Context Navigation

Back to Ticket #38960

Ticket #38960: splint_config.log

File splint_config.log, 64.4 KB (added by cooljeanius (Eric Gallager), 11 years ago)
config.log for splint

Line
1	This file contains any messages produced by compilers while
2	running configure, to aid debugging if configure makes a mistake.
3
4	It was created by Splint configure 3.1.2, which was
5	generated by GNU Autoconf 2.59. Invocation command line was
6
7	$ ./configure --prefix=/opt/local --disable-dependency-tracking --infodir=/opt/local/share/info --mandir=/opt/local/share/man
8
9	## --------- ##
10	## Platform. ##
11	## --------- ##
12
13	hostname = gl00b05046.cats.gwu.edu
14	uname -m = x86_64
15	uname -r = 12.3.0
16	uname -s = Darwin
17	uname -v = Darwin Kernel Version 12.3.0: Sun Jan 6 22:37:10 PST 2013; root:xnu-2050.22.13~1/RELEASE_X86_64
18
19	/usr/bin/uname -p = i386
20	/bin/uname -X = unknown
21
22	/bin/arch = unknown
23	/usr/bin/arch -k = unknown
24	/usr/convex/getsysinfo = unknown
25	hostinfo = Mach kernel version:
26	Darwin Kernel Version 12.3.0: Sun Jan 6 22:37:10 PST 2013; root:xnu-2050.22.13~1/RELEASE_X86_64
27	Kernel configured for up to 4 processors.
28	4 processors are physically available.
29	4 processors are logically available.
30	Processor type: i486 (Intel 80486)
31	Processors active: 0 1 2 3
32	Primary memory available: 4.00 gigabytes
33	Default processor set: 150 tasks, 861 threads, 4 processors
34	Load average: 1.14, Mach factor: 2.87
35	/bin/machine = unknown
36	/usr/bin/oslevel = unknown
37	/bin/universe = unknown
38
39	PATH: /opt/local/bin
40	PATH: /opt/local/sbin
41	PATH: /bin
42	PATH: /sbin
43	PATH: /usr/bin
44	PATH: /usr/sbin
45
46
47	## ----------- ##
48	## Core tests. ##
49	## ----------- ##
50
51	configure:1321: checking build system type
52	configure:1339: result: i386-apple-darwin12.3.0
53	configure:1347: checking host system type
54	configure:1361: result: i386-apple-darwin12.3.0
55	configure:1369: checking target system type
56	configure:1383: result: i386-apple-darwin12.3.0
57	configure:1412: checking for a BSD-compatible install
58	configure:1467: result: /usr/bin/install -c
59	configure:1478: checking whether build environment is sane
60	configure:1521: result: yes
61	configure:1554: checking for gawk
62	configure:1570: found /opt/local/bin/gawk
63	configure:1580: result: gawk
64	configure:1590: checking whether make sets $(MAKE)
65	configure:1610: result: yes
66	configure:1806: checking for gcc
67	configure:1832: result: /usr/bin/clang
68	configure:2076: checking for C compiler version
69	configure:2079: /usr/bin/clang --version </dev/null >&5
70	Apple LLVM version 4.2 (clang-425.0.28) (based on LLVM 3.2svn)
71	Target: x86_64-apple-darwin12.3.0
72	Thread model: posix
73	configure:2082: $? = 0
74	configure:2084: /usr/bin/clang -v </dev/null >&5
75	Apple LLVM version 4.2 (clang-425.0.28) (based on LLVM 3.2svn)
76	Target: x86_64-apple-darwin12.3.0
77	Thread model: posix
78	configure:2087: $? = 0
79	configure:2089: /usr/bin/clang -V </dev/null >&5
80	clang: error: argument to '-V' is missing (expected 1 value)
81	clang: error: no input files
82	configure:2092: $? = 1
83	configure:2115: checking for C compiler default output file name
84	configure:2118: /usr/bin/clang -pipe -O2 -arch x86_64 -arch i386 -I/opt/local/include -L/opt/local/lib -arch x86_64 -arch i386 conftest.c >&5
85	configure:2121: $? = 0
86	configure:2167: result: a.out
87	configure:2172: checking whether the C compiler works
88	configure:2178: ./a.out
89	configure:2181: $? = 0
90	configure:2198: result: yes
91	configure:2205: checking whether we are cross compiling
92	configure:2207: result: no
93	configure:2210: checking for suffix of executables
94	configure:2212: /usr/bin/clang -o conftest -pipe -O2 -arch x86_64 -arch i386 -I/opt/local/include -L/opt/local/lib -arch x86_64 -arch i386 conftest.c >&5
95	configure:2215: $? = 0
96	configure:2240: result:
97	configure:2246: checking for suffix of object files
98	configure:2267: /usr/bin/clang -c -pipe -O2 -arch x86_64 -arch i386 -I/opt/local/include conftest.c >&5
99	configure:2270: $? = 0
100	configure:2292: result: o
101	configure:2296: checking whether we are using the GNU C compiler
102	configure:2320: /usr/bin/clang -c -pipe -O2 -arch x86_64 -arch i386 -I/opt/local/include conftest.c >&5
103	configure:2326: $? = 0
104	configure:2330: test -z
105	\|\| test ! -s conftest.err
106	configure:2333: $? = 0
107	configure:2336: test -s conftest.o
108	configure:2339: $? = 0
109	configure:2352: result: yes
110	configure:2358: checking whether /usr/bin/clang accepts -g
111	configure:2379: /usr/bin/clang -c -g -I/opt/local/include conftest.c >&5
112	configure:2385: $? = 0
113	configure:2389: test -z
114	\|\| test ! -s conftest.err
115	configure:2392: $? = 0
116	configure:2395: test -s conftest.o
117	configure:2398: $? = 0
118	configure:2409: result: yes
119	configure:2426: checking for /usr/bin/clang option to accept ANSI C
120	configure:2496: /usr/bin/clang -c -pipe -O2 -arch x86_64 -arch i386 -I/opt/local/include conftest.c >&5
121	configure:2502: $? = 0
122	configure:2506: test -z
123	\|\| test ! -s conftest.err
124	configure:2509: $? = 0
125	configure:2512: test -s conftest.o
126	configure:2515: $? = 0
127	configure:2533: result: none needed
128	configure:2551: /usr/bin/clang -c -pipe -O2 -arch x86_64 -arch i386 -I/opt/local/include conftest.c >&5
129	conftest.c:2:3: error: unknown type name 'choke'
130	choke me
131	^
132	conftest.c:2:11: error: expected ';' after top level declarator
133	choke me
134	^
135	;
136	2 errors generated.
137	configure:2557: $? = 1
138	configure: failed program was:
139	\| #ifndef __cplusplus
140	\| choke me
141	\| #endif
142	configure:2709: checking for style of include used by make
143	configure:2737: result: GNU
144	configure:2765: checking dependency style of /usr/bin/clang
145	configure:2827: result: none
146	configure:2837: checking how to run the C preprocessor
147	configure:2872: /usr/bin/clang -E -I/opt/local/include conftest.c
148	configure:2878: $? = 0
149	configure:2910: /usr/bin/clang -E -I/opt/local/include conftest.c
150	conftest.c:9:10: fatal error: 'ac_nonexistent.h' file not found
151	#include <ac_nonexistent.h>
152	^
153	1 error generated.
154	configure:2916: $? = 1
155	configure: failed program was:
156	\| /* confdefs.h. */
157	\|
158	\| #define PACKAGE_NAME "Splint"
159	\| #define PACKAGE_TARNAME "splint"
160	\| #define PACKAGE_VERSION "3.1.2"
161	\| #define PACKAGE_STRING "Splint 3.1.2"
162	\| #define PACKAGE_BUGREPORT "splint-bug@splint.org"
163	\| /* end confdefs.h. */
164	\| #include <ac_nonexistent.h>
165	configure:2955: result: /usr/bin/clang -E
166	configure:2979: /usr/bin/clang -E -I/opt/local/include conftest.c
167	configure:2985: $? = 0
168	configure:3017: /usr/bin/clang -E -I/opt/local/include conftest.c
169	conftest.c:9:10: fatal error: 'ac_nonexistent.h' file not found
170	#include <ac_nonexistent.h>
171	^
172	1 error generated.
173	configure:3023: $? = 1
174	configure: failed program was:
175	\| /* confdefs.h. */
176	\|
177	\| #define PACKAGE_NAME "Splint"
178	\| #define PACKAGE_TARNAME "splint"
179	\| #define PACKAGE_VERSION "3.1.2"
180	\| #define PACKAGE_STRING "Splint 3.1.2"
181	\| #define PACKAGE_BUGREPORT "splint-bug@splint.org"
182	\| /* end confdefs.h. */
183	\| #include <ac_nonexistent.h>
184	configure:3071: checking for flex
185	configure:3087: found /usr/bin/flex
186	configure:3097: result: flex
187	configure:3110: checking for yywrap in -lfl
188	configure:3140: /usr/bin/clang -o conftest -pipe -O2 -arch x86_64 -arch i386 -I/opt/local/include -L/opt/local/lib -arch x86_64 -arch i386 conftest.c -lfl >&5
189	ld: library not found for -lfl
190	clang: error: linker command failed with exit code 1 (use -v to see invocation)
191	configure:3146: $? = 1
192	configure: failed program was:
193	\| /* confdefs.h. */
194	\|
195	\| #define PACKAGE_NAME "Splint"
196	\| #define PACKAGE_TARNAME "splint"
197	\| #define PACKAGE_VERSION "3.1.2"
198	\| #define PACKAGE_STRING "Splint 3.1.2"
199	\| #define PACKAGE_BUGREPORT "splint-bug@splint.org"
200	\| /* end confdefs.h. */
201	\|
202	\| /* Override any gcc2 internal prototype to avoid an error. */
203	\| #ifdef __cplusplus
204	\| extern "C"
205	\| #endif
206	\| /* We use char because int might match the return type of a gcc2
207	\| builtin and then its argument prototype would still apply. */
208	\| char yywrap ();
209	\| int
210	\| main ()
211	\| {
212	\| yywrap ();
213	\| ;
214	\| return 0;
215	\| }
216	configure:3172: result: no
217	configure:3177: checking for yywrap in -ll
218	configure:3207: /usr/bin/clang -o conftest -pipe -O2 -arch x86_64 -arch i386 -I/opt/local/include -L/opt/local/lib -arch x86_64 -arch i386 conftest.c -ll >&5
219	ld: warning: ignoring file /usr/lib/libl.a, file was built for archive which is not the architecture being linked (i386): /usr/lib/libl.a
220	Undefined symbols for architecture i386:
221	"_yywrap", referenced from:
222	_main in conftest-4g2lta.o
223	ld: symbol(s) not found for architecture i386
224	clang: error: linker command failed with exit code 1 (use -v to see invocation)
225	configure:3213: $? = 1
226	configure: failed program was:
227	\| /* confdefs.h. */
228	\|
229	\| #define PACKAGE_NAME "Splint"
230	\| #define PACKAGE_TARNAME "splint"
231	\| #define PACKAGE_VERSION "3.1.2"
232	\| #define PACKAGE_STRING "Splint 3.1.2"
233	\| #define PACKAGE_BUGREPORT "splint-bug@splint.org"
234	\| /* end confdefs.h. */
235	\|
236	\| /* Override any gcc2 internal prototype to avoid an error. */
237	\| #ifdef __cplusplus
238	\| extern "C"
239	\| #endif
240	\| /* We use char because int might match the return type of a gcc2
241	\| builtin and then its argument prototype would still apply. */
242	\| char yywrap ();
243	\| int
244	\| main ()
245	\| {
246	\| yywrap ();
247	\| ;
248	\| return 0;
249	\| }
250	configure:3239: result: no
251	configure:3250: checking lex output file root
252	configure:3261: flex conftest.l
253	configure:3264: $? = 0
254	configure:3276: result: lex.yy
255	configure:3281: checking whether yytext is a pointer
256	configure:3297: /usr/bin/clang -o conftest -pipe -O2 -arch x86_64 -arch i386 -I/opt/local/include -L/opt/local/lib -arch x86_64 -arch i386 conftest.c >&5
257	Undefined symbols for architecture x86_64:
258	"_main", referenced from:
259	implicit entry/start for main executable
260	"_yywrap", referenced from:
261	_yylex in conftest-YmkklY.o
262	ld: symbol(s) not found for architecture x86_64
263	clang: error: linker command failed with exit code 1 (use -v to see invocation)
264	configure:3303: $? = 1
265	configure: failed program was:
266	\|
267	\| #line 3 "lex.yy.c"
268	\|
269	\| #define YY_INT_ALIGNED short int
270	\|
271	\| /* A lexical scanner generated by flex */
272	\|
273	\| #define FLEX_SCANNER
274	\| #define YY_FLEX_MAJOR_VERSION 2
275	\| #define YY_FLEX_MINOR_VERSION 5
276	\| #define YY_FLEX_SUBMINOR_VERSION 35
277	\| #if YY_FLEX_SUBMINOR_VERSION > 0
278	\| #define FLEX_BETA
279	\| #endif
280	\|
281	\| /* First, we deal with platform-specific or compiler-specific issues. */
282	\|
283	\| /* begin standard C headers. */
284	\| #include <stdio.h>
285	\| #include <string.h>
286	\| #include <errno.h>
287	\| #include <stdlib.h>
288	\|
289	\| /* end standard C headers. */
290	\|
291	\| /* flex integer type definitions */
292	\|
293	\| #ifndef FLEXINT_H
294	\| #define FLEXINT_H
295	\|
296	\| /* C99 systems have <inttypes.h>. Non-C99 systems may or may not. */
297	\|
298	\| #if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L
299	\|
300	\| /* C99 says to define __STDC_LIMIT_MACROS before including stdint.h,
301	\| * if you want the limit (max/min) macros for int types.
302	\| */
303	\| #ifndef __STDC_LIMIT_MACROS
304	\| #define __STDC_LIMIT_MACROS 1
305	\| #endif
306	\|
307	\| #include <inttypes.h>
308	\| typedef int8_t flex_int8_t;
309	\| typedef uint8_t flex_uint8_t;
310	\| typedef int16_t flex_int16_t;
311	\| typedef uint16_t flex_uint16_t;
312	\| typedef int32_t flex_int32_t;
313	\| typedef uint32_t flex_uint32_t;
314	\| typedef uint64_t flex_uint64_t;
315	\| #else
316	\| typedef signed char flex_int8_t;
317	\| typedef short int flex_int16_t;
318	\| typedef int flex_int32_t;
319	\| typedef unsigned char flex_uint8_t;
320	\| typedef unsigned short int flex_uint16_t;
321	\| typedef unsigned int flex_uint32_t;
322	\| #endif /* ! C99 */
323	\|
324	\| /* Limits of integral types. */
325	\| #ifndef INT8_MIN
326	\| #define INT8_MIN (-128)
327	\| #endif
328	\| #ifndef INT16_MIN
329	\| #define INT16_MIN (-32767-1)
330	\| #endif
331	\| #ifndef INT32_MIN
332	\| #define INT32_MIN (-2147483647-1)
333	\| #endif
334	\| #ifndef INT8_MAX
335	\| #define INT8_MAX (127)
336	\| #endif
337	\| #ifndef INT16_MAX
338	\| #define INT16_MAX (32767)
339	\| #endif
340	\| #ifndef INT32_MAX
341	\| #define INT32_MAX (2147483647)
342	\| #endif
343	\| #ifndef UINT8_MAX
344	\| #define UINT8_MAX (255U)
345	\| #endif
346	\| #ifndef UINT16_MAX
347	\| #define UINT16_MAX (65535U)
348	\| #endif
349	\| #ifndef UINT32_MAX
350	\| #define UINT32_MAX (4294967295U)
351	\| #endif
352	\|
353	\| #endif /* ! FLEXINT_H */
354	\|
355	\| #ifdef __cplusplus
356	\|
357	\| /* The "const" storage-class-modifier is valid. */
358	\| #define YY_USE_CONST
359	\|
360	\| #else /* ! __cplusplus */
361	\|
362	\| /* C99 requires __STDC__ to be defined as 1. */
363	\| #if defined (__STDC__)
364	\|
365	\| #define YY_USE_CONST
366	\|
367	\| #endif /* defined (__STDC__) */
368	\| #endif /* ! __cplusplus */
369	\|
370	\| #ifdef YY_USE_CONST
371	\| #define yyconst const
372	\| #else
373	\| #define yyconst
374	\| #endif
375	\|
376	\| /* Returned upon end-of-file. */
377	\| #define YY_NULL 0
378	\|
379	\| /* Promotes a possibly negative, possibly signed char to an unsigned
380	\| * integer for use as an array index. If the signed char is negative,
381	\| * we want to instead treat it as an 8-bit unsigned char, hence the
382	\| * double cast.
383	\| */
384	\| #define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c)
385	\|
386	\| /* Enter a start condition. This macro really ought to take a parameter,
387	\| * but we do it the disgusting crufty way forced on us by the ()-less
388	\| * definition of BEGIN.
389	\| */
390	\| #define BEGIN (yy_start) = 1 + 2 *
391	\|
392	\| /* Translate the current start state into a value that can be later handed
393	\| * to BEGIN to return to the state. The YYSTATE alias is for lex
394	\| * compatibility.
395	\| */
396	\| #define YY_START (((yy_start) - 1) / 2)
397	\| #define YYSTATE YY_START
398	\|
399	\| /* Action number for EOF rule of a given start state. */
400	\| #define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1)
401	\|
402	\| /* Special action meaning "start processing a new file". */
403	\| #define YY_NEW_FILE yyrestart(yyin )
404	\|
405	\| #define YY_END_OF_BUFFER_CHAR 0
406	\|
407	\| /* Size of default input buffer. */
408	\| #ifndef YY_BUF_SIZE
409	\| #define YY_BUF_SIZE 16384
410	\| #endif
411	\|
412	\| /* The state buf must be large enough to hold one state per character in the main buffer.
413	\| */
414	\| #define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type))
415	\|
416	\| #ifndef YY_TYPEDEF_YY_BUFFER_STATE
417	\| #define YY_TYPEDEF_YY_BUFFER_STATE
418	\| typedef struct yy_buffer_state *YY_BUFFER_STATE;
419	\| #endif
420	\|
421	\| #ifndef YY_TYPEDEF_YY_SIZE_T
422	\| #define YY_TYPEDEF_YY_SIZE_T
423	\| typedef size_t yy_size_t;
424	\| #endif
425	\|
426	\| extern yy_size_t yyleng;
427	\|
428	\| extern FILE yyin, yyout;
429	\|
430	\| #define EOB_ACT_CONTINUE_SCAN 0
431	\| #define EOB_ACT_END_OF_FILE 1
432	\| #define EOB_ACT_LAST_MATCH 2
433	\|
434	\| #define YY_LESS_LINENO(n)
435	\|
436	\| /* Return all but the first "n" matched characters back to the input stream. */
437	\| #define yyless(n) \
438	\| do \
439	\| { \
440	\| /* Undo effects of setting up yytext. */ \
441	\| int yyless_macro_arg = (n); \
442	\| YY_LESS_LINENO(yyless_macro_arg);\
443	\| *yy_cp = (yy_hold_char); \
444	\| YY_RESTORE_YY_MORE_OFFSET \
445	\| (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \
446	\| YY_DO_BEFORE_ACTION; /* set up yytext again */ \
447	\| } \
448	\| while ( 0 )
449	\|
450	\| #define unput(c) yyunput( c, (yytext_ptr) )
451	\|
452	\| #ifndef YY_STRUCT_YY_BUFFER_STATE
453	\| #define YY_STRUCT_YY_BUFFER_STATE
454	\| struct yy_buffer_state
455	\| {
456	\| FILE *yy_input_file;
457	\|
458	\| char yy_ch_buf; / input buffer */
459	\| char yy_buf_pos; / current position in input buffer */
460	\|
461	\| /* Size of input buffer in bytes, not including room for EOB
462	\| * characters.
463	\| */
464	\| yy_size_t yy_buf_size;
465	\|
466	\| /* Number of characters read into yy_ch_buf, not including EOB
467	\| * characters.
468	\| */
469	\| yy_size_t yy_n_chars;
470	\|
471	\| /* Whether we "own" the buffer - i.e., we know we created it,
472	\| * and can realloc() it to grow it, and should free() it to
473	\| * delete it.
474	\| */
475	\| int yy_is_our_buffer;
476	\|
477	\| /* Whether this is an "interactive" input source; if so, and
478	\| * if we're using stdio for input, then we want to use getc()
479	\| * instead of fread(), to make sure we stop fetching input after
480	\| * each newline.
481	\| */
482	\| int yy_is_interactive;
483	\|
484	\| /* Whether we're considered to be at the beginning of a line.
485	\| * If so, '^' rules will be active on the next match, otherwise
486	\| * not.
487	\| */
488	\| int yy_at_bol;
489	\|
490	\| int yy_bs_lineno; /*< The line count. /
491	\| int yy_bs_column; /*< The column count. /
492	\|
493	\| /* Whether to try to fill the input buffer when we reach the
494	\| * end of it.
495	\| */
496	\| int yy_fill_buffer;
497	\|
498	\| int yy_buffer_status;
499	\|
500	\| #define YY_BUFFER_NEW 0
501	\| #define YY_BUFFER_NORMAL 1
502	\| /* When an EOF's been seen but there's still some text to process
503	\| * then we mark the buffer as YY_EOF_PENDING, to indicate that we
504	\| * shouldn't try reading from the input source any more. We might
505	\| * still have a bunch of tokens to match, though, because of
506	\| * possible backing-up.
507	\| *
508	\| * When we actually see the EOF, we change the status to "new"
509	\| * (via yyrestart()), so that the user can continue scanning by
510	\| * just pointing yyin at a new input file.
511	\| */
512	\| #define YY_BUFFER_EOF_PENDING 2
513	\|
514	\| };
515	\| #endif /* !YY_STRUCT_YY_BUFFER_STATE */
516	\|
517	\| /* Stack of input buffers. */
518	\| static size_t yy_buffer_stack_top = 0; /*< index of top of stack. /
519	\| static size_t yy_buffer_stack_max = 0; /*< capacity of stack. /
520	\| static YY_BUFFER_STATE * yy_buffer_stack = 0; /*< Stack as an array. /
521	\|
522	\| /* We provide macros for accessing buffer states in case in the
523	\| * future we want to put the buffer states in a more general
524	\| * "scanner state".
525	\| *
526	\| * Returns the top of the stack, or NULL.
527	\| */
528	\| #define YY_CURRENT_BUFFER ( (yy_buffer_stack) \
529	\| ? (yy_buffer_stack)[(yy_buffer_stack_top)] \
530	\| : NULL)
531	\|
532	\| /* Same as previous macro, but useful when we know that the buffer stack is not
533	\| * NULL or when we need an lvalue. For internal use only.
534	\| */
535	\| #define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)]
536	\|
537	\| /* yy_hold_char holds the character lost when yytext is formed. */
538	\| static char yy_hold_char;
539	\| static yy_size_t yy_n_chars; /* number of characters read into yy_ch_buf */
540	\| yy_size_t yyleng;
541	\|
542	\| /* Points to current character in buffer. */
543	\| static char yy_c_buf_p = (char ) 0;
544	\| static int yy_init = 0; /* whether we need to initialize */
545	\| static int yy_start = 0; /* start state number */
546	\|
547	\| /* Flag which is used to allow yywrap()'s to do buffer switches
548	\| * instead of setting up a fresh yyin. A bit of a hack ...
549	\| */
550	\| static int yy_did_buffer_switch_on_eof;
551	\|
552	\| void yyrestart (FILE *input_file );
553	\| void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer );
554	\| YY_BUFFER_STATE yy_create_buffer (FILE *file,int size );
555	\| void yy_delete_buffer (YY_BUFFER_STATE b );
556	\| void yy_flush_buffer (YY_BUFFER_STATE b );
557	\| void yypush_buffer_state (YY_BUFFER_STATE new_buffer );
558	\| void yypop_buffer_state (void );
559	\|
560	\| static void yyensure_buffer_stack (void );
561	\| static void yy_load_buffer_state (void );
562	\| static void yy_init_buffer (YY_BUFFER_STATE b,FILE *file );
563	\|
564	\| #define YY_FLUSH_BUFFER yy_flush_buffer(YY_CURRENT_BUFFER )
565	\|
566	\| YY_BUFFER_STATE yy_scan_buffer (char *base,yy_size_t size );
567	\| YY_BUFFER_STATE yy_scan_string (yyconst char *yy_str );
568	\| YY_BUFFER_STATE yy_scan_bytes (yyconst char *bytes,yy_size_t len );
569	\|
570	\| void *yyalloc (yy_size_t );
571	\| void yyrealloc (void ,yy_size_t );
572	\| void yyfree (void * );
573	\|
574	\| #define yy_new_buffer yy_create_buffer
575	\|
576	\| #define yy_set_interactive(is_interactive) \
577	\| { \
578	\| if ( ! YY_CURRENT_BUFFER ){ \
579	\| yyensure_buffer_stack (); \
580	\| YY_CURRENT_BUFFER_LVALUE = \
581	\| yy_create_buffer(yyin,YY_BUF_SIZE ); \
582	\| } \
583	\| YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \
584	\| }
585	\|
586	\| #define yy_set_bol(at_bol) \
587	\| { \
588	\| if ( ! YY_CURRENT_BUFFER ){\
589	\| yyensure_buffer_stack (); \
590	\| YY_CURRENT_BUFFER_LVALUE = \
591	\| yy_create_buffer(yyin,YY_BUF_SIZE ); \
592	\| } \
593	\| YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \
594	\| }
595	\|
596	\| #define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol)
597	\|
598	\| /* Begin user sect3 */
599	\|
600	\| typedef unsigned char YY_CHAR;
601	\|
602	\| FILE yyin = (FILE ) 0, yyout = (FILE ) 0;
603	\|
604	\| typedef int yy_state_type;
605	\|
606	\| extern int yylineno;
607	\|
608	\| int yylineno = 1;
609	\|
610	\| extern char *yytext;
611	\| #define yytext_ptr yytext
612	\|
613	\| static yy_state_type yy_get_previous_state (void );
614	\| static yy_state_type yy_try_NUL_trans (yy_state_type current_state );
615	\| static int yy_get_next_buffer (void );
616	\| static void yy_fatal_error (yyconst char msg[] );
617	\|
618	\| /* Done after the current pattern has been matched and before the
619	\| * corresponding action - sets up yytext.
620	\| */
621	\| #define YY_DO_BEFORE_ACTION \
622	\| (yytext_ptr) = yy_bp; \
623	\| yyleng = (yy_size_t) (yy_cp - yy_bp); \
624	\| (yy_hold_char) = *yy_cp; \
625	\| *yy_cp = '\0'; \
626	\| (yy_c_buf_p) = yy_cp;
627	\|
628	\| #define YY_NUM_RULES 1
629	\| #define YY_END_OF_BUFFER 2
630	\| /* This struct is not used in this scanner,
631	\| but its presence is necessary. */
632	\| struct yy_trans_info
633	\| {
634	\| flex_int32_t yy_verify;
635	\| flex_int32_t yy_nxt;
636	\| };
637	\| static yyconst flex_int16_t yy_accept[6] =
638	\| { 0,
639	\| 0, 0, 2, 1, 0
640	\| } ;
641	\|
642	\| static yyconst flex_int32_t yy_ec[256] =
643	\| { 0,
644	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
645	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
646	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
647	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
648	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
649	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
650	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
651	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
652	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
653	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
654	\|
655	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
656	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
657	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
658	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
659	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
660	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
661	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
662	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
663	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
664	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
665	\|
666	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
667	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
668	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
669	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
670	\| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
671	\| 1, 1, 1, 1, 1
672	\| } ;
673	\|
674	\| static yyconst flex_int32_t yy_meta[2] =
675	\| { 0,
676	\| 1
677	\| } ;
678	\|
679	\| static yyconst flex_int16_t yy_base[7] =
680	\| { 0,
681	\| 0, 0, 2, 3, 3, 0
682	\| } ;
683	\|
684	\| static yyconst flex_int16_t yy_def[7] =
685	\| { 0,
686	\| 6, 6, 5, 5, 0, 5
687	\| } ;
688	\|
689	\| static yyconst flex_int16_t yy_nxt[5] =
690	\| { 0,
691	\| 4, 5, 3, 5
692	\| } ;
693	\|
694	\| static yyconst flex_int16_t yy_chk[5] =
695	\| { 0,
696	\| 6, 3, 5, 5
697	\| } ;
698	\|
699	\| static yy_state_type yy_last_accepting_state;
700	\| static char *yy_last_accepting_cpos;
701	\|
702	\| extern int yy_flex_debug;
703	\| int yy_flex_debug = 0;
704	\|
705	\| /* The intent behind this definition is that it'll catch
706	\| * any uses of REJECT which flex missed.
707	\| */
708	\| #define REJECT reject_used_but_not_detected
709	\| #define yymore() yymore_used_but_not_detected
710	\| #define YY_MORE_ADJ 0
711	\| #define YY_RESTORE_YY_MORE_OFFSET
712	\| char *yytext;
713	\| #line 1 "conftest.l"
714	\| #line 450 "lex.yy.c"
715	\|
716	\| #define INITIAL 0
717	\|
718	\| #ifndef YY_NO_UNISTD_H
719	\| /* Special case for "unistd.h", since it is non-ANSI. We include it way
720	\| * down here because we want the user's section 1 to have been scanned first.
721	\| * The user has a chance to override it with an option.
722	\| */
723	\| #include <unistd.h>
724	\| #endif
725	\|
726	\| #ifndef YY_EXTRA_TYPE
727	\| #define YY_EXTRA_TYPE void *
728	\| #endif
729	\|
730	\| static int yy_init_globals (void );
731	\|
732	\| /* Accessor methods to globals.
733	\| These are made visible to non-reentrant scanners for convenience. */
734	\|
735	\| int yylex_destroy (void );
736	\|
737	\| int yyget_debug (void );
738	\|
739	\| void yyset_debug (int debug_flag );
740	\|
741	\| YY_EXTRA_TYPE yyget_extra (void );
742	\|
743	\| void yyset_extra (YY_EXTRA_TYPE user_defined );
744	\|
745	\| FILE *yyget_in (void );
746	\|
747	\| void yyset_in (FILE * in_str );
748	\|
749	\| FILE *yyget_out (void );
750	\|
751	\| void yyset_out (FILE * out_str );
752	\|
753	\| yy_size_t yyget_leng (void );
754	\|
755	\| char *yyget_text (void );
756	\|
757	\| int yyget_lineno (void );
758	\|
759	\| void yyset_lineno (int line_number );
760	\|
761	\| /* Macros after this point can all be overridden by user definitions in
762	\| * section 1.
763	\| */
764	\|
765	\| #ifndef YY_SKIP_YYWRAP
766	\| #ifdef __cplusplus
767	\| extern "C" int yywrap (void );
768	\| #else
769	\| extern int yywrap (void );
770	\| #endif
771	\| #endif
772	\|
773	\| static void yyunput (int c,char *buf_ptr );
774	\|
775	\| #ifndef yytext_ptr
776	\| static void yy_flex_strncpy (char ,yyconst char ,int );
777	\| #endif
778	\|
779	\| #ifdef YY_NEED_STRLEN
780	\| static int yy_flex_strlen (yyconst char * );
781	\| #endif
782	\|
783	\| #ifndef YY_NO_INPUT
784	\|
785	\| #ifdef __cplusplus
786	\| static int yyinput (void );
787	\| #else
788	\| static int input (void );
789	\| #endif
790	\|
791	\| #endif
792	\|
793	\| /* Amount of stuff to slurp up with each read. */
794	\| #ifndef YY_READ_BUF_SIZE
795	\| #define YY_READ_BUF_SIZE 8192
796	\| #endif
797	\|
798	\| /* Copy whatever the last rule matched to the standard output. */
799	\| #ifndef ECHO
800	\| /* This used to be an fputs(), but since the string might contain NUL's,
801	\| * we now use fwrite().
802	\| */
803	\| #define ECHO fwrite( yytext, yyleng, 1, yyout )
804	\| #endif
805	\|
806	\| /* Gets input and stuffs it into "buf". number of characters read, or YY_NULL,
807	\| * is returned in "result".
808	\| */
809	\| #ifndef YY_INPUT
810	\| #define YY_INPUT(buf,result,max_size) \
811	\| if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \
812	\| { \
813	\| int c = '*'; \
814	\| yy_size_t n; \
815	\| for ( n = 0; n < max_size && \
816	\| (c = getc( yyin )) != EOF && c != '\n'; ++n ) \
817	\| buf[n] = (char) c; \
818	\| if ( c == '\n' ) \
819	\| buf[n++] = (char) c; \
820	\| if ( c == EOF && ferror( yyin ) ) \
821	\| YY_FATAL_ERROR( "input in flex scanner failed" ); \
822	\| result = n; \
823	\| } \
824	\| else \
825	\| { \
826	\| errno=0; \
827	\| while ( (result = fread(buf, 1, max_size, yyin))==0 && ferror(yyin)) \
828	\| { \
829	\| if( errno != EINTR) \
830	\| { \
831	\| YY_FATAL_ERROR( "input in flex scanner failed" ); \
832	\| break; \
833	\| } \
834	\| errno=0; \
835	\| clearerr(yyin); \
836	\| } \
837	\| }\
838	\| \
839	\|
840	\| #endif
841	\|
842	\| /* No semi-colon after return; correct usage is to write "yyterminate();" -
843	\| * we don't want an extra ';' after the "return" because that will cause
844	\| * some compilers to complain about unreachable statements.
845	\| */
846	\| #ifndef yyterminate
847	\| #define yyterminate() return YY_NULL
848	\| #endif
849	\|
850	\| /* Number of entries by which start-condition stack grows. */
851	\| #ifndef YY_START_STACK_INCR
852	\| #define YY_START_STACK_INCR 25
853	\| #endif
854	\|
855	\| /* Report a fatal error. */
856	\| #ifndef YY_FATAL_ERROR
857	\| #define YY_FATAL_ERROR(msg) yy_fatal_error( msg )
858	\| #endif
859	\|
860	\| /* end tables serialization structures and prototypes */
861	\|
862	\| /* Default declaration of generated scanner - a define so the user can
863	\| * easily add parameters.
864	\| */
865	\| #ifndef YY_DECL
866	\| #define YY_DECL_IS_OURS 1
867	\|
868	\| extern int yylex (void);
869	\|
870	\| #define YY_DECL int yylex (void)
871	\| #endif /* !YY_DECL */
872	\|
873	\| /* Code executed at the beginning of each rule, after yytext and yyleng
874	\| * have been set up.
875	\| */
876	\| #ifndef YY_USER_ACTION
877	\| #define YY_USER_ACTION
878	\| #endif
879	\|
880	\| /* Code executed at the end of each rule. */
881	\| #ifndef YY_BREAK
882	\| #define YY_BREAK break;
883	\| #endif
884	\|
885	\| #define YY_RULE_SETUP \
886	\| YY_USER_ACTION
887	\|
888	\| /** The main scanner function which does all the work.
889	\| */
890	\| YY_DECL
891	\| {
892	\| register yy_state_type yy_current_state;
893	\| register char yy_cp, yy_bp;
894	\| register int yy_act;
895	\|
896	\| #line 1 "conftest.l"
897	\|
898	\| #line 634 "lex.yy.c"
899	\|
900	\| if ( !(yy_init) )
901	\| {
902	\| (yy_init) = 1;
903	\|
904	\| #ifdef YY_USER_INIT
905	\| YY_USER_INIT;
906	\| #endif
907	\|
908	\| if ( ! (yy_start) )
909	\| (yy_start) = 1; /* first start state */
910	\|
911	\| if ( ! yyin )
912	\| yyin = stdin;
913	\|
914	\| if ( ! yyout )
915	\| yyout = stdout;
916	\|
917	\| if ( ! YY_CURRENT_BUFFER ) {
918	\| yyensure_buffer_stack ();
919	\| YY_CURRENT_BUFFER_LVALUE =
920	\| yy_create_buffer(yyin,YY_BUF_SIZE );
921	\| }
922	\|
923	\| yy_load_buffer_state( );
924	\| }
925	\|
926	\| while ( 1 ) /* loops until end-of-file is reached */
927	\| {
928	\| yy_cp = (yy_c_buf_p);
929	\|
930	\| /* Support of yytext. */
931	\| *yy_cp = (yy_hold_char);
932	\|
933	\| /* yy_bp points to the position in yy_ch_buf of the start of
934	\| * the current run.
935	\| */
936	\| yy_bp = yy_cp;
937	\|
938	\| yy_current_state = (yy_start);
939	\| yy_match:
940	\| do
941	\| {
942	\| register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)];
943	\| if ( yy_accept[yy_current_state] )
944	\| {
945	\| (yy_last_accepting_state) = yy_current_state;
946	\| (yy_last_accepting_cpos) = yy_cp;
947	\| }
948	\| while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
949	\| {
950	\| yy_current_state = (int) yy_def[yy_current_state];
951	\| if ( yy_current_state >= 6 )
952	\| yy_c = yy_meta[(unsigned int) yy_c];
953	\| }
954	\| yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
955	\| ++yy_cp;
956	\| }
957	\| while ( yy_base[yy_current_state] != 3 );
958	\|
959	\| yy_find_action:
960	\| yy_act = yy_accept[yy_current_state];
961	\| if ( yy_act == 0 )
962	\| { /* have to back up */
963	\| yy_cp = (yy_last_accepting_cpos);
964	\| yy_current_state = (yy_last_accepting_state);
965	\| yy_act = yy_accept[yy_current_state];
966	\| }
967	\|
968	\| YY_DO_BEFORE_ACTION;
969	\|
970	\| do_action: /* This label is used only to access EOF actions. */
971	\|
972	\| switch ( yy_act )
973	\| { /* beginning of action switch */
974	\| case 0: /* must back up */
975	\| /* undo the effects of YY_DO_BEFORE_ACTION */
976	\| *yy_cp = (yy_hold_char);
977	\| yy_cp = (yy_last_accepting_cpos);
978	\| yy_current_state = (yy_last_accepting_state);
979	\| goto yy_find_action;
980	\|
981	\| case 1:
982	\| YY_RULE_SETUP
983	\| #line 2 "conftest.l"
984	\| ECHO;
985	\| YY_BREAK
986	\| #line 722 "lex.yy.c"
987	\| case YY_STATE_EOF(INITIAL):
988	\| yyterminate();
989	\|
990	\| case YY_END_OF_BUFFER:
991	\| {
992	\| /* Amount of text matched not including the EOB char. */
993	\| int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1;
994	\|
995	\| /* Undo the effects of YY_DO_BEFORE_ACTION. */
996	\| *yy_cp = (yy_hold_char);
997	\| YY_RESTORE_YY_MORE_OFFSET
998	\|
999	\| if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW )
1000	\| {
1001	\| /* We're scanning a new file or input source. It's
1002	\| * possible that this happened because the user
1003	\| * just pointed yyin at a new source and called
1004	\| * yylex(). If so, then we have to assure
1005	\| * consistency between YY_CURRENT_BUFFER and our
1006	\| * globals. Here is the right place to do so, because
1007	\| * this is the first action (other than possibly a
1008	\| * back-up) that will match for the new input source.
1009	\| */
1010	\| (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
1011	\| YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin;
1012	\| YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL;
1013	\| }
1014	\|
1015	\| /* Note that here we test for yy_c_buf_p "<=" to the position
1016	\| * of the first EOB in the buffer, since yy_c_buf_p will
1017	\| * already have been incremented past the NUL character
1018	\| * (since all states make transitions on EOB to the
1019	\| * end-of-buffer state). Contrast this with the test
1020	\| * in input().
1021	\| */
1022	\| if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
1023	\| { /* This was really a NUL. */
1024	\| yy_state_type yy_next_state;
1025	\|
1026	\| (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text;
1027	\|
1028	\| yy_current_state = yy_get_previous_state( );
1029	\|
1030	\| /* Okay, we're now positioned to make the NUL
1031	\| * transition. We couldn't have
1032	\| * yy_get_previous_state() go ahead and do it
1033	\| * for us because it doesn't know how to deal
1034	\| * with the possibility of jamming (and we don't
1035	\| * want to build jamming into it because then it
1036	\| * will run more slowly).
1037	\| */
1038	\|
1039	\| yy_next_state = yy_try_NUL_trans( yy_current_state );
1040	\|
1041	\| yy_bp = (yytext_ptr) + YY_MORE_ADJ;
1042	\|
1043	\| if ( yy_next_state )
1044	\| {
1045	\| /* Consume the NUL. */
1046	\| yy_cp = ++(yy_c_buf_p);
1047	\| yy_current_state = yy_next_state;
1048	\| goto yy_match;
1049	\| }
1050	\|
1051	\| else
1052	\| {
1053	\| yy_cp = (yy_c_buf_p);
1054	\| goto yy_find_action;
1055	\| }
1056	\| }
1057	\|
1058	\| else switch ( yy_get_next_buffer( ) )
1059	\| {
1060	\| case EOB_ACT_END_OF_FILE:
1061	\| {
1062	\| (yy_did_buffer_switch_on_eof) = 0;
1063	\|
1064	\| if ( yywrap( ) )
1065	\| {
1066	\| /* Note: because we've taken care in
1067	\| * yy_get_next_buffer() to have set up
1068	\| * yytext, we can now set up
1069	\| * yy_c_buf_p so that if some total
1070	\| * hoser (like flex itself) wants to
1071	\| * call the scanner after we return the
1072	\| * YY_NULL, it'll still work - another
1073	\| * YY_NULL will get returned.
1074	\| */
1075	\| (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ;
1076	\|
1077	\| yy_act = YY_STATE_EOF(YY_START);
1078	\| goto do_action;
1079	\| }
1080	\|
1081	\| else
1082	\| {
1083	\| if ( ! (yy_did_buffer_switch_on_eof) )
1084	\| YY_NEW_FILE;
1085	\| }
1086	\| break;
1087	\| }
1088	\|
1089	\| case EOB_ACT_CONTINUE_SCAN:
1090	\| (yy_c_buf_p) =
1091	\| (yytext_ptr) + yy_amount_of_matched_text;
1092	\|
1093	\| yy_current_state = yy_get_previous_state( );
1094	\|
1095	\| yy_cp = (yy_c_buf_p);
1096	\| yy_bp = (yytext_ptr) + YY_MORE_ADJ;
1097	\| goto yy_match;
1098	\|
1099	\| case EOB_ACT_LAST_MATCH:
1100	\| (yy_c_buf_p) =
1101	\| &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)];
1102	\|
1103	\| yy_current_state = yy_get_previous_state( );
1104	\|
1105	\| yy_cp = (yy_c_buf_p);
1106	\| yy_bp = (yytext_ptr) + YY_MORE_ADJ;
1107	\| goto yy_find_action;
1108	\| }
1109	\| break;
1110	\| }
1111	\|
1112	\| default:
1113	\| YY_FATAL_ERROR(
1114	\| "fatal flex scanner internal error--no action found" );
1115	\| } /* end of action switch */
1116	\| } /* end of scanning one token */
1117	\| } /* end of yylex */
1118	\|
1119	\| /* yy_get_next_buffer - try to read in a new buffer
1120	\| *
1121	\| * Returns a code representing an action:
1122	\| * EOB_ACT_LAST_MATCH -
1123	\| * EOB_ACT_CONTINUE_SCAN - continue scanning from current position
1124	\| * EOB_ACT_END_OF_FILE - end of file
1125	\| */
1126	\| static int yy_get_next_buffer (void)
1127	\| {
1128	\| register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf;
1129	\| register char *source = (yytext_ptr);
1130	\| register int number_to_move, i;
1131	\| int ret_val;
1132	\|
1133	\| if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] )
1134	\| YY_FATAL_ERROR(
1135	\| "fatal flex scanner internal error--end of buffer missed" );
1136	\|
1137	\| if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 )
1138	\| { /* Don't try to fill the buffer, so this is an EOF. */
1139	\| if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 )
1140	\| {
1141	\| /* We matched a single character, the EOB, so
1142	\| * treat this as a final EOF.
1143	\| */
1144	\| return EOB_ACT_END_OF_FILE;
1145	\| }
1146	\|
1147	\| else
1148	\| {
1149	\| /* We matched some text prior to the EOB, first
1150	\| * process it.
1151	\| */
1152	\| return EOB_ACT_LAST_MATCH;
1153	\| }
1154	\| }
1155	\|
1156	\| /* Try to read more data. */
1157	\|
1158	\| /* First move last chars to start of buffer. */
1159	\| number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1;
1160	\|
1161	\| for ( i = 0; i < number_to_move; ++i )
1162	\| (dest++) = (source++);
1163	\|
1164	\| if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING )
1165	\| /* don't do the read, it's not guaranteed to return an EOF,
1166	\| * just force an EOF
1167	\| */
1168	\| YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0;
1169	\|
1170	\| else
1171	\| {
1172	\| yy_size_t num_to_read =
1173	\| YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1;
1174	\|
1175	\| while ( num_to_read <= 0 )
1176	\| { /* Not enough room in the buffer - grow it. */
1177	\|
1178	\| /* just a shorter name for the current buffer */
1179	\| YY_BUFFER_STATE b = YY_CURRENT_BUFFER;
1180	\|
1181	\| int yy_c_buf_p_offset =
1182	\| (int) ((yy_c_buf_p) - b->yy_ch_buf);
1183	\|
1184	\| if ( b->yy_is_our_buffer )
1185	\| {
1186	\| yy_size_t new_size = b->yy_buf_size * 2;
1187	\|
1188	\| if ( new_size <= 0 )
1189	\| b->yy_buf_size += b->yy_buf_size / 8;
1190	\| else
1191	\| b->yy_buf_size *= 2;
1192	\|
1193	\| b->yy_ch_buf = (char *)
1194	\| /* Include room in for 2 EOB chars. */
1195	\| yyrealloc((void *) b->yy_ch_buf,b->yy_buf_size + 2 );
1196	\| }
1197	\| else
1198	\| /* Can't grow it, we don't own it. */
1199	\| b->yy_ch_buf = 0;
1200	\|
1201	\| if ( ! b->yy_ch_buf )
1202	\| YY_FATAL_ERROR(
1203	\| "fatal error - scanner input buffer overflow" );
1204	\|
1205	\| (yy_c_buf_p) = &b->yy_ch_buf[yy_c_buf_p_offset];
1206	\|
1207	\| num_to_read = YY_CURRENT_BUFFER_LVALUE->yy_buf_size -
1208	\| number_to_move - 1;
1209	\|
1210	\| }
1211	\|
1212	\| if ( num_to_read > YY_READ_BUF_SIZE )
1213	\| num_to_read = YY_READ_BUF_SIZE;
1214	\|
1215	\| /* Read in more data. */
1216	\| YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]),
1217	\| (yy_n_chars), num_to_read );
1218	\|
1219	\| YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
1220	\| }
1221	\|
1222	\| if ( (yy_n_chars) == 0 )
1223	\| {
1224	\| if ( number_to_move == YY_MORE_ADJ )
1225	\| {
1226	\| ret_val = EOB_ACT_END_OF_FILE;
1227	\| yyrestart(yyin );
1228	\| }
1229	\|
1230	\| else
1231	\| {
1232	\| ret_val = EOB_ACT_LAST_MATCH;
1233	\| YY_CURRENT_BUFFER_LVALUE->yy_buffer_status =
1234	\| YY_BUFFER_EOF_PENDING;
1235	\| }
1236	\| }
1237	\|
1238	\| else
1239	\| ret_val = EOB_ACT_CONTINUE_SCAN;
1240	\|
1241	\| if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) {
1242	\| /* Extend the array by 50%, plus the number we really need. */
1243	\| yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1);
1244	\| YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char ) yyrealloc((void ) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size );
1245	\| if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
1246	\| YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" );
1247	\| }
1248	\|
1249	\| (yy_n_chars) += number_to_move;
1250	\| YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR;
1251	\| YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR;
1252	\|
1253	\| (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0];
1254	\|
1255	\| return ret_val;
1256	\| }
1257	\|
1258	\| /* yy_get_previous_state - get the state just before the EOB char was reached */
1259	\|
1260	\| static yy_state_type yy_get_previous_state (void)
1261	\| {
1262	\| register yy_state_type yy_current_state;
1263	\| register char *yy_cp;
1264	\|
1265	\| yy_current_state = (yy_start);
1266	\|
1267	\| for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp )
1268	\| {
1269	\| register YY_CHAR yy_c = (yy_cp ? yy_ec[YY_SC_TO_UI(yy_cp)] : 1);
1270	\| if ( yy_accept[yy_current_state] )
1271	\| {
1272	\| (yy_last_accepting_state) = yy_current_state;
1273	\| (yy_last_accepting_cpos) = yy_cp;
1274	\| }
1275	\| while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
1276	\| {
1277	\| yy_current_state = (int) yy_def[yy_current_state];
1278	\| if ( yy_current_state >= 6 )
1279	\| yy_c = yy_meta[(unsigned int) yy_c];
1280	\| }
1281	\| yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
1282	\| }
1283	\|
1284	\| return yy_current_state;
1285	\| }
1286	\|
1287	\| /* yy_try_NUL_trans - try to make a transition on the NUL character
1288	\| *
1289	\| * synopsis
1290	\| * next_state = yy_try_NUL_trans( current_state );
1291	\| */
1292	\| static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state )
1293	\| {
1294	\| register int yy_is_jam;
1295	\| register char *yy_cp = (yy_c_buf_p);
1296	\|
1297	\| register YY_CHAR yy_c = 1;
1298	\| if ( yy_accept[yy_current_state] )
1299	\| {
1300	\| (yy_last_accepting_state) = yy_current_state;
1301	\| (yy_last_accepting_cpos) = yy_cp;
1302	\| }
1303	\| while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
1304	\| {
1305	\| yy_current_state = (int) yy_def[yy_current_state];
1306	\| if ( yy_current_state >= 6 )
1307	\| yy_c = yy_meta[(unsigned int) yy_c];
1308	\| }
1309	\| yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
1310	\| yy_is_jam = (yy_current_state == 5);
1311	\|
1312	\| return yy_is_jam ? 0 : yy_current_state;
1313	\| }
1314	\|
1315	\| static void yyunput (int c, register char * yy_bp )
1316	\| {
1317	\| register char *yy_cp;
1318	\|
1319	\| yy_cp = (yy_c_buf_p);
1320	\|
1321	\| /* undo effects of setting up yytext */
1322	\| *yy_cp = (yy_hold_char);
1323	\|
1324	\| if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 )
1325	\| { /* need to shift things up to make room */
1326	\| /* +2 for EOB chars. */
1327	\| register yy_size_t number_to_move = (yy_n_chars) + 2;
1328	\| register char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[
1329	\| YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2];
1330	\| register char *source =
1331	\| &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move];
1332	\|
1333	\| while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
1334	\| --dest = --source;
1335	\|
1336	\| yy_cp += (int) (dest - source);
1337	\| yy_bp += (int) (dest - source);
1338	\| YY_CURRENT_BUFFER_LVALUE->yy_n_chars =
1339	\| (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_buf_size;
1340	\|
1341	\| if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 )
1342	\| YY_FATAL_ERROR( "flex scanner push-back overflow" );
1343	\| }
1344	\|
1345	\| *--yy_cp = (char) c;
1346	\|
1347	\| (yytext_ptr) = yy_bp;
1348	\| (yy_hold_char) = *yy_cp;
1349	\| (yy_c_buf_p) = yy_cp;
1350	\| }
1351	\|
1352	\| #ifndef YY_NO_INPUT
1353	\| #ifdef __cplusplus
1354	\| static int yyinput (void)
1355	\| #else
1356	\| static int input (void)
1357	\| #endif
1358	\|
1359	\| {
1360	\| int c;
1361	\|
1362	\| *(yy_c_buf_p) = (yy_hold_char);
1363	\|
1364	\| if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR )
1365	\| {
1366	\| /* yy_c_buf_p now points to the character we want to return.
1367	\| * If this occurs before the EOB characters, then it's a
1368	\| * valid NUL; if not, then we've hit the end of the buffer.
1369	\| */
1370	\| if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
1371	\| /* This was really a NUL. */
1372	\| *(yy_c_buf_p) = '\0';
1373	\|
1374	\| else
1375	\| { /* need more input */
1376	\| yy_size_t offset = (yy_c_buf_p) - (yytext_ptr);
1377	\| ++(yy_c_buf_p);
1378	\|
1379	\| switch ( yy_get_next_buffer( ) )
1380	\| {
1381	\| case EOB_ACT_LAST_MATCH:
1382	\| /* This happens because yy_g_n_b()
1383	\| * sees that we've accumulated a
1384	\| * token and flags that we need to
1385	\| * try matching the token before
1386	\| * proceeding. But for input(),
1387	\| * there's no matching to consider.
1388	\| * So convert the EOB_ACT_LAST_MATCH
1389	\| * to EOB_ACT_END_OF_FILE.
1390	\| */
1391	\|
1392	\| /* Reset buffer status. */
1393	\| yyrestart(yyin );
1394	\|
1395	\| /FALLTHROUGH/
1396	\|
1397	\| case EOB_ACT_END_OF_FILE:
1398	\| {
1399	\| if ( yywrap( ) )
1400	\| return 0;
1401	\|
1402	\| if ( ! (yy_did_buffer_switch_on_eof) )
1403	\| YY_NEW_FILE;
1404	\| #ifdef __cplusplus
1405	\| return yyinput();
1406	\| #else
1407	\| return input();
1408	\| #endif
1409	\| }
1410	\|
1411	\| case EOB_ACT_CONTINUE_SCAN:
1412	\| (yy_c_buf_p) = (yytext_ptr) + offset;
1413	\| break;
1414	\| }
1415	\| }
1416	\| }
1417	\|
1418	\| c = (unsigned char ) (yy_c_buf_p); /* cast for 8-bit char's */
1419	\| (yy_c_buf_p) = '\0'; / preserve yytext */
1420	\| (yy_hold_char) = *++(yy_c_buf_p);
1421	\|
1422	\| return c;
1423	\| }
1424	\| #endif /* ifndef YY_NO_INPUT */
1425	\|
1426	\| /** Immediately switch to a different input stream.
1427	\| * @param input_file A readable stream.
1428	\| *
1429	\| * @note This function does not reset the start condition to @c INITIAL .
1430	\| */
1431	\| void yyrestart (FILE * input_file )
1432	\| {
1433	\|
1434	\| if ( ! YY_CURRENT_BUFFER ){
1435	\| yyensure_buffer_stack ();
1436	\| YY_CURRENT_BUFFER_LVALUE =
1437	\| yy_create_buffer(yyin,YY_BUF_SIZE );
1438	\| }
1439	\|
1440	\| yy_init_buffer(YY_CURRENT_BUFFER,input_file );
1441	\| yy_load_buffer_state( );
1442	\| }
1443	\|
1444	\| /** Switch to a different input buffer.
1445	\| * @param new_buffer The new input buffer.
1446	\| *
1447	\| */
1448	\| void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer )
1449	\| {
1450	\|
1451	\| /* TODO. We should be able to replace this entire function body
1452	\| * with
1453	\| * yypop_buffer_state();
1454	\| * yypush_buffer_state(new_buffer);
1455	\| */
1456	\| yyensure_buffer_stack ();
1457	\| if ( YY_CURRENT_BUFFER == new_buffer )
1458	\| return;
1459	\|
1460	\| if ( YY_CURRENT_BUFFER )
1461	\| {
1462	\| /* Flush out information for old buffer. */
1463	\| *(yy_c_buf_p) = (yy_hold_char);
1464	\| YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
1465	\| YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
1466	\| }
1467	\|
1468	\| YY_CURRENT_BUFFER_LVALUE = new_buffer;
1469	\| yy_load_buffer_state( );
1470	\|
1471	\| /* We don't actually know whether we did this switch during
1472	\| * EOF (yywrap()) processing, but the only time this flag
1473	\| * is looked at is after yywrap() is called, so it's safe
1474	\| * to go ahead and always set it.
1475	\| */
1476	\| (yy_did_buffer_switch_on_eof) = 1;
1477	\| }
1478	\|
1479	\| static void yy_load_buffer_state (void)
1480	\| {
1481	\| (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
1482	\| (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos;
1483	\| yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file;
1484	\| (yy_hold_char) = *(yy_c_buf_p);
1485	\| }
1486	\|
1487	\| /** Allocate and initialize an input buffer state.
1488	\| * @param file A readable stream.
1489	\| * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE.
1490	\| *
1491	\| * @return the allocated buffer state.
1492	\| */
1493	\| YY_BUFFER_STATE yy_create_buffer (FILE * file, int size )
1494	\| {
1495	\| YY_BUFFER_STATE b;
1496	\|
1497	\| b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) );
1498	\| if ( ! b )
1499	\| YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
1500	\|
1501	\| b->yy_buf_size = size;
1502	\|
1503	\| /* yy_ch_buf has to be 2 characters longer than the size given because
1504	\| * we need to put in 2 end-of-buffer characters.
1505	\| */
1506	\| b->yy_ch_buf = (char *) yyalloc(b->yy_buf_size + 2 );
1507	\| if ( ! b->yy_ch_buf )
1508	\| YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
1509	\|
1510	\| b->yy_is_our_buffer = 1;
1511	\|
1512	\| yy_init_buffer(b,file );
1513	\|
1514	\| return b;
1515	\| }
1516	\|
1517	\| /** Destroy the buffer.
1518	\| * @param b a buffer created with yy_create_buffer()
1519	\| *
1520	\| */
1521	\| void yy_delete_buffer (YY_BUFFER_STATE b )
1522	\| {
1523	\|
1524	\| if ( ! b )
1525	\| return;
1526	\|
1527	\| if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */
1528	\| YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0;
1529	\|
1530	\| if ( b->yy_is_our_buffer )
1531	\| yyfree((void *) b->yy_ch_buf );
1532	\|
1533	\| yyfree((void *) b );
1534	\| }
1535	\|
1536	\| #ifndef __cplusplus
1537	\| extern int isatty (int );
1538	\| #endif /* __cplusplus */
1539	\|
1540	\| /* Initializes or reinitializes a buffer.
1541	\| * This function is sometimes called more than once on the same buffer,
1542	\| * such as during a yyrestart() or at EOF.
1543	\| */
1544	\| static void yy_init_buffer (YY_BUFFER_STATE b, FILE * file )
1545	\|
1546	\| {
1547	\| int oerrno = errno;
1548	\|
1549	\| yy_flush_buffer(b );
1550	\|
1551	\| b->yy_input_file = file;
1552	\| b->yy_fill_buffer = 1;
1553	\|
1554	\| /* If b is the current buffer, then yy_init_buffer was _probably_
1555	\| * called from yyrestart() or through yy_get_next_buffer.
1556	\| * In that case, we don't want to reset the lineno or column.
1557	\| */
1558	\| if (b != YY_CURRENT_BUFFER){
1559	\| b->yy_bs_lineno = 1;
1560	\| b->yy_bs_column = 0;
1561	\| }
1562	\|
1563	\| b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0;
1564	\|
1565	\| errno = oerrno;
1566	\| }
1567	\|
1568	\| /** Discard all buffered characters. On the next scan, YY_INPUT will be called.
1569	\| * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER.
1570	\| *
1571	\| */
1572	\| void yy_flush_buffer (YY_BUFFER_STATE b )
1573	\| {
1574	\| if ( ! b )
1575	\| return;
1576	\|
1577	\| b->yy_n_chars = 0;
1578	\|
1579	\| /* We always need two end-of-buffer characters. The first causes
1580	\| * a transition to the end-of-buffer state. The second causes
1581	\| * a jam in that state.
1582	\| */
1583	\| b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR;
1584	\| b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR;
1585	\|
1586	\| b->yy_buf_pos = &b->yy_ch_buf[0];
1587	\|
1588	\| b->yy_at_bol = 1;
1589	\| b->yy_buffer_status = YY_BUFFER_NEW;
1590	\|
1591	\| if ( b == YY_CURRENT_BUFFER )
1592	\| yy_load_buffer_state( );
1593	\| }
1594	\|
1595	\| /** Pushes the new state onto the stack. The new state becomes
1596	\| * the current state. This function will allocate the stack
1597	\| * if necessary.
1598	\| * @param new_buffer The new state.
1599	\| *
1600	\| */
1601	\| void yypush_buffer_state (YY_BUFFER_STATE new_buffer )
1602	\| {
1603	\| if (new_buffer == NULL)
1604	\| return;
1605	\|
1606	\| yyensure_buffer_stack();
1607	\|
1608	\| /* This block is copied from yy_switch_to_buffer. */
1609	\| if ( YY_CURRENT_BUFFER )
1610	\| {
1611	\| /* Flush out information for old buffer. */
1612	\| *(yy_c_buf_p) = (yy_hold_char);
1613	\| YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
1614	\| YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
1615	\| }
1616	\|
1617	\| /* Only push if top exists. Otherwise, replace top. */
1618	\| if (YY_CURRENT_BUFFER)
1619	\| (yy_buffer_stack_top)++;
1620	\| YY_CURRENT_BUFFER_LVALUE = new_buffer;
1621	\|
1622	\| /* copied from yy_switch_to_buffer. */
1623	\| yy_load_buffer_state( );
1624	\| (yy_did_buffer_switch_on_eof) = 1;
1625	\| }
1626	\|
1627	\| /** Removes and deletes the top of the stack, if present.
1628	\| * The next element becomes the new top.
1629	\| *
1630	\| */
1631	\| void yypop_buffer_state (void)
1632	\| {
1633	\| if (!YY_CURRENT_BUFFER)
1634	\| return;
1635	\|
1636	\| yy_delete_buffer(YY_CURRENT_BUFFER );
1637	\| YY_CURRENT_BUFFER_LVALUE = NULL;
1638	\| if ((yy_buffer_stack_top) > 0)
1639	\| --(yy_buffer_stack_top);
1640	\|
1641	\| if (YY_CURRENT_BUFFER) {
1642	\| yy_load_buffer_state( );
1643	\| (yy_did_buffer_switch_on_eof) = 1;
1644	\| }
1645	\| }
1646	\|
1647	\| /* Allocates the stack if it does not exist.
1648	\| * Guarantees space for at least one push.
1649	\| */
1650	\| static void yyensure_buffer_stack (void)
1651	\| {
1652	\| yy_size_t num_to_alloc;
1653	\|
1654	\| if (!(yy_buffer_stack)) {
1655	\|
1656	\| /* First allocation is just for 2 elements, since we don't know if this
1657	\| * scanner will even need a stack. We use 2 instead of 1 to avoid an
1658	\| * immediate realloc on the next call.
1659	\| */
1660	\| num_to_alloc = 1;
1661	\| (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc
1662	\| (num_to_alloc * sizeof(struct yy_buffer_state*)
1663	\| );
1664	\| if ( ! (yy_buffer_stack) )
1665	\| YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" );
1666	\|
1667	\| memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*));
1668	\|
1669	\| (yy_buffer_stack_max) = num_to_alloc;
1670	\| (yy_buffer_stack_top) = 0;
1671	\| return;
1672	\| }
1673	\|
1674	\| if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){
1675	\|
1676	\| /* Increase the buffer to prepare for a possible push. */
1677	\| int grow_size = 8 /* arbitrary grow size */;
1678	\|
1679	\| num_to_alloc = (yy_buffer_stack_max) + grow_size;
1680	\| (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc
1681	\| ((yy_buffer_stack),
1682	\| num_to_alloc * sizeof(struct yy_buffer_state*)
1683	\| );
1684	\| if ( ! (yy_buffer_stack) )
1685	\| YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" );
1686	\|
1687	\| /* zero only the new slots.*/
1688	\| memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*));
1689	\| (yy_buffer_stack_max) = num_to_alloc;
1690	\| }
1691	\| }
1692	\|
1693	\| /** Setup the input buffer state to scan directly from a user-specified character buffer.
1694	\| * @param base the character buffer
1695	\| * @param size the size in bytes of the character buffer
1696	\| *
1697	\| * @return the newly allocated buffer state object.
1698	\| */
1699	\| YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size )
1700	\| {
1701	\| YY_BUFFER_STATE b;
1702	\|
1703	\| if ( size < 2 \|\|
1704	\| base[size-2] != YY_END_OF_BUFFER_CHAR \|\|
1705	\| base[size-1] != YY_END_OF_BUFFER_CHAR )
1706	\| /* They forgot to leave room for the EOB's. */
1707	\| return 0;
1708	\|
1709	\| b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) );
1710	\| if ( ! b )
1711	\| YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" );
1712	\|
1713	\| b->yy_buf_size = size - 2; /* "- 2" to take care of EOB's */
1714	\| b->yy_buf_pos = b->yy_ch_buf = base;
1715	\| b->yy_is_our_buffer = 0;
1716	\| b->yy_input_file = 0;
1717	\| b->yy_n_chars = b->yy_buf_size;
1718	\| b->yy_is_interactive = 0;
1719	\| b->yy_at_bol = 1;
1720	\| b->yy_fill_buffer = 0;
1721	\| b->yy_buffer_status = YY_BUFFER_NEW;
1722	\|
1723	\| yy_switch_to_buffer(b );
1724	\|
1725	\| return b;
1726	\| }
1727	\|
1728	\| /** Setup the input buffer state to scan a string. The next call to yylex() will
1729	\| * scan from a @e copy of @a str.
1730	\| * @param yystr a NUL-terminated string to scan
1731	\| *
1732	\| * @return the newly allocated buffer state object.
1733	\| * @note If you want to scan bytes that may contain NUL values, then use
1734	\| * yy_scan_bytes() instead.
1735	\| */
1736	\| YY_BUFFER_STATE yy_scan_string (yyconst char * yystr )
1737	\| {
1738	\|
1739	\| return yy_scan_bytes(yystr,strlen(yystr) );
1740	\| }
1741	\|
1742	\| /** Setup the input buffer state to scan the given bytes. The next call to yylex() will
1743	\| * scan from a @e copy of @a bytes.
1744	\| * @param bytes the byte buffer to scan
1745	\| * @param len the number of bytes in the buffer pointed to by @a bytes.
1746	\| *
1747	\| * @return the newly allocated buffer state object.
1748	\| */
1749	\| YY_BUFFER_STATE yy_scan_bytes (yyconst char * yybytes, yy_size_t _yybytes_len )
1750	\| {
1751	\| YY_BUFFER_STATE b;
1752	\| char *buf;
1753	\| yy_size_t n, i;
1754	\|
1755	\| /* Get memory for full buffer, including space for trailing EOB's. */
1756	\| n = _yybytes_len + 2;
1757	\| buf = (char *) yyalloc(n );
1758	\| if ( ! buf )
1759	\| YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" );
1760	\|
1761	\| for ( i = 0; i < _yybytes_len; ++i )
1762	\| buf[i] = yybytes[i];
1763	\|
1764	\| buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR;
1765	\|
1766	\| b = yy_scan_buffer(buf,n );
1767	\| if ( ! b )
1768	\| YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" );
1769	\|
1770	\| /* It's okay to grow etc. this buffer, and we should throw it
1771	\| * away when we're done.
1772	\| */
1773	\| b->yy_is_our_buffer = 1;
1774	\|
1775	\| return b;
1776	\| }
1777	\|
1778	\| #ifndef YY_EXIT_FAILURE
1779	\| #define YY_EXIT_FAILURE 2
1780	\| #endif
1781	\|
1782	\| static void yy_fatal_error (yyconst char* msg )
1783	\| {
1784	\| (void) fprintf( stderr, "%s\n", msg );
1785	\| exit( YY_EXIT_FAILURE );
1786	\| }
1787	\|
1788	\| /* Redefine yyless() so it works in section 3 code. */
1789	\|
1790	\| #undef yyless
1791	\| #define yyless(n) \
1792	\| do \
1793	\| { \
1794	\| /* Undo effects of setting up yytext. */ \
1795	\| int yyless_macro_arg = (n); \
1796	\| YY_LESS_LINENO(yyless_macro_arg);\
1797	\| yytext[yyleng] = (yy_hold_char); \
1798	\| (yy_c_buf_p) = yytext + yyless_macro_arg; \
1799	\| (yy_hold_char) = *(yy_c_buf_p); \
1800	\| *(yy_c_buf_p) = '\0'; \
1801	\| yyleng = yyless_macro_arg; \
1802	\| } \
1803	\| while ( 0 )
1804	\|
1805	\| /* Accessor methods (get/set functions) to struct members. */
1806	\|
1807	\| /** Get the current line number.
1808	\| *
1809	\| */
1810	\| int yyget_lineno (void)
1811	\| {
1812	\|
1813	\| return yylineno;
1814	\| }
1815	\|
1816	\| /** Get the input stream.
1817	\| *
1818	\| */
1819	\| FILE *yyget_in (void)
1820	\| {
1821	\| return yyin;
1822	\| }
1823	\|
1824	\| /** Get the output stream.
1825	\| *
1826	\| */
1827	\| FILE *yyget_out (void)
1828	\| {
1829	\| return yyout;
1830	\| }
1831	\|
1832	\| /** Get the length of the current token.
1833	\| *
1834	\| */
1835	\| yy_size_t yyget_leng (void)
1836	\| {
1837	\| return yyleng;
1838	\| }
1839	\|
1840	\| /** Get the current token.
1841	\| *
1842	\| */
1843	\|
1844	\| char *yyget_text (void)
1845	\| {
1846	\| return yytext;
1847	\| }
1848	\|
1849	\| /** Set the current line number.
1850	\| * @param line_number
1851	\| *
1852	\| */
1853	\| void yyset_lineno (int line_number )
1854	\| {
1855	\|
1856	\| yylineno = line_number;
1857	\| }
1858	\|
1859	\| /** Set the input stream. This does not discard the current
1860	\| * input buffer.
1861	\| * @param in_str A readable stream.
1862	\| *
1863	\| * @see yy_switch_to_buffer
1864	\| */
1865	\| void yyset_in (FILE * in_str )
1866	\| {
1867	\| yyin = in_str ;
1868	\| }
1869	\|
1870	\| void yyset_out (FILE * out_str )
1871	\| {
1872	\| yyout = out_str ;
1873	\| }
1874	\|
1875	\| int yyget_debug (void)
1876	\| {
1877	\| return yy_flex_debug;
1878	\| }
1879	\|
1880	\| void yyset_debug (int bdebug )
1881	\| {
1882	\| yy_flex_debug = bdebug ;
1883	\| }
1884	\|
1885	\| static int yy_init_globals (void)
1886	\| {
1887	\| /* Initialization is the same as for the non-reentrant scanner.
1888	\| * This function is called from yylex_destroy(), so don't allocate here.
1889	\| */
1890	\|
1891	\| (yy_buffer_stack) = 0;
1892	\| (yy_buffer_stack_top) = 0;
1893	\| (yy_buffer_stack_max) = 0;
1894	\| (yy_c_buf_p) = (char *) 0;
1895	\| (yy_init) = 0;
1896	\| (yy_start) = 0;
1897	\|
1898	\| /* Defined in main.c */
1899	\| #ifdef YY_STDINIT
1900	\| yyin = stdin;
1901	\| yyout = stdout;
1902	\| #else
1903	\| yyin = (FILE *) 0;
1904	\| yyout = (FILE *) 0;
1905	\| #endif
1906	\|
1907	\| /* For future reference: Set errno on error, since we are called by
1908	\| * yylex_init()
1909	\| */
1910	\| return 0;
1911	\| }
1912	\|
1913	\| /* yylex_destroy is for both reentrant and non-reentrant scanners. */
1914	\| int yylex_destroy (void)
1915	\| {
1916	\|
1917	\| /* Pop the buffer stack, destroying each element. */
1918	\| while(YY_CURRENT_BUFFER){
1919	\| yy_delete_buffer(YY_CURRENT_BUFFER );
1920	\| YY_CURRENT_BUFFER_LVALUE = NULL;
1921	\| yypop_buffer_state();
1922	\| }
1923	\|
1924	\| /* Destroy the stack itself. */
1925	\| yyfree((yy_buffer_stack) );
1926	\| (yy_buffer_stack) = NULL;
1927	\|
1928	\| /* Reset the globals. This is important in a non-reentrant scanner so the next time
1929	\| * yylex() is called, initialization will occur. */
1930	\| yy_init_globals( );
1931	\|
1932	\| return 0;
1933	\| }
1934	\|
1935	\| /*
1936	\| * Internal utility routines.
1937	\| */
1938	\|
1939	\| #ifndef yytext_ptr
1940	\| static void yy_flex_strncpy (char* s1, yyconst char * s2, int n )
1941	\| {
1942	\| register int i;
1943	\| for ( i = 0; i < n; ++i )
1944	\| s1[i] = s2[i];
1945	\| }
1946	\| #endif
1947	\|
1948	\| #ifdef YY_NEED_STRLEN
1949	\| static int yy_flex_strlen (yyconst char * s )
1950	\| {
1951	\| register int n;
1952	\| for ( n = 0; s[n]; ++n )
1953	\| ;
1954	\|
1955	\| return n;
1956	\| }
1957	\| #endif
1958	\|
1959	\| void *yyalloc (yy_size_t size )
1960	\| {
1961	\| return (void *) malloc( size );
1962	\| }
1963	\|
1964	\| void yyrealloc (void ptr, yy_size_t size )
1965	\| {
1966	\| /* The cast to (char *) in the following accommodates both
1967	\| * implementations that use char* generic pointers, and those
1968	\| * that use void* generic pointers. It works with the latter
1969	\| * because both ANSI C and C++ allow castless assignment from
1970	\| * any pointer type to void*, and deal with argument conversions
1971	\| * as though doing an assignment.
1972	\| */
1973	\| return (void ) realloc( (char ) ptr, size );
1974	\| }
1975	\|
1976	\| void yyfree (void * ptr )
1977	\| {
1978	\| free( (char ) ptr ); / see yyrealloc() for (char ) cast /
1979	\| }
1980	\|
1981	\| #define YYTABLES_NAME "yytables"
1982	\|
1983	\| #line 2 "conftest.l"
1984	\|
1985	\|
1986	\|
1987	\| extern char *yytext;
1988	configure:3330: result: no
1989	configure:3357: checking for a BSD-compatible install
1990	configure:3412: result: /usr/bin/install -c
1991	configure:3423: checking whether make sets $(MAKE)
1992	configure:3443: result: yes
1993	configure:3452: checking whether ln -s works
1994	configure:3456: result: yes
1995	configure:3465: checking for bison
1996	configure:3481: found /usr/bin/bison
1997	configure:3492: result: bison
1998	configure:3501: checking for grep
1999	configure:3517: found /usr/bin/grep
2000	configure:3528: result: grep
2001	configure:3537: checking for diff
2002	configure:3553: found /usr/bin/diff
2003	configure:3564: result: diff
2004	configure:3573: checking for cat
2005	configure:3589: found /bin/cat
2006	configure:3600: result: cat
2007	configure:3609: checking for rm
2008	configure:3625: found /bin/rm
2009	configure:3636: result: rm
2010	configure:3645: checking for mv
2011	configure:3661: found /bin/mv
2012	configure:3672: result: mv
2013	configure:3681: checking for cp
2014	configure:3697: found /bin/cp
2015	configure:3708: result: cp
2016	configure:3717: checking for sed
2017	configure:3733: found /usr/bin/sed
2018	configure:3744: result: sed
2019	configure:3756: checking whether we need _ALL_SOURCE to expose mode_t
2020	configure:3778: /usr/bin/clang -c -pipe -O2 -arch x86_64 -arch i386 -I/opt/local/include conftest.c >&5
2021	conftest.c:11:1: error: unknown type name 'mode_t'
2022	mode_t x;
2023	^
2024	1 error generated.
2025	configure:3784: $? = 1
2026	configure: failed program was:
2027	\| /* confdefs.h. */
2028	\|
2029	\| #define PACKAGE_NAME "Splint"
2030	\| #define PACKAGE_TARNAME "splint"
2031	\| #define PACKAGE_VERSION "3.1.2"
2032	\| #define PACKAGE_STRING "Splint 3.1.2"
2033	\| #define PACKAGE_BUGREPORT "splint-bug@splint.org"
2034	\| /* end confdefs.h. */
2035	\|
2036	\| #include <stdio.h>
2037	\| mode_t x;
2038	\|
2039	\| int
2040	\| main ()
2041	\| {
2042	\|
2043	\| ;
2044	\| return 0;
2045	\| }
2046	configure:3828: /usr/bin/clang -c -pipe -O2 -arch x86_64 -arch i386 -I/opt/local/include conftest.c >&5
2047	conftest.c:12:1: error: unknown type name 'mode_t'
2048	mode_t x;
2049	^
2050	1 error generated.
2051	configure:3834: $? = 1
2052	configure: failed program was:
2053	\| /* confdefs.h. */
2054	\|
2055	\| #define PACKAGE_NAME "Splint"
2056	\| #define PACKAGE_TARNAME "splint"
2057	\| #define PACKAGE_VERSION "3.1.2"
2058	\| #define PACKAGE_STRING "Splint 3.1.2"
2059	\| #define PACKAGE_BUGREPORT "splint-bug@splint.org"
2060	\| /* end confdefs.h. */
2061	\|
2062	\| #define _ALL_SOURCE
2063	\| #include <stdio.h>
2064	\| mode_t x;
2065	\|
2066	\| int
2067	\| main ()
2068	\| {
2069	\|
2070	\| ;
2071	\| return 0;
2072	\| }
2073	configure:3861: result: no
2074	configure:3873: checking whether to include support for LCL files
2075	configure:3880: result: yes
2076	configure:4169: creating ./config.status
2077
2078	## ---------------------- ##
2079	## Running config.status. ##
2080	## ---------------------- ##
2081
2082	This file was extended by Splint config.status 3.1.2, which was
2083	generated by GNU Autoconf 2.59. Invocation command line was
2084
2085	CONFIG_FILES =
2086	CONFIG_HEADERS =
2087	CONFIG_LINKS =
2088	CONFIG_COMMANDS =
2089	$ ./config.status
2090
2091	on gl00b05046.cats.gwu.edu
2092
2093	config.status:712: creating Makefile
2094	config.status:712: creating imports/Makefile
2095	config.status:712: creating lib/Makefile
2096	config.status:712: creating src/Makefile
2097	config.status:712: creating test/Makefile
2098	config.status:712: creating doc/Makefile
2099	config.status:712: creating bin/Makefile
2100	config.status:816: creating config.h
2101	config.status:1112: executing depfiles commands
2102
2103	## ---------------- ##
2104	## Cache variables. ##
2105	## ---------------- ##
2106
2107	ac_cv_build=i386-apple-darwin12.3.0
2108	ac_cv_build_alias=i386-apple-darwin12.3.0
2109	ac_cv_c_compiler_gnu=yes
2110	ac_cv_env_CC_set=set
2111	ac_cv_env_CC_value=/usr/bin/clang
2112	ac_cv_env_CFLAGS_set=set
2113	ac_cv_env_CFLAGS_value='-pipe -O2 -arch x86_64 -arch i386'
2114	ac_cv_env_CPPFLAGS_set=set
2115	ac_cv_env_CPPFLAGS_value=-I/opt/local/include
2116	ac_cv_env_CPP_set=
2117	ac_cv_env_CPP_value=
2118	ac_cv_env_LDFLAGS_set=set
2119	ac_cv_env_LDFLAGS_value='-L/opt/local/lib -arch x86_64 -arch i386'
2120	ac_cv_env_build_alias_set=
2121	ac_cv_env_build_alias_value=
2122	ac_cv_env_host_alias_set=
2123	ac_cv_env_host_alias_value=
2124	ac_cv_env_target_alias_set=
2125	ac_cv_env_target_alias_value=
2126	ac_cv_exeext=
2127	ac_cv_host=i386-apple-darwin12.3.0
2128	ac_cv_host_alias=i386-apple-darwin12.3.0
2129	ac_cv_lib_fl_yywrap=no
2130	ac_cv_lib_l_yywrap=no
2131	ac_cv_objext=o
2132	ac_cv_prog_AWK=gawk
2133	ac_cv_prog_BISON=bison
2134	ac_cv_prog_CAT=cat
2135	ac_cv_prog_CP=cp
2136	ac_cv_prog_CPP='/usr/bin/clang -E'
2137	ac_cv_prog_DIFF=diff
2138	ac_cv_prog_GREP=grep
2139	ac_cv_prog_LEX=flex
2140	ac_cv_prog_MV=mv
2141	ac_cv_prog_RM=rm
2142	ac_cv_prog_SED=sed
2143	ac_cv_prog_ac_ct_CC=/usr/bin/clang
2144	ac_cv_prog_cc_g=yes
2145	ac_cv_prog_cc_stdc=
2146	ac_cv_prog_lex_root=lex.yy
2147	ac_cv_prog_lex_yytext_pointer=no
2148	ac_cv_prog_make_make_set=yes
2149	ac_cv_target=i386-apple-darwin12.3.0
2150	ac_cv_target_alias=i386-apple-darwin12.3.0
2151	ac_cv_use_lcl=yes
2152	am_cv_CC_dependencies_compiler_type=none
2153
2154	## ----------------- ##
2155	## Output variables. ##
2156	## ----------------- ##
2157
2158	ACLOCAL='${SHELL} /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_splint/splint/work/splint-3.1.2/config/missing --run aclocal-1.6'
2159	AMDEPBACKSLASH=''
2160	AMDEP_FALSE=''
2161	AMDEP_TRUE='#'
2162	AMTAR='${SHELL} /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_splint/splint/work/splint-3.1.2/config/missing --run tar'
2163	AUTOCONF='${SHELL} /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_splint/splint/work/splint-3.1.2/config/missing --run autoconf'
2164	AUTOHEADER='${SHELL} /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_splint/splint/work/splint-3.1.2/config/missing --run autoheader'
2165	AUTOMAKE='${SHELL} /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_splint/splint/work/splint-3.1.2/config/missing --run automake-1.6'
2166	AWK='gawk'
2167	BISON='bison'
2168	CAT='cat'
2169	CC='/usr/bin/clang'
2170	CCDEPMODE='depmode=none'
2171	CFLAGS='-pipe -O2 -arch x86_64 -arch i386'
2172	CP='cp'
2173	CPP='/usr/bin/clang -E'
2174	CPPFLAGS='-I/opt/local/include'
2175	DEFS='-DHAVE_CONFIG_H'
2176	DEPDIR='.deps'
2177	DIFF='diff'
2178	ECHO_C='ECHO_N=''
2179	ECHO_T=''
2180	EXEEXT=''
2181	GREP='grep'
2182	INSTALL_DATA='${INSTALL} -m 644'
2183	INSTALL_PROGRAM='${INSTALL}'
2184	INSTALL_SCRIPT='${INSTALL}'
2185	INSTALL_STRIP_PROGRAM='${SHELL} $(install_sh) -c -s'
2186	LCLOBJ='$(lcl_OBJECTS)'
2187	LDFLAGS='-L/opt/local/lib -arch x86_64 -arch i386'
2188	LEX='flex'
2189	LEXLIB=''
2190	LEX_OUTPUT_ROOT='lex.yy'
2191	LIBOBJS=''
2192	LIBS=''
2193	LN_S='ln -s'
2194	LTLIBOBJS=''
2195	MAKEINFO='${SHELL} /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_splint/splint/work/splint-3.1.2/config/missing --run makeinfo'
2196	MV='mv'
2197	OBJEXT='o'
2198	PACKAGE='splint'
2199	PACKAGE_BUGREPORT='splint-bug@splint.org'
2200	PACKAGE_NAME='Splint'
2201	PACKAGE_STRING='Splint 3.1.2'
2202	PACKAGE_TARNAME='splint'
2203	PACKAGE_VERSION='3.1.2'
2204	PATH_SEPARATOR=':'
2205	RM='rm'
2206	SED='sed'
2207	SET_MAKE=''
2208	SHELL='/bin/sh'
2209	STRIP=''
2210	VERSION='3.1.2'
2211	ac_ct_CC='/usr/bin/clang'
2212	ac_ct_STRIP=''
2213	am__include='include'
2214	am__quote=''
2215	bindir='${exec_prefix}/bin'
2216	build='i386-apple-darwin12.3.0'
2217	build_alias=''
2218	build_cpu='i386'
2219	build_os='darwin12.3.0'
2220	build_vendor='apple'
2221	datadir='${prefix}/share'
2222	exec_prefix='${prefix}'
2223	host='i386-apple-darwin12.3.0'
2224	host_alias=''
2225	host_cpu='i386'
2226	host_os='darwin12.3.0'
2227	host_vendor='apple'
2228	includedir='${prefix}/include'
2229	infodir='/opt/local/share/info'
2230	install_sh='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_splint/splint/work/splint-3.1.2/config/install-sh'
2231	libdir='${exec_prefix}/lib'
2232	libexecdir='${exec_prefix}/libexec'
2233	localstatedir='${prefix}/var'
2234	mandir='/opt/local/share/man'
2235	oldincludedir='/usr/include'
2236	prefix='/opt/local'
2237	program_transform_name='s,x,x,'
2238	sbindir='${exec_prefix}/sbin'
2239	sharedstatedir='${prefix}/com'
2240	sysconfdir='${prefix}/etc'
2241	target='i386-apple-darwin12.3.0'
2242	target_alias=''
2243	target_cpu='i386'
2244	target_os='darwin12.3.0'
2245	target_vendor='apple'
2246
2247	## ----------- ##
2248	## confdefs.h. ##
2249	## ----------- ##
2250
2251	#define BUILD "i386-apple-darwin12.3.0"
2252	#define BUILD_ALIAS ""
2253	#define BUILD_CPU "i386"
2254	#define BUILD_OS "darwin12.3.0"
2255	#define BUILD_VENDOR "apple"
2256	#define DEFAULT_LARCHPATH ".:/opt/local/share/splint/lib:/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_splint/splint/work/splint-3.1.2/lib:"
2257	#define DEFAULT_LCLIMPORTDIR ".:/opt/local/share/splint/imports:/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_splint/splint/work/splint-3.1.2/imports"
2258	#define GCC_INCLUDE_DIR "/usr/include"
2259	#define GCC_INCLUDE_DIR2 "/opt/local/include"
2260	#define HOST "i386-apple-darwin12.3.0"
2261	#define HOST_ALIAS ""
2262	#define HOST_CPU "i386"
2263	#define HOST_OS "darwin12.3.0"
2264	#define HOST_VENDOR "apple"
2265	#define LCL_COMPILE "Compiled using /usr/bin/clang -pipe -O2 -arch x86_64 -arch i386 on Darwin gl00b05046.cats.gwu.edu 12.3.0 Darwin Kernel Version 12.3.0: Sun Jan 6 22:37:10 PST 2013; root:xnu-2050.22.13~1/RELEASE_X86_64 x86_64 by macports"
2266	#define LCL_PARSE_VERSION "Splint 3.1.2"
2267	#define PACKAGE_BUGREPORT "splint-bug@splint.org"
2268	#define PACKAGE_NAME "Splint"
2269	#define PACKAGE_STRING "Splint 3.1.2"
2270	#define PACKAGE_TARNAME "splint"
2271	#define PACKAGE_VERSION "3.1.2"
2272	#define SPLINT_VERSION "Splint 3.1.2 --- 28 Apr 2013"
2273	#define SYSTEM_LIBDIR "/opt/local/include"
2274	#define TARGET "i386-apple-darwin12.3.0"
2275	#define TARGET_ALIAS ""
2276	#define TARGET_CPU "i386"
2277	#define TARGET_OS "darwin12.3.0"
2278	#define TARGET_VENDOR "apple"
2279	#define UNAME "Darwin"
2280	#define UNIX 1
2281
2282	configure: exit 0

Download in other formats:

Original Format