# -*- coding: utf-8; mode: tcl; c-basic-offset: 4; indent-tabs-mode: nil; tab-width: 4; truncate-lines: t -*- vim:fenc=utf-8:et:sw=4:ts=4:sts=4
# $Id: Portfile 69297 2010-06-29 15:50:18Z michaelld@macports.org $

PortSystem          1.0
PortGroup           select 1.0

set select_group    qt4
set select_branch   mac
set select_port     ${select_group}_select
set select_name     ${select_group}-${select_branch}
select.group        ${select_group}

name                ${select_name}
#conflicts           kdelibs3 kdelibs4 xmlrpcxx
version             4.6.3
revision            1
categories          aqua
platforms           macosx
maintainers         michaelld

homepage            http://qt.nokia.com/
description         Qt Tool Kit (Native Aqua Version)
long_description    \
    Qt is a cross-platform application and UI framework for writing \
    cross-platform GUI applications. This version uses the native Aqua UI. \
    For a X11 version, see qt4-x11\[-devel\].

master_sites        trolltech
distname            qt-everywhere-opensource-src-${version}
checksums           md5     5c69f16d452b0bb3d44bc3c10556c072 \
                    sha1    1c18a564df9296c7cb0e0dedde40b9843e1b30e8 \
                    rmd160  ceb3ca78263d0d9cdf92fef903e30c0026db6bff

depends_build       port:pkgconfig port:${select_port}

depends_lib         port:zlib port:dbus port:openssl port:sqlite3 \
                    port:tiff port:libpng port:libmng port:jpeg

# Test for Precompiled-headers support requires a C++ compiler,
# but configure calls it, by default, with a C compiler.
patchfiles          patch-precomp.test.diff

# The build process uses -fconstant-cfstrings.
# configure.compiler should therefore not be one of the MacPorts compilers.

# --prefix is not recognized.
configure.pre_args-delete  --prefix=${prefix}

################################################################################
# We do not want flags of any kind -- QT is smart enough to set up its own.    #
################################################################################

configure.cflags
configure.cppflags
configure.cxxflags
configure.ldflags

configure.universal_cflags
configure.universal_cppflags
configure.universal_cxxflags
configure.universal_ldflags

configure.cc_archflags
configure.cxx_archflags
if {[info exists configure.ld_archflags]} {
    configure.ld_archflags
}

set dirname ${name}
set qt_dir ${prefix}/libexec/${dirname}

#
#  use compiler.cpath and compiler.library_path, as per
#  http://trac.macports.org/ticket/25321 for all -I and -L entries,
#  so-as to avoid conflicts with already-installed headers and
#  libraries (giving preference to internal-to-this-port first)
#
#  CPATH is used instead of -I to avoid conflicts with other ports.
#  See http://trac.macports.org/ticket/15219 and
#  http://trac.macports.org/ticket/18723.
#
# -system-sqlite ensures the use SQLite provided by MacPorts instead of Qt.
#
# -dbus-linked prevends qt4 from trying to dynamically load libdbus-1,
#     which it is not able to find in ${prefix}.
#
# -openssl-linked ensures that the MacPorts openssl is used.
#

configure.args                                            \
    -v                                                    \
    -debug-and-release                                    \
    -confirm-license                                      \
    -opensource                                           \
    -prefix          ${qt_dir}                            \
    -docdir          ${qt_dir}/share/doc/${dirname}       \
    -examplesdir     ${qt_dir}/share/${dirname}/examples  \
    -demosdir        ${qt_dir}/share/${dirname}/demos     \
    -cocoa                                                \
    -system-sqlite                                        \
    -openssl-linked                                       \
    -dbus-linked                                          \
    -arch            \"${build_arch}\"

# Stop configure script from searching for SQL Drivers
#    not available from MacPorts.
foreach driver {db2 ibase oci sqlite_symbian tds} {
    configure.args-append -no-sql-${driver}
}

# By default, disable most SQL Drivers.
# There must be at least one enabled (http://trac.macports.org/ticket/15627).
# SQLite is chosen to be always enabled because a copy of it is distributed
#    with Qt, so it is reasonable for the user to expect it.
foreach driver {mysql odbc psql sqlite2} {
    configure.args-append -no-sql-${driver}
}

variant mysql description {Enable MySQL SQL Driver} {
    depends_lib-append path:lib/mysql5:mysql5
    # reverse the search paths, such that the defaults are searched last
    compiler.cpath ${prefix}/include/mysql5/mysql:${compiler.cpath}
    compiler.library_path ${prefix}/lib/mysql5/mysql:${compiler.library_path}
    configure.args-delete -no-sql-mysql
}

variant odbc description {Enable iODBC SQL Driver} {
    depends_lib-append port:libiodbc
    configure.args-delete -no-sql-odbc
}

variant psql description {Enable PostgreSQL SQL Driver} {
    depends_lib-append port:postgresql83
    # reverse the search paths, such that the defaults are searched last
    compiler.cpath ${prefix}/include/postgresql83:${compiler.cpath}
    compiler.library_path ${prefix}/lib/postgresql83:${compiler.library_path}
    configure.args-delete -no-sql-psql
}

variant sqlite2 description {Enable SQLite version 2 SQL Driver} {
    depends_lib-append port:sqlite2
    configure.args-delete -no-sql-sqlite2
}

variant raster description {Use raster graphics system by default} {
    configure.args-append -graphicssystem raster
}

variant no_demos description {Do not build demo programs} {
   configure.args-append -nomake demos
}

variant no_examples description {Do not build example programs} {
   configure.args-append -nomake examples
}

variant no_debug description {Do not include debugging libraries and pkgconfig files} {
    configure.args-delete -debug-and-release
    configure.args-append -release
}

variant universal {
    configure.universal_args-delete --disable-dependency-tracking
    configure.args-delete -arch \"${build_arch}\"
    configure.args-append -arch \"${universal_archs}\"
    if {[info exists universal_sysroot]} {
        configure.args-append -sdk ${universal_sysroot}
    }
}

# use the 10.4 SDK (the default) for 10.4 only.
# and, build as Carbon by disabling Cocoa.
platform darwin 8 {
    configure.args-delete -cocoa
    post-configure {
        fs-traverse item ${worksrcpath} {
            if {"Makefile" == [file tail ${item}]} {
                reinplace "s|-framework QtHelp|-framework QtHelp -lQtCLucene|" ${item}
            }
        }
    }
}

# use the 10.5 SDK for 10.5 or 10.6,
# but only if not (doing universal and the universal sysroot is set)
platform darwin 9 {
    if {![variant_isset universal] || ![info exists universal_sysroot]} {
        configure.args-append -sdk /Developer/SDKs/MacOSX10.5.sdk/
    }
}

platform darwin 10 {
    if {![variant_isset universal] || ![info exists universal_sysroot]} {
        configure.args-append -sdk /Developer/SDKs/MacOSX10.5.sdk/
    }
}

build.target        first
use_parallel_build  yes

destroot.destdir    INSTALL_ROOT="${destroot}"

post-patch {
    # Ensure that correct compilers are used.
    reinplace "s| g++\$| ${configure.cxx}|" ${worksrcpath}/mkspecs/common/g++.conf
    reinplace "s| gcc\$| ${configure.cc}|"  ${worksrcpath}/mkspecs/common/g++.conf
    reinplace "s| g++\$| ${configure.cxx}|" ${worksrcpath}/mkspecs/macx-g++/qmake.conf
    reinplace "s| gcc\$| ${configure.cc}|"  ${worksrcpath}/mkspecs/macx-g++/qmake.conf
}

post-destroot {
    # Fix .pc and .prl files by changing ${destroot}/lib to ${qt_dir}/lib
    foreach fixfile [glob -nocomplain -directory ${destroot} ${qt_dir}/lib/pkgconfig/* ${qt_dir}/lib/*.prl ${qt_dir}/lib/*/*.prl ${qt_dir}/share/${dirname}/demos/shared/*.prl] {
        reinplace  \
            "s|${worksrcpath}/lib|${qt_dir}/lib|g" \
            ${fixfile}
    }

    # Install documentation.
    foreach doc { INSTALL LGPL_EXCEPTION.txt LICENSE.GPL3 LICENSE.LGPL README } {
        xinstall -c -m 644 ${worksrcpath}/${doc} \
            ${destroot}${qt_dir}/share/doc/${name}
    }
}

post-activate {
    # install the appropriate select file
    if {[variant_isset no_debug]} {
        xinstall -c -m 644 ${filespath}/${select_name}-no-debug \
            ${destroot}${prefix}/etc/select/${select_port}/${select_name}
    } else {
        xinstall -c -m 644 ${filespath}/${select_name} \
            ${destroot}${prefix}/etc/select/${select_port}/${select_name}
    }
    # If this is the first qt4-* installed, select it.
    set current_select [exec ${prefix}/bin/${select_port} -s]
    if {${current_select} == "none"} {
        system "${prefix}/bin/${select_port} ${select_name}"
    } else {
        if {${current_select} != ${select_name}} {
            # Print out the 'select' info.
            ui_msg "\
Port ${current_select} is already selected.\n \
To fully complete this installation and make ${name} the default,\n \
please run:\n \
\tsudo ${select_port} ${select_name}"
        }
    }
}

livecheck.type      regex
livecheck.url       http://get.qt.nokia.com/qt/source/
livecheck.regex     "qt-everywhere-opensource-src-(\[0-9a-z.-\]+)${extract.suffix}"