# -*- coding: utf-8; mode: tcl; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- vim:fenc=utf-8:ft=tcl:et:sw=4:ts=4:sts=4 PortSystem 1.0 name qt55 categories aqua platforms macosx maintainers {mcalhoun @MarcusCalhoun-Lopez} openmaintainer # for OpenSSLException, see source and header files in src/network/ssl of qtbase license {LGPL-2.1 LGPL-3 GPL-3 OpenSSLException} homepage https://www.qt.io version 5.5.1 PortGroup qt5_variables 1.0 # get Qt's version numbers set branch [join [lrange [split ${version} .] 0 1] .] set qt_major [lindex [split ${version} .] 0] # Qt builds differently when it detects C++-11 compiler.cxx_standard 2011 master_sites \ https://download.qt.io/archive/qt/${branch}/${version}/submodules # see https://trac.macports.org/ticket/53952 dist_subdir qt5 # file sizes are significantly smaller using xz if { ${subport} ne ${name} && ${subport} ne "${name}-docs" } { use_xz yes } conflicts qt3 qt3-mac # conflict with all other version of qt5 foreach {qt_test_name qt_test_info} [array get available_qt_versions] { if {${name} ne ${qt_test_name}} { conflicts-append [lindex ${qt_test_info} 0] } } ############################################################################### Modules Not Considered # # No qtactiveqt (Windows Only) # No qtandroidextras (Android Only) # No qtwayland (Linux Only) # No qtx11extras (X11 Only) # No qtwinextras (Windows Only) # ############################################################################### ############################################################################### Finding Dependencies # # grep -r "%dependencies" * # find ./ -name sync.profile # # grep -r qtCompileTest * # # find ./ -name config.tests # # find ./ -name Find\*.cmake # # grep -r qtHaveModule * # # grep -r packagesExist * # # port provides `find ./ -name \*.dylib -exec otool -L {} \; | grep /opt/local/libexec/qt5 | cut -d ' ' -f1` | cut -d : -f2 | sort -u # port provides `find ./ -name \*.dylib -exec otool -L {} \; | grep /opt/local/lib/ | cut -d ' ' -f1` | cut -d : -f2 | sort -u # # https://code.qt.io/cgit/qt/qt5.git/tree/.gitmodules?h=5.5.1 # ############################################################################### ############################################################################### Notes # # qtconnectivity checks for bluetooth libraries # bluez and bluez_le (Linux Only) # # qtconnectivity depends on # qtandroidextras (Android Only) # # qtserialport depends on # ntddmodm (Windows Only) # # qttools depends on # qtactiveqt (Windows Only) # # qtwebkit has tests for libraries in: # Tools/qmake/mkspecs/features/configure.prf # Tools/qmake/config.tests/ # ############################################################################### ############################################################################### TODO # # TODO: possible to trim dependencies of qtbase? # ############################################################################### ############################################################################### Module Format # # "Qt Module Name" { # { # checksum, rmd160 # checksum, sha256 # checksum, size # } # dependencies, build # dependencies, lib # dependencies, Qt module name # Qt components provided # included in "standard" installation of Qt (empty string is no, explanation string is yes) # variant overrides # revision number # license replacement # } # # module info found at https://doc.qt.io/archives/qt-5.5/qtmodules.html # ############################################################################### array set modules { qt3d { { 181929ce80c7e88e4230239c260242749771f8ad e380906e2bcbd825dab45043bf063dd88b793c0d5fb050ee915bf4e2b58b1bf7 18061948 } "" "port:assimp" "qtdeclarative qtimageformats" {"Qt 3D"} "technology preview modules" "variant overrides: " "revision 4" "License: " } qtbase { { ce4bccd0703aaf8d904fbecd1f334ef13d698a44 dfa4e8a4d7e4c6b69285e7e8833eeecd819987e1bdbe5baa6b6facd4420de916 46389212 } "" "port:zlib port:libpng path:include/turbojpeg.h:libjpeg-turbo path:bin/dbus-daemon:dbus path:lib/pkgconfig/glib-2.0.pc:glib2 path:lib/pkgconfig/icu-uc.pc:icu port:pcre path:lib/pkgconfig/harfbuzz.pc:harfbuzz" "" {"Qt Core" "Qt GUI" "Qt Network" "Qt SQL" "Qt Test" "Qt Widgets" "Qt Concurrent" "Qt D-Bus" "Qt OpenGL" "Qt Platform Headers" "Qt Print Support" "Qt XML"} "" "variant overrides: " "revision 21" "License: " } qtcanvas3d { { ed68d3c61b0c67818626595a7bba14a627f5120b 759b171030d7110751943643885c1484c7900fed7737424d202e36bdeba0b080 10409580 } "" "" "qtdeclarative" {"Qt Canvas 3D"} "" "variant overrides: " "revision 1" "License: " } qtconnectivity { { ff138deaf87850b047c1e472188a2455b2e0ff54 3637e6def8582fc0fb3684179b93650720ba2da1311a560d358296153f245023 2660592 } "" "" "qtbase qtdeclarative" {"Qt Bluetooth" "Qt NFC"} "" "variant overrides: " "revision 1" "License: " } qtenginio { { 5b23212c3da401b9c74f33a6486ba18166f129f6 a79936bd5b6a35aba28dd282291b28c8fa869b8d86652c62efe5e268d94defe2 523788 } "" "" "qtdeclarative" {"Enginio"} "" "variant overrides: " "revision 1" "License: " } qtdeclarative { { 1d8939c42f4b510443365479ffe8bc525e0faac6 5fd14eefb83fff36fb17681693a70868f6aaf6138603d799c16466a094b26791 18627840 } "port:python27" "" "qtbase qtsvg qtxmlpatterns" {"Qt QML" "Qt Quick" "Qt Quick Widgets"} "" "variant overrides: " "revision 1" "License: " } qtdoc { { 907fc8eefba4e2c836143474f9abd99c0b0bf79f 9f0daf55a1765f637b5d8096a195842281a49adc5a82e7ddc75e541c62e00f86 2669772 } "" "" "qtdeclarative qttools sqlite-plugin" {"Qt Reference Documentation"} "requires all documentation" "variant overrides: ~examples ~tests ~debug noarch ~docs" "revision 2" "License: " } qtgraphicaleffects { { 43f6a91f75863f8333fc6b70456f1b0d175b55e4 9bca0f8db3a4289eceebfa9504915440fe3fa6301d90b65705e4ece528c12d47 14329444 } "" "" "qtdeclarative" {"Qt Graphical Effects"} "" "variant overrides: " "revision 1" "License: " } qtimageformats { { 75000000ddfbb83b960b73c07d2083b85dcd81fa c97fee00c602f9f089fea480546d6e9d61a2b2297c2f163bfd9f8aba92b754a5 1892820 } "" "port:jasper port:libmng port:tiff port:webp" "qtbase" {"Qt Image Formats"} "" "variant overrides: " "revision 6" "License: " } qtlocation { { 3792eedc159db6bf15eef706ee218f3cc5759a51 1fe948cb87649f4450be921cf3cdefc311595a80ef6a7a7b7484901baa0d6316 3108096 } "" "" "qtbase qtdeclarative qtquickcontrols qtserialport" {"Qt Location" "Qt Positioning"} "" "variant overrides: " "revision 1" "License: " } qtmacextras { { e31be686e79c1cf4a70357921f0caad4cd496c79 025350fdcc936118539ee3703115549b4547def329d3d959b9db5bd853ec9058 46312 } "" "" "qtbase" {"Qt Mac Extras"} "" "variant overrides: " "revision 1" "License: " } qtmultimedia { { 68049da5e203e484de766c17d683a34a888e0603 7cc7ca99f41587c188303670499e5c75101f9a8cb6178e8f29cc941e637d957f 3464340 } "" "" "qtbase qtdeclarative" {"Qt Multimedia" "Qt Multimedia Widgets"} "" "variant overrides: " "revision 1" "License: " } qtquick1 { { dd1c71468426a5b9fe4f5297a6f2b04c9caddc78 c812a7e59a8b9f0a87693181059933e15fef04bc875b6486cd653be1b9b51f2c 16028732 } "" "" "qtbase qtscript qtxmlpatterns qtdeclarative qttools qtwebkit" {"Qt Declarative"} "deprecated" "variant overrides: ~docs" "revision 1" "License: " } qtquickcontrols { { 3975fbb34a74d55f88f47b436b6fca6ce3f7c078 1b7a8389d656066c629bd2cb520b39a7eb041d184b567dd1b9639b88d841fcf0 5976316 } "" "" "qtdeclarative qtgraphicaleffects" {"Qt Quick Controls" "Qt Quick Dialogs" "Qt Quick Layouts" "Qt Quick Extras"} "" "variant overrides: " "revision 1" "License: " } qtscript { { 7d8ff8c4462b21b83212dd780030a01bd00b8ca9 cd46dddd998f22bcb06447e0407fef81f7052f25bc770b1c27625654cee828fd 2604884 } "" "" "qtbase" {"Qt Script" "Qt Script Tools"} "deprecated in favor QJS* in Qt QML" "variant overrides: " "revision 3" "License: " } qtsensors { { 9a3eaad761efaefc0a56258c0bd64e01d0889cba 5d264fc0729a5d7679bd4eb8d7a0a9b142ed38d09fa68fc7dfe57f64afc8eeea 1989556 } "" "" "qtbase qtdeclarative" {"Qt Sensors"} "" "variant overrides: " "revision 1" "License: " } qtserialport { { 00c53b307fd6ad509aedc6ed0b3a464ac3d8e809 a034dbfb023db1b9b9de54390f7e76a48c1d1eb12533b0ffd574505c99968f7a 260984 } "" "" "qtbase" {"Qt Serial Port"} "" "variant overrides: " "revision 1" "License: " } qtsvg { { db1dd37355a1e4b40a37decc1df60d574ab14088 f7f588be48befd9ccab5a6086832551b8899e8bed9e603ddea979581e05a91c7 1802880 } "" "" "qtbase" {"Qt SVG"} "" "variant overrides: " "revision 1" "License: " } qttools { { 279aacc94f7fa583a59d3fe005ecb3e598e92b32 4361f6ce49717058160908297841a18b94645cec593d1b48fb126c9d06c87bfd 9327100 } "" "" "qtbase qtdeclarative" {"Qt Designer" "Qt Help" "Qt UI Tools"} "" "variant overrides: " "revision 2" "License: " } qttranslations { { f9c956935768cea5c935a10493963f7e411dc255 41f800710f0bc6ca263f1e54f1fa22be7043962999304e73ce9887ebefc7a4c6 1153132 } "port:qt55-qttools" "" "" {"translation files"} "" "variant overrides: ~examples ~tests ~debug noarch ~docs" "revision 3" "License: " } qtwebchannel { { fca861f785f9d718aa17853bf7a3c072efcd53b7 7f4295ee57cd4ecba3cb263452d2a08d501b45c9a2b8b7794b6a97d7652f15d0 96684 } "" "" "qtbase qtdeclarative qtwebsockets" {"Qt WebChannel"} "" "variant overrides: " "revision 1" "License: " } qtwebengine { { 0c24bb89cc72a18c06e2fd613db1eb879ada2a2a 7c4d328dd305991aaf0c3450615f4a8e5d80152194bee6f5925bd8d3477e2b90 122819856 } "port:python27 port:py27-ply" "" "qtquickcontrols qtwebchannel qtlocation" {"Qt WebEngine" "Qt WebEngine Widgets"} "very large and relatively new; requires newer version of OS X" "variant overrides: " "revision 1" "License: " } qtwebkit { { 0594ec1150f7899d72f57d8ff2f108f3f75faaf9 77583f9dbd3e6ad874386df71b165dc3ce88efdabbc6e5d97a959ee2187d6d69 33489924 } "port:python27 port:bison" "port:fontconfig path:lib/pkgconfig/icu-uc.pc:icu port:leveldb port:webp port:libxml2 port:libxslt port:zlib port:sqlite3" "qtbase qtdeclarative qtlocation qtmultimedia qtsensors qtwebchannel qtxmlpatterns" {"Qt WebKit" "Qt WebKit Widgets"} "community support only (use Qt WebEngine)" "variant overrides: " "revision 11" "License: " } qtwebkit-examples { { 6d2a3aee163e419fbc6ec56a941c4354e8e93b7d 098935b42d6d249027d1a635e4e70edc3d2969dd860f825b36aec06fc72e46c6 3428204 } "" "" "qtbase qtwebkit qtscript qtsvg qtxmlpatterns qtdeclarative qttools" {"examples for Qt WebKit"} "deprecated in favor of Qt WebEngine; doen't provide functionality" "variant overrides: ++examples ~docs" "revision 1" "License: " } qtwebsockets { { 83dcc5d07dca6c1cccfaed13cd16fde940ad0b94 cf4e834a867b90337188be504ef20184c52666370f721e704952988f8cb12deb 170440 } "" "" "qtbase qtdeclarative" {"Qt WebSockets"} "" "variant overrides: " "revision 1" "License: " } qtxmlpatterns { { 403a3b2377728629b6a3f1073b24af3f3360adf7 b537eb0252988e3805a32a16c65038973371d647baf246fdf703bde725d0e8ec 1323560 } "" "" "qtbase" {"Qt XML Patterns"} "" "variant overrides: " "revision 1" "License: " } } ############################################################################### SQL Plugin Format # # { # variant name # dependency, library # include path # link requirement # obsolete? (empty string is no) # } # ############################################################################### array set sql_plugins { {sqlite SQLite "revision 1"} { { "sqlite3" "port:sqlite3" "${prefix}/include" "-L${prefix}/lib -lsqlite3" "" } } {psql PostgreSQL "revision 1"} { { "postgresql96" "port:postgresql96" "${prefix}/include/postgresql96" "-L${prefix}/lib/postgresql96 -lpq" "" } { "postgresql95" "port:postgresql95" "${prefix}/include/postgresql95" "-L${prefix}/lib/postgresql95 -lpq" "" } { "postgresql94" "port:postgresql94" "${prefix}/include/postgresql94" "-L${prefix}/lib/postgresql94 -lpq" "" } { "postgresql84" "port:postgresql84" "${prefix}/include/postgresql84" "-L${prefix}/lib/postgresql84 -lpq" "" } } {mysql MySQL "revision 1"} { { "mariadb55" "port:mariadb" "${prefix}/include/mariadb/mysql" "-L${prefix}/lib/mariadb/mysql -lmysqlclient_r" "" } { "mysql57" "port:mysql57" "${prefix}/include/mysql57/mysql" "-L${prefix}/lib/mysql57/mysql -lmysqlclient_r" "" } { "mysql56" "port:mysql56" "${prefix}/include/mysql56/mysql" "-L${prefix}/lib/mysql56/mysql -lmysqlclient_r" "" } } } # because CPATH is set, pkgconfig does not include ${prefix}/lib and ${prefix}/include even when requested # this means that files in ${prefix}/lib and ${prefix}/include are the *last* to be found # this causes problems when there are files in ${worksrpath} that are unintentionally found instead configure.env-append \ PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 \ PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 build.env-append \ PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 \ PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 # Qt uses CFRunLoopTimerCreateWithHandler, which was not introduced until Mac OS X 10.7 # see https://developer.apple.com/reference/corefoundation/1542555-cfrunlooptimercreatewithhandler?language=objc if { ${os.platform} eq "darwin" && ${os.major} < 11 } { known_fail yes pre-fetch { ui_error "${subport} requires OS X 10.7 or later" return -code error "incompatible OS version" } } foreach {module module_info} [array get modules] { set revision_string [string trim [lindex ${module_info} 7]] set revision_string [string range ${revision_string} 1+[string last " " ${revision_string}] end] subport ${name}-${module} { distname ${module}-opensource-src-${version} revision ${revision_string} # see https://bugreports.qt.io/browse/QTBUG-35514 build.target checksums \ rmd160 [lindex [lindex ${module_info} 0] 0] \ sha256 [lindex [lindex ${module_info} 0] 1] \ size [lindex [lindex ${module_info} 0] 2] set license_string [lindex ${module_info} 8] set license_string [string range ${license_string} 1+[string first ":" ${license_string}] end] set license_string [string trim ${license_string}] if { ${license_string} ne "" } { license {*}${license_string} } foreach deps [lindex ${module_info} 1] { depends_build-append [subst ${deps}] } foreach deps [lindex ${module_info} 2] { depends_lib-append [subst ${deps}] } foreach qtdeps [lindex ${module_info} 3] { if { ${qtdeps} ne "qtbase" } { depends_lib-append port:${name}-${qtdeps} } } description Tools and Module(s) for Qt Tool Kit ${qt_major} set modules_provided_list [lindex ${module_info} 4] if { [llength ${modules_provided_list}] == 1 } { set modules_provided_join [lindex ${modules_provided_list} 0] } elseif { [llength ${modules_provided_list}] == 2 } { set modules_provided_join [join ${modules_provided_list} " and "] } else { set modules_provided_join [join [list [join [lrange ${modules_provided_list} 0 end-1] ", "] [lindex ${modules_provided_list} end]] ", and "] } long_description "Tools and Module(s) for Qt Tool Kit ${qt_major}: ${modules_provided_join}" if { ${module} eq "qtbase" } { # this subport uses configure script (NOT qmake) PortGroup qt5 1.0 if { ${os.platform} ne "darwin" } { pre-fetch { ui_warn "${subport} is untested on \"${os.platform}\"." } } if {${universal_possible} && [variant_isset universal]} { pre-fetch { ui_warn "Multiple architectures is not a Reference Configuration for Qt." ui_warn "See https://doc.qt.io/qt-5/supported-platforms.html#reference-configurations" } } else { if { ${configure.build_arch} eq "i386" } { pre-fetch { ui_warn "32-bit mode is not a Reference Configuration for Qt." ui_warn "See https://doc.qt.io/qt-5/supported-platforms.html#reference-configurations" } } } # Qt uses TLS protocols introduced in OS X 10.8 # see https://developer.apple.com/reference/security/sslprotocol/ktlsprotocol11 # see https://developer.apple.com/reference/security/sslprotocol?language=objc pre-fetch { if { ${os.platform} eq "darwin" && ${os.major} < 12 && ![variant_isset openssl] } { ui_error "using Secure Transport requires OS X 10.8 or later" ui_error "please use openssl variant" return -code error "incompatible variant choice" } } # https://codereview.qt-project.org/#/c/141654/ patchfiles-append patch-add_sdk.diff # the build system uses pkgconfig to look for an OpenGL installation (gl.pc) # the build system automatically uses OpenGL frameworks (-framework OpenGL -framework AGL) # if mesa is installed, the build system will try to use both OpenGL systems # when building qtmultimedia, this will cause problems # Undefined symbols: "_CGLGetCurrentContext" patchfiles-append patch-opengl.diff # see https://codereview.qt-project.org/#/c/126584/ patchfiles-append patch-pcfiles.diff # https://codereview.qt-project.org/#/c/140876/ patchfiles-append patch-stdloc.diff #https://codereview.qt-project.org/#/c/138349 patchfiles-append patch-rpath.diff # as of 5.6.1, avoid "... is lacking an install target" # see https://codereview.qt-project.org/#/c/156610/1 patchfiles-append patch-install_examples.diff # see https://stackoverflow.com/questions/14506151/invalid-symbol-redefinition-in-inline-asm-on-llvm # only runs test code on 32-bit systems patchfiles-append patch-tst_benchlibcallgrind.diff # this test might still cause problems, but with 5.4.2->5.5.0, it is no longer run # tests/auto/corelib/plugin/qpluginloader/qpluginloader.pro: # -macx-*: SUBDIRS += machtest # +macx-*: contains(QT_CONFIG, private_tests): SUBDIRS += machtest # # When testing, ensure that a universal object file is not inadvertently created. patchfiles-append patch-machtest.diff # see https://trac.macports.org/ticket/52200 # see https://codereview.qt-project.org/#/c/164673/ patchfiles-append patch-xcrun.diff # see https://bugreports.qt.io/browse/QTBUG-62266 patchfiles-append patch-sdk10_13.diff # avoid non-standard C++ that Xcode Clang accepts but other compilers do not # see https://lists.llvm.org/pipermail/llvm-bugs/2017-January/053481.html # see https://gcc.gnu.org/bugzilla/show_bug.cgi?id=11764 patchfiles-append patch-qualified_reference.diff # find the Rez program patchfiles-append patch-find_rez.diff post-patch { reinplace \ "s|__MACPORTS_Rez__|[exec -ignorestderr xcrun --find Rez]|g" \ mkspecs/common/mac.conf \ mkspecs/features/mac/rez.prf } # Qt assumes Clang's x86intrin.h does not provide _bit_scan_reverse # this assumption is incorrect for Clang 9.0 and later # (which Xcode 11.4 and later are also based on) # see https://github.com/llvm/llvm-project/commit/88f4054f48c5 # see https://trac.macports.org/ticket/59364 https://trac.macports.org/ticket/62051 patchfiles-append patch-qtbase-intel_intrinsics.diff # ICU now requires C++11 # see https://trac.macports.org/ticket/59434 patchfiles-append patch-qtbase-icu_test.diff #----------------------------------------------------------------------------- # qtbase is used for: # 1) building qtbase # 2) building MacPorts projects via qmake # 3) building end-user projects # # 1 & 2 require consistency with the MacPorts environment # 3 requires consistency with the default Qt installation # # 2 can be achieved via environment variables # (e.g. QMAKE_MACOSX_DEPLOYMENT_TARGET=${macosx_deployment_target}) # # the only way 3 can be achieved is if no changes are made to the build system # # the following is an attempt to achieve 1 without destroying 3 #----------------------------------------------------------------------------- # save default spec files post-extract { copy ${worksrcpath}/mkspecs ${worksrcpath}/mkspecs-save } # respect MacPorts build variables patchfiles-append patch-mkspecs.diff # respect configure.compiler if { ${configure.compiler} eq "clang" } { # let xargs find correct compiler (default behaviour) post-patch { # let xargs find correct compiler reinplace \ "s|__MACPORTS_CC__|clang|g" \ ${worksrcpath}/mkspecs/common/clang.conf reinplace \ "s|__MACPORTS_CXX__|clang++|g" \ ${worksrcpath}/mkspecs/common/clang.conf } } else { post-patch { reinplace \ "s|__MACPORTS_CC__|${configure.cc}|g" \ ${worksrcpath}/mkspecs/common/clang.conf reinplace \ "s|__MACPORTS_CXX__|${configure.cxx}|g" \ ${worksrcpath}/mkspecs/common/clang.conf } } if { [string match macports-clang-* ${configure.compiler}] && [vercmp ${xcodeversion} "7.0"] >= 0 } { # non-Xcode clang does not seem to be able to understand tbd files # for an explanation of tbd files, see # https://stackoverflow.com/questions/31450690/why-xcode-7-shows-tbd-instead-of-dylib # see https://trac.macports.org/ticket/53151 pre-fetch { ui_error "This configuration is known to fail" ui_error "See https://trac.macports.org/ticket/53151" ui_error "As a workaround, do not set configure.compiler manually" return -code error "incompatible configuration" } } post-patch { if {${configure.cxx_stdlib} eq "macports-libstdc++" && ${os.platform} eq "darwin" && ${os.major} < 13} { set cxx_abi " -D_GLIBCXX_USE_CXX11_ABI=0" } else { set cxx_abi "" } # respect configure.cxx_stdlib reinplace \ "s|__MACPORTS_CXX_STDLIB__|${configure.cxx_stdlib}${cxx_abi}|g" \ ${worksrcpath}/mkspecs/common/clang-mac.conf # respect macosx_deployment_target foreach spec {macx-clang macx-clang-32 macx-g++ macx-g++-32 macx-g++40 macx-g++42 macx-icc macx-llvm} { reinplace \ "s|__MACPORTS_DEPLOYMENT_TARGET__|${macosx_deployment_target}|g" \ ${worksrcpath}/mkspecs/${spec}/qmake.conf } #respect configure.optflags reinplace \ "s|__MACPORTS_OPTFLAGS__|${configure.optflags}|g" \ ${worksrcpath}/mkspecs/common/gcc-base.conf } # respect configure.sdk_version post-patch { reinplace \ "s|__MACPORTS_MAC_SDK__|${qt5.mac_sdk}|g" \ ${worksrcpath}/mkspecs/common/macx.conf } # return modified spec files to the default values post-build { if { [variant_exists universal] && [variant_isset universal] } { foreach arch ${universal_archs_to_use} { foreach conf {clang.conf macx.conf clang-mac.conf gcc-base.conf} { move -force ${worksrcpath}-${arch}/mkspecs-save/common/${conf} ${worksrcpath}-${arch}/mkspecs/common/${conf} } foreach spec {macx-clang macx-clang-32 macx-g++ macx-g++-32 macx-g++40 macx-g++42 macx-icc macx-llvm} { move -force ${worksrcpath}-${arch}/mkspecs-save/${spec}/qmake.conf ${worksrcpath}-${arch}/mkspecs/${spec}/qmake.conf } } } else { foreach conf {clang.conf macx.conf clang-mac.conf gcc-base.conf} { move -force ${worksrcpath}/mkspecs-save/common/${conf} ${worksrcpath}/mkspecs/common/${conf} } foreach spec {macx-clang macx-clang-32 macx-g++ macx-g++-32 macx-g++40 macx-g++42 macx-icc macx-llvm} { move -force ${worksrcpath}/mkspecs-save/${spec}/qmake.conf ${worksrcpath}/mkspecs/${spec}/qmake.conf } } } # --prefix is not recognized. configure.pre_args-delete --prefix=${prefix} # --disable-dependency-tracking is not recognized. configure.universal_args-delete --disable-dependency-tracking # Installation options: #-extprefix SYSROOT/PREFIX #-hostprefix EXTPREFIX #-libexecdir ARCHDATADIR/libexec #-hostbindir HOSTPREFIX/bin #-hostlibdir HOSTPREFIX/lib configure.args-append \ -prefix ${qt_dir} \ -bindir ${qt_bins_dir} \ -headerdir ${qt_includes_dir} \ -libdir ${qt_libs_dir} \ -archdatadir ${qt_archdata_dir} \ -plugindir ${qt_plugins_dir} \ -importdir ${qt_imports_dir} \ -qmldir ${qt_qml_dir} \ -datadir ${qt_data_dir} \ -docdir ${qt_docs_dir} \ -translationdir ${qt_translations_dir} \ -sysconfdir ${qt_sysconf_dir} \ -examplesdir ${qt_examples_dir} \ -testsdir ${qt_tests_dir} \ -hostdatadir ${qt_host_data_dir} # Configure options: configure.args-append \ -release \ -opensource \ -confirm-license \ -shared \ -largefile \ -accessibility foreach driver { db2 ibase mysql oci odbc psql sqlite sqlite2 tds } { configure.args-append -no-sql-${driver} } if {!${universal_possible} || ![variant_isset universal]} { configure.args-append "-platform ${qt_qmake_spec}" } else { set merger_configure_args(i386) "-platform ${qt_qmake_spec_32}" set merger_configure_args(x86_64) "-platform ${qt_qmake_spec_64}" } configure.args-append \ -no-testcocoon \ -no-gcov \ -force-pkg-config # turn off CFG_CLOEXEC if gnulib is installed # Third Party Libraries: configure.args-append \ -system-zlib \ -no-mtdev \ -no-journald \ -system-libpng \ -system-libjpeg \ -no-freetype \ -system-harfbuzz \ -no-openssl \ -no-libproxy \ -system-pcre \ --disable-xcb \ -no-xkbcommon-x11 \ -no-xkbcommon-evdev \ -no-xinput2 \ -no-xcb-xlib \ -glib \ -no-pulseaudio \ -no-alsa \ -no-gtkstyle # from the configure script: # NOTE: -optimized-tools is not useful in -release mode. # http://lists.qt-project.org/pipermail/development/2017-January/028392.html # Prefer ICU over iconv # Additional options: configure.args-append \ {-make libs} \ {-make tools} \ {-nomake examples} \ {-nomake tests} \ -gui \ -widgets \ -no-rpath \ -verbose \ -nis \ -cups \ -no-iconv \ -no-evdev \ -no-tslib \ -icu \ -no-fontconfig \ -strip \ -no-pch \ -dbus-linked \ -no-use-gold-linker \ -no-separate-debug-info \ -no-xcb \ -no-eglfs \ -no-directfb \ -no-linuxfb \ -no-kms \ -no-libinput \ -no-gstreamer \ -no-system-proxies # MacOS/iOS options: configure.args-append \ -framework \ -securetransport # do not use ${configure.sdk_version} # SDK is recorded in ${qt_mkspecs_dir}/qdevice.pri # SDK may then be removed if Xcode is updated # see https://trac.macports.org/ticket/54044 # see https://trac.macports.org/ticket/55195 configure.args-append \ -sdk macosx # configure options that don't show up in configure --help configure.args-append \ -no-libudev \ -no-egl \ -no-openvg # Qt builds part of the system using environment provided by MacPorts. # It builds the rest using its own internal environment. # For consistency, clear MacPorts environment. #configure.cxx_stdlib proc portconfigure::should_add_stdlib {} {return no} proc portconfigure::should_add_cxx_abi {} {return no} compiler.limit_flags yes configure.cc_archflags configure.cxx_archflags configure.objc_archflags configure.objcxx_archflags configure.ld_archflags configure.cppflags configure.cflags configure.cxxflags configure.objcflags configure.objcxxflags configure.ldflags configure.pipe no if {${universal_possible} && [variant_isset universal]} { set merger_arch_flag no } configure.march configure.mtune configure.universal_ldflags configure.universal_cflags configure.universal_cxxflags configure.universal_cppflags # configure script looks for perl but doesn't seem to use it for our configuration # configure script uses gawk if it can find it, # so require it for consistency depends_build-append port:gawk # unless overridden, configure script uses gmake if it can find it configure.env-append MAKE=${build.cmd} if {${universal_possible} && [variant_isset universal]} { post-destroot { # delete preprocessor comments surrounding QT_CPU_FEATURES.i386 and QT_CPU_FEATURES.x86_64 reinplace "/^#ifndef.*$/d" ${destroot}${qt_mkspecs_dir}/qmodule.pri reinplace "/^#else.*$/d" ${destroot}${qt_mkspecs_dir}/qmodule.pri reinplace "/^#endif.*$/d" ${destroot}${qt_mkspecs_dir}/qmodule.pri } # The file ${qt_mkspecs_dir}/qconfig.pri is still not properly merged # A workaround is to set QT_ARCH and QT_TARGET_ARCH manually (see e.g. the qmake5 PortGroup) } variant tests description {Enable tests} { configure.args-replace {-nomake tests} {-make tests} } variant examples description {Build examples} { configure.args-replace {-nomake examples} {-make examples} } variant debug description {Build both release and debug libraries} { configure.args-replace -release -debug-and-release } variant pulseaudio description {Compile PulseAudio support} { depends_lib-append port:pulseaudio configure.args-replace -no-pulseaudio -pulseaudio } variant gstreamer description {Compile GStreamer support} { depends_lib-append port:gstreamer1 port:gstreamer1-gst-plugins-base configure.args-replace -no-gstreamer {-gstreamer 1.0} } variant openssl description {Use OpenSSL instead of Secure Transport} { configure.args-delete -securetransport -no-openssl configure.args-append -openssl-linked # see https://trac.macports.org/ticket/58204 depends_lib-append port:openssl10 # Please do not use -I and -L. # -I becomes -isystem in the Qt build system, which is checked *after* CPATH. compiler.cpath-prepend ${prefix}/include/openssl-1.0 compiler.library_path-prepend \ ${prefix}/lib/openssl-1.0 } default_variants-append +openssl } else { # these subports use qmake PortGroup qmake5 1.0 # determine which variants are to be turned off set request_examples true set request_tests true set def_var "" if { [lsearch -exact [lindex ${module_info} 6] "~universal"] != -1 } { universal_variant no } if { [lsearch -exact [lindex ${module_info} 6] "noarch"] != -1 } { supported_archs noarch platforms any } if { [lsearch -exact [lindex ${module_info} 6] "~debug"] != -1 } { qt5.debug_variant no } if { [lsearch -exact [lindex ${module_info} 6] "~examples"] != -1 } { set request_examples false } if { [lsearch -exact [lindex ${module_info} 6] "~tests"] != -1 } { set request_tests false } if { [lsearch -exact [lindex ${module_info} 6] "++examples"] != -1 } { set request_examples true lappend def_var "+examples" } if { ${request_examples} } { variant examples description {Build examples} {} } if { ${request_tests} } { variant tests description {Enable tests} {} } if { ${def_var} ne "" } { default_variants-append ${def_var} } # accommodating variant request varies depending on how qtbase was built pre-configure { # determine if qmake builds examples by default (set via variants) if {[active_variants ${name}-qtbase examples ""]} { set base_examples true } else { set base_examples false } # determine if qmake runs tests by default (set via variants) if {[active_variants ${name}-qtbase tests ""]} { set base_tests true } else { set base_tests false } # determine if the user wants to build examples if { [variant_exists examples] && [variant_isset examples] } { set this_examples true } else { set this_examples false } # determine if the user wants to run tests if { [variant_exists tests] && [variant_isset tests] } { set this_tests true } else { set this_tests false } # determine if qmake's default and user requests are compatible; override qmake if necessary if { ${this_examples} && !${base_examples} } { configure.args-append "QT_BUILD_PARTS+=\"examples\"" } if { !${this_examples} && ${base_examples} } { configure.args-append "QT_BUILD_PARTS-=\"examples\"" } if { ${this_tests} && !${base_tests} } { configure.args-append "QT_BUILD_PARTS+=\"tests\"" } if { !${this_tests} && ${base_tests} } { configure.args-append "QT_BUILD_PARTS-=\"tests\"" } } ############################################################################### # Special Cases ############################################################################### # special case if { ${module} eq "qt3d" } { # https://trac.macports.org/ticket/65530 qt5.cxxflags-append -std=c++11 } # special case if { ${module} eq "qtdoc" } { build.target docs destroot.target install_docs # in the process of building the html files, qtdoc looks for all installed modules # with no clear way to select only a subset # unless a way is found, ReproducibleBuilds (https://trac.macports.org/wiki/ReproducibleBuilds) # requires qtdoc depend on all the documentation modules foreach {module_doc module_doc_info} [array get modules] { if { [lsearch -exact [lindex ${module_doc_info} 6] "~docs"] == -1 } { if { ${os.platform} eq "darwin" && ${os.major} >= 12 || (${module_doc} ne "qtwebengine") } { depends_lib-append port:${name}-${module_doc}-docs } } } } # special case if { ${module} eq "qtlocation" } { # qtlocation uses # Gypsy (https://gypsy.freedesktop.org/wiki/) # if they can be found # Ensure that test fails even if software is installed post-patch { foreach test { gypsy } { reinplace "s|return 0;|return 0;\\\n#error turn off test|g" ${worksrcpath}/config.tests/${test}/main.cpp } } } # special case if { ${module} eq "qtwebkit" } { platform darwin 11 { known_fail yes pre-fetch { ui_error "${subport} currently does not build on OS X 10.7, see https://trac.macports.org/ticket/64172" return -code error "incompatible OS version" } } # use MacPorts icu # # qmake uses pkgconfig to look for icu # this feature does not work without "CONFIG += link_pkgconfig" patchfiles-append patch-icu.diff #https://codereview.qt-project.org/#/c/139967/ #https://codereview.qt-project.org/#/c/139968/ #https://codereview.qt-project.org/#/c/139970/ patchfiles-append patch-ssl.diff # qtwebkit uses # glx # libXcomposite # libXrender # if they can be found # Ensure that test fails even if software is installed post-patch { foreach test { glx libXcomposite libXrender } { reinplace "s|return 0;|return 0;\\\n#error turn off test|g" ${worksrcpath}/Tools/qmake/config.tests/${test}/${test}.cpp } } # by default, qmake uses -mmacosx-version-min=10.6, which means __MAC_OS_X_VERSION_MIN_REQUIRED is set to 1006 # setting QMAKE_MACOSX_DEPLOYMENT_TARGET to ${macosx_deployment_target} changes __MAC_OS_X_VERSION_MIN_REQUIRED # and unwanted code is included # this patch allows qtwebkit to build, but other problems may crop up patchfiles-append patch-deployment_target.diff # see https://bugs.webkit.org/show_bug.cgi?id=171612 patchfiles-append patch-qtwebkit_fix_icu.diff # backport upstream WebKit changes to avoid # error: "Unsupported PAGE_SHIFT amount" # see https://trac.macports.org/ticket/62027#comment:49 patchfiles-append patch-qtwebkit_fix_page_shift.diff # work around https://trac.macports.org/ticket/60975 patchfiles-append patch-webkit_XPathGrammar.y.diff patchfiles-append patch-webkit_makegrammar.pl.diff } # special case if { ${module} eq "qttools" } { # prevent qttools from opportunistically using qtwebkit if it can be found patchfiles-append patch-no_qtwebkit.diff variant qtwebkit description {build with QtWebkit support} { patchfiles-delete patch-no_qtwebkit.diff depends_lib-append port:${name}-qtwebkit } post-extract { # these folders are installed and conflict with ${name}-qttools-docs delete ${worksrcpath}/examples/assistant/simpletextviewer/documentation delete ${worksrcpath}/examples/help/contextsensitivehelp/docs } # see #44934 (and #35067 for the qt4-mac version) set framework_list [split ${qt_frameworks_dir} '/'] set qt_list [split ${qt_dir} '/'] while {[llength ${qt_list}] && [llength ${framework_list}]} { set var_qt [lindex $qt_list 0] set var_framework [lindex $framework_list 0] if { ${var_qt} ne ${var_framework} } { break } # remove first element from list set qt_list [lreplace ${qt_list} 0 0] set framework_list [lreplace ${framework_list} 0 0] } set libreplace [string repeat ../ [llength ${qt_list}]][join ${framework_list} /] if { ${libreplace} ne "lib" } { patchfiles-append patch-shared.diff post-patch { reinplace "s|__MACPORTS_FRAMWORK_DIR__|${libreplace}|g" ${worksrcpath}/src/macdeployqt/shared/shared.cpp } } } # special case if { ${module} eq "qtwebengine" } { # see https://doc.qt.io/qt-5/qtwebengine-platform-notes.html PortGroup xcodeversion 1.0 minimum_xcodeversions {12 5.1} if { ${os.platform} eq "darwin" && ${os.major} < 12 } { known_fail yes pre-fetch { ui_error "${subport} requires OS X 10.8 or later" return -code error "incompatible OS version" } } # UsingTheRightCompiler (https://trac.macports.org/wiki/UsingTheRightCompiler) build.env-append CXX=${configure.cxx} build.env-append CC=${configure.cc} configure.args-append QMAKE_LINK=${configure.cxx} # see https://codereview.qt-project.org/#/c/125968/ patchfiles-append patch-qtwebengine32.diff if {[vercmp ${xcodeversion} "7.0"] >= 0} { # For SDKs 10.11 and later, the MIDI types are the same patchfiles-append patch-midifix.diff } # see https://codereview.qt-project.org/#/c/127759/ patchfiles-append patch-fix_sdk.diff # see https://code.qt.io/cgit/qt/qtwebengine-chromium.git/commit/chromium/printing/backend/print_backend_cups.cc?h=53-based&id=3bd01037ab73b3ffbf4abbf97c54443a91b2fc4d # see https://bugs.chromium.org/p/chromium/issues/detail?id=622493 patchfiles-append patch-cups.diff # see https://trac.macports.org/ticket/56829 patchfiles-append patch-qtwebengine_xcode10.diff } # special case if { ${module} eq "qtsensors" && [variant_isset examples] } { if { [variant_isset debug] } { set debug "_debug" } else { set debug "" } # fix library path names or MacPorts will try to reinstall post-destroot { foreach dylib "grue/Grue/libdeclarative_grue${debug}.dylib grue/libgruesensor.1.dylib grue/sensors/libqtsensors_grue${debug}.dylib sensor_explorer/Explorer/libdeclarative_explorer${debug}.dylib" { system "/usr/bin/install_name_tool -id ${qt_examples_dir}/sensors/${dylib} ${destroot}${qt_examples_dir}/sensors/${dylib}" } foreach dylib "grue/Grue/libdeclarative_grue${debug}.dylib grue/sensors/libqtsensors_grue${debug}.dylib" { system "/usr/bin/install_name_tool -change libgruesensor.1.dylib ${qt_examples_dir}/sensors/grue/libgruesensor.1.dylib ${destroot}${qt_examples_dir}/sensors/${dylib}" } } } # special case if { ${module} eq "qtconnectivity" } { if { ${os.platform} eq "darwin" && ${os.major} >= 19 } { known_fail yes pre-fetch { ui_error "${subport} currently does not build on macOS 10.15 or later, see https://trac.macports.org/ticket/65544" return -code error "incompatible OS version" } } patchfiles-append patch-qtconnectivity_qtbug_76847.diff # https://codereview.qt-project.org/#/c/172619/ patchfiles-append patch-qtconn-for-10.12.diff # see https://bugreports.qt.io/browse/QTBUG-62658 patchfiles-append patch-qtconnectivity-sdk10_13.diff # @property UUID was removed in SDK 10.13 # avoid osx/osxbtcentralmanager.mm:241:34: error: call to implicitly-deleted copy constructor of 'ObjCScopedPointer' # @property isConnected was removed in SDK 10.13 patchfiles-append patch-qtconnectivity-uuid.diff } # special case if { ${module} eq "qtwebkit-examples" && ![variant_isset examples] } { # create a dummy file so the port can be successfully activated post-destroot { xinstall -d -m 0755 ${destroot}${prefix}/share/doc/${subport} set docfile [open ${destroot}${prefix}/share/doc/${subport}/README.txt "w"] puts ${docfile} "Without the examples variant, no examples are installed" puts ${docfile} "${long_description}" close ${docfile} } } # special case if { ${module} eq "qtscript" } { # see https://trac.macports.org/ticket/54453 patchfiles-append patch-qtscript_ceil.diff # error: meaningless 'volatile' on asm outside function patchfiles-append patch-qtscript_no_asm_volatile.diff # See https://code.qt.io/cgit/qt/qt5.git/commit/?id=758d922716ebdedeaa6fa26369c8dbb9dff4bae4 if {[variant_isset examples]} { depends_lib-append port:${name}-qttools } # see https://trac.macports.org/ticket/59321 post-extract { move ${worksrcpath}/src/3rdparty/javascriptcore/VERSION ${worksrcpath}/src/3rdparty/javascriptcore/VERSION.txt } } # special case if { ${module} eq "qtmultimedia" } { # avoid # warning: instance method '-setWantsLayer:' not found (return type defaults to 'id') [-Wobjc-method-access] # warning: multiple methods named 'layer' found [-Wobjc-multiple-method-names] # error: cannot initialize a variable of type 'CALayer *' with an rvalue of type 'NSInteger' (aka 'long') patchfiles-append patch-qtmultimedia-avfvideowindowcontrol.mm.diff patchfiles-append patch-qtmultimedia-avfvideowidget.mm.diff } # special case if { ${module} eq "qtimageformats" } { # https://trac.macports.org/ticket/65821 patchfiles-append patch-qtimageformats-qjp2handler.cpp.diff } } } if { [lsearch -exact [lindex ${module_info} 6] "~docs"] == -1 } { subport ${name}-${module}-docs { supported_archs noarch installs_libs no platforms any distname ${module}-opensource-src-${version} revision ${revision_string} description Documentation for the port ${name}-${module} long_description ${description} build.target docs destroot.target install_docs checksums \ rmd160 [lindex [lindex ${module_info} 0] 0] \ sha256 [lindex [lindex ${module_info} 0] 1] \ size [lindex [lindex ${module_info} 0] 2] depends_build-append \ port:${name}-qttools \ port:${name}-sqlite-plugin # depend on the modules for which this subport provides documentation # also have the same build dependencies depends_build-append port:${name}-${module} foreach deps [lindex ${module_info} 1] { depends_build-append [subst ${deps}] } PortGroup qmake5 1.0 qt5.debug_variant no # special cases if { ${module} in [list "qttools" "qtbase"] } { post-extract { # generated makefiles assume full Qt was built locally xinstall -d -m 0755 ${worksrcpath}/bin/ foreach bin {qdoc qhelpgenerator} { ln -s ${qt_bins_dir}/${bin} ${worksrcpath}/bin/ } } } if { ${module} eq "qttools" } { post-extract { # generated makefiles assume full Qt was built locally xinstall -d -m 0755 ${worksrcpath}/lib/QtHelp.framework/Headers/QtHelp ln -s \ ${qt_libs_dir}/QtHelp.framework/Versions/5/Headers/QHelpEngineCore \ ${worksrcpath}/lib/QtHelp.framework/Headers/QtHelp ln -s \ ${qt_libs_dir}/QtHelp.framework/Versions/5/Headers/qhelpenginecore.h \ ${worksrcpath}/lib/QtHelp.framework/Headers ln -s \ ${qt_libs_dir}/QtHelp.framework/Versions/5/Headers/qhelp_global.h \ ${worksrcpath}/lib/QtHelp.framework/Headers/QtHelp } } elseif { ${module} eq "qtwebengine" } { # UsingTheRightCompiler (https://trac.macports.org/wiki/UsingTheRightCompiler) build.env-append CXX=${configure.cxx} } elseif { ${module} eq "qtwebkit" } { post-extract { # without this file, the makefile ${worksrcpath}/qtwebkit/Source/WebCore/Makefile.WebCore.Target # keeps generating itself over and over again # this file is only created when the library is being built, however xinstall -d -m 0755 ${worksrcpath}/Source/WebCore/generated touch ${worksrcpath}/Source/WebCore/generated/InspectorBackendCommands.qrc } } elseif { ${module} eq "qtbase" } { # see https://trac.macports.org/ticket/52200 # see https://codereview.qt-project.org/#/c/164673/ patchfiles-append patch-xcrun.diff } } } } # see https://doc.qt.io/qt-5/sql-driver.html for info on building SQL Database Drivers foreach {sql_names sql_info} [array get sql_plugins] { set driver [lindex ${sql_names} 0] set dbms [lindex ${sql_names} 1] set revision_string [lindex ${sql_names} 2] set revision_string [string range ${revision_string} 1+[string last " " ${revision_string}] end] subport ${name}-${driver}-plugin { PortGroup qmake5 1.0 distname qtbase-opensource-src-${version} revision ${revision_string} checksums \ rmd160 [lindex [lindex $modules(qtbase) 0] 0] \ sha256 [lindex [lindex $modules(qtbase) 0] 1] \ size [lindex [lindex $modules(qtbase) 0] 2] description ${dbms} Database Driver for Qt Tool Kit ${qt_major} long_description ${dbms} Database Driver for Qt Tool Kit ${qt_major} # if there is more than one version of the database system, create variants for each version if { [llength ${sql_info}] > 1 } { set any_variant_set false foreach variant_info ${sql_info} { set varName [lindex ${variant_info} 0] # find every other variant so it can be marked as conflicting set conflicts_list "" foreach variant_info2 ${sql_info} { set varName2 [lindex ${variant_info2} 0] if { ${varName} ne ${varName2} } { lappend conflicts_list ${varName2} } } # get only the numbers from the name regexp {[0-9].} ${varName} varVer variant ${varName} conflicts ${conflicts_list} description "use version ${varVer} of ${dbms}" {} # check if any variant has been set if { [variant_isset ${varName}] } { set any_variant_set true } } # ensure at least one variant is set if { !${any_variant_set} } { default_variants-append +[lindex [lindex ${sql_info} 0] 0] } } foreach variant_info ${sql_info} { set varName [lindex ${variant_info} 0] if { ( [variant_exists ${varName}] && [variant_isset ${varName}] ) || [llength ${sql_info}]==1 } { depends_lib-append [lindex ${variant_info} 1] configure.args-append \ [subst INCLUDEPATH+=\"[lindex ${variant_info} 2]\"] \ [subst LIBS+=\"[lindex ${variant_info} 3]\"] } } # for single architecture, easier to use # worksrcdir ${worksrcdir}/qtbase/src/plugins/sqldrivers/${driver}, # but doesn't work for universal build configure.dir ${worksrcpath}/src/plugins/sqldrivers/${driver} build.dir ${configure.dir} destroot.dir ${configure.dir} # see https://trac.macports.org/ticket/53248 qt5.top_level ${worksrcpath} # see https://trac.macports.org/ticket/52200 # see https://codereview.qt-project.org/#/c/164673/ patchfiles-append patch-xcrun.diff } } subport ${name}-docs { # meta-port to install documentation for various modules revision 0 description Documentation for Qt Tool Kit ${qt_major} long_description Documentation for Qt Tool Kit ${qt_major} master_sites distfiles use_configure no supported_archs noarch installs_libs no platforms any build {} # create a dummy file so the port can be successfully activated destroot { xinstall -d -m 0755 ${destroot}${prefix}/share/doc/${subport} set docfile [open ${destroot}${prefix}/share/doc/${subport}/README.txt "w"] puts ${docfile} "Meta-port for ${name}" puts ${docfile} "${long_description}" close ${docfile} } foreach {module module_info} [array get modules] { if { [lindex ${module_info} 5] eq "" } { if { [lsearch -exact [lindex ${module_info} 6] "~docs"] == -1 } { depends_run-append port:${name}-${module}-docs } } } } if { ${subport} eq ${name} } { # the main port is Meta-port to install various modules revision 0 description Qt Tool Kit ${qt_major} long_description Qt Tool Kit: A cross-platform framework \ (headers, data, and libraries) for writing \ cross-platform GUI-based applications. master_sites distfiles use_configure no supported_archs noarch installs_libs no platforms any build {} # create a dummy file so the port can be successfully activated destroot { xinstall -d -m 0755 ${destroot}${prefix}/share/doc/${subport} set docfile [open ${destroot}${prefix}/share/doc/${subport}/README.txt "w"] puts ${docfile} "Meta-port for ${name}" puts ${docfile} "${long_description}" close ${docfile} } foreach {module module_info} [array get modules] { if { [lindex ${module_info} 5] eq "" } { depends_run-append port:${name}-${module} } } depends_run-append port:${name}-sqlite-plugin } set python_framework "" set depends_check "" if { [info exists depends_build] } { set depends_check "${depends_check} ${depends_build}" } if { [info exists depends_lib] } { set depends_check "${depends_check} ${depends_lib}" } foreach deps ${depends_check} { if { [string first ":python27" ${deps}] >= 0 } { # If Qt components use Python, ensure that MacPorts python27 is used # # a better solution would be to force components to use a specific python program # how to accomplish such a thing is not entirely clear # # see #49838 # # version 5.5.1 (at least) of qtwebengine must find a python version in the interval [2.7, 3) # (see tools/qmake/mkspecs/features/functions.prf) # versions 5.5.1 of qtdeclarative and qtwebkit also use python with no way of specifying which one # set python_framework ${frameworks_dir}/Python.framework/Versions/2.7 } } if { ${python_framework} ne "" } { configure.env-append PATH=${python_framework}/bin:$env(PATH) build.env-append PATH=${python_framework}/bin:$env(PATH) } unset python_framework if { ![exists universal_variant] || [option universal_variant] } { PortGroup muniversal 1.0 } if {${universal_possible} && [variant_isset universal]} { merger-post-destroot { foreach arch ${universal_archs_to_use} { set dir ${destroot}-${arch} foreach prlfl [glob -nocomplain ${dir}${qt_libs_dir}/*.framework/*.prl] { reinplace -q "s|${worksrcpath}-${arch}|${worksrcpath}|g" ${prlfl} } foreach prlfl [glob -nocomplain ${dir}${qt_libs_dir}/*.prl] { reinplace -q "s|${worksrcpath}-${arch}|${worksrcpath}|g" ${prlfl} } foreach prlfl [glob -nocomplain ${dir}${qt_examples_dir}/widgets/tools/plugandpaint/plugins/*.prl] { reinplace -q "s|${worksrcpath}-${arch}|${worksrcpath}|g" ${prlfl} } if { [file exists ${dir}${qt_libs_dir}/cmake/Qt5Core/Qt5CoreConfigExtrasMkspecDir.cmake] } { reinplace "s|macx-clang-32|macx-clang|g" ${dir}${qt_libs_dir}/cmake/Qt5Core/Qt5CoreConfigExtrasMkspecDir.cmake } # Libs.private contains the value of ${worksrcpath}-${arch}, which prevents merging if { [file exists ${dir}${qt_libs_dir}/pkgconfig/Qt5WebKit.pc] } { reinplace "s|${worksrcpath}-${arch}|${worksrcpath}|g" ${dir}${qt_libs_dir}/pkgconfig/Qt5WebKit.pc } if { [file exists ${dir}${qt_libs_dir}/pkgconfig/Qt5WebEngineCore.pc] } { reinplace "s|${worksrcpath}-${arch}|${worksrcpath}|g" ${dir}${qt_libs_dir}/pkgconfig/Qt5WebEngineCore.pc } if { [file exists ${dir}${qt_examples_dir}/declarative/tutorials/gettingStarted/parts/part5/filedialog/Makefile] } { reinplace "s|${worksrcpath}-${arch}|${worksrcpath}|g" ${dir}${qt_examples_dir}/declarative/tutorials/gettingStarted/parts/part5/filedialog/Makefile reinplace -E "/\\w*-arch \\\\/d" ${dir}${qt_examples_dir}/declarative/tutorials/gettingStarted/parts/part5/filedialog/Makefile reinplace -E "/\\w*${arch} \\\\/d" ${dir}${qt_examples_dir}/declarative/tutorials/gettingStarted/parts/part5/filedialog/Makefile reinplace -E {s:-arch +[^ ]+::g} ${dir}${qt_examples_dir}/declarative/tutorials/gettingStarted/parts/part5/filedialog/Makefile reinplace "s|macx-clang-32|macx-clang|g" ${dir}${qt_examples_dir}/declarative/tutorials/gettingStarted/parts/part5/filedialog/Makefile } if { [file exists ${dir}${qt_examples_dir}/multimedia/spectrum/fftreal.framework/fftreal.prl] } { reinplace "s|${worksrcpath}-${arch}|${worksrcpath}|g" ${dir}${qt_examples_dir}/multimedia/spectrum/fftreal.framework/fftreal.prl } if { [file exists ${dir}${qt_examples_dir}/multimedia/spectrum/spectrum.app/Contents/Frameworks/fftreal.framework/fftreal.prl] } { reinplace "s|${worksrcpath}-${arch}|${worksrcpath}|g" ${dir}${qt_examples_dir}/multimedia/spectrum/spectrum.app/Contents/Frameworks/fftreal.framework/fftreal.prl } if { [file exists ${dir}${qt_examples_dir}/sensors/grue/libgruesensor.prl] } { reinplace "s|${worksrcpath}-${arch}|${worksrcpath}|g" ${dir}${qt_examples_dir}/sensors/grue/libgruesensor.prl } } } } post-destroot { # see #44204 foreach f [glob -nocomplain -tails -directory ${destroot}${qt_libs_dir} *.framework] { set framework [file rootname ${f}] set include_list [split ${qt_includes_dir} '/'] set framework_list [split ${qt_libs_dir} '/'] while {[llength ${include_list}] && [llength ${framework_list}]} { set var_include [lindex $include_list 0] set var_framework [lindex $framework_list 0] if { ${var_include} ne ${var_framework} } { break } # remove first element from list set include_list [lreplace ${include_list} 0 0] set framework_list [lreplace ${framework_list} 0 0] } xinstall -d -m 0755 ${destroot}${qt_includes_dir} ln -s [string repeat ../ [llength ${include_list}]][join ${framework_list} /]/${f}/Headers ${destroot}${qt_includes_dir}/${framework} } # .app and non-.app programs are both put in qt_bins_dir # put a link of any .app programs in the ${qt_apps_dir} if { ${qt_bins_dir} ne ${qt_apps_dir} } { xinstall -d -m 0755 ${destroot}${qt_apps_dir} foreach app [glob -nocomplain -tails -directory ${destroot}${qt_bins_dir} *.app] { ln -s ${qt_bins_dir}/${app} ${destroot}${qt_apps_dir} } } # put configuration files in places they will be found automatically if { ${qt_libs_dir} ne "${prefix}/lib" } { # put link to pkgconfig files in place where pkgconfig will find it # most Qt 5 pkgconfig files begin with Qt5, so link should not conflict with any other Qt installations # exceptions: Enginio (new in Qt 5.3, removed in Qt 5.7) xinstall -d -m 0755 ${destroot}${prefix}/lib/pkgconfig foreach pcfile [glob -nocomplain -tails -directory ${destroot}${qt_libs_dir}/pkgconfig *.pc] { ln -s ${qt_libs_dir}/pkgconfig/${pcfile} ${destroot}${prefix}/lib/pkgconfig } # put link to cmake files in place where cmake will find it # most Qt 5 cmake directories begin with Qt5, so link should not conflict with any other Qt installations # exceptions: Enginio (new in Qt 5.3, removed in Qt 5.7) xinstall -d -m 0755 ${destroot}${prefix}/lib/cmake foreach cmakedir [glob -type d -nocomplain -tails -directory ${destroot}${qt_libs_dir}/cmake *] { xinstall -d -m 0755 ${destroot}${prefix}/lib/cmake/${cmakedir} foreach cmakefile [glob -tails -directory ${destroot}${qt_libs_dir}/cmake/${cmakedir} *.cmake] { ln -s ${qt_libs_dir}/cmake/${cmakedir}/${cmakefile} ${destroot}${prefix}/lib/cmake/${cmakedir}/ } } # if cmake finds configuration files in ${prefix}/lib/cmake, CMAKE_CURRENT_LIST_DIR expands to ${prefix}/lib/cmake/xxx # cmake configuration files actually installed in ${qt_cmake_module_dir}/xxx foreach cmakedir [glob -type d -nocomplain -tails -directory ${destroot}${qt_libs_dir}/cmake *] { foreach cmakefile [glob -nocomplain -directory ${destroot}${qt_libs_dir}/cmake/${cmakedir} *.cmake] { reinplace -q "s|\\\${CMAKE_CURRENT_LIST_DIR}|${qt_cmake_module_dir}/${cmakedir}|g" ${cmakefile} } } } } # unsupported livecheck.type none