Ticket #39064: main.log

File main.log, 47.1 KB (added by veedeehjay@…, 11 years ago)

main.log' resulting from sudo port clean vile; sudo port install vile'

Line 
1version:1
2:debug:main epoch: in tree: 0 installed: 0
3:debug:main flex 2.5.37_1 exists in the ports tree
4:debug:main flex 2.5.37_1  is the latest installed
5:debug:main flex 2.5.37_1  is active
6:debug:main Merging existing variants '' into variants
7:debug:main new fully merged portvariants:
8:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/flex
9:debug:main OS darwin/12.3.0 (Mac OS X 10.8) arch i386
10:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
11:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
12:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
13:debug:main adding the default universal variant
14:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
15:debug:main No need to upgrade! flex 2.5.37_1 >= flex 2.5.37_1
16:debug:main epoch: in tree: 0 installed: 0
17:debug:main gettext 0.18.2.1_0 exists in the ports tree
18:debug:main gettext 0.18.2.1_0  is the latest installed
19:debug:main gettext 0.18.2.1_0  is active
20:debug:main Merging existing variants '' into variants
21:debug:main new fully merged portvariants:
22:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gettext
23:debug:main OS darwin/12.3.0 (Mac OS X 10.8) arch i386
24:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
25:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
26:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
27:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/compiler_blacklist_versions-1.0.tcl
28:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
29:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
30:debug:main compiler clang 425.0.28 not blacklisted because does not match {clang < 211.10.1}
31:debug:main universal variant already exists, so not adding the default one
32:debug:main No need to upgrade! gettext 0.18.2.1_0 >= gettext 0.18.2.1_0
33:debug:main epoch: in tree: 0 installed: 0
34:debug:main expat 2.1.0_0 exists in the ports tree
35:debug:main expat 2.1.0_0  is the latest installed
36:debug:main expat 2.1.0_0  is active
37:debug:main Merging existing variants '' into variants
38:debug:main new fully merged portvariants:
39:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/expat
40:debug:main OS darwin/12.3.0 (Mac OS X 10.8) arch i386
41:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
42:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
43:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
44:debug:main adding the default universal variant
45:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
46:debug:main No need to upgrade! expat 2.1.0_0 >= expat 2.1.0_0
47:debug:main epoch: in tree: 0 installed: 0
48:debug:main libiconv 1.14_0 exists in the ports tree
49:debug:main libiconv 1.14_0  is the latest installed
50:debug:main libiconv 1.14_0  is active
51:debug:main Merging existing variants '' into variants
52:debug:main new fully merged portvariants:
53:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libiconv
54:debug:main OS darwin/12.3.0 (Mac OS X 10.8) arch i386
55:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
56:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
57:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
58:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
59:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
60:debug:main universal variant already exists, so not adding the default one
61:debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0
62:debug:main epoch: in tree: 0 installed: 0
63:debug:main ncurses 5.9_2 exists in the ports tree
64:debug:main ncurses 5.9_2  is the latest installed
65:debug:main ncurses 5.9_2  is active
66:debug:main Merging existing variants '' into variants
67:debug:main new fully merged portvariants:
68:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/ncurses
69:debug:main OS darwin/12.3.0 (Mac OS X 10.8) arch i386
70:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
71:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
72:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
73:debug:main adding the default universal variant
74:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
75:debug:main No need to upgrade! ncurses 5.9_2 >= ncurses 5.9_2
76:debug:main epoch: in tree: 0 installed: 0
77:debug:main m4 1.4.16_0 exists in the ports tree
78:debug:main m4 1.4.16_0  is the latest installed
79:debug:main m4 1.4.16_0  is active
80:debug:main Merging existing variants '' into variants
81:debug:main new fully merged portvariants:
82:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/m4
83:debug:main OS darwin/12.3.0 (Mac OS X 10.8) arch i386
84:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
85:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
86:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
87:debug:main adding the default universal variant
88:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
89:debug:main No need to upgrade! m4 1.4.16_0 >= m4 1.4.16_0
90:msg:main --->  Computing dependencies for vile:info:main .:debug:main vile has no conflicts
91:debug:main Searching for dependency: flex
92:debug:main Found Dependency: receipt exists for flex
93:debug:main Searching for dependency: ncurses
94:debug:main Found Dependency: receipt exists for ncurses
95:debug:main Searching for dependency: libiconv
96:debug:main Found Dependency: receipt exists for libiconv
97:msg:main
98:debug:main Executing org.macports.main (vile)
99:debug:main changing euid/egid - current euid: 0 - current egid: 0
100:debug:main egid changed to: 501
101:debug:main euid changed to: 502
102:debug:archivefetch archivefetch phase started at Fri May 10 20:07:10 CEST 2013
103:msg:archivefetch --->  Fetching archive for vile
104:debug:archivefetch Executing org.macports.archivefetch (vile)
105:debug:archivefetch euid/egid changed to: 0/0
106:debug:archivefetch chowned /opt/local/var/macports/incoming to macports
107:debug:archivefetch euid/egid changed to: 502/501
108:info:archivefetch --->  vile-9.8_0.darwin_12.x86_64.tbz2 doesn't seem to exist in /opt/local/var/macports/incoming/verified
109:msg:archivefetch --->  Attempting to fetch vile-9.8_0.darwin_12.x86_64.tbz2 from http://mse.uk.packages.macports.org/sites/packages.macports.org/vile
110:debug:archivefetch Fetching archive failed:: The requested URL returned error: 404
111:msg:archivefetch --->  Attempting to fetch vile-9.8_0.darwin_12.x86_64.tbz2 from http://lil.fr.packages.macports.org/vile
112:debug:archivefetch Fetching archive failed:: The requested URL returned error: 404
113:msg:archivefetch --->  Attempting to fetch vile-9.8_0.darwin_12.x86_64.tbz2 from http://packages.macports.org/vile
114:debug:archivefetch Fetching archive failed:: The requested URL returned error: 404
115:debug:archivefetch Privilege de-escalation not attempted as not running as root.
116:debug:fetch fetch phase started at Fri May 10 20:07:14 CEST 2013
117:notice:fetch --->  Fetching distfiles for vile
118:debug:fetch Executing org.macports.fetch (vile)
119:debug:fetch Privilege de-escalation not attempted as not running as root.
120:debug:checksum checksum phase started at Fri May 10 20:07:14 CEST 2013
121:notice:checksum --->  Verifying checksum(s) for vile
122:debug:checksum Executing org.macports.checksum (vile)
123:info:checksum --->  Checksumming vile-9.8.tgz
124:debug:checksum Correct (sha1) checksum for vile-9.8.tgz
125:debug:checksum Correct (rmd160) checksum for vile-9.8.tgz
126:debug:checksum Privilege de-escalation not attempted as not running as root.
127:debug:extract extract phase started at Fri May 10 20:07:14 CEST 2013
128:notice:extract --->  Extracting vile
129:debug:extract Executing org.macports.extract (vile)
130:info:extract --->  Extracting vile-9.8.tgz
131:debug:extract setting option extract.args to '/opt/local/var/macports/distfiles/vile/vile-9.8.tgz'
132:debug:extract Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_editors_vile/vile/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.8'
133:debug:extract Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_editors_vile/vile/work" && /usr/bin/gzip -dc '/opt/local/var/macports/distfiles/vile/vile-9.8.tgz' | /usr/bin/gnutar --no-same-owner -xf -'
134:debug:extract Executing command line:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_editors_vile/vile/work" && /usr/bin/gzip -dc '/opt/local/var/macports/distfiles/vile/vile-9.8.tgz' | /usr/bin/gnutar --no-same-owner -xf -
135:debug:extract euid/egid changed to: 0/0
136:debug:extract chowned /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_editors_vile/vile/work to macports
137:debug:extract euid/egid changed to: 502/501
138:debug:extract Privilege de-escalation not attempted as not running as root.
139:debug:patch patch phase started at Fri May 10 20:07:14 CEST 2013
140:debug:patch Executing org.macports.patch (vile)
141:debug:patch Privilege de-escalation not attempted as not running as root.
142:debug:configure configure phase started at Fri May 10 20:07:14 CEST 2013
143:notice:configure --->  Configuring vile
144:debug:configure Using compiler 'Mac OS X clang'
145:debug:configure Executing org.macports.configure (vile)
146:debug:configure Environment: CPATH='/opt/local/include' CFLAGS='-pipe -O2 -arch x86_64' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-pipe -O2 -arch x86_64' LIBRARY_PATH='/opt/local/lib' MACOSX_DEPLOYMENT_TARGET='10.8' CXX='/usr/bin/clang++' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_editors_vile/vile/work/.CC_PRINT_OPTIONS' F90FLAGS='-pipe -O2 -m64' LDFLAGS='-L/opt/local/lib -arch x86_64' OBJC='/usr/bin/clang' FCFLAGS='-pipe -O2 -m64' INSTALL='/usr/bin/install -c' OBJCFLAGS='-pipe -O2 -arch x86_64' FFLAGS='-pipe -O2 -m64' CC_PRINT_OPTIONS='YES' CC='/usr/bin/clang'
147:debug:configure Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_editors_vile/vile/work/vile-9.8" && ./configure --prefix=/opt/local --with-perl --with-ncurses --mandir=/opt/local/share/man'
148:debug:configure Executing command line:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_editors_vile/vile/work/vile-9.8" && ./configure --prefix=/opt/local --with-perl --with-ncurses --mandir=/opt/local/share/man
149:info:configure checking build system type... x86_64-apple-darwin12.3.0
150:info:configure checking host system type... x86_64-apple-darwin12.3.0
151:info:configure Configuring for darwin12.3.0
152:info:configure checking for gcc... /usr/bin/clang
153:info:configure checking for C compiler default output... a.out
154:info:configure checking whether the C compiler works... yes
155:info:configure checking whether we are cross compiling... no
156:info:configure checking for executable suffix...
157:info:configure checking for object suffix... o
158:info:configure checking whether we are using the GNU C compiler... yes
159:info:configure checking whether /usr/bin/clang accepts -g... yes
160:info:configure checking how to run the C preprocessor... /usr/bin/clang -E
161:info:configure checking whether /usr/bin/clang needs -traditional... no
162:info:configure checking for AIX... no
163:info:configure checking for POSIXized ISC... no
164:info:configure checking for minix/config.h... no
165:info:configure checking for /usr/bin/clang option to accept ANSI C... -DCC_HAS_PROTOS
166:info:configure checking for /usr/bin/clang option to accept ANSI C... none needed
167:info:configure checking for an ANSI C-conforming const... yes
168:info:configure checking for inline... inline
169:info:configure checking if we can initialize unions... yes
170:info:configure checking if SIGWINCH is defined... yes
171:info:configure checking for reflex... no
172:info:configure checking for flex... flex
173:info:configure checking for yywrap in -lfl... yes
174:info:configure checking lex output file root... lex.yy
175:info:configure checking whether yytext is a pointer... yes
176:info:configure checking for makeflags variable...
177:info:configure checking for a BSD compatible install... /usr/bin/install -c
178:info:configure checking whether make sets ${MAKE}... yes
179:info:configure checking for mawk... no
180:info:configure checking for gawk... gawk
181:info:configure checking for ranlib... ranlib
182:info:configure checking whether ln -s works... yes
183:info:configure checking for archiver (symbol AR)... ar
184:info:configure checking for archiver options (symbol AR_OPTS)... rv
185:info:configure checking if you want to see long compiling messages... yes
186:info:configure checking if you wish to build only core functions... no
187:info:configure checking if you wish to disable shell/external commands... no
188:info:configure checking for CFLAGS options...
189:info:configure checking if you want to compile-in plugin support... no
190:info:configure checking if you want to build syntax filters... yes
191:info:configure checking if you want built-in syntax filters... none
192:info:configure checking if you want loadable syntax filters... none
193:info:configure checking if any filters are built-in/loadable... no
194:info:configure checking if flex is really flex... yes
195:info:configure checking version of flex... 2.5.37
196:info:configure checking for library path... $(libdir)/vile
197:info:configure checking for startup path... $(datadir)
198:info:configure checking if flex supports %pointer... yes
199:info:configure checking if flex supports character classes... yes
200:info:configure checking if flex supports options... yes
201:info:configure checking if flex supports states... yes
202:info:configure checking if you want to use perl as an extension language... yes
203:info:configure checking for perl-5.004... perl
204:info:configure checking for getpwnam... yes
205:info:configure checking for lint... no
206:info:configure checking for alint... no
207:info:configure checking for splint... no
208:info:configure checking for lclint... no
209:info:configure checking for ANSI C header files... yes
210:info:configure checking for dirent.h that defines DIR... yes
211:info:configure checking for opendir in -ldir... no
212:info:configure checking for nl_langinfo and CODESET... yes
213:info:configure checking for fcntl.h... yes
214:info:configure checking for ioctl.h... no
215:info:configure checking for limits.h... yes
216:info:configure checking for memory.h... yes
217:info:configure checking for poll.h... yes
218:info:configure checking for pwd.h... yes
219:info:configure checking for search.h... yes
220:info:configure checking for select.h... no
221:info:configure checking for setjmp.h... yes
222:info:configure checking for sgtty.h... yes
223:info:configure checking for signal.h... yes
224:info:configure checking for stdarg.h... yes
225:info:configure checking for stddef.h... yes
226:info:configure checking for stdlib.h... yes
227:info:configure checking for string.h... yes
228:info:configure checking for sys/filio.h... yes
229:info:configure checking for sys/ioctl.h... yes
230:info:configure checking for sys/itimer.h... no
231:info:configure checking for sys/param.h... yes
232:info:configure checking for sys/resource.h... yes
233:info:configure checking for sys/select.h... yes
234:info:configure checking for sys/socket.h... yes
235:info:configure checking for sys/time.h... yes
236:info:configure checking for sys/wait.h... yes
237:info:configure checking for termio.h... no
238:info:configure checking for termios.h... yes
239:info:configure checking for unistd.h... yes
240:info:configure checking for utime.h... yes
241:info:configure checking for varargs.h... no
242:info:configure checking return type of signal handlers... void
243:info:configure checking for sys/types.h... yes
244:info:configure checking for sys/stat.h... yes
245:info:configure checking for stdlib.h... (cached) yes
246:info:configure checking for string.h... (cached) yes
247:info:configure checking for memory.h... (cached) yes
248:info:configure checking for strings.h... yes
249:info:configure checking for inttypes.h... yes
250:info:configure checking for stdint.h... yes
251:info:configure checking for unistd.h... (cached) yes
252:info:configure checking for size_t... yes
253:info:configure checking for uid_t in sys/types.h... yes
254:info:configure checking for pid_t... yes
255:info:configure checking for time_t... yes
256:info:configure checking for intptr_t... yes
257:info:configure checking whether setvbuf arguments are reversed... no
258:info:configure checking whether stat file-mode macros are broken... no
259:info:configure checking for struct stat.st_blksize... yes
260:info:configure checking for struct stat.st_blocks... yes
261:info:configure checking for struct stat.st_rdev... yes
262:info:configure checking whether struct tm is in sys/time.h or time.h... time.h
263:info:configure checking whether time.h and sys/time.h may both be included... yes
264:info:configure checking if we can include select.h with time.h... yes
265:info:configure checking if we may include sys/resource.h with sys/wait.h... no
266:info:configure checking for termio.h... (cached) no
267:info:configure checking for termios.h... (cached) yes
268:info:configure checking for unistd.h... (cached) yes
269:info:configure checking whether termios.h needs _POSIX_SOURCE... no
270:info:configure checking declaration of size-change... yes
271:info:configure checking for file-pointer ready definition... ( (p)->_r > 0)
272:info:configure checking for <wctype.h> and functions... yes
273:info:configure checking for library containing wctype... none required
274:info:configure checking for long file names... yes
275:info:configure checking for restartable reads on pipes... yes
276:info:configure checking for va_copy... yes
277:info:configure checking for __va_copy... yes
278:info:configure checking whether setpgrp takes no argument... yes
279:info:configure checking whether getpgrp takes no argument... yes
280:info:configure checking if killpg is needed... no
281:info:configure checking if external errno is declared... yes
282:info:configure checking if external errno exists... yes
283:info:configure checking if external environ is declared... no
284:info:configure checking if external environ exists... yes
285:info:configure checking if external sys_nerr is declared... yes
286:info:configure checking if external sys_nerr exists... yes
287:info:configure checking if external sys_errlist is declared... yes
288:info:configure checking if external sys_errlist exists... yes
289:info:configure checking for screen type... termcap
290:info:configure checking if you want to use ncurses... yes
291:info:configure Looking for ncurses-config
292:info:configure checking for ncurses6-config... no
293:info:configure checking for ncurses5-config... /opt/local/bin/ncurses5-config
294:info:configure checking if we have identified curses headers... curses.h
295:info:configure checking for curses.h... yes
296:info:configure checking for symbolic link to create to vile... no
297:info:configure checking for /dev/tty... yes
298:info:configure checking for crypt function... yes
299:info:configure checking if crypt works... yes
300:info:configure checking for X11/Xpoll.h... yes
301:info:configure checking for declaration of fd_set... sys/types.h
302:info:configure checking for fd_set macros... yes
303:info:configure checking for getc_unlocked... yes
304:info:configure checking for putc_unlocked... yes
305:info:configure checking if we should define _REENTRANT... no
306:info:configure checking for _nc_freeall... yes
307:info:configure checking for access... yes
308:info:configure checking for alarm... yes
309:info:configure checking for crypt... yes
310:info:configure checking for getcwd... yes
311:info:configure checking for getegid... yes
312:info:configure checking for geteuid... yes
313:info:configure checking for gethostname... yes
314:info:configure checking for getpass... yes
315:info:configure checking for gettimeofday... yes
316:info:configure checking for getwd... yes
317:info:configure checking for isblank... yes
318:info:configure checking for iswblank... yes
319:info:configure checking for killpg... yes
320:info:configure checking for mkdir... yes
321:info:configure checking for mkdtemp... yes
322:info:configure checking for poll... yes
323:info:configure checking for popen... yes
324:info:configure checking for putenv... yes
325:info:configure checking for realpath... yes
326:info:configure checking for select... yes
327:info:configure checking for setbuffer... yes
328:info:configure checking for setgid... yes
329:info:configure checking for setitimer... yes
330:info:configure checking for setsid... yes
331:info:configure checking for setuid... yes
332:info:configure checking for setvbuf... yes
333:info:configure checking for sigaction... yes
334:info:configure checking for sigprocmask... yes
335:info:configure checking for strchr... yes
336:info:configure checking for strerror... yes
337:info:configure checking for strftime... yes
338:info:configure checking for strrchr... yes
339:info:configure checking for strtoul... yes
340:info:configure checking for symlink... yes
341:info:configure checking for tcgetattr... yes
342:info:configure checking for tdestroy... no
343:info:configure checking for tsearch... yes
344:info:configure checking for ttyname... yes
345:info:configure checking for umask... yes
346:info:configure checking for utime... yes
347:info:configure checking for utimes... yes
348:info:configure checking for waitpid... yes
349:info:configure checking for tigetint... no
350:info:configure checking for tigetnum... yes
351:info:configure checking for tparam... no
352:info:configure checking for tparm... yes
353:info:configure checking for working mkstemp... yes
354:info:configure checking if you want to change the number of exec-macros... no
355:info:configure checking for special C compiler options needed for large files... no
356:info:configure checking for _FILE_OFFSET_BITS value needed for large files... no
357:info:configure checking for _LARGE_FILES value needed for large files... no
358:info:configure checking for _LARGEFILE_SOURCE value needed for large files... no
359:info:configure checking for fseeko... yes
360:info:configure checking whether to use struct dirent64... no
361:info:configure checking for setlocale()... yes
362:info:configure checking if you want to use i18n locale support... yes
363:info:configure checking if you want to use iconv() for locale support... yes
364:info:configure checking for iconv... yes
365:info:configure checking if the declaration of iconv() needs const.... no
366:info:configure checking if you want to use dmalloc for testing... no
367:info:configure checking if you want to use dbmalloc for testing... no
368:info:configure checking if you want to use purify for testing... no
369:info:configure checking if you want to use valgrind for testing... no
370:info:configure checking if you want to perform memory-leak testing...
371:info:configure checking version of /usr/bin/clang... 4.2
372:info:configure checking if you want to check for gcc warnings... no
373:info:configure checking for missing "environ" extern... yes
374:info:configure checking for missing "getenv" extern... no
375:info:configure checking for missing "getpass" extern... no
376:info:configure checking for missing "getwd" extern... no
377:info:configure checking for missing "malloc" extern... yes
378:info:configure checking for missing "realloc" extern... yes
379:info:configure checking for missing "rindex" extern... yes
380:info:configure checking for missing "strerror" extern... yes
381:info:configure checking for missing "strtol" extern... no
382:info:configure checking for term.h... term.h
383:info:configure checking if we should include curses.h or termcap.h... term.h
384:info:configure checking declaration of tputs 3rd param... int OutChar(int)
385:info:configure checking for missing "tigetint" extern... yes
386:info:configure checking for missing "tigetnum" extern... no
387:info:configure checking for missing "tparam" extern... yes
388:info:configure checking for missing "tparm" extern... no
389:info:configure checking for missing "tgoto" extern... no
390:info:configure checking for missing "tigetstr" extern... no
391:info:configure checking for missing "tputs" extern... no
392:info:configure checking for missing "tigetflag" extern... no
393:info:configure checking for ispell... ispell
394:info:configure Computing location to install filter programs: $(libdir)/vile
395:info:configure checking if filesystem supports mixed-case filenames... no
396:info:configure checking for exctags... no
397:info:configure checking for ctags... ctags
398:info:configure checking for exetags... no
399:info:configure checking for etags... etags
400:info:configure checking for ctags... yes
401:info:configure checking for an rpath option...
402:info:configure checking if rpath should be not be set... no
403:info:configure checking for updated LDFLAGS... configure: creating ./config.status
404:info:configure config.status: creating makefile
405:info:configure config.status: creating filters/makefile
406:info:configure config.status: creating filters/makefile.tmp
407:info:configure config.status: creating config.h
408:info:configure ** no change to ./filters/genmake.mak
409:info:configure Checking for built-in filters: none
410:info:configure Checking for external filters: all
411:info:configure Checking for loadable filters: none
412:debug:configure Privilege de-escalation not attempted as not running as root.
413:debug:build build phase started at Fri May 10 20:07:29 CEST 2013
414:notice:build --->  Building vile
415:debug:build Executing org.macports.build (vile)
416:debug:build Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_editors_vile/vile/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.8'
417:debug:build Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_editors_vile/vile/work/vile-9.8" && /usr/bin/make -j4 -w all'
418:debug:build Executing command line:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_editors_vile/vile/work/vile-9.8" && /usr/bin/make -j4 -w all
419:info:build make: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_editors_vile/vile/work/vile-9.8'
420:info:build /usr/bin/clang -I. -I. -DHAVE_CONFIG_H -I/opt/local/include  -D_DARWIN_C_SOURCE  -DPERL_DARWIN -I/opt/local/include -I/opt/local/include -I/opt/local/lib/perl5/5.12.4/darwin-thread-multi-2level/CORE -I/opt/local/include -pipe -O2 -arch x86_64  -pipe -O2 -fno-common -no-cpp-precomp -fno-strict-aliasing -fstack-protector  -L/opt/local/lib -arch x86_64  \
421:info:build         -o ./mktbls  ./mktbls.c
422:info:build perl /opt/local/lib/perl5/5.12.4/ExtUtils/xsubpp \
423:info:build             -typemap /opt/local/lib/perl5/5.12.4/ExtUtils/typemap \
424:info:build             -typemap ptypemap \
425:info:build             ./perl.xs > perl.c
426:info:build ./mktbls ./cmdtbl
427:info:build ./mktbls ./modetbl
428:info:build cd filters && /usr/bin/make prefix=/opt/local DESTDIR= all
429:info:build /usr/bin/clang -c -I. -I. -DHAVE_CONFIG_H -I/opt/local/include  -D_DARWIN_C_SOURCE  -DPERL_DARWIN -I/opt/local/include -I/opt/local/include -I/opt/local/lib/perl5/5.12.4/darwin-thread-multi-2level/CORE -I/opt/local/include -DPROGRAM_NAME=\"vile\" -DVILE_ICON=\"icons/vile\" -DVILE_LIBDIR_PATH=\"'/opt/local/lib/vile'\" -DVILE_STARTUP_PATH=\"'/opt/local/share/vile'\" -pipe -O2 -arch x86_64  -pipe -O2 -fno-common -no-cpp-precomp -fno-strict-aliasing -fstack-protector  -DHELP_LOC=\"/opt/local/share/vile\" tcap.c
430:info:build /usr/bin/clang -c -I. -I. -DHAVE_CONFIG_H -I/opt/local/include  -D_DARWIN_C_SOURCE  -DPERL_DARWIN -I/opt/local/include -I/opt/local/include -I/opt/local/lib/perl5/5.12.4/darwin-thread-multi-2level/CORE -I/opt/local/include -DPROGRAM_NAME=\"vile\" -DVILE_ICON=\"icons/vile\" -DVILE_LIBDIR_PATH=\"'/opt/local/lib/vile'\" -DVILE_STARTUP_PATH=\"'/opt/local/share/vile'\" -pipe -O2 -arch x86_64  -pipe -O2 -fno-common -no-cpp-precomp -fno-strict-aliasing -fstack-protector  -DHELP_LOC=\"/opt/local/share/vile\" main.c
431:info:build /usr/bin/clang -c -I. -I. -DHAVE_CONFIG_H -I/opt/local/include  -D_DARWIN_C_SOURCE  -DPERL_DARWIN -I/opt/local/include -I/opt/local/include -I/opt/local/lib/perl5/5.12.4/darwin-thread-multi-2level/CORE -I/opt/local/include -DPROGRAM_NAME=\"vile\" -DVILE_ICON=\"icons/vile\" -DVILE_LIBDIR_PATH=\"'/opt/local/lib/vile'\" -DVILE_STARTUP_PATH=\"'/opt/local/share/vile'\" -pipe -O2 -arch x86_64  -pipe -O2 -fno-common -no-cpp-precomp -fno-strict-aliasing -fstack-protector  -DHELP_LOC=\"/opt/local/share/vile\" basic.c
432:info:build make[1]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_editors_vile/vile/work/vile-9.8/filters'
433:info:build /usr/bin/clang -c -I. -I.. -I../filters -I.. -DHAVE_CONFIG_H -I/opt/local/include  -D_DARWIN_C_SOURCE  -DPERL_DARWIN -I/opt/local/include -I/opt/local/include -I/opt/local/lib/perl5/5.12.4/darwin-thread-multi-2level/CORE -I/opt/local/include -DVILE_STARTUP_PATH=\"/opt/local/share/vile\" -pipe -O2 -arch x86_64  -pipe -O2 -fno-common -no-cpp-precomp -fno-strict-aliasing -fstack-protector  atr2ansi.c
434:info:build /usr/bin/clang -c -I. -I.. -I../filters -I.. -DHAVE_CONFIG_H -I/opt/local/include  -D_DARWIN_C_SOURCE  -DPERL_DARWIN -I/opt/local/include -I/opt/local/include -I/opt/local/lib/perl5/5.12.4/darwin-thread-multi-2level/CORE -I/opt/local/include -DVILE_STARTUP_PATH=\"/opt/local/share/vile\" -pipe -O2 -arch x86_64  -pipe -O2 -fno-common -no-cpp-precomp -fno-strict-aliasing -fstack-protector  unfilter.c
435:info:build /usr/bin/clang -c -I. -I.. -I../filters -I.. -DHAVE_CONFIG_H -I/opt/local/include  -D_DARWIN_C_SOURCE  -DPERL_DARWIN -I/opt/local/include -I/opt/local/include -I/opt/local/lib/perl5/5.12.4/darwin-thread-multi-2level/CORE -I/opt/local/include -DVILE_STARTUP_PATH=\"/opt/local/share/vile\" -pipe -O2 -arch x86_64  -pipe -O2 -fno-common -no-cpp-precomp -fno-strict-aliasing -fstack-protector  atr2html.c
436:info:build /usr/bin/clang -c -I. -I.. -I../filters -I.. -DHAVE_CONFIG_H -I/opt/local/include  -D_DARWIN_C_SOURCE  -DPERL_DARWIN -I/opt/local/include -I/opt/local/include -I/opt/local/lib/perl5/5.12.4/darwin-thread-multi-2level/CORE -I/opt/local/include -DVILE_STARTUP_PATH=\"/opt/local/share/vile\" -pipe -O2 -arch x86_64  -pipe -O2 -fno-common -no-cpp-precomp -fno-strict-aliasing -fstack-protector  atr2text.c
437:info:build /usr/bin/clang -c -I. -I.. -I../filters -I.. -DHAVE_CONFIG_H -I/opt/local/include  -D_DARWIN_C_SOURCE  -DPERL_DARWIN -I/opt/local/include -I/opt/local/include -I/opt/local/lib/perl5/5.12.4/darwin-thread-multi-2level/CORE -I/opt/local/include -DVILE_STARTUP_PATH=\"/opt/local/share/vile\" -pipe -O2 -arch x86_64  -pipe -O2 -fno-common -no-cpp-precomp -fno-strict-aliasing -fstack-protector  ecrypt.c
438:info:build /usr/bin/clang -c -I. -I.. -I../filters -I.. -DHAVE_CONFIG_H -I/opt/local/include  -D_DARWIN_C_SOURCE  -DPERL_DARWIN -I/opt/local/include -I/opt/local/include -I/opt/local/lib/perl5/5.12.4/darwin-thread-multi-2level/CORE -I/opt/local/include -DVILE_STARTUP_PATH=\"/opt/local/share/vile\" -pipe -O2 -arch x86_64  -pipe -O2 -fno-common -no-cpp-precomp -fno-strict-aliasing -fstack-protector  manfilt.c
439:info:build /usr/bin/clang -c -I. -I. -DHAVE_CONFIG_H -I/opt/local/include  -D_DARWIN_C_SOURCE  -DPERL_DARWIN -I/opt/local/include -I/opt/local/include -I/opt/local/lib/perl5/5.12.4/darwin-thread-multi-2level/CORE -I/opt/local/include -DPROGRAM_NAME=\"vile\" -DVILE_ICON=\"icons/vile\" -DVILE_LIBDIR_PATH=\"'/opt/local/lib/vile'\" -DVILE_STARTUP_PATH=\"'/opt/local/share/vile'\" -pipe -O2 -arch x86_64  -pipe -O2 -fno-common -no-cpp-precomp -fno-strict-aliasing -fstack-protector  -DHELP_LOC=\"/opt/local/share/vile\" bind.c
440:info:build /usr/bin/clang -c -I. -I. -DHAVE_CONFIG_H -I/opt/local/include  -D_DARWIN_C_SOURCE  -DPERL_DARWIN -I/opt/local/include -I/opt/local/include -I/opt/local/lib/perl5/5.12.4/darwin-thread-multi-2level/CORE -I/opt/local/include -DPROGRAM_NAME=\"vile\" -DVILE_ICON=\"icons/vile\" -DVILE_LIBDIR_PATH=\"'/opt/local/lib/vile'\" -DVILE_STARTUP_PATH=\"'/opt/local/share/vile'\" -pipe -O2 -arch x86_64  -pipe -O2 -fno-common -no-cpp-precomp -fno-strict-aliasing -fstack-protector  -DHELP_LOC=\"/opt/local/share/vile\" blist.c
441:info:build /usr/bin/clang -c -I. -I.. -I../filters -I.. -DHAVE_CONFIG_H -I/opt/local/include  -D_DARWIN_C_SOURCE  -DPERL_DARWIN -I/opt/local/include -I/opt/local/include -I/opt/local/lib/perl5/5.12.4/darwin-thread-multi-2level/CORE -I/opt/local/include -DVILE_STARTUP_PATH=\"/opt/local/share/vile\" -pipe -O2 -arch x86_64  -pipe -O2 -fno-common -no-cpp-precomp -fno-strict-aliasing -fstack-protector  c-filt.c
442:info:build /usr/bin/clang -c -I. -I. -DHAVE_CONFIG_H -I/opt/local/include  -D_DARWIN_C_SOURCE  -DPERL_DARWIN -I/opt/local/include -I/opt/local/include -I/opt/local/lib/perl5/5.12.4/darwin-thread-multi-2level/CORE -I/opt/local/include -DPROGRAM_NAME=\"vile\" -DVILE_ICON=\"icons/vile\" -DVILE_LIBDIR_PATH=\"'/opt/local/lib/vile'\" -DVILE_STARTUP_PATH=\"'/opt/local/share/vile'\" -pipe -O2 -arch x86_64  -pipe -O2 -fno-common -no-cpp-precomp -fno-strict-aliasing -fstack-protector  -DHELP_LOC=\"/opt/local/share/vile\" buffer.c
443:info:build /usr/bin/clang -c -I. -I.. -I../filters -I.. -DHAVE_CONFIG_H -I/opt/local/include  -D_DARWIN_C_SOURCE  -DPERL_DARWIN -I/opt/local/include -I/opt/local/include -I/opt/local/lib/perl5/5.12.4/darwin-thread-multi-2level/CORE -I/opt/local/include -DVILE_STARTUP_PATH=\"/opt/local/share/vile\" -pipe -O2 -arch x86_64  -pipe -O2 -fno-common -no-cpp-precomp -fno-strict-aliasing -fstack-protector  filterio.c
444:info:build /usr/bin/clang -c -I. -I. -DHAVE_CONFIG_H -I/opt/local/include  -D_DARWIN_C_SOURCE  -DPERL_DARWIN -I/opt/local/include -I/opt/local/include -I/opt/local/lib/perl5/5.12.4/darwin-thread-multi-2level/CORE -I/opt/local/include -DPROGRAM_NAME=\"vile\" -DVILE_ICON=\"icons/vile\" -DVILE_LIBDIR_PATH=\"'/opt/local/lib/vile'\" -DVILE_STARTUP_PATH=\"'/opt/local/share/vile'\" -pipe -O2 -arch x86_64  -pipe -O2 -fno-common -no-cpp-precomp -fno-strict-aliasing -fstack-protector  -DHELP_LOC=\"/opt/local/share/vile\" csrch.c
445:info:build /usr/bin/clang -c -I. -I. -DHAVE_CONFIG_H -I/opt/local/include  -D_DARWIN_C_SOURCE  -DPERL_DARWIN -I/opt/local/include -I/opt/local/include -I/opt/local/lib/perl5/5.12.4/darwin-thread-multi-2level/CORE -I/opt/local/include -DPROGRAM_NAME=\"vile\" -DVILE_ICON=\"icons/vile\" -DVILE_LIBDIR_PATH=\"'/opt/local/lib/vile'\" -DVILE_STARTUP_PATH=\"'/opt/local/share/vile'\" -pipe -O2 -arch x86_64  -pipe -O2 -fno-common -no-cpp-precomp -fno-strict-aliasing -fstack-protector  -DHELP_LOC=\"/opt/local/share/vile\" display.c
446:info:build /usr/bin/clang -c -I. -I.. -I../filters -I.. -DHAVE_CONFIG_H -I/opt/local/include  -D_DARWIN_C_SOURCE  -DPERL_DARWIN -I/opt/local/include -I/opt/local/include -I/opt/local/lib/perl5/5.12.4/darwin-thread-multi-2level/CORE -I/opt/local/include -DVILE_STARTUP_PATH=\"/opt/local/share/vile\" -pipe -O2 -arch x86_64  -pipe -O2 -fno-common -no-cpp-precomp -fno-strict-aliasing -fstack-protector  filters.c
447:info:build /usr/bin/clang -c -I. -I. -DHAVE_CONFIG_H -I/opt/local/include  -D_DARWIN_C_SOURCE  -DPERL_DARWIN -I/opt/local/include -I/opt/local/include -I/opt/local/lib/perl5/5.12.4/darwin-thread-multi-2level/CORE -I/opt/local/include -DPROGRAM_NAME=\"vile\" -DVILE_ICON=\"icons/vile\" -DVILE_LIBDIR_PATH=\"'/opt/local/lib/vile'\" -DVILE_STARTUP_PATH=\"'/opt/local/share/vile'\" -pipe -O2 -arch x86_64  -pipe -O2 -fno-common -no-cpp-precomp -fno-strict-aliasing -fstack-protector  -DHELP_LOC=\"/opt/local/share/vile\" dumbterm.c
448:info:build /usr/bin/clang -c -I. -I.. -I../filters -I.. -DHAVE_CONFIG_H -I/opt/local/include  -D_DARWIN_C_SOURCE  -DPERL_DARWIN -I/opt/local/include -I/opt/local/include -I/opt/local/lib/perl5/5.12.4/darwin-thread-multi-2level/CORE -I/opt/local/include -DVILE_STARTUP_PATH=\"/opt/local/share/vile\" -pipe -O2 -arch x86_64  -pipe -O2 -fno-common -no-cpp-precomp -fno-strict-aliasing -fstack-protector  key-filt.c
449:info:build /usr/bin/clang -c -I. -I.. -I../filters -I.. -DHAVE_CONFIG_H -I/opt/local/include  -D_DARWIN_C_SOURCE  -DPERL_DARWIN -I/opt/local/include -I/opt/local/include -I/opt/local/lib/perl5/5.12.4/darwin-thread-multi-2level/CORE -I/opt/local/include -DVILE_STARTUP_PATH=\"/opt/local/share/vile\" -pipe -O2 -arch x86_64  -pipe -O2 -fno-common -no-cpp-precomp -fno-strict-aliasing -fstack-protector  m4-filt.c
450:info:build /usr/bin/clang -c -I. -I.. -I../filters -I.. -DHAVE_CONFIG_H -I/opt/local/include  -D_DARWIN_C_SOURCE  -DPERL_DARWIN -I/opt/local/include -I/opt/local/include -I/opt/local/lib/perl5/5.12.4/darwin-thread-multi-2level/CORE -I/opt/local/include -DVILE_STARTUP_PATH=\"/opt/local/share/vile\" -pipe -O2 -arch x86_64  -pipe -O2 -fno-common -no-cpp-precomp -fno-strict-aliasing -fstack-protector  pl-filt.c
451:info:build /usr/bin/clang -c -I. -I. -DHAVE_CONFIG_H -I/opt/local/include  -D_DARWIN_C_SOURCE  -DPERL_DARWIN -I/opt/local/include -I/opt/local/include -I/opt/local/lib/perl5/5.12.4/darwin-thread-multi-2level/CORE -I/opt/local/include -DPROGRAM_NAME=\"vile\" -DVILE_ICON=\"icons/vile\" -DVILE_LIBDIR_PATH=\"'/opt/local/lib/vile'\" -DVILE_STARTUP_PATH=\"'/opt/local/share/vile'\" -pipe -O2 -arch x86_64  -pipe -O2 -fno-common -no-cpp-precomp -fno-strict-aliasing -fstack-protector  -DHELP_LOC=\"/opt/local/share/vile\" eval.c
452:info:build /usr/bin/clang -c -I. -I. -DHAVE_CONFIG_H -I/opt/local/include  -D_DARWIN_C_SOURCE  -DPERL_DARWIN -I/opt/local/include -I/opt/local/include -I/opt/local/lib/perl5/5.12.4/darwin-thread-multi-2level/CORE -I/opt/local/include -DPROGRAM_NAME=\"vile\" -DVILE_ICON=\"icons/vile\" -DVILE_LIBDIR_PATH=\"'/opt/local/lib/vile'\" -DVILE_STARTUP_PATH=\"'/opt/local/share/vile'\" -pipe -O2 -arch x86_64  -pipe -O2 -fno-common -no-cpp-precomp -fno-strict-aliasing -fstack-protector  -DHELP_LOC=\"/opt/local/share/vile\" exec.c
453:info:build /usr/bin/clang -c -I. -I. -DHAVE_CONFIG_H -I/opt/local/include  -D_DARWIN_C_SOURCE  -DPERL_DARWIN -I/opt/local/include -I/opt/local/include -I/opt/local/lib/perl5/5.12.4/darwin-thread-multi-2level/CORE -I/opt/local/include -DPROGRAM_NAME=\"vile\" -DVILE_ICON=\"icons/vile\" -DVILE_LIBDIR_PATH=\"'/opt/local/lib/vile'\" -DVILE_STARTUP_PATH=\"'/opt/local/share/vile'\" -pipe -O2 -arch x86_64  -pipe -O2 -fno-common -no-cpp-precomp -fno-strict-aliasing -fstack-protector  -DHELP_LOC=\"/opt/local/share/vile\" externs.c
454:info:build /usr/bin/clang -c -I. -I.. -I../filters -I.. -DHAVE_CONFIG_H -I/opt/local/include  -D_DARWIN_C_SOURCE  -DPERL_DARWIN -I/opt/local/include -I/opt/local/include -I/opt/local/lib/perl5/5.12.4/darwin-thread-multi-2level/CORE -I/opt/local/include -DVILE_STARTUP_PATH=\"/opt/local/share/vile\" -pipe -O2 -arch x86_64  -pipe -O2 -fno-common -no-cpp-precomp -fno-strict-aliasing -fstack-protector  rubyfilt.c
455:info:build /usr/bin/clang -c -I. -I.. -I../filters -I.. -DHAVE_CONFIG_H -I/opt/local/include  -D_DARWIN_C_SOURCE  -DPERL_DARWIN -I/opt/local/include -I/opt/local/include -I/opt/local/lib/perl5/5.12.4/darwin-thread-multi-2level/CORE -I/opt/local/include -DVILE_STARTUP_PATH=\"/opt/local/share/vile\" -pipe -O2 -arch x86_64  -pipe -O2 -fno-common -no-cpp-precomp -fno-strict-aliasing -fstack-protector  sed-filt.c
456:info:build /usr/bin/clang -c -I. -I. -DHAVE_CONFIG_H -I/opt/local/include  -D_DARWIN_C_SOURCE  -DPERL_DARWIN -I/opt/local/include -I/opt/local/include -I/opt/local/lib/perl5/5.12.4/darwin-thread-multi-2level/CORE -I/opt/local/include -DPROGRAM_NAME=\"vile\" -DVILE_ICON=\"icons/vile\" -DVILE_LIBDIR_PATH=\"'/opt/local/lib/vile'\" -DVILE_STARTUP_PATH=\"'/opt/local/share/vile'\" -pipe -O2 -arch x86_64  -pipe -O2 -fno-common -no-cpp-precomp -fno-strict-aliasing -fstack-protector  -DHELP_LOC=\"/opt/local/share/vile\" fences.c
457:info:build /usr/bin/clang -c -I. -I. -DHAVE_CONFIG_H -I/opt/local/include  -D_DARWIN_C_SOURCE  -DPERL_DARWIN -I/opt/local/include -I/opt/local/include -I/opt/local/lib/perl5/5.12.4/darwin-thread-multi-2level/CORE -I/opt/local/include -DPROGRAM_NAME=\"vile\" -DVILE_ICON=\"icons/vile\" -DVILE_LIBDIR_PATH=\"'/opt/local/lib/vile'\" -DVILE_STARTUP_PATH=\"'/opt/local/share/vile'\" -pipe -O2 -arch x86_64  -pipe -O2 -fno-common -no-cpp-precomp -fno-strict-aliasing -fstack-protector  -DHELP_LOC=\"/opt/local/share/vile\" file.c
458:info:build /usr/bin/clang -c -I. -I. -DHAVE_CONFIG_H -I/opt/local/include  -D_DARWIN_C_SOURCE  -DPERL_DARWIN -I/opt/local/include -I/opt/local/include -I/opt/local/lib/perl5/5.12.4/darwin-thread-multi-2level/CORE -I/opt/local/include -DPROGRAM_NAME=\"vile\" -DVILE_ICON=\"icons/vile\" -DVILE_LIBDIR_PATH=\"'/opt/local/lib/vile'\" -DVILE_STARTUP_PATH=\"'/opt/local/share/vile'\" -pipe -O2 -arch x86_64  -pipe -O2 -fno-common -no-cpp-precomp -fno-strict-aliasing -fstack-protector  -DHELP_LOC=\"/opt/local/share/vile\" filec.c
459:info:build /usr/bin/clang -c -I. -I.. -I../filters -I.. -DHAVE_CONFIG_H -I/opt/local/include  -D_DARWIN_C_SOURCE  -DPERL_DARWIN -I/opt/local/include -I/opt/local/include -I/opt/local/lib/perl5/5.12.4/darwin-thread-multi-2level/CORE -I/opt/local/include -DVILE_STARTUP_PATH=\"/opt/local/share/vile\" -pipe -O2 -arch x86_64  -pipe -O2 -fno-common -no-cpp-precomp -fno-strict-aliasing -fstack-protector  tagsfilt.c
460:info:build echo "#include <flt_defs.h>" > ada-filt.c
461:info:build flex -t ada-filt.l >> ada-filt.c
462:info:build /usr/bin/clang -c -I. -I.. -I../filters -I.. -DHAVE_CONFIG_H -I/opt/local/include  -D_DARWIN_C_SOURCE  -DPERL_DARWIN -I/opt/local/include -I/opt/local/include -I/opt/local/lib/perl5/5.12.4/darwin-thread-multi-2level/CORE -I/opt/local/include -pipe -O2 -arch x86_64  -pipe -O2 -fno-common -no-cpp-precomp -fno-strict-aliasing -fstack-protector  ada-filt.c
463:info:build echo "#include <flt_defs.h>" > as-filt.c
464:info:build flex -t as-filt.l >> as-filt.c
465:info:build <stdout>:527:11: error: conflicting types for 'yyget_leng'
466:info:build yy_size_t yyget_leng (void );
467:info:build           ^
468:info:build ./filters.h:213:12: note: previous declaration is here
469:info:build extern int yyget_leng (void);
470:info:build            ^
471:info:build <stdout>:1636:11: error: conflicting types for 'yyget_leng'
472:info:build yy_size_t yyget_leng  (void)
473:info:build           ^
474:info:build ./filters.h:213:12: note: previous declaration is here
475:info:build extern int yyget_leng (void);
476:info:build            ^
477:info:build 2 errors generated.
478:info:build make[1]: *** [ada-filt.o] Error 1
479:info:build make[1]: *** Waiting for unfinished jobs....
480:info:build /usr/bin/clang -c -I. -I. -DHAVE_CONFIG_H -I/opt/local/include  -D_DARWIN_C_SOURCE  -DPERL_DARWIN -I/opt/local/include -I/opt/local/include -I/opt/local/lib/perl5/5.12.4/darwin-thread-multi-2level/CORE -I/opt/local/include -DPROGRAM_NAME=\"vile\" -DVILE_ICON=\"icons/vile\" -DVILE_LIBDIR_PATH=\"'/opt/local/lib/vile'\" -DVILE_STARTUP_PATH=\"'/opt/local/share/vile'\" -pipe -O2 -arch x86_64  -pipe -O2 -fno-common -no-cpp-precomp -fno-strict-aliasing -fstack-protector  -DHELP_LOC=\"/opt/local/share/vile\" fileio.c
481:info:build /usr/bin/clang -c -I. -I.. -I../filters -I.. -DHAVE_CONFIG_H -I/opt/local/include  -D_DARWIN_C_SOURCE  -DPERL_DARWIN -I/opt/local/include -I/opt/local/include -I/opt/local/lib/perl5/5.12.4/darwin-thread-multi-2level/CORE -I/opt/local/include -pipe -O2 -arch x86_64  -pipe -O2 -fno-common -no-cpp-precomp -fno-strict-aliasing -fstack-protector  as-filt.c
482:info:build /usr/bin/clang -c -I. -I. -DHAVE_CONFIG_H -I/opt/local/include  -D_DARWIN_C_SOURCE  -DPERL_DARWIN -I/opt/local/include -I/opt/local/include -I/opt/local/lib/perl5/5.12.4/darwin-thread-multi-2level/CORE -I/opt/local/include -DPROGRAM_NAME=\"vile\" -DVILE_ICON=\"icons/vile\" -DVILE_LIBDIR_PATH=\"'/opt/local/lib/vile'\" -DVILE_STARTUP_PATH=\"'/opt/local/share/vile'\" -pipe -O2 -arch x86_64  -pipe -O2 -fno-common -no-cpp-precomp -fno-strict-aliasing -fstack-protector  -DHELP_LOC=\"/opt/local/share/vile\" finderr.c
483:info:build <stdout>:600:11: error: conflicting types for 'yyget_leng'
484:info:build yy_size_t yyget_leng (void );
485:info:build           ^
486:info:build ./filters.h:213:12: note: previous declaration is here
487:info:build extern int yyget_leng (void);
488:info:build            ^
489:info:build <stdout>:1783:11: error: conflicting types for 'yyget_leng'
490:info:build yy_size_t yyget_leng  (void)
491:info:build           ^
492:info:build ./filters.h:213:12: note: previous declaration is here
493:info:build extern int yyget_leng (void);
494:info:build            ^
495:info:build 2 errors generated.
496:info:build make[1]: *** [as-filt.o] Error 1
497:info:build make[1]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_editors_vile/vile/work/vile-9.8/filters'
498:info:build make: *** [all] Error 2
499:info:build make: *** Waiting for unfinished jobs....
500:info:build make: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_editors_vile/vile/work/vile-9.8'
501:info:build Command failed:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_editors_vile/vile/work/vile-9.8" && /usr/bin/make -j4 -w all
502:info:build Exit code: 2
503:error:build org.macports.build for port vile returned: command execution failed
504:debug:build Error code: CHILDSTATUS 5107 2
505:debug:build Backtrace: command execution failed
506    while executing
507"system -nice 0 $fullcmdstring"
508    ("eval" body line 1)
509    invoked from within
510"eval system $notty $nice \$fullcmdstring"
511    invoked from within
512"command_exec build"
513    (procedure "portbuild::build_main" line 8)
514    invoked from within
515"$procedure $targetname"
516:info:build Warning: targets not executed for vile: org.macports.activate org.macports.build org.macports.destroot org.macports.install
517:notice:build Please see the log file for port vile for details:
518    /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_editors_vile/vile/main.log