| 1 | version:1 |
|---|
| 2 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 3 | :debug:main expat 2.0.1_0 exists in the ports tree |
|---|
| 4 | :debug:main expat 2.0.1_0 is the latest installed |
|---|
| 5 | :debug:main expat 2.0.1_0 is active |
|---|
| 6 | :debug:main Merging existing variants '' into variants |
|---|
| 7 | :debug:main new fully merged portvariants: |
|---|
| 8 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat |
|---|
| 9 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 10 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 11 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 12 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 13 | :debug:main adding the default universal variant |
|---|
| 14 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 15 | :debug:main No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0 |
|---|
| 16 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 17 | :debug:main fontconfig 2.8.0_0 exists in the ports tree |
|---|
| 18 | :debug:main fontconfig 2.8.0_0 is the latest installed |
|---|
| 19 | :debug:main fontconfig 2.8.0_0 is active |
|---|
| 20 | :debug:main Merging existing variants '' into variants |
|---|
| 21 | :debug:main new fully merged portvariants: |
|---|
| 22 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig |
|---|
| 23 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 24 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 25 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 26 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 27 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 28 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 29 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 30 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 31 | :debug:main No need to upgrade! fontconfig 2.8.0_0 >= fontconfig 2.8.0_0 |
|---|
| 32 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 33 | :debug:main libiconv 1.13.1_0 exists in the ports tree |
|---|
| 34 | :debug:main libiconv 1.13.1_0 is the latest installed |
|---|
| 35 | :debug:main libiconv 1.13.1_0 is active |
|---|
| 36 | :debug:main Merging existing variants '' into variants |
|---|
| 37 | :debug:main new fully merged portvariants: |
|---|
| 38 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv |
|---|
| 39 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 40 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 41 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 42 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 43 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 44 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 45 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 46 | :debug:main No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0 |
|---|
| 47 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 48 | :debug:main freetype 2.4.1_0 exists in the ports tree |
|---|
| 49 | :debug:main freetype 2.4.1_0 is the latest installed |
|---|
| 50 | :debug:main freetype 2.4.1_0 is active |
|---|
| 51 | :debug:main Merging existing variants '' into variants |
|---|
| 52 | :debug:main new fully merged portvariants: |
|---|
| 53 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype |
|---|
| 54 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 55 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 56 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 57 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 58 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 59 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 60 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 61 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 62 | :debug:main No need to upgrade! freetype 2.4.1_0 >= freetype 2.4.1_0 |
|---|
| 63 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 64 | :debug:main zlib 1.2.5_0 exists in the ports tree |
|---|
| 65 | :debug:main zlib 1.2.5_0 is the latest installed |
|---|
| 66 | :debug:main zlib 1.2.5_0 is active |
|---|
| 67 | :debug:main Merging existing variants '' into variants |
|---|
| 68 | :debug:main new fully merged portvariants: |
|---|
| 69 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib |
|---|
| 70 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 71 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 72 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 73 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 74 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl |
|---|
| 75 | :debug:main adding the default universal variant |
|---|
| 76 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 77 | :debug:main No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0 |
|---|
| 78 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 79 | :debug:main gd2 2.0.35_7 exists in the ports tree |
|---|
| 80 | :debug:main gd2 2.0.35_7 is the latest installed |
|---|
| 81 | :debug:main gd2 2.0.35_7 is active |
|---|
| 82 | :debug:main Merging existing variants '' into variants |
|---|
| 83 | :debug:main new fully merged portvariants: |
|---|
| 84 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/gd2 |
|---|
| 85 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 86 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 87 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 88 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 89 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 90 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 91 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 92 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 93 | :debug:main No need to upgrade! gd2 2.0.35_7 >= gd2 2.0.35_7 |
|---|
| 94 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 95 | :debug:main libpng 1.2.44_0 exists in the ports tree |
|---|
| 96 | :debug:main libpng 1.2.44_0 is the latest installed |
|---|
| 97 | :debug:main libpng 1.2.44_0 is active |
|---|
| 98 | :debug:main Merging existing variants '' into variants |
|---|
| 99 | :debug:main new fully merged portvariants: |
|---|
| 100 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng |
|---|
| 101 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 102 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 103 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 104 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 105 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 106 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 107 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 108 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 109 | :debug:main No need to upgrade! libpng 1.2.44_0 >= libpng 1.2.44_0 |
|---|
| 110 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 111 | :debug:main jpeg 8b_0 exists in the ports tree |
|---|
| 112 | :debug:main jpeg 8b_0 is the latest installed |
|---|
| 113 | :debug:main jpeg 8b_0 is active |
|---|
| 114 | :debug:main Merging existing variants '' into variants |
|---|
| 115 | :debug:main new fully merged portvariants: |
|---|
| 116 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg |
|---|
| 117 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 118 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 119 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 120 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 121 | :debug:main adding the default universal variant |
|---|
| 122 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 123 | :debug:main No need to upgrade! jpeg 8b_0 >= jpeg 8b_0 |
|---|
| 124 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 125 | :debug:main xpm 3.5.8_0 exists in the ports tree |
|---|
| 126 | :debug:main xpm 3.5.8_0 is the latest installed |
|---|
| 127 | :debug:main xpm 3.5.8_0 is active |
|---|
| 128 | :debug:main Merging existing variants '' into variants |
|---|
| 129 | :debug:main new fully merged portvariants: |
|---|
| 130 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xpm |
|---|
| 131 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 132 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 133 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 134 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 135 | :debug:main adding the default universal variant |
|---|
| 136 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 137 | :debug:main No need to upgrade! xpm 3.5.8_0 >= xpm 3.5.8_0 |
|---|
| 138 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 139 | :debug:main xorg-libXt 1.0.8_0 exists in the ports tree |
|---|
| 140 | :debug:main xorg-libXt 1.0.8_0 is the latest installed |
|---|
| 141 | :debug:main xorg-libXt 1.0.8_0 is active |
|---|
| 142 | :debug:main Merging existing variants '' into variants |
|---|
| 143 | :debug:main new fully merged portvariants: |
|---|
| 144 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXt |
|---|
| 145 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 146 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 147 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 148 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 149 | :debug:main adding the default universal variant |
|---|
| 150 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 151 | :debug:main No need to upgrade! xorg-libXt 1.0.8_0 >= xorg-libXt 1.0.8_0 |
|---|
| 152 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 153 | :debug:main xorg-libsm 1.1.1_0 exists in the ports tree |
|---|
| 154 | :debug:main xorg-libsm 1.1.1_0 is the latest installed |
|---|
| 155 | :debug:main xorg-libsm 1.1.1_0 is active |
|---|
| 156 | :debug:main Merging existing variants '' into variants |
|---|
| 157 | :debug:main new fully merged portvariants: |
|---|
| 158 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libsm |
|---|
| 159 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 160 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 161 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 162 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 163 | :debug:main adding the default universal variant |
|---|
| 164 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 165 | :debug:main No need to upgrade! xorg-libsm 1.1.1_0 >= xorg-libsm 1.1.1_0 |
|---|
| 166 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 167 | :debug:main xorg-libice 1.0.6_0 exists in the ports tree |
|---|
| 168 | :debug:main xorg-libice 1.0.6_0 is the latest installed |
|---|
| 169 | :debug:main xorg-libice 1.0.6_0 is active |
|---|
| 170 | :debug:main Merging existing variants '' into variants |
|---|
| 171 | :debug:main new fully merged portvariants: |
|---|
| 172 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libice |
|---|
| 173 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 174 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 175 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 176 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 177 | :debug:main adding the default universal variant |
|---|
| 178 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 179 | :debug:main No need to upgrade! xorg-libice 1.0.6_0 >= xorg-libice 1.0.6_0 |
|---|
| 180 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 181 | :debug:main xorg-xproto 7.0.17_0 exists in the ports tree |
|---|
| 182 | :debug:main xorg-xproto 7.0.17_0 is the latest installed |
|---|
| 183 | :debug:main xorg-xproto 7.0.17_0 is active |
|---|
| 184 | :debug:main Merging existing variants '' into variants |
|---|
| 185 | :debug:main new fully merged portvariants: |
|---|
| 186 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto |
|---|
| 187 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 188 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 189 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 190 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 191 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 192 | :debug:main No need to upgrade! xorg-xproto 7.0.17_0 >= xorg-xproto 7.0.17_0 |
|---|
| 193 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 194 | :debug:main xorg-libX11 1.3.4_0 exists in the ports tree |
|---|
| 195 | :debug:main xorg-libX11 1.3.4_0 is the latest installed |
|---|
| 196 | :debug:main xorg-libX11 1.3.4_0 is active |
|---|
| 197 | :debug:main Merging existing variants '' into variants |
|---|
| 198 | :debug:main new fully merged portvariants: |
|---|
| 199 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11 |
|---|
| 200 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 201 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 202 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 203 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 204 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 205 | :debug:main adding the default universal variant |
|---|
| 206 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 207 | :debug:main No need to upgrade! xorg-libX11 1.3.4_0 >= xorg-libX11 1.3.4_0 |
|---|
| 208 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 209 | :debug:main xorg-libXdmcp 1.0.3_0 exists in the ports tree |
|---|
| 210 | :debug:main xorg-libXdmcp 1.0.3_0 is the latest installed |
|---|
| 211 | :debug:main xorg-libXdmcp 1.0.3_0 is active |
|---|
| 212 | :debug:main Merging existing variants '' into variants |
|---|
| 213 | :debug:main new fully merged portvariants: |
|---|
| 214 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp |
|---|
| 215 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 216 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 217 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 218 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 219 | :debug:main adding the default universal variant |
|---|
| 220 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 221 | :debug:main No need to upgrade! xorg-libXdmcp 1.0.3_0 >= xorg-libXdmcp 1.0.3_0 |
|---|
| 222 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 223 | :debug:main xorg-libXau 1.0.6_0 exists in the ports tree |
|---|
| 224 | :debug:main xorg-libXau 1.0.6_0 is the latest installed |
|---|
| 225 | :debug:main xorg-libXau 1.0.6_0 is active |
|---|
| 226 | :debug:main Merging existing variants '' into variants |
|---|
| 227 | :debug:main new fully merged portvariants: |
|---|
| 228 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau |
|---|
| 229 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 230 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 231 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 232 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 233 | :debug:main adding the default universal variant |
|---|
| 234 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 235 | :debug:main No need to upgrade! xorg-libXau 1.0.6_0 >= xorg-libXau 1.0.6_0 |
|---|
| 236 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 237 | :debug:main xorg-kbproto 1.0.4_0 exists in the ports tree |
|---|
| 238 | :debug:main xorg-kbproto 1.0.4_0 is the latest installed |
|---|
| 239 | :debug:main xorg-kbproto 1.0.4_0 is active |
|---|
| 240 | :debug:main Merging existing variants '' into variants |
|---|
| 241 | :debug:main new fully merged portvariants: |
|---|
| 242 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto |
|---|
| 243 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 244 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 245 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 246 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 247 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 248 | :debug:main No need to upgrade! xorg-kbproto 1.0.4_0 >= xorg-kbproto 1.0.4_0 |
|---|
| 249 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 250 | :debug:main xorg-libXext 1.1.2_0 exists in the ports tree |
|---|
| 251 | :debug:main xorg-libXext 1.1.2_0 is the latest installed |
|---|
| 252 | :debug:main xorg-libXext 1.1.2_0 is active |
|---|
| 253 | :debug:main Merging existing variants '' into variants |
|---|
| 254 | :debug:main new fully merged portvariants: |
|---|
| 255 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXext |
|---|
| 256 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 257 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 258 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 259 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 260 | :debug:main adding the default universal variant |
|---|
| 261 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 262 | :debug:main No need to upgrade! xorg-libXext 1.1.2_0 >= xorg-libXext 1.1.2_0 |
|---|
| 263 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 264 | :debug:main xorg-xextproto 7.1.1_0 exists in the ports tree |
|---|
| 265 | :debug:main xorg-xextproto 7.1.1_0 is the latest installed |
|---|
| 266 | :debug:main xorg-xextproto 7.1.1_0 is active |
|---|
| 267 | :debug:main Merging existing variants '' into variants |
|---|
| 268 | :debug:main new fully merged portvariants: |
|---|
| 269 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto |
|---|
| 270 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 271 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 272 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 273 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 274 | :debug:main only one arch supported, so not adding the default universal variant |
|---|
| 275 | :debug:main No need to upgrade! xorg-xextproto 7.1.1_0 >= xorg-xextproto 7.1.1_0 |
|---|
| 276 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 277 | :debug:main gettext 0.18.1.1_2 exists in the ports tree |
|---|
| 278 | :debug:main gettext 0.18.1.1_2 is the latest installed |
|---|
| 279 | :debug:main gettext 0.18.1.1_2 is active |
|---|
| 280 | :debug:main Merging existing variants '' into variants |
|---|
| 281 | :debug:main new fully merged portvariants: |
|---|
| 282 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext |
|---|
| 283 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 284 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 285 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 286 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 287 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 288 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 289 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
|---|
| 290 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 291 | :debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2 |
|---|
| 292 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 293 | :debug:main ncurses 5.7_0 exists in the ports tree |
|---|
| 294 | :debug:main ncurses 5.7_0 is the latest installed |
|---|
| 295 | :debug:main ncurses 5.7_0 is active |
|---|
| 296 | :debug:main Merging existing variants '' into variants |
|---|
| 297 | :debug:main new fully merged portvariants: |
|---|
| 298 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses |
|---|
| 299 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 300 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 301 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 302 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 303 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 304 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 305 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 306 | :debug:main No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0 |
|---|
| 307 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 308 | :debug:main ncursesw 5.7_0 exists in the ports tree |
|---|
| 309 | :debug:main ncursesw 5.7_0 is the latest installed |
|---|
| 310 | :debug:main ncursesw 5.7_0 is active |
|---|
| 311 | :debug:main Merging existing variants '' into variants |
|---|
| 312 | :debug:main new fully merged portvariants: |
|---|
| 313 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw |
|---|
| 314 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 315 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 316 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 317 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 318 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 319 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 320 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 321 | :debug:main No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0 |
|---|
| 322 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 323 | :debug:main pdflib 7.0.5_0 exists in the ports tree |
|---|
| 324 | :debug:main pdflib 7.0.5_0 is the latest installed |
|---|
| 325 | :debug:main pdflib 7.0.5_0 is active |
|---|
| 326 | :debug:main Merging existing variants '' into variants |
|---|
| 327 | :debug:main new fully merged portvariants: |
|---|
| 328 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/pdflib |
|---|
| 329 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 330 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 331 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 332 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 333 | :debug:main adding the default universal variant |
|---|
| 334 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 335 | :debug:main No need to upgrade! pdflib 7.0.5_0 >= pdflib 7.0.5_0 |
|---|
| 336 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 337 | :debug:main readline 6.1.000_1 exists in the ports tree |
|---|
| 338 | :debug:main readline 6.1.000_1 is the latest installed |
|---|
| 339 | :debug:main readline 6.1.000_1 is active |
|---|
| 340 | :debug:main Merging existing variants '' into variants |
|---|
| 341 | :debug:main new fully merged portvariants: |
|---|
| 342 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline |
|---|
| 343 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 344 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 345 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 346 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 347 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
|---|
| 348 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 349 | :debug:main universal variant already exists, so not adding the default one |
|---|
| 350 | :debug:main No need to upgrade! readline 6.1.000_1 >= readline 6.1.000_1 |
|---|
| 351 | :debug:main epoch: in tree: 0 installed: 0 |
|---|
| 352 | :debug:main aquaterm 1.0.1_5 exists in the ports tree |
|---|
| 353 | :debug:main aquaterm 1.0.1_5 is the latest installed |
|---|
| 354 | :debug:main aquaterm 1.0.1_5 is active |
|---|
| 355 | :debug:main Merging existing variants '' into variants |
|---|
| 356 | :debug:main new fully merged portvariants: |
|---|
| 357 | :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/aqua/aquaterm |
|---|
| 358 | :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 |
|---|
| 359 | :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
|---|
| 360 | :debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
|---|
| 361 | :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
|---|
| 362 | :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcode-1.0.tcl |
|---|
| 363 | :debug:main Re-registering default for use_configure |
|---|
| 364 | :debug:main Re-registering default for universal_variant |
|---|
| 365 | :debug:main Re-registering default for build.pre_args |
|---|
| 366 | :debug:main Re-registering default for build.target |
|---|
| 367 | :debug:main Re-registering default for destroot.pre_args |
|---|
| 368 | :debug:main Re-registering default for destroot.target |
|---|
| 369 | :debug:main Re-registering default for destroot.destdir |
|---|
| 370 | :debug:main adding the default universal variant |
|---|
| 371 | :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
|---|
| 372 | :debug:main No need to upgrade! aquaterm 1.0.1_5 >= aquaterm 1.0.1_5 |
|---|
| 373 | :msg:main ---> Computing dependencies for gnuplot:msg:main |
|---|
| 374 | :debug:main Searching for dependency: expat |
|---|
| 375 | :debug:main Found Dependency: receipt exists for expat |
|---|
| 376 | :debug:main Searching for dependency: fontconfig |
|---|
| 377 | :debug:main Found Dependency: receipt exists for fontconfig |
|---|
| 378 | :debug:main Searching for dependency: gd2 |
|---|
| 379 | :debug:main Found Dependency: receipt exists for gd2 |
|---|
| 380 | :debug:main Searching for dependency: jpeg |
|---|
| 381 | :debug:main Found Dependency: receipt exists for jpeg |
|---|
| 382 | :debug:main Searching for dependency: pdflib |
|---|
| 383 | :debug:main Found Dependency: receipt exists for pdflib |
|---|
| 384 | :debug:main Searching for dependency: libiconv |
|---|
| 385 | :debug:main Found Dependency: receipt exists for libiconv |
|---|
| 386 | :debug:main Searching for dependency: libpng |
|---|
| 387 | :debug:main Found Dependency: receipt exists for libpng |
|---|
| 388 | :debug:main Searching for dependency: ncurses |
|---|
| 389 | :debug:main Found Dependency: receipt exists for ncurses |
|---|
| 390 | :debug:main Searching for dependency: readline |
|---|
| 391 | :debug:main Found Dependency: receipt exists for readline |
|---|
| 392 | :debug:main Searching for dependency: xpm |
|---|
| 393 | :debug:main Found Dependency: receipt exists for xpm |
|---|
| 394 | :debug:main Searching for dependency: zlib |
|---|
| 395 | :debug:main Found Dependency: receipt exists for zlib |
|---|
| 396 | :debug:main Searching for dependency: aquaterm |
|---|
| 397 | :debug:main Found Dependency: receipt exists for aquaterm |
|---|
| 398 | :debug:main Executing org.macports.main (gnuplot) |
|---|
| 399 | :debug:main Skipping completed org.macports.fetch (gnuplot) |
|---|
| 400 | :debug:main Skipping completed org.macports.checksum (gnuplot) |
|---|
| 401 | :debug:main Skipping completed org.macports.extract (gnuplot) |
|---|
| 402 | :debug:main Skipping completed org.macports.patch (gnuplot) |
|---|
| 403 | :debug:main Skipping completed org.macports.configure (gnuplot) |
|---|
| 404 | :debug:main Skipping completed org.macports.build (gnuplot) |
|---|
| 405 | :msg:main ---> Staging gnuplot into destroot |
|---|
| 406 | :info:main . missing (directory not created: File exists) |
|---|
| 407 | :info:main ./Applications missing (directory not created: File exists) |
|---|
| 408 | :info:main ./Developer missing (directory not created: File exists) |
|---|
| 409 | :info:main ./Library missing (directory not created: File exists) |
|---|
| 410 | :debug:destroot destroot phase started at Tue Aug 3 10:06:13 PDT 2010 |
|---|
| 411 | :debug:destroot Executing org.macports.destroot (gnuplot) |
|---|
| 412 | :debug:destroot Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6' |
|---|
| 413 | :debug:destroot Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/gnuplot-4.4.0" && /usr/bin/make install prefix=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local' |
|---|
| 414 | :info:destroot Making install in config |
|---|
| 415 | :info:destroot make[2]: Nothing to be done for `install-exec-am'. |
|---|
| 416 | :info:destroot make[2]: Nothing to be done for `install-data-am'. |
|---|
| 417 | :info:destroot Making install in m4 |
|---|
| 418 | :info:destroot make[2]: Nothing to be done for `install-exec-am'. |
|---|
| 419 | :info:destroot make[2]: Nothing to be done for `install-data-am'. |
|---|
| 420 | :info:destroot Making install in term |
|---|
| 421 | :info:destroot make[2]: Nothing to be done for `install-exec-am'. |
|---|
| 422 | :info:destroot test -z "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/share/gnuplot/4.4/js" || /opt/local/bin/gmkdir -p "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/share/gnuplot/4.4/js" |
|---|
| 423 | :info:destroot /usr/bin/install -c -m 644 js/canvasmath.js js/canvastext.js js/gnuplot_common.js js/gnuplot_mouse.js js/grid.png js/help.png js/nextzoom.png js/previouszoom.png js/textzoom.png js/gnuplot_mouse.css js/README '/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/share/gnuplot/4.4/js' |
|---|
| 424 | :info:destroot test -z "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/share/gnuplot/4.4/lua" || /opt/local/bin/gmkdir -p "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/share/gnuplot/4.4/lua" |
|---|
| 425 | :info:destroot /usr/bin/install -c -m 644 lua/gnuplot-tikz.lua '/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/share/gnuplot/4.4/lua' |
|---|
| 426 | :info:destroot test -z "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/share/gnuplot/4.4/PostScript" || /opt/local/bin/gmkdir -p "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/share/gnuplot/4.4/PostScript" |
|---|
| 427 | :info:destroot /usr/bin/install -c -m 644 PostScript/8859-15.ps PostScript/8859-1.ps PostScript/8859-2.ps PostScript/8859-9.ps PostScript/cp1250.ps PostScript/cp437.ps PostScript/cp850.ps PostScript/cp852.ps PostScript/koi8r.ps PostScript/koi8u.ps PostScript/prologue.ps PostScript/utf-8.ps PostScript/aglfn.txt '/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/share/gnuplot/4.4/PostScript' |
|---|
| 428 | :info:destroot Making install in src |
|---|
| 429 | :info:destroot Making install in wxterminal |
|---|
| 430 | :info:destroot make[3]: Nothing to be done for `install-exec-am'. |
|---|
| 431 | :info:destroot make[3]: Nothing to be done for `install-data-am'. |
|---|
| 432 | :info:destroot test -z "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/bin" || /opt/local/bin/gmkdir -p "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/bin" |
|---|
| 433 | :info:destroot /usr/bin/install -c gnuplot '/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/bin' |
|---|
| 434 | :info:destroot test -z "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/libexec/gnuplot/4.4" || /opt/local/bin/gmkdir -p "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/libexec/gnuplot/4.4" |
|---|
| 435 | :info:destroot /usr/bin/install -c gnuplot_x11 '/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/libexec/gnuplot/4.4' |
|---|
| 436 | :info:destroot make[3]: Nothing to be done for `install-data-am'. |
|---|
| 437 | :info:destroot Making install in docs |
|---|
| 438 | :info:destroot ../mkinstalldirs /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/share/gnuplot/4.4 |
|---|
| 439 | :info:destroot /usr/bin/install -c -m 644 gnuplot.gih /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/share/gnuplot/4.4/gnuplot.gih |
|---|
| 440 | :info:destroot ../mkinstalldirs /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/share/info |
|---|
| 441 | :info:destroot /usr/bin/install -c -m 644 gnuplot.info /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/share/info/gnuplot.info |
|---|
| 442 | :info:destroot install-info --info-dir=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/share/info /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/share/info/gnuplot.info |
|---|
| 443 | :info:destroot Making install in lisp |
|---|
| 444 | :info:destroot make[2]: Nothing to be done for `install-exec-am'. |
|---|
| 445 | :info:destroot /usr/bin/make install-data-hook |
|---|
| 446 | :info:destroot /bin/sh ./../mkinstalldirs /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/share/emacs/site-lisp |
|---|
| 447 | :info:destroot /usr/bin/install -c -m 644 gnuplot-gui.el /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/share/emacs/site-lisp/gnuplot-gui.el |
|---|
| 448 | :info:destroot /usr/bin/install -c -m 644 gnuplot.el /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/share/emacs/site-lisp/gnuplot.el |
|---|
| 449 | :info:destroot /usr/bin/install -c -m 644 info-look.20.2.el /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/share/emacs/site-lisp/info-look.20.2.el |
|---|
| 450 | :info:destroot /usr/bin/install -c -m 644 info-look.20.3.el /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/share/emacs/site-lisp/info-look.20.3.el |
|---|
| 451 | :info:destroot /bin/sh ./../mkinstalldirs /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/share/emacs/site-lisp |
|---|
| 452 | :info:destroot /usr/bin/install -c -m 644 gnuplot.elc /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/share/emacs/site-lisp/gnuplot.elc |
|---|
| 453 | :info:destroot /usr/bin/install -c -m 644 gnuplot-gui.elc /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/share/emacs/site-lisp/gnuplot-gui.elc |
|---|
| 454 | :info:destroot Making install in man |
|---|
| 455 | :info:destroot make[2]: Nothing to be done for `install-exec-am'. |
|---|
| 456 | :info:destroot test -z "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/share/man/man1" || /opt/local/bin/gmkdir -p "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/share/man/man1" |
|---|
| 457 | :info:destroot /usr/bin/install -c -m 644 gnuplot.1 '/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/share/man/man1' |
|---|
| 458 | :info:destroot /usr/bin/make install-data-hook |
|---|
| 459 | :info:destroot make[3]: Nothing to be done for `install-data-hook'. |
|---|
| 460 | :info:destroot Making install in demo |
|---|
| 461 | :info:destroot make[2]: Nothing to be done for `install-exec-am'. |
|---|
| 462 | :info:destroot make[2]: Nothing to be done for `install-data-am'. |
|---|
| 463 | :info:destroot Making install in tutorial |
|---|
| 464 | :info:destroot make[2]: Nothing to be done for `install-exec-am'. |
|---|
| 465 | :info:destroot make[2]: Nothing to be done for `install-data-am'. |
|---|
| 466 | :info:destroot Making install in share |
|---|
| 467 | :info:destroot make[3]: Nothing to be done for `install-exec-am'. |
|---|
| 468 | :info:destroot test -z "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/share/gnuplot/4.4/app-defaults" || /opt/local/bin/gmkdir -p "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/share/gnuplot/4.4/app-defaults" |
|---|
| 469 | :info:destroot /usr/bin/install -c -m 644 Gnuplot '/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/work/destroot/opt/local/share/gnuplot/4.4/app-defaults' |
|---|
| 470 | :info:destroot make[2]: Nothing to be done for `install-exec-am'. |
|---|
| 471 | :info:destroot make[2]: Nothing to be done for `install-data-am'. |
|---|
| 472 | :debug:destroot Executing proc-post-org.macports.destroot-destroot-0 |
|---|
| 473 | :error:destroot Target org.macports.destroot returned: xinstall: Cannot stat: /opt/local/var/macports/distfiles/gnuplot/gnuplot-4.4.0.pdf, No such file or directory |
|---|
| 474 | :debug:destroot Backtrace: xinstall: Cannot stat: /opt/local/var/macports/distfiles/gnuplot/gnuplot-4.4.0.pdf, No such file or directory |
|---|
| 475 | while executing |
|---|
| 476 | "$post $targetname" |
|---|
| 477 | :info:destroot Warning: the following items did not execute (for gnuplot): org.macports.activate org.macports.destroot org.macports.install |
|---|
| 478 | :notice:destroot Log for gnuplot is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/main.log |
|---|
