| 1 | version:1 |
|---|
| 2 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 3 | :debug:main gnustep-make 2.6.1_0 exists in the ports tree |
|---|
| 4 | :debug:main gnustep-make 2.6.1_0 is the latest installed |
|---|
| 5 | :debug:main gnustep-make 2.6.1_0 is active |
|---|
| 6 | :debug:main Merging existing variants '-gnustep_layout' into variants |
|---|
| 7 | :debug:main new fully merged portvariants: gnustep_layout - |
|---|
| 8 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnustep/gnustep-make |
|---|
| 9 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 10 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 11 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 12 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 13 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 14 | :debug:main No need to upgrade! gnustep-make 2.6.1_0 >= gnustep-make 2.6.1_0 |
|---|
| 15 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 16 | :debug:main libxslt 1.1.26_0 exists in the ports tree |
|---|
| 17 | :debug:main libxslt 1.1.26_0 is the latest installed |
|---|
| 18 | :debug:main libxslt 1.1.26_0 is active |
|---|
| 19 | :debug:main Merging existing variants '' into variants |
|---|
| 20 | :debug:main new fully merged portvariants: |
|---|
| 21 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxslt |
|---|
| 22 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 23 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 24 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 25 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 26 | :debug:main adding the default universal variant |
|---|
| 27 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 28 | :debug:main No need to upgrade! libxslt 1.1.26_0 >= libxslt 1.1.26_0 |
|---|
| 29 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 30 | :debug:main libiconv 1.14_0 exists in the ports tree |
|---|
| 31 | :debug:main libiconv 1.14_0 +universal is the latest installed |
|---|
| 32 | :debug:main libiconv 1.14_0 +universal is active |
|---|
| 33 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 34 | :debug:main new fully merged portvariants: universal + |
|---|
| 35 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv |
|---|
| 36 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 37 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 38 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 39 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 40 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 41 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 42 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 43 | :debug:main Executing variant universal provides universal |
|---|
| 44 | :debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0 |
|---|
| 45 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 46 | :debug:main libxml2 2.7.8_0 exists in the ports tree |
|---|
| 47 | :debug:main libxml2 2.7.8_0 is the latest installed |
|---|
| 48 | :debug:main libxml2 2.7.8_0 is active |
|---|
| 49 | :debug:main Merging existing variants '' into variants |
|---|
| 50 | :debug:main new fully merged portvariants: |
|---|
| 51 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2 |
|---|
| 52 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 53 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 54 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 55 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 56 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 57 | :debug:main adding the default universal variant |
|---|
| 58 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 59 | :debug:main No need to upgrade! libxml2 2.7.8_0 >= libxml2 2.7.8_0 |
|---|
| 60 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 61 | :debug:main zlib 1.2.6_0 exists in the ports tree |
|---|
| 62 | :debug:main zlib 1.2.6_0 +universal is the latest installed |
|---|
| 63 | :debug:main zlib 1.2.6_0 +universal is active |
|---|
| 64 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 65 | :debug:main new fully merged portvariants: universal + |
|---|
| 66 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib |
|---|
| 67 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 68 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 69 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 70 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 71 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl |
|---|
| 72 | :debug:main adding the default universal variant |
|---|
| 73 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 74 | :debug:main Executing variant universal provides universal |
|---|
| 75 | :debug:main No need to upgrade! zlib 1.2.6_0 >= zlib 1.2.6_0 |
|---|
| 76 | :debug:main epoch: in tree: 1 installed: 1 |
|---|
| 77 | :debug:main openssl 1.0.0g_0 exists in the ports tree |
|---|
| 78 | :debug:main openssl 1.0.0g_0 +universal is the latest installed |
|---|
| 79 | :debug:main openssl 1.0.0g_0 +universal is active |
|---|
| 80 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 81 | :debug:main new fully merged portvariants: universal + |
|---|
| 82 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl |
|---|
| 83 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 84 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 85 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 86 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 87 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 88 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 89 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 90 | :debug:main Executing variant universal provides universal |
|---|
| 91 | :debug:main No need to upgrade! openssl 1.0.0g_0 >= openssl 1.0.0g_0 |
|---|
| 92 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 93 | :debug:main libffi 3.0.10_2 exists in the ports tree |
|---|
| 94 | :debug:main libffi 3.0.10_2 +universal is the latest installed |
|---|
| 95 | :debug:main libffi 3.0.10_2 +universal is active |
|---|
| 96 | :debug:main Merging existing variants '+universal' into variants |
|---|
| 97 | :debug:main new fully merged portvariants: universal + |
|---|
| 98 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libffi |
|---|
| 99 | :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 |
|---|
| 100 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 101 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 102 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 103 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 104 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 105 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 106 | :debug:main Executing variant universal provides universal |
|---|
| 107 | :debug:main No need to upgrade! libffi 3.0.10_2 >= libffi 3.0.10_2 |
|---|
| 108 | :msg:main ---> Computing dependencies for gnustep-base:info:main .:debug:main Searching for dependency: gnustep-make |
|---|
| 109 | :debug:main Found Dependency: receipt exists for gnustep-make |
|---|
| 110 | :debug:main Searching for dependency: libxslt |
|---|
| 111 | :debug:main Found Dependency: receipt exists for libxslt |
|---|
| 112 | :debug:main Searching for dependency: openssl |
|---|
| 113 | :debug:main Found Dependency: receipt exists for openssl |
|---|
| 114 | :debug:main Searching for dependency: libffi |
|---|
| 115 | :debug:main Found Dependency: receipt exists for libffi |
|---|
| 116 | :msg:main |
|---|
| 117 | :debug:main Executing org.macports.main (gnustep-base) |
|---|
| 118 | :debug:main changing euid/egid - current euid: 0 - current egid: 0 |
|---|
| 119 | :debug:main egid changed to: 502 |
|---|
| 120 | :debug:main euid changed to: 510 |
|---|
| 121 | :debug:main Skipping completed org.macports.archivefetch (gnustep-base) |
|---|
| 122 | :debug:main Privilege de-escalation not attempted as not running as root. |
|---|
| 123 | :debug:main Skipping completed org.macports.fetch (gnustep-base) |
|---|
| 124 | :debug:main Privilege de-escalation not attempted as not running as root. |
|---|
| 125 | :debug:main Skipping completed org.macports.checksum (gnustep-base) |
|---|
| 126 | :debug:main Privilege de-escalation not attempted as not running as root. |
|---|
| 127 | :debug:main Skipping completed org.macports.extract (gnustep-base) |
|---|
| 128 | :debug:main Privilege de-escalation not attempted as not running as root. |
|---|
| 129 | :debug:main Skipping completed org.macports.patch (gnustep-base) |
|---|
| 130 | :debug:main Privilege de-escalation not attempted as not running as root. |
|---|
| 131 | :debug:configure configure phase started at Mon Mar 5 10:11:34 PST 2012 |
|---|
| 132 | :notice:configure ---> Configuring gnustep-base |
|---|
| 133 | :debug:configure Using compiler 'Mac OS X gcc 4.2' |
|---|
| 134 | :debug:configure Executing org.macports.configure (gnustep-base) |
|---|
| 135 | :debug:configure Environment: CPATH='/opt/local/include' CFLAGS='-pipe -O2 -arch x86_64' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-pipe -O2 -arch x86_64' LIBRARY_PATH='/opt/local/lib' MACOSX_DEPLOYMENT_TARGET='10.6' CXX='/usr/bin/g++-4.2' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnustep_gnustep-base/gnustep-base/work/.CC_PRINT_OPTIONS' F90FLAGS='-pipe -O2 -m64' LIBOBJC='-lobjc-gnu' LDFLAGS='-L/opt/local/lib -arch x86_64' FCFLAGS='-pipe -O2 -m64' OBJC='/usr/bin/gcc-4.2' GI_SCANNER_DISABLE_CACHE='1' INSTALL='/usr/bin/install -c' OBJCFLAGS='-pipe -O2 -arch x86_64' FFLAGS='-pipe -O2 -m64' CC_PRINT_OPTIONS='YES' CC='/usr/bin/gcc-4.2' |
|---|
| 136 | :debug:configure Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnustep_gnustep-base/gnustep-base/work/gnustep-base-1.19.1" && ./configure --prefix=/opt/local CC=/usr/bin/gcc-4.2 GNUSTEP_MAKEFILES=/opt/local/share/GNUstep/Makefiles --disable-tls --enable-libffi --with-ffi-include=/opt/local/include/gcc42 --with-ffi-library=/opt/local/lib/gcc42' |
|---|
| 137 | :debug:configure Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnustep_gnustep-base/gnustep-base/work/gnustep-base-1.19.1" && ./configure --prefix=/opt/local CC=/usr/bin/gcc-4.2 GNUSTEP_MAKEFILES=/opt/local/share/GNUstep/Makefiles --disable-tls --enable-libffi --with-ffi-include=/opt/local/include/gcc42 --with-ffi-library=/opt/local/lib/gcc42 |
|---|
| 138 | :info:configure checking build system type... i386-apple-darwin10.8.0 |
|---|
| 139 | :info:configure checking host system type... i386-apple-darwin10.8.0 |
|---|
| 140 | :info:configure checking target system type... i386-apple-darwin10.8.0 |
|---|
| 141 | :info:configure checking for gcc... /usr/bin/gcc-4.2 |
|---|
| 142 | :info:configure checking for C compiler default output file name... a.out |
|---|
| 143 | :info:configure checking whether the C compiler works... yes |
|---|
| 144 | :info:configure checking whether we are cross compiling... no |
|---|
| 145 | :info:configure checking for suffix of executables... |
|---|
| 146 | :info:configure checking for suffix of object files... o |
|---|
| 147 | :info:configure checking whether we are using the GNU C compiler... yes |
|---|
| 148 | :info:configure checking whether /usr/bin/gcc-4.2 accepts -g... yes |
|---|
| 149 | :info:configure checking for /usr/bin/gcc-4.2 option to accept ANSI C... none needed |
|---|
| 150 | :info:configure checking how to run the C preprocessor... /usr/bin/gcc-4.2 -E |
|---|
| 151 | :info:configure checking for whoami... /usr/bin/whoami |
|---|
| 152 | :info:configure checking whether nested functions work... no |
|---|
| 153 | :info:configure checking the Objective-C runtime... GNU |
|---|
| 154 | :info:configure checking for custom shared objc library... NONE |
|---|
| 155 | :info:configure checking for egrep... grep -E |
|---|
| 156 | :info:configure checking for ANSI C header files... yes |
|---|
| 157 | :info:configure checking for sys/types.h... yes |
|---|
| 158 | :info:configure checking for sys/stat.h... yes |
|---|
| 159 | :info:configure checking for stdlib.h... yes |
|---|
| 160 | :info:configure checking for string.h... yes |
|---|
| 161 | :info:configure checking for memory.h... yes |
|---|
| 162 | :info:configure checking for strings.h... yes |
|---|
| 163 | :info:configure checking for inttypes.h... yes |
|---|
| 164 | :info:configure checking for stdint.h... yes |
|---|
| 165 | :info:configure checking for unistd.h... yes |
|---|
| 166 | :info:configure checking objc/objc.h usability... yes |
|---|
| 167 | :info:configure checking objc/objc.h presence... yes |
|---|
| 168 | :info:configure checking for objc/objc.h... yes |
|---|
| 169 | :info:configure configure: for gdomap network details |
|---|
| 170 | :info:configure checking for variable length socket addresses... found |
|---|
| 171 | :info:configure checking for gcc visibility attribute support... not present |
|---|
| 172 | :info:configure checking whether SO_REUSEADDR is broken... no |
|---|
| 173 | :info:configure checking for objc threading flags... |
|---|
| 174 | :info:configure checking whether byte ordering is bigendian... no |
|---|
| 175 | :info:configure checking for void*... yes |
|---|
| 176 | :info:configure checking size of void*... 8 |
|---|
| 177 | :info:configure checking for short... yes |
|---|
| 178 | :info:configure checking size of short... 2 |
|---|
| 179 | :info:configure checking for int... yes |
|---|
| 180 | :info:configure checking size of int... 4 |
|---|
| 181 | :info:configure checking for long... yes |
|---|
| 182 | :info:configure checking size of long... 8 |
|---|
| 183 | :info:configure checking for long long... yes |
|---|
| 184 | :info:configure checking size of long long... 8 |
|---|
| 185 | :info:configure checking for float... yes |
|---|
| 186 | :info:configure checking size of float... 4 |
|---|
| 187 | :info:configure checking for double... yes |
|---|
| 188 | :info:configure checking size of double... 8 |
|---|
| 189 | :info:configure checking loading of constructor functions... yes |
|---|
| 190 | :info:configure checking dlfcn.h usability... yes |
|---|
| 191 | :info:configure checking dlfcn.h presence... yes |
|---|
| 192 | :info:configure checking for dlfcn.h... yes |
|---|
| 193 | :info:configure checking for dynamic linker type... simple |
|---|
| 194 | :info:configure checking for dladdr in -ldl... yes |
|---|
| 195 | :info:configure checking whether objc really works... no |
|---|
| 196 | :info:configure I don't seem to be able to use your Objective-C compiler to produce |
|---|
| 197 | :info:configure working binaries! Please check your Objective-C compiler installation. |
|---|
| 198 | :info:configure If you are using gcc-3.x make sure that your compiler's libgcc_s and libobjc |
|---|
| 199 | :info:configure can be found by the dynamic linker - usually that requires you to play |
|---|
| 200 | :info:configure with LD_LIBRARY_PATH or /etc/ld.so.conf. |
|---|
| 201 | :info:configure Please refer to your compiler installation instructions for more help. |
|---|
| 202 | :info:configure configure: error: The Objective-C compiler does not work or is not installed properly. |
|---|
| 203 | :info:configure shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnustep_gnustep-base/gnustep-base/work/gnustep-base-1.19.1" && ./configure --prefix=/opt/local CC=/usr/bin/gcc-4.2 GNUSTEP_MAKEFILES=/opt/local/share/GNUstep/Makefiles --disable-tls --enable-libffi --with-ffi-include=/opt/local/include/gcc42 --with-ffi-library=/opt/local/lib/gcc42 " returned error 1 |
|---|
| 204 | :error:configure Target org.macports.configure returned: configure failure: shell command failed (see log for details) |
|---|
| 205 | :debug:configure Backtrace: configure failure: shell command failed (see log for details) |
|---|
| 206 | while executing |
|---|
| 207 | "$procedure $targetname" |
|---|
| 208 | :info:configure Warning: the following items did not execute (for gnustep-base): org.macports.activate org.macports.configure org.macports.build org.macports.destroot org.macports.install |
|---|
| 209 | :notice:configure Log for gnustep-base is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnustep_gnustep-base/gnustep-base/main.log |
|---|
