Ticket #23971: dsniff-devel-install.log

File dsniff-devel-install.log, 59.4 KB (added by omcalamai@…, 11 years ago)
Line 
1LocalHost:dsniff-devel sif$ sudo port -fd install dsniff-devel
2Password:
3DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net/dsniff-devel
4DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/dsniff-devel
5DEBUG: OS Platform: darwin
6DEBUG: OS Version: 9.8.0
7DEBUG: Mac OS X Version: 10.5
8DEBUG: System Arch: powerpc
9DEBUG: setting option os.universal_supported to yes
10DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
11DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
12DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
13DEBUG: adding the default universal variant
14DEBUG: Requested variant powerpc is not provided by port dsniff-devel.
15DEBUG: Requested variant darwin is not provided by port dsniff-devel.
16DEBUG: Requested variant macosx is not provided by port dsniff-devel.
17DEBUG: Executing variant darwin_9 provides darwin_9
18DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net/libpcap
19DEBUG: epoch: in tree: 0 installed: 0
20DEBUG: libpcap 1.0.0_1 exists in the ports tree
21DEBUG: libpcap 1.0.0_1  is the latest installed
22DEBUG: libpcap 1.0.0_1  is active
23DEBUG: Merging existing variants  into variants
24DEBUG: new fully merged portvariants:
25DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/libpcap
26DEBUG: OS Platform: darwin
27DEBUG: OS Version: 9.8.0
28DEBUG: Mac OS X Version: 10.5
29DEBUG: System Arch: powerpc
30DEBUG: setting option os.universal_supported to yes
31DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
32DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
33DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
34DEBUG: adding the default universal variant
35DEBUG: Requested variant powerpc is not provided by port libpcap.
36DEBUG: Requested variant darwin is not provided by port libpcap.
37DEBUG: Requested variant macosx is not provided by port libpcap.
38DEBUG: No need to upgrade! libpcap 1.0.0_1 >= libpcap 1.0.0_1
39DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXmu
40DEBUG: epoch: in tree: 0 installed: 0
41DEBUG: xorg-libXmu 1.0.5_0 exists in the ports tree
42DEBUG: xorg-libXmu 1.0.5_0  is the latest installed
43DEBUG: xorg-libXmu 1.0.5_0  is active
44DEBUG: Merging existing variants  into variants
45DEBUG: new fully merged portvariants:
46DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXmu
47DEBUG: OS Platform: darwin
48DEBUG: OS Version: 9.8.0
49DEBUG: Mac OS X Version: 10.5
50DEBUG: System Arch: powerpc
51DEBUG: setting option os.universal_supported to yes
52DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
53DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
54DEBUG: adding the default universal variant
55DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
56DEBUG: Requested variant powerpc is not provided by port xorg-libXmu.
57DEBUG: Requested variant darwin is not provided by port xorg-libXmu.
58DEBUG: Requested variant macosx is not provided by port xorg-libXmu.
59DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
60DEBUG: epoch: in tree: 0 installed: 0
61DEBUG: pkgconfig 0.23_1 exists in the ports tree
62DEBUG: pkgconfig 0.23_1  is the latest installed
63DEBUG: pkgconfig 0.23_1  is active
64DEBUG: Merging existing variants  into variants
65DEBUG: new fully merged portvariants:
66DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
67DEBUG: OS Platform: darwin
68DEBUG: OS Version: 9.8.0
69DEBUG: Mac OS X Version: 10.5
70DEBUG: System Arch: powerpc
71DEBUG: setting option os.universal_supported to yes
72DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
73DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
74DEBUG: adding the default universal variant
75DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
76DEBUG: Requested variant powerpc is not provided by port pkgconfig.
77DEBUG: Requested variant darwin is not provided by port pkgconfig.
78DEBUG: Requested variant macosx is not provided by port pkgconfig.
79DEBUG: No need to upgrade! pkgconfig 0.23_1 >= pkgconfig 0.23_1
80DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXext
81DEBUG: epoch: in tree: 0 installed: 0
82DEBUG: xorg-libXext 1.1.1_0 exists in the ports tree
83DEBUG: xorg-libXext 1.1.1_0  is the latest installed
84DEBUG: xorg-libXext 1.1.1_0  is active
85DEBUG: Merging existing variants  into variants
86DEBUG: new fully merged portvariants:
87DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXext
88DEBUG: OS Platform: darwin
89DEBUG: OS Version: 9.8.0
90DEBUG: Mac OS X Version: 10.5
91DEBUG: System Arch: powerpc
92DEBUG: setting option os.universal_supported to yes
93DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
94DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
95DEBUG: adding the default universal variant
96DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
97DEBUG: Requested variant powerpc is not provided by port xorg-libXext.
98DEBUG: Requested variant darwin is not provided by port xorg-libXext.
99DEBUG: Requested variant macosx is not provided by port xorg-libXext.
100DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11
101DEBUG: epoch: in tree: 0 installed: 0
102DEBUG: xorg-libX11 1.3.3_0 exists in the ports tree
103DEBUG: xorg-libX11 1.3.3_0  is the latest installed
104DEBUG: xorg-libX11 1.3.3_0  is active
105DEBUG: Merging existing variants  into variants
106DEBUG: new fully merged portvariants:
107DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11
108DEBUG: OS Platform: darwin
109DEBUG: OS Version: 9.8.0
110DEBUG: Mac OS X Version: 10.5
111DEBUG: System Arch: powerpc
112DEBUG: setting option os.universal_supported to yes
113DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
114DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
115DEBUG: adding the default universal variant
116DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
117DEBUG: Requested variant powerpc is not provided by port xorg-libX11.
118DEBUG: Requested variant darwin is not provided by port xorg-libX11.
119DEBUG: Requested variant macosx is not provided by port xorg-libX11.
120DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-util-macros
121DEBUG: epoch: in tree: 0 installed: 0
122DEBUG: xorg-util-macros 1.6.0_0 exists in the ports tree
123DEBUG: xorg-util-macros 1.6.0_0  is the latest installed
124DEBUG: xorg-util-macros 1.6.0_0  is active
125DEBUG: Merging existing variants  into variants
126DEBUG: new fully merged portvariants:
127DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-util-macros
128DEBUG: OS Platform: darwin
129DEBUG: OS Version: 9.8.0
130DEBUG: Mac OS X Version: 10.5
131DEBUG: System Arch: powerpc
132DEBUG: setting option os.universal_supported to yes
133DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
134DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
135DEBUG: 'universal_variant no' specified, so not adding the default universal variant
136DEBUG: Requested variant powerpc is not provided by port xorg-util-macros.
137DEBUG: Requested variant darwin is not provided by port xorg-util-macros.
138DEBUG: Requested variant macosx is not provided by port xorg-util-macros.
139DEBUG: No need to upgrade! xorg-util-macros 1.6.0_0 >= xorg-util-macros 1.6.0_0
140DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xtrans
141DEBUG: epoch: in tree: 0 installed: 0
142DEBUG: xorg-xtrans 1.2.5_0 exists in the ports tree
143DEBUG: xorg-xtrans 1.2.5_0  is the latest installed
144DEBUG: xorg-xtrans 1.2.5_0  is active
145DEBUG: Merging existing variants  into variants
146DEBUG: new fully merged portvariants:
147DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xtrans
148DEBUG: OS Platform: darwin
149DEBUG: OS Version: 9.8.0
150DEBUG: Mac OS X Version: 10.5
151DEBUG: System Arch: powerpc
152DEBUG: setting option os.universal_supported to yes
153DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
154DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
155DEBUG: 'universal_variant no' specified, so not adding the default universal variant
156DEBUG: Requested variant powerpc is not provided by port xorg-xtrans.
157DEBUG: Requested variant darwin is not provided by port xorg-xtrans.
158DEBUG: Requested variant macosx is not provided by port xorg-xtrans.
159DEBUG: No need to upgrade! xorg-xtrans 1.2.5_0 >= xorg-xtrans 1.2.5_0
160DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-bigreqsproto
161DEBUG: epoch: in tree: 0 installed: 0
162DEBUG: xorg-bigreqsproto 1.1.0_0 exists in the ports tree
163DEBUG: xorg-bigreqsproto 1.1.0_0  is the latest installed
164DEBUG: xorg-bigreqsproto 1.1.0_0  is active
165DEBUG: Merging existing variants  into variants
166DEBUG: new fully merged portvariants:
167DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-bigreqsproto
168DEBUG: OS Platform: darwin
169DEBUG: OS Version: 9.8.0
170DEBUG: Mac OS X Version: 10.5
171DEBUG: System Arch: powerpc
172DEBUG: setting option os.universal_supported to yes
173DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
174DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
175DEBUG: 'universal_variant no' specified, so not adding the default universal variant
176DEBUG: Requested variant powerpc is not provided by port xorg-bigreqsproto.
177DEBUG: Requested variant darwin is not provided by port xorg-bigreqsproto.
178DEBUG: Requested variant macosx is not provided by port xorg-bigreqsproto.
179DEBUG: No need to upgrade! xorg-bigreqsproto 1.1.0_0 >= xorg-bigreqsproto 1.1.0_0
180DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcmiscproto
181DEBUG: epoch: in tree: 0 installed: 0
182DEBUG: xorg-xcmiscproto 1.2.0_0 exists in the ports tree
183DEBUG: xorg-xcmiscproto 1.2.0_0  is the latest installed
184DEBUG: xorg-xcmiscproto 1.2.0_0  is active
185DEBUG: Merging existing variants  into variants
186DEBUG: new fully merged portvariants:
187DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcmiscproto
188DEBUG: OS Platform: darwin
189DEBUG: OS Version: 9.8.0
190DEBUG: Mac OS X Version: 10.5
191DEBUG: System Arch: powerpc
192DEBUG: setting option os.universal_supported to yes
193DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
194DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
195DEBUG: 'universal_variant no' specified, so not adding the default universal variant
196DEBUG: Requested variant powerpc is not provided by port xorg-xcmiscproto.
197DEBUG: Requested variant darwin is not provided by port xorg-xcmiscproto.
198DEBUG: Requested variant macosx is not provided by port xorg-xcmiscproto.
199DEBUG: No need to upgrade! xorg-xcmiscproto 1.2.0_0 >= xorg-xcmiscproto 1.2.0_0
200DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto
201DEBUG: epoch: in tree: 0 installed: 0
202DEBUG: xorg-xextproto 7.1.1_0 exists in the ports tree
203DEBUG: xorg-xextproto 7.1.1_0  is the latest installed
204DEBUG: xorg-xextproto 7.1.1_0  is active
205DEBUG: Merging existing variants  into variants
206DEBUG: new fully merged portvariants:
207DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto
208DEBUG: OS Platform: darwin
209DEBUG: OS Version: 9.8.0
210DEBUG: Mac OS X Version: 10.5
211DEBUG: System Arch: powerpc
212DEBUG: setting option os.universal_supported to yes
213DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
214DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
215DEBUG: 'universal_variant no' specified, so not adding the default universal variant
216DEBUG: Requested variant powerpc is not provided by port xorg-xextproto.
217DEBUG: Requested variant darwin is not provided by port xorg-xextproto.
218DEBUG: Requested variant macosx is not provided by port xorg-xextproto.
219DEBUG: No need to upgrade! xorg-xextproto 7.1.1_0 >= xorg-xextproto 7.1.1_0
220DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xf86bigfontproto
221DEBUG: epoch: in tree: 0 installed: 0
222DEBUG: xorg-xf86bigfontproto 1.2.0_0 exists in the ports tree
223DEBUG: xorg-xf86bigfontproto 1.2.0_0  is the latest installed
224DEBUG: xorg-xf86bigfontproto 1.2.0_0  is active
225DEBUG: Merging existing variants  into variants
226DEBUG: new fully merged portvariants:
227DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xf86bigfontproto
228DEBUG: OS Platform: darwin
229DEBUG: OS Version: 9.8.0
230DEBUG: Mac OS X Version: 10.5
231DEBUG: System Arch: powerpc
232DEBUG: setting option os.universal_supported to yes
233DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
234DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
235DEBUG: 'universal_variant no' specified, so not adding the default universal variant
236DEBUG: Requested variant powerpc is not provided by port xorg-xf86bigfontproto.
237DEBUG: Requested variant darwin is not provided by port xorg-xf86bigfontproto.
238DEBUG: Requested variant macosx is not provided by port xorg-xf86bigfontproto.
239DEBUG: No need to upgrade! xorg-xf86bigfontproto 1.2.0_0 >= xorg-xf86bigfontproto 1.2.0_0
240DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-inputproto
241DEBUG: epoch: in tree: 0 installed: 0
242DEBUG: xorg-inputproto 2.0_0 exists in the ports tree
243DEBUG: xorg-inputproto 2.0_0  is the latest installed
244DEBUG: xorg-inputproto 2.0_0  is active
245DEBUG: Merging existing variants  into variants
246DEBUG: new fully merged portvariants:
247DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-inputproto
248DEBUG: OS Platform: darwin
249DEBUG: OS Version: 9.8.0
250DEBUG: Mac OS X Version: 10.5
251DEBUG: System Arch: powerpc
252DEBUG: setting option os.universal_supported to yes
253DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
254DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
255DEBUG: 'universal_variant no' specified, so not adding the default universal variant
256DEBUG: Requested variant powerpc is not provided by port xorg-inputproto.
257DEBUG: Requested variant darwin is not provided by port xorg-inputproto.
258DEBUG: Requested variant macosx is not provided by port xorg-inputproto.
259DEBUG: No need to upgrade! xorg-inputproto 2.0_0 >= xorg-inputproto 2.0_0
260DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp
261DEBUG: epoch: in tree: 0 installed: 0
262DEBUG: xorg-libXdmcp 1.0.3_0 exists in the ports tree
263DEBUG: xorg-libXdmcp 1.0.3_0  is the latest installed
264DEBUG: xorg-libXdmcp 1.0.3_0  is active
265DEBUG: Merging existing variants  into variants
266DEBUG: new fully merged portvariants:
267DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp
268DEBUG: OS Platform: darwin
269DEBUG: OS Version: 9.8.0
270DEBUG: Mac OS X Version: 10.5
271DEBUG: System Arch: powerpc
272DEBUG: setting option os.universal_supported to yes
273DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
274DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
275DEBUG: adding the default universal variant
276DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
277DEBUG: Requested variant powerpc is not provided by port xorg-libXdmcp.
278DEBUG: Requested variant darwin is not provided by port xorg-libXdmcp.
279DEBUG: Requested variant macosx is not provided by port xorg-libXdmcp.
280DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto
281DEBUG: epoch: in tree: 0 installed: 0
282DEBUG: xorg-xproto 7.0.16_0 exists in the ports tree
283DEBUG: xorg-xproto 7.0.16_0  is the latest installed
284DEBUG: xorg-xproto 7.0.16_0  is active
285DEBUG: Merging existing variants  into variants
286DEBUG: new fully merged portvariants:
287DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto
288DEBUG: OS Platform: darwin
289DEBUG: OS Version: 9.8.0
290DEBUG: Mac OS X Version: 10.5
291DEBUG: System Arch: powerpc
292DEBUG: setting option os.universal_supported to yes
293DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
294DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
295DEBUG: 'universal_variant no' specified, so not adding the default universal variant
296DEBUG: Requested variant powerpc is not provided by port xorg-xproto.
297DEBUG: Requested variant darwin is not provided by port xorg-xproto.
298DEBUG: Requested variant macosx is not provided by port xorg-xproto.
299DEBUG: No need to upgrade! xorg-xproto 7.0.16_0 >= xorg-xproto 7.0.16_0
300DEBUG: No need to upgrade! xorg-libXdmcp 1.0.3_0 >= xorg-libXdmcp 1.0.3_0
301DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau
302DEBUG: epoch: in tree: 0 installed: 0
303DEBUG: xorg-libXau 1.0.5_0 exists in the ports tree
304DEBUG: xorg-libXau 1.0.5_0  is the latest installed
305DEBUG: xorg-libXau 1.0.5_0  is active
306DEBUG: Merging existing variants  into variants
307DEBUG: new fully merged portvariants:
308DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau
309DEBUG: OS Platform: darwin
310DEBUG: OS Version: 9.8.0
311DEBUG: Mac OS X Version: 10.5
312DEBUG: System Arch: powerpc
313DEBUG: setting option os.universal_supported to yes
314DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
315DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
316DEBUG: adding the default universal variant
317DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
318DEBUG: Requested variant powerpc is not provided by port xorg-libXau.
319DEBUG: Requested variant darwin is not provided by port xorg-libXau.
320DEBUG: Requested variant macosx is not provided by port xorg-libXau.
321DEBUG: No need to upgrade! xorg-libXau 1.0.5_0 >= xorg-libXau 1.0.5_0
322DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto
323DEBUG: epoch: in tree: 0 installed: 0
324DEBUG: xorg-kbproto 1.0.4_0 exists in the ports tree
325DEBUG: xorg-kbproto 1.0.4_0  is the latest installed
326DEBUG: xorg-kbproto 1.0.4_0  is active
327DEBUG: Merging existing variants  into variants
328DEBUG: new fully merged portvariants:
329DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto
330DEBUG: OS Platform: darwin
331DEBUG: OS Version: 9.8.0
332DEBUG: Mac OS X Version: 10.5
333DEBUG: System Arch: powerpc
334DEBUG: setting option os.universal_supported to yes
335DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
336DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
337DEBUG: 'universal_variant no' specified, so not adding the default universal variant
338DEBUG: Requested variant powerpc is not provided by port xorg-kbproto.
339DEBUG: Requested variant darwin is not provided by port xorg-kbproto.
340DEBUG: Requested variant macosx is not provided by port xorg-kbproto.
341DEBUG: No need to upgrade! xorg-kbproto 1.0.4_0 >= xorg-kbproto 1.0.4_0
342DEBUG: No need to upgrade! xorg-libX11 1.3.3_0 >= xorg-libX11 1.3.3_0
343DEBUG: No need to upgrade! xorg-libXext 1.1.1_0 >= xorg-libXext 1.1.1_0
344DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXt
345DEBUG: epoch: in tree: 0 installed: 0
346DEBUG: xorg-libXt 1.0.7_1 exists in the ports tree
347DEBUG: xorg-libXt 1.0.7_1  is the latest installed
348DEBUG: xorg-libXt 1.0.7_1  is active
349DEBUG: Merging existing variants  into variants
350DEBUG: new fully merged portvariants:
351DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXt
352DEBUG: OS Platform: darwin
353DEBUG: OS Version: 9.8.0
354DEBUG: Mac OS X Version: 10.5
355DEBUG: System Arch: powerpc
356DEBUG: setting option os.universal_supported to yes
357DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
358DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
359DEBUG: adding the default universal variant
360DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
361DEBUG: Requested variant powerpc is not provided by port xorg-libXt.
362DEBUG: Requested variant darwin is not provided by port xorg-libXt.
363DEBUG: Requested variant macosx is not provided by port xorg-libXt.
364DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
365DEBUG: epoch: in tree: 0 installed: 0
366DEBUG: autoconf 2.65_1 exists in the ports tree
367DEBUG: autoconf 2.65_1  is the latest installed
368DEBUG: autoconf 2.65_1  is active
369DEBUG: Merging existing variants  into variants
370DEBUG: new fully merged portvariants:
371DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
372DEBUG: OS Platform: darwin
373DEBUG: OS Version: 9.8.0
374DEBUG: Mac OS X Version: 10.5
375DEBUG: System Arch: powerpc
376DEBUG: setting option os.universal_supported to yes
377DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
378DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
379DEBUG: 'universal_variant no' specified, so not adding the default universal variant
380DEBUG: Requested variant powerpc is not provided by port autoconf.
381DEBUG: Requested variant darwin is not provided by port autoconf.
382DEBUG: Requested variant macosx is not provided by port autoconf.
383DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
384DEBUG: epoch: in tree: 0 installed: 0
385DEBUG: perl5 5.8.9_0 exists in the ports tree
386DEBUG: perl5 5.8.9_0  is the latest installed
387DEBUG: perl5 5.8.9_0  is active
388DEBUG: Merging existing variants  into variants
389DEBUG: new fully merged portvariants:
390DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
391DEBUG: OS Platform: darwin
392DEBUG: OS Version: 9.8.0
393DEBUG: Mac OS X Version: 10.5
394DEBUG: System Arch: powerpc
395DEBUG: setting option os.universal_supported to yes
396DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
397DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
398DEBUG: 'universal_variant no' specified, so not adding the default universal variant
399DEBUG: Requested variant powerpc is not provided by port perl5.
400DEBUG: Requested variant darwin is not provided by port perl5.
401DEBUG: Requested variant macosx is not provided by port perl5.
402DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
403DEBUG: epoch: in tree: 0 installed: 0
404DEBUG: perl5.8 5.8.9_3 exists in the ports tree
405DEBUG: perl5.8 5.8.9_3  is the latest installed
406DEBUG: perl5.8 5.8.9_3  is active
407DEBUG: Merging existing variants  into variants
408DEBUG: new fully merged portvariants:
409DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
410DEBUG: OS Platform: darwin
411DEBUG: OS Version: 9.8.0
412DEBUG: Mac OS X Version: 10.5
413DEBUG: System Arch: powerpc
414DEBUG: setting option os.universal_supported to yes
415DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
416DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
417DEBUG: adding the default universal variant
418DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
419DEBUG: Requested variant powerpc is not provided by port perl5.8.
420DEBUG: Requested variant darwin is not provided by port perl5.8.
421DEBUG: Requested variant macosx is not provided by port perl5.8.
422DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3
423DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0
424DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
425DEBUG: epoch: in tree: 0 installed: 0
426DEBUG: m4 1.4.13_0 exists in the ports tree
427DEBUG: m4 1.4.13_0  is the latest installed
428DEBUG: m4 1.4.13_0  is active
429DEBUG: Merging existing variants  into variants
430DEBUG: new fully merged portvariants:
431DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
432DEBUG: OS Platform: darwin
433DEBUG: OS Version: 9.8.0
434DEBUG: Mac OS X Version: 10.5
435DEBUG: System Arch: powerpc
436DEBUG: setting option os.universal_supported to yes
437DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
438DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
439DEBUG: adding the default universal variant
440DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
441DEBUG: Requested variant powerpc is not provided by port m4.
442DEBUG: Requested variant darwin is not provided by port m4.
443DEBUG: Requested variant macosx is not provided by port m4.
444DEBUG: No need to upgrade! m4 1.4.13_0 >= m4 1.4.13_0
445DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
446DEBUG: epoch: in tree: 0 installed: 0
447DEBUG: help2man 1.37.1_1 exists in the ports tree
448DEBUG: help2man 1.37.1_1  is the latest installed
449DEBUG: help2man 1.37.1_1  is active
450DEBUG: Merging existing variants  into variants
451DEBUG: new fully merged portvariants:
452DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
453DEBUG: OS Platform: darwin
454DEBUG: OS Version: 9.8.0
455DEBUG: Mac OS X Version: 10.5
456DEBUG: System Arch: powerpc
457DEBUG: setting option os.universal_supported to yes
458DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
459DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
460DEBUG: adding the default universal variant
461DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
462DEBUG: Requested variant powerpc is not provided by port help2man.
463DEBUG: Requested variant darwin is not provided by port help2man.
464DEBUG: Requested variant macosx is not provided by port help2man.
465DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext
466DEBUG: epoch: in tree: 0 installed: 0
467DEBUG: p5-locale-gettext 1.05_2 exists in the ports tree
468DEBUG: p5-locale-gettext 1.05_2  is the latest installed
469DEBUG: p5-locale-gettext 1.05_2  is active
470DEBUG: Merging existing variants  into variants
471DEBUG: new fully merged portvariants:
472DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext
473DEBUG: OS Platform: darwin
474DEBUG: OS Version: 9.8.0
475DEBUG: Mac OS X Version: 10.5
476DEBUG: System Arch: powerpc
477DEBUG: setting option os.universal_supported to yes
478DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
479DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
480DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
481DEBUG: 'universal_variant no' specified, so not adding the default universal variant
482DEBUG: Requested variant powerpc is not provided by port p5-locale-gettext.
483DEBUG: Requested variant darwin is not provided by port p5-locale-gettext.
484DEBUG: Requested variant macosx is not provided by port p5-locale-gettext.
485DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
486DEBUG: epoch: in tree: 0 installed: 0
487DEBUG: gettext 0.17_4 exists in the ports tree
488DEBUG: gettext 0.17_4  is the latest installed
489DEBUG: gettext 0.17_4  is active
490DEBUG: Merging existing variants  into variants
491DEBUG: new fully merged portvariants:
492DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
493DEBUG: OS Platform: darwin
494DEBUG: OS Version: 9.8.0
495DEBUG: Mac OS X Version: 10.5
496DEBUG: System Arch: powerpc
497DEBUG: setting option os.universal_supported to yes
498DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
499DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
500DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
501DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
502DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
503DEBUG: universal variant already exists, so not adding the default one
504DEBUG: Requested variant powerpc is not provided by port gettext.
505DEBUG: Requested variant darwin is not provided by port gettext.
506DEBUG: Requested variant macosx is not provided by port gettext.
507DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
508DEBUG: epoch: in tree: 0 installed: 0
509DEBUG: libiconv 1.13.1_0 exists in the ports tree
510DEBUG: libiconv 1.13.1_0  is the latest installed
511DEBUG: libiconv 1.13.1_0  is active
512DEBUG: Merging existing variants  into variants
513DEBUG: new fully merged portvariants:
514DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
515DEBUG: OS Platform: darwin
516DEBUG: OS Version: 9.8.0
517DEBUG: Mac OS X Version: 10.5
518DEBUG: System Arch: powerpc
519DEBUG: setting option os.universal_supported to yes
520DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
521DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
522DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
523DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
524DEBUG: universal variant already exists, so not adding the default one
525DEBUG: Requested variant powerpc is not provided by port libiconv.
526DEBUG: Requested variant darwin is not provided by port libiconv.
527DEBUG: Requested variant macosx is not provided by port libiconv.
528DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
529DEBUG: epoch: in tree: 0 installed: 0
530DEBUG: gperf 3.0.4_0 exists in the ports tree
531DEBUG: gperf 3.0.4_0  is the latest installed
532DEBUG: gperf 3.0.4_0  is active
533DEBUG: Merging existing variants  into variants
534DEBUG: new fully merged portvariants:
535DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
536DEBUG: OS Platform: darwin
537DEBUG: OS Version: 9.8.0
538DEBUG: Mac OS X Version: 10.5
539DEBUG: System Arch: powerpc
540DEBUG: setting option os.universal_supported to yes
541DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
542DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
543DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
544DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
545DEBUG: universal variant already exists, so not adding the default one
546DEBUG: Requested variant powerpc is not provided by port gperf.
547DEBUG: Requested variant darwin is not provided by port gperf.
548DEBUG: Requested variant macosx is not provided by port gperf.
549DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0
550DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
551DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
552DEBUG: epoch: in tree: 0 installed: 0
553DEBUG: ncurses 5.7_0 exists in the ports tree
554DEBUG: ncurses 5.7_0  is the latest installed
555DEBUG: ncurses 5.7_0  is active
556DEBUG: Merging existing variants  into variants
557DEBUG: new fully merged portvariants:
558DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
559DEBUG: OS Platform: darwin
560DEBUG: OS Version: 9.8.0
561DEBUG: Mac OS X Version: 10.5
562DEBUG: System Arch: powerpc
563DEBUG: setting option os.universal_supported to yes
564DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
565DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
566DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
567DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
568DEBUG: universal variant already exists, so not adding the default one
569DEBUG: Requested variant powerpc is not provided by port ncurses.
570DEBUG: Requested variant darwin is not provided by port ncurses.
571DEBUG: Requested variant macosx is not provided by port ncurses.
572DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
573DEBUG: epoch: in tree: 0 installed: 0
574DEBUG: ncursesw 5.7_0 exists in the ports tree
575DEBUG: ncursesw 5.7_0  is the latest installed
576DEBUG: ncursesw 5.7_0  is active
577DEBUG: Merging existing variants  into variants
578DEBUG: new fully merged portvariants:
579DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
580DEBUG: OS Platform: darwin
581DEBUG: OS Version: 9.8.0
582DEBUG: Mac OS X Version: 10.5
583DEBUG: System Arch: powerpc
584DEBUG: setting option os.universal_supported to yes
585DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
586DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
587DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
588DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
589DEBUG: universal variant already exists, so not adding the default one
590DEBUG: Requested variant powerpc is not provided by port ncursesw.
591DEBUG: Requested variant darwin is not provided by port ncursesw.
592DEBUG: Requested variant macosx is not provided by port ncursesw.
593DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
594DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
595DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
596DEBUG: epoch: in tree: 0 installed: 0
597DEBUG: expat 2.0.1_0 exists in the ports tree
598DEBUG: expat 2.0.1_0  is the latest installed
599DEBUG: expat 2.0.1_0  is active
600DEBUG: Merging existing variants  into variants
601DEBUG: new fully merged portvariants:
602DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
603DEBUG: OS Platform: darwin
604DEBUG: OS Version: 9.8.0
605DEBUG: Mac OS X Version: 10.5
606DEBUG: System Arch: powerpc
607DEBUG: setting option os.universal_supported to yes
608DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
609DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
610DEBUG: adding the default universal variant
611DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
612DEBUG: Requested variant powerpc is not provided by port expat.
613DEBUG: Requested variant darwin is not provided by port expat.
614DEBUG: Requested variant macosx is not provided by port expat.
615DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
616DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4
617DEBUG: No need to upgrade! p5-locale-gettext 1.05_2 >= p5-locale-gettext 1.05_2
618DEBUG: No need to upgrade! help2man 1.37.1_1 >= help2man 1.37.1_1
619DEBUG: No need to upgrade! autoconf 2.65_1 >= autoconf 2.65_1
620DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
621DEBUG: epoch: in tree: 0 installed: 0
622DEBUG: automake 1.11.1_0 exists in the ports tree
623DEBUG: automake 1.11.1_0  is the latest installed
624DEBUG: automake 1.11.1_0  is active
625DEBUG: Merging existing variants  into variants
626DEBUG: new fully merged portvariants:
627DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
628DEBUG: OS Platform: darwin
629DEBUG: OS Version: 9.8.0
630DEBUG: Mac OS X Version: 10.5
631DEBUG: System Arch: powerpc
632DEBUG: setting option os.universal_supported to yes
633DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
634DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
635DEBUG: adding the default universal variant
636DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
637DEBUG: Requested variant powerpc is not provided by port automake.
638DEBUG: Requested variant darwin is not provided by port automake.
639DEBUG: Requested variant macosx is not provided by port automake.
640DEBUG: No need to upgrade! automake 1.11.1_0 >= automake 1.11.1_0
641DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
642DEBUG: epoch: in tree: 0 installed: 0
643DEBUG: libtool 2.2.6b_1 exists in the ports tree
644DEBUG: libtool 2.2.6b_1  is the latest installed
645DEBUG: libtool 2.2.6b_1  is active
646DEBUG: Merging existing variants  into variants
647DEBUG: new fully merged portvariants:
648DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
649DEBUG: OS Platform: darwin
650DEBUG: OS Version: 9.8.0
651DEBUG: Mac OS X Version: 10.5
652DEBUG: System Arch: powerpc
653DEBUG: setting option os.universal_supported to yes
654DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
655DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
656DEBUG: adding the default universal variant
657DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
658DEBUG: Requested variant powerpc is not provided by port libtool.
659DEBUG: Requested variant darwin is not provided by port libtool.
660DEBUG: Requested variant macosx is not provided by port libtool.
661DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/grep
662DEBUG: epoch: in tree: 0 installed: 0
663DEBUG: grep 2.5.4_0 exists in the ports tree
664DEBUG: grep 2.5.4_0  is the latest installed
665DEBUG: grep 2.5.4_0  is active
666DEBUG: Merging existing variants  into variants
667DEBUG: new fully merged portvariants:
668DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/grep
669DEBUG: OS Platform: darwin
670DEBUG: OS Version: 9.8.0
671DEBUG: Mac OS X Version: 10.5
672DEBUG: System Arch: powerpc
673DEBUG: setting option os.universal_supported to yes
674DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
675DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
676DEBUG: adding the default universal variant
677DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
678DEBUG: Requested variant powerpc is not provided by port grep.
679DEBUG: Requested variant darwin is not provided by port grep.
680DEBUG: Requested variant macosx is not provided by port grep.
681DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pcre
682DEBUG: epoch: in tree: 0 installed: 0
683DEBUG: pcre 7.9_0 exists in the ports tree
684DEBUG: pcre 7.9_0  is the latest installed
685DEBUG: pcre 7.9_0  is active
686DEBUG: Merging existing variants  into variants
687DEBUG: new fully merged portvariants:
688DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pcre
689DEBUG: OS Platform: darwin
690DEBUG: OS Version: 9.8.0
691DEBUG: Mac OS X Version: 10.5
692DEBUG: System Arch: powerpc
693DEBUG: setting option os.universal_supported to yes
694DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
695DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
696DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
697DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
698DEBUG: universal variant already exists, so not adding the default one
699DEBUG: Requested variant powerpc is not provided by port pcre.
700DEBUG: Requested variant darwin is not provided by port pcre.
701DEBUG: Requested variant macosx is not provided by port pcre.
702DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
703DEBUG: epoch: in tree: 0 installed: 0
704DEBUG: readline 6.1.000_1 exists in the ports tree
705DEBUG: readline 6.1.000_1 +darwin is the latest installed
706DEBUG: readline 6.1.000_1 +darwin is active
707DEBUG: Merging existing variants darwin into variants
708DEBUG: new fully merged portvariants:
709DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
710DEBUG: OS Platform: darwin
711DEBUG: OS Version: 9.8.0
712DEBUG: Mac OS X Version: 10.5
713DEBUG: System Arch: powerpc
714DEBUG: setting option os.universal_supported to yes
715DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
716DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
717DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
718DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
719DEBUG: universal variant already exists, so not adding the default one
720DEBUG: Requested variant powerpc is not provided by port readline.
721DEBUG: Requested variant macosx is not provided by port readline.
722DEBUG: Executing variant darwin provides darwin
723DEBUG: No need to upgrade! readline 6.1.000_1 >= readline 6.1.000_1
724DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
725DEBUG: epoch: in tree: 0 installed: 0
726DEBUG: zlib 1.2.3_4 exists in the ports tree
727DEBUG: zlib 1.2.3_4  is the latest installed
728DEBUG: zlib 1.2.3_4  is active
729DEBUG: Merging existing variants  into variants
730DEBUG: new fully merged portvariants:
731DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
732DEBUG: OS Platform: darwin
733DEBUG: OS Version: 9.8.0
734DEBUG: Mac OS X Version: 10.5
735DEBUG: System Arch: powerpc
736DEBUG: setting option os.universal_supported to yes
737DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
738DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
739DEBUG: adding the default universal variant
740DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
741DEBUG: Requested variant powerpc is not provided by port zlib.
742DEBUG: Requested variant darwin is not provided by port zlib.
743DEBUG: Requested variant macosx is not provided by port zlib.
744DEBUG: No need to upgrade! zlib 1.2.3_4 >= zlib 1.2.3_4
745DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
746DEBUG: epoch: in tree: 0 installed: 0
747DEBUG: bzip2 1.0.5_3 exists in the ports tree
748DEBUG: bzip2 1.0.5_3 +darwin is the latest installed
749DEBUG: bzip2 1.0.5_3 +darwin is active
750DEBUG: Merging existing variants darwin into variants
751DEBUG: new fully merged portvariants:
752DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
753DEBUG: OS Platform: darwin
754DEBUG: OS Version: 9.8.0
755DEBUG: Mac OS X Version: 10.5
756DEBUG: System Arch: powerpc
757DEBUG: setting option os.universal_supported to yes
758DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
759DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
760DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
761DEBUG: universal variant already exists, so not adding the default one
762DEBUG: Requested variant powerpc is not provided by port bzip2.
763DEBUG: Requested variant macosx is not provided by port bzip2.
764DEBUG: Executing variant darwin provides darwin
765DEBUG: No need to upgrade! bzip2 1.0.5_3 >= bzip2 1.0.5_3
766DEBUG: No need to upgrade! pcre 7.9_0 >= pcre 7.9_0
767DEBUG: No need to upgrade! grep 2.5.4_0 >= grep 2.5.4_0
768DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/gsed
769DEBUG: epoch: in tree: 0 installed: 0
770DEBUG: gsed 4.2.1_0 exists in the ports tree
771DEBUG: gsed 4.2.1_0  is the latest installed
772DEBUG: gsed 4.2.1_0  is active
773DEBUG: Merging existing variants  into variants
774DEBUG: new fully merged portvariants:
775DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/gsed
776DEBUG: OS Platform: darwin
777DEBUG: OS Version: 9.8.0
778DEBUG: Mac OS X Version: 10.5
779DEBUG: System Arch: powerpc
780DEBUG: setting option os.universal_supported to yes
781DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
782DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
783DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
784DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
785DEBUG: universal variant already exists, so not adding the default one
786DEBUG: Requested variant powerpc is not provided by port gsed.
787DEBUG: Requested variant darwin is not provided by port gsed.
788DEBUG: Requested variant macosx is not provided by port gsed.
789DEBUG: No need to upgrade! gsed 4.2.1_0 >= gsed 4.2.1_0
790DEBUG: No need to upgrade! libtool 2.2.6b_1 >= libtool 2.2.6b_1
791DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libsm
792DEBUG: epoch: in tree: 0 installed: 0
793DEBUG: xorg-libsm 1.1.1_0 exists in the ports tree
794DEBUG: xorg-libsm 1.1.1_0  is the latest installed
795DEBUG: xorg-libsm 1.1.1_0  is active
796DEBUG: Merging existing variants  into variants
797DEBUG: new fully merged portvariants:
798DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libsm
799DEBUG: OS Platform: darwin
800DEBUG: OS Version: 9.8.0
801DEBUG: Mac OS X Version: 10.5
802DEBUG: System Arch: powerpc
803DEBUG: setting option os.universal_supported to yes
804DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
805DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
806DEBUG: adding the default universal variant
807DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
808DEBUG: Requested variant powerpc is not provided by port xorg-libsm.
809DEBUG: Requested variant darwin is not provided by port xorg-libsm.
810DEBUG: Requested variant macosx is not provided by port xorg-libsm.
811DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libice
812DEBUG: epoch: in tree: 0 installed: 0
813DEBUG: xorg-libice 1.0.6_0 exists in the ports tree
814DEBUG: xorg-libice 1.0.6_0  is the latest installed
815DEBUG: xorg-libice 1.0.6_0  is active
816DEBUG: Merging existing variants  into variants
817DEBUG: new fully merged portvariants:
818DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libice
819DEBUG: OS Platform: darwin
820DEBUG: OS Version: 9.8.0
821DEBUG: Mac OS X Version: 10.5
822DEBUG: System Arch: powerpc
823DEBUG: setting option os.universal_supported to yes
824DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
825DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
826DEBUG: adding the default universal variant
827DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
828DEBUG: Requested variant powerpc is not provided by port xorg-libice.
829DEBUG: Requested variant darwin is not provided by port xorg-libice.
830DEBUG: Requested variant macosx is not provided by port xorg-libice.
831DEBUG: No need to upgrade! xorg-libice 1.0.6_0 >= xorg-libice 1.0.6_0
832DEBUG: No need to upgrade! xorg-libsm 1.1.1_0 >= xorg-libsm 1.1.1_0
833DEBUG: No need to upgrade! xorg-libXt 1.0.7_1 >= xorg-libXt 1.0.7_1
834DEBUG: No need to upgrade! xorg-libXmu 1.0.5_0 >= xorg-libXmu 1.0.5_0
835DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net/libnids
836DEBUG: epoch: in tree: 0 installed: 0
837DEBUG: libnids 1.23_2 exists in the ports tree
838DEBUG: libnids 1.23_2  is the latest installed
839DEBUG: libnids 1.23_2  is active
840DEBUG: Merging existing variants  into variants
841DEBUG: new fully merged portvariants:
842DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/libnids
843DEBUG: OS Platform: darwin
844DEBUG: OS Version: 9.8.0
845DEBUG: Mac OS X Version: 10.5
846DEBUG: System Arch: powerpc
847DEBUG: setting option os.universal_supported to yes
848DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
849DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
850DEBUG: adding the default universal variant
851DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
852DEBUG: Requested variant powerpc is not provided by port libnids.
853DEBUG: Requested variant darwin is not provided by port libnids.
854DEBUG: Requested variant macosx is not provided by port libnids.
855DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net/libnet11
856DEBUG: epoch: in tree: 0 installed: 0
857DEBUG: libnet11 1.1.4_0 exists in the ports tree
858DEBUG: libnet11 1.1.4_0  is the latest installed
859DEBUG: libnet11 1.1.4_0  is active
860DEBUG: Merging existing variants  into variants
861DEBUG: new fully merged portvariants:
862DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/libnet11
863DEBUG: OS Platform: darwin
864DEBUG: OS Version: 9.8.0
865DEBUG: Mac OS X Version: 10.5
866DEBUG: System Arch: powerpc
867DEBUG: setting option os.universal_supported to yes
868DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
869DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
870DEBUG: adding the default universal variant
871DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
872DEBUG: Requested variant powerpc is not provided by port libnet11.
873DEBUG: Requested variant darwin is not provided by port libnet11.
874DEBUG: Requested variant macosx is not provided by port libnet11.
875DEBUG: No need to upgrade! libnet11 1.1.4_0 >= libnet11 1.1.4_0
876DEBUG: No need to upgrade! libnids 1.23_2 >= libnids 1.23_2
877--->  Computing dependencies for dsniff-devel
878DEBUG: Searching for dependency: libpcap
879DEBUG: Found Dependency: receipt exists for libpcap
880DEBUG: Searching for dependency: xorg-libXmu
881DEBUG: Found Dependency: receipt exists for xorg-libXmu
882DEBUG: Searching for dependency: libnids
883DEBUG: Found Dependency: receipt exists for libnids
884DEBUG: Executing org.macports.main (dsniff-devel)
885DEBUG: Skipping completed org.macports.fetch (dsniff-devel)
886DEBUG: Skipping completed org.macports.checksum (dsniff-devel)
887DEBUG: Skipping completed org.macports.extract (dsniff-devel)
888DEBUG: Skipping completed org.macports.patch (dsniff-devel)
889DEBUG: Skipping completed org.macports.configure (dsniff-devel)
890--->  Building dsniff-devel
891DEBUG: Executing org.macports.build (dsniff-devel)
892DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.5'
893DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_dsniff-devel/work/dsniff-2.4" && /usr/bin/make -j1 all'
894/usr/bin/gcc-4.0 -O2 -DBIND_8_COMPAT -arch ppc -D_BSD_SOURCE -DHAVE_SOCKADDR_SA_LEN -DDSNIFF_LIBDIR=\"/opt/local/lib/\" -I. -I/opt/local/include -I/opt/local/include -I/opt/local/include  -I/opt/local/include  -I./missing -c ./arpspoof.c
895In file included from ./arpspoof.c:25:
896./arp.h:14: warning: 'struct ether_addr' declared inside parameter list
897./arp.h:14: warning: its scope is only this definition or declaration, which is probably not what you want
898./arpspoof.c:28: warning: 'struct ether_addr' declared inside parameter list
899./arpspoof.c: In function 'arp_send':
900./arpspoof.c:51: warning: passing argument 1 of 'libnet_get_hwaddr' from incompatible pointer type
901./arpspoof.c:51: error: too many arguments to function 'libnet_get_hwaddr'
902./arpspoof.c:60: warning: pointer targets in assignment differ in signedness
903./arpspoof.c:62: warning: passing argument 6 of 'libnet_build_ethernet' from incompatible pointer type
904./arpspoof.c:62: error: too few arguments to function 'libnet_build_ethernet'
905./arpspoof.c:66: error: 'ETH_H' undeclared (first use in this function)
906./arpspoof.c:66: error: (Each undeclared identifier is reported only once
907./arpspoof.c:66: error: for each function it appears in.)
908./arpspoof.c:66: error: too few arguments to function 'libnet_build_arp'
909./arpspoof.c:69: warning: passing argument 1 of 'ether_ntoa' from incompatible pointer type
910./arpspoof.c:73: warning: passing argument 1 of 'ether_ntoa' from incompatible pointer type
911./arpspoof.c:79: warning: passing argument 1 of 'ether_ntoa' from incompatible pointer type
912./arpspoof.c:82: warning: passing argument 1 of 'ether_ntoa' from incompatible pointer type
913./arpspoof.c: In function 'arp_find':
914./arpspoof.c:116: warning: passing argument 2 of 'arp_cache_lookup' from incompatible pointer type
915./arpspoof.c: In function 'main':
916./arpspoof.c:185: warning: assignment makes pointer from integer without a cast
917make: *** [arpspoof.o] Error 1
918Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_dsniff-devel/work/dsniff-2.4" && /usr/bin/make -j1 all " returned error 2
919DEBUG: Backtrace: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_dsniff-devel/work/dsniff-2.4" && /usr/bin/make -j1 all " returned error 2
920    while executing
921"command_exec build"
922    (procedure "portbuild::build_main" line 9)
923    invoked from within
924"$procedure $targetname"
925Warning: the following items did not execute (for dsniff-devel): org.macports.activate org.macports.build org.macports.destroot org.macports.install
926Error: Status 1 encountered during processing.
927To report a bug, see <http://guide.macports.org/#project.tickets>
928LocalHost:dsniff-devel sif$