| 1 | version:1 |
|---|
| 2 | :msg:clean ---> Computing dependencies for py27-qutip:info:clean .:debug:clean py27-qutip has no conflicts |
|---|
| 3 | :debug:clean Searching for dependency: gcc48 |
|---|
| 4 | :debug:clean Found Dependency: receipt exists for gcc48 |
|---|
| 5 | :debug:clean Searching for dependency: python27 |
|---|
| 6 | :debug:clean Found Dependency: receipt exists for python27 |
|---|
| 7 | :debug:clean Searching for dependency: py27-cython |
|---|
| 8 | :debug:clean Found Dependency: receipt exists for py27-cython |
|---|
| 9 | :debug:clean Searching for dependency: py27-ipython |
|---|
| 10 | :debug:clean Found Dependency: receipt exists for py27-ipython |
|---|
| 11 | :debug:clean Searching for dependency: py27-matplotlib |
|---|
| 12 | :debug:clean Found Dependency: receipt exists for py27-matplotlib |
|---|
| 13 | :debug:clean Searching for dependency: py27-numpy |
|---|
| 14 | :debug:clean Found Dependency: receipt exists for py27-numpy |
|---|
| 15 | :debug:clean Searching for dependency: py27-scipy |
|---|
| 16 | :debug:clean Found Dependency: receipt exists for py27-scipy |
|---|
| 17 | :debug:clean Searching for dependency: libgcc |
|---|
| 18 | :debug:clean Found Dependency: receipt exists for libgcc |
|---|
| 19 | :msg:clean |
|---|
| 20 | :debug:main Executing org.macports.main (py27-qutip) |
|---|
| 21 | :debug:main changing euid/egid - current euid: 0 - current egid: 0 |
|---|
| 22 | :debug:main egid changed to: 501 |
|---|
| 23 | :debug:main euid changed to: 503 |
|---|
| 24 | :debug:archivefetch archivefetch phase started at Wed Aug 6 14:36:24 MDT 2014 |
|---|
| 25 | :msg:archivefetch ---> Fetching archive for py27-qutip |
|---|
| 26 | :debug:archivefetch Executing proc-pre-org.macports.archivefetch-archivefetch-0 |
|---|
| 27 | :debug:archivefetch Active variants check for archivefetch-type install considers depends_lib depends_run: python27 py27-cython py27-ipython py27-matplotlib py27-numpy py27-scipy libgcc |
|---|
| 28 | :debug:archivefetch py27-ipython is installed with the following variants: +notebook+parallel+pyqt4+scientific |
|---|
| 29 | :debug:archivefetch required: notebook parallel scientific, forbidden: |
|---|
| 30 | :debug:archivefetch accepted |
|---|
| 31 | :debug:archivefetch py27-matplotlib is installed with the following variants: +cairo+gtk2+latex+qt4+tkinter |
|---|
| 32 | :debug:archivefetch required: latex, forbidden: |
|---|
| 33 | :debug:archivefetch accepted |
|---|
| 34 | :debug:archivefetch Executing org.macports.archivefetch (py27-qutip) |
|---|
| 35 | :debug:archivefetch euid/egid changed to: 0/0 |
|---|
| 36 | :debug:archivefetch chowned /opt/local/var/macports/incoming to macports |
|---|
| 37 | :debug:archivefetch euid/egid changed to: 503/501 |
|---|
| 38 | :info:archivefetch ---> py27-qutip-3.0.1_0+gcc48.darwin_13.x86_64.tbz2 doesn't seem to exist in /opt/local/var/macports/incoming/verified |
|---|
| 39 | :msg:archivefetch ---> Attempting to fetch py27-qutip-3.0.1_0+gcc48.darwin_13.x86_64.tbz2 from http://packages.macports.org/py27-qutip |
|---|
| 40 | :debug:archivefetch Fetching archive failed: The requested URL returned error: 404 Not Found |
|---|
| 41 | :msg:archivefetch ---> Attempting to fetch py27-qutip-3.0.1_0+gcc48.darwin_13.x86_64.tbz2 from http://nue.de.packages.macports.org/macports/packages/py27-qutip |
|---|
| 42 | :debug:archivefetch Fetching archive failed: The requested URL returned error: 404 Not Found |
|---|
| 43 | :msg:archivefetch ---> Attempting to fetch py27-qutip-3.0.1_0+gcc48.darwin_13.x86_64.tbz2 from http://lil.fr.packages.macports.org/py27-qutip |
|---|
| 44 | :debug:archivefetch Fetching archive failed: The requested URL returned error: 404 Not Found |
|---|
| 45 | :debug:archivefetch Privilege de-escalation not attempted as not running as root. |
|---|
| 46 | :debug:fetch fetch phase started at Wed Aug 6 14:36:25 MDT 2014 |
|---|
| 47 | :notice:fetch ---> Fetching distfiles for py27-qutip |
|---|
| 48 | :debug:fetch Can't run fetch on this port without elevated privileges. Escalating privileges back to root. |
|---|
| 49 | :debug:fetch euid changed to: 0. egid changed to: 0. |
|---|
| 50 | :debug:fetch changing euid/egid - current euid: 0 - current egid: 0 |
|---|
| 51 | :debug:fetch egid changed to: 501 |
|---|
| 52 | :debug:fetch euid changed to: 503 |
|---|
| 53 | :debug:fetch Executing org.macports.fetch (py27-qutip) |
|---|
| 54 | :info:fetch ---> qutip-3.0.1.tar.gz doesn't seem to exist in /opt/local/var/macports/distfiles/py-qutip |
|---|
| 55 | :notice:fetch ---> Attempting to fetch qutip-3.0.1.tar.gz from http://sea.us.distfiles.macports.org/macports/distfiles/py-qutip |
|---|
| 56 | :debug:fetch Fetching distfile failed: The requested URL returned error: 404 Not Found |
|---|
| 57 | :notice:fetch ---> Attempting to fetch qutip-3.0.1.tar.gz from http://distfiles.macports.org/py-qutip |
|---|
| 58 | :debug:fetch Fetching distfile failed: The requested URL returned error: 404 Not Found |
|---|
| 59 | :notice:fetch ---> Attempting to fetch qutip-3.0.1.tar.gz from http://qutip.org/downloads/3.0.1/ |
|---|
| 60 | :debug:fetch Privilege de-escalation not attempted as not running as root. |
|---|
| 61 | :debug:checksum checksum phase started at Wed Aug 6 14:36:28 MDT 2014 |
|---|
| 62 | :notice:checksum ---> Verifying checksums for py27-qutip |
|---|
| 63 | :debug:checksum Executing org.macports.checksum (py27-qutip) |
|---|
| 64 | :info:checksum ---> Checksumming qutip-3.0.1.tar.gz |
|---|
| 65 | :debug:checksum Calculated (rmd160) is b27a37dbe7da8aab58e4be88044e8fec2d0f1806 |
|---|
| 66 | :debug:checksum Correct (rmd160) checksum for qutip-3.0.1.tar.gz |
|---|
| 67 | :debug:checksum Calculated (sha256) is 8ec90a59786829fe55dece26a1798661d6174b848eb6bb9622edf270d32d833d |
|---|
| 68 | :debug:checksum Correct (sha256) checksum for qutip-3.0.1.tar.gz |
|---|
| 69 | :debug:checksum Privilege de-escalation not attempted as not running as root. |
|---|
| 70 | :debug:extract extract phase started at Wed Aug 6 14:36:28 MDT 2014 |
|---|
| 71 | :notice:extract ---> Extracting py27-qutip |
|---|
| 72 | :debug:extract Executing org.macports.extract (py27-qutip) |
|---|
| 73 | :info:extract ---> Extracting qutip-3.0.1.tar.gz |
|---|
| 74 | :debug:extract setting option extract.args to '/opt/local/var/macports/distfiles/py-qutip/qutip-3.0.1.tar.gz' |
|---|
| 75 | :debug:extract Environment: |
|---|
| 76 | CC_PRINT_OPTIONS='YES' |
|---|
| 77 | CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_mports_trunk_dports_python_py-qutip/py27-qutip/work/.CC_PRINT_OPTIONS' |
|---|
| 78 | CPATH='/opt/local/include' |
|---|
| 79 | LIBRARY_PATH='/opt/local/lib' |
|---|
| 80 | MACOSX_DEPLOYMENT_TARGET='10.9' |
|---|
| 81 | :debug:extract Assembled command: 'cd "/opt/local/var/macports/build/_opt_mports_trunk_dports_python_py-qutip/py27-qutip/work" && /usr/bin/gzip -dc '/opt/local/var/macports/distfiles/py-qutip/qutip-3.0.1.tar.gz' | /usr/bin/tar -xf -' |
|---|
| 82 | :debug:extract Executing command line: cd "/opt/local/var/macports/build/_opt_mports_trunk_dports_python_py-qutip/py27-qutip/work" && /usr/bin/gzip -dc '/opt/local/var/macports/distfiles/py-qutip/qutip-3.0.1.tar.gz' | /usr/bin/tar -xf - |
|---|
| 83 | :debug:extract euid/egid changed to: 0/0 |
|---|
| 84 | :debug:extract chowned /opt/local/var/macports/build/_opt_mports_trunk_dports_python_py-qutip/py27-qutip/work to macports |
|---|
| 85 | :debug:extract euid/egid changed to: 503/501 |
|---|
| 86 | :debug:extract Privilege de-escalation not attempted as not running as root. |
|---|
| 87 | :debug:patch patch phase started at Wed Aug 6 14:36:28 MDT 2014 |
|---|
| 88 | :debug:patch Executing org.macports.patch (py27-qutip) |
|---|
| 89 | :debug:patch Privilege de-escalation not attempted as not running as root. |
|---|
| 90 | :debug:configure configure phase started at Wed Aug 6 14:36:28 MDT 2014 |
|---|
| 91 | :notice:configure ---> Configuring py27-qutip |
|---|
| 92 | :debug:configure Using compiler 'Xcode Clang' |
|---|
| 93 | :debug:configure Executing proc-pre-org.macports.configure-configure-0 |
|---|
| 94 | :debug:configure Active variants check for source-type install considers depends_fetch depends_extract depends_lib depends_build depends_run: python27 py27-cython py27-ipython py27-matplotlib py27-numpy py27-scipy libgcc gcc48 |
|---|
| 95 | :debug:configure py27-ipython is installed with the following variants: +notebook+parallel+pyqt4+scientific |
|---|
| 96 | :debug:configure required: notebook parallel scientific, forbidden: |
|---|
| 97 | :debug:configure accepted |
|---|
| 98 | :debug:configure py27-matplotlib is installed with the following variants: +cairo+gtk2+latex+qt4+tkinter |
|---|
| 99 | :debug:configure required: latex, forbidden: |
|---|
| 100 | :debug:configure accepted |
|---|
| 101 | :debug:configure Executing org.macports.configure (py27-qutip) |
|---|
| 102 | :debug:configure Privilege de-escalation not attempted as not running as root. |
|---|
| 103 | :debug:build build phase started at Wed Aug 6 14:36:28 MDT 2014 |
|---|
| 104 | :notice:build ---> Building py27-qutip |
|---|
| 105 | :debug:build Executing proc-pre-org.macports.build-build-0 |
|---|
| 106 | :debug:build Executing org.macports.build (py27-qutip) |
|---|
| 107 | :debug:build port disallows a parallel build |
|---|
| 108 | :debug:build Environment: |
|---|
| 109 | CC='/usr/bin/clang' |
|---|
| 110 | CC_PRINT_OPTIONS='YES' |
|---|
| 111 | CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_mports_trunk_dports_python_py-qutip/py27-qutip/work/.CC_PRINT_OPTIONS' |
|---|
| 112 | CFLAGS='-arch x86_64' |
|---|
| 113 | CPATH='/opt/local/include' |
|---|
| 114 | CXX='/usr/bin/clang++' |
|---|
| 115 | CXXFLAGS='-arch x86_64' |
|---|
| 116 | F77='/opt/local/bin/gfortran-mp-4.8' |
|---|
| 117 | F90='/opt/local/bin/gfortran-mp-4.8' |
|---|
| 118 | F90FLAGS='-m64' |
|---|
| 119 | FC='/opt/local/bin/gfortran-mp-4.8' |
|---|
| 120 | FCFLAGS='-m64' |
|---|
| 121 | FFLAGS='-m64' |
|---|
| 122 | LDFLAGS='-undefined dynamic_lookup -bundle -arch x86_64' |
|---|
| 123 | LIBRARY_PATH='/opt/local/lib' |
|---|
| 124 | MACOSX_DEPLOYMENT_TARGET='10.9' |
|---|
| 125 | OBJC='/usr/bin/clang' |
|---|
| 126 | OBJCFLAGS='-arch x86_64' |
|---|
| 127 | :debug:build Assembled command: 'cd "/opt/local/var/macports/build/_opt_mports_trunk_dports_python_py-qutip/py27-qutip/work/qutip-3.0.1" && /opt/local/Library/Frameworks/Python.framework/Versions/2.7/bin/python2.7 setup.py --no-user-cfg build --with-f90mc' |
|---|
| 128 | :debug:build Executing command line: cd "/opt/local/var/macports/build/_opt_mports_trunk_dports_python_py-qutip/py27-qutip/work/qutip-3.0.1" && /opt/local/Library/Frameworks/Python.framework/Versions/2.7/bin/python2.7 setup.py --no-user-cfg build --with-f90mc |
|---|
| 129 | :info:build Traceback (most recent call last): |
|---|
| 130 | :info:build File "setup.py", line 153, in <module> |
|---|
| 131 | :info:build configuration=configuration |
|---|
| 132 | :info:build File "/opt/local/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/site-packages/numpy/distutils/core.py", line 135, in setup |
|---|
| 133 | :info:build config = configuration() |
|---|
| 134 | :info:build File "setup.py", line 129, in configuration |
|---|
| 135 | :info:build config.add_subpackage('qutip') |
|---|
| 136 | :info:build File "/opt/local/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/site-packages/numpy/distutils/misc_util.py", line 966, in add_subpackage |
|---|
| 137 | :info:build caller_level = 2) |
|---|
| 138 | :info:build File "/opt/local/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/site-packages/numpy/distutils/misc_util.py", line 935, in get_subpackage |
|---|
| 139 | :info:build caller_level = caller_level + 1) |
|---|
| 140 | :info:build File "/opt/local/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/site-packages/numpy/distutils/misc_util.py", line 872, in _get_configuration_from_setup_py |
|---|
| 141 | :info:build config = setup_module.configuration(*args) |
|---|
| 142 | :info:build File "qutip/setup.py", line 10, in configuration |
|---|
| 143 | :info:build config.add_subpackage('fortran') |
|---|
| 144 | :info:build File "/opt/local/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/site-packages/numpy/distutils/misc_util.py", line 966, in add_subpackage |
|---|
| 145 | :info:build caller_level = 2) |
|---|
| 146 | :info:build File "/opt/local/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/site-packages/numpy/distutils/misc_util.py", line 935, in get_subpackage |
|---|
| 147 | :info:build caller_level = caller_level + 1) |
|---|
| 148 | :info:build File "/opt/local/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/site-packages/numpy/distutils/misc_util.py", line 872, in _get_configuration_from_setup_py |
|---|
| 149 | :info:build config = setup_module.configuration(*args) |
|---|
| 150 | :info:build File "qutip/fortran/setup.py", line 29, in configuration |
|---|
| 151 | :info:build extra_compile_args=blas_opt['extra_compile_args'] |
|---|
| 152 | :info:build KeyError: 'extra_compile_args' |
|---|
| 153 | :info:build Command failed: cd "/opt/local/var/macports/build/_opt_mports_trunk_dports_python_py-qutip/py27-qutip/work/qutip-3.0.1" && /opt/local/Library/Frameworks/Python.framework/Versions/2.7/bin/python2.7 setup.py --no-user-cfg build --with-f90mc |
|---|
| 154 | :info:build Exit code: 1 |
|---|
| 155 | :error:build Failed to build py27-qutip: command execution failed |
|---|
| 156 | :debug:build Error code: CHILDSTATUS 55505 1 |
|---|
| 157 | :debug:build Backtrace: command execution failed |
|---|
| 158 | while executing |
|---|
| 159 | "system {*}$notty {*}$nice $fullcmdstring" |
|---|
| 160 | invoked from within |
|---|
| 161 | "command_exec build" |
|---|
| 162 | (procedure "portbuild::build_main" line 8) |
|---|
| 163 | invoked from within |
|---|
| 164 | "$procedure $targetname" |
|---|
| 165 | :error:build See /opt/local/var/macports/logs/_opt_mports_trunk_dports_python_py-qutip/py27-qutip/main.log for details. |
|---|
