source: branches/gsoc13-tests/doc/macports.conf.in @ 139170

Last change on this file since 139170 was 111323, checked in by marius@…, 7 years ago

Merge from trunk.

  • Property svn:eol-style set to native
  • Property svn:keywords set to Id
File size: 8.0 KB
Line 
1# $Id: macports.conf.in 111323 2013-09-18 23:11:02Z marius@macports.org $
2
3# MacPorts system-wide configuration file.
4# Commented-out values are defaults unless otherwise noted.
5
6# Directory under which MacPorts should install ports. This must be
7# where MacPorts itself is installed.
8prefix                  @prefix_expanded@
9
10# User to run operations as when MacPorts drops privileges.
11#macportsuser           @RUNUSR@
12
13# Directory for MacPorts working data.
14portdbpath              @localstatedir_expanded@/macports
15
16# Colon-delimited list of directories to search for external tools
17# (make(1), pkg-config(1), etc.). While installing ports, MacPorts uses
18# this list for PATH. Changing this setting is intended for advanced
19# users only and is unsupported.
20#binpath                @prefix_expanded@/bin:@prefix_expanded@/sbin:/bin:/sbin:/usr/bin:/usr/sbin
21
22# Directory containing Xcode Tools. By default, MacPorts determines this
23# using xcode-select(1).
24#developer_dir          @DEVELOPER_DIR@
25
26# Location of PackageMaker. Defaults to
27# "${developer_dir}/Applications/Utilities/PackageMaker.app" with Xcode
28# 4.2 and earlier and "/Applications/PackageMaker.app" with 4.3 and later.
29#packagemaker_path      /Applications/PackageMaker.app
30
31# Directory for application bundles installed by ports.
32applications_dir        @MPAPPLICATIONSDIR@
33
34# Directory for frameworks installed by ports.
35frameworks_dir          @MPFRAMEWORKSDIR@
36
37# Location of the MacPorts sources list.
38sources_conf            @MPCONFIGDIR_EXPANDED@/sources.conf
39
40# Location of the MacPorts global variants definition file. Optional.
41variants_conf           @MPCONFIGDIR_EXPANDED@/variants.conf
42
43# When MacPorts should build ports from source.
44# - ifneeded: Download binary archives if available; build from source
45#   otherwise.
46# - always: Always build from source; never try fetching archives.
47# - never: Never build from source; try fetching archives and abort if
48#   unavailable.
49#buildfromsource        ifneeded
50
51# Type of archive to use for port images. Supported types are cpgz,
52# cpio, tar, tbz, tbz2, tgz, tlz, txz, xar, zip.
53#portarchivetype        tbz2
54
55# CPU architecture to target. Supported values are "ppc", "ppc64",
56# "i386", and "x86_64". Defaults to:
57# - OS X 10.5 and earlier: "ppc" on PowerPC, otherwise "i386".
58# - OS X 10.6 and later: "x86_64" on Intel 64, otherwise "i386".
59#build_arch             i386
60
61# Space-delimited list of CPU architectures to target when building
62# universal. Defaults to "i386 ppc" on OS X 10.5 and earlier and
63# "x64_64 i386" on OS X 10.6 and later.
64universal_archs         @UNIVERSAL_ARCHS@
65
66# Use ccache, a compiler cache for C, C++, Objective-C, and
67# Objective-C++. (See http://ccache.samba.org.) The "ccache" executable
68# must exist in one of the directories in binpath.
69#configureccache        no
70
71# Directory for ccache's cached compiler output.
72#ccache_dir             @localstatedir_expanded@/macports/build/.ccache
73
74# Maximum size of files stored in ccache's cache. Append "G", "M", or
75# "K" for gigabytes, megabytes, or kilobytes.
76#ccache_size            2G
77
78# Use distcc, a distributed compiler for C, C++, Objective-C, and
79# Objective-C++. (See http://distcc.org.) The "distcc" executable must
80# exist in one of the directories in binpath.
81#configuredistcc        no
82
83# Use pipes rather than temporary files for communication between the
84# various stages of C, C++, Objective-C, and Objective-C++ compilation.
85#configurepipe          yes
86
87# Lowered scheduling priority to use for commands run during configure,
88# build, and destroot. Accepted values are 0 (normal priority) through
89# 20 (lowest priority).
90#buildnicevalue         0
91
92# Number of simultaneous make(1) jobs to use when building ports. If set
93# to 0, the number of jobs will be the lesser of:
94# - number of automatically-detected CPU cores
95# - gigabytes of physical memory + 1
96#buildmakejobs          0
97
98# umask value to use when a port installs its files.
99#destroot_umask         022
100
101# Automatically execute "clean" after "install" of ports.
102#portautoclean          yes
103
104# Keep logs after successful installations.
105#keeplogs               no
106
107# The rsync server for fetching MacPorts base during selfupdate. This
108# setting is NOT used when downloading the ports tree; the sources for
109# the ports tree are set in sources.conf. See
110# https://trac.macports.org/wiki/Mirrors#MacPortsSource for a list of
111# available servers.
112#rsync_server           rsync.macports.org
113
114# Location of MacPorts base sources on rsync_server. If this references
115# a .tar file, a signed .rmd160 file must exist in the same directory
116# and will be used to verify its integrity. See
117# https://trac.macports.org/wiki/Mirrors#MacPortsSource to find the
118# correct rsync_dir for a particular rsync_server.
119#rsync_dir              release/tarballs/base.tar
120
121# Options to pass to rsync when fetching MacPorts base and the ports tree.
122#rsync_options          -rtzv --delete-after
123
124# Type of generated StartupItems.
125# - launchd: Create StartupItems for use with launchd.
126# - systemstarter: Create StartupItems for use with SystemStarter.
127# - rcng: Create StartupItems for use with the rc.d system.
128# - default: Create StartupItems for launchd on OS X and for rc.d on
129#   other platforms.
130# - none: Disable creation of StartupItems.
131#startupitem_type       default
132
133# Create system-level symlinks to generated StartupItems. If set to
134# "no", symlinks will not be created; otherwise, symlinks will be placed
135# in /Library/LaunchDaemons or /Library/LaunchAgents as appropriate.
136#startupitem_install    yes
137
138# Extra environment variables to keep. MacPorts sanitizes its
139# environment while processing ports, keeping:
140# - DISPLAY
141# - DYLD_FALLBACK_FRAMEWORK_PATH, DYLD_FALLBACK_LIBRARY_PATH,
142#   DYLD_FRAMEWORK_PATH, DYLD_INSERT_LIBRARIES, DYLD_LIBRARY_PATH
143# - JAVA_HOME
144# - ARCHIVE_SITE_LOCAL, MASTER_SITE_LOCAL, PATCH_SITE_LOCAL
145# - PORTSRC
146# - ALL_PROXY, FTP_PROXY, http_proxy, HTTPS_PROXY, NO_PROXY, RSYNC_PROXY
147# - GROUP, USER
148# - COLUMNS, LINES
149# Variables listed in extra_env are added to this list. This has no
150# default value; setting it is intended for advanced users and is
151# unsupported. (Note that sudo(8) sanitizes its environment on OS X 10.5
152# and later, so it may have to be configured to pass the desired
153# variables to MacPorts.)
154#extra_env              KEEP_THIS THIS_TOO
155
156# Override proxy-related environment variables. By default, MacPorts
157# takes proxy settings from the environment, from the proxy_* options
158# below, and from Network Preferences, in that order. If this is set to
159# "yes", MacPorts uses proxy_*, then Network Preferences, then the
160# environment. (Note that Network Preferences does not have a setting
161# for rsync proxies. Also note that sudo(8) sanitizes its environment on
162# OS X 10.5 and later, so it may have to be configured to pass desired
163# variables to MacPorts.)
164#proxy_override_env     no
165
166# Proxies. These have no default values. The analogous environment
167# variables are "http_proxy", "HTTPS_PROXY", "FTP_PROXY", and
168# "RSYNC_PROXY".
169#proxy_http             proxy1:12345
170#proxy_https            proxy2:67890
171#proxy_ftp              proxy3:02139
172#proxy_rsync            proxy4:11377
173
174# Comma-delimited list of hosts that MacPorts should not access through
175# the HTTP, HTTPS, and FTP proxies. This does not apply to rsync, and it
176# has no default value.
177#proxy_skip             host1, host2, host3
178
179# Space-delimited lists of download hosts that MacPorts should not use
180# and that MacPorts should prefer, respectively, overriding the usual
181# ping time checks. These have no default values.
182#host_blacklist         badhost1 badhost2
183#preferred_hosts        preferredhost1 preferredhost2
184
185# Whether MacPorts should automatically run rev-upgrade after upgrading
186# ports.
187#revupgrade_autorun     yes
188
189# Whether rev-upgrade should automatically rebuild ports with broken
190# linking or merely report the breakage. Supported values are "report"
191# and "rebuild".
192#revupgrade_mode        rebuild
193
194# Space-delimited list of files and directories to delete after the
195# unarchive stage and before creating a pkg. Paths are interpreted
196# relative to prefix, and there is no default value. This is useful for
197# removing unnecessary files and directories prior to pkg or mpkg
198# deployment.
199#pkg_post_unarchive_deletions   include share/doc share/man
Note: See TracBrowser for help on using the repository browser.