #23931 (icu 4.3.4 + ccache) created by
- […]
- 11:43 Ticket #23930 (spatialite build fails) created by
- Here's the debug output: […]
- 11:41 Ticket #23929 (Qtiplot-0.9.7.9-upgrade to 0.9.7.12) created by
- Proposing the upgrade of Qtiplot to version 0.9.7.12, which contains quite …
- 11:37 Ticket #23928 (opendx autoreconf failure: error: m4_require: circular dependency of ...) created by
- I've tried installing OpenDX on MacPorts 1.8.2 using the following …
- 11:01 Ticket #23927 (libxls-new port submission) created by
- Proposing a new port as libxls, a library in C which can read Excel files. …
- 10:45 Ticket #23926 (Muparser-1.30-upgrade to 1.32) created by
- Proposing the upgrade of muparser to new version. Please see attached …
- 09:55 Changeset [64381] by
- Convert from tab to space indentation.
- 09:54 Changeset [64380] by
- Total number of ports parsed: 6650 Ports successfully parsed: 6650 …
- 09:35 Ticket #23921 (upgrade tries to install new version of inactive port mentioned in depspec ...) closed by
- fixed: The log shows that py26-modulegraph is already installed (though …
- 09:26 Changeset [64379] by
- New port p5-amazon-s3 0.45.
- 09:22 Changeset [64378] by
- New port p5-lwp-useragent-determined 1.04.
- 09:15 Changeset [64377] by
- New port p5-digest-md5-file 0.07.
- 09:11 Changeset [64376] by
- Updated to 1.02 and took over port.
- 09:02 Changeset [64375] by
- Updated to 1.05 and took over port.
- 07:01 Ticket #23925 (Rquest for a Smarty and Smarty Beta port) created by
- I'd like to request two new ports based on the Smarty Template engine for …
- 03:46 Changeset [64374] by
- do not use parallel build for caml-pcre
- 02:00 Ticket #23924 (py26-tables update to 2.2b2 and lzo2) created by
- 2.1.x is not compatible with numpy 1.4 and the current portfile variant …
03/03/10:
- 23:22 Ticket #23893 (Amarok fails to configure: qtscriptgenerator not found) closed by
- duplicate: #23716
- 20:56 Changeset [64373] by
- store archs in flat registry too
- 20:53 Changeset [64372] by
- add supported_archs option, record archs in registry, simplify …
- 19:54 Changeset [64371] by
- Total number of ports parsed: 6647 Ports successfully parsed: 6647 …
- 19:43 Ticket #12206 (RFE: noarch metadata) closed by
- duplicate: This can be handled as part of #20739.
- 19:03 Changeset [64370] by
- sql syntax error
- 18:54 Changeset [64369] by
- fix category, go openmaintainer
- 18:53 Changeset [64368] by
- create beginnings of nepomuk
- 18:26 Changeset [64367] by
- db column metadata, new columns for planned features
- 17:54 Changeset [64366] by
- Total number of ports parsed: 6646 Ports successfully parsed: 6646 …
- 17:39 Changeset [64365] by
- updated to KDE 4.4.1
- 16:54 Changeset [64364] by
- Total number of ports parsed: 6646 Ports successfully parsed: 6646 …
- 16:48 Ticket #12231 (BUG: tcl sqlite3 default directory) closed by
- fixed: r64363
- 16:47 Changeset [64363] by
- non-darwin default locations for tcl-sqlite3 (#12231)
- 16:38 Changeset [64362] by
- update to KDE 4.4.1
- 16:14 Ticket #23923 (xulrunner build failure) created by
- […]
- 15:34 Ticket #23922 (archcheck portgroup explodes if "port" prints a generic error) closed by
- fixed: Yes indeed, just throwing away the stderr fixes it. r64361.
- 15:33 Changeset [64361] by
- archcheck-1.0.tcl: fix error message when architectures don't match AND …
- 14:54 Changeset [64360] by
- Total number of ports parsed: 6646 Ports successfully parsed: 6646 …
- 14:40 Ticket #23922 (archcheck portgroup explodes if "port" prints a generic error) created by
- If the "port" command would print an error regardless what command you use …
- 14:26 Changeset [64359] by
- p5-module-depends: update to 0.15
- 14:10 Changeset [64358] by
- remove bundled copy of sqlite3, make sqlite3 location configurable
- 12:57 Ticket #23921 (upgrade tries to install new version of inactive port mentioned in depspec ...) created by
- I can not install py26-py2app-devel due to a dependency problem: # …
- 12:56 Ticket #23918 (Could you upgrade to version 0.4) closed by
- fixed: You can manually edit the port file for py25-suds. Change the version …
- 12:54 Changeset [64357] by
- Total number of ports parsed: 6646 Ports successfully parsed: 6646 …
- 12:52 Ticket #23920 (gzip build failure) created by
- After some 28 hours this is how the build ended: […]
- 12:16 FAQ edited by
- add question about recursive dependency list (diff)
- 12:00 Ticket #23919 (steghide build fails with "glibtool: link: unable to infer tagged ...) created by
- Could not install steghide on macports. Just installed macports on Snow …
- 11:50 Changeset [64356] by
- update to KDE 4.4.1
- 11:21 Changeset [64355] by
- remove cregistry.a from LIBS since it's in OBJS now
- 09:54 Changeset [64354] by
- Total number of ports parsed: 6646 Ports successfully parsed: 6646 …
- 09:44 Ticket #23917 (error when installing pwlib) closed by
- duplicate: Duplicate of #23915.
- 09:28 Ticket #23918 (Could you upgrade to version 0.4) created by
- I made some test with suds and a Web service provider and the 0.3.9 …
- 09:15 Changeset [64353] by
- www/privoxy: update to 3.0.16
- 08:54 Ticket #23915 (checksum error when installing pwlib) closed by
- fixed: Disabled the mirror in question in r64351 and added another one.
- 08:54 Changeset [64352] by
- Total number of ports parsed: 6646 Ports successfully parsed: 6646 …
- 08:48 Ticket #23917 (error when installing pwlib) created by
- […]
- 08:40 Changeset [64351] by
- net/pwlib: Disable mirror, see #23915
- 08:21 Changeset [64350] by
- updated version
- 08:17 Ticket #23916 (gimp-app build fails on snow leapard) closed by
- duplicate: Duplicate of #21718
- 08:09 Ticket #23916 (gimp-app build fails on snow leapard) created by
- […]
- 08:09 Ticket #23915 (checksum error when installing pwlib) created by
- […]
- 07:54 Changeset [64349] by
- Total number of ports parsed: 6646 Ports successfully parsed: 6646 …
- 07:28 Changeset [64348] by
- updated version
- 06:54 Changeset [64347] by
- Total number of ports parsed: 6646 Ports successfully parsed: 6646 …
- 05:54 Changeset [64346] by
- sysutils/sudo: Security fix for CVE-2010-0427: Update to version 1.6.9p21
- 05:54 Changeset [64345] by
- Total number of ports parsed: 6646 Ports successfully parsed: 6646 …
- 05:15 Changeset [64344] by
- py26-beaker: update to 1.5.3
- 04:57 Ticket #23854 (rb-gettext 2.1.0 add dependency to rb-locale) closed by
- fixed: I've merged your patch as r6422. thanks!
- 01:54 Changeset [64343] by
- Total number of ports parsed: 6646 Ports successfully parsed: 6646 …
- 01:14 Changeset [64342] by
- gnudatalanguage: added CMSVLIB
03/02/10:
- 20:40 Ticket #23914 (git-core - Update to 1.7.0.1) created by
- Attached is a patch for the git-core Portfile that updates its version …
- 18:54 Changeset [64341] by
- Total number of ports parsed: 6646 Ports successfully parsed: 6646 …
- 18:39 Changeset [64340] by
- changed braces to quotes in notes
- 18:26 Changeset [64339] by
- Bumped version to wview-5.14.3; updated checksums
- 18:07 Ticket #23897 (gettext won't activate) closed by
- invalid: Ok, from your attachment we see the reason why gettext cannot activate: A …
- 16:55 Ticket #23912 (patch.cmd missing) closed by
- invalid: You are missing patch(1), which should be present if you have the …
- 15:54 Changeset [64338] by
- Total number of ports parsed: 6646 Ports successfully parsed: 6646 …
- 15:34 Ticket #23479 (firefox-x11-devel +internal_dependencies is missing GUI icons) closed by
- fixed: r64337
- 15:34 Changeset [64337] by
- firefox-x11-devel: Fix mising buttons. Bug #23479.
- 15:28 Changeset [64336] by
- gnome-doc-utils: Bump to 0.18.1
- 14:49 Ticket #23913 (allow selective enabling of bash-completion modules) created by
- Currently there is no way to selectively enable bash-completion modules; …
- 13:43 Changeset [64335] by
- define name column in registry2 db as case insensitive
- 13:28 Ticket #23912 (patch.cmd missing) created by
- I was attempting to install the xulrunner package with no success. I am …
- 12:54 Changeset [64334] by
- Total number of ports parsed: 6646 Ports successfully parsed: 6646 …
- 12:51 Changeset [64333] by
- fix action_location when using reg2
- 12:26 Changeset [64332] by
- py26-sphinx: update to 0.6.5
- 12:10 Ticket #22821 (perl5.8 build failure on Snow Leopard: Makefile not found) closed by
- invalid
- 11:23 Ticket #23911 (miriad 4.1.1.20091018 - update to version 20100302) created by
- Attached is a patch that updates the Portfile for miriad to point to the …
- 11:19 Ticket #23910 (siag-3.6.0 fails to build) created by
- siag-3.6.0 failed to build on PPC Mac. Debug output is attached.
- 11:13 Ticket #23909 (mowitz violates layout of ports-filesystems) created by
- It seemed to install and activate, but the following was returned. …
- 10:56 Ticket #23908 (Update weka to 3.6.2) created by
- Weka is now version 3.6.2. I've created a diff that the maintainer can use …
- 10:54 Changeset [64331] by
- Total number of ports parsed: 6646 Ports successfully parsed: 6646 …
- 09:51 Changeset [64330] by
- version bump to 0.3
- 08:54 Changeset [64329] by
- Total number of ports parsed: 6646 Ports successfully parsed: 6646 …
- 08:25 Ticket #23907 (sshfs 2.2[2.4] No fstab support) created by
- I thought it should be noted that the current sshfs version, 2.2, does not …
- 08:17 Ticket #23896 (Mowitz-0.3.0 Fetch Failure) closed by
- fixed: r64328
- 08:17 Changeset [64328] by
- mowitz: fix master_sites (#23896), remove unnecessary flags
- 08:06 Changeset [64327] by
- mowitz: whitespace, modeline
- 07:52 Ticket #22883 (New version of rlwrap 0.33) closed by
- duplicate: Superseded by #23900.
- 07:49 Changeset [64326] by
- Updated jython to 2.5.1
- 07:48 Ticket #23902 (libquicktime – build failure) closed by
- invalid: You can't build with +universal because not all of the dependencies are …
- 06:06 Ticket #19255 (coq-8.2 new variant for coqide) closed by
- fixed: Looks like r58228.
- 05:17 Ticket #23898 (Incorrect md5 checksum with TexShop: Fails to fetch) closed by
- worksforme: I've redownloaded and the checksum continues to work correctly. Please …
- 04:54 Changeset [64325] by
- Total number of ports parsed: 6646 Ports successfully parsed: 6646 …
- 04:23 Changeset [64324] by
- py26-gevent: update to 0.12.2
- 03:07 Ticket #23906 (NLTK Ports upgrade to 2.0b8) created by
- Updated port for NLTK (http://www.nltk.org/) (resolves problem with …
- 01:51 Ticket #23905 (caml-gsl needs ${distname} set) created by
- caml-gsl is new package that is just a rename of ocamlgsl to fit with the …
03/01/10:
- 22:30 Ticket #23904 (dspam 3.8.0 version update?) created by
- upstream dspam stable release is 3.9.0
- 22:27 Ticket #23903 (postfix 2.6.2 version update?) created by
- upstream postfix stable release is at version 2.7.0
- 21:54 Changeset [64323] by
- Total number of ports parsed: 6646 Ports successfully parsed: 6646 …
- 21:26 Changeset [64322] by
- audio/ncmpcpp upgraded version from 0.5.1 to 0.5.2
- 21:24 Changeset [64321] by
- archivers/unrar upgraded version from 3.9.8 to 3.9.9
- 21:23 Changeset [64320] by
- devel/iso-codes upgraded version from 3.13 to 3.14
- 21:14 Ticket #23902 (libquicktime – build failure) created by
- […]
- 20:54 Changeset [64319] by
- Total number of ports parsed: 6646 Ports successfully parsed: 6646 …
- 20:21 Changeset [64318] by
- dropping maintainership
- 19:09 Changeset [64317] by
- add flat->sqlite receipt conversion, fix …
- 17:27 Changeset [64316] by
- nco: returns error when netcdf +netcdf4 is not installed
- 15:54 Changeset [64315] by
- Total number of ports parsed: 6646 Ports successfully parsed: 6646 …
- 15:23 Ticket #23901 (ZSI-2.0 is broken) created by
- Hi! Port py2x-zsi doesn't work because of ZSI-2.0 is broken. I've …
- 15:09 Changeset [64314] by
- xulrunner-devel: bump to 1.9.2
- 14:21 Ticket #23900 (Update rlwrap to 0.36) created by
- rlwrap is at version 0.36. I've attached a Portfile diff -- all the …
- 13:54 Changeset [64313] by
- Total number of ports parsed: 6646 Ports successfully parsed: 6646 …
- 13:53 Ticket #23899 (libsdl_mixer static lib linked with dynamic dependencies) created by
- The static lib of libsdl_mixer (libSDL_mixer.a) is linked against/with the …
- 13:35 Changeset [64312] by
- * new upstream version (0.07)
- 13:06 Ticket #19237 (libtool uses gsed but does not declare dependency) closed by
- fixed: * r64311: Adding dependency on gsed and grep (which is in the same …
- 13:06 Changeset [64311] by
- libtool: add dependencies on grep and gsed, paths to which glibtoolize …
- 11:54 Changeset [64310] by
- Total number of ports parsed: 6646 Ports successfully parsed: 6646 …
- 11:36 Changeset [64309] by
- bump gpodder version 2.3
- 11:25 Changeset [64308] by
- xmlsec: avoid doubled slash in download URL
- 11:04 Changeset [64307] by
- fix registry::check_dependents
- 10:51 Changeset [64306] by
- re-fix receipt_sqlite::installed
- 10:09 Changeset [64305] by
- fix problem with eval and empty registry search strings
- 09:35 Changeset [64304] by
- error checking, use realloc
- 08:31 Ticket #21476 (jbigkit 2.0 Doesn't build universal) closed by
- fixed
- 08:15 Ticket #23898 (Incorrect md5 checksum with TexShop: Fails to fetch) created by
- TexShop fails to fetch due to the incorrect md5 checksum. See attached …
- 07:40 Ticket #23897 (gettext won't activate) created by
- I tried to install latex2rtf and got stuck on a dependency... gettext I …
- 07:31 Ticket #23896 (Mowitz-0.3.0 Fetch Failure) created by
- I have been trying to install mowitz 0.3.0 periodically for five days now, …
- 06:38 Ticket #23895 (p5-net-ssh2 0.28 new port) created by
- Net::SSH2 is a perl interface to the libssh2 library. It supports the …
- 06:27 Ticket #23894 (sudo port install zlib fails on Snow Leopard) created by
- Running "sudo port install zlib" on mac os 10.6.2 fails with the following …
- 05:54 Changeset [64303] by
- Total number of ports parsed: 6646 Ports successfully parsed: 6646 …
- 05:30 Changeset [64302] by
- ImageMagick: update to 6.6.0-0; all tests passed on Snow Leopard
- 05:23 Ticket #23893 (Amarok fails to configure: qtscriptgenerator not found) created by
- When trying to sudo port install amarok I get this message: […] …
- 05:18 Changeset [64301] by
- py26-routes: update to 1.12
- 05:16 Changeset [64300] by
- py26-gevent: update to 0.12.1
Note: See TracTimeline
for information about the timeline view.