Ticket #32234: newpoppler.log

File newpoppler.log, 143.7 KB (added by sewebster@…, 12 years ago)
Line 
1version:1
2:debug:main epoch: in tree: 0 installed: 0
3:debug:main pkgconfig 0.26_0 exists in the ports tree
4:debug:main pkgconfig 0.26_0 +universal is the latest installed
5:debug:main pkgconfig 0.26_0 +universal is active
6:debug:main Merging existing variants '+universal' into variants
7:debug:main new fully merged portvariants: universal +
8:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
9:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
10:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
11:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
12:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
13:debug:main adding the default universal variant
14:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
15:debug:main Executing variant universal provides universal
16:debug:main No need to upgrade! pkgconfig 0.26_0 >= pkgconfig 0.26_0
17:debug:main epoch: in tree: 0 installed: 0
18:debug:main glib2 2.30.2_1 exists in the ports tree
19:debug:main glib2 2.30.2_1 +universal is the latest installed
20:debug:main glib2 2.30.2_1 +universal is active
21:debug:main Merging existing variants '+universal' into variants
22:debug:main new fully merged portvariants: universal +
23:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/glib2
24:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
25:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
26:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
27:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
28:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
29:debug:main adding the default universal variant
30:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
31:debug:main Executing variant universal provides universal
32:debug:main No need to upgrade! glib2 2.30.2_1 >= glib2 2.30.2_1
33:debug:main epoch: in tree: 0 installed: 0
34:debug:main gettext 0.18.1.1_2 exists in the ports tree
35:debug:main gettext 0.18.1.1_2 +universal is the latest installed
36:debug:main gettext 0.18.1.1_2 +universal is active
37:debug:main Merging existing variants '+universal' into variants
38:debug:main new fully merged portvariants: universal +
39:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
40:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
41:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
42:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
43:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
44:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
45:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
46:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
47:debug:main universal variant already exists, so not adding the default one
48:debug:main Executing variant universal provides universal
49:debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2
50:debug:main epoch: in tree: 0 installed: 0
51:debug:main libiconv 1.14_0 exists in the ports tree
52:debug:main libiconv 1.14_0 +universal is the latest installed
53:debug:main libiconv 1.14_0 +universal is active
54:debug:main Merging existing variants '+universal' into variants
55:debug:main new fully merged portvariants: universal +
56:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
57:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
58:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
59:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
60:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
61:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
62:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
63:debug:main universal variant already exists, so not adding the default one
64:debug:main Executing variant universal provides universal
65:debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0
66:debug:main epoch: in tree: 0 installed: 0
67:debug:main ncurses 5.9_1 exists in the ports tree
68:debug:main ncurses 5.9_1 +universal is the latest installed
69:debug:main ncurses 5.9_1 +universal is active
70:debug:main Merging existing variants '+universal' into variants
71:debug:main new fully merged portvariants: universal +
72:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
73:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
74:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
75:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
76:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
77:debug:main adding the default universal variant
78:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
79:debug:main Executing variant universal provides universal
80:debug:main No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1
81:debug:main epoch: in tree: 0 installed: 0
82:debug:main expat 2.0.1_1 exists in the ports tree
83:debug:main expat 2.0.1_1 +universal is the latest installed
84:debug:main expat 2.0.1_1 +universal is active
85:debug:main Merging existing variants '+universal' into variants
86:debug:main new fully merged portvariants: universal +
87:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
88:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
89:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
90:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
91:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
92:debug:main adding the default universal variant
93:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
94:debug:main Executing variant universal provides universal
95:debug:main No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1
96:debug:main epoch: in tree: 0 installed: 0
97:debug:main zlib 1.2.5_0 exists in the ports tree
98:debug:main zlib 1.2.5_0 +universal is the latest installed
99:debug:main zlib 1.2.5_0 +universal is active
100:debug:main Merging existing variants '+universal' into variants
101:debug:main new fully merged portvariants: universal +
102:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
103:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
104:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
105:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
106:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
107:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
108:debug:main adding the default universal variant
109:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
110:debug:main Executing variant universal provides universal
111:debug:main No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0
112:debug:main epoch: in tree: 0 installed: 0
113:debug:main libffi 3.0.10_1 exists in the ports tree
114:debug:main libffi 3.0.10_1  is the latest installed
115:debug:main libffi 3.0.10_1 +universal is active
116:debug:main Merging existing variants '+universal' into variants
117:debug:main new fully merged portvariants: universal +
118:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libffi
119:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
120:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
121:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
122:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
123:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
124:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
125:debug:main universal variant already exists, so not adding the default one
126:debug:main Executing variant universal provides universal
127:debug:main No need to upgrade! libffi 3.0.10_1 >= libffi 3.0.10_1
128:debug:main epoch: in tree: 0 installed: 0
129:debug:main perl5 5.12.3_1 exists in the ports tree
130:debug:main perl5 5.12.3_1 +perl5_12 is the latest installed
131:debug:main perl5 5.12.3_1 +perl5_12 is active
132:debug:main Merging existing variants '+perl5_12' into variants
133:debug:main new fully merged portvariants: perl5_12 +
134:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
135:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
136:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
137:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
138:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
139:debug:main universal_variant is false, so not adding the default universal variant
140:debug:main Executing variant perl5_12 provides perl5_12
141:debug:main No need to upgrade! perl5 5.12.3_1 >= perl5 5.12.3_1
142:debug:main epoch: in tree: 0 installed: 0
143:debug:main perl5.12 5.12.3_2 exists in the ports tree
144:debug:main perl5.12 5.12.3_2  is the latest installed
145:debug:main perl5.12 5.12.3_2 +universal is active
146:debug:main Merging existing variants '+universal' into variants
147:debug:main new fully merged portvariants: universal +
148:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.12
149:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
150:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
151:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
152:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
153:debug:main adding the default universal variant
154:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
155:debug:main Executing variant universal provides universal
156:debug:main No need to upgrade! perl5.12 5.12.3_2 >= perl5.12 5.12.3_2
157:debug:main epoch: in tree: 0 installed: 0
158:debug:main gdbm 1.10_0 exists in the ports tree
159:debug:main gdbm 1.10_0 +universal is the latest installed
160:debug:main gdbm 1.10_0 +universal is active
161:debug:main Merging existing variants '+universal' into variants
162:debug:main new fully merged portvariants: universal +
163:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm
164:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
165:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
166:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
167:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
168:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
169:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
170:debug:main universal variant already exists, so not adding the default one
171:debug:main Executing variant universal provides universal
172:debug:main No need to upgrade! gdbm 1.10_0 >= gdbm 1.10_0
173:debug:main epoch: in tree: 0 installed: 0
174:debug:main curl 7.23.1_0 exists in the ports tree
175:debug:main curl 7.23.1_0 +ssl is the latest installed
176:debug:main curl 7.23.1_0 +ssl is active
177:debug:main Merging existing variants '+ssl' into variants
178:debug:main new fully merged portvariants: ssl +
179:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl
180:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
181:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
182:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
183:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
184:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
185:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
186:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
187:debug:main universal variant already exists, so not adding the default one
188:debug:main Executing variant ssl provides ssl
189:debug:main No need to upgrade! curl 7.23.1_0 >= curl 7.23.1_0
190:debug:main epoch: in tree: 0 installed: 0
191:debug:main libidn 1.22_0 exists in the ports tree
192:debug:main libidn 1.22_0  is the latest installed
193:debug:main libidn 1.22_0  is active
194:debug:main Merging existing variants '' into variants
195:debug:main new fully merged portvariants:
196:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/mail/libidn
197:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
198:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
199:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
200:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
201:debug:main adding the default universal variant
202:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
203:debug:main No need to upgrade! libidn 1.22_0 >= libidn 1.22_0
204:debug:main epoch: in tree: 1 installed: 1
205:debug:main openssl 1.0.0e_1 exists in the ports tree
206:debug:main openssl 1.0.0e_1 +universal is the latest installed
207:debug:main openssl 1.0.0e_1 +universal is active
208:debug:main Merging existing variants '+universal' into variants
209:debug:main new fully merged portvariants: universal +
210:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
211:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
212:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
213:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
214:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
215:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
216:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
217:debug:main universal variant already exists, so not adding the default one
218:debug:main Executing variant universal provides universal
219:debug:main No need to upgrade! openssl 1.0.0e_1 >= openssl 1.0.0e_1
220:debug:main epoch: in tree: 0 installed: 0
221:debug:main curl-ca-bundle 7.23.1_0 exists in the ports tree
222:debug:main curl-ca-bundle 7.23.1_0  is the latest installed
223:debug:main curl-ca-bundle 7.23.1_0  is active
224:debug:main Merging existing variants '' into variants
225:debug:main new fully merged portvariants:
226:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl-ca-bundle
227:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
228:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
229:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
230:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
231:debug:main universal_variant is false, so not adding the default universal variant
232:debug:main No need to upgrade! curl-ca-bundle 7.23.1_0 >= curl-ca-bundle 7.23.1_0
233:debug:main epoch: in tree: 0 installed: 0
234:debug:main gtk2 2.24.8_1 exists in the ports tree
235:debug:main gtk2 2.24.8_1 +universal+x11 is the latest installed
236:debug:main gtk2 2.24.8_1 +universal+x11 is active
237:debug:main Merging existing variants '+universal+x11' into variants
238:debug:main new fully merged portvariants: universal + x11 +
239:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gtk2
240:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
241:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
242:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
243:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
244:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
245:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
246:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
247:debug:main universal variant already exists, so not adding the default one
248:debug:main Executing variant universal provides universal
249:debug:main Executing variant x11 provides x11
250:debug:main No need to upgrade! gtk2 2.24.8_1 >= gtk2 2.24.8_1
251:debug:main epoch: in tree: 2 installed: 2
252:debug:main atk 1.32.0_0 exists in the ports tree
253:debug:main atk 1.32.0_0  is the latest installed
254:debug:main atk 1.32.0_0 +universal is active
255:debug:main Merging existing variants '+universal' into variants
256:debug:main new fully merged portvariants: universal +
257:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/atk
258:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
259:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
260:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
261:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
262:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
263:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
264:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
265:debug:main universal variant already exists, so not adding the default one
266:debug:main Executing variant universal provides universal
267:debug:main No need to upgrade! atk 1.32.0_0 >= atk 1.32.0_0
268:debug:main epoch: in tree: 1 installed: 1
269:debug:main pango 1.28.4_2 exists in the ports tree
270:debug:main pango 1.28.4_2 +universal+x11 is the latest installed
271:debug:main pango 1.28.4_2 +universal+x11 is active
272:debug:main Merging existing variants '+universal+x11' into variants
273:debug:main new fully merged portvariants: universal + x11 +
274:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/pango
275:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
276:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
277:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
278:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
279:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
280:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
281:debug:main adding the default universal variant
282:debug:main Executing variant x11 provides x11
283:debug:main Executing variant universal provides universal
284:debug:main No need to upgrade! pango 1.28.4_2 >= pango 1.28.4_2
285:debug:main epoch: in tree: 0 installed: 0
286:debug:main cairo 1.10.2_4 exists in the ports tree
287:debug:main cairo 1.10.2_4 +universal+x11 is the latest installed
288:debug:main cairo 1.10.2_4 +universal+x11 is active
289:debug:main Merging existing variants '+universal+x11' into variants
290:debug:main new fully merged portvariants: universal + x11 +
291:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/cairo
292:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
293:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
294:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
295:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
296:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
297:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
298:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
299:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
300:debug:main universal variant already exists, so not adding the default one
301:debug:main Executing variant universal provides universal
302:debug:main Executing variant x11 provides x11
303:debug:main No need to upgrade! cairo 1.10.2_4 >= cairo 1.10.2_4
304:debug:main epoch: in tree: 0 installed: 0
305:debug:main libpixman 0.24.0_0 exists in the ports tree
306:debug:main libpixman 0.24.0_0 +universal is the latest installed
307:debug:main libpixman 0.24.0_0 +universal is active
308:debug:main Merging existing variants '+universal' into variants
309:debug:main new fully merged portvariants: universal +
310:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpixman
311:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
312:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
313:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
314:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
315:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
316:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
317:debug:main universal variant already exists, so not adding the default one
318:debug:main Executing variant universal provides universal
319:debug:main No need to upgrade! libpixman 0.24.0_0 >= libpixman 0.24.0_0
320:debug:main epoch: in tree: 0 installed: 0
321:debug:main fontconfig 2.8.0_0 exists in the ports tree
322:debug:main fontconfig 2.8.0_0 +macosx+universal is the latest installed
323:debug:main fontconfig 2.8.0_0 +macosx+universal is active
324:debug:main Merging existing variants '+macosx+universal' into variants
325:debug:main new fully merged portvariants: universal + macosx +
326:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig
327:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
328:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
329:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
330:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
331:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
332:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
333:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
334:debug:main universal variant already exists, so not adding the default one
335:debug:main Requested variant macosx is not provided by port fontconfig.
336:debug:main Executing variant universal provides universal
337:debug:main Skipping upgrade since fontconfig 2.8.0_0 >= fontconfig 2.8.0_0, even though installed variants "+macosx+universal" do not match "+universal".
338:debug:main epoch: in tree: 0 installed: 0
339:debug:main freetype 2.4.8_0 exists in the ports tree
340:debug:main freetype 2.4.8_0 +universal is the latest installed
341:debug:main freetype 2.4.8_0 +universal is active
342:debug:main Merging existing variants '+universal' into variants
343:debug:main new fully merged portvariants: universal +
344:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype
345:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
346:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
347:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
348:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
349:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
350:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
351:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
352:debug:main universal variant already exists, so not adding the default one
353:debug:main Executing variant universal provides universal
354:debug:main No need to upgrade! freetype 2.4.8_0 >= freetype 2.4.8_0
355:debug:main epoch: in tree: 0 installed: 0
356:debug:main bzip2 1.0.6_0 exists in the ports tree
357:debug:main bzip2 1.0.6_0  is the latest installed
358:debug:main bzip2 1.0.6_0 +universal is active
359:debug:main Merging existing variants '+universal' into variants
360:debug:main new fully merged portvariants: universal +
361:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
362:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
363:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
364:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
365:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
366:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
367:debug:main universal variant already exists, so not adding the default one
368:debug:main Executing variant universal provides universal
369:debug:main No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0
370:debug:main epoch: in tree: 0 installed: 0
371:debug:main libpng 1.4.8_0 exists in the ports tree
372:debug:main libpng 1.4.8_0 +universal is the latest installed
373:debug:main libpng 1.4.8_0 +universal is active
374:debug:main Merging existing variants '+universal' into variants
375:debug:main new fully merged portvariants: universal +
376:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng
377:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
378:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
379:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
380:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
381:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
382:debug:main adding the default universal variant
383:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
384:debug:main Executing variant universal provides universal
385:debug:main No need to upgrade! libpng 1.4.8_0 >= libpng 1.4.8_0
386:debug:main epoch: in tree: 0 installed: 0
387:debug:main xrender 0.9.6_1 exists in the ports tree
388:debug:main xrender 0.9.6_1 +universal is the latest installed
389:debug:main xrender 0.9.6_1 +universal is active
390:debug:main Merging existing variants '+universal' into variants
391:debug:main new fully merged portvariants: universal +
392:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender
393:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
394:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
395:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
396:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
397:debug:main adding the default universal variant
398:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
399:debug:main Executing variant universal provides universal
400:debug:main No need to upgrade! xrender 0.9.6_1 >= xrender 0.9.6_1
401:debug:main epoch: in tree: 0 installed: 0
402:debug:main xorg-libX11 1.4.4_0 exists in the ports tree
403:debug:main xorg-libX11 1.4.4_0 +universal is the latest installed
404:debug:main xorg-libX11 1.4.4_0 +universal is active
405:debug:main Merging existing variants '+universal' into variants
406:debug:main new fully merged portvariants: universal +
407:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11
408:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
409:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
410:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
411:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
412:debug:main adding the default universal variant
413:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
414:debug:main Executing variant universal provides universal
415:debug:main No need to upgrade! xorg-libX11 1.4.4_0 >= xorg-libX11 1.4.4_0
416:debug:main epoch: in tree: 0 installed: 0
417:debug:main xorg-libXdmcp 1.1.0_0 exists in the ports tree
418:debug:main xorg-libXdmcp 1.1.0_0 +universal is the latest installed
419:debug:main xorg-libXdmcp 1.1.0_0 +universal is active
420:debug:main Merging existing variants '+universal' into variants
421:debug:main new fully merged portvariants: universal +
422:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp
423:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
424:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
425:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
426:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
427:debug:main adding the default universal variant
428:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
429:debug:main Executing variant universal provides universal
430:debug:main No need to upgrade! xorg-libXdmcp 1.1.0_0 >= xorg-libXdmcp 1.1.0_0
431:debug:main epoch: in tree: 0 installed: 0
432:debug:main xorg-libXau 1.0.6_0 exists in the ports tree
433:debug:main xorg-libXau 1.0.6_0 +universal is the latest installed
434:debug:main xorg-libXau 1.0.6_0 +universal is active
435:debug:main Merging existing variants '+universal' into variants
436:debug:main new fully merged portvariants: universal +
437:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau
438:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
439:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
440:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
441:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
442:debug:main adding the default universal variant
443:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
444:debug:main Executing variant universal provides universal
445:debug:main No need to upgrade! xorg-libXau 1.0.6_0 >= xorg-libXau 1.0.6_0
446:debug:main epoch: in tree: 0 installed: 0
447:debug:main xorg-xproto 7.0.22_0 exists in the ports tree
448:debug:main xorg-xproto 7.0.22_0  is the latest installed
449:debug:main xorg-xproto 7.0.22_0  is active
450:debug:main Merging existing variants '' into variants
451:debug:main new fully merged portvariants:
452:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto
453:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
454:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
455:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
456:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
457:debug:main only one arch supported, so not adding the default universal variant
458:debug:main No need to upgrade! xorg-xproto 7.0.22_0 >= xorg-xproto 7.0.22_0
459:debug:main epoch: in tree: 0 installed: 0
460:debug:main xorg-libxcb 1.7_0 exists in the ports tree
461:debug:main xorg-libxcb 1.7_0 +universal is the latest installed
462:debug:main xorg-libxcb 1.7_0 +universal is active
463:debug:main Merging existing variants '+universal' into variants
464:debug:main new fully merged portvariants: universal +
465:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libxcb
466:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
467:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
468:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
469:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
470:debug:main adding the default universal variant
471:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
472:debug:main Executing variant python27 provides python27
473:debug:main Executing variant universal provides universal
474:debug:main Skipping upgrade since xorg-libxcb 1.7_0 >= xorg-libxcb 1.7_0, even though installed variants "+universal" do not match "+python27+universal".
475:debug:main epoch: in tree: 0 installed: 0
476:debug:main xorg-xcb-proto 1.6_0 exists in the ports tree
477:debug:main xorg-xcb-proto 1.6_0 +python26 is the latest installed
478:debug:main xorg-xcb-proto 1.6_0 +python26 is active
479:debug:main Merging existing variants '+python26' into variants
480:debug:main new fully merged portvariants: python26 +
481:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcb-proto
482:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
483:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
484:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
485:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
486:debug:main only one arch supported, so not adding the default universal variant
487:debug:main Executing variant python26 provides python26
488:debug:main No need to upgrade! xorg-xcb-proto 1.6_0 >= xorg-xcb-proto 1.6_0
489:debug:main epoch: in tree: 0 installed: 0
490:debug:main libxml2 2.7.8_0 exists in the ports tree
491:debug:main libxml2 2.7.8_0 +universal is the latest installed
492:debug:main libxml2 2.7.8_0 +universal is active
493:debug:main Merging existing variants '+universal' into variants
494:debug:main new fully merged portvariants: universal +
495:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2
496:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
497:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
498:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
499:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
500:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
501:debug:main adding the default universal variant
502:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
503:debug:main Executing variant universal provides universal
504:debug:main No need to upgrade! libxml2 2.7.8_0 >= libxml2 2.7.8_0
505:debug:main epoch: in tree: 0 installed: 0
506:debug:main python26 2.6.7_3 exists in the ports tree
507:debug:main python26 2.6.7_3  is the latest installed
508:debug:main python26 2.6.7_3  is active
509:debug:main Merging existing variants '' into variants
510:debug:main new fully merged portvariants:
511:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python26
512:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
513:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
514:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
515:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
516:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
517:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
518:debug:main universal variant already exists, so not adding the default one
519:debug:main No need to upgrade! python26 2.6.7_3 >= python26 2.6.7_3
520:debug:main epoch: in tree: 0 installed: 0
521:debug:main sqlite3 3.7.9_0 exists in the ports tree
522:debug:main sqlite3 3.7.9_0 +universal is the latest installed
523:debug:main sqlite3 3.7.9_0 +universal is active
524:debug:main Merging existing variants '+universal' into variants
525:debug:main new fully merged portvariants: universal +
526:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3
527:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
528:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
529:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
530:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
531:debug:main adding the default universal variant
532:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
533:debug:main Executing variant universal provides universal
534:debug:main No need to upgrade! sqlite3 3.7.9_0 >= sqlite3 3.7.9_0
535:debug:main epoch: in tree: 20090923 installed: 20090923
536:debug:main libedit 20110802-3.0_0 exists in the ports tree
537:debug:main libedit 20110802-3.0_0  is the latest installed
538:debug:main libedit 20110802-3.0_0 +universal is active
539:debug:main Merging existing variants '+universal' into variants
540:debug:main new fully merged portvariants: universal +
541:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libedit
542:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
543:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
544:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
545:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
546:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
547:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
548:debug:main universal variant already exists, so not adding the default one
549:debug:main Executing variant universal provides universal
550:debug:main No need to upgrade! libedit 20110802-3.0_0 >= libedit 20110802-3.0_0
551:debug:main epoch: in tree: 0 installed: 0
552:debug:main db46 4.6.21_6 exists in the ports tree
553:debug:main db46 4.6.21_6  is the latest installed
554:debug:main db46 4.6.21_6  is active
555:debug:main Merging existing variants '' into variants
556:debug:main new fully merged portvariants:
557:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46
558:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
559:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
560:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
561:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
562:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
563:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
564:debug:main universal variant already exists, so not adding the default one
565:debug:main Executing variant java provides java
566:debug:main Skipping upgrade since db46 4.6.21_6 >= db46 4.6.21_6, even though installed variants "" do not match "+java".
567:debug:main epoch: in tree: 0 installed: 0
568:debug:main python_select 0.3_1 exists in the ports tree
569:debug:main python_select 0.3_1  is the latest installed
570:debug:main python_select 0.3_1  is active
571:debug:main Merging existing variants '' into variants
572:debug:main new fully merged portvariants:
573:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/python_select
574:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
575:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
576:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
577:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
578:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
579:debug:main universal_variant is false, so not adding the default universal variant
580:debug:main No need to upgrade! python_select 0.3_1 >= python_select 0.3_1
581:debug:main epoch: in tree: 0 installed: 0
582:debug:main xorg-libpthread-stubs 0.3_0 exists in the ports tree
583:debug:main xorg-libpthread-stubs 0.3_0  is the latest installed
584:debug:main xorg-libpthread-stubs 0.3_0  is active
585:debug:main Merging existing variants '' into variants
586:debug:main new fully merged portvariants:
587:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libpthread-stubs
588:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
589:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
590:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
591:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
592:debug:main only one arch supported, so not adding the default universal variant
593:debug:main No need to upgrade! xorg-libpthread-stubs 0.3_0 >= xorg-libpthread-stubs 0.3_0
594:debug:main epoch: in tree: 2 installed: 2
595:debug:main python27 2.7.2_3 exists in the ports tree
596:debug:main python27 2.7.2_3 +universal is the latest installed
597:debug:main python27 2.7.2_3 +universal is active
598:debug:main Merging existing variants '+universal' into variants
599:debug:main new fully merged portvariants: universal +
600:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python27
601:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
602:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
603:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
604:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
605:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
606:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
607:debug:main universal variant already exists, so not adding the default one
608:debug:main Executing variant universal provides universal
609:debug:main No need to upgrade! python27 2.7.2_3 >= python27 2.7.2_3
610:debug:main epoch: in tree: 0 installed: 0
611:debug:main xorg-kbproto 1.0.5_0 exists in the ports tree
612:debug:main xorg-kbproto 1.0.5_0  is the latest installed
613:debug:main xorg-kbproto 1.0.5_0  is active
614:debug:main Merging existing variants '' into variants
615:debug:main new fully merged portvariants:
616:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto
617:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
618:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
619:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
620:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
621:debug:main only one arch supported, so not adding the default universal variant
622:debug:main No need to upgrade! xorg-kbproto 1.0.5_0 >= xorg-kbproto 1.0.5_0
623:debug:main epoch: in tree: 0 installed: 0
624:debug:main xorg-renderproto 0.11.1_0 exists in the ports tree
625:debug:main xorg-renderproto 0.11.1_0  is the latest installed
626:debug:main xorg-renderproto 0.11.1_0  is active
627:debug:main Merging existing variants '' into variants
628:debug:main new fully merged portvariants:
629:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-renderproto
630:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
631:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
632:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
633:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
634:debug:main only one arch supported, so not adding the default universal variant
635:debug:main No need to upgrade! xorg-renderproto 0.11.1_0 >= xorg-renderproto 0.11.1_0
636:debug:main epoch: in tree: 0 installed: 0
637:debug:main xorg-xcb-util 0.3.8_0 exists in the ports tree
638:debug:main xorg-xcb-util 0.3.8_0  is the latest installed
639:debug:main xorg-xcb-util 0.3.8_0 +universal is active
640:debug:main Merging existing variants '+universal' into variants
641:debug:main new fully merged portvariants: universal +
642:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcb-util
643:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
644:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
645:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
646:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
647:debug:main adding the default universal variant
648:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
649:debug:main Executing variant universal provides universal
650:debug:main No need to upgrade! xorg-xcb-util 0.3.8_0 >= xorg-xcb-util 0.3.8_0
651:debug:main epoch: in tree: 0 installed: 0
652:debug:main Xft2 2.2.0_0 exists in the ports tree
653:debug:main Xft2 2.2.0_0  is the latest installed
654:debug:main Xft2 2.2.0_0 +universal is active
655:debug:main Merging existing variants '+universal' into variants
656:debug:main new fully merged portvariants: universal +
657:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2
658:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
659:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
660:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
661:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
662:debug:main adding the default universal variant
663:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
664:debug:main Executing variant universal provides universal
665:debug:main No need to upgrade! Xft2 2.2.0_0 >= Xft2 2.2.0_0
666:debug:main epoch: in tree: 2 installed: 2
667:debug:main gdk-pixbuf2 2.22.1_1 exists in the ports tree
668:debug:main gdk-pixbuf2 2.22.1_1  is the latest installed
669:debug:main gdk-pixbuf2 2.22.1_1 +universal is active
670:debug:main Merging existing variants '+universal' into variants
671:debug:main new fully merged portvariants: universal +
672:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/gdk-pixbuf2
673:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
674:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
675:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
676:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
677:debug:main adding the default universal variant
678:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
679:debug:main Executing variant universal provides universal
680:debug:main No need to upgrade! gdk-pixbuf2 2.22.1_1 >= gdk-pixbuf2 2.22.1_1
681:debug:main epoch: in tree: 0 installed: 0
682:debug:main jasper 1.900.1_8 exists in the ports tree
683:debug:main jasper 1.900.1_8 +universal is the latest installed
684:debug:main jasper 1.900.1_8 +universal is active
685:debug:main Merging existing variants '+universal' into variants
686:debug:main new fully merged portvariants: universal +
687:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jasper
688:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
689:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
690:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
691:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
692:debug:main adding the default universal variant
693:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
694:debug:main Executing variant universal provides universal
695:debug:main No need to upgrade! jasper 1.900.1_8 >= jasper 1.900.1_8
696:debug:main epoch: in tree: 0 installed: 0
697:debug:main jpeg 8c_0 exists in the ports tree
698:debug:main jpeg 8c_0 +universal is the latest installed
699:debug:main jpeg 8c_0 +universal is active
700:debug:main Merging existing variants '+universal' into variants
701:debug:main new fully merged portvariants: universal +
702:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg
703:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
704:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
705:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
706:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
707:debug:main adding the default universal variant
708:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
709:debug:main Executing variant universal provides universal
710:debug:main No need to upgrade! jpeg 8c_0 >= jpeg 8c_0
711:debug:main epoch: in tree: 0 installed: 0
712:debug:main tiff 3.9.5_0 exists in the ports tree
713:debug:main tiff 3.9.5_0 +universal is the latest installed
714:debug:main tiff 3.9.5_0 +universal is active
715:debug:main Merging existing variants '+universal' into variants
716:debug:main new fully merged portvariants: universal +
717:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff
718:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
719:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
720:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
721:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
722:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
723:debug:main adding the default universal variant
724:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
725:debug:main Executing variant universal provides universal
726:debug:main No need to upgrade! tiff 3.9.5_0 >= tiff 3.9.5_0
727:debug:main epoch: in tree: 0 installed: 0
728:debug:main xorg-libXi 1.4.3_0 exists in the ports tree
729:debug:main xorg-libXi 1.4.3_0 +universal is the latest installed
730:debug:main xorg-libXi 1.4.3_0 +universal is active
731:debug:main Merging existing variants '+universal' into variants
732:debug:main new fully merged portvariants: universal +
733:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXi
734:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
735:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
736:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
737:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
738:debug:main adding the default universal variant
739:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
740:debug:main Executing variant universal provides universal
741:debug:main No need to upgrade! xorg-libXi 1.4.3_0 >= xorg-libXi 1.4.3_0
742:debug:main epoch: in tree: 0 installed: 0
743:debug:main xorg-libXext 1.3.0_0 exists in the ports tree
744:debug:main xorg-libXext 1.3.0_0 +universal is the latest installed
745:debug:main xorg-libXext 1.3.0_0 +universal is active
746:debug:main Merging existing variants '+universal' into variants
747:debug:main new fully merged portvariants: universal +
748:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXext
749:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
750:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
751:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
752:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
753:debug:main adding the default universal variant
754:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
755:debug:main Executing variant universal provides universal
756:debug:main No need to upgrade! xorg-libXext 1.3.0_0 >= xorg-libXext 1.3.0_0
757:debug:main epoch: in tree: 0 installed: 0
758:debug:main xorg-xextproto 7.2.0_0 exists in the ports tree
759:debug:main xorg-xextproto 7.2.0_0  is the latest installed
760:debug:main xorg-xextproto 7.2.0_0  is active
761:debug:main Merging existing variants '' into variants
762:debug:main new fully merged portvariants:
763:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto
764:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
765:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
766:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
767:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
768:debug:main only one arch supported, so not adding the default universal variant
769:debug:main No need to upgrade! xorg-xextproto 7.2.0_0 >= xorg-xextproto 7.2.0_0
770:debug:main epoch: in tree: 0 installed: 0
771:debug:main xorg-inputproto 2.0.99.1_0 exists in the ports tree
772:debug:main xorg-inputproto 2.0.99.1_0  is the latest installed
773:debug:main xorg-inputproto 2.0.99.1_0  is active
774:debug:main Merging existing variants '' into variants
775:debug:main new fully merged portvariants:
776:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-inputproto
777:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
778:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
779:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
780:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
781:debug:main only one arch supported, so not adding the default universal variant
782:debug:main No need to upgrade! xorg-inputproto 2.0.99.1_0 >= xorg-inputproto 2.0.99.1_0
783:debug:main epoch: in tree: 0 installed: 0
784:debug:main xorg-libXrandr 1.3.2_0 exists in the ports tree
785:debug:main xorg-libXrandr 1.3.2_0 +universal is the latest installed
786:debug:main xorg-libXrandr 1.3.2_0 +universal is active
787:debug:main Merging existing variants '+universal' into variants
788:debug:main new fully merged portvariants: universal +
789:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXrandr
790:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
791:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
792:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
793:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
794:debug:main adding the default universal variant
795:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
796:debug:main Executing variant universal provides universal
797:debug:main No need to upgrade! xorg-libXrandr 1.3.2_0 >= xorg-libXrandr 1.3.2_0
798:debug:main epoch: in tree: 0 installed: 0
799:debug:main xorg-randrproto 1.3.2_0 exists in the ports tree
800:debug:main xorg-randrproto 1.3.2_0  is the latest installed
801:debug:main xorg-randrproto 1.3.2_0  is active
802:debug:main Merging existing variants '' into variants
803:debug:main new fully merged portvariants:
804:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-randrproto
805:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
806:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
807:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
808:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
809:debug:main only one arch supported, so not adding the default universal variant
810:debug:main No need to upgrade! xorg-randrproto 1.3.2_0 >= xorg-randrproto 1.3.2_0
811:debug:main epoch: in tree: 0 installed: 0
812:debug:main xorg-libXcursor 1.1.12_0 exists in the ports tree
813:debug:main xorg-libXcursor 1.1.12_0 +universal is the latest installed
814:debug:main xorg-libXcursor 1.1.12_0 +universal is active
815:debug:main Merging existing variants '+universal' into variants
816:debug:main new fully merged portvariants: universal +
817:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXcursor
818:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
819:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
820:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
821:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
822:debug:main adding the default universal variant
823:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
824:debug:main Executing variant universal provides universal
825:debug:main No need to upgrade! xorg-libXcursor 1.1.12_0 >= xorg-libXcursor 1.1.12_0
826:debug:main epoch: in tree: 0 installed: 0
827:debug:main xorg-libXfixes 5.0_0 exists in the ports tree
828:debug:main xorg-libXfixes 5.0_0 +universal is the latest installed
829:debug:main xorg-libXfixes 5.0_0 +universal is active
830:debug:main Merging existing variants '+universal' into variants
831:debug:main new fully merged portvariants: universal +
832:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXfixes
833:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
834:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
835:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
836:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
837:debug:main adding the default universal variant
838:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
839:debug:main Executing variant universal provides universal
840:debug:main No need to upgrade! xorg-libXfixes 5.0_0 >= xorg-libXfixes 5.0_0
841:debug:main epoch: in tree: 0 installed: 0
842:debug:main xorg-fixesproto 5.0_0 exists in the ports tree
843:debug:main xorg-fixesproto 5.0_0  is the latest installed
844:debug:main xorg-fixesproto 5.0_0  is active
845:debug:main Merging existing variants '' into variants
846:debug:main new fully merged portvariants:
847:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-fixesproto
848:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
849:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
850:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
851:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
852:debug:main only one arch supported, so not adding the default universal variant
853:debug:main No need to upgrade! xorg-fixesproto 5.0_0 >= xorg-fixesproto 5.0_0
854:debug:main epoch: in tree: 0 installed: 0
855:debug:main xorg-libXinerama 1.1.1_0 exists in the ports tree
856:debug:main xorg-libXinerama 1.1.1_0 +universal is the latest installed
857:debug:main xorg-libXinerama 1.1.1_0 +universal is active
858:debug:main Merging existing variants '+universal' into variants
859:debug:main new fully merged portvariants: universal +
860:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXinerama
861:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
862:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
863:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
864:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
865:debug:main adding the default universal variant
866:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
867:debug:main Executing variant universal provides universal
868:debug:main No need to upgrade! xorg-libXinerama 1.1.1_0 >= xorg-libXinerama 1.1.1_0
869:debug:main epoch: in tree: 0 installed: 0
870:debug:main xorg-xineramaproto 1.2.1_0 exists in the ports tree
871:debug:main xorg-xineramaproto 1.2.1_0  is the latest installed
872:debug:main xorg-xineramaproto 1.2.1_0  is active
873:debug:main Merging existing variants '' into variants
874:debug:main new fully merged portvariants:
875:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xineramaproto
876:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
877:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
878:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
879:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
880:debug:main only one arch supported, so not adding the default universal variant
881:debug:main No need to upgrade! xorg-xineramaproto 1.2.1_0 >= xorg-xineramaproto 1.2.1_0
882:debug:main epoch: in tree: 0 installed: 0
883:debug:main xorg-libXdamage 1.1.3_0 exists in the ports tree
884:debug:main xorg-libXdamage 1.1.3_0  is the latest installed
885:debug:main xorg-libXdamage 1.1.3_0 +universal is active
886:debug:main Merging existing variants '+universal' into variants
887:debug:main new fully merged portvariants: universal +
888:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdamage
889:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
890:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
891:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
892:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
893:debug:main adding the default universal variant
894:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
895:debug:main Executing variant universal provides universal
896:debug:main No need to upgrade! xorg-libXdamage 1.1.3_0 >= xorg-libXdamage 1.1.3_0
897:debug:main epoch: in tree: 0 installed: 0
898:debug:main xorg-damageproto 1.2.1_0 exists in the ports tree
899:debug:main xorg-damageproto 1.2.1_0  is the latest installed
900:debug:main xorg-damageproto 1.2.1_0  is active
901:debug:main Merging existing variants '' into variants
902:debug:main new fully merged portvariants:
903:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-damageproto
904:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
905:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
906:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
907:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
908:debug:main only one arch supported, so not adding the default universal variant
909:debug:main No need to upgrade! xorg-damageproto 1.2.1_0 >= xorg-damageproto 1.2.1_0
910:debug:main epoch: in tree: 0 installed: 0
911:debug:main xorg-libXcomposite 0.4.3_0 exists in the ports tree
912:debug:main xorg-libXcomposite 0.4.3_0 +universal is the latest installed
913:debug:main xorg-libXcomposite 0.4.3_0 +universal is active
914:debug:main Merging existing variants '+universal' into variants
915:debug:main new fully merged portvariants: universal +
916:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXcomposite
917:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
918:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
919:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
920:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
921:debug:main adding the default universal variant
922:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
923:debug:main Executing variant universal provides universal
924:debug:main No need to upgrade! xorg-libXcomposite 0.4.3_0 >= xorg-libXcomposite 0.4.3_0
925:debug:main epoch: in tree: 0 installed: 0
926:debug:main xorg-compositeproto 0.4.2_0 exists in the ports tree
927:debug:main xorg-compositeproto 0.4.2_0  is the latest installed
928:debug:main xorg-compositeproto 0.4.2_0  is active
929:debug:main Merging existing variants '' into variants
930:debug:main new fully merged portvariants:
931:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-compositeproto
932:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
933:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
934:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
935:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
936:debug:main only one arch supported, so not adding the default universal variant
937:debug:main No need to upgrade! xorg-compositeproto 0.4.2_0 >= xorg-compositeproto 0.4.2_0
938:debug:main epoch: in tree: 0 installed: 0
939:debug:main shared-mime-info 0.91_0 exists in the ports tree
940:debug:main shared-mime-info 0.91_0 +universal is the latest installed
941:debug:main shared-mime-info 0.91_0 +universal is active
942:debug:main Merging existing variants '+universal' into variants
943:debug:main new fully merged portvariants: universal +
944:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/shared-mime-info
945:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
946:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
947:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
948:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
949:debug:main adding the default universal variant
950:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
951:debug:main Executing variant universal provides universal
952:debug:main No need to upgrade! shared-mime-info 0.91_0 >= shared-mime-info 0.91_0
953:debug:main epoch: in tree: 0 installed: 0
954:debug:main hicolor-icon-theme 0.12_0 exists in the ports tree
955:debug:main hicolor-icon-theme 0.12_0  is the latest installed
956:debug:main hicolor-icon-theme 0.12_0  is active
957:debug:main Merging existing variants '' into variants
958:debug:main new fully merged portvariants:
959:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/hicolor-icon-theme
960:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
961:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
962:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
963:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
964:debug:main only one arch supported, so not adding the default universal variant
965:debug:main No need to upgrade! hicolor-icon-theme 0.12_0 >= hicolor-icon-theme 0.12_0
966:debug:main epoch: in tree: 0 installed: 0
967:debug:main lcms 1.19_2 exists in the ports tree
968:debug:main lcms 1.19_2 +universal is the latest installed
969:debug:main lcms 1.19_2 +universal is active
970:debug:main Merging existing variants '+universal' into variants
971:debug:main new fully merged portvariants: universal +
972:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/lcms
973:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
974:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
975:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
976:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
977:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
978:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
979:debug:main universal variant already exists, so not adding the default one
980:debug:main Executing variant universal provides universal
981:debug:main No need to upgrade! lcms 1.19_2 >= lcms 1.19_2
982:debug:main epoch: in tree: 0 installed: 0
983:debug:main openjpeg 1.4-r697_1 exists in the ports tree
984:debug:main openjpeg 1.4-r697_1  is the latest installed
985:debug:main openjpeg 1.4-r697_1  is active
986:debug:main Merging existing variants '' into variants
987:debug:main new fully merged portvariants:
988:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/openjpeg
989:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
990:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
991:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
992:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
993:debug:main adding the default universal variant
994:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
995:debug:main No need to upgrade! openjpeg 1.4-r697_1 >= openjpeg 1.4-r697_1
996:debug:main epoch: in tree: 0 installed: 0
997:debug:main lcms2 2.2_0 exists in the ports tree
998:debug:main lcms2 2.2_0  is the latest installed
999:debug:main lcms2 2.2_0  is active
1000:debug:main Merging existing variants '' into variants
1001:debug:main new fully merged portvariants:
1002:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/lcms2
1003:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
1004:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1005:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1006:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1007:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
1008:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1009:debug:main universal variant already exists, so not adding the default one
1010:debug:main No need to upgrade! lcms2 2.2_0 >= lcms2 2.2_0
1011:debug:main epoch: in tree: 0 installed: 0
1012:debug:main jbigkit 2.0_2 exists in the ports tree
1013:debug:main jbigkit 2.0_2  is the latest installed
1014:debug:main jbigkit 2.0_2  is active
1015:debug:main Merging existing variants '' into variants
1016:debug:main new fully merged portvariants:
1017:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jbigkit
1018:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
1019:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1020:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1021:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1022:debug:main adding the default universal variant
1023:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
1024:debug:main No need to upgrade! jbigkit 2.0_2 >= jbigkit 2.0_2
1025:debug:main epoch: in tree: 0 installed: 0
1026:debug:main poppler-data 0.4.5_0 exists in the ports tree
1027:debug:main poppler-data 0.4.5_0  is the latest installed
1028:debug:main poppler-data 0.4.5_0  is active
1029:debug:main Merging existing variants '' into variants
1030:debug:main new fully merged portvariants:
1031:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/poppler-data
1032:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
1033:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
1034:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
1035:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
1036:debug:main universal_variant is false, so not adding the default universal variant
1037:debug:main No need to upgrade! poppler-data 0.4.5_0 >= poppler-data 0.4.5_0
1038:msg:main --->  Computing dependencies for poppler:msg:main
1039:debug:main Checking for conflicts against poppler
1040:debug:main Searching for dependency: mupdf
1041:debug:main Didn't find receipt, going to depspec regex for: mupdf
1042:debug:main Searching for dependency: xpdf-tools
1043:debug:main Didn't find receipt, going to depspec regex for: xpdf-tools
1044:debug:main Searching for dependency: pkgconfig
1045:debug:main Found Dependency: receipt exists for pkgconfig
1046:debug:main Searching for dependency: curl
1047:debug:main Found Dependency: receipt exists for curl
1048:debug:main Searching for dependency: gtk2
1049:debug:main Found Dependency: receipt exists for gtk2
1050:debug:main Searching for dependency: lcms
1051:debug:main Found Dependency: receipt exists for lcms
1052:debug:main Searching for dependency: openjpeg
1053:debug:main Found Dependency: receipt exists for openjpeg
1054:debug:main Searching for dependency: poppler-data
1055:debug:main Found Dependency: receipt exists for poppler-data
1056:debug:main Executing org.macports.main (poppler)
1057:debug:archivefetch archivefetch phase started at Fri Nov 25 13:16:40 PST 2011
1058:msg:archivefetch --->  Fetching archive for poppler
1059:debug:archivefetch Executing org.macports.archivefetch (poppler)
1060:info:archivefetch --->  poppler-0.18.1_0.darwin_10.x86_64.tbz2 doesn't seem to exist in /opt/local/var/macports/software/poppler
1061:msg:archivefetch --->  Attempting to fetch poppler-0.18.1_0.darwin_10.x86_64.tbz2 from http://packages.macports.org/poppler
1062:debug:archivefetch Fetching archive failed:: The requested URL returned error: 404
1063:debug:fetch fetch phase started at Fri Nov 25 13:16:40 PST 2011
1064:notice:fetch --->  Fetching poppler
1065:debug:fetch Executing org.macports.fetch (poppler)
1066:info:fetch --->  poppler-0.18.1.tar.gz doesn't seem to exist in /opt/local/var/macports/distfiles/poppler
1067:debug:fetch Pinging poppler.freedesktop.org...
1068:debug:fetch Pinging distfiles.macports.org...
1069:debug:fetch Pinging aarnet.au.distfiles.macports.org...
1070:debug:fetch Pinging her.gr.distfiles.macports.org...
1071:debug:fetch Pinging jog.id.distfiles.macports.org...
1072:debug:fetch Pinging lil.fr.distfiles.macports.org...
1073:debug:fetch Pinging sea.us.distfiles.macports.org...
1074:debug:fetch Pinging ykf.ca.distfiles.macports.org...
1075:debug:fetch poppler.freedesktop.org ping time is 7.812
1076:debug:fetch distfiles.macports.org ping time is 39.934
1077:debug:fetch aarnet.au.distfiles.macports.org ping time is 166.878
1078:debug:fetch her.gr.distfiles.macports.org ping time is 223.153
1079:debug:fetch jog.id.distfiles.macports.org ping time is 242.366
1080:debug:fetch lil.fr.distfiles.macports.org ping time is 157.340
1081:debug:fetch sea.us.distfiles.macports.org ping time is 10000
1082:debug:fetch ykf.ca.distfiles.macports.org ping time is 60.061
1083:notice:fetch --->  Attempting to fetch poppler-0.18.1.tar.gz from http://poppler.freedesktop.org/
1084:debug:checksum checksum phase started at Fri Nov 25 13:16:44 PST 2011
1085:notice:checksum --->  Verifying checksum(s) for poppler
1086:debug:checksum Executing org.macports.checksum (poppler)
1087:info:checksum --->  Checksumming poppler-0.18.1.tar.gz
1088:debug:checksum Correct (sha1) checksum for poppler-0.18.1.tar.gz
1089:debug:checksum Correct (rmd160) checksum for poppler-0.18.1.tar.gz
1090:debug:extract extract phase started at Fri Nov 25 13:16:44 PST 2011
1091:notice:extract --->  Extracting poppler
1092:debug:extract Executing org.macports.extract (poppler)
1093:info:extract --->  Extracting poppler-0.18.1.tar.gz
1094:debug:extract setting option extract.args to '/opt/local/var/macports/distfiles/poppler/poppler-0.18.1.tar.gz'
1095:debug:extract Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6'
1096:debug:extract Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work" && /usr/bin/gzip -dc '/opt/local/var/macports/distfiles/poppler/poppler-0.18.1.tar.gz' | /usr/bin/gnutar --no-same-owner -xf -'
1097:debug:extract Executing command line:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work" && /usr/bin/gzip -dc '/opt/local/var/macports/distfiles/poppler/poppler-0.18.1.tar.gz' | /usr/bin/gnutar --no-same-owner -xf -
1098:debug:patch patch phase started at Fri Nov 25 13:16:44 PST 2011
1099:debug:patch Executing org.macports.patch (poppler)
1100:debug:patch Executing proc-post-org.macports.patch-patch-0
1101:debug:configure configure phase started at Fri Nov 25 13:16:45 PST 2011
1102:notice:configure --->  Configuring poppler
1103:debug:configure Using compiler 'Mac OS X gcc 4.2'
1104:debug:configure Executing org.macports.configure (poppler)
1105:debug:configure Environment: CPATH='/opt/local/include' CFLAGS='-O2 -arch x86_64' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-O2 -arch x86_64' LIBRARY_PATH='/opt/local/lib' MACOSX_DEPLOYMENT_TARGET='10.6' CXX='/usr/bin/g++-4.2' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/.CC_PRINT_OPTIONS' F90FLAGS='-O2 -m64' LDFLAGS='-L/opt/local/lib -arch x86_64' OBJC='/usr/bin/gcc-4.2' FCFLAGS='-O2 -m64' INSTALL='/usr/bin/install -c' OBJCFLAGS='-O2 -arch x86_64' FFLAGS='-O2 -m64' CC_PRINT_OPTIONS='YES' CC='/usr/bin/gcc-4.2'
1106:debug:configure Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1" && ./configure --prefix=/opt/local --disable-introspection --disable-poppler-qt --disable-poppler-qt4 --enable-xpdf-headers --enable-zlib --enable-libcurl --mandir=/opt/local/share/man --x-includes=/opt/local/include --x-libraries=/opt/local/lib'
1107:debug:configure Executing command line:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1" && ./configure --prefix=/opt/local --disable-introspection --disable-poppler-qt --disable-poppler-qt4 --enable-xpdf-headers --enable-zlib --enable-libcurl --mandir=/opt/local/share/man --x-includes=/opt/local/include --x-libraries=/opt/local/lib
1108:info:configure configure: WARNING: unrecognized options: --disable-poppler-qt
1109:info:configure checking for a BSD-compatible install... /usr/bin/install -c
1110:info:configure checking whether build environment is sane... yes
1111:info:configure checking for a thread-safe mkdir -p... /opt/local/bin/gmkdir -p
1112:info:configure checking for gawk... no
1113:info:configure checking for mawk... no
1114:info:configure checking for nawk... no
1115:info:configure checking for awk... awk
1116:info:configure checking whether make sets $(MAKE)... yes
1117:info:configure checking for style of include used by make... GNU
1118:info:configure checking for gcc... /usr/bin/gcc-4.2
1119:info:configure checking whether the C compiler works... yes
1120:info:configure checking for C compiler default output file name... a.out
1121:info:configure checking for suffix of executables...
1122:info:configure checking whether we are cross compiling... no
1123:info:configure checking for suffix of object files... o
1124:info:configure checking whether we are using the GNU C compiler... yes
1125:info:configure checking whether /usr/bin/gcc-4.2 accepts -g... yes
1126:info:configure checking for /usr/bin/gcc-4.2 option to accept ISO C89... none needed
1127:info:configure checking dependency style of /usr/bin/gcc-4.2... gcc3
1128:info:configure checking how to run the C preprocessor... /usr/bin/gcc-4.2 -E
1129:info:configure checking for grep that handles long lines and -e... /usr/bin/grep
1130:info:configure checking for egrep... /usr/bin/grep -E
1131:info:configure checking for ANSI C header files... yes
1132:info:configure checking for sys/types.h... yes
1133:info:configure checking for sys/stat.h... yes
1134:info:configure checking for stdlib.h... yes
1135:info:configure checking for string.h... yes
1136:info:configure checking for memory.h... yes
1137:info:configure checking for strings.h... yes
1138:info:configure checking for inttypes.h... yes
1139:info:configure checking for stdint.h... yes
1140:info:configure checking for unistd.h... yes
1141:info:configure checking whether byte ordering is bigendian... no
1142:info:configure checking build system type... x86_64-apple-darwin10.8.0
1143:info:configure checking host system type... x86_64-apple-darwin10.8.0
1144:info:configure checking how to print strings... printf
1145:info:configure checking for a sed that does not truncate output... /opt/local/bin/gsed
1146:info:configure checking for fgrep... /usr/bin/grep -F
1147:info:configure checking for ld used by /usr/bin/gcc-4.2... /usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld
1148:info:configure checking if the linker (/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) is GNU ld... no
1149:info:configure checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm
1150:info:configure checking the name lister (/usr/bin/nm) interface... BSD nm
1151:info:configure checking whether ln -s works... yes
1152:info:configure checking the maximum length of command line arguments... 196608
1153:info:configure checking whether the shell understands some XSI constructs... yes
1154:info:configure checking whether the shell understands "+="... yes
1155:info:configure checking how to convert x86_64-apple-darwin10.8.0 file names to x86_64-apple-darwin10.8.0 format... func_convert_file_noop
1156:info:configure checking how to convert x86_64-apple-darwin10.8.0 file names to toolchain format... func_convert_file_noop
1157:info:configure checking for /usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld option to reload object files... -r
1158:info:configure checking for objdump... objdump
1159:info:configure checking how to recognize dependent libraries... pass_all
1160:info:configure checking for dlltool... dlltool
1161:info:configure checking how to associate runtime and link libraries... printf %s\n
1162:info:configure checking for ar... ar
1163:info:configure checking for archiver @FILE support... no
1164:info:configure checking for strip... strip
1165:info:configure checking for ranlib... ranlib
1166:info:configure checking command to parse /usr/bin/nm output from /usr/bin/gcc-4.2 object... ok
1167:info:configure checking for sysroot... no
1168:info:configure checking for mt... no
1169:info:configure checking if : is a manifest tool... no
1170:info:configure checking for dsymutil... dsymutil
1171:info:configure checking for nmedit... nmedit
1172:info:configure checking for lipo... lipo
1173:info:configure checking for otool... otool
1174:info:configure checking for otool64... no
1175:info:configure checking for -single_module linker flag... yes
1176:info:configure checking for -exported_symbols_list linker flag... yes
1177:info:configure checking for -force_load linker flag... yes
1178:info:configure checking for dlfcn.h... yes
1179:info:configure checking for objdir... .libs
1180:info:configure checking if /usr/bin/gcc-4.2 supports -fno-rtti -fno-exceptions... no
1181:info:configure checking for /usr/bin/gcc-4.2 option to produce PIC... -fno-common -DPIC
1182:info:configure checking if /usr/bin/gcc-4.2 PIC flag -fno-common -DPIC works... yes
1183:info:configure checking if /usr/bin/gcc-4.2 static flag -static works... no
1184:info:configure checking if /usr/bin/gcc-4.2 supports -c -o file.o... yes
1185:info:configure checking if /usr/bin/gcc-4.2 supports -c -o file.o... (cached) yes
1186:info:configure checking whether the /usr/bin/gcc-4.2 linker (/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) supports shared libraries... yes
1187:info:configure checking dynamic linker characteristics... darwin10.8.0 dyld
1188:info:configure checking how to hardcode library paths into programs... immediate
1189:info:configure checking whether stripping libraries is possible... yes
1190:info:configure checking if libtool supports shared libraries... yes
1191:info:configure checking whether to build shared libraries... yes
1192:info:configure checking whether to build static libraries... yes
1193:info:configure checking for gcc... (cached) /usr/bin/gcc-4.2
1194:info:configure checking whether we are using the GNU C compiler... (cached) yes
1195:info:configure checking whether /usr/bin/gcc-4.2 accepts -g... (cached) yes
1196:info:configure checking for /usr/bin/gcc-4.2 option to accept ISO C89... (cached) none needed
1197:info:configure checking dependency style of /usr/bin/gcc-4.2... (cached) gcc3
1198:info:configure checking whether we are using the GNU C++ compiler... yes
1199:info:configure checking whether /usr/bin/g++-4.2 accepts -g... yes
1200:info:configure checking dependency style of /usr/bin/g++-4.2... gcc3
1201:info:configure checking how to run the C++ preprocessor... /usr/bin/g++-4.2 -E
1202:info:configure checking for ld used by /usr/bin/g++-4.2... /usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld
1203:info:configure checking if the linker (/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) is GNU ld... no
1204:info:configure checking whether the /usr/bin/g++-4.2 linker (/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) supports shared libraries... yes
1205:info:configure checking for /usr/bin/g++-4.2 option to produce PIC... -fno-common -DPIC
1206:info:configure checking if /usr/bin/g++-4.2 PIC flag -fno-common -DPIC works... yes
1207:info:configure checking if /usr/bin/g++-4.2 static flag -static works... no
1208:info:configure checking if /usr/bin/g++-4.2 supports -c -o file.o... yes
1209:info:configure checking if /usr/bin/g++-4.2 supports -c -o file.o... (cached) yes
1210:info:configure checking whether the /usr/bin/g++-4.2 linker (/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) supports shared libraries... yes
1211:info:configure checking dynamic linker characteristics... darwin10.8.0 dyld
1212:info:configure checking how to hardcode library paths into programs... immediate
1213:info:configure checking for library containing strerror... none required
1214:info:configure checking for /usr/bin/gcc-4.2 option to accept ISO C99... -std=gnu99
1215:info:configure checking for /usr/bin/gcc-4.2 -std=gnu99 option to accept ISO Standard C... (cached) -std=gnu99
1216:info:configure checking whether we are using the GNU C++ compiler... (cached) yes
1217:info:configure checking whether /usr/bin/g++-4.2 accepts -g... (cached) yes
1218:info:configure checking dependency style of /usr/bin/g++-4.2... (cached) gcc3
1219:info:configure checking for pkg-config... /opt/local/bin/pkg-config
1220:info:configure checking pkg-config is at least version 0.9.0... yes
1221:info:configure checking for the pthreads library -lpthreads... no
1222:info:configure checking whether pthreads work without any flags... yes
1223:info:configure checking for joinable pthread attribute... PTHREAD_CREATE_JOINABLE
1224:info:configure checking if more special flags are required for pthreads... -D_THREAD_SAFE
1225:info:configure checking for X... libraries /opt/local/lib, headers /opt/local/include
1226:info:configure checking whether -R must be followed by a space... no
1227:info:configure checking for gethostbyname... yes
1228:info:configure checking for connect... yes
1229:info:configure checking for remove... yes
1230:info:configure checking for shmat... yes
1231:info:configure checking for IceConnectionNumber in -lICE... yes
1232:info:configure checking for dirent.h that defines DIR... yes
1233:info:configure checking for library containing opendir... none required
1234:info:configure checking for stdint.h... (cached) yes
1235:info:configure checking whether gettimeofday is declared... yes
1236:info:configure checking for gettimeofday... yes
1237:info:configure checking for localtime_r... yes
1238:info:configure checking for gmtime_r... yes
1239:info:configure checking for gethostbyname... (cached) yes
1240:info:configure checking for nanosleep... yes
1241:info:configure checking for opj_cio_open in -lopenjpeg... yes
1242:info:configure checking openjpeg.h usability... yes
1243:info:configure checking openjpeg.h presence... yes
1244:info:configure checking for openjpeg.h... yes
1245:info:configure checking for TIFFOpen in -ltiff... yes
1246:info:configure checking tiffio.h usability... yes
1247:info:configure checking tiffio.h presence... yes
1248:info:configure checking for tiffio.h... yes
1249:info:configure checking for popen... yes
1250:info:configure checking for mkstemp... yes
1251:info:configure checking for mkstemps... yes
1252:info:configure checking for special C compiler options needed for large files... no
1253:info:configure checking for _FILE_OFFSET_BITS value needed for large files... no
1254:info:configure checking for _LARGEFILE_SOURCE value needed for large files... no
1255:info:configure checking for fseek64... no
1256:info:configure checking for ftell64... no
1257:info:configure checking for inflate in -lz... yes
1258:info:configure checking zlib.h usability... yes
1259:info:configure checking zlib.h presence... yes
1260:info:configure checking for zlib.h... yes
1261:info:configure checking for LIBCURL... yes
1262:info:configure checking for libjpeg6b... no
1263:info:configure checking for libjpeg... -ljpeg
1264:info:configure checking jpeglib.h usability... yes
1265:info:configure checking jpeglib.h presence... yes
1266:info:configure checking for jpeglib.h... yes
1267:info:configure checking for LIBPNG... yes
1268:info:configure checking for FREETYPE... yes
1269:info:configure checking which font configuration to use... fontconfig
1270:info:configure checking for FONTCONFIG... yes
1271:info:configure checking for CAIRO... yes
1272:info:configure checking fcntl.h usability... yes
1273:info:configure checking fcntl.h presence... yes
1274:info:configure checking for fcntl.h... yes
1275:info:configure checking sys/mman.h usability... yes
1276:info:configure checking sys/mman.h presence... yes
1277:info:configure checking for sys/mman.h... yes
1278:info:configure checking for sys/stat.h... (cached) yes
1279:info:configure checking for POPPLER_GLIB... yes
1280:info:configure checking for gobject-introspection... no (disabled, use --enable-introspection to enable)
1281:info:configure checking for glib-mkenums... /opt/local/bin/glib-mkenums
1282:info:configure checking for gtkdoc-check... /opt/local/bin/gtkdoc-check
1283:info:configure checking for gtkdoc-rebase... /opt/local/bin/gtkdoc-rebase
1284:info:configure checking for gtkdoc-mkpdf... /opt/local/bin/gtkdoc-mkpdf
1285:info:configure checking whether to build gtk-doc documentation... no
1286:info:configure checking for iconv... yes
1287:info:configure checking for working iconv... yes
1288:info:configure checking how to link with libiconv... -liconv
1289:info:configure checking for iconv declaration...
1290:info:configure          extern size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
1291:info:configure checking for GTK_TEST... yes
1292:info:configure checking for LCMS... yes
1293:info:configure configure: creating ./config.status
1294:info:configure config.status: creating Makefile
1295:info:configure config.status: creating goo/Makefile
1296:info:configure config.status: creating fofi/Makefile
1297:info:configure config.status: creating splash/Makefile
1298:info:configure config.status: creating poppler/Makefile
1299:info:configure config.status: creating utils/Makefile
1300:info:configure config.status: creating glib/Makefile
1301:info:configure config.status: creating glib/poppler-features.h
1302:info:configure config.status: creating glib/reference/Makefile
1303:info:configure config.status: creating glib/reference/version.xml
1304:info:configure config.status: creating glib/demo/Makefile
1305:info:configure config.status: creating test/Makefile
1306:info:configure config.status: creating qt4/Makefile
1307:info:configure config.status: creating qt4/src/Makefile
1308:info:configure config.status: creating qt4/tests/Makefile
1309:info:configure config.status: creating qt4/demos/Makefile
1310:info:configure config.status: creating cpp/Makefile
1311:info:configure config.status: creating cpp/poppler-version.h
1312:info:configure config.status: creating cpp/tests/Makefile
1313:info:configure config.status: creating poppler.pc
1314:info:configure config.status: creating poppler-uninstalled.pc
1315:info:configure config.status: creating poppler-cairo.pc
1316:info:configure config.status: creating poppler-cairo-uninstalled.pc
1317:info:configure config.status: creating poppler-splash.pc
1318:info:configure config.status: creating poppler-splash-uninstalled.pc
1319:info:configure config.status: creating poppler-glib.pc
1320:info:configure config.status: creating poppler-glib-uninstalled.pc
1321:info:configure config.status: creating poppler-qt4.pc
1322:info:configure config.status: creating poppler-qt4-uninstalled.pc
1323:info:configure config.status: creating poppler-cpp.pc
1324:info:configure config.status: creating poppler-cpp-uninstalled.pc
1325:info:configure config.status: creating config.h
1326:info:configure config.status: creating poppler/poppler-config.h
1327:info:configure config.status: executing depfiles commands
1328:info:configure config.status: executing libtool commands
1329:info:configure configure: WARNING: unrecognized options: --disable-poppler-qt
1330:info:configure
1331:info:configure Building poppler with support for:
1332:info:configure   font configuration: fontconfig
1333:info:configure   splash output:      yes
1334:info:configure   cairo output:       yes
1335:info:configure   qt4 wrapper:        no
1336:info:configure   glib wrapper:       yes
1337:info:configure     introspection:    no (disabled, use --enable-introspection to enable)
1338:info:configure   cpp wrapper:        yes
1339:info:configure   use gtk-doc:        no
1340:info:configure   use libjpeg:        yes
1341:info:configure   use libpng:         yes
1342:info:configure   use libtiff:        yes
1343:info:configure   use zlib:           yes
1344:info:configure   use libcurl:        yes
1345:info:configure   use libopenjpeg:    yes
1346:info:configure   use cms:            yes
1347:info:configure   command line utils: yes
1348:info:configure
1349:info:configure   Warning: Using zlib is not totally safe
1350:debug:build build phase started at Fri Nov 25 13:17:04 PST 2011
1351:notice:build --->  Building poppler
1352:debug:build Executing org.macports.build (poppler)
1353:debug:build Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6'
1354:debug:build Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1" && /usr/bin/make -j2 -w all'
1355:debug:build Executing command line:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1" && /usr/bin/make -j2 -w all
1356:info:build make: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1'
1357:info:build /usr/bin/make  all-recursive
1358:info:build make[1]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1'
1359:info:build Making all in goo
1360:info:build make[2]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1/goo'
1361:info:build   CXX    gmempp.lo
1362:info:build   CXX    gfile.lo
1363:info:build   CXX    GooHash.lo
1364:info:build   CXX    GooList.lo
1365:info:build   CXX    GooTimer.lo
1366:info:build   CXX    GooString.lo
1367:info:build   CXX    gmem.lo
1368:info:build   CXX    FixedPoint.lo
1369:info:build   CXX    PNGWriter.lo
1370:info:build   CXX    JpegWriter.lo
1371:info:build   CXX    TiffWriter.lo
1372:info:build   CXX    ImgWriter.lo
1373:info:build   CXX    gstrtod.lo
1374:info:build   CXXLD  libgoo.la
1375:info:build /usr/bin/ranlib: file: .libs/libgoo.a(gmempp.o) has no symbols
1376:info:build /usr/bin/ranlib: file: .libs/libgoo.a(FixedPoint.o) has no symbols
1377:info:build ranlib: file: .libs/libgoo.a(gmempp.o) has no symbols
1378:info:build ranlib: file: .libs/libgoo.a(FixedPoint.o) has no symbols
1379:info:build make[2]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1/goo'
1380:info:build Making all in fofi
1381:info:build make[2]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1/fofi'
1382:info:build   CXX    FoFiEncodings.lo
1383:info:build   CXX    FoFiBase.lo
1384:info:build   CXX    FoFiTrueType.lo
1385:info:build   CXX    FoFiType1.lo
1386:info:build   CXX    FoFiType1C.lo
1387:info:build   CXXLD  libfofi.la
1388:info:build make[2]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1/fofi'
1389:info:build Making all in splash
1390:info:build make[2]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1/splash'
1391:info:build   CXX    Splash.lo
1392:info:build   CXX    SplashBitmap.lo
1393:info:build   CXX    SplashClip.lo
1394:info:build   CXX    SplashFTFont.lo
1395:info:build   CXX    SplashFTFontEngine.lo
1396:info:build   CXX    SplashFTFontFile.lo
1397:info:build   CXX    SplashFont.lo
1398:info:build   CXX    SplashFontEngine.lo
1399:info:build   CXX    SplashFontFile.lo
1400:info:build   CXX    SplashFontFileID.lo
1401:info:build   CXX    SplashPath.lo
1402:info:build   CXX    SplashPattern.lo
1403:info:build   CXX    SplashScreen.lo
1404:info:build   CXX    SplashState.lo
1405:info:build   CXX    SplashT1Font.lo
1406:info:build   CXX    SplashT1FontEngine.lo
1407:info:build   CXX    SplashT1FontFile.lo
1408:info:build   CXX    SplashXPath.lo
1409:info:build   CXX    SplashXPathScanner.lo
1410:info:build   CXXLD  libsplash.la
1411:info:build /usr/bin/ranlib: file: .libs/libsplash.a(SplashT1Font.o) has no symbols
1412:info:build /usr/bin/ranlib: file: .libs/libsplash.a(SplashT1FontEngine.o) has no symbols
1413:info:build /usr/bin/ranlib: file: .libs/libsplash.a(SplashT1FontFile.o) has no symbols
1414:info:build ranlib: file: .libs/libsplash.a(SplashT1Font.o) has no symbols
1415:info:build ranlib: file: .libs/libsplash.a(SplashT1FontEngine.o) has no symbols
1416:info:build ranlib: file: .libs/libsplash.a(SplashT1FontFile.o) has no symbols
1417:info:build make[2]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1/splash'
1418:info:build Making all in poppler
1419:info:build make[2]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1/poppler'
1420:info:build /usr/bin/make  all-am
1421:info:build make[3]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1/poppler'
1422:info:build   CXX    SplashOutputDev.lo
1423:info:build   CXX    DCTStream.lo
1424:info:build   CXX    FlateStream.lo
1425:info:build   CXX    JPEG2000Stream.lo
1426:info:build   CXX    CurlCachedFile.lo
1427:info:build   CXX    CurlPDFDocBuilder.lo
1428:info:build   CXX    Annot.lo
1429:info:build   CXX    Array.lo
1430:info:build   CXX    BuiltinFont.lo
1431:info:build   CXX    BuiltinFontTables.lo
1432:info:build   CXX    CachedFile.lo
1433:info:build   CXX    Catalog.lo
1434:info:build   CXX    CharCodeToUnicode.lo
1435:info:build   CXX    CMap.lo
1436:info:build   CXX    DateInfo.lo
1437:info:build   CXX    Decrypt.lo
1438:info:build   CXX    Dict.lo
1439:info:build   CXX    Error.lo
1440:info:build   CXX    FileSpec.lo
1441:info:build   CXX    FontEncodingTables.lo
1442:info:build   CXX    Form.lo
1443:info:build   CXX    FontInfo.lo
1444:info:build   CXX    Function.lo
1445:info:build   CXX    Gfx.lo
1446:info:build   CXX    GfxFont.lo
1447:info:build   CXX    GfxState.lo
1448:info:build   CXX    GlobalParams.lo
1449:info:build   CXX    Hints.lo
1450:info:build   CXX    JArithmeticDecoder.lo
1451:info:build   CXX    JBIG2Stream.lo
1452:info:build   CXX    Lexer.lo
1453:info:build   CXX    Linearization.lo
1454:info:build   CXX    Link.lo
1455:info:build   CXX    LocalPDFDocBuilder.lo
1456:info:build   CXX    Movie.lo
1457:info:build   CXX    NameToCharCode.lo
1458:info:build   CXX    Object.lo
1459:info:build   CXX    OptionalContent.lo
1460:info:build   CXX    Outline.lo
1461:info:build   CXX    OutputDev.lo
1462:info:build   CXX    Page.lo
1463:info:build   CXX    PageTransition.lo
1464:info:build   CXX    Parser.lo
1465:info:build   CXX    PDFDoc.lo
1466:info:build   CXX    PDFDocEncoding.lo
1467:info:build   CXX    PDFDocFactory.lo
1468:info:build   CXX    PopplerCache.lo
1469:info:build   CXX    ProfileData.lo
1470:info:build   CXX    PreScanOutputDev.lo
1471:info:build   CXX    PSTokenizer.lo
1472:info:build   CXX    Rendition.lo
1473:info:build   CXX    StdinCachedFile.lo
1474:info:build   CXX    StdinPDFDocBuilder.lo
1475:info:build   CXX    Stream.lo
1476:info:build   CXX    strtok_r.lo
1477:info:build   CXX    UnicodeMap.lo
1478:info:build   CXX    UnicodeTypeTable.lo
1479:info:build   CXX    ViewerPreferences.lo
1480:info:build   CXX    XRef.lo
1481:info:build   CXX    PSOutputDev.lo
1482:info:build   CXX    TextOutputDev.lo
1483:info:build   CXX    PageLabelInfo.lo
1484:info:build   CXX    SecurityHandler.lo
1485:info:build   CXX    Sound.lo
1486:info:build   CXX    XpdfPluginAPI.lo
1487:info:build   CXX    CairoFontEngine.lo
1488:info:build   CXX    CairoOutputDev.lo
1489:info:build   CXX    CairoRescaleBox.lo
1490:info:build UTF8.h:59: warning: 'int mapUCS2(Unicode, char*, int)' defined but not used
1491:info:build   CXXLD  libpoppler.la
1492:info:build   CXXLD  libpoppler-cairo.la
1493:info:build /usr/bin/ranlib: file: .libs/libpoppler.a(strtok_r.o) has no symbols
1494:info:build /usr/bin/ranlib: file: .libs/libpoppler.a(XpdfPluginAPI.o) has no symbols
1495:info:build /usr/bin/ranlib: file: .libs/libpoppler.a(FixedPoint.o) has no symbols
1496:info:build /usr/bin/ranlib: file: .libs/libpoppler.a(gmempp.o) has no symbols
1497:info:build /usr/bin/ranlib: file: .libs/libpoppler.a(SplashT1Font.o) has no symbols
1498:info:build /usr/bin/ranlib: file: .libs/libpoppler.a(SplashT1FontEngine.o) has no symbols
1499:info:build /usr/bin/ranlib: file: .libs/libpoppler.a(SplashT1FontFile.o) has no symbols
1500:info:build ranlib: file: .libs/libpoppler.a(strtok_r.o) has no symbols
1501:info:build ranlib: file: .libs/libpoppler.a(XpdfPluginAPI.o) has no symbols
1502:info:build ranlib: file: .libs/libpoppler.a(FixedPoint.o) has no symbols
1503:info:build ranlib: file: .libs/libpoppler.a(gmempp.o) has no symbols
1504:info:build ranlib: file: .libs/libpoppler.a(SplashT1Font.o) has no symbols
1505:info:build ranlib: file: .libs/libpoppler.a(SplashT1FontEngine.o) has no symbols
1506:info:build ranlib: file: .libs/libpoppler.a(SplashT1FontFile.o) has no symbols
1507:info:build make[3]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1/poppler'
1508:info:build make[2]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1/poppler'
1509:info:build Making all in utils
1510:info:build make[2]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1/utils'
1511:info:build   CXX    pdffonts.o
1512:info:build   CXX    parseargs.o
1513:info:build   CXX    pdfimages.o
1514:info:build   CXX    ImageOutputDev.o
1515:info:build   CXX    pdfinfo.o
1516:info:build   CXX    printencodings.o
1517:info:build   CXX    pdftops.o
1518:info:build   CXX    pdftotext.o
1519:info:build   CXX    pdftohtml.o
1520:info:build   CXX    HtmlFonts.o
1521:info:build   CXX    HtmlLinks.o
1522:info:build   CXX    HtmlOutputDev.o
1523:info:build   CXX    pdfseparate.o
1524:info:build   CXX    pdfunite.o
1525:info:build   CXX    pdftoppm.o
1526:info:build   CXX    pdftocairo.o
1527:info:build   CXXLD  pdffonts
1528:info:build   CXXLD  pdfimages
1529:info:build   CXXLD  pdfinfo
1530:info:build   CXXLD  pdftops
1531:info:build   CXXLD  pdftotext
1532:info:build   CXXLD  pdftohtml
1533:info:build   CXXLD  pdfseparate
1534:info:build   CXXLD  pdfunite
1535:info:build   CXXLD  pdftoppm
1536:info:build   CXXLD  pdftocairo
1537:info:build make[2]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1/utils'
1538:info:build Making all in glib
1539:info:build make[2]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1/glib'
1540:info:build   GEN    stamp-poppler-enums.h
1541:info:build /usr/bin/make  all-recursive
1542:info:build make[3]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1/glib'
1543:info:build Making all in .
1544:info:build make[4]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1/glib'
1545:info:build   CXX    poppler-action.lo
1546:info:build   CC     poppler-enums.lo
1547:info:build   CXX    poppler-date.lo
1548:info:build   CXX    poppler-document.lo
1549:info:build   CXX    poppler-page.lo
1550:info:build   CXX    poppler-attachment.lo
1551:info:build   CXX    poppler-form-field.lo
1552:info:build   CXX    poppler-annot.lo
1553:info:build   CXX    poppler-layer.lo
1554:info:build   CXX    poppler-media.lo
1555:info:build   CXX    poppler-movie.lo
1556:info:build   CXX    poppler.lo
1557:info:build   CXXLD  libpoppler-glib.la
1558:info:build make[4]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1/glib'
1559:info:build Making all in reference
1560:info:build make[4]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1/glib/reference'
1561:info:build make[4]: Nothing to be done for `all'.
1562:info:build make[4]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1/glib/reference'
1563:info:build Making all in demo
1564:info:build make[4]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1/glib/demo'
1565:info:build   CC     main.o
1566:info:build   CC     annots.o
1567:info:build In file included from /opt/local/include/gdk-pixbuf-2.0/gdk-pixbuf/gdk-pixbuf.h:35,
1568:info:build                  from /opt/local/include/gtk-2.0/gdk/gdkpixbuf.h:37,
1569:info:build                  from /opt/local/include/gtk-2.0/gdk/gdkcairo.h:28,
1570:info:build                  from /opt/local/include/gtk-2.0/gdk/gdk.h:33,
1571:info:build                  from /opt/local/include/gtk-2.0/gtk/gtk.h:32,
1572:info:build                  from main.c:19:
1573:info:build /opt/local/include/gdk-pixbuf-2.0/gdk-pixbuf/gdk-pixbuf-core.h:260: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’
1574:info:build In file included from /opt/local/include/gdk-pixbuf-2.0/gdk-pixbuf/gdk-pixbuf.h:35,
1575:info:build                  from /opt/local/include/gtk-2.0/gdk/gdkpixbuf.h:37,
1576:info:build                  from /opt/local/include/gtk-2.0/gdk/gdkcairo.h:28,
1577:info:build                  from /opt/local/include/gtk-2.0/gdk/gdk.h:33,
1578:info:build                  from /opt/local/include/gtk-2.0/gtk/gtk.h:32,
1579:info:build                  from annots.c:19:
1580:info:build /opt/local/include/gdk-pixbuf-2.0/gdk-pixbuf/gdk-pixbuf-core.h:260: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’
1581:info:build In file included from /opt/local/include/atk-1.0/atk/atkobject.h:28,
1582:info:build                  from /opt/local/include/atk-1.0/atk/atk.h:25,
1583:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkwidget.h:40,
1584:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkcontainer.h:35,
1585:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkbin.h:35,
1586:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkwindow.h:36,
1587:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkdialog.h:35,
1588:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkaboutdialog.h:32,
1589:info:build                  from /opt/local/include/gtk-2.0/gtk/gtk.h:33,
1590:info:build                  from main.c:19:
1591:info:build /opt/local/include/atk-1.0/atk/atkstate.h:173: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’
1592:info:build In file included from /opt/local/include/atk-1.0/atk/atkobject.h:28,
1593:info:build                  from /opt/local/include/atk-1.0/atk/atk.h:25,
1594:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkwidget.h:40,
1595:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkcontainer.h:35,
1596:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkbin.h:35,
1597:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkwindow.h:36,
1598:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkdialog.h:35,
1599:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkaboutdialog.h:32,
1600:info:build                  from /opt/local/include/gtk-2.0/gtk/gtk.h:33,
1601:info:build                  from annots.c:19:
1602:info:build /opt/local/include/atk-1.0/atk/atkstate.h:173: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’
1603:info:build In file included from /opt/local/include/atk-1.0/atk/atk.h:25,
1604:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkwidget.h:40,
1605:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkcontainer.h:35,
1606:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkbin.h:35,
1607:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkwindow.h:36,
1608:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkdialog.h:35,
1609:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkaboutdialog.h:32,
1610:info:build                  from /opt/local/include/gtk-2.0/gtk/gtk.h:33,
1611:info:build                  from main.c:19:
1612:info:build /opt/local/include/atk-1.0/atk/atkobject.h:384: error: expected specifier-qualifier-list before ‘G_CONST_RETURN’
1613:info:build In file included from /opt/local/include/atk-1.0/atk/atk.h:25,
1614:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkwidget.h:40,
1615:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkcontainer.h:35,
1616:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkbin.h:35,
1617:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkwindow.h:36,
1618:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkdialog.h:35,
1619:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkaboutdialog.h:32,
1620:info:build                  from /opt/local/include/gtk-2.0/gtk/gtk.h:33,
1621:info:build                  from annots.c:19:
1622:info:build /opt/local/include/atk-1.0/atk/atkobject.h:384: error: expected specifier-qualifier-list before ‘G_CONST_RETURN’
1623:info:build /opt/local/include/atk-1.0/atk/atkobject.h:538: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’
1624:info:build /opt/local/include/atk-1.0/atk/atkobject.h:539: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’
1625:info:build /opt/local/include/atk-1.0/atk/atkobject.h:538: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’
1626:info:build /opt/local/include/atk-1.0/atk/atkobject.h:539: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’
1627:info:build /opt/local/include/atk-1.0/atk/atkobject.h:574: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’
1628:info:build /opt/local/include/atk-1.0/atk/atkobject.h:574: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’
1629:info:build /opt/local/include/atk-1.0/atk/atkobject.h:585: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’
1630:info:build /opt/local/include/atk-1.0/atk/atkobject.h:585: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’
1631:info:build In file included from /opt/local/include/atk-1.0/atk/atk.h:26,
1632:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkwidget.h:40,
1633:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkcontainer.h:35,
1634:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkbin.h:35,
1635:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkwindow.h:36,
1636:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkdialog.h:35,
1637:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkaboutdialog.h:32,
1638:info:build                  from /opt/local/include/gtk-2.0/gtk/gtk.h:33,
1639:info:build                  from main.c:19:
1640:info:build /opt/local/include/atk-1.0/atk/atkaction.h:58: error: expected specifier-qualifier-list before ‘G_CONST_RETURN’
1641:info:build /opt/local/include/atk-1.0/atk/atkaction.h:88: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’
1642:info:build /opt/local/include/atk-1.0/atk/atkaction.h:90: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’
1643:info:build /opt/local/include/atk-1.0/atk/atkaction.h:92: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’
1644:info:build /opt/local/include/atk-1.0/atk/atkaction.h:100: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’
1645:info:build In file included from /opt/local/include/atk-1.0/atk/atkcomponent.h:28,
1646:info:build                  from /opt/local/include/atk-1.0/atk/atk.h:27,
1647:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkwidget.h:40,
1648:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkcontainer.h:35,
1649:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkbin.h:35,
1650:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkwindow.h:36,
1651:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkdialog.h:35,
1652:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkaboutdialog.h:32,
1653:info:build                  from /opt/local/include/gtk-2.0/gtk/gtk.h:33,
1654:info:build                  from main.c:19:
1655:info:build /opt/local/include/atk-1.0/atk/atkutil.h:150: error: expected specifier-qualifier-list before ‘G_CONST_RETURN’
1656:info:build /opt/local/include/atk-1.0/atk/atkutil.h:232: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’
1657:info:build /opt/local/include/atk-1.0/atk/atkutil.h:237: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’
1658:info:build /opt/local/include/atk-1.0/atk/atkutil.h:242: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’
1659:info:build In file included from /opt/local/include/atk-1.0/atk/atk.h:28,
1660:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkwidget.h:40,
1661:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkcontainer.h:35,
1662:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkbin.h:35,
1663:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkwindow.h:36,
1664:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkdialog.h:35,
1665:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkaboutdialog.h:32,
1666:info:build                  from /opt/local/include/gtk-2.0/gtk/gtk.h:33,
1667:info:build                  from main.c:19:
1668:info:build /opt/local/include/atk-1.0/atk/atkdocument.h:52: error: expected specifier-qualifier-list before ‘G_CONST_RETURN’
1669:info:build In file included from /opt/local/include/atk-1.0/atk/atk.h:26,
1670:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkwidget.h:40,
1671:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkcontainer.h:35,
1672:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkbin.h:35,
1673:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkwindow.h:36,
1674:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkdialog.h:35,
1675:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkaboutdialog.h:32,
1676:info:build                  from /opt/local/include/gtk-2.0/gtk/gtk.h:33,
1677:info:build                  from annots.c:19:
1678:info:build /opt/local/include/atk-1.0/atk/atkaction.h:58: error: expected specifier-qualifier-list before ‘G_CONST_RETURN’
1679:info:build /opt/local/include/atk-1.0/atk/atkaction.h:88: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’
1680:info:build /opt/local/include/atk-1.0/atk/atkaction.h:90: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’
1681:info:build /opt/local/include/atk-1.0/atk/atkaction.h:92: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’
1682:info:build /opt/local/include/atk-1.0/atk/atkaction.h:100: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’
1683:info:build /opt/local/include/atk-1.0/atk/atkdocument.h:71: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’
1684:info:build /opt/local/include/atk-1.0/atk/atkdocument.h:73: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’
1685:info:build /opt/local/include/atk-1.0/atk/atkdocument.h:75: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’
1686:info:build In file included from /opt/local/include/atk-1.0/atk/atkeditabletext.h:28,
1687:info:build                  from /opt/local/include/atk-1.0/atk/atk.h:29,
1688:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkwidget.h:40,
1689:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkcontainer.h:35,
1690:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkbin.h:35,
1691:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkwindow.h:36,
1692:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkdialog.h:35,
1693:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkaboutdialog.h:32,
1694:info:build                  from /opt/local/include/gtk-2.0/gtk/gtk.h:33,
1695:info:build                  from main.c:19:
1696:info:build /opt/local/include/atk-1.0/atk/atktext.h:358: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’
1697:info:build /opt/local/include/atk-1.0/atk/atktext.h:360: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’
1698:info:build In file included from /opt/local/include/atk-1.0/atk/atk.h:34,
1699:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkwidget.h:40,
1700:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkcontainer.h:35,
1701:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkbin.h:35,
1702:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkwindow.h:36,
1703:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkdialog.h:35,
1704:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkaboutdialog.h:32,
1705:info:build                  from /opt/local/include/gtk-2.0/gtk/gtk.h:33,
1706:info:build                  from main.c:19:
1707:info:build /opt/local/include/atk-1.0/atk/atkimage.h:56: error: expected specifier-qualifier-list before ‘G_CONST_RETURN’
1708:info:build /opt/local/include/atk-1.0/atk/atkimage.h:70: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’
1709:info:build /opt/local/include/atk-1.0/atk/atkimage.h:83: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’
1710:info:build In file included from /opt/local/include/atk-1.0/atk/atk.h:40,
1711:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkwidget.h:40,
1712:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkcontainer.h:35,
1713:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkbin.h:35,
1714:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkwindow.h:36,
1715:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkdialog.h:35,
1716:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkaboutdialog.h:32,
1717:info:build                  from /opt/local/include/gtk-2.0/gtk/gtk.h:33,
1718:info:build                  from main.c:19:
1719:info:build /opt/local/include/atk-1.0/atk/atkrelation.h:64: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’
1720:info:build In file included from /opt/local/include/atk-1.0/atk/atk.h:47,
1721:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkwidget.h:40,
1722:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkcontainer.h:35,
1723:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkbin.h:35,
1724:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkwindow.h:36,
1725:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkdialog.h:35,
1726:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkaboutdialog.h:32,
1727:info:build                  from /opt/local/include/gtk-2.0/gtk/gtk.h:33,
1728:info:build                  from main.c:19:
1729:info:build /opt/local/include/atk-1.0/atk/atkstreamablecontent.h:61: error: expected specifier-qualifier-list before ‘G_CONST_RETURN’
1730:info:build /opt/local/include/atk-1.0/atk/atkstreamablecontent.h:95: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’
1731:info:build In file included from /opt/local/include/atk-1.0/atk/atk.h:48,
1732:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkwidget.h:40,
1733:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkcontainer.h:35,
1734:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkbin.h:35,
1735:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkwindow.h:36,
1736:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkdialog.h:35,
1737:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkaboutdialog.h:32,
1738:info:build                  from /opt/local/include/gtk-2.0/gtk/gtk.h:33,
1739:info:build                  from main.c:19:
1740:info:build /opt/local/include/atk-1.0/atk/atktable.h:72: error: expected specifier-qualifier-list before ‘G_CONST_RETURN’
1741:info:build /opt/local/include/atk-1.0/atk/atktable.h:166: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’
1742:info:build /opt/local/include/atk-1.0/atk/atktable.h:171: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’
1743:info:build In file included from /opt/local/include/atk-1.0/atk/atkcomponent.h:28,
1744:info:build                  from /opt/local/include/atk-1.0/atk/atk.h:27,
1745:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkwidget.h:40,
1746:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkcontainer.h:35,
1747:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkbin.h:35,
1748:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkwindow.h:36,
1749:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkdialog.h:35,
1750:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkaboutdialog.h:32,
1751:info:build                  from /opt/local/include/gtk-2.0/gtk/gtk.h:33,
1752:info:build                  from annots.c:19:
1753:info:build /opt/local/include/atk-1.0/atk/atkutil.h:150: error: expected specifier-qualifier-list before ‘G_CONST_RETURN’
1754:info:build /opt/local/include/atk-1.0/atk/atkutil.h:232: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’
1755:info:build /opt/local/include/atk-1.0/atk/atkutil.h:237: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’
1756:info:build /opt/local/include/atk-1.0/atk/atkutil.h:242: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’
1757:info:build In file included from /opt/local/include/atk-1.0/atk/atk.h:28,
1758:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkwidget.h:40,
1759:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkcontainer.h:35,
1760:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkbin.h:35,
1761:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkwindow.h:36,
1762:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkdialog.h:35,
1763:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkaboutdialog.h:32,
1764:info:build                  from /opt/local/include/gtk-2.0/gtk/gtk.h:33,
1765:info:build                  from annots.c:19:
1766:info:build /opt/local/include/atk-1.0/atk/atkdocument.h:52: error: expected specifier-qualifier-list before ‘G_CONST_RETURN’
1767:info:build /opt/local/include/atk-1.0/atk/atkdocument.h:71: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’
1768:info:build /opt/local/include/atk-1.0/atk/atkdocument.h:73: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’
1769:info:build /opt/local/include/atk-1.0/atk/atkdocument.h:75: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’
1770:info:build In file included from /opt/local/include/atk-1.0/atk/atkeditabletext.h:28,
1771:info:build                  from /opt/local/include/atk-1.0/atk/atk.h:29,
1772:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkwidget.h:40,
1773:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkcontainer.h:35,
1774:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkbin.h:35,
1775:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkwindow.h:36,
1776:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkdialog.h:35,
1777:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkaboutdialog.h:32,
1778:info:build                  from /opt/local/include/gtk-2.0/gtk/gtk.h:33,
1779:info:build                  from annots.c:19:
1780:info:build /opt/local/include/atk-1.0/atk/atktext.h:358: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’
1781:info:build /opt/local/include/atk-1.0/atk/atktext.h:360: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’
1782:info:build In file included from /opt/local/include/atk-1.0/atk/atk.h:34,
1783:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkwidget.h:40,
1784:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkcontainer.h:35,
1785:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkbin.h:35,
1786:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkwindow.h:36,
1787:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkdialog.h:35,
1788:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkaboutdialog.h:32,
1789:info:build                  from /opt/local/include/gtk-2.0/gtk/gtk.h:33,
1790:info:build                  from annots.c:19:
1791:info:build /opt/local/include/atk-1.0/atk/atkimage.h:56: error: expected specifier-qualifier-list before ‘G_CONST_RETURN’
1792:info:build /opt/local/include/atk-1.0/atk/atkimage.h:70: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’
1793:info:build /opt/local/include/atk-1.0/atk/atkimage.h:83: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’
1794:info:build In file included from /opt/local/include/atk-1.0/atk/atk.h:40,
1795:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkwidget.h:40,
1796:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkcontainer.h:35,
1797:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkbin.h:35,
1798:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkwindow.h:36,
1799:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkdialog.h:35,
1800:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkaboutdialog.h:32,
1801:info:build                  from /opt/local/include/gtk-2.0/gtk/gtk.h:33,
1802:info:build                  from annots.c:19:
1803:info:build /opt/local/include/atk-1.0/atk/atkrelation.h:64: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’
1804:info:build In file included from /opt/local/include/atk-1.0/atk/atk.h:47,
1805:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkwidget.h:40,
1806:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkcontainer.h:35,
1807:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkbin.h:35,
1808:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkwindow.h:36,
1809:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkdialog.h:35,
1810:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkaboutdialog.h:32,
1811:info:build                  from /opt/local/include/gtk-2.0/gtk/gtk.h:33,
1812:info:build                  from annots.c:19:
1813:info:build /opt/local/include/atk-1.0/atk/atkstreamablecontent.h:61: error: expected specifier-qualifier-list before ‘G_CONST_RETURN’
1814:info:build /opt/local/include/atk-1.0/atk/atkstreamablecontent.h:95: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’
1815:info:build In file included from /opt/local/include/atk-1.0/atk/atk.h:48,
1816:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkwidget.h:40,
1817:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkcontainer.h:35,
1818:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkbin.h:35,
1819:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkwindow.h:36,
1820:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkdialog.h:35,
1821:info:build                  from /opt/local/include/gtk-2.0/gtk/gtkaboutdialog.h:32,
1822:info:build                  from /opt/local/include/gtk-2.0/gtk/gtk.h:33,
1823:info:build                  from annots.c:19:
1824:info:build /opt/local/include/atk-1.0/atk/atktable.h:72: error: expected specifier-qualifier-list before ‘G_CONST_RETURN’
1825:info:build /opt/local/include/atk-1.0/atk/atktable.h:166: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’
1826:info:build /opt/local/include/atk-1.0/atk/atktable.h:171: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘gchar’
1827:info:build main.c: In function ‘pgd_demo_get_auth_dialog’:
1828:info:build main.c:183: warning: implicit declaration of function ‘gtk_dialog_set_has_separator’
1829:info:build make[4]: *** [main.o] Error 1
1830:info:build make[4]: *** Waiting for unfinished jobs....
1831:info:build annots.c: In function ‘pgd_annots_add_annot’:
1832:info:build annots.c:669: warning: implicit declaration of function ‘gtk_combo_box_new_text’
1833:info:build annots.c:669: warning: assignment makes pointer from integer without a cast
1834:info:build annots.c:670: warning: implicit declaration of function ‘gtk_combo_box_append_text’
1835:info:build make[4]: *** [annots.o] Error 1
1836:info:build make[4]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1/glib/demo'
1837:info:build make[3]: *** [all-recursive] Error 1
1838:info:build make[3]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1/glib'
1839:info:build make[2]: *** [all] Error 2
1840:info:build make[2]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1/glib'
1841:info:build make[1]: *** [all-recursive] Error 1
1842:info:build make[1]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1'
1843:info:build make: *** [all] Error 2
1844:info:build make: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1'
1845:info:build shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.18.1" && /usr/bin/make -j2 -w all " returned error 2
1846:error:build Target org.macports.build returned: shell command failed (see log for details)
1847:debug:build Backtrace: shell command failed (see log for details)
1848    while executing
1849"command_exec build"
1850    (procedure "portbuild::build_main" line 8)
1851    invoked from within
1852"$procedure $targetname"
1853:info:build Warning: the following items did not execute (for poppler): org.macports.activate org.macports.build org.macports.destroot org.macports.install
1854:notice:build Log for poppler is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/main.log