Timeline
06/03/10:
- 23:05 Ticket #25127 (Brings Pidgin to 2.7.1) created by
- The attached patch brings Pidgin to version 2.7.1. I'm not sure if the …
- 22:22 Ticket #25126 (mercurial: patch for version 1.5.4) created by
- Attached is the Portfile patch for the current mercurial version 1.5.4
- 21:47 Changeset [68468] by
- Total number of ports parsed: 1 Ports successfully parsed: 1 Ports …
- 21:08 Changeset [68467] by
- archivers/unshield - update to 0.6
- 20:48 Changeset [68466] by
- Total number of ports parsed: 1 Ports successfully parsed: 1 Ports …
- 20:27 Ticket #24798 (gst-plugins-good fails to build) closed by
- fixed: This issue seems to be resolved by building current gst-plugins against …
- 20:24 Ticket #25125 (zlib destroot failure when Xcode is too old) created by
- I am new to macports, so forgive me if this question is simplistic. I am …
- 20:19 Ticket #25109 (mail/libidn upgrade version from 1.18 to 1.19) closed by
- fixed: Upgrade and open maintainership committed in r68465. Thanks Olaf.
- 20:18 Changeset [68465] by
- mail/libidn upgraded version from 1.18 to 1.19, added open maintainership …
- 19:32 Ticket #25117 (git-core: Error: Dependency 'libiconv' not found) closed by
- invalid
- 19:23 CommittersTipsAndTricks edited by
- simplify explorative programming instructions (diff)
- 19:02 Changeset [68464] by
- merge r68463 from trunk: fix error reporting when the given port is not …
- 18:59 Ticket #25122 (confusing error message when setrequested used on non-installed port) closed by
- fixed: Thanks for the report, fixed in r68463.
- 18:59 Changeset [68463] by
- fix error reporting when the given port is not installed in …
- 18:42 Ticket #25124 (arpack: unknown flag: -current_version) created by
- On my MacBook Pro running Tiger, I have arpack 1_3 installed. I can't …
- 17:47 Changeset [68462] by
- Total number of ports parsed: 1 Ports successfully parsed: 1 Ports …
- 17:23 Ticket #25119 (Putty install fails on gtk1) closed by
- duplicate: Duplicate of #24915 where you can read about the workaround (downgrade to …
- 17:11 Changeset [68461] by
- devel/bzr-explorer: Update to version 1.0.2
- 16:47 Changeset [68460] by
- Total number of ports parsed: 1 Ports successfully parsed: 1 Ports …
- 16:43 Changeset [68459] by
- qt4-mac: Undo r37370. See …
- 16:36 Ticket #25123 (p5-svn-notify: update to 2.80) created by
- p5-svn-notify should probably be updated to 2.80.
- 16:05 Ticket #25122 (confusing error message when setrequested used on non-installed port) created by
- This is for 1.9.0-rc2 sorry if I set the version wrong... If I do: sudo …
- 15:53 Ticket #25121 (Cannot launch kmymoney2 - dyld: Library not loaded: ...) created by
- When I try to launch my compiled port for kmymoney2, it fails with the …
- 15:21 Changeset [68458] by
- - be more precise concerning icons
- 15:01 Ticket #25120 (dos2unix doesn't ensure it's UsingTheRightCompiler) created by
- I think the change in #19347 is biting me. I am trying to rebuild all …
- 15:00 Ticket #25119 (Putty install fails on gtk1) created by
- Hello, My appologies if this is a duplicated ticket, but i am new to mac …
- 14:58 Ticket #25034 (mit-scheme: reinplace didn't change anything in several files) closed by
- fixed: Indeed they do, thanks. Fixed in r68457.
- 14:58 Changeset [68457] by
- mit-scheme: remove unnecessary reinplaces (#25034).
- 14:47 Changeset [68456] by
- Total number of ports parsed: 3 Ports successfully parsed: 3 Ports …
- 14:20 CommittersTipsAndTricks edited by
- (diff)
- 14:16 Changeset [68455] by
- py26-pylibmc: update to version 1.1
- 14:03 CommittersTipsAndTricks edited by
- added a note for trunk user and explorative tcl shell (diff)
- 13:48 Changeset [68454] by
- Total number of ports parsed: 8 Ports successfully parsed: 8 Ports …
- 13:48 Ticket #24913 (emacs22 +universal: unexec: input file not in Mach-O format) closed by
- fixed: Fixed in r68453
- 13:47 Changeset [68453] by
- emacs22: fix universal build by using muniversal portgroup (#24913)
- 13:46 Ticket #24236 (erc depends on emacs but conflicts with it) closed by
- fixed: Patches applied in r68451 and r68452.
- 13:45 Changeset [68452] by
- org-mode: don't rename info file; no longer necessary after r68451. See …
- 13:45 Ticket #25118 (qimageblitz 0.0.5 svn: invalid option: --trust-server-cert) created by
- trying to install amarok on mac os x 10.6 got the error: svn: invalid …
- 13:43 Changeset [68451] by
- Store emacs info files in $prefix/share/info/emacs instead of …
- 13:11 Changeset [68450] by
- Update maintainer email address on my ports to use macports.org handle.
- 13:05 Changeset [68449] by
- Update to version 4.7.3. Removed -g from configure arguments to prevent …
- 13:04 Changeset [68448] by
- Update to version 4.10.2.
- 12:25 dports created by
- Create a rudimentary page for myself
- 12:18 MacPortsDevelopers edited by
- Add self to developers list (diff)
- 11:47 Changeset [68447] by
- Total number of ports parsed: 1 Ports successfully parsed: 1 Ports …
- 11:20 Changeset [68446] by
- FDclone: Version bump to 3.00g.
- 10:57 Ticket #25117 (git-core: Error: Dependency 'libiconv' not found) created by
- […]
- 09:52 Ticket #25116 (x264 fetching) created by
- tried many many times, always getting the same error at x264 […]
- 09:47 Changeset [68445] by
- Total number of ports parsed: 2 Ports successfully parsed: 2 Ports …
- 09:41 Changeset [68444] by
- fix #25113 - update the dependency from py26-ige-mac-integration to …
- 09:21 Changeset [68443] by
- Added a Start button on the drawer that calls the startQueue: method when …
- 09:12 Changeset [68442] by
- Replaced the Drawer with one from Interface Builder, added a ScrollView on …
- 08:53 Changeset [68441] by
- version upgrade to 0.9-preview-3
- 08:47 Changeset [68440] by
- Total number of ports parsed: 6 Ports successfully parsed: 6 Ports …
- 08:43 Changeset [68439] by
- New port: rb19-mechanize
- 08:34 Ticket #25084 (webkit-gtk 1.1.15.4 build failed) closed by
- worksforme: Glad you got it working.
- 08:31 Changeset [68438] by
- New port: rb19-redcloth
- 08:24 Changeset [68437] by
- New port: rb19-unicorn
- 08:11 Ticket #25115 (Upgrade drush package to latest version (3.0)) created by
- Drush version 3.0 has been out for a while. Here's an updated Portfile: …
- 08:08 Changeset [68436] by
- New port: rb19-thin
- 07:49 Changeset [68435] by
- New port: rb19-eventmachine
- 07:47 Changeset [68434] by
- Copied rb-daemons port to rb19-daemons port (changing relevant lines)
- 06:47 Changeset [68433] by
- Total number of ports parsed: 1 Ports successfully parsed: 1 Ports …
- 06:17 Changeset [68432] by
- MacPorts port: update to 1.9.0-rc2
- 06:12 Changeset [68431] by
- Create tag for 1.9.0 release candidate 2
- 05:51 Ticket #25114 (openssl: update to 1.0.0a) created by
- As this changes the library version, all dependents will need a rev bump. …
- 04:48 Changeset [68430] by
- Total number of ports parsed: 2 Ports successfully parsed: 2 Ports …
- 04:24 Changeset [68429] by
- version 0.9.8o
- 03:59 Changeset [68428] by
- py26-lepl: update to version 4.2.3
- 03:48 Changeset [68427] by
- Total number of ports parsed: 4 Ports successfully parsed: 4 Ports …
- 03:31 Changeset [68426] by
- fix livecheck
- 03:30 Changeset [68425] by
- version bump
- 03:29 Changeset [68424] by
- use the tango icons, instead of gnome icons
- 03:26 Ticket #25113 (gpodder 2.6 depends on py26-ige-mac-integration) created by
- As I understand py26-ige-mac-integration has been replaced by …
- 03:22 Changeset [68423] by
- py26-msgpack: new port
- 01:14 Ticket #25112 (py26-webkitgtk: could not find pygobject-codegen-2.0 script) created by
- I have installed MacPorts and all required dependencies tonight. I can't …
06/02/10:
- 22:57 Ticket #25110 (Unable to execute port: can't read "build.cmd":) closed by
- invalid: Please read the page on [http://www.macports.org/install.php installing …
- 22:47 Changeset [68422] by
- Total number of ports parsed: 2 Ports successfully parsed: 2 Ports …
- 22:38 Changeset [68421] by
- keep GtkLauncher (standalone browser) to ease investigating issues
- 22:37 Changeset [68420] by
- xdotool: update to 2.20100602.2915
- 22:12 Ticket #25111 (gdbm doesn't fully support build_arch) created by
- On Snow Leopard, I've set build_arch to i386 in macports.conf but not all …
- 22:07 Ticket #22063 (gcc44 and gcc45 conflict on ${prefix}/share/python/aotcompile.py) closed by
- fixed: Markus fixed this for gcc44 in r67117 and for gcc45 in r67118.
- 21:47 Changeset [68419] by
- Total number of ports parsed: 2 Ports successfully parsed: 2 Ports …
- 21:38 Ticket #25110 (Unable to execute port: can't read "build.cmd":) created by
- Hello, I am new with max and I am trying to use macports to install …
- 20:53 Ticket #24179 (gst-plugins-good 0.10.21 build error) closed by
- worksforme
- 20:52 Changeset [68418] by
- merge r68416 from trunk: generate a quick index for newly rsynced …
- 20:50 Changeset [68417] by
- x11/xorg-xproto upgraded version from 7.0.16 to 7.0.17
- 20:48 Changeset [68416] by
- generate a quick index for newly rsynced platform-specific PortIndex files
- 20:47 Changeset [68415] by
- x11/xorg-util-macros upgraded version from 1.7.0 to 1.8.0
- 20:43 Ticket #25109 (mail/libidn upgrade version from 1.18 to 1.19) created by
- Attached please find a diff of the libidn Portfile. If you can find it in …
- 20:32 Changeset [68414] by
- merge r68413 from trunk: set mtime of PortIndex to that of the newest …
- 20:26 Changeset [68413] by
- set mtime of PortIndex to that of the newest Portfile parsed, to avoid the …
- 20:05 Changeset [68412] by
- msieve: remove commented-out line that got left in by mistake
- 19:47 Changeset [68411] by
- Total number of ports parsed: 3 Ports successfully parsed: 3 Ports …
- 19:42 Changeset [68410] by
- msieve: add patchfile that goes with r68409
- 19:41 Ticket #25105 (msieve-1.42 build fails) closed by
- fixed: Fixed in r68409 along with an update to 1.45.
- 19:41 Changeset [68409] by
- msieve: update to 1.45; fix inability to find gmp.h (#25105); use …
- 19:30 Ticket #25106 (port clean fails at rgm3800py) closed by
- fixed: r68408
- 19:28 Changeset [68408] by
- rgm3800py: trivial change to bump file mod time (#25106)
- 19:13 Ticket #25104 (php5-xcache) closed by
- fixed: Added in r68407.
- 19:13 Changeset [68407] by
- php5-xcache: new port, version 1.3.0; see #25104
- 19:03 Changeset [68406] by
- msieve: fix livecheck
- 18:47 Changeset [68405] by
- Total number of ports parsed: 2 Ports successfully parsed: 2 Ports …
- 18:35 Ticket #25108 (can not upgrade to gnome-doc-utils 0.18.1) created by
- When I run sudo port -d upgrade outdated it gives up when reaching …
- 18:03 Changeset [68404] by
- Update python/py26-webhelpers to 1.0.
- 17:46 Ticket #24623 (getopt 1.1.4 - fails to build when arch is set to i386 on Snow Leopard) closed by
- fixed: Fixed in r68403.
- 17:46 Changeset [68403] by
- getopt: support changing build_arch; see #24623
- 15:47 Changeset [68402] by
- Total number of ports parsed: 16 Ports successfully parsed: 16 Ports …
- 15:12 Changeset [68401] by
- New port: rb19-heroku
- 15:12 Changeset [68400] by
- New port: rb19-sexp_processor
- 15:12 Changeset [68399] by
- New port: rb19-configuration
- 15:11 Changeset [68398] by
- New port: rb19-racc
- 15:11 Changeset [68397] by
- New port: rb19-rest-client
- 15:10 Changeset [68396] by
- New port: rb19-launchy
- 15:10 Changeset [68395] by
- New port: rb19-json
- 15:10 Changeset [68394] by
- New port: rb19-nanoc
- 15:10 Changeset [68393] by
- New port: rb19-nanoc3
- 15:09 Changeset [68392] by
- New port: rb19-cri
- 15:09 Changeset [68391] by
- New port: rb19-parser
- 15:08 Changeset [68390] by
- New port: rb19-parsetree
- 15:07 Changeset [68389] by
- New port: rb19-mustache
- 14:57 Changeset [68388] by
- Updated py26-yaml to 3.09
- 14:55 Changeset [68387] by
- Updated py26-webob to version 0.9.8
- 14:52 Changeset [68386] by
- Updated py26-mustache to latest version
- 14:47 Changeset [68385] by
- Total number of ports parsed: 1 Ports successfully parsed: 1 Ports …
- 14:24 Changeset [68384] by
- New port: rails.vim
- 10:47 Changeset [68383] by
- Total number of ports parsed: 3 Ports successfully parsed: 3 Ports …
- 10:24 Changeset [68382] by
- version bump to 8.3.11
- 10:03 Ticket #25107 (texlive_base doesn't fully support changing build_arch) created by
- Hi There, I needed to compile libzzip with […] and got this error: …
- 09:47 Changeset [68381] by
- Total number of ports parsed: 1 Ports successfully parsed: 1 Ports …
- 09:26 Ticket #25106 (port clean fails at rgm3800py) created by
- "sudo port clean all" fails at rgm3800py saying that it couldn't change …
- 08:57 Changeset [68380] by
- Add a new port for Google Guava, copied from the Goolge Collections port.
- 08:35 Ticket #25105 (msieve-1.42 build fails) created by
- msieve port build fails Here is the debuging output I get when installing …
- 07:47 Changeset [68379] by
- Total number of ports parsed: 2 Ports successfully parsed: 2 Ports …
- 07:15 Changeset [68378] by
- textproc/help2man upgraded version from 1.37.1 to 1.38.2
- 07:13 Changeset [68377] by
- audio/mpd upgraded version from 0.15.9 to 0.15.10
- 06:36 Ticket #25104 (php5-xcache) created by
- Hi, I have not found the php5-xcache package. Do you think to put it in a …
- 01:48 Changeset [68376] by
- Total number of ports parsed: 3 Ports successfully parsed: 3 Ports …
- 01:23 Ticket #25079 (Update kumofs to 0.4.7) closed by
- fixed: Updated in r68375.
- 01:23 Changeset [68375] by
- kumofs: maintainer update to 0.4.7; see #25079
- 01:15 Ticket #25080 (Update rb-msgpack to 0.4.1) closed by
- fixed: Updated in r68374.
- 01:15 Changeset [68374] by
- rb-msgpack: maintainer update to 0.4.1; see #25080
- 01:02 Ticket #25089 (dante @1.2.0 (net) has been upgraded to 1.2.1) closed by
- fixed: Updated in r68373.
- 01:01 Changeset [68373] by
- dante: update to 1.2.1; see #25089
- 00:48 Changeset [68372] by
- Total number of ports parsed: 3 Ports successfully parsed: 3 Ports …
- 00:42 Ticket #25082 (kitlist: update to 0.7.0) closed by
- fixed: Updated in r68371.
- 00:42 Changeset [68371] by
- kitlist: maintainer update to 0.7.0; see #25082
- 00:19 Ticket #24934 (php4, php52: build fails with gettext 0.18) closed by
- fixed: Fixed php4 in r68369 and php52 in r68370 using …
- 00:18 Changeset [68370] by
- php52: fix build failure with gettext 0.18; see #24934
06/01/10:
- 23:56 Changeset [68369] by
- php4: fix build failure with gettext 0.18; see #24934
- 22:47 Changeset [68368] by
- Total number of ports parsed: 1 Ports successfully parsed: 1 Ports …
- 22:42 Ticket #25019 (nginx: update to 0.7.65) closed by
- fixed: Maintainer timeout; updated in r68367.
- 22:41 Changeset [68367] by
- nginx: update to 0.7.65 (#25019) and disable universal variant (#23005)
- 20:41 Ticket #25103 (soprano-2.4.3 build failure) created by
- I am a newcomer to OS X as well as Macports. I have followed the …
- 19:56 Ticket #25102 (Building "afni" failed) created by
- After the previous ticket was closed, I ran a sudo port sync && sudo port …
- 19:48 Changeset [68366] by
- Total number of ports parsed: 2 Ports successfully parsed: 2 Ports …
- 19:19 Changeset [68365] by
- minivmac-devel: update to 3.3-20100601
- 18:56 Ticket #23986 (py26-pdfminer 20100213 -- New port) closed by
- fixed: This was added in r67168.
- 18:49 Ticket #23777 (new port for clamav-server) closed by
- fixed: Replaced hardcoded /opt/local with $prefix, and ui_msgs in destroot with …
- 18:48 Changeset [68364] by
- New port: clamav-server, launchdaemons for clamav (#23777)
- 18:47 Changeset [68363] by
- Total number of ports parsed: 7 Ports successfully parsed: 7 Ports …
- 18:43 Changeset [68362] by
- xdotool: update to 2.20100601.2912
- 18:41 Changeset [68361] by
- rb19-archive-tar-minitar: fix encoding of developer's last name in …
- 18:38 Changeset [68360] by
- New port: rb19-hirb
- 18:33 Changeset [68359] by
- rb19-treetop: fix typo in description
- 18:32 Changeset [68358] by
- rb19-wirble: fix typos in description
- 18:31 Changeset [68357] by
- New port: rb19-wirble
- 18:20 Changeset [68356] by
- triangle: simplify destroot
- 18:16 Changeset [68355] by
- triangle: patch in the patch phase, not in the extract and configure …
- 18:15 Changeset [68354] by
- triangle: use "extract.mkdir yes"
- 18:14 Changeset [68353] by
- triangle: remove unnecessary worksrcdir line
- 17:52 Ticket #25096 (Patch Available: Add pkg-config file to libid3tag) closed by
- fixed: Added a reinplace for the version as well. r68352
- 17:52 Changeset [68352] by
- libid3tag: add pkg-config file (#25096)
- 17:47 Changeset [68351] by
- Total number of ports parsed: 2 Ports successfully parsed: 2 Ports …
- 17:40 Ticket #25097 (gucharmap 2.26.3.1 build fail) closed by
- fixed: Fixed by updating to 2.30.1 in r68350.
- 17:38 Ticket #22515 (Update to 2.29.1 and ( quite ) some changes) closed by
- fixed: 2.29 is an unstable release series as per gnome convention. Updated to …
- 17:38 Changeset [68350] by
- gucharmap: update to 2.30.1 (#22515, #25097)
- 17:28 Ticket #25093 (can't install pango with +universal variant) closed by
- duplicate
- 17:14 Changeset [68349] by
- Fixed description on rb19-mocha
- 16:47 Changeset [68348] by
- Total number of ports parsed: 1 Ports successfully parsed: 1 Ports …
- 16:06 Ticket #25098 (Update Bacula to Version 5.0.2) closed by
- fixed: r68347. Next time, please use a unified diff. Thanks!
- 16:06 Changeset [68347] by
- Update to version 5.0.2. (#25098)
- 16:02 Ticket #25101 (nginx-devel 0.8.39 development version of nginx web server) created by
- New port for the development version of nginx. This port also contains a …
- 15:55 Ticket #25100 (vrpn submission) created by
- Submission: Virtual-Reality Peripheral Network library.
- 15:19 Ticket #25041 (rpmbuild uses /opt/local/var/tmp) reopened by
- I guess my point was more about the defaults in rpmbuild, not so much how …
- 14:59 Ticket #25099 (arpack: Makefile:78: *** missing separator. Stop.) closed by
- fixed
- 14:58 Changeset [68346] by
- math/arpack: fix non-universal build. closes #25099
- 14:47 Changeset [68345] by
- Total number of ports parsed: 17 Ports successfully parsed: 17 Ports …
- 14:32 Changeset [68344] by
- New port: rb19-treetop
- 14:32 Changeset [68343] by
- New port: rb19-sqlite3
- 14:31 Changeset [68342] by
- New port: rb19-rails
- 14:31 Changeset [68341] by
- New port: rb19-polyglot
- 14:31 Changeset [68340] by
- New port: rb19-nokogiri
- 14:30 Changeset [68339] by
- New port: rb19-mocha
- 14:30 Changeset [68338] by
- New port: rb19-mime-types
- 14:29 Changeset [68337] by
- New port: rb19-mail
- 14:29 Changeset [68336] by
- New port: rb19-hoe
- 14:28 Changeset [68335] by
- New port: rb19-haml
- 14:28 Changeset [68334] by
- New port: rb19-compass
- 14:28 Changeset [68333] by
- New port: rb19-archive-tar-minitar
- 14:27 Changeset [68332] by
- New port: rb19-activesupport
- 14:26 Changeset [68331] by
- New port: rb19-activeresource
- 14:26 Changeset [68330] by
- New port: rb19-activerecord
- 14:25 Changeset [68329] by
- New port: rb19-actionpack
- 14:24 Changeset [68328] by
- New port: rb19-actionmailer
- 14:21 Ticket #25070 (make ruby portgroup work with 1.9 program suffix) closed by
- fixed: Nobody else was taking any action on this, so I have committed it in …
- 14:20 Changeset [68327] by
- make ruby portgroup install ruby19 gems correctly, ticket 25070
- 14:20 Ticket #25099 (arpack: Makefile:78: *** missing separator. Stop.) created by
- arpack 1_4 fails to install: […] The last lines of the Makefile are: …
- 14:16 Changeset [68326] by
- Added rubygems source for ruby portgroup
- 13:47 Changeset [68325] by
- Total number of ports parsed: 1 Ports successfully parsed: 1 Ports …
- 13:15 Ticket #25098 (Update Bacula to Version 5.0.2) created by
- Bacula has been updated to version 5.0.2 (see …
- 13:08 Changeset [68324] by
- version upgrade to 0.9-preview-2
- 11:57 Ticket #25097 (gucharmap 2.26.3.1 build fail) created by
- Trying a new install of gnome "sudo port install gnome" fails at gucharmap …
- 11:47 Changeset [68323] by
- Total number of ports parsed: 1 Ports successfully parsed: 1 Ports …
- 11:33 Ticket #25066 (RFE: Allow arpack to build universal shared libraries) closed by
- fixed: Cleaned up and committed in r68322. Thanks for the patch.
- 11:32 Changeset [68322] by
- math/arpack: allow universal, shared libs. add gcc45 variant. closes …
- 11:08 Ticket #25096 (Patch Available: Add pkg-config file to libid3tag) created by
- Every distribution I've checked (Debian, Gentoo, FreeBSD, various RPM …
- 10:56 Ticket #25095 (epiphany 2.28.1 - Build fails with GTK 2.20.1) created by
- Environment: * Mac OS 10.6.3 * MacbookPro 6,2 (i7) * XCode 3.2 * …
- 09:02 Ticket #25094 (libpaper: checksum mismatch) created by
- MacPorts installed on new machine with Snow Leopard (now OS X 10.6.3) …
- 08:18 Ticket #25093 (can't install pango with +universal variant) created by
- Tried to install pango with +universal (as a part of gimp) and got a merge …
- 07:54 Ticket #25092 (pidgin: gcc finds wrong config.h) created by
- […] The build barfs with […] This is due to the build finding this …
- 05:47 Changeset [68321] by
- Total number of ports parsed: 1 Ports successfully parsed: 1 Ports …
- 05:16 Ticket #25091 (gcc46 @4.6-20100508 bootstrap comparison failure) created by
- gcc46 fails to build for me. Variants: +java. Snow Leopard 10.6.3 on …
- 05:05 Changeset [68320] by
- update version
- 05:05 Ticket #25090 (Portfile for radvd , the IPv6 Route Advertising Daemon) created by
- Here is a Portfile for radvd. It would probably be nice to have a …
- 04:39 Changeset [68319] by
- dante: fix fetch failure
- 01:29 Ticket #25089 (dante @1.2.0 (net) has been upgraded to 1.2.1) created by
- On 05/28/10, dante was upgraded to 1.2.1 so the fetching of 1.2.0 fails. …
05/31/10:
- 22:47 Changeset [68318] by
- Total number of ports parsed: 2 Ports successfully parsed: 2 Ports …
- 22:39 Ticket #23591 (MacFuse cannot activate) closed by
- worksforme: No response, closing.
- 22:33 Ticket #23730 (nightshade-10.2.1 - Submission) closed by
- fixed: r68317
- 22:33 Changeset [68317] by
- New port: nightshade, astronomy simulation and visualization software …
- 22:32 Ticket #25088 (can't build macfuse) created by
- I tried install macfuse, but can't build it. seems mismatch name of …
- 22:07 Ticket #25087 (py26-pyro 3.10 submission) created by
- Submission for py26-pyro, a lightweight package for remote objects in …
- 22:00 Ticket #23642 (pgf-devel 2010-01-17 - new portfile submission) closed by
- fixed: r68316
- 22:00 Changeset [68316] by
- New port: pgf-devel (#23642)
- 21:33 Ticket #23638 (py26-tornado) closed by
- fixed: This was added in r67416.
- 21:01 Ticket #25086 (NEW: py26-pyke 1.1.1) created by
- 20:59 Ticket #25085 (py26-twill 0.9) created by
- I have adjusted the py-twill portfile from here ( …
- 20:34 Ticket #25084 (webkit-gtk 1.1.15.4 build failed) created by
- I cannot install the port "webkit-gtk". The installation failed at the …
- 18:48 Changeset [68315] by
- Total number of ports parsed: 4 Ports successfully parsed: 4 Ports …
- 18:06 Ticket #24736 (LaTeXiT fails to install) closed by
- fixed: @michaelld: thanks! Applied and committed in r68314.
- 18:05 Changeset [68314] by
- Make LaTeXiT build on Leopard, resolving ticket #24736
- 18:05 Changeset [68313] by
- py25-distribute, py26-distribute, py31-distribute: update to 0.6.13
- 16:47 Changeset [68312] by
- Total number of ports parsed: 1 Ports successfully parsed: 1 Ports …
- 15:57 Ticket #25083 (cppunit build fails: /usr/lib/system/libmathCommon.la) created by
- Hello, I am unable to build cppunit (a dependency for ffmpeg) on my …
- 15:48 Changeset [68311] by
- glib2-devel: update to 2.25.7
- 14:52 Ticket #25078 (libQGLViewer +universal install fails) closed by
- fixed: This should be fixed in r68310.
- 14:47 Changeset [68310] by
- libQGLViewer: fix universal variant; see #25078
- 14:06 Ticket #25041 (rpmbuild uses /opt/local/var/tmp) closed by
- worksforme: You can change the default %_tmppath (in ~/.rpmmacros) if you don't want …
- 12:40 Ticket #25073 (Guide implies that bypassing destroot is possible/desirable) closed by
- fixed: While I feel this ticket belongs more in the "invalid" category, I updated …
- 12:39 Changeset [68309] by
- remark added in r68308 should be eliminated not overriden, #25073
- 12:38 Changeset [68308] by
- add remark that destroot may not be overriden, #25073
- 12:27 Changeset [68307] by
- whitespace formatting for r68306
- 12:25 Changeset [68306] by
- replace svn.tag with svn.revision
- 11:57 Ticket #25082 (kitlist: update to 0.7.0) created by
- New Portfile for version 0.7.0 of kitlist, hosted at …
- 09:47 Changeset [68305] by
- Total number of ports parsed: 1 Ports successfully parsed: 1 Ports …
- 09:26 Ticket #23576 (GRASS does not build) closed by
- worksforme
- 08:50 Changeset [68304] by
- update version
- 08:47 Changeset [68303] by
- Total number of ports parsed: 1 Ports successfully parsed: 1 Ports …
- 08:32 Changeset [68302] by
- update version
- 06:47 Changeset [68301] by
- Total number of ports parsed: 1 Ports successfully parsed: 1 Ports …
- 06:07 Changeset [68300] by
- fgsl: updated to 0.9.3
- 05:47 Changeset [68299] by
- Total number of ports parsed: 1 Ports successfully parsed: 1 Ports …
- 04:59 Ticket #23635 (NEW: dulwich) closed by
- fixed: Note that the initial revision for a port should be 0 (the default). …
- 04:59 Changeset [68298] by
- New port: py26-dulwich, a Python interface to git (#23635)
- 04:49 PortfileRecipes edited by
- reword statement about prefixes (diff)
- 04:47 Changeset [68297] by
- Total number of ports parsed: 1 Ports successfully parsed: 1 Ports …
- 04:39 Ticket #23557 (new port: pssh) closed by
- fixed: r68296
- 04:39 Changeset [68296] by
- New port: pssh, parallel versions of ssh tools (#23557)
- 03:54 Ticket #25081 (atlas uses a different default gcc than other ports) created by
- As per #20103, math and science ports should all try to use the same gcc …
- 03:36 Changeset [68295] by
- atlas: fix variant descriptions
- 01:48 Changeset [68294] by
- Total number of ports parsed: 1 Ports successfully parsed: 1 Ports …
- 01:04 Changeset [68293] by
- squid3: update to 3.1.4
- 00:48 Changeset [68292] by
- Total number of ports parsed: 3 Ports successfully parsed: 3 Ports …
- 00:40 Changeset [68291] by
- graphviz-devel, graphviz-gui-devel: update to 2.27.20100531.0445
- 00:07 Changeset [68290] by
- dcraw: update to 9.01-20100530120400
05/30/10:
- 23:11 Ticket #25080 (Update rb-msgpack to 0.4.1) created by
- rb-msgpak version 0.4.1 has been released. Portfile diff is below. […]
- 23:02 Ticket #25079 (Update kumofs to 0.4.7) created by
- kumofs version 0.4.7 has been released. Portfile diff is below. […]
- 22:13 Changeset [68289] by
- merge r68286, r68288 from trunk: fix version comparison in …
- 22:11 Changeset [68288] by
- only print reason message when epochs differ in action_outdated if the …
- 21:47 Changeset [68287] by
- Total number of ports parsed: 1 Ports successfully parsed: 1 Ports …
- 21:42 Ticket #25078 (libQGLViewer +universal install fails) created by
- […]
- 21:22 Changeset [68286] by
- fix version comparison in action_outdated when epoch has changed
- 21:11 Changeset [68285] by
- add depot_tools (for chromium)
- 18:57 Changeset [68284] by
- rearrange only: place code in order port phases
- 18:51 Changeset [68283] by
- whitespace only
- 18:38 Changeset [68282] by
- merge r68281 from trunk: log a message when copying config files in …
- 18:33 Changeset [68281] by
- log a message when copying config files in postflight
- 18:33 Changeset [68280] by
- ReleaseProcess consistency
- 15:47 Changeset [68279] by
- Total number of ports parsed: 3 Ports successfully parsed: 3 Ports …
- 15:35 Changeset [68278] by
- grails: increase revision so everyone gets the change from r68270
- 15:34 Ticket #25057 (hdf5-18 +universal: h5cc, h5c++ and libhdf5.settings contain -arch flags) closed by
- fixed: Fixed in r68277.
- 15:33 Changeset [68277] by
- hdf5-18: remove -arch flags from h5cc, h5c++ and libhdf5.settings to …
- 15:10 Ticket #14163 (Endless Avahi system.log errors) closed by
- fixed: Changed dbus to no longer require the pid file as per #15081. That …
- 15:08 Ticket #15081 (dbus failure to start after crash) closed by
- fixed: Replying to dports@…: > Attached a patchfile to …
- 15:05 Changeset [68276] by
- Stop dbus from writing an unnecesary pid file. Closes #15081 and #14163. …
- 14:25 Ticket #25077 (add gee to vala) created by
- Trying to compile the first example from here …
- 13:48 Ticket #25076 (Broken gtk1 blocks kipi-plugins (and digiKam)) created by
- When I tried to install digiKam 1.2 via a fresh MacPorts setup a few days …
- 11:12 Ticket #25074 (grails: plugins directory is not copied) closed by
- fixed
- 10:47 Changeset [68275] by
- Total number of ports parsed: 4 Ports successfully parsed: 4 Ports …
- 10:44 Changeset [68274] by
- New Install/Install with Variants button, menu items fixed, fixed the GUI …
- 10:15 Changeset [68273] by
- really replaced by gtk-osx-application
- 10:12 Changeset [68272] by
- discarding py26-ige-mac-integration in favour of gtk-osx-application
- 09:59 Changeset [68271] by
- version bump to 8.4.4
- 09:33 Ticket #25075 (postflight script sometimes overwrites conf files) created by
- Using the disk image installer to install MacPorts 1.9.0-rc1 over the top …
- 09:13 Changeset [68270] by
- #25074 copy plugins directory to installation directory
- 09:12 Ticket #25074 (grails: plugins directory is not copied) created by
- the target directory of grails does not contain the shipped plugins …
- 08:23 Changeset [68269] by
- atlas: add descriptions to variants
- 08:03 Ticket #25073 (Guide implies that bypassing destroot is possible/desirable) created by
- Section 4.3.4 of the Guide says... To eliminate a default phase .... …
- 07:47 Changeset [68268] by
- Total number of ports parsed: 2 Ports successfully parsed: 2 Ports …
- 07:31 Changeset [68267] by
- Added menu items for port operations
- 07:23 Changeset [68266] by
- fix libSUMA build, move all Makefile.INCLUDE changes to patchfile, bump …
- 07:07 Ticket #25025 (ige-mac-integration) closed by
- fixed: Committed in r68265, many thanks ! Feel free to comment or email me if …
- 07:03 Changeset [68265] by
- new port : gtk-osx-application, see #25025
- 06:48 Changeset [68264] by
- Total number of ports parsed: 3 Ports successfully parsed: 3 Ports …
- 05:54 Changeset [68263] by
- version bump to 10.05.0
- 05:54 Changeset [68262] by
- version bump to 10.05.0
- 05:54 Changeset [68261] by
- version bump to 10.05.0
- 05:30 Ticket #25004 (Webkit-gtk 1.1.15.4 fails to build on Snow Leopard) closed by
- fixed: so I'm closing the ticket. Thanks for reporting and taking the time to …
- 03:31 Ticket #25071 (can not compile Growl with GCC4.2 and Mac OS X 10.4 SDK) closed by
- duplicate: Duplicate of #20966, please search before filing new tickets.
- 03:29 Ticket #25072 (Scons 1.3.0: can't read "configure.ld_archflags") closed by
- invalid: You need to selfupdate.
- 03:26 Ticket #25069 (glom depends on nonexistent ports) closed by
- duplicate: Don't reopen this please, it is definitely a duplicate.
- 01:50 Ticket #25069 (glom depends on nonexistent ports) reopened by
- Replying to jmr@…: > #14379 Okay, what is going to happen now?
- 01:36 Ticket #25072 (Scons 1.3.0: can't read "configure.ld_archflags") created by
- Ran into this error while trying to install scons @1.3.0 (devel, python). …
- 00:48 Ticket #25071 (can not compile Growl with GCC4.2 and Mac OS X 10.4 SDK) created by
- First, I can port the growl because of missing MacOSX10.4u.sdk in my …
Note: See TracTimeline
for information about the timeline view.