# $Id: Makefile.in 28761 2007-09-08 13:59:17Z afb@macports.org $

SUBDIR		= config doc src
DISTDIR		= dist
DISTVER		=
DISTTAG		= release_${subst .,_,${DISTVER}}
DISTNAME	= MacPorts-${DISTVER}
DISTARCTAG	= ${DISTTAG}-archive
DISTARCNAME	= ${DISTNAME}-archive
SVNURL		= http://svn.macports.org/repository/macports
UPGRADECHECK	= ${localstatedir}/macports/.mprename

include Mk/macports.autoconf.mk

all:: Mk/macports.autoconf.mk

Mk/macports.autoconf.mk: Mk/macports.autoconf.mk.in src/config.h.in Makefile.in config.status
	./config.status
	make clean

config.status: configure
	@if test -f ./config.status ; then	\
		set -x ;						\
		./config.status --recheck ;		\
	else								\
		set -x ;						\
		echo "Source tree not configured. Use ./configure" ; \
	fi

upgrade:
	@echo ""; echo "Upgrading your existing MacPorts installation to the new namespace if necessary:"; echo ""

# We can safely delete the ${TCL_PACKAGE_DIR}/darwinports1.0 dir as files in it are always overwritten and will now be installed onto
# ${TCL_PACKAGE_DIR}/macports1.0 with new names:
	[ ! -d ${TCL_PACKAGE_DIR}/darwinports1.0 ] || rm -rf ${TCL_PACKAGE_DIR}/darwinports1.0

# MacPorts base files in ${datadir} are also safely removed as new ones are always installed, and onto a their new location in this case too:
	[ ! -d ${datadir}/darwinports ] || rm -rf ${datadir}/darwinports

# Old version file can be safely deleted, as it was already used to start this upgrade and a new one will be installed into the new location:
	[ ! -f ${sysconfdir}/ports/dp_version ] || rm -vf ${sysconfdir}/ports/dp_version

# Old ports.conf(5) man page is removed:
	[ ! -f ${prefix}/share/man/man5/ports.conf.5 ] || rm -vf ${prefix}/share/man/man5/ports.conf.5

# Conf files directory is renamed:
	[ ! -d ${sysconfdir}/ports ] || mv -v ${sysconfdir}/ports ${sysconfdir}/macports

# Important directories inside ${localstatedir}/db/dports are moved to their new location, creating it first:
	[ -d ${localstatedir}/macports ] || mkdir -vp ${localstatedir}/macports
	for dir in distfiles packages receipts software; do \
		[ ! -d ${localstatedir}/db/dports/$${dir} ] || mv -v ${localstatedir}/db/dports/$${dir} ${localstatedir}/macports ; \
	done

# Move the default ports tree to the new layout:
	[ ! -d ${localstatedir}/db/dports/sources/rsync.rsync.darwinports.org_dpupdate_dports ] || { mkdir -vp \
	${localstatedir}/macports/sources/rsync.macports.org/release && mv -v \
	${localstatedir}/db/dports/sources/rsync.rsync.darwinports.org_dpupdate_dports ${localstatedir}/macports/sources/rsync.macports.org/release/ports ; }

# Open up receipts and upgrade any paths in them containing old conventions to the new namespace:
	for receipt in ${localstatedir}/macports/receipts/*/*/receipt.bz2 ; do [ ! \( -f $${receipt} -a ! -f $${receipt}.mpsaved \) ] || { \
		cp -v $${receipt} $${receipt}.mpsaved && { \
			$(BZIP2) -q -dc $${receipt} | sed 's/db\/dports/macports/g' | $(BZIP2) -q -zf > $${receipt}.new ; \
		} && mv -v $${receipt}.new $${receipt} ; \
	}; done

# Check for existance of the main configuration file and perform a couple of replacements on it, backing it up first:
## 1) new default path up to our configuration files (referenced through other variables);
## 2) new default value for the portdbpath variable;
## 3) new MacPorts rsync server;
## 4) new default value for the base tree;
## 5) new default value for trunk's base sources for users who have it (some do);
## 6) stray quotes are removed from the value of the rsync_options key in old conf files;
## 7) useless --delete option is removed from the default rsync flags (--delete is implied by --delete-after);
## 8) references to the old ports.conf(5) man page are updated to the new macports.conf(5) page;
	[ ! \( -f ${sysconfdir}/macports/ports.conf -a ! -f ${UPGRADECHECK} \) ] || { \
		mv -v ${sysconfdir}/macports/ports.conf ${sysconfdir}/macports/macports.conf.mpsaved; \
		sed 's/etc\/ports/etc\/macports/g' ${sysconfdir}/macports/macports.conf.mpsaved > ${sysconfdir}/macports/macports.conf.tmp && \
			mv -v ${sysconfdir}/macports/macports.conf.tmp ${sysconfdir}/macports/macports.conf; \
		sed 's/db\/dports/macports/g' ${sysconfdir}/macports/macports.conf > ${sysconfdir}/macports/macports.conf.tmp && \
			mv -v ${sysconfdir}/macports/macports.conf.tmp ${sysconfdir}/macports/macports.conf; \
		sed 's/darwinports/macports/g' ${sysconfdir}/macports/macports.conf > ${sysconfdir}/macports/macports.conf.tmp && \
			mv -v ${sysconfdir}/macports/macports.conf.tmp ${sysconfdir}/macports/macports.conf; \
		sed 's/dpupdate1\/base/release\/base/g' ${sysconfdir}/macports/macports.conf > ${sysconfdir}/macports/macports.conf.tmp && \
			mv -v ${sysconfdir}/macports/macports.conf.tmp ${sysconfdir}/macports/macports.conf; \
		sed 's/dpupdate\/base\/\{0,1\}/trunk\/base\//g' ${sysconfdir}/macports/macports.conf > ${sysconfdir}/macports/macports.conf.tmp && \
			mv -v ${sysconfdir}/macports/macports.conf.tmp ${sysconfdir}/macports/macports.conf; \
		sed '/^rsync_options/s/"\(.*\)"/\1/' ${sysconfdir}/macports/macports.conf > ${sysconfdir}/macports/macports.conf.tmp && \
			mv -v ${sysconfdir}/macports/macports.conf.tmp ${sysconfdir}/macports/macports.conf; \
		sed 's/ --delete / /' ${sysconfdir}/macports/macports.conf > ${sysconfdir}/macports/macports.conf.tmp && \
			mv -v ${sysconfdir}/macports/macports.conf.tmp ${sysconfdir}/macports/macports.conf; \
		sed 's/ ports.conf(5)/ macports.conf(5)/g' ${sysconfdir}/macports/macports.conf > ${sysconfdir}/macports/macports.conf.tmp && \
			mv -v ${sysconfdir}/macports/macports.conf.tmp ${sysconfdir}/macports/macports.conf; \
	}

# Check for existance of the main sources file and perform a couple of replacements on it, backing it up first:
## 1) new MacPorts rsync server;
## 2) new default value for the ports tree.
	[ ! \( -f ${sysconfdir}/macports/sources.conf -a ! -f ${UPGRADECHECK} \) ] || { \
		cp -v ${sysconfdir}/macports/sources.conf ${sysconfdir}/macports/sources.conf.mpsaved; \
		sed 's/darwinports/macports/g' ${sysconfdir}/macports/sources.conf > ${sysconfdir}/macports/sources.conf.tmp && \
			mv -v ${sysconfdir}/macports/sources.conf.tmp ${sysconfdir}/macports/sources.conf; \
		sed 's/dpupdate\/dports/release\/ports\//g' ${sysconfdir}/macports/sources.conf > ${sysconfdir}/macports/sources.conf.tmp && \
			mv -v ${sysconfdir}/macports/sources.conf.tmp ${sysconfdir}/macports/sources.conf; \
	}

# Check for existance of a personal configuration file and perform a couple of replacements on it, backing it up first:
## 1) new default path up to our configuration files (referenced through other variables);
## 2) new default value for the portdbpath variable;
## 3) new MacPorts rsync server;
## 4) new default value for the base tree;
## 5) new default value for trunk's base sources for users who have it (some do);
## 6) stray quotes are removed from the value of the rsync_options key in old conf files;
## 7) useless --delete option is removed from the default rsync flags (--delete is implied by --delete-after);
## 8) references to the old ports.conf(5) man page are updated to the new macports.conf(5) page;
	[ ! \( -f $${HOME}/.macports/ports.conf -a ! -f ${UPGRADECHECK} \) ] || { \
		mv -v $${HOME}/.macports/ports.conf $${HOME}/.macports/macports.conf.mpsaved; \
		sed 's/etc\/ports/etc\/macports/g' $${HOME}/.macports/macports.conf.mpsaved > $${HOME}/.macports/macports.conf.tmp && \
			mv -v $${HOME}/.macports/macports.conf.tmp $${HOME}/.macports/macports.conf; \
		sed 's/db\/dports/macports/g' $${HOME}/.macports/macports.conf > $${HOME}/.macports/macports.conf.tmp && \
			mv -v $${HOME}/.macports/macports.conf.tmp $${HOME}/.macports/macports.conf; \
		sed 's/darwinports/macports/g' $${HOME}/.macports/macports.conf > $${HOME}/.macports/macports.conf.tmp && \
			mv -v $${HOME}/.macports/macports.conf.tmp $${HOME}/.macports/macports.conf; \
		sed 's/dpupdate1\/base/release\/base/g' $${HOME}/.macports/macports.conf > $${HOME}/.macports/macports.conf.tmp && \
			mv -v $${HOME}/.macports/macports.conf.tmp $${HOME}/.macports/macports.conf; \
		sed 's/dpupdate\/base\/\{0,1\}/trunk\/base\//g' $${HOME}/.macports/macports.conf > $${HOME}/.macports/macports.conf.tmp && \
			mv -v $${HOME}/.macports/macports.conf.tmp $${HOME}/.macports/macports.conf; \
		sed '/^rsync_options/s/"\(.*\)"/\1/' $${HOME}/.macports/macports.conf > $${HOME}/.macports/macports.conf.tmp && \
			mv -v $${HOME}/.macports/macports.conf.tmp $${HOME}/.macports/macports.conf; \
		sed 's/ --delete / /' $${HOME}/.macports/macports.conf > $${HOME}/.macports/macports.conf.tmp && \
			mv -v $${HOME}/.macports/macports.conf.tmp $${HOME}/.macports/macports.conf; \
		sed 's/ ports.conf(5)/ macports.conf(5)/g' $${HOME}/.macports/macports.conf > $${HOME}/.macports/macports.conf.tmp && \
			mv -v $${HOME}/.macports/macports.conf.tmp $${HOME}/.macports/macports.conf; \
	}

# Upgrade success announcement (meaning we're done ;):
	@[ -f ${UPGRADECHECK} ] || { echo ""; echo "MacPorts installation successfully upgraded from the old DarwinPorts namespace!"; echo ""; \
	echo "MacPorts rename update done!" > ${UPGRADECHECK} ; }


install:: upgrade

include Mk/macports.subdir.mk

install::
	@echo ""; echo "Congratulations, you have successfully installed the MacPorts system. To get the Portfiles and update the system, run:"; echo ""
	@echo "sudo port selfupdate"; echo ""
	@echo "Please read port(1) and the MacPorts Wiki at http://trac.macports.org/ for full documentation."; echo ""
	@echo "Stray sources might have been left in the legacy ${localstatedir}/db/dports directory after this upgrade, which moved most of what it could to ${localstatedir}/macports, so you might want to look in the former and cleanup manually."; echo ""

clean::

distclean::
	rm -f config.log config.status configure.lineno
	rm -rf autom4te.cache ${DISTDIR}
	rm -f Makefile Mk/macports.autoconf.mk

_gettag:
	cd ${DISTDIR}; svn co ${SVNURL}/tags/${SVNTAG} ${PKGNAME}-svn

_pkgdist:
	[ ! -d ${DISTDIR}/${PKGNAME} ] || rm -rf ${DISTDIR}/${PKGNAME}
	cd ${DISTDIR}; svn export ${PKGNAME}-svn ${PKGNAME}
	cd ${DISTDIR}; COPY_EXTENDED_ATTRIBUTES_DISABLE=true tar -c ${PKGNAME} | gzip > ${PKGNAME}.tar.gz
	cd ${DISTDIR}; COPY_EXTENDED_ATTRIBUTES_DISABLE=true tar -c ${PKGNAME} | bzip2 > ${PKGNAME}.tar.bz2
	cd ${DISTDIR}; for type in -md5 -sha1 -ripemd160; do openssl dgst $$type ${PKGNAME}.tar.gz ${PKGNAME}.tar.bz2; done >> ${DISTNAME}.chk.txt

_dopkg: _gettag _pkgdist

# This target fetches a tagged distribution from svn, and generates tarballs and checksums for it
distfromsvn:
	@[ -n "${DISTVER}" ] || { echo Must specify DISTVER, like: make DISTVER=1.4.0 distfromsvn; exit 1; }
	[ -d ${DISTDIR} ] || mkdir ${DISTDIR}
	rm -f ${DISTDIR}/${DISTNAME}.chk.txt
	${MAKE} SVNTAG=${DISTTAG}/base/ PKGNAME=${DISTNAME} _dopkg
ifeq ($(ARC),yes) 
	${MAKE} SVNTAG=${DISTARCTAG} PKGNAME=${DISTARCNAME} _dopkg
endif

tcldoc:
	find src -name '*.tcl' | xargs tcldoc --verbose --title "MacPorts Documentation" --force tcldoc

test::

.PHONY: dist _gettag _pkgdist _dopkg tcldoc