Ticket #25367: log

File log, 53.2 KB (added by eoffermann@…, 14 years ago)

Complete contents of log while installing gtk-doc

Line 
1version:1
2:debug:main epoch: in tree: 0 installed: 0
3:debug:main rarian 0.8.1_0 exists in the ports tree
4:debug:main rarian 0.8.1_0  is the latest installed
5:debug:main rarian 0.8.1_0  is active
6:debug:main Merging existing variants '' into variants
7:debug:main new fully merged portvariants:
8:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/rarian
9:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
10:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
11:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
12:debug:main adding the default universal variant
13:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
14:debug:main No need to upgrade! rarian 0.8.1_0 >= rarian 0.8.1_0
15:debug:main epoch: in tree: 0 installed: 0
16:debug:main libxslt 1.1.26_0 exists in the ports tree
17:debug:main libxslt 1.1.26_0  is the latest installed
18:debug:main libxslt 1.1.26_0  is active
19:debug:main Merging existing variants '' into variants
20:debug:main new fully merged portvariants:
21:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxslt
22:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
23:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
24:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
25:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
26:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
27:debug:main universal variant already exists, so not adding the default one
28:debug:main No need to upgrade! libxslt 1.1.26_0 >= libxslt 1.1.26_0
29:debug:main epoch: in tree: 0 installed: 0
30:debug:main libiconv 1.13.1_0 exists in the ports tree
31:debug:main libiconv 1.13.1_0  is the latest installed
32:debug:main libiconv 1.13.1_0  is active
33:debug:main Merging existing variants '' into variants
34:debug:main new fully merged portvariants:
35:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
36:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
37:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
38:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
39:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
40:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
41:debug:main universal variant already exists, so not adding the default one
42:debug:main No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
43:debug:main epoch: in tree: 0 installed: 0
44:debug:main libxml2 2.7.7_0 exists in the ports tree
45:debug:main libxml2 2.7.7_0  is the latest installed
46:debug:main libxml2 2.7.7_0  is active
47:debug:main Merging existing variants '' into variants
48:debug:main new fully merged portvariants:
49:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2
50:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
51:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
52:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
53:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
54:debug:main adding the default universal variant
55:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
56:debug:main No need to upgrade! libxml2 2.7.7_0 >= libxml2 2.7.7_0
57:debug:main epoch: in tree: 0 installed: 0
58:debug:main zlib 1.2.5_0 exists in the ports tree
59:debug:main zlib 1.2.5_0  is the latest installed
60:debug:main zlib 1.2.5_0  is active
61:debug:main Merging existing variants '' into variants
62:debug:main new fully merged portvariants:
63:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
64:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
65:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
66:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
67:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
68:debug:main adding the default universal variant
69:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
70:debug:main No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0
71:debug:main epoch: in tree: 0 installed: 0
72:debug:main gnome-doc-utils 0.18.1_1 exists in the ports tree
73:debug:main gnome-doc-utils 0.18.1_1  is the latest installed
74:debug:main gnome-doc-utils 0.18.1_1  is active
75:debug:main Merging existing variants '' into variants
76:debug:main new fully merged portvariants:
77:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gnome-doc-utils
78:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
79:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
80:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
81:debug:main only one arch supported, so not adding the default universal variant
82:debug:main No need to upgrade! gnome-doc-utils 0.18.1_1 >= gnome-doc-utils 0.18.1_1
83:debug:main epoch: in tree: 0 installed: 0
84:debug:main gettext 0.18.1.1_0 exists in the ports tree
85:debug:main gettext 0.18.1.1_0  is the latest installed
86:debug:main gettext 0.18.1.1_0  is active
87:debug:main Merging existing variants '' into variants
88:debug:main new fully merged portvariants:
89:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
90:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
91:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
92:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
93:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
94:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
95:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
96:debug:main universal variant already exists, so not adding the default one
97:debug:main No need to upgrade! gettext 0.18.1.1_0 >= gettext 0.18.1.1_0
98:debug:main epoch: in tree: 0 installed: 0
99:debug:main ncurses 5.7_0 exists in the ports tree
100:debug:main ncurses 5.7_0  is the latest installed
101:debug:main ncurses 5.7_0  is active
102:debug:main Merging existing variants '' into variants
103:debug:main new fully merged portvariants:
104:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
105:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
106:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
107:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
108:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
109:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
110:debug:main universal variant already exists, so not adding the default one
111:debug:main No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
112:debug:main epoch: in tree: 0 installed: 0
113:debug:main ncursesw 5.7_0 exists in the ports tree
114:debug:main ncursesw 5.7_0  is the latest installed
115:debug:main ncursesw 5.7_0  is active
116:debug:main Merging existing variants '' into variants
117:debug:main new fully merged portvariants:
118:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
119:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
120:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
121:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
122:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
123:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
124:debug:main universal variant already exists, so not adding the default one
125:debug:main No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
126:debug:main epoch: in tree: 0 installed: 0
127:debug:main expat 2.0.1_0 exists in the ports tree
128:debug:main expat 2.0.1_0  is the latest installed
129:debug:main expat 2.0.1_0  is active
130:debug:main Merging existing variants '' into variants
131:debug:main new fully merged portvariants:
132:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
133:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
134:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
135:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
136:debug:main adding the default universal variant
137:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
138:debug:main No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
139:debug:main epoch: in tree: 0 installed: 0
140:debug:main python26 2.6.5_2 exists in the ports tree
141:debug:main python26 2.6.5_2  is the latest installed
142:debug:main python26 2.6.5_2  is active
143:debug:main Merging existing variants '' into variants
144:debug:main new fully merged portvariants:
145:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python26
146:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
147:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
148:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
149:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
150:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
151:debug:main universal variant already exists, so not adding the default one
152:debug:main No need to upgrade! python26 2.6.5_2 >= python26 2.6.5_2
153:debug:main epoch: in tree: 1 installed: 1
154:debug:main openssl 0.9.8o_0 exists in the ports tree
155:debug:main openssl 0.9.8o_0  is the latest installed
156:debug:main openssl 0.9.8o_0  is active
157:debug:main Merging existing variants '' into variants
158:debug:main new fully merged portvariants:
159:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
160:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
161:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
162:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
163:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
164:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
165:debug:main universal variant already exists, so not adding the default one
166:debug:main No need to upgrade! openssl 0.9.8o_0 >= openssl 0.9.8o_0
167:debug:main epoch: in tree: 0 installed: 0
168:debug:main tk 8.5.8_0 exists in the ports tree
169:debug:main tk 8.5.8_0  is the latest installed
170:debug:main tk 8.5.8_0  is active
171:debug:main Merging existing variants '' into variants
172:debug:main new fully merged portvariants:
173:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/tk
174:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
175:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
176:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
177:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
178:debug:main adding the default universal variant
179:debug:main No need to upgrade! tk 8.5.8_0 >= tk 8.5.8_0
180:debug:main epoch: in tree: 0 installed: 0
181:debug:main tcl 8.5.8_0 exists in the ports tree
182:debug:main tcl 8.5.8_0  is the latest installed
183:debug:main tcl 8.5.8_0  is active
184:debug:main Merging existing variants '' into variants
185:debug:main new fully merged portvariants:
186:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/tcl
187:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
188:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
189:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
190:debug:main adding the default universal variant
191:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
192:debug:main No need to upgrade! tcl 8.5.8_0 >= tcl 8.5.8_0
193:debug:main epoch: in tree: 0 installed: 0
194:debug:main Xft2 2.1.14_0 exists in the ports tree
195:debug:main Xft2 2.1.14_0  is the latest installed
196:debug:main Xft2 2.1.14_0  is active
197:debug:main Merging existing variants '' into variants
198:debug:main new fully merged portvariants:
199:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2
200:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
201:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
202:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
203:debug:main adding the default universal variant
204:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
205:debug:main No need to upgrade! Xft2 2.1.14_0 >= Xft2 2.1.14_0
206:debug:main epoch: in tree: 0 installed: 0
207:debug:main xrender 0.9.6_0 exists in the ports tree
208:debug:main xrender 0.9.6_0  is the latest installed
209:debug:main xrender 0.9.6_0  is active
210:debug:main Merging existing variants '' into variants
211:debug:main new fully merged portvariants:
212:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender
213:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
214:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
215:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
216:debug:main adding the default universal variant
217:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
218:debug:main No need to upgrade! xrender 0.9.6_0 >= xrender 0.9.6_0
219:debug:main epoch: in tree: 0 installed: 0
220:debug:main xorg-libX11 1.3.4_0 exists in the ports tree
221:debug:main xorg-libX11 1.3.4_0  is the latest installed
222:debug:main xorg-libX11 1.3.4_0  is active
223:debug:main Merging existing variants '' into variants
224:debug:main new fully merged portvariants:
225:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11
226:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
227:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
228:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
229:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
230:debug:main adding the default universal variant
231:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
232:debug:main No need to upgrade! xorg-libX11 1.3.4_0 >= xorg-libX11 1.3.4_0
233:debug:main epoch: in tree: 0 installed: 0
234:debug:main xorg-libXdmcp 1.0.3_0 exists in the ports tree
235:debug:main xorg-libXdmcp 1.0.3_0  is the latest installed
236:debug:main xorg-libXdmcp 1.0.3_0  is active
237:debug:main Merging existing variants '' into variants
238:debug:main new fully merged portvariants:
239:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp
240:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
241:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
242:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
243:debug:main adding the default universal variant
244:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
245:debug:main No need to upgrade! xorg-libXdmcp 1.0.3_0 >= xorg-libXdmcp 1.0.3_0
246:debug:main epoch: in tree: 0 installed: 0
247:debug:main xorg-libXau 1.0.5_0 exists in the ports tree
248:debug:main xorg-libXau 1.0.5_0  is the latest installed
249:debug:main xorg-libXau 1.0.5_0  is active
250:debug:main Merging existing variants '' into variants
251:debug:main new fully merged portvariants:
252:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau
253:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
254:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
255:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
256:debug:main adding the default universal variant
257:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
258:debug:main No need to upgrade! xorg-libXau 1.0.5_0 >= xorg-libXau 1.0.5_0
259:debug:main epoch: in tree: 0 installed: 0
260:debug:main xorg-xproto 7.0.17_0 exists in the ports tree
261:debug:main xorg-xproto 7.0.17_0  is the latest installed
262:debug:main xorg-xproto 7.0.17_0  is active
263:debug:main Merging existing variants '' into variants
264:debug:main new fully merged portvariants:
265:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto
266:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
267:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
268:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
269:debug:main only one arch supported, so not adding the default universal variant
270:debug:main No need to upgrade! xorg-xproto 7.0.17_0 >= xorg-xproto 7.0.17_0
271:debug:main epoch: in tree: 0 installed: 0
272:debug:main xorg-kbproto 1.0.4_0 exists in the ports tree
273:debug:main xorg-kbproto 1.0.4_0  is the latest installed
274:debug:main xorg-kbproto 1.0.4_0  is active
275:debug:main Merging existing variants '' into variants
276:debug:main new fully merged portvariants:
277:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto
278:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
279:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
280:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
281:debug:main only one arch supported, so not adding the default universal variant
282:debug:main No need to upgrade! xorg-kbproto 1.0.4_0 >= xorg-kbproto 1.0.4_0
283:debug:main epoch: in tree: 0 installed: 0
284:debug:main xorg-renderproto 0.11_0 exists in the ports tree
285:debug:main xorg-renderproto 0.11_0  is the latest installed
286:debug:main xorg-renderproto 0.11_0  is active
287:debug:main Merging existing variants '' into variants
288:debug:main new fully merged portvariants:
289:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-renderproto
290:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
291:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
292:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
293:debug:main only one arch supported, so not adding the default universal variant
294:debug:main No need to upgrade! xorg-renderproto 0.11_0 >= xorg-renderproto 0.11_0
295:debug:main epoch: in tree: 0 installed: 0
296:debug:main freetype 2.3.12_0 exists in the ports tree
297:debug:main freetype 2.3.12_0  is the latest installed
298:debug:main freetype 2.3.12_0  is active
299:debug:main Merging existing variants '' into variants
300:debug:main new fully merged portvariants:
301:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype
302:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
303:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
304:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
305:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
306:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
307:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
308:debug:main universal variant already exists, so not adding the default one
309:debug:main No need to upgrade! freetype 2.3.12_0 >= freetype 2.3.12_0
310:debug:main epoch: in tree: 0 installed: 0
311:debug:main fontconfig 2.8.0_0 exists in the ports tree
312:debug:main fontconfig 2.8.0_0  is the latest installed
313:debug:main fontconfig 2.8.0_0  is active
314:debug:main Merging existing variants '' into variants
315:debug:main new fully merged portvariants:
316:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig
317:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
318:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
319:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
320:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
321:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
322:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
323:debug:main universal variant already exists, so not adding the default one
324:debug:main No need to upgrade! fontconfig 2.8.0_0 >= fontconfig 2.8.0_0
325:debug:main epoch: in tree: 0 installed: 0
326:debug:main xorg-libXScrnSaver 1.2.0_0 exists in the ports tree
327:debug:main xorg-libXScrnSaver 1.2.0_0  is the latest installed
328:debug:main xorg-libXScrnSaver 1.2.0_0  is active
329:debug:main Merging existing variants '' into variants
330:debug:main new fully merged portvariants:
331:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXScrnSaver
332:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
333:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
334:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
335:debug:main adding the default universal variant
336:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
337:debug:main No need to upgrade! xorg-libXScrnSaver 1.2.0_0 >= xorg-libXScrnSaver 1.2.0_0
338:debug:main epoch: in tree: 0 installed: 0
339:debug:main xorg-libXext 1.1.2_0 exists in the ports tree
340:debug:main xorg-libXext 1.1.2_0  is the latest installed
341:debug:main xorg-libXext 1.1.2_0  is active
342:debug:main Merging existing variants '' into variants
343:debug:main new fully merged portvariants:
344:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXext
345:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
346:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
347:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
348:debug:main adding the default universal variant
349:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
350:debug:main No need to upgrade! xorg-libXext 1.1.2_0 >= xorg-libXext 1.1.2_0
351:debug:main epoch: in tree: 0 installed: 0
352:debug:main xorg-xextproto 7.1.1_0 exists in the ports tree
353:debug:main xorg-xextproto 7.1.1_0  is the latest installed
354:debug:main xorg-xextproto 7.1.1_0  is active
355:debug:main Merging existing variants '' into variants
356:debug:main new fully merged portvariants:
357:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto
358:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
359:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
360:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
361:debug:main only one arch supported, so not adding the default universal variant
362:debug:main No need to upgrade! xorg-xextproto 7.1.1_0 >= xorg-xextproto 7.1.1_0
363:debug:main epoch: in tree: 0 installed: 0
364:debug:main xorg-scrnsaverproto 1.2.0_0 exists in the ports tree
365:debug:main xorg-scrnsaverproto 1.2.0_0  is the latest installed
366:debug:main xorg-scrnsaverproto 1.2.0_0  is active
367:debug:main Merging existing variants '' into variants
368:debug:main new fully merged portvariants:
369:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-scrnsaverproto
370:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
371:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
372:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
373:debug:main only one arch supported, so not adding the default universal variant
374:debug:main No need to upgrade! xorg-scrnsaverproto 1.2.0_0 >= xorg-scrnsaverproto 1.2.0_0
375:debug:main epoch: in tree: 0 installed: 0
376:debug:main sqlite3 3.6.23.1_0 exists in the ports tree
377:debug:main sqlite3 3.6.23.1_0  is the latest installed
378:debug:main sqlite3 3.6.23.1_0  is active
379:debug:main Merging existing variants '' into variants
380:debug:main new fully merged portvariants:
381:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3
382:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
383:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
384:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
385:debug:main adding the default universal variant
386:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
387:debug:main No need to upgrade! sqlite3 3.6.23.1_0 >= sqlite3 3.6.23.1_0
388:debug:main epoch: in tree: 0 installed: 0
389:debug:main readline 6.1.000_1 exists in the ports tree
390:debug:main readline 6.1.000_1  is the latest installed
391:debug:main readline 6.1.000_1  is active
392:debug:main Merging existing variants '' into variants
393:debug:main new fully merged portvariants:
394:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
395:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
396:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
397:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
398:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
399:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
400:debug:main universal variant already exists, so not adding the default one
401:debug:main No need to upgrade! readline 6.1.000_1 >= readline 6.1.000_1
402:debug:main epoch: in tree: 0 installed: 0
403:debug:main db46 4.6.21_6 exists in the ports tree
404:debug:main db46 4.6.21_6  is the latest installed
405:debug:main db46 4.6.21_6  is active
406:debug:main Merging existing variants '' into variants
407:debug:main new fully merged portvariants:
408:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46
409:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
410:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
411:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
412:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
413:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
414:debug:main universal variant already exists, so not adding the default one
415:debug:main No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6
416:debug:main epoch: in tree: 0 installed: 0
417:debug:main gdbm 1.8.3_2 exists in the ports tree
418:debug:main gdbm 1.8.3_2  is the latest installed
419:debug:main gdbm 1.8.3_2  is active
420:debug:main Merging existing variants '' into variants
421:debug:main new fully merged portvariants:
422:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm
423:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
424:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
425:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
426:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
427:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
428:debug:main universal variant already exists, so not adding the default one
429:debug:main No need to upgrade! gdbm 1.8.3_2 >= gdbm 1.8.3_2
430:debug:main epoch: in tree: 0 installed: 0
431:debug:main bzip2 1.0.5_3 exists in the ports tree
432:debug:main bzip2 1.0.5_3 +darwin is the latest installed
433:debug:main bzip2 1.0.5_3 +darwin is active
434:debug:main Merging existing variants '+darwin' into variants
435:debug:main new fully merged portvariants: darwin +
436:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
437:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
438:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
439:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
440:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
441:debug:main universal variant already exists, so not adding the default one
442:debug:main Requested variant darwin is not provided by port bzip2.
443:debug:main Skipping upgrade since bzip2 1.0.5_3 >= bzip2 1.0.5_3, even though installed variants "+darwin" do not match "".
444:debug:main epoch: in tree: 0 installed: 0
445:debug:main docbook-xml 5.0_0 exists in the ports tree
446:debug:main docbook-xml 5.0_0  is the latest installed
447:debug:main docbook-xml 5.0_0  is active
448:debug:main Merging existing variants '' into variants
449:debug:main new fully merged portvariants:
450:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml
451:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
452:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
453:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
454:debug:main universal_variant is false, so not adding the default universal variant
455:debug:main No need to upgrade! docbook-xml 5.0_0 >= docbook-xml 5.0_0
456:debug:main epoch: in tree: 0 installed: 0
457:debug:main docbook-xsl 1.75.2_0 exists in the ports tree
458:debug:main docbook-xsl 1.75.2_0  is the latest installed
459:debug:main docbook-xsl 1.75.2_0  is active
460:debug:main Merging existing variants '' into variants
461:debug:main new fully merged portvariants:
462:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xsl
463:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
464:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
465:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
466:debug:main universal_variant is false, so not adding the default universal variant
467:debug:main No need to upgrade! docbook-xsl 1.75.2_0 >= docbook-xsl 1.75.2_0
468:debug:main epoch: in tree: 0 installed: 0
469:debug:main xmlcatmgr 2.2_1 exists in the ports tree
470:debug:main xmlcatmgr 2.2_1  is the latest installed
471:debug:main xmlcatmgr 2.2_1  is active
472:debug:main Merging existing variants '' into variants
473:debug:main new fully merged portvariants:
474:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/xmlcatmgr
475:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
476:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
477:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
478:debug:main adding the default universal variant
479:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
480:debug:main No need to upgrade! xmlcatmgr 2.2_1 >= xmlcatmgr 2.2_1
481:debug:main epoch: in tree: 0 installed: 0
482:debug:main iso-codes 3.17_0 exists in the ports tree
483:debug:main iso-codes 3.17_0  is the latest installed
484:debug:main iso-codes 3.17_0  is active
485:debug:main Merging existing variants '' into variants
486:debug:main new fully merged portvariants:
487:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/iso-codes
488:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
489:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
490:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
491:debug:main only one arch supported, so not adding the default universal variant
492:debug:main No need to upgrade! iso-codes 3.17_0 >= iso-codes 3.17_0
493:debug:main epoch: in tree: 0 installed: 0
494:debug:main py26-libxml2 2.6.21_0 exists in the ports tree
495:debug:main py26-libxml2 2.6.21_0  is the latest installed
496:debug:main py26-libxml2 2.6.21_0  is active
497:debug:main Merging existing variants '' into variants
498:debug:main new fully merged portvariants:
499:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-libxml2
500:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
501:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
502:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
503:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl
504:debug:main adding the default universal variant
505:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
506:debug:main No need to upgrade! py26-libxml2 2.6.21_0 >= py26-libxml2 2.6.21_0
507:debug:main epoch: in tree: 0 installed: 0
508:debug:main pkgconfig 0.25_0 exists in the ports tree
509:debug:main pkgconfig 0.25_0  is the latest installed
510:debug:main pkgconfig 0.25_0  is active
511:debug:main Merging existing variants '' into variants
512:debug:main new fully merged portvariants:
513:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
514:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
515:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
516:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
517:debug:main adding the default universal variant
518:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
519:debug:main No need to upgrade! pkgconfig 0.25_0 >= pkgconfig 0.25_0
520:debug:main epoch: in tree: 0 installed: 0
521:debug:main glib2 2.24.1_0 exists in the ports tree
522:debug:main glib2 2.24.1_0  is the latest installed
523:debug:main glib2 2.24.1_0  is active
524:debug:main Merging existing variants '' into variants
525:debug:main new fully merged portvariants:
526:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/glib2
527:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
528:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
529:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
530:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
531:debug:main adding the default universal variant
532:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
533:debug:main No need to upgrade! glib2 2.24.1_0 >= glib2 2.24.1_0
534:debug:main epoch: in tree: 0 installed: 0
535:debug:main perl5 5.8.9_0 exists in the ports tree
536:debug:main perl5 5.8.9_0  is the latest installed
537:debug:main perl5 5.8.9_0  is active
538:debug:main Merging existing variants '' into variants
539:debug:main new fully merged portvariants:
540:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
541:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
542:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
543:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
544:debug:main universal_variant is false, so not adding the default universal variant
545:debug:main No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0
546:debug:main epoch: in tree: 0 installed: 0
547:debug:main perl5.8 5.8.9_3 exists in the ports tree
548:debug:main perl5.8 5.8.9_3  is the latest installed
549:debug:main perl5.8 5.8.9_3  is active
550:debug:main Merging existing variants '' into variants
551:debug:main new fully merged portvariants:
552:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
553:debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386
554:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
555:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
556:debug:main adding the default universal variant
557:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
558:debug:main No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3
559:debug:main Found Dependency: path: /usr/bin filename: python regex: ^python$
560:debug:main python_select is *not* installed by MacPorts
561:debug:main Searching for dependency: python_select
562:debug:main Didn't find receipt, going to depspec regex for: python_select
563:debug:main Found Dependency: path: /usr/bin filename: python regex: ^python$
564:debug:main python_select not installed, soft dependency satisfied
565:msg:main --->  Computing dependencies for gtk-doc:info:main .:debug:main Searching for dependency: rarian
566:debug:main Found Dependency: receipt exists for rarian
567:debug:main Searching for dependency: gnome-doc-utils
568:debug:main Found Dependency: receipt exists for gnome-doc-utils
569:debug:main Searching for dependency: pkgconfig
570:debug:main Found Dependency: receipt exists for pkgconfig
571:debug:main Searching for dependency: docbook-xml
572:debug:main Found Dependency: receipt exists for docbook-xml
573:debug:main Searching for dependency: docbook-xsl
574:debug:main Found Dependency: receipt exists for docbook-xsl
575:debug:main Searching for dependency: libxml2
576:debug:main Found Dependency: receipt exists for libxml2
577:debug:main Searching for dependency: glib2
578:debug:main Found Dependency: receipt exists for glib2
579:debug:main Searching for dependency: perl5
580:debug:main Found Dependency: receipt exists for perl5
581:msg:main
582:debug:main Executing org.macports.main (gtk-doc)
583:debug:main Skipping completed org.macports.fetch (gtk-doc)
584:debug:main Skipping completed org.macports.checksum (gtk-doc)
585:debug:main setting option extract.cmd to /usr/bin/bzip2
586:debug:main Skipping completed org.macports.extract (gtk-doc)
587:debug:main Skipping completed org.macports.patch (gtk-doc)
588:msg:main --->  Configuring gtk-doc
589:debug:main Using compiler 'Mac OS X gcc 4.0'
590:debug:configure configure phase started at Tue Jun 22 19:21:23 PDT 2010
591:debug:configure Executing org.macports.configure (gtk-doc)
592:debug:configure Environment: CPATH='/opt/local/include' CFLAGS='-O2 -arch i386' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-O2 -arch i386' LIBRARY_PATH='/opt/local/lib' MACOSX_DEPLOYMENT_TARGET='10.5' PERL='/opt/local/bin/perl' CXX='/usr/bin/g++-4.0' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_gtk-doc/work/.CC_PRINT_OPTIONS' F90FLAGS='-O2 -m32' LDFLAGS='-L/opt/local/lib -arch i386' OBJC='/usr/bin/gcc-4.0' FCFLAGS='-O2 -m32' INSTALL='/usr/bin/install -c' PYTHON='/opt/local/bin/python2.6' OBJCFLAGS='-O2 -arch i386' FFLAGS='-O2 -m32' CC_PRINT_OPTIONS='YES' CC='/usr/bin/gcc-4.0'
593:debug:configure Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_gtk-doc/work/gtk-doc-1.15" && ./configure --prefix=/opt/local --with-xml-catalog=/opt/local/etc/xml/catalog'
594:info:configure checking for a BSD-compatible install... /usr/bin/install -c
595:info:configure checking whether build environment is sane... yes
596:info:configure checking for a thread-safe mkdir -p... /opt/local/bin/gmkdir -p
597:info:configure checking for gawk... no
598:info:configure checking for mawk... no
599:info:configure checking for nawk... no
600:info:configure checking for awk... awk
601:info:configure checking whether make sets $(MAKE)... yes
602:info:configure checking whether to enable maintainer-specific portions of Makefiles... no
603:info:configure checking whether ln -s works... yes
604:info:configure checking for pkg-config... /opt/local/bin/pkg-config
605:info:configure checking pkg-config is at least version 0.9.0... yes
606:info:configure checking gnome-doc-utils >= 0.3.2... yes
607:info:configure checking for style of include used by make... GNU
608:info:configure checking for gcc... /usr/bin/gcc-4.0
609:info:configure checking for C compiler default output file name... a.out
610:info:configure checking whether the C compiler works... yes
611:info:configure checking whether we are cross compiling... no
612:info:configure checking for suffix of executables...
613:info:configure checking for suffix of object files... o
614:info:configure checking whether we are using the GNU C compiler... yes
615:info:configure checking whether /usr/bin/gcc-4.0 accepts -g... yes
616:info:configure checking for /usr/bin/gcc-4.0 option to accept ISO C89... none needed
617:info:configure checking dependency style of /usr/bin/gcc-4.0... gcc3
618:info:configure checking for library containing strerror... none required
619:info:configure checking for gcc... (cached) /usr/bin/gcc-4.0
620:info:configure checking whether we are using the GNU C compiler... (cached) yes
621:info:configure checking whether /usr/bin/gcc-4.0 accepts -g... (cached) yes
622:info:configure checking for /usr/bin/gcc-4.0 option to accept ISO C89... (cached) none needed
623:info:configure checking dependency style of /usr/bin/gcc-4.0... (cached) gcc3
624:info:configure checking build system type... i386-apple-darwin9.8.0
625:info:configure checking host system type... i386-apple-darwin9.8.0
626:info:configure checking for a sed that does not truncate output... /usr/bin/sed
627:info:configure checking for grep that handles long lines and -e... /usr/bin/grep
628:info:configure checking for egrep... /usr/bin/grep -E
629:info:configure checking for fgrep... /usr/bin/grep -F
630:info:configure checking for ld used by /usr/bin/gcc-4.0... /usr/libexec/gcc/i686-apple-darwin9/4.0.1/ld
631:info:configure checking if the linker (/usr/libexec/gcc/i686-apple-darwin9/4.0.1/ld) is GNU ld... no
632:info:configure checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -p
633:info:configure checking the name lister (/usr/bin/nm -p) interface... BSD nm
634:info:configure checking the maximum length of command line arguments... 196608
635:info:configure checking whether the shell understands some XSI constructs... yes
636:info:configure checking whether the shell understands "+="... yes
637:info:configure checking for /usr/libexec/gcc/i686-apple-darwin9/4.0.1/ld option to reload object files... -r
638:info:configure checking for objdump... no
639:info:configure checking how to recognize dependent libraries... pass_all
640:info:configure checking for ar... ar
641:info:configure checking for strip... strip
642:info:configure checking for ranlib... ranlib
643:info:configure checking command to parse /usr/bin/nm -p output from /usr/bin/gcc-4.0 object... ok
644:info:configure checking for dsymutil... dsymutil
645:info:configure checking for nmedit... nmedit
646:info:configure checking for lipo... lipo
647:info:configure checking for otool... otool
648:info:configure checking for otool64... no
649:info:configure checking for -single_module linker flag... yes
650:info:configure checking for -exported_symbols_list linker flag... yes
651:info:configure checking how to run the C preprocessor... /usr/bin/gcc-4.0 -E
652:info:configure checking for ANSI C header files... yes
653:info:configure checking for sys/types.h... yes
654:info:configure checking for sys/stat.h... yes
655:info:configure checking for stdlib.h... yes
656:info:configure checking for string.h... yes
657:info:configure checking for memory.h... yes
658:info:configure checking for strings.h... yes
659:info:configure checking for inttypes.h... yes
660:info:configure checking for stdint.h... yes
661:info:configure checking for unistd.h... yes
662:info:configure checking for dlfcn.h... yes
663:info:configure checking for objdir... .libs
664:info:configure checking if /usr/bin/gcc-4.0 supports -fno-rtti -fno-exceptions... no
665:info:configure checking for /usr/bin/gcc-4.0 option to produce PIC... -fno-common -DPIC
666:info:configure checking if /usr/bin/gcc-4.0 PIC flag -fno-common -DPIC works... yes
667:info:configure checking if /usr/bin/gcc-4.0 static flag -static works... no
668:info:configure checking if /usr/bin/gcc-4.0 supports -c -o file.o... yes
669:info:configure checking if /usr/bin/gcc-4.0 supports -c -o file.o... (cached) yes
670:info:configure checking whether the /usr/bin/gcc-4.0 linker (/usr/libexec/gcc/i686-apple-darwin9/4.0.1/ld) supports shared libraries... yes
671:info:configure checking dynamic linker characteristics... darwin9.8.0 dyld
672:info:configure checking how to hardcode library paths into programs... immediate
673:info:configure checking whether stripping libraries is possible... yes
674:info:configure checking if libtool supports shared libraries... yes
675:info:configure checking whether to build shared libraries... yes
676:info:configure checking whether to build static libraries... yes
677:info:configure checking for pkg-config... (cached) /opt/local/bin/pkg-config
678:info:configure checking pkg-config is at least version 0.19... yes
679:info:configure checking for perl... /opt/local/bin/perl
680:info:configure checking if Perl version >= 5.6.0... yes
681:info:configure checking whether /opt/local/bin/python2.6 version >= 2.3... yes
682:info:configure checking for /opt/local/bin/python2.6 version... 2.6
683:info:configure checking for /opt/local/bin/python2.6 platform... darwin
684:info:configure checking for /opt/local/bin/python2.6 script directory... ${prefix}/lib/python2.6/site-packages
685:info:configure checking for /opt/local/bin/python2.6 extension module directory... ${exec_prefix}/lib/python2.6/site-packages
686:info:configure checking for openjade... no
687:info:configure checking for jade... no
688:info:configure configure: WARNING: Could not find openjade or jade, so SGML is not supported
689:info:configure checking for xsltproc... /opt/local/bin/xsltproc
690:info:configure checking for dblatex... no
691:info:configure checking for fop... no
692:info:configure configure: WARNING: neither dblatex nor fop found, so no pdf output from xml
693:info:configure checking for XML catalog (/opt/local/etc/xml/catalog)... found
694:info:configure checking for xmlcatalog... /opt/local/bin/xmlcatalog
695:info:configure checking for DocBook XML DTD V4.3 in XML catalog... not found
696:info:configure configure: error: could not find DocBook XML DTD V4.3 in XML catalog
697:info:configure shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_gtk-doc/work/gtk-doc-1.15" && ./configure --prefix=/opt/local --with-xml-catalog=/opt/local/etc/xml/catalog " returned error 1
698:error:configure Target org.macports.configure returned: configure failure: shell command failed
699:debug:configure Backtrace: configure failure: shell command failed
700    while executing
701"$procedure $targetname"
702:info:configure Warning: the following items did not execute (for gtk-doc): org.macports.activate org.macports.configure org.macports.build org.macports.destroot org.macports.install
703:notice:configure Log for gtk-doc is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_gtk-doc/main.log