Ticket #23533: py26-spyder-LOG.txt

File py26-spyder-LOG.txt, 143.1 KB (added by Alberto.Verga@…, 14 years ago)

py26-spyder output of the debug install command

Line 
1mactineke:~ verga$ sudo port -d install py26-spyder
2DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-spyder
3DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-spyder
4DEBUG: OS Platform: darwin
5DEBUG: OS Version: 10.2.0
6DEBUG: Mac OS X Version: 10.6
7DEBUG: System Arch: i386
8DEBUG: setting option os.universal_supported to yes
9DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
10DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
11DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
12DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl
13DEBUG: not using configure, so not adding the default universal variant
14DEBUG: Requested variant darwin is not provided by port py26-spyder.
15DEBUG: Requested variant i386 is not provided by port py26-spyder.
16DEBUG: Requested variant macosx is not provided by port py26-spyder.
17DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python26
18DEBUG: epoch: in tree: 0 installed: 0
19DEBUG: python26 2.6.4_0 exists in the ports tree
20DEBUG: python26 2.6.4_0 +darwin is the latest installed
21DEBUG: python26 2.6.4_0 +darwin is active
22DEBUG: Merging existing variants darwin into variants
23DEBUG: new fully merged portvariants:
24DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python26
25DEBUG: OS Platform: darwin
26DEBUG: OS Version: 10.2.0
27DEBUG: Mac OS X Version: 10.6
28DEBUG: System Arch: i386
29DEBUG: setting option os.universal_supported to yes
30DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
31DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
32DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
33DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
34DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
35DEBUG: universal variant already exists, so not adding the default one
36DEBUG: Requested variant i386 is not provided by port python26.
37DEBUG: Requested variant macosx is not provided by port python26.
38DEBUG: Executing variant darwin provides darwin
39DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
40DEBUG: epoch: in tree: 0 installed: 0
41DEBUG: gettext 0.17_4 exists in the ports tree
42DEBUG: gettext 0.17_4  is the latest installed
43DEBUG: gettext 0.17_4  is active
44DEBUG: Merging existing variants  into variants
45DEBUG: new fully merged portvariants:
46DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
47DEBUG: OS Platform: darwin
48DEBUG: OS Version: 10.2.0
49DEBUG: Mac OS X Version: 10.6
50DEBUG: System Arch: i386
51DEBUG: setting option os.universal_supported to yes
52DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
53DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
54DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
55DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
56DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
57DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
58DEBUG: universal variant already exists, so not adding the default one
59DEBUG: Requested variant darwin is not provided by port gettext.
60DEBUG: Requested variant i386 is not provided by port gettext.
61DEBUG: Requested variant macosx is not provided by port gettext.
62DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
63DEBUG: epoch: in tree: 0 installed: 0
64DEBUG: libiconv 1.13.1_0 exists in the ports tree
65DEBUG: libiconv 1.13.1_0  is the latest installed
66DEBUG: libiconv 1.13.1_0  is active
67DEBUG: Merging existing variants  into variants
68DEBUG: new fully merged portvariants:
69DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
70DEBUG: OS Platform: darwin
71DEBUG: OS Version: 10.2.0
72DEBUG: Mac OS X Version: 10.6
73DEBUG: System Arch: i386
74DEBUG: setting option os.universal_supported to yes
75DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
76DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
77DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
78DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
79DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
80DEBUG: universal variant already exists, so not adding the default one
81DEBUG: Requested variant darwin is not provided by port libiconv.
82DEBUG: Requested variant i386 is not provided by port libiconv.
83DEBUG: Requested variant macosx is not provided by port libiconv.
84DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
85DEBUG: epoch: in tree: 0 installed: 0
86DEBUG: gperf 3.0.4_0 exists in the ports tree
87DEBUG: gperf 3.0.4_0  is the latest installed
88DEBUG: gperf 3.0.4_0  is active
89DEBUG: Merging existing variants  into variants
90DEBUG: new fully merged portvariants:
91DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
92DEBUG: OS Platform: darwin
93DEBUG: OS Version: 10.2.0
94DEBUG: Mac OS X Version: 10.6
95DEBUG: System Arch: i386
96DEBUG: setting option os.universal_supported to yes
97DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
98DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
99DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
100DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
101DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
102DEBUG: universal variant already exists, so not adding the default one
103DEBUG: Requested variant darwin is not provided by port gperf.
104DEBUG: Requested variant i386 is not provided by port gperf.
105DEBUG: Requested variant macosx is not provided by port gperf.
106DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0
107DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
108DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
109DEBUG: epoch: in tree: 0 installed: 0
110DEBUG: ncurses 5.7_0 exists in the ports tree
111DEBUG: ncurses 5.7_0 +darwin_10 is the latest installed
112DEBUG: ncurses 5.7_0 +darwin_10 is active
113DEBUG: Merging existing variants darwin_10 into variants
114DEBUG: new fully merged portvariants:
115DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
116DEBUG: OS Platform: darwin
117DEBUG: OS Version: 10.2.0
118DEBUG: Mac OS X Version: 10.6
119DEBUG: System Arch: i386
120DEBUG: setting option os.universal_supported to yes
121DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
122DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
123DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
124DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
125DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
126DEBUG: universal variant already exists, so not adding the default one
127DEBUG: Requested variant darwin is not provided by port ncurses.
128DEBUG: Requested variant i386 is not provided by port ncurses.
129DEBUG: Requested variant macosx is not provided by port ncurses.
130DEBUG: Executing variant darwin_10 provides darwin_10
131DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
132DEBUG: epoch: in tree: 0 installed: 0
133DEBUG: ncursesw 5.7_0 exists in the ports tree
134DEBUG: ncursesw 5.7_0 +darwin_10 is the latest installed
135DEBUG: ncursesw 5.7_0 +darwin_10 is active
136DEBUG: Merging existing variants darwin_10 into variants
137DEBUG: new fully merged portvariants:
138DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
139DEBUG: OS Platform: darwin
140DEBUG: OS Version: 10.2.0
141DEBUG: Mac OS X Version: 10.6
142DEBUG: System Arch: i386
143DEBUG: setting option os.universal_supported to yes
144DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
145DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
146DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
147DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
148DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
149DEBUG: universal variant already exists, so not adding the default one
150DEBUG: Requested variant darwin is not provided by port ncursesw.
151DEBUG: Requested variant i386 is not provided by port ncursesw.
152DEBUG: Requested variant macosx is not provided by port ncursesw.
153DEBUG: Executing variant darwin_10 provides darwin_10
154DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
155DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
156DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
157DEBUG: epoch: in tree: 0 installed: 0
158DEBUG: expat 2.0.1_0 exists in the ports tree
159DEBUG: expat 2.0.1_0  is the latest installed
160DEBUG: expat 2.0.1_0  is active
161DEBUG: Merging existing variants  into variants
162DEBUG: new fully merged portvariants:
163DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
164DEBUG: OS Platform: darwin
165DEBUG: OS Version: 10.2.0
166DEBUG: Mac OS X Version: 10.6
167DEBUG: System Arch: i386
168DEBUG: setting option os.universal_supported to yes
169DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
170DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
171DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
172DEBUG: adding the default universal variant
173DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
174DEBUG: Requested variant darwin is not provided by port expat.
175DEBUG: Requested variant i386 is not provided by port expat.
176DEBUG: Requested variant macosx is not provided by port expat.
177DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
178DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4
179DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
180DEBUG: epoch: in tree: 0 installed: 0
181DEBUG: zlib 1.2.3_4 exists in the ports tree
182DEBUG: zlib 1.2.3_4  is the latest installed
183DEBUG: zlib 1.2.3_4  is active
184DEBUG: Merging existing variants  into variants
185DEBUG: new fully merged portvariants:
186DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
187DEBUG: OS Platform: darwin
188DEBUG: OS Version: 10.2.0
189DEBUG: Mac OS X Version: 10.6
190DEBUG: System Arch: i386
191DEBUG: setting option os.universal_supported to yes
192DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
193DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
194DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
195DEBUG: adding the default universal variant
196DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
197DEBUG: Requested variant darwin is not provided by port zlib.
198DEBUG: Requested variant i386 is not provided by port zlib.
199DEBUG: Requested variant macosx is not provided by port zlib.
200DEBUG: No need to upgrade! zlib 1.2.3_4 >= zlib 1.2.3_4
201DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
202DEBUG: epoch: in tree: 1 installed: 1
203DEBUG: openssl 0.9.8l_0 exists in the ports tree
204DEBUG: openssl 0.9.8l_0 +darwin is the latest installed
205DEBUG: openssl 0.9.8l_0 +darwin is active
206DEBUG: Merging existing variants darwin into variants
207DEBUG: new fully merged portvariants:
208DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
209DEBUG: OS Platform: darwin
210DEBUG: OS Version: 10.2.0
211DEBUG: Mac OS X Version: 10.6
212DEBUG: System Arch: i386
213DEBUG: setting option os.universal_supported to yes
214DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
215DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
216DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
217DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
218DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
219DEBUG: universal variant already exists, so not adding the default one
220DEBUG: Requested variant i386 is not provided by port openssl.
221DEBUG: Requested variant macosx is not provided by port openssl.
222DEBUG: Executing variant darwin provides darwin
223DEBUG: No need to upgrade! openssl 0.9.8l_0 >= openssl 0.9.8l_0
224DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/tk
225DEBUG: epoch: in tree: 0 installed: 0
226DEBUG: tk 8.5.8_0 exists in the ports tree
227DEBUG: tk 8.5.8_0 +darwin is the latest installed
228DEBUG: tk 8.5.8_0 +darwin is active
229DEBUG: Merging existing variants darwin into variants
230DEBUG: new fully merged portvariants:
231DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/tk
232DEBUG: OS Platform: darwin
233DEBUG: OS Version: 10.2.0
234DEBUG: Mac OS X Version: 10.6
235DEBUG: System Arch: i386
236DEBUG: setting option os.universal_supported to yes
237DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
238DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
239DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
240DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
241DEBUG: adding the default universal variant
242DEBUG: Requested variant i386 is not provided by port tk.
243DEBUG: Requested variant macosx is not provided by port tk.
244DEBUG: Executing variant darwin provides darwin
245DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
246DEBUG: epoch: in tree: 0 installed: 0
247DEBUG: pkgconfig 0.23_1 exists in the ports tree
248DEBUG: pkgconfig 0.23_1  is the latest installed
249DEBUG: pkgconfig 0.23_1  is active
250DEBUG: Merging existing variants  into variants
251DEBUG: new fully merged portvariants:
252DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
253DEBUG: OS Platform: darwin
254DEBUG: OS Version: 10.2.0
255DEBUG: Mac OS X Version: 10.6
256DEBUG: System Arch: i386
257DEBUG: setting option os.universal_supported to yes
258DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
259DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
260DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
261DEBUG: adding the default universal variant
262DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
263DEBUG: Requested variant darwin is not provided by port pkgconfig.
264DEBUG: Requested variant i386 is not provided by port pkgconfig.
265DEBUG: Requested variant macosx is not provided by port pkgconfig.
266DEBUG: No need to upgrade! pkgconfig 0.23_1 >= pkgconfig 0.23_1
267DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/tcl
268DEBUG: epoch: in tree: 0 installed: 0
269DEBUG: tcl 8.5.8_0 exists in the ports tree
270DEBUG: tcl 8.5.8_0 +darwin is the latest installed
271DEBUG: tcl 8.5.8_0 +darwin is active
272DEBUG: Merging existing variants darwin into variants
273DEBUG: new fully merged portvariants:
274DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/tcl
275DEBUG: OS Platform: darwin
276DEBUG: OS Version: 10.2.0
277DEBUG: Mac OS X Version: 10.6
278DEBUG: System Arch: i386
279DEBUG: setting option os.universal_supported to yes
280DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
281DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
282DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
283DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
284DEBUG: adding the default universal variant
285DEBUG: Requested variant i386 is not provided by port tcl.
286DEBUG: Requested variant macosx is not provided by port tcl.
287DEBUG: Executing variant darwin provides darwin
288DEBUG: No need to upgrade! tcl 8.5.8_0 >= tcl 8.5.8_0
289DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2
290DEBUG: epoch: in tree: 0 installed: 0
291DEBUG: Xft2 2.1.14_0 exists in the ports tree
292DEBUG: Xft2 2.1.14_0  is the latest installed
293DEBUG: Xft2 2.1.14_0  is active
294DEBUG: Merging existing variants  into variants
295DEBUG: new fully merged portvariants:
296DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2
297DEBUG: OS Platform: darwin
298DEBUG: OS Version: 10.2.0
299DEBUG: Mac OS X Version: 10.6
300DEBUG: System Arch: i386
301DEBUG: setting option os.universal_supported to yes
302DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
303DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
304DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
305DEBUG: adding the default universal variant
306DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
307DEBUG: Requested variant darwin is not provided by port Xft2.
308DEBUG: Requested variant i386 is not provided by port Xft2.
309DEBUG: Requested variant macosx is not provided by port Xft2.
310DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender
311DEBUG: epoch: in tree: 0 installed: 0
312DEBUG: xrender 0.9.5_0 exists in the ports tree
313DEBUG: xrender 0.9.5_0  is the latest installed
314DEBUG: xrender 0.9.5_0  is active
315DEBUG: Merging existing variants  into variants
316DEBUG: new fully merged portvariants:
317DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender
318DEBUG: OS Platform: darwin
319DEBUG: OS Version: 10.2.0
320DEBUG: Mac OS X Version: 10.6
321DEBUG: System Arch: i386
322DEBUG: setting option os.universal_supported to yes
323DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
324DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
325DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
326DEBUG: adding the default universal variant
327DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
328DEBUG: Requested variant darwin is not provided by port xrender.
329DEBUG: Requested variant i386 is not provided by port xrender.
330DEBUG: Requested variant macosx is not provided by port xrender.
331DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11
332DEBUG: epoch: in tree: 0 installed: 0
333DEBUG: xorg-libX11 1.3.3_0 exists in the ports tree
334DEBUG: xorg-libX11 1.3.3_0  is the latest installed
335DEBUG: xorg-libX11 1.3.3_0  is active
336DEBUG: Merging existing variants  into variants
337DEBUG: new fully merged portvariants:
338DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11
339DEBUG: OS Platform: darwin
340DEBUG: OS Version: 10.2.0
341DEBUG: Mac OS X Version: 10.6
342DEBUG: System Arch: i386
343DEBUG: setting option os.universal_supported to yes
344DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
345DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
346DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
347DEBUG: adding the default universal variant
348DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
349DEBUG: Requested variant darwin is not provided by port xorg-libX11.
350DEBUG: Requested variant i386 is not provided by port xorg-libX11.
351DEBUG: Requested variant macosx is not provided by port xorg-libX11.
352DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-util-macros
353DEBUG: epoch: in tree: 0 installed: 0
354DEBUG: xorg-util-macros 1.5.0_0 exists in the ports tree
355DEBUG: xorg-util-macros 1.5.0_0  is the latest installed
356DEBUG: xorg-util-macros 1.5.0_0  is active
357DEBUG: Merging existing variants  into variants
358DEBUG: new fully merged portvariants:
359DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-util-macros
360DEBUG: OS Platform: darwin
361DEBUG: OS Version: 10.2.0
362DEBUG: Mac OS X Version: 10.6
363DEBUG: System Arch: i386
364DEBUG: setting option os.universal_supported to yes
365DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
366DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
367DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
368DEBUG: 'universal_variant no' specified, so not adding the default universal variant
369DEBUG: Requested variant darwin is not provided by port xorg-util-macros.
370DEBUG: Requested variant i386 is not provided by port xorg-util-macros.
371DEBUG: Requested variant macosx is not provided by port xorg-util-macros.
372DEBUG: No need to upgrade! xorg-util-macros 1.5.0_0 >= xorg-util-macros 1.5.0_0
373DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xtrans
374DEBUG: epoch: in tree: 0 installed: 0
375DEBUG: xorg-xtrans 1.2.5_0 exists in the ports tree
376DEBUG: xorg-xtrans 1.2.5_0  is the latest installed
377DEBUG: xorg-xtrans 1.2.5_0  is active
378DEBUG: Merging existing variants  into variants
379DEBUG: new fully merged portvariants:
380DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xtrans
381DEBUG: OS Platform: darwin
382DEBUG: OS Version: 10.2.0
383DEBUG: Mac OS X Version: 10.6
384DEBUG: System Arch: i386
385DEBUG: setting option os.universal_supported to yes
386DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
387DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
388DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
389DEBUG: 'universal_variant no' specified, so not adding the default universal variant
390DEBUG: Requested variant darwin is not provided by port xorg-xtrans.
391DEBUG: Requested variant i386 is not provided by port xorg-xtrans.
392DEBUG: Requested variant macosx is not provided by port xorg-xtrans.
393DEBUG: No need to upgrade! xorg-xtrans 1.2.5_0 >= xorg-xtrans 1.2.5_0
394DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-bigreqsproto
395DEBUG: epoch: in tree: 0 installed: 0
396DEBUG: xorg-bigreqsproto 1.1.0_0 exists in the ports tree
397DEBUG: xorg-bigreqsproto 1.1.0_0  is the latest installed
398DEBUG: xorg-bigreqsproto 1.1.0_0  is active
399DEBUG: Merging existing variants  into variants
400DEBUG: new fully merged portvariants:
401DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-bigreqsproto
402DEBUG: OS Platform: darwin
403DEBUG: OS Version: 10.2.0
404DEBUG: Mac OS X Version: 10.6
405DEBUG: System Arch: i386
406DEBUG: setting option os.universal_supported to yes
407DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
408DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
409DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
410DEBUG: 'universal_variant no' specified, so not adding the default universal variant
411DEBUG: Requested variant darwin is not provided by port xorg-bigreqsproto.
412DEBUG: Requested variant i386 is not provided by port xorg-bigreqsproto.
413DEBUG: Requested variant macosx is not provided by port xorg-bigreqsproto.
414DEBUG: No need to upgrade! xorg-bigreqsproto 1.1.0_0 >= xorg-bigreqsproto 1.1.0_0
415DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcmiscproto
416DEBUG: epoch: in tree: 0 installed: 0
417DEBUG: xorg-xcmiscproto 1.2.0_0 exists in the ports tree
418DEBUG: xorg-xcmiscproto 1.2.0_0  is the latest installed
419DEBUG: xorg-xcmiscproto 1.2.0_0  is active
420DEBUG: Merging existing variants  into variants
421DEBUG: new fully merged portvariants:
422DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcmiscproto
423DEBUG: OS Platform: darwin
424DEBUG: OS Version: 10.2.0
425DEBUG: Mac OS X Version: 10.6
426DEBUG: System Arch: i386
427DEBUG: setting option os.universal_supported to yes
428DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
429DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
430DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
431DEBUG: 'universal_variant no' specified, so not adding the default universal variant
432DEBUG: Requested variant darwin is not provided by port xorg-xcmiscproto.
433DEBUG: Requested variant i386 is not provided by port xorg-xcmiscproto.
434DEBUG: Requested variant macosx is not provided by port xorg-xcmiscproto.
435DEBUG: No need to upgrade! xorg-xcmiscproto 1.2.0_0 >= xorg-xcmiscproto 1.2.0_0
436DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto
437DEBUG: epoch: in tree: 0 installed: 0
438DEBUG: xorg-xextproto 7.1.1_0 exists in the ports tree
439DEBUG: xorg-xextproto 7.1.1_0  is the latest installed
440DEBUG: xorg-xextproto 7.1.1_0  is active
441DEBUG: Merging existing variants  into variants
442DEBUG: new fully merged portvariants:
443DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto
444DEBUG: OS Platform: darwin
445DEBUG: OS Version: 10.2.0
446DEBUG: Mac OS X Version: 10.6
447DEBUG: System Arch: i386
448DEBUG: setting option os.universal_supported to yes
449DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
450DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
451DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
452DEBUG: 'universal_variant no' specified, so not adding the default universal variant
453DEBUG: Requested variant darwin is not provided by port xorg-xextproto.
454DEBUG: Requested variant i386 is not provided by port xorg-xextproto.
455DEBUG: Requested variant macosx is not provided by port xorg-xextproto.
456DEBUG: No need to upgrade! xorg-xextproto 7.1.1_0 >= xorg-xextproto 7.1.1_0
457DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xf86bigfontproto
458DEBUG: epoch: in tree: 0 installed: 0
459DEBUG: xorg-xf86bigfontproto 1.2.0_0 exists in the ports tree
460DEBUG: xorg-xf86bigfontproto 1.2.0_0  is the latest installed
461DEBUG: xorg-xf86bigfontproto 1.2.0_0  is active
462DEBUG: Merging existing variants  into variants
463DEBUG: new fully merged portvariants:
464DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xf86bigfontproto
465DEBUG: OS Platform: darwin
466DEBUG: OS Version: 10.2.0
467DEBUG: Mac OS X Version: 10.6
468DEBUG: System Arch: i386
469DEBUG: setting option os.universal_supported to yes
470DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
471DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
472DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
473DEBUG: 'universal_variant no' specified, so not adding the default universal variant
474DEBUG: Requested variant darwin is not provided by port xorg-xf86bigfontproto.
475DEBUG: Requested variant i386 is not provided by port xorg-xf86bigfontproto.
476DEBUG: Requested variant macosx is not provided by port xorg-xf86bigfontproto.
477DEBUG: No need to upgrade! xorg-xf86bigfontproto 1.2.0_0 >= xorg-xf86bigfontproto 1.2.0_0
478DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-inputproto
479DEBUG: epoch: in tree: 0 installed: 0
480DEBUG: xorg-inputproto 2.0_0 exists in the ports tree
481DEBUG: xorg-inputproto 2.0_0  is the latest installed
482DEBUG: xorg-inputproto 2.0_0  is active
483DEBUG: Merging existing variants  into variants
484DEBUG: new fully merged portvariants:
485DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-inputproto
486DEBUG: OS Platform: darwin
487DEBUG: OS Version: 10.2.0
488DEBUG: Mac OS X Version: 10.6
489DEBUG: System Arch: i386
490DEBUG: setting option os.universal_supported to yes
491DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
492DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
493DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
494DEBUG: 'universal_variant no' specified, so not adding the default universal variant
495DEBUG: Requested variant darwin is not provided by port xorg-inputproto.
496DEBUG: Requested variant i386 is not provided by port xorg-inputproto.
497DEBUG: Requested variant macosx is not provided by port xorg-inputproto.
498DEBUG: No need to upgrade! xorg-inputproto 2.0_0 >= xorg-inputproto 2.0_0
499DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp
500DEBUG: epoch: in tree: 0 installed: 0
501DEBUG: xorg-libXdmcp 1.0.3_0 exists in the ports tree
502DEBUG: xorg-libXdmcp 1.0.3_0  is the latest installed
503DEBUG: xorg-libXdmcp 1.0.3_0  is active
504DEBUG: Merging existing variants  into variants
505DEBUG: new fully merged portvariants:
506DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp
507DEBUG: OS Platform: darwin
508DEBUG: OS Version: 10.2.0
509DEBUG: Mac OS X Version: 10.6
510DEBUG: System Arch: i386
511DEBUG: setting option os.universal_supported to yes
512DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
513DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
514DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
515DEBUG: adding the default universal variant
516DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
517DEBUG: Requested variant darwin is not provided by port xorg-libXdmcp.
518DEBUG: Requested variant i386 is not provided by port xorg-libXdmcp.
519DEBUG: Requested variant macosx is not provided by port xorg-libXdmcp.
520DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto
521DEBUG: epoch: in tree: 0 installed: 0
522DEBUG: xorg-xproto 7.0.16_0 exists in the ports tree
523DEBUG: xorg-xproto 7.0.16_0  is the latest installed
524DEBUG: xorg-xproto 7.0.16_0  is active
525DEBUG: Merging existing variants  into variants
526DEBUG: new fully merged portvariants:
527DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto
528DEBUG: OS Platform: darwin
529DEBUG: OS Version: 10.2.0
530DEBUG: Mac OS X Version: 10.6
531DEBUG: System Arch: i386
532DEBUG: setting option os.universal_supported to yes
533DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
534DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
535DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
536DEBUG: 'universal_variant no' specified, so not adding the default universal variant
537DEBUG: Requested variant darwin is not provided by port xorg-xproto.
538DEBUG: Requested variant i386 is not provided by port xorg-xproto.
539DEBUG: Requested variant macosx is not provided by port xorg-xproto.
540DEBUG: No need to upgrade! xorg-xproto 7.0.16_0 >= xorg-xproto 7.0.16_0
541DEBUG: No need to upgrade! xorg-libXdmcp 1.0.3_0 >= xorg-libXdmcp 1.0.3_0
542DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau
543DEBUG: epoch: in tree: 0 installed: 0
544DEBUG: xorg-libXau 1.0.5_0 exists in the ports tree
545DEBUG: xorg-libXau 1.0.5_0  is the latest installed
546DEBUG: xorg-libXau 1.0.5_0  is active
547DEBUG: Merging existing variants  into variants
548DEBUG: new fully merged portvariants:
549DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau
550DEBUG: OS Platform: darwin
551DEBUG: OS Version: 10.2.0
552DEBUG: Mac OS X Version: 10.6
553DEBUG: System Arch: i386
554DEBUG: setting option os.universal_supported to yes
555DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
556DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
557DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
558DEBUG: adding the default universal variant
559DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
560DEBUG: Requested variant darwin is not provided by port xorg-libXau.
561DEBUG: Requested variant i386 is not provided by port xorg-libXau.
562DEBUG: Requested variant macosx is not provided by port xorg-libXau.
563DEBUG: No need to upgrade! xorg-libXau 1.0.5_0 >= xorg-libXau 1.0.5_0
564DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto
565DEBUG: epoch: in tree: 0 installed: 0
566DEBUG: xorg-kbproto 1.0.4_0 exists in the ports tree
567DEBUG: xorg-kbproto 1.0.4_0  is the latest installed
568DEBUG: xorg-kbproto 1.0.4_0  is active
569DEBUG: Merging existing variants  into variants
570DEBUG: new fully merged portvariants:
571DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto
572DEBUG: OS Platform: darwin
573DEBUG: OS Version: 10.2.0
574DEBUG: Mac OS X Version: 10.6
575DEBUG: System Arch: i386
576DEBUG: setting option os.universal_supported to yes
577DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
578DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
579DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
580DEBUG: 'universal_variant no' specified, so not adding the default universal variant
581DEBUG: Requested variant darwin is not provided by port xorg-kbproto.
582DEBUG: Requested variant i386 is not provided by port xorg-kbproto.
583DEBUG: Requested variant macosx is not provided by port xorg-kbproto.
584DEBUG: No need to upgrade! xorg-kbproto 1.0.4_0 >= xorg-kbproto 1.0.4_0
585DEBUG: No need to upgrade! xorg-libX11 1.3.3_0 >= xorg-libX11 1.3.3_0
586DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-renderproto
587DEBUG: epoch: in tree: 0 installed: 0
588DEBUG: xorg-renderproto 0.11_0 exists in the ports tree
589DEBUG: xorg-renderproto 0.11_0  is the latest installed
590DEBUG: xorg-renderproto 0.11_0  is active
591DEBUG: Merging existing variants  into variants
592DEBUG: new fully merged portvariants:
593DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-renderproto
594DEBUG: OS Platform: darwin
595DEBUG: OS Version: 10.2.0
596DEBUG: Mac OS X Version: 10.6
597DEBUG: System Arch: i386
598DEBUG: setting option os.universal_supported to yes
599DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
600DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
601DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
602DEBUG: 'universal_variant no' specified, so not adding the default universal variant
603DEBUG: Requested variant darwin is not provided by port xorg-renderproto.
604DEBUG: Requested variant i386 is not provided by port xorg-renderproto.
605DEBUG: Requested variant macosx is not provided by port xorg-renderproto.
606DEBUG: No need to upgrade! xorg-renderproto 0.11_0 >= xorg-renderproto 0.11_0
607DEBUG: No need to upgrade! xrender 0.9.5_0 >= xrender 0.9.5_0
608DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype
609DEBUG: epoch: in tree: 0 installed: 0
610DEBUG: freetype 2.3.11_1 exists in the ports tree
611DEBUG: freetype 2.3.11_1 +macosx is the latest installed
612DEBUG: freetype 2.3.11_1 +macosx is active
613DEBUG: Merging existing variants macosx into variants
614DEBUG: new fully merged portvariants:
615DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype
616DEBUG: OS Platform: darwin
617DEBUG: OS Version: 10.2.0
618DEBUG: Mac OS X Version: 10.6
619DEBUG: System Arch: i386
620DEBUG: setting option os.universal_supported to yes
621DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
622DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
623DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
624DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
625DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
626DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
627DEBUG: universal variant already exists, so not adding the default one
628DEBUG: Requested variant darwin is not provided by port freetype.
629DEBUG: Requested variant i386 is not provided by port freetype.
630DEBUG: Executing variant macosx provides macosx
631DEBUG: No need to upgrade! freetype 2.3.11_1 >= freetype 2.3.11_1
632DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig
633DEBUG: epoch: in tree: 0 installed: 0
634DEBUG: fontconfig 2.8.0_0 exists in the ports tree
635DEBUG: fontconfig 2.8.0_0 +macosx is the latest installed
636DEBUG: fontconfig 2.8.0_0 +macosx is active
637DEBUG: Merging existing variants macosx into variants
638DEBUG: new fully merged portvariants:
639DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig
640DEBUG: OS Platform: darwin
641DEBUG: OS Version: 10.2.0
642DEBUG: Mac OS X Version: 10.6
643DEBUG: System Arch: i386
644DEBUG: setting option os.universal_supported to yes
645DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
646DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
647DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
648DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
649DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
650DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
651DEBUG: universal variant already exists, so not adding the default one
652DEBUG: Requested variant darwin is not provided by port fontconfig.
653DEBUG: Requested variant i386 is not provided by port fontconfig.
654DEBUG: Executing variant macosx provides macosx
655DEBUG: No need to upgrade! fontconfig 2.8.0_0 >= fontconfig 2.8.0_0
656DEBUG: No need to upgrade! Xft2 2.1.14_0 >= Xft2 2.1.14_0
657DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXScrnSaver
658DEBUG: epoch: in tree: 0 installed: 0
659DEBUG: xorg-libXScrnSaver 1.2.0_0 exists in the ports tree
660DEBUG: xorg-libXScrnSaver 1.2.0_0  is the latest installed
661DEBUG: xorg-libXScrnSaver 1.2.0_0  is active
662DEBUG: Merging existing variants  into variants
663DEBUG: new fully merged portvariants:
664DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXScrnSaver
665DEBUG: OS Platform: darwin
666DEBUG: OS Version: 10.2.0
667DEBUG: Mac OS X Version: 10.6
668DEBUG: System Arch: i386
669DEBUG: setting option os.universal_supported to yes
670DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
671DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
672DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
673DEBUG: adding the default universal variant
674DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
675DEBUG: Requested variant darwin is not provided by port xorg-libXScrnSaver.
676DEBUG: Requested variant i386 is not provided by port xorg-libXScrnSaver.
677DEBUG: Requested variant macosx is not provided by port xorg-libXScrnSaver.
678DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXext
679DEBUG: epoch: in tree: 0 installed: 0
680DEBUG: xorg-libXext 1.1.1_0 exists in the ports tree
681DEBUG: xorg-libXext 1.1.1_0  is the latest installed
682DEBUG: xorg-libXext 1.1.1_0  is active
683DEBUG: Merging existing variants  into variants
684DEBUG: new fully merged portvariants:
685DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXext
686DEBUG: OS Platform: darwin
687DEBUG: OS Version: 10.2.0
688DEBUG: Mac OS X Version: 10.6
689DEBUG: System Arch: i386
690DEBUG: setting option os.universal_supported to yes
691DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
692DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
693DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
694DEBUG: adding the default universal variant
695DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
696DEBUG: Requested variant darwin is not provided by port xorg-libXext.
697DEBUG: Requested variant i386 is not provided by port xorg-libXext.
698DEBUG: Requested variant macosx is not provided by port xorg-libXext.
699DEBUG: No need to upgrade! xorg-libXext 1.1.1_0 >= xorg-libXext 1.1.1_0
700DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-scrnsaverproto
701DEBUG: epoch: in tree: 0 installed: 0
702DEBUG: xorg-scrnsaverproto 1.2.0_0 exists in the ports tree
703DEBUG: xorg-scrnsaverproto 1.2.0_0  is the latest installed
704DEBUG: xorg-scrnsaverproto 1.2.0_0  is active
705DEBUG: Merging existing variants  into variants
706DEBUG: new fully merged portvariants:
707DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-scrnsaverproto
708DEBUG: OS Platform: darwin
709DEBUG: OS Version: 10.2.0
710DEBUG: Mac OS X Version: 10.6
711DEBUG: System Arch: i386
712DEBUG: setting option os.universal_supported to yes
713DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
714DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
715DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
716DEBUG: 'universal_variant no' specified, so not adding the default universal variant
717DEBUG: Requested variant darwin is not provided by port xorg-scrnsaverproto.
718DEBUG: Requested variant i386 is not provided by port xorg-scrnsaverproto.
719DEBUG: Requested variant macosx is not provided by port xorg-scrnsaverproto.
720DEBUG: No need to upgrade! xorg-scrnsaverproto 1.2.0_0 >= xorg-scrnsaverproto 1.2.0_0
721DEBUG: No need to upgrade! xorg-libXScrnSaver 1.2.0_0 >= xorg-libXScrnSaver 1.2.0_0
722DEBUG: No need to upgrade! tk 8.5.8_0 >= tk 8.5.8_0
723DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3
724DEBUG: epoch: in tree: 0 installed: 0
725DEBUG: sqlite3 3.6.22_0 exists in the ports tree
726DEBUG: sqlite3 3.6.22_0  is the latest installed
727DEBUG: sqlite3 3.6.22_0  is active
728DEBUG: Merging existing variants  into variants
729DEBUG: new fully merged portvariants:
730DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3
731DEBUG: OS Platform: darwin
732DEBUG: OS Version: 10.2.0
733DEBUG: Mac OS X Version: 10.6
734DEBUG: System Arch: i386
735DEBUG: setting option os.universal_supported to yes
736DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
737DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
738DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
739DEBUG: adding the default universal variant
740DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
741DEBUG: Requested variant darwin is not provided by port sqlite3.
742DEBUG: Requested variant i386 is not provided by port sqlite3.
743DEBUG: Requested variant macosx is not provided by port sqlite3.
744DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
745DEBUG: epoch: in tree: 0 installed: 0
746DEBUG: readline 6.1.000_1 exists in the ports tree
747DEBUG: readline 6.1.000_1 +darwin is the latest installed
748DEBUG: readline 6.1.000_1 +darwin is active
749DEBUG: Merging existing variants darwin into variants
750DEBUG: new fully merged portvariants:
751DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
752DEBUG: OS Platform: darwin
753DEBUG: OS Version: 10.2.0
754DEBUG: Mac OS X Version: 10.6
755DEBUG: System Arch: i386
756DEBUG: setting option os.universal_supported to yes
757DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
758DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
759DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
760DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
761DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
762DEBUG: universal variant already exists, so not adding the default one
763DEBUG: Requested variant i386 is not provided by port readline.
764DEBUG: Requested variant macosx is not provided by port readline.
765DEBUG: Executing variant darwin provides darwin
766DEBUG: No need to upgrade! readline 6.1.000_1 >= readline 6.1.000_1
767DEBUG: No need to upgrade! sqlite3 3.6.22_0 >= sqlite3 3.6.22_0
768DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46
769DEBUG: epoch: in tree: 0 installed: 0
770DEBUG: db46 4.6.21_6 exists in the ports tree
771DEBUG: db46 4.6.21_6  is the latest installed
772DEBUG: db46 4.6.21_6  is active
773DEBUG: Merging existing variants  into variants
774DEBUG: new fully merged portvariants:
775DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46
776DEBUG: OS Platform: darwin
777DEBUG: OS Version: 10.2.0
778DEBUG: Mac OS X Version: 10.6
779DEBUG: System Arch: i386
780DEBUG: setting option os.universal_supported to yes
781DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
782DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
783DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
784DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
785DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
786DEBUG: universal variant already exists, so not adding the default one
787DEBUG: Requested variant darwin is not provided by port db46.
788DEBUG: Requested variant i386 is not provided by port db46.
789DEBUG: Requested variant macosx is not provided by port db46.
790DEBUG: No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6
791DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm
792DEBUG: epoch: in tree: 0 installed: 0
793DEBUG: gdbm 1.8.3_2 exists in the ports tree
794DEBUG: gdbm 1.8.3_2  is the latest installed
795DEBUG: gdbm 1.8.3_2  is active
796DEBUG: Merging existing variants  into variants
797DEBUG: new fully merged portvariants:
798DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm
799DEBUG: OS Platform: darwin
800DEBUG: OS Version: 10.2.0
801DEBUG: Mac OS X Version: 10.6
802DEBUG: System Arch: i386
803DEBUG: setting option os.universal_supported to yes
804DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
805DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
806DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
807DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
808DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
809DEBUG: universal variant already exists, so not adding the default one
810DEBUG: Requested variant darwin is not provided by port gdbm.
811DEBUG: Requested variant i386 is not provided by port gdbm.
812DEBUG: Requested variant macosx is not provided by port gdbm.
813DEBUG: No need to upgrade! gdbm 1.8.3_2 >= gdbm 1.8.3_2
814DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
815DEBUG: epoch: in tree: 0 installed: 0
816DEBUG: bzip2 1.0.5_3 exists in the ports tree
817DEBUG: bzip2 1.0.5_3 +darwin is the latest installed
818DEBUG: bzip2 1.0.5_3 +darwin is active
819DEBUG: Merging existing variants darwin into variants
820DEBUG: new fully merged portvariants:
821DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
822DEBUG: OS Platform: darwin
823DEBUG: OS Version: 10.2.0
824DEBUG: Mac OS X Version: 10.6
825DEBUG: System Arch: i386
826DEBUG: setting option os.universal_supported to yes
827DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
828DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
829DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
830DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
831DEBUG: universal variant already exists, so not adding the default one
832DEBUG: Requested variant i386 is not provided by port bzip2.
833DEBUG: Requested variant macosx is not provided by port bzip2.
834DEBUG: Executing variant darwin provides darwin
835DEBUG: No need to upgrade! bzip2 1.0.5_3 >= bzip2 1.0.5_3
836DEBUG: No need to upgrade! python26 2.6.4_0 >= python26 2.6.4_0
837DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-pyqt4
838DEBUG: epoch: in tree: 0 installed: 0
839DEBUG: py26-pyqt4 4.7_0 exists in the ports tree
840DEBUG: py26-pyqt4 4.7_0  is the latest installed
841DEBUG: py26-pyqt4 4.7_0  is active
842DEBUG: Merging existing variants  into variants
843DEBUG: new fully merged portvariants:
844DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-pyqt4
845DEBUG: OS Platform: darwin
846DEBUG: OS Version: 10.2.0
847DEBUG: Mac OS X Version: 10.6
848DEBUG: System Arch: i386
849DEBUG: setting option os.universal_supported to yes
850DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
851DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
852DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
853DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
854DEBUG: universal variant already exists, so not adding the default one
855DEBUG: Requested variant darwin is not provided by port py26-pyqt4.
856DEBUG: Requested variant i386 is not provided by port py26-pyqt4.
857DEBUG: Requested variant macosx is not provided by port py26-pyqt4.
858DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-sip
859DEBUG: epoch: in tree: 0 installed: 0
860DEBUG: py26-sip 4.10_0 exists in the ports tree
861DEBUG: py26-sip 4.10_0  is the latest installed
862DEBUG: py26-sip 4.10_0  is active
863DEBUG: Merging existing variants  into variants
864DEBUG: new fully merged portvariants:
865DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-sip
866DEBUG: OS Platform: darwin
867DEBUG: OS Version: 10.2.0
868DEBUG: Mac OS X Version: 10.6
869DEBUG: System Arch: i386
870DEBUG: setting option os.universal_supported to yes
871DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
872DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
873DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
874DEBUG: adding the default universal variant
875DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
876DEBUG: Requested variant darwin is not provided by port py26-sip.
877DEBUG: Requested variant i386 is not provided by port py26-sip.
878DEBUG: Requested variant macosx is not provided by port py26-sip.
879DEBUG: No need to upgrade! py26-sip 4.10_0 >= py26-sip 4.10_0
880DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/aqua/qt4-mac
881DEBUG: epoch: in tree: 0 installed: 0
882DEBUG: qt4-mac 4.6.1_0 exists in the ports tree
883DEBUG: qt4-mac 4.6.1_0  is the latest installed
884DEBUG: qt4-mac 4.6.1_0  is active
885DEBUG: Merging existing variants  into variants
886DEBUG: new fully merged portvariants:
887DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/aqua/qt4-mac
888DEBUG: OS Platform: darwin
889DEBUG: OS Version: 10.2.0
890DEBUG: Mac OS X Version: 10.6
891DEBUG: System Arch: i386
892DEBUG: setting option os.universal_supported to yes
893DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
894DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
895DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
896DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
897DEBUG: universal variant already exists, so not adding the default one
898DEBUG: Requested variant darwin is not provided by port qt4-mac.
899DEBUG: Requested variant i386 is not provided by port qt4-mac.
900DEBUG: Requested variant macosx is not provided by port qt4-mac.
901DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/dbus
902DEBUG: epoch: in tree: 0 installed: 0
903DEBUG: dbus 1.2.16_1 exists in the ports tree
904DEBUG: dbus 1.2.16_1  is the latest installed
905DEBUG: dbus 1.2.16_1  is active
906DEBUG: Merging existing variants  into variants
907DEBUG: new fully merged portvariants:
908DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/dbus
909DEBUG: OS Platform: darwin
910DEBUG: OS Version: 10.2.0
911DEBUG: Mac OS X Version: 10.6
912DEBUG: System Arch: i386
913DEBUG: setting option os.universal_supported to yes
914DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
915DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
916DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
917DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
918DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
919DEBUG: universal variant already exists, so not adding the default one
920DEBUG: Requested variant darwin is not provided by port dbus.
921DEBUG: Requested variant i386 is not provided by port dbus.
922DEBUG: Requested variant macosx is not provided by port dbus.
923DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
924DEBUG: epoch: in tree: 0 installed: 0
925DEBUG: autoconf 2.65_1 exists in the ports tree
926DEBUG: autoconf 2.65_1  is the latest installed
927DEBUG: autoconf 2.65_1  is active
928DEBUG: Merging existing variants  into variants
929DEBUG: new fully merged portvariants:
930DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
931DEBUG: OS Platform: darwin
932DEBUG: OS Version: 10.2.0
933DEBUG: Mac OS X Version: 10.6
934DEBUG: System Arch: i386
935DEBUG: setting option os.universal_supported to yes
936DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
937DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
938DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
939DEBUG: 'universal_variant no' specified, so not adding the default universal variant
940DEBUG: Requested variant darwin is not provided by port autoconf.
941DEBUG: Requested variant i386 is not provided by port autoconf.
942DEBUG: Requested variant macosx is not provided by port autoconf.
943DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
944DEBUG: epoch: in tree: 0 installed: 0
945DEBUG: perl5 5.8.9_0 exists in the ports tree
946DEBUG: perl5 5.8.9_0  is the latest installed
947DEBUG: perl5 5.8.9_0  is active
948DEBUG: Merging existing variants  into variants
949DEBUG: new fully merged portvariants:
950DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
951DEBUG: OS Platform: darwin
952DEBUG: OS Version: 10.2.0
953DEBUG: Mac OS X Version: 10.6
954DEBUG: System Arch: i386
955DEBUG: setting option os.universal_supported to yes
956DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
957DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
958DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
959DEBUG: 'universal_variant no' specified, so not adding the default universal variant
960DEBUG: Requested variant darwin is not provided by port perl5.
961DEBUG: Requested variant i386 is not provided by port perl5.
962DEBUG: Requested variant macosx is not provided by port perl5.
963DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
964DEBUG: epoch: in tree: 0 installed: 0
965DEBUG: perl5.8 5.8.9_3 exists in the ports tree
966DEBUG: perl5.8 5.8.9_3  is the latest installed
967DEBUG: perl5.8 5.8.9_3  is active
968DEBUG: Merging existing variants  into variants
969DEBUG: new fully merged portvariants:
970DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
971DEBUG: OS Platform: darwin
972DEBUG: OS Version: 10.2.0
973DEBUG: Mac OS X Version: 10.6
974DEBUG: System Arch: i386
975DEBUG: setting option os.universal_supported to yes
976DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
977DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
978DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
979DEBUG: adding the default universal variant
980DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
981DEBUG: Requested variant darwin is not provided by port perl5.8.
982DEBUG: Requested variant i386 is not provided by port perl5.8.
983DEBUG: Requested variant macosx is not provided by port perl5.8.
984DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3
985DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0
986DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
987DEBUG: epoch: in tree: 0 installed: 0
988DEBUG: m4 1.4.13_0 exists in the ports tree
989DEBUG: m4 1.4.13_0  is the latest installed
990DEBUG: m4 1.4.13_0  is active
991DEBUG: Merging existing variants  into variants
992DEBUG: new fully merged portvariants:
993DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
994DEBUG: OS Platform: darwin
995DEBUG: OS Version: 10.2.0
996DEBUG: Mac OS X Version: 10.6
997DEBUG: System Arch: i386
998DEBUG: setting option os.universal_supported to yes
999DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1000DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1001DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1002DEBUG: adding the default universal variant
1003DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1004DEBUG: Requested variant darwin is not provided by port m4.
1005DEBUG: Requested variant i386 is not provided by port m4.
1006DEBUG: Requested variant macosx is not provided by port m4.
1007DEBUG: No need to upgrade! m4 1.4.13_0 >= m4 1.4.13_0
1008DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
1009DEBUG: epoch: in tree: 0 installed: 0
1010DEBUG: help2man 1.37.1_1 exists in the ports tree
1011DEBUG: help2man 1.37.1_1  is the latest installed
1012DEBUG: help2man 1.37.1_1  is active
1013DEBUG: Merging existing variants  into variants
1014DEBUG: new fully merged portvariants:
1015DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
1016DEBUG: OS Platform: darwin
1017DEBUG: OS Version: 10.2.0
1018DEBUG: Mac OS X Version: 10.6
1019DEBUG: System Arch: i386
1020DEBUG: setting option os.universal_supported to yes
1021DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1022DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1023DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1024DEBUG: adding the default universal variant
1025DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1026DEBUG: Requested variant darwin is not provided by port help2man.
1027DEBUG: Requested variant i386 is not provided by port help2man.
1028DEBUG: Requested variant macosx is not provided by port help2man.
1029DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext
1030DEBUG: epoch: in tree: 0 installed: 0
1031DEBUG: p5-locale-gettext 1.05_2 exists in the ports tree
1032DEBUG: p5-locale-gettext 1.05_2  is the latest installed
1033DEBUG: p5-locale-gettext 1.05_2  is active
1034DEBUG: Merging existing variants  into variants
1035DEBUG: new fully merged portvariants:
1036DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext
1037DEBUG: OS Platform: darwin
1038DEBUG: OS Version: 10.2.0
1039DEBUG: Mac OS X Version: 10.6
1040DEBUG: System Arch: i386
1041DEBUG: setting option os.universal_supported to yes
1042DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1043DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1044DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1045DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
1046DEBUG: 'universal_variant no' specified, so not adding the default universal variant
1047DEBUG: Requested variant darwin is not provided by port p5-locale-gettext.
1048DEBUG: Requested variant i386 is not provided by port p5-locale-gettext.
1049DEBUG: Requested variant macosx is not provided by port p5-locale-gettext.
1050DEBUG: No need to upgrade! p5-locale-gettext 1.05_2 >= p5-locale-gettext 1.05_2
1051DEBUG: No need to upgrade! help2man 1.37.1_1 >= help2man 1.37.1_1
1052DEBUG: No need to upgrade! autoconf 2.65_1 >= autoconf 2.65_1
1053DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
1054DEBUG: epoch: in tree: 0 installed: 0
1055DEBUG: automake 1.11.1_0 exists in the ports tree
1056DEBUG: automake 1.11.1_0  is the latest installed
1057DEBUG: automake 1.11.1_0  is active
1058DEBUG: Merging existing variants  into variants
1059DEBUG: new fully merged portvariants:
1060DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
1061DEBUG: OS Platform: darwin
1062DEBUG: OS Version: 10.2.0
1063DEBUG: Mac OS X Version: 10.6
1064DEBUG: System Arch: i386
1065DEBUG: setting option os.universal_supported to yes
1066DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1067DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1068DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1069DEBUG: adding the default universal variant
1070DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1071DEBUG: Requested variant darwin is not provided by port automake.
1072DEBUG: Requested variant i386 is not provided by port automake.
1073DEBUG: Requested variant macosx is not provided by port automake.
1074DEBUG: No need to upgrade! automake 1.11.1_0 >= automake 1.11.1_0
1075DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
1076DEBUG: epoch: in tree: 0 installed: 0
1077DEBUG: libtool 2.2.6b_0 exists in the ports tree
1078DEBUG: libtool 2.2.6b_0  is the latest installed
1079DEBUG: libtool 2.2.6b_0  is active
1080DEBUG: Merging existing variants  into variants
1081DEBUG: new fully merged portvariants:
1082DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
1083DEBUG: OS Platform: darwin
1084DEBUG: OS Version: 10.2.0
1085DEBUG: Mac OS X Version: 10.6
1086DEBUG: System Arch: i386
1087DEBUG: setting option os.universal_supported to yes
1088DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1089DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1090DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1091DEBUG: adding the default universal variant
1092DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1093DEBUG: Requested variant darwin is not provided by port libtool.
1094DEBUG: Requested variant i386 is not provided by port libtool.
1095DEBUG: Requested variant macosx is not provided by port libtool.
1096DEBUG: No need to upgrade! libtool 2.2.6b_0 >= libtool 2.2.6b_0
1097DEBUG: No need to upgrade! dbus 1.2.16_1 >= dbus 1.2.16_1
1098DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff
1099DEBUG: epoch: in tree: 0 installed: 0
1100DEBUG: tiff 3.9.2_2 exists in the ports tree
1101DEBUG: tiff 3.9.2_2 +macosx is the latest installed
1102DEBUG: tiff 3.9.2_2 +macosx is active
1103DEBUG: Merging existing variants macosx into variants
1104DEBUG: new fully merged portvariants:
1105DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff
1106DEBUG: OS Platform: darwin
1107DEBUG: OS Version: 10.2.0
1108DEBUG: Mac OS X Version: 10.6
1109DEBUG: System Arch: i386
1110DEBUG: setting option os.universal_supported to yes
1111DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1112DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1113DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1114DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
1115DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1116DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
1117DEBUG: universal variant already exists, so not adding the default one
1118DEBUG: Requested variant darwin is not provided by port tiff.
1119DEBUG: Requested variant i386 is not provided by port tiff.
1120DEBUG: Executing variant macosx provides macosx
1121DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg
1122DEBUG: epoch: in tree: 0 installed: 0
1123DEBUG: jpeg 7_0 exists in the ports tree
1124DEBUG: jpeg 7_0  is the latest installed
1125DEBUG: jpeg 7_0  is active
1126DEBUG: Merging existing variants  into variants
1127DEBUG: new fully merged portvariants:
1128DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg
1129DEBUG: OS Platform: darwin
1130DEBUG: OS Version: 10.2.0
1131DEBUG: Mac OS X Version: 10.6
1132DEBUG: System Arch: i386
1133DEBUG: setting option os.universal_supported to yes
1134DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1135DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1136DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1137DEBUG: adding the default universal variant
1138DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1139DEBUG: Requested variant darwin is not provided by port jpeg.
1140DEBUG: Requested variant i386 is not provided by port jpeg.
1141DEBUG: Requested variant macosx is not provided by port jpeg.
1142DEBUG: No need to upgrade! jpeg 7_0 >= jpeg 7_0
1143DEBUG: No need to upgrade! tiff 3.9.2_2 >= tiff 3.9.2_2
1144DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng
1145DEBUG: epoch: in tree: 0 installed: 0
1146DEBUG: libpng 1.2.42_0 exists in the ports tree
1147DEBUG: libpng 1.2.42_0  is the latest installed
1148DEBUG: libpng 1.2.42_0  is active
1149DEBUG: Merging existing variants  into variants
1150DEBUG: new fully merged portvariants:
1151DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng
1152DEBUG: OS Platform: darwin
1153DEBUG: OS Version: 10.2.0
1154DEBUG: Mac OS X Version: 10.6
1155DEBUG: System Arch: i386
1156DEBUG: setting option os.universal_supported to yes
1157DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1158DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1159DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1160DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
1161DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1162DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
1163DEBUG: universal variant already exists, so not adding the default one
1164DEBUG: Requested variant darwin is not provided by port libpng.
1165DEBUG: Requested variant i386 is not provided by port libpng.
1166DEBUG: Requested variant macosx is not provided by port libpng.
1167DEBUG: No need to upgrade! libpng 1.2.42_0 >= libpng 1.2.42_0
1168DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libmng
1169DEBUG: epoch: in tree: 0 installed: 0
1170DEBUG: libmng 1.0.10_1 exists in the ports tree
1171DEBUG: libmng 1.0.10_1  is the latest installed
1172DEBUG: libmng 1.0.10_1  is active
1173DEBUG: Merging existing variants  into variants
1174DEBUG: new fully merged portvariants:
1175DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libmng
1176DEBUG: OS Platform: darwin
1177DEBUG: OS Version: 10.2.0
1178DEBUG: Mac OS X Version: 10.6
1179DEBUG: System Arch: i386
1180DEBUG: setting option os.universal_supported to yes
1181DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1182DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1183DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1184DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
1185DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1186DEBUG: universal variant already exists, so not adding the default one
1187DEBUG: Requested variant darwin is not provided by port libmng.
1188DEBUG: Requested variant i386 is not provided by port libmng.
1189DEBUG: Requested variant macosx is not provided by port libmng.
1190DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/lcms
1191DEBUG: epoch: in tree: 0 installed: 0
1192DEBUG: lcms 1.19_1 exists in the ports tree
1193DEBUG: lcms 1.19_1  is the latest installed
1194DEBUG: lcms 1.19_1  is active
1195DEBUG: Merging existing variants  into variants
1196DEBUG: new fully merged portvariants:
1197DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/lcms
1198DEBUG: OS Platform: darwin
1199DEBUG: OS Version: 10.2.0
1200DEBUG: Mac OS X Version: 10.6
1201DEBUG: System Arch: i386
1202DEBUG: setting option os.universal_supported to yes
1203DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1204DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1205DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1206DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
1207DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1208DEBUG: universal variant already exists, so not adding the default one
1209DEBUG: Requested variant darwin is not provided by port lcms.
1210DEBUG: Requested variant i386 is not provided by port lcms.
1211DEBUG: Requested variant macosx is not provided by port lcms.
1212DEBUG: No need to upgrade! lcms 1.19_1 >= lcms 1.19_1
1213DEBUG: No need to upgrade! libmng 1.0.10_1 >= libmng 1.0.10_1
1214DEBUG: No need to upgrade! qt4-mac 4.6.1_0 >= qt4-mac 4.6.1_0
1215DEBUG: No need to upgrade! py26-pyqt4 4.7_0 >= py26-pyqt4 4.7_0
1216DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/qscintilla
1217DEBUG: epoch: in tree: 0 installed: 0
1218DEBUG: qscintilla 2.4_0 exists in the ports tree
1219DEBUG: qscintilla 2.4_0  is the latest installed
1220DEBUG: qscintilla 2.4_0  is active
1221DEBUG: Merging existing variants  into variants
1222DEBUG: new fully merged portvariants:
1223DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/qscintilla
1224DEBUG: OS Platform: darwin
1225DEBUG: OS Version: 10.2.0
1226DEBUG: Mac OS X Version: 10.6
1227DEBUG: System Arch: i386
1228DEBUG: setting option os.universal_supported to yes
1229DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1230DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1231DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1232DEBUG: 'universal_variant no' specified, so not adding the default universal variant
1233DEBUG: Requested variant darwin is not provided by port qscintilla.
1234DEBUG: Requested variant i386 is not provided by port qscintilla.
1235DEBUG: Requested variant macosx is not provided by port qscintilla.
1236DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python25
1237DEBUG: epoch: in tree: 0 installed: 0
1238DEBUG: python25 2.5.4_9 exists in the ports tree
1239DEBUG: python25 2.5.4_9 +darwin+darwin_10+macosx is the latest installed
1240DEBUG: python25 2.5.4_9 +darwin+darwin_10+macosx is active
1241DEBUG: Merging existing variants darwin darwin_10 macosx into variants
1242DEBUG: new fully merged portvariants:
1243DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python25
1244DEBUG: OS Platform: darwin
1245DEBUG: OS Version: 10.2.0
1246DEBUG: Mac OS X Version: 10.6
1247DEBUG: System Arch: i386
1248DEBUG: setting option os.universal_supported to yes
1249DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1250DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1251DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1252DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
1253DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1254DEBUG: universal variant already exists, so not adding the default one
1255DEBUG: Requested variant i386 is not provided by port python25.
1256DEBUG: Executing variant macosx provides macosx
1257DEBUG: Executing variant darwin provides darwin
1258DEBUG: Executing variant darwin_10 provides darwin_10
1259DEBUG: No need to upgrade! python25 2.5.4_9 >= python25 2.5.4_9
1260DEBUG: No need to upgrade! qscintilla 2.4_0 >= qscintilla 2.4_0
1261DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-lint
1262DEBUG: epoch: in tree: 0 installed: 0
1263DEBUG: py26-lint 0.18.1_0 exists in the ports tree
1264DEBUG: py26-lint 0.18.1_0  is the latest installed
1265DEBUG: py26-lint 0.18.1_0  is active
1266DEBUG: Merging existing variants  into variants
1267DEBUG: new fully merged portvariants:
1268DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-lint
1269DEBUG: OS Platform: darwin
1270DEBUG: OS Version: 10.2.0
1271DEBUG: Mac OS X Version: 10.6
1272DEBUG: System Arch: i386
1273DEBUG: setting option os.universal_supported to yes
1274DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1275DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1276DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1277DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl
1278DEBUG: not using configure, so not adding the default universal variant
1279DEBUG: Requested variant darwin is not provided by port py26-lint.
1280DEBUG: Requested variant i386 is not provided by port py26-lint.
1281DEBUG: Requested variant macosx is not provided by port py26-lint.
1282DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-logilab-common
1283DEBUG: epoch: in tree: 0 installed: 0
1284DEBUG: py26-logilab-common 0.45.0_0 exists in the ports tree
1285DEBUG: py26-logilab-common 0.45.0_0  is the latest installed
1286DEBUG: py26-logilab-common 0.45.0_0  is active
1287DEBUG: Merging existing variants  into variants
1288DEBUG: new fully merged portvariants:
1289DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-logilab-common
1290DEBUG: OS Platform: darwin
1291DEBUG: OS Version: 10.2.0
1292DEBUG: Mac OS X Version: 10.6
1293DEBUG: System Arch: i386
1294DEBUG: setting option os.universal_supported to yes
1295DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1296DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1297DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1298DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl
1299DEBUG: not using configure, so not adding the default universal variant
1300DEBUG: Requested variant darwin is not provided by port py26-logilab-common.
1301DEBUG: Requested variant i386 is not provided by port py26-logilab-common.
1302DEBUG: Requested variant macosx is not provided by port py26-logilab-common.
1303DEBUG: No need to upgrade! py26-logilab-common 0.45.0_0 >= py26-logilab-common 0.45.0_0
1304DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-logilab-astng
1305DEBUG: epoch: in tree: 0 installed: 0
1306DEBUG: py26-logilab-astng 0.19.1_0 exists in the ports tree
1307DEBUG: py26-logilab-astng 0.19.1_0  is the latest installed
1308DEBUG: py26-logilab-astng 0.19.1_0  is active
1309DEBUG: Merging existing variants  into variants
1310DEBUG: new fully merged portvariants:
1311DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-logilab-astng
1312DEBUG: OS Platform: darwin
1313DEBUG: OS Version: 10.2.0
1314DEBUG: Mac OS X Version: 10.6
1315DEBUG: System Arch: i386
1316DEBUG: setting option os.universal_supported to yes
1317DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1318DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1319DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1320DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl
1321DEBUG: not using configure, so not adding the default universal variant
1322DEBUG: Requested variant darwin is not provided by port py26-logilab-astng.
1323DEBUG: Requested variant i386 is not provided by port py26-logilab-astng.
1324DEBUG: Requested variant macosx is not provided by port py26-logilab-astng.
1325DEBUG: No need to upgrade! py26-logilab-astng 0.19.1_0 >= py26-logilab-astng 0.19.1_0
1326DEBUG: No need to upgrade! py26-lint 0.18.1_0 >= py26-lint 0.18.1_0
1327DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-numpy
1328DEBUG: epoch: in tree: 0 installed: 0
1329DEBUG: py26-numpy 1.4.0_0 exists in the ports tree
1330DEBUG: py26-numpy 1.4.0_0  is the latest installed
1331DEBUG: py26-numpy 1.4.0_0  is active
1332DEBUG: Merging existing variants  into variants
1333DEBUG: new fully merged portvariants:
1334DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-numpy
1335DEBUG: OS Platform: darwin
1336DEBUG: OS Version: 10.2.0
1337DEBUG: Mac OS X Version: 10.6
1338DEBUG: System Arch: i386
1339DEBUG: setting option os.universal_supported to yes
1340DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1341DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1342DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1343DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl
1344DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1345DEBUG: universal variant already exists, so not adding the default one
1346DEBUG: Requested variant darwin is not provided by port py26-numpy.
1347DEBUG: Requested variant i386 is not provided by port py26-numpy.
1348DEBUG: Requested variant macosx is not provided by port py26-numpy.
1349DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/math/fftw-3
1350DEBUG: epoch: in tree: 0 installed: 0
1351DEBUG: fftw-3 3.2.2_0 exists in the ports tree
1352DEBUG: fftw-3 3.2.2_0 +i386 is the latest installed
1353DEBUG: fftw-3 3.2.2_0 +i386 is active
1354DEBUG: Merging existing variants i386 into variants
1355DEBUG: new fully merged portvariants:
1356DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/math/fftw-3
1357DEBUG: OS Platform: darwin
1358DEBUG: OS Version: 10.2.0
1359DEBUG: Mac OS X Version: 10.6
1360DEBUG: System Arch: i386
1361DEBUG: setting option os.universal_supported to yes
1362DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1363DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1364DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1365DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
1366DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1367DEBUG: universal variant already exists, so not adding the default one
1368DEBUG: Requested variant darwin is not provided by port fftw-3.
1369DEBUG: Requested variant macosx is not provided by port fftw-3.
1370DEBUG: Executing variant i386 provides i386
1371DEBUG: No need to upgrade! fftw-3 3.2.2_0 >= fftw-3 3.2.2_0
1372DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-nose
1373DEBUG: epoch: in tree: 0 installed: 0
1374DEBUG: py26-nose 0.11.1_0 exists in the ports tree
1375DEBUG: py26-nose 0.11.1_0  is the latest installed
1376DEBUG: py26-nose 0.11.1_0  is active
1377DEBUG: Merging existing variants  into variants
1378DEBUG: new fully merged portvariants:
1379DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-nose
1380DEBUG: OS Platform: darwin
1381DEBUG: OS Version: 10.2.0
1382DEBUG: Mac OS X Version: 10.6
1383DEBUG: System Arch: i386
1384DEBUG: setting option os.universal_supported to yes
1385DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1386DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1387DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1388DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl
1389DEBUG: not using configure, so not adding the default universal variant
1390DEBUG: Requested variant darwin is not provided by port py26-nose.
1391DEBUG: Requested variant i386 is not provided by port py26-nose.
1392DEBUG: Requested variant macosx is not provided by port py26-nose.
1393DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-setuptools
1394DEBUG: epoch: in tree: 0 installed: 0
1395DEBUG: py26-setuptools 0.6c11_0 exists in the ports tree
1396DEBUG: py26-setuptools 0.6c11_0  is the latest installed
1397DEBUG: py26-setuptools 0.6c11_0  is active
1398DEBUG: Merging existing variants  into variants
1399DEBUG: new fully merged portvariants:
1400DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-setuptools
1401DEBUG: OS Platform: darwin
1402DEBUG: OS Version: 10.2.0
1403DEBUG: Mac OS X Version: 10.6
1404DEBUG: System Arch: i386
1405DEBUG: setting option os.universal_supported to yes
1406DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1407DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1408DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1409DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl
1410DEBUG: not using configure, so not adding the default universal variant
1411DEBUG: Requested variant darwin is not provided by port py26-setuptools.
1412DEBUG: Requested variant i386 is not provided by port py26-setuptools.
1413DEBUG: Requested variant macosx is not provided by port py26-setuptools.
1414DEBUG: No need to upgrade! py26-setuptools 0.6c11_0 >= py26-setuptools 0.6c11_0
1415DEBUG: No need to upgrade! py26-nose 0.11.1_0 >= py26-nose 0.11.1_0
1416DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/math/atlas
1417DEBUG: epoch: in tree: 0 installed: 0
1418DEBUG: atlas 3.8.3_1 exists in the ports tree
1419DEBUG: atlas 3.8.3_1  is the latest installed
1420DEBUG: atlas 3.8.3_1  is active
1421DEBUG: Merging existing variants  into variants
1422DEBUG: new fully merged portvariants:
1423DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/math/atlas
1424DEBUG: OS Platform: darwin
1425DEBUG: OS Version: 10.2.0
1426DEBUG: Mac OS X Version: 10.6
1427DEBUG: System Arch: i386
1428DEBUG: setting option os.universal_supported to yes
1429DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1430DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1431DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1432DEBUG: 'universal_variant no' specified, so not adding the default universal variant
1433DEBUG: Requested variant darwin is not provided by port atlas.
1434DEBUG: Requested variant i386 is not provided by port atlas.
1435DEBUG: Requested variant macosx is not provided by port atlas.
1436DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/gcc43
1437DEBUG: epoch: in tree: 0 installed: 0
1438DEBUG: gcc43 4.3.4_0 exists in the ports tree
1439DEBUG: gcc43 4.3.4_0  is the latest installed
1440DEBUG: gcc43 4.3.4_0  is active
1441DEBUG: Merging existing variants  into variants
1442DEBUG: new fully merged portvariants:
1443DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/gcc43
1444DEBUG: OS Platform: darwin
1445DEBUG: OS Version: 10.2.0
1446DEBUG: Mac OS X Version: 10.6
1447DEBUG: System Arch: i386
1448DEBUG: setting option os.universal_supported to yes
1449DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1450DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1451DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1452DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1453DEBUG: 'universal_variant no' specified, so not adding the default universal variant
1454DEBUG: Requested variant darwin is not provided by port gcc43.
1455DEBUG: Requested variant i386 is not provided by port gcc43.
1456DEBUG: Requested variant macosx is not provided by port gcc43.
1457DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmp
1458DEBUG: epoch: in tree: 0 installed: 0
1459DEBUG: gmp 4.3.2_0 exists in the ports tree
1460DEBUG: gmp 4.3.2_0  is the latest installed
1461DEBUG: gmp 4.3.2_0  is active
1462DEBUG: Merging existing variants  into variants
1463DEBUG: new fully merged portvariants:
1464DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmp
1465DEBUG: OS Platform: darwin
1466DEBUG: OS Version: 10.2.0
1467DEBUG: Mac OS X Version: 10.6
1468DEBUG: System Arch: i386
1469DEBUG: setting option os.universal_supported to yes
1470DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1471DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1472DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1473DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
1474DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1475DEBUG: universal variant already exists, so not adding the default one
1476DEBUG: Requested variant darwin is not provided by port gmp.
1477DEBUG: Requested variant i386 is not provided by port gmp.
1478DEBUG: Requested variant macosx is not provided by port gmp.
1479DEBUG: No need to upgrade! gmp 4.3.2_0 >= gmp 4.3.2_0
1480DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/mpfr
1481DEBUG: epoch: in tree: 0 installed: 0
1482DEBUG: mpfr 2.4.2-p1_0 exists in the ports tree
1483DEBUG: mpfr 2.4.2-p1_0  is the latest installed
1484DEBUG: mpfr 2.4.2-p1_0  is active
1485DEBUG: Merging existing variants  into variants
1486DEBUG: new fully merged portvariants:
1487DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/mpfr
1488DEBUG: OS Platform: darwin
1489DEBUG: OS Version: 10.2.0
1490DEBUG: Mac OS X Version: 10.6
1491DEBUG: System Arch: i386
1492DEBUG: setting option os.universal_supported to yes
1493DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1494DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1495DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1496DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
1497DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1498DEBUG: universal variant already exists, so not adding the default one
1499DEBUG: Requested variant darwin is not provided by port mpfr.
1500DEBUG: Requested variant i386 is not provided by port mpfr.
1501DEBUG: Requested variant macosx is not provided by port mpfr.
1502DEBUG: No need to upgrade! mpfr 2.4.2-p1_0 >= mpfr 2.4.2-p1_0
1503DEBUG: No need to upgrade! gcc43 4.3.4_0 >= gcc43 4.3.4_0
1504DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/gzip
1505DEBUG: epoch: in tree: 0 installed: 0
1506DEBUG: gzip 1.4_0 exists in the ports tree
1507DEBUG: gzip 1.4_0  is the latest installed
1508DEBUG: gzip 1.4_0  is active
1509DEBUG: Merging existing variants  into variants
1510DEBUG: new fully merged portvariants:
1511DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/gzip
1512DEBUG: OS Platform: darwin
1513DEBUG: OS Version: 10.2.0
1514DEBUG: Mac OS X Version: 10.6
1515DEBUG: System Arch: i386
1516DEBUG: setting option os.universal_supported to yes
1517DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1518DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1519DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1520DEBUG: adding the default universal variant
1521DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1522DEBUG: Requested variant darwin is not provided by port gzip.
1523DEBUG: Requested variant i386 is not provided by port gzip.
1524DEBUG: Requested variant macosx is not provided by port gzip.
1525DEBUG: No need to upgrade! gzip 1.4_0 >= gzip 1.4_0
1526DEBUG: No need to upgrade! atlas 3.8.3_1 >= atlas 3.8.3_1
1527DEBUG: No need to upgrade! py26-numpy 1.4.0_0 >= py26-numpy 1.4.0_0
1528DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-scipy
1529DEBUG: epoch: in tree: 0 installed: 0
1530DEBUG: py26-scipy 0.7.1_0 exists in the ports tree
1531DEBUG: py26-scipy 0.7.1_0 +gcc43 is the latest installed
1532DEBUG: py26-scipy 0.7.1_0 +gcc43 is active
1533DEBUG: Merging existing variants gcc43 into variants
1534DEBUG: new fully merged portvariants: gcc43 +
1535DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-scipy
1536DEBUG: OS Platform: darwin
1537DEBUG: OS Version: 10.2.0
1538DEBUG: Mac OS X Version: 10.6
1539DEBUG: System Arch: i386
1540DEBUG: setting option os.universal_supported to yes
1541DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1542DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1543DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1544DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl
1545DEBUG: not using configure, so not adding the default universal variant
1546DEBUG: Requested variant darwin is not provided by port py26-scipy.
1547DEBUG: Requested variant i386 is not provided by port py26-scipy.
1548DEBUG: Requested variant macosx is not provided by port py26-scipy.
1549DEBUG: Executing variant gcc43 provides gcc43
1550DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/math/SuiteSparse
1551DEBUG: epoch: in tree: 0 installed: 0
1552DEBUG: SuiteSparse 3.4.0_0 exists in the ports tree
1553DEBUG: SuiteSparse 3.4.0_0  is the latest installed
1554DEBUG: SuiteSparse 3.4.0_0  is active
1555DEBUG: Merging existing variants  into variants
1556DEBUG: new fully merged portvariants:
1557DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/math/SuiteSparse
1558DEBUG: OS Platform: darwin
1559DEBUG: OS Version: 10.2.0
1560DEBUG: Mac OS X Version: 10.6
1561DEBUG: System Arch: i386
1562DEBUG: setting option os.universal_supported to yes
1563DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1564DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1565DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1566DEBUG: not using configure, so not adding the default universal variant
1567DEBUG: Requested variant darwin is not provided by port SuiteSparse.
1568DEBUG: Requested variant i386 is not provided by port SuiteSparse.
1569DEBUG: Requested variant macosx is not provided by port SuiteSparse.
1570DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/math/metis
1571DEBUG: epoch: in tree: 0 installed: 0
1572DEBUG: metis 4.0.1_0 exists in the ports tree
1573DEBUG: metis 4.0.1_0  is the latest installed
1574DEBUG: metis 4.0.1_0  is active
1575DEBUG: Merging existing variants  into variants
1576DEBUG: new fully merged portvariants:
1577DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/math/metis
1578DEBUG: OS Platform: darwin
1579DEBUG: OS Version: 10.2.0
1580DEBUG: Mac OS X Version: 10.6
1581DEBUG: System Arch: i386
1582DEBUG: setting option os.universal_supported to yes
1583DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1584DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1585DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1586DEBUG: adding the default universal variant
1587DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1588DEBUG: Requested variant darwin is not provided by port metis.
1589DEBUG: Requested variant i386 is not provided by port metis.
1590DEBUG: Requested variant macosx is not provided by port metis.
1591DEBUG: No need to upgrade! metis 4.0.1_0 >= metis 4.0.1_0
1592DEBUG: No need to upgrade! SuiteSparse 3.4.0_0 >= SuiteSparse 3.4.0_0
1593DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/swig-python
1594DEBUG: epoch: in tree: 0 installed: 0
1595DEBUG: swig-python 1.3.40_0 exists in the ports tree
1596DEBUG: swig-python 1.3.40_0  is the latest installed
1597DEBUG: swig-python 1.3.40_0  is active
1598DEBUG: Merging existing variants  into variants
1599DEBUG: new fully merged portvariants:
1600DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/swig-python
1601DEBUG: OS Platform: darwin
1602DEBUG: OS Version: 10.2.0
1603DEBUG: Mac OS X Version: 10.6
1604DEBUG: System Arch: i386
1605DEBUG: setting option os.universal_supported to yes
1606DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1607DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1608DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1609DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/swigbinding-1.0.tcl
1610DEBUG: Re-registering default for distname
1611DEBUG: adding the default universal variant
1612DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1613DEBUG: Requested variant darwin is not provided by port swig-python.
1614DEBUG: Requested variant i386 is not provided by port swig-python.
1615DEBUG: Requested variant macosx is not provided by port swig-python.
1616DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/bison
1617DEBUG: epoch: in tree: 0 installed: 0
1618DEBUG: bison 2.4.1_0 exists in the ports tree
1619DEBUG: bison 2.4.1_0  is the latest installed
1620DEBUG: bison 2.4.1_0  is active
1621DEBUG: Merging existing variants  into variants
1622DEBUG: new fully merged portvariants:
1623DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/bison
1624DEBUG: OS Platform: darwin
1625DEBUG: OS Version: 10.2.0
1626DEBUG: Mac OS X Version: 10.6
1627DEBUG: System Arch: i386
1628DEBUG: setting option os.universal_supported to yes
1629DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1630DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1631DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1632DEBUG: adding the default universal variant
1633DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1634DEBUG: Requested variant darwin is not provided by port bison.
1635DEBUG: Requested variant i386 is not provided by port bison.
1636DEBUG: Requested variant macosx is not provided by port bison.
1637DEBUG: No need to upgrade! bison 2.4.1_0 >= bison 2.4.1_0
1638DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/gsed
1639DEBUG: epoch: in tree: 0 installed: 0
1640DEBUG: gsed 4.2.1_0 exists in the ports tree
1641DEBUG: gsed 4.2.1_0  is the latest installed
1642DEBUG: gsed 4.2.1_0  is active
1643DEBUG: Merging existing variants  into variants
1644DEBUG: new fully merged portvariants:
1645DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/gsed
1646DEBUG: OS Platform: darwin
1647DEBUG: OS Version: 10.2.0
1648DEBUG: Mac OS X Version: 10.6
1649DEBUG: System Arch: i386
1650DEBUG: setting option os.universal_supported to yes
1651DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1652DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1653DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1654DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
1655DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1656DEBUG: universal variant already exists, so not adding the default one
1657DEBUG: Requested variant darwin is not provided by port gsed.
1658DEBUG: Requested variant i386 is not provided by port gsed.
1659DEBUG: Requested variant macosx is not provided by port gsed.
1660DEBUG: No need to upgrade! gsed 4.2.1_0 >= gsed 4.2.1_0
1661DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/swig
1662DEBUG: epoch: in tree: 0 installed: 0
1663DEBUG: swig 1.3.40_1 exists in the ports tree
1664DEBUG: swig 1.3.40_1  is the latest installed
1665DEBUG: swig 1.3.40_1  is active
1666DEBUG: Merging existing variants  into variants
1667DEBUG: new fully merged portvariants:
1668DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/swig
1669DEBUG: OS Platform: darwin
1670DEBUG: OS Version: 10.2.0
1671DEBUG: Mac OS X Version: 10.6
1672DEBUG: System Arch: i386
1673DEBUG: setting option os.universal_supported to yes
1674DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1675DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1676DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1677DEBUG: adding the default universal variant
1678DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1679DEBUG: Requested variant darwin is not provided by port swig.
1680DEBUG: Requested variant i386 is not provided by port swig.
1681DEBUG: Requested variant macosx is not provided by port swig.
1682DEBUG: No need to upgrade! swig 1.3.40_1 >= swig 1.3.40_1
1683DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/python_select
1684DEBUG: epoch: in tree: 0 installed: 0
1685DEBUG: python_select 0.3_0 exists in the ports tree
1686DEBUG: python_select 0.3_0 +darwin_10 is the latest installed
1687DEBUG: python_select 0.3_0 +darwin_10 is active
1688DEBUG: Merging existing variants darwin_10 into variants
1689DEBUG: new fully merged portvariants:
1690DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/python_select
1691DEBUG: OS Platform: darwin
1692DEBUG: OS Version: 10.2.0
1693DEBUG: Mac OS X Version: 10.6
1694DEBUG: System Arch: i386
1695DEBUG: setting option os.universal_supported to yes
1696DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1697DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1698DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1699DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
1700DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1701DEBUG: adding the default universal variant
1702DEBUG: Requested variant darwin is not provided by port python_select.
1703DEBUG: Requested variant i386 is not provided by port python_select.
1704DEBUG: Requested variant macosx is not provided by port python_select.
1705DEBUG: Executing variant darwin_10 provides darwin_10
1706DEBUG: No need to upgrade! python_select 0.3_0 >= python_select 0.3_0
1707DEBUG: No need to upgrade! swig-python 1.3.40_0 >= swig-python 1.3.40_0
1708DEBUG: No need to upgrade! py26-scipy 0.7.1_0 >= py26-scipy 0.7.1_0
1709DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-matplotlib
1710DEBUG: epoch: in tree: 0 installed: 0
1711DEBUG: py26-matplotlib 0.99.1.2_0 exists in the ports tree
1712DEBUG: py26-matplotlib 0.99.1.2_0 +tkinter is the latest installed
1713DEBUG: py26-matplotlib 0.99.1.2_0 +tkinter is active
1714DEBUG: Merging existing variants tkinter into variants
1715DEBUG: new fully merged portvariants: tkinter +
1716DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-matplotlib
1717DEBUG: OS Platform: darwin
1718DEBUG: OS Version: 10.2.0
1719DEBUG: Mac OS X Version: 10.6
1720DEBUG: System Arch: i386
1721DEBUG: setting option os.universal_supported to yes
1722DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1723DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1724DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1725DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl
1726DEBUG: not using configure, so not adding the default universal variant
1727DEBUG: Requested variant darwin is not provided by port py26-matplotlib.
1728DEBUG: Requested variant i386 is not provided by port py26-matplotlib.
1729DEBUG: Requested variant macosx is not provided by port py26-matplotlib.
1730DEBUG: Executing variant tkinter provides tkinter
1731DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-dateutil
1732DEBUG: epoch: in tree: 0 installed: 0
1733DEBUG: py26-dateutil 1.4.1_0 exists in the ports tree
1734DEBUG: py26-dateutil 1.4.1_0  is the latest installed
1735DEBUG: py26-dateutil 1.4.1_0  is active
1736DEBUG: Merging existing variants  into variants
1737DEBUG: new fully merged portvariants:
1738DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-dateutil
1739DEBUG: OS Platform: darwin
1740DEBUG: OS Version: 10.2.0
1741DEBUG: Mac OS X Version: 10.6
1742DEBUG: System Arch: i386
1743DEBUG: setting option os.universal_supported to yes
1744DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1745DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1746DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1747DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl
1748DEBUG: 'universal_variant no' specified, so not adding the default universal variant
1749DEBUG: Requested variant darwin is not provided by port py26-dateutil.
1750DEBUG: Requested variant i386 is not provided by port py26-dateutil.
1751DEBUG: Requested variant macosx is not provided by port py26-dateutil.
1752DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-tz
1753DEBUG: epoch: in tree: 0 installed: 0
1754DEBUG: py26-tz 2010b_0 exists in the ports tree
1755DEBUG: py26-tz 2010b_0  is the latest installed
1756DEBUG: py26-tz 2010b_0  is active
1757DEBUG: Merging existing variants  into variants
1758DEBUG: new fully merged portvariants:
1759DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-tz
1760DEBUG: OS Platform: darwin
1761DEBUG: OS Version: 10.2.0
1762DEBUG: Mac OS X Version: 10.6
1763DEBUG: System Arch: i386
1764DEBUG: setting option os.universal_supported to yes
1765DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1766DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1767DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1768DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl
1769DEBUG: not using configure, so not adding the default universal variant
1770DEBUG: Requested variant darwin is not provided by port py26-tz.
1771DEBUG: Requested variant i386 is not provided by port py26-tz.
1772DEBUG: Requested variant macosx is not provided by port py26-tz.
1773DEBUG: No need to upgrade! py26-tz 2010b_0 >= py26-tz 2010b_0
1774DEBUG: No need to upgrade! py26-dateutil 1.4.1_0 >= py26-dateutil 1.4.1_0
1775DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-configobj
1776DEBUG: epoch: in tree: 0 installed: 0
1777DEBUG: py26-configobj 4.5.2_0 exists in the ports tree
1778DEBUG: py26-configobj 4.5.2_0  is the latest installed
1779DEBUG: py26-configobj 4.5.2_0  is active
1780DEBUG: Merging existing variants  into variants
1781DEBUG: new fully merged portvariants:
1782DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-configobj
1783DEBUG: OS Platform: darwin
1784DEBUG: OS Version: 10.2.0
1785DEBUG: Mac OS X Version: 10.6
1786DEBUG: System Arch: i386
1787DEBUG: setting option os.universal_supported to yes
1788DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1789DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1790DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1791DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl
1792DEBUG: not using configure, so not adding the default universal variant
1793DEBUG: Requested variant darwin is not provided by port py26-configobj.
1794DEBUG: Requested variant i386 is not provided by port py26-configobj.
1795DEBUG: Requested variant macosx is not provided by port py26-configobj.
1796DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/unzip
1797DEBUG: unzip is *not* installed by MacPorts
1798DEBUG: Searching for dependency: unzip
1799DEBUG: Didn't find receipt, going to depspec regex for: unzip
1800DEBUG: Found Dependency: path: /usr/bin filename: unzip regex: ^unzip$
1801DEBUG: unzip not installed, soft dependency satisfied
1802DEBUG: No need to upgrade! py26-configobj 4.5.2_0 >= py26-configobj 4.5.2_0
1803DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-pyobjc-cocoa
1804DEBUG: epoch: in tree: 0 installed: 0
1805DEBUG: py26-pyobjc-cocoa 2.2_0 exists in the ports tree
1806DEBUG: py26-pyobjc-cocoa 2.2_0  is the latest installed
1807DEBUG: py26-pyobjc-cocoa 2.2_0  is active
1808DEBUG: Merging existing variants  into variants
1809DEBUG: new fully merged portvariants:
1810DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-pyobjc-cocoa
1811DEBUG: OS Platform: darwin
1812DEBUG: OS Version: 10.2.0
1813DEBUG: Mac OS X Version: 10.6
1814DEBUG: System Arch: i386
1815DEBUG: setting option os.universal_supported to yes
1816DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1817DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1818DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1819DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl
1820DEBUG: not using configure, so not adding the default universal variant
1821DEBUG: Requested variant darwin is not provided by port py26-pyobjc-cocoa.
1822DEBUG: Requested variant i386 is not provided by port py26-pyobjc-cocoa.
1823DEBUG: Requested variant macosx is not provided by port py26-pyobjc-cocoa.
1824DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-pyobjc2-cocoa
1825DEBUG: epoch: in tree: 0 installed: 0
1826DEBUG: py26-pyobjc2-cocoa 2.0_2 exists in the ports tree
1827DEBUG: py26-pyobjc2-cocoa 2.0_2  is the latest installed
1828DEBUG: py26-pyobjc2-cocoa 2.0_2  is active
1829DEBUG: Merging existing variants  into variants
1830DEBUG: new fully merged portvariants:
1831DEBUG: py26-pyobjc2-cocoa is replaced by py26-pyobjc-cocoa
1832DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-pyobjc-cocoa
1833DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-pyobjc
1834DEBUG: epoch: in tree: 0 installed: 0
1835DEBUG: py26-pyobjc 2.2_0 exists in the ports tree
1836DEBUG: py26-pyobjc 2.2_0  is the latest installed
1837DEBUG: py26-pyobjc 2.2_0  is active
1838DEBUG: Merging existing variants  into variants
1839DEBUG: new fully merged portvariants:
1840DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-pyobjc
1841DEBUG: OS Platform: darwin
1842DEBUG: OS Version: 10.2.0
1843DEBUG: Mac OS X Version: 10.6
1844DEBUG: System Arch: i386
1845DEBUG: setting option os.universal_supported to yes
1846DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1847DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1848DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1849DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl
1850DEBUG: not using configure, so not adding the default universal variant
1851DEBUG: Requested variant darwin is not provided by port py26-pyobjc.
1852DEBUG: Requested variant i386 is not provided by port py26-pyobjc.
1853DEBUG: Requested variant macosx is not provided by port py26-pyobjc.
1854DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-pyobjc2
1855DEBUG: epoch: in tree: 0 installed: 0
1856DEBUG: py26-pyobjc2 2.0_2 exists in the ports tree
1857DEBUG: py26-pyobjc2 2.0_2  is the latest installed
1858DEBUG: py26-pyobjc2 2.0_2  is active
1859DEBUG: Merging existing variants  into variants
1860DEBUG: new fully merged portvariants:
1861DEBUG: py26-pyobjc2 is replaced by py26-pyobjc
1862DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-pyobjc
1863DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-py2app
1864DEBUG: epoch: in tree: 0 installed: 0
1865DEBUG: py26-py2app 0.4.3_0 exists in the ports tree
1866DEBUG: py26-py2app 0.4.3_0  is the latest installed
1867DEBUG: py26-py2app 0.4.3_0  is active
1868DEBUG: Merging existing variants  into variants
1869DEBUG: new fully merged portvariants:
1870DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-py2app
1871DEBUG: OS Platform: darwin
1872DEBUG: OS Version: 10.2.0
1873DEBUG: Mac OS X Version: 10.6
1874DEBUG: System Arch: i386
1875DEBUG: setting option os.universal_supported to yes
1876DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1877DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1878DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1879DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl
1880DEBUG: not using configure, so not adding the default universal variant
1881DEBUG: Requested variant darwin is not provided by port py26-py2app.
1882DEBUG: Requested variant i386 is not provided by port py26-py2app.
1883DEBUG: Requested variant macosx is not provided by port py26-py2app.
1884DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-altgraph
1885DEBUG: epoch: in tree: 0 installed: 0
1886DEBUG: py26-altgraph 0.6.7_0 exists in the ports tree
1887DEBUG: py26-altgraph 0.6.7_0  is the latest installed
1888DEBUG: py26-altgraph 0.6.7_0  is active
1889DEBUG: Merging existing variants  into variants
1890DEBUG: new fully merged portvariants:
1891DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-altgraph
1892DEBUG: OS Platform: darwin
1893DEBUG: OS Version: 10.2.0
1894DEBUG: Mac OS X Version: 10.6
1895DEBUG: System Arch: i386
1896DEBUG: setting option os.universal_supported to yes
1897DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1898DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1899DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1900DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl
1901DEBUG: not using configure, so not adding the default universal variant
1902DEBUG: Requested variant darwin is not provided by port py26-altgraph.
1903DEBUG: Requested variant i386 is not provided by port py26-altgraph.
1904DEBUG: Requested variant macosx is not provided by port py26-altgraph.
1905DEBUG: No need to upgrade! py26-altgraph 0.6.7_0 >= py26-altgraph 0.6.7_0
1906DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-macholib
1907DEBUG: epoch: in tree: 0 installed: 0
1908DEBUG: py26-macholib 1.2.1_3 exists in the ports tree
1909DEBUG: py26-macholib 1.2.1_3  is the latest installed
1910DEBUG: py26-macholib 1.2.1_3  is active
1911DEBUG: Merging existing variants  into variants
1912DEBUG: new fully merged portvariants:
1913DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-macholib
1914DEBUG: OS Platform: darwin
1915DEBUG: OS Version: 10.2.0
1916DEBUG: Mac OS X Version: 10.6
1917DEBUG: System Arch: i386
1918DEBUG: setting option os.universal_supported to yes
1919DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1920DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1921DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1922DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl
1923DEBUG: not using configure, so not adding the default universal variant
1924DEBUG: Requested variant darwin is not provided by port py26-macholib.
1925DEBUG: Requested variant i386 is not provided by port py26-macholib.
1926DEBUG: Requested variant macosx is not provided by port py26-macholib.
1927DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-modulegraph
1928DEBUG: epoch: in tree: 0 installed: 0
1929DEBUG: py26-modulegraph 0.7.3_0 exists in the ports tree
1930DEBUG: py26-modulegraph 0.7.3_0  is the latest installed
1931DEBUG: py26-modulegraph 0.7.3_0  is active
1932DEBUG: Merging existing variants  into variants
1933DEBUG: new fully merged portvariants:
1934DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-modulegraph
1935DEBUG: OS Platform: darwin
1936DEBUG: OS Version: 10.2.0
1937DEBUG: Mac OS X Version: 10.6
1938DEBUG: System Arch: i386
1939DEBUG: setting option os.universal_supported to yes
1940DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1941DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1942DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1943DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl
1944DEBUG: not using configure, so not adding the default universal variant
1945DEBUG: Requested variant darwin is not provided by port py26-modulegraph.
1946DEBUG: Requested variant i386 is not provided by port py26-modulegraph.
1947DEBUG: Requested variant macosx is not provided by port py26-modulegraph.
1948DEBUG: No need to upgrade! py26-modulegraph 0.7.3_0 >= py26-modulegraph 0.7.3_0
1949DEBUG: No need to upgrade! py26-macholib 1.2.1_3 >= py26-macholib 1.2.1_3
1950DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-bdist_mpkg
1951DEBUG: epoch: in tree: 0 installed: 0
1952DEBUG: py26-bdist_mpkg 0.4.4_0 exists in the ports tree
1953DEBUG: py26-bdist_mpkg 0.4.4_0  is the latest installed
1954DEBUG: py26-bdist_mpkg 0.4.4_0  is active
1955DEBUG: Merging existing variants  into variants
1956DEBUG: new fully merged portvariants:
1957DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-bdist_mpkg
1958DEBUG: OS Platform: darwin
1959DEBUG: OS Version: 10.2.0
1960DEBUG: Mac OS X Version: 10.6
1961DEBUG: System Arch: i386
1962DEBUG: setting option os.universal_supported to yes
1963DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1964DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1965DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1966DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl
1967DEBUG: not using configure, so not adding the default universal variant
1968DEBUG: Requested variant darwin is not provided by port py26-bdist_mpkg.
1969DEBUG: Requested variant i386 is not provided by port py26-bdist_mpkg.
1970DEBUG: Requested variant macosx is not provided by port py26-bdist_mpkg.
1971DEBUG: No need to upgrade! py26-bdist_mpkg 0.4.4_0 >= py26-bdist_mpkg 0.4.4_0
1972DEBUG: No need to upgrade! py26-py2app 0.4.3_0 >= py26-py2app 0.4.3_0
1973--->  Deactivating py26-pyobjc2 @2.0_2
1974DEBUG: deactivating file: /opt/local/share/doc/py26-pyobjc2/readme.txt
1975DEBUG: deactivating directory: /opt/local/share/doc/py26-pyobjc2
1976DEBUG: /opt/local/share/doc is not empty
1977DEBUG: /opt/local/share is not empty
1978DEBUG: /opt/local is not empty
1979DEBUG: /opt is not empty
1980DEBUG: / is not empty
1981DEBUG: Removing entry from file_map: /opt/local/share/doc/py26-pyobjc2/readme.txt
1982DEBUG: Attempting ln -sf /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-pyobjc/work /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-pyobjc/work
1983--->  Computing dependencies for py26-pyobjc
1984DEBUG: Searching for dependency: py26-setuptools
1985DEBUG: Found Dependency: receipt exists for py26-setuptools
1986DEBUG: Searching for dependency: py26-py2app
1987DEBUG: Found Dependency: receipt exists for py26-py2app
1988DEBUG: Searching for dependency: py26-pyobjc2
1989DEBUG: Didn't find receipt, going to depspec regex for: py26-pyobjc2
1990DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-pyobjc2
1991DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-pyobjc2
1992DEBUG: OS Platform: darwin
1993DEBUG: OS Version: 10.2.0
1994DEBUG: Mac OS X Version: 10.6
1995DEBUG: System Arch: i386
1996DEBUG: setting option os.universal_supported to yes
1997DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1998DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1999DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
2000DEBUG: not using configure, so not adding the default universal variant
2001DEBUG: Requested variant darwin is not provided by port py26-pyobjc2.
2002DEBUG: Requested variant i386 is not provided by port py26-pyobjc2.
2003DEBUG: Requested variant macosx is not provided by port py26-pyobjc2.
2004DEBUG: Attempting ln -sf /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-pyobjc2/work /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-pyobjc2/work
2005--->  Activating py26-pyobjc2 @2.0_2
2006DEBUG: activating directory: /
2007DEBUG: activating directory: /opt
2008DEBUG: activating directory: /opt/local
2009DEBUG: activating directory: /opt/local/share
2010DEBUG: activating directory: /opt/local/share/doc
2011DEBUG: activating directory: /opt/local/share/doc/py26-pyobjc2
2012DEBUG: activating file: /opt/local/share/doc/py26-pyobjc2/readme.txt
2013DEBUG: Adding file to file_map: /opt/local/share/doc/py26-pyobjc2/readme.txt for: py26-pyobjc2
2014DEBUG: Executing org.macports.main (py26-pyobjc2)
2015--->  Cleaning py26-pyobjc2
2016DEBUG: Executing org.macports.clean (py26-pyobjc2)
2017--->  Removing build directory for py26-pyobjc2
2018DEBUG: Removing directory: /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-pyobjc2
2019DEBUG: delete: /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-pyobjc2
2020DEBUG: Removing symlink: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-pyobjc2/work
2021DEBUG: delete: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-pyobjc2/work
2022DEBUG: Skipping activate (py26-pyobjc @2.2_0) since this port is already active
2023DEBUG: Executing org.macports.main (py26-pyobjc)
2024--->  Cleaning py26-pyobjc
2025DEBUG: Executing org.macports.clean (py26-pyobjc)
2026--->  Removing build directory for py26-pyobjc
2027DEBUG: Removing directory: /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-pyobjc
2028DEBUG: delete: /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-pyobjc
2029DEBUG: Removing symlink: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-pyobjc/work
2030DEBUG: delete: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-pyobjc/work
2031DEBUG: No need to upgrade! py26-pyobjc 2.2_0 >= py26-pyobjc 2.2_0
2032--->  Deactivating py26-pyobjc2-cocoa @2.0_2
2033DEBUG: deactivating file: /opt/local/share/doc/py26-pyobjc2-cocoa/readme.txt
2034DEBUG: deactivating directory: /opt/local/share/doc/py26-pyobjc2-cocoa
2035DEBUG: /opt/local/share/doc is not empty
2036DEBUG: /opt/local/share is not empty
2037DEBUG: /opt/local is not empty
2038DEBUG: /opt is not empty
2039DEBUG: / is not empty
2040DEBUG: Removing entry from file_map: /opt/local/share/doc/py26-pyobjc2-cocoa/readme.txt
2041DEBUG: Attempting ln -sf /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-pyobjc-cocoa/work /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-pyobjc-cocoa/work
2042--->  Computing dependencies for py26-pyobjc-cocoa
2043DEBUG: Searching for dependency: py26-pyobjc
2044DEBUG: Found Dependency: receipt exists for py26-pyobjc
2045DEBUG: Searching for dependency: py26-pyobjc2-cocoa
2046DEBUG: Didn't find receipt, going to depspec regex for: py26-pyobjc2-cocoa
2047DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-pyobjc2-cocoa
2048DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-pyobjc2-cocoa
2049DEBUG: OS Platform: darwin
2050DEBUG: OS Version: 10.2.0
2051DEBUG: Mac OS X Version: 10.6
2052DEBUG: System Arch: i386
2053DEBUG: setting option os.universal_supported to yes
2054DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
2055DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
2056DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
2057DEBUG: not using configure, so not adding the default universal variant
2058DEBUG: Requested variant darwin is not provided by port py26-pyobjc2-cocoa.
2059DEBUG: Requested variant i386 is not provided by port py26-pyobjc2-cocoa.
2060DEBUG: Requested variant macosx is not provided by port py26-pyobjc2-cocoa.
2061DEBUG: Attempting ln -sf /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-pyobjc2-cocoa/work /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-pyobjc2-cocoa/work
2062--->  Activating py26-pyobjc2-cocoa @2.0_2
2063DEBUG: activating directory: /
2064DEBUG: activating directory: /opt
2065DEBUG: activating directory: /opt/local
2066DEBUG: activating directory: /opt/local/share
2067DEBUG: activating directory: /opt/local/share/doc
2068DEBUG: activating directory: /opt/local/share/doc/py26-pyobjc2-cocoa
2069DEBUG: activating file: /opt/local/share/doc/py26-pyobjc2-cocoa/readme.txt
2070DEBUG: Adding file to file_map: /opt/local/share/doc/py26-pyobjc2-cocoa/readme.txt for: py26-pyobjc2-cocoa
2071DEBUG: Executing org.macports.main (py26-pyobjc2-cocoa)
2072--->  Cleaning py26-pyobjc2-cocoa
2073DEBUG: Executing org.macports.clean (py26-pyobjc2-cocoa)
2074--->  Removing build directory for py26-pyobjc2-cocoa
2075DEBUG: Removing directory: /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-pyobjc2-cocoa
2076DEBUG: delete: /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-pyobjc2-cocoa
2077DEBUG: Removing symlink: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-pyobjc2-cocoa/work
2078DEBUG: delete: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-pyobjc2-cocoa/work
2079DEBUG: Skipping activate (py26-pyobjc-cocoa @2.2_0) since this port is already active
2080DEBUG: Executing org.macports.main (py26-pyobjc-cocoa)
2081--->  Cleaning py26-pyobjc-cocoa
2082DEBUG: Executing org.macports.clean (py26-pyobjc-cocoa)
2083--->  Removing build directory for py26-pyobjc-cocoa
2084DEBUG: Removing directory: /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-pyobjc-cocoa
2085DEBUG: delete: /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-pyobjc-cocoa
2086DEBUG: Removing symlink: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-pyobjc-cocoa/work
2087DEBUG: delete: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-pyobjc-cocoa/work
2088DEBUG: No need to upgrade! py26-pyobjc-cocoa 2.2_0 >= py26-pyobjc-cocoa 2.2_0
2089DEBUG: No need to upgrade! py26-matplotlib 0.99.1.2_0 >= py26-matplotlib 0.99.1.2_0
2090--->  Computing dependencies for py26-spyder
2091DEBUG: Searching for dependency: python26
2092DEBUG: Found Dependency: receipt exists for python26
2093DEBUG: Searching for dependency: py26-pyqt4
2094DEBUG: Found Dependency: receipt exists for py26-pyqt4
2095DEBUG: Searching for dependency: qscintilla
2096DEBUG: Found Dependency: receipt exists for qscintilla
2097DEBUG: Searching for dependency: py26-lint
2098DEBUG: Found Dependency: receipt exists for py26-lint
2099DEBUG: Searching for dependency: py26-numpy
2100DEBUG: Found Dependency: receipt exists for py26-numpy
2101DEBUG: Searching for dependency: py26-scipy
2102DEBUG: Found Dependency: receipt exists for py26-scipy
2103DEBUG: Searching for dependency: py26-matplotlib
2104DEBUG: Found Dependency: receipt exists for py26-matplotlib
2105DEBUG: Executing org.macports.main (py26-spyder)
2106DEBUG: Skipping completed org.macports.fetch (py26-spyder)
2107DEBUG: Skipping completed org.macports.checksum (py26-spyder)
2108DEBUG: Skipping completed org.macports.extract (py26-spyder)
2109DEBUG: Skipping completed org.macports.patch (py26-spyder)
2110DEBUG: Skipping completed org.macports.configure (py26-spyder)
2111--->  Building py26-spyder
2112DEBUG: Executing org.macports.build (py26-spyder)
2113DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.6'
2114DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-spyder/work/spyder-1.0.3" && /opt/local/Library/Frameworks/Python.framework/Versions/2.6/bin/python2.6 setup.py --no-user-cfg build'
2115Traceback (most recent call last):
2116  File "setup.py", line 29, in <module>
2117    from spyderlib import __version__ as version
2118  File "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-spyder/work/spyder-1.0.3/spyderlib/__init__.py", line 74, in <module>
2119    check_pyqt_qscintilla()
2120  File "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-spyder/work/spyder-1.0.3/spyderlib/__init__.py", line 69, in check_pyqt_qscintilla
2121    tkMessageBox.showerror("Spyder", message)
2122  File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/lib-tk/tkMessageBox.py", line 89, in showerror
2123    return _show(title, message, ERROR, OK, **options)
2124  File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/lib-tk/tkMessageBox.py", line 72, in _show
2125    res = Message(**options).show()
2126  File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/lib-tk/tkCommonDialog.py", line 48, in show
2127    s = w.tk.call(self.command, *w._options(self.options))
2128_tkinter.TclError: bad pad value "2m": must be positive screen distance
2129Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-spyder/work/spyder-1.0.3" && /opt/local/Library/Frameworks/Python.framework/Versions/2.6/bin/python2.6 setup.py --no-user-cfg build " returned error 1
2130DEBUG: Backtrace: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-spyder/work/spyder-1.0.3" && /opt/local/Library/Frameworks/Python.framework/Versions/2.6/bin/python2.6 setup.py --no-user-cfg build " returned error 1
2131    while executing
2132"command_exec build"
2133    (procedure "portbuild::build_main" line 9)
2134    invoked from within
2135"$procedure $targetname"
2136Warning: the following items did not execute (for py26-spyder): org.macports.activate org.macports.build org.macports.destroot org.macports.install
2137Error: Status 1 encountered during processing.
2138To report a bug, see <http://guide.macports.org/#project.tickets>