New Ticket     Tickets     Wiki     Browse Source     Timeline     Roadmap     Ticket Reports     Search

Custom Query (38105 matches)

Filters
 
Or
 
  
 
Columns

Show under each result:


Results (16301 - 16400 of 38105)

Ticket Summary Owner Type Priority Milestone Component
#30604 pkg-config requires version 8.0.0 or later, but libiconv.2.dylib provides version 7.0.0 macports-tickets@… defect Normal ports

Reported by shabanak@…, 4 years ago.

Description

After updating to MacPort 2.0.1 and using the shell command "sudo port selfupdate" and then "sudo port upgrade outdated" I get the error message "Error: Target org.macports.configure returned: configure failure: shell command failed" when it reaches gtk-doc. "Error: Unable to upgrade port: 1". Can not upgrade!

Thank you for any help!

#30606 kdeedu4 @4.6.0 does not install snc@… defect Normal ports

Reported by luis.kornblueh@…, 4 years ago.

Description

During selfupdate kdeedu4 install is broken. Log output is here:

luis@feilung% more /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_kde_kdeedu4/kdeedu4/main.log
version:1
:msg:clean --->  Computing dependencies for kdeedu4:info:clean .:debug:clean Searching for dependency: cmake
:debug:clean Found Dependency: receipt exists for cmake
:debug:clean Searching for dependency: pkgconfig
:debug:clean Found Dependency: receipt exists for pkgconfig
:debug:clean Searching for dependency: automoc
:debug:clean Found Dependency: receipt exists for automoc
:debug:clean Searching for dependency: qt4-mac
:debug:clean Found Dependency: receipt exists for qt4-mac
:debug:clean Searching for dependency: phonon
:debug:clean Found Dependency: receipt exists for phonon
:msg:clean 
:debug:main Executing org.macports.main (kdeedu4)
:debug:main changing euid/egid - current euid: 0 - current egid: 0
:debug:main egid changed to: 505
:debug:main euid changed to: 510
:debug:main Skipping completed org.macports.archivefetch (kdeedu4)
:debug:main Privilege de-escalation not attempted as not running as root.
:debug:main Skipping completed org.macports.fetch (kdeedu4)
:debug:main Privilege de-escalation not attempted as not running as root.
:debug:main Skipping completed org.macports.checksum (kdeedu4)
:debug:main Privilege de-escalation not attempted as not running as root.
:debug:extract extract phase started at Thu Aug  4 21:00:44 CEST 2011
:notice:extract --->  Extracting kdeedu4
:debug:extract Executing proc-pre-org.macports.extract-extract-0
:debug:extract Executing org.macports.extract (kdeedu4)
:debug:extract Executing proc-post-org.macports.extract-extract-0
:debug:extract Executing proc-post-org.macports.extract-extract-1
:error:extract Target org.macports.extract returned: /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_kde_kdeedu4/kdeedu4/work/kdeedu4-4.6.0: no such file or directory
:debug:extract Backtrace: /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_kde_kdeedu4/kdeedu4/work/kdeedu4-4.6.0: no such file or directory
    while executing
"$post $targetname"
:info:extract Warning: the following items did not execute (for kdeedu4): org.macports.install org.macports.extract org.macports.patch org.macports.configure org.macports.build org.macports.destroot
:notice:extract Log for kdeedu4 is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_kde_kdeedu4/kdeedu4/main.log
#30607 libgdiplus needs dependency on libxslt macports-tickets@… defect Normal ports

Reported by david.r.klein@…, 4 years ago.

Description

Hello,

During sudo port install mono libgdiplus2.6.7 fails to build, looks to be caused by libxslt though.

:info:build ld: in /opt/local/lib/libxslt.1.dylib, file was built for unsupported file format which is not the architecture being linked (i386) for architecture i386
:info:build collect2: ld returned 1 exit status.
Error: Failed to install libgdiplus.

Workaround

sudo port clean libgdiplus
sudo port upgrade --enforce-variants cairo +universal
sudo port upgrade --enforce-variants libxslt +universal
sudo port upgrade --enforce-variants libgdiplus +universal
sudo port install mono

See error log for details.

#30610 Atlas install fail on MacOS Lion macports-tickets@… defect Normal ports

Reported by michelbuck@…, 4 years ago.

Description

Hi, I've seen this problem before but not with the error message I am getting. I need LAPACK & BLAS on my Mac and I have just updated to Lion. I've reinstalled Xcode and uninstalled atlas. Now atlas doesn't install anymore, giving me the message

2 Fri Aug 05 09:47:40 michelbuck ~/Cactus$ sudo port install atlas ---> Computing dependencies for atlas ---> Building atlas Error: Target org.macports.build returned: shell command failed (see log for details) Log for atlas is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_atlas/atlas/main.log Error: Status 1 encountered during processing. To report a bug, see <http://guide.macports.org/#project.tickets>

I have also purged and reinstalled gcc44-mp and tried installation after that, with no success. Any help would be much appreciated!

#30611 inconsistent flat receipt cannot be converted to sqlite macports-tickets@… defect Normal base

Reported by n.gilbert@…, 4 years ago.

Description

Trying to see what needed to be upgraded, I used sudo port outdated, which failed. I repeated the command with the debug flag and got the following output. What should I do next?

sudo port -d outdated
Password:
Warning: Converting your registry to sqlite format, this might take a while...
DEBUG: /Library/LaunchDaemons/org.macports.apache2.plist is being used by another port
    while executing
"$regref activate $props(imagefiles) $props(files)"
    invoked from within
"registry::write {
        set regref [registry::entry create $props(name) $props(version) $props(revision) $props(variants) $props(epoch)]
        $re..."
    (procedure "receipt_sqlite::create_entry_l" line 3)
    invoked from within
"receipt_sqlite::create_entry_l $proplist"
    (procedure "registry::convert_to_sqlite" line 62)
    invoked from within
"registry::convert_to_sqlite"
Failed to convert your registry to sqlite!
    while executing
"error "Failed to convert your registry to sqlite!""
    (procedure "mportinit" line 550)
    invoked from within
"mportinit ui_options global_options global_variations"
Error: /opt/local/bin/port: Failed to initialize MacPorts, Failed to convert your registry to sqlite!
#30613 ffmpeg 0.7.1 fails to build on a Yonah (ie 32bit) XCode 4.0 machine devans@… defect Normal ports

Reported by macports@…, 4 years ago.

Description

Attempting to build ffmpeg-0.7.1 eventually results in an error :info:build fatal error: error in backend: Ran out of registers during register allocation! while trying to compile libavcodec/h264_cabac.c (Presumably this occurs when trying to compile the huge function at the bottom of that file.)

Possible fixes might be to attempt to compile that single file as -O2 rather than -O3, or to allow some of forced inline functions to not be inline.

Details are: This is a Yonah Macbook (MacBook1,1 Core Duo, NOT Core 2 Duo) Running OSX 10.6.8. Compiling using XCode 4.0. For obvious reasons, this machine will not be moving on to 10.7 and XCode 4.1.

I've attached the build log.

#30614 texlive-bin: simplify X toolkit variants dports@… defect Normal ports

Reported by ram@…, 4 years ago.

Description

On Lion texlive-bin -motif fails to build with the error:

ld: library not found for -lXmu

installing xorg-libXmu then results in the error:

checking for Xaw headers... yes
checking for SimpleClassPart.extension... yes
checking for XawInitializeWidgetSet in -lXaw... no
checking for XawTextReplace in -lXaw... no
configure: error: Sorry, you will need at least the Xaw header/library files to compile xdvik.

installing xorg-libXaw then results in a successful build.

#30615 youtube-dl broken: ERROR: no fmt_url_map or conn information found in video info ryandesign@… defect Low ports

Reported by fyodor.vassiley@…, 4 years ago.

Description

Youtube-dl is broken. It won't download any video off youtube. See error.

$ youtube-dl http://www.youtube.com/watch?v=lVrnH9G3ABs
[youtube] Setting language
[youtube] lVrnH9G3ABs: Downloading video webpage
[youtube] lVrnH9G3ABs: Downloading video info webpage
[youtube] lVrnH9G3ABs: Extracting video information
ERROR: no fmt_url_map or conn information found in video info

$ port info youtube-dl
youtube-dl @2011.03.29 (net)

Description:          youtube-dl is a small command-line program to download videos from YouTube.com and other sites.
Homepage:             http://rg3.github.com/youtube-dl/

Library Dependencies: python27
Platforms:            darwin
License:              public-domain
Maintainers:          ryandesign@macports.org, openmaintainer@macports.org

the upstream released a new version. See also upstream bug report https://github.com/rg3/youtube-dl/issues/135 (tmanmrt opened this issue August 03, 2011)

#30617 nodejs fails to build if python3x is the currently selected python ciserlohn@… defect Normal ports

Reported by linhares.mauricio@…, 4 years ago.

Description

When trying to build nodejs, if any of the python3x versions is available the build is going to fail with the following trace:

:debug:configure Environment: CPATH='/opt/local/include' CFLAGS='-pipe -O2 -arch x86_64' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-pipe -O2 -arch x86_64' LIBRARY_PATH='/opt/local/lib' MACOSX_DEPLOYMENT_TARGET='10.6' CXX='/Developer/usr/bin/llvm-g++-4.2' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_nodejs/nodejs/work/.CC_PRINT_OPTIONS' F90FLAGS='-pipe -O2 -m64' LDFLAGS='-L/opt/local/lib -arch x86_64' OBJC='/Developer/usr/bin/llvm-gcc-4.2' FCFLAGS='-pipe -O2 -m64' INSTALL='/usr/bin/install -c' OBJCFLAGS='-pipe -O2 -arch x86_64' FFLAGS='-pipe -O2 -m64' CC_PRINT_OPTIONS='YES' CC='/Developer/usr/bin/llvm-gcc-4.2'
:debug:configure Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_nodejs/nodejs/work/node-v0.4.10" && ./configure --prefix=/opt/local'
:debug:configure Executing command line:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_nodejs/nodejs/work/node-v0.4.10" && ./configure --prefix=/opt/local 
:info:configure Traceback (most recent call last):
:info:configure   File "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_nodejs/nodejs/work/node-v0.4.10/tools/waf-light", line 157, in <module>
:info:configure     import Scripting
:info:configure   File "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_nodejs/nodejs/work/node-v0.4.10/tools/wafadmin/Scripting.py", line 146
:info:configure     except Utils.WafError, e:
:info:configure                          ^
:info:configure SyntaxError: invalid syntax
:info:configure shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_nodejs/nodejs/work/node-v0.4.10" && ./configure --prefix=/opt/local " returned error 1

The solution might be ask for the user to select a previous version (like python27) or select an older python if available instead of using the currently selected python.

#30618 pcb @20091103 build error Undefined symbol _min_vertex_net_spacing adam@… defect Normal ports

Reported by david.libault@…, 4 years ago.

Description

Mac OSX 10.6.8 XCode 4.0.2 build 4A2002a

A symbol seems to be missing when building pcb @20091103. Following is the end of /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_pcb/pcb/main.log :

:info:build /Developer/usr/bin/llvm-gcc-4.2 -std=gnu99 -DNDEBUG -pipe -O2 -arch x86_64
:-I/opt/local/include -I/opt/local/include  -I/opt/local/include/dbus-1.0
:-I/opt/local/lib/dbus-1.0/include   -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include
:-I/opt/local/include   -D_REENTRANT -I/opt/local/include/gtk-2.0 -I/opt/local/lib/gtk-2.0/include
:-I/opt/local/include/atk-1.0 -I/opt/local/include/cairo -I/opt/local/include/gdk-pixbuf-2.0
:-I/opt/local/include/pango-1.0 -I/opt/local/include/gio-unix-2.0/ -I/opt/local/include
:-I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include/pixman-1
:-I/opt/local/include/freetype2 -I/opt/local/include/libpng14    -Wall -Wdeclaration-after-statement
: -L/opt/local/lib -arch x86_64 -rdynamic -o pcb action.o autoplace.o autoroute.o buffer.o change.o
:clip.o command.o compat.o copy.o create.o crosshair.o data.o djopt.o draw.o drill.o edif.o error.o
:file.o find.o flags.o fontmode.o heap.o insert.o intersect.o line.o lrealpath.o main.o mirror.o
:misc.o move.o mtspace.o mymem.o netlist.o parse_l.o parse_y.o polygon.o polygon1.o puller.o print.o
:rats.o remove.o report.o res_parse.o res_lex.o rotate.o rtree.o rubberband.o search.o select.o
:set.o strflags.o thermal.o undo.o vector.o vendor.o hid/common/actions.o hid/common/flags.o
:hid/common/hidinit.o hid/common/hidnogui.o hid/common/extents.o hid/common/draw_helpers.o
:hid/common/hid_resource.o toporouter.o dbus-pcbmain.o dbus.o libgtk.a liblpr.a libbom.a libgerber.a
:libnelma.a libpng.a libps.a libgts.a  -lfl -ldl -lm   -L/opt/local/lib -ldbus-1 -lpthread  
:-lXrender  -L/opt/local/lib -lglib-2.0 -lintl   -L/opt/local/lib -lgtk-x11-2.0 -lgdk-x11-2.0
:-latk-1.0 -lpangocairo-1.0 -lXext -lXrender -lXinerama -lXi -lXrandr -lXcursor -lXcomposite
:-lXdamage -lgdk_pixbuf-2.0 -lpangoft2-1.0 -lgio-2.0 -lXfixes -lcairo -lX11 -lpng14 -lpango-1.0 -lm
:-lfreetype -lfontconfig -lgobject-2.0 -lgmodule-2.0 -lgthread-2.0 -lglib-2.0 -lintl   
:-L/opt/local/lib -L/opt/local/lib -L/opt/local/lib -L/opt/local/lib -lXpm -lX11 -ljpeg -lfontconfig
:-lfreetype -lpng -lz -liconv -lgd -lintl -liconv -lc  -Wl,-framework -Wl,CoreFoundation info:build
:Undefined symbols for architecture x86_64: info:build   "_min_vertex_net_spacing", referenced from:
:info:build       _edge_flow in toporouter.o info:build ld: symbol(s) not found for architecture
:x86_64 info:build collect2: ld returned 1 exit status info:build make[4]: *** [pcb] Error 1
:info:build make[4]: Leaving directory
:`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.
:org_release_ports_x11_pcb/pcb/work/pcb-20091103/src' info:build make[3]: *** [all-recursive] Error
:1 info:build make[3]: Leaving directory
:`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.
:org_release_ports_x11_pcb/pcb/work/pcb-20091103/src' info:build make[2]: *** [all] Error 2
:info:build make[2]: Leaving directory
:`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.
:org_release_ports_x11_pcb/pcb/work/pcb-20091103/src' info:build make[1]: *** [all-recursive] Error
:1 info:build make[1]: Leaving directory
:`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.
:org_release_ports_x11_pcb/pcb/work/pcb-20091103' info:build make: *** [all] Error 2 info:build
:make: Leaving directory
:`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.
:org_release_ports_x11_pcb/pcb/work/pcb-20091103' info:build shell command " cd
:"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.
:org_release_ports_x11_pcb/pcb/work/pcb-20091103" && /usr/bin/make -j4 -w all " returned error 2
:error:build Target org.macports.build returned: shell command failed (see log for details)
:debug:build Backtrace: shell command failed (see log for details)
while executing "command_exec build" (procedure "portbuild::build_main" line 8) invoked from within
"$procedure $targetname"
:info:build Warning: the following items did not execute (for pcb): org.macports.activate
:org.macports.build org.macports.destroot org.macports.install notice:build Log for pcb is at:
:/opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.
:org_release_ports_x11_pcb/pcb/main.log
#30619 [Coq] Build failure macports-tickets@… defect Normal ports

Reported by mt1882@…, 4 years ago.

Description

Hi, I use sudo port install coq +coqide +doc to build coq in my mac (version 10.6.8) and I have this problem:

---> Building coq Error: Target org.macports.build returned: shell command failed (see log for details) Log for coq is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_lang_coq/coq/main.log Error: Status 1 encountered during processing.

Can anyone help me to resolve it? Thank you

#30621 fcron won't shut down compconsultant@… defect Normal ports

Reported by thewolf167@…, 4 years ago.

Description

I have fcron @3.0.4_0 installed on both my MBP and iMac running OS X 10.7 (Lion) with Macports 2.0.1. fcron will not shut down in response to either of these commands:

  sudo port unload fcron
  sudo launchctl /Library/Launchdaemons/unload org.macports.plist

The daemondo process for fcron does shut down, but the "fcron -b" process continues to run, regardless of whether fcron is actually running any jobs.

#30623 libsoup build error devans@… defect Normal ports

Reported by giby_the_kid@…, 4 years ago.

Description

I was trying to do an update, unfortunatly it hasn't work; here is the paste:

sth-dw399:~ benjaminleduc$ sudo port upgrade outdated
Password:
--->  Computing dependencies for libsoup
--->  Building libsoup
Error: Target org.macports.build returned: shell command failed (see log for details)
Log for libsoup is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_libsoup/libsoup/main.log
Error: Unable to upgrade port: 1
To report a bug, see <http://guide.macports.org/#project.tickets>
sth-dw399:~ benjaminleduc$ 


It seems that libsoup cannot be build
#30624 Ruby Bundler does not compile on iBook G4 Mac OS X 10.4 Tiger macports-tickets@… defect Normal ports

Reported by maxkrickl@…, 4 years ago.

Description

I ran this command:

$ sudo port install rb19-bundler ---> Computing dependencies for rb19-bundler ---> Dependencies to be installed: rb19-ronn rb19-hpricot rb19-mustache rb19-rdiscount rb19-rspec ---> Staging rb19-hpricot into destroot Error: Target org.macports.destroot returned: shell command failed (see log for details) Error: Failed to install rb19-hpricot Error: Status 1 encountered during processing.

Find the log file attached.

I tried this on an iBook G4 PPC with Mac OS X 10.4, XCode 2.5_8, gcc 4.0.1

#30627 octave-devel crashes on mismatched matrix dimensions michaelld@… defect Normal ports

Reported by jmrosenstock@…, 4 years ago.

Description

I reported this to octave: https://savannah.gnu.org/bugs/index.php?33943

They think something with catching exceptions isn't right with the macports configuration, perhaps related to exception handling.

"The xgemm function is part of Octave (liboctave/dMatrix.cc). When it detects a dimension mismatch, it calls gripe_nonconformant (liboctave/lo-array-gripes.cc). That function calls an error handler using the function pointer current_liboctave_error_with_id_handler. Normally, that is set to lo_error_with_id_handler (set in the function initialize_error_handlers in src/octave.cc). That function ultimately calls octave_throw_execution_exception (libcruft/misc/quit.cc) which ultimately throws a C++ exception which should be caught in the main_loop function (src/toplev.cc). I'd guess the abort is happening because the exception is not caught as it should be."

GNU Octave, version 3.4.2 
Octave was configured for "i386-apple-darwin9.8.0". 
octave:1> [ 1 2 ] * [ 1 2 3 ] 

Program received signal SIGABRT, Aborted. 
0x915b1d52 in __kill () 
(gdb) bt 
#0 0x915b1d52 in __kill () 
#1 0x915b1d44 in kill$UNIX2003 () 
#2 0x91624242 in raise () 
#3 0x91630681 in abort () 
#4 0x970c4a2a in _Unwind_Resume () 
#5 0x023636cd in xgemm () 
#6 0x02363760 in operator* () 
#7 0x017343be in oct_binop_mul () 
#8 0x0145676a in do_binary_op () 
#9 0x014f4832 in tree_binary_expression::rvalue1 () 
#10 0x011ffcce in fold () 
#11 0x012038dd in octave_parse () 
#12 0x012ea641 in main_loop () 
#13 0x0127b92e in octave_main () 
#14 0x00001ff0 in main () 
#30628 C compiler cannot create executables under Lion macports-tickets@… defect Normal ports

Reported by whittaker007@…, 4 years ago.

Description

I am a long time user of Macports, and when I upgraded my existing installation everything seemed to be working until I tried to install a new port and got the "C compiler cannot create executables" error. I was able to run selfupdate, but upgrade outdated failed with the same error.

I decided to start from scratch, uninstalled and cleaned all my ports, downloaded the latest Xcode package from the Apple App Store and installed it, then downloaded the latest MacPorts installer for Lion from the website, and installed that.

All seemed to go OK until I tried to install my first port under the new installation, and it fails with the above error again. Here's what I get:

$ sudo port install -v coreutils
Password:
--->  Computing dependencies for coreutils
--->  Dependencies to be installed: autoconf help2man gettext expat libiconv gperf ncurses ncursesw p5-locale-gettext perl5 perl5.12 perl5 m4 automake gmp libtool
--->  Configuring expat
Error: Target org.macports.configure returned: configure failure: shell command failed (see log for details)
Error: Failed to install expat
Log for expat is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_textproc_expat/expat/main.log
Error: The following dependencies were not installed: autoconf help2man gettext expat libiconv gperf ncurses ncursesw p5-locale-gettext perl5 perl5.12 perl5 m4 automake gmp libtool
Error: Status 1 encountered during processing.
To report a bug, see <http://guide.macports.org/#project.tickets>
$ cat /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_textproc_expat/expat/main.log
version:1
:debug:main changing euid/egid - current euid: 0 - current egid: 0
:debug:main egid changed to: 501
:debug:main euid changed to: 502
:debug:main Executing org.macports.main (expat)
:debug:main Privilege de-escalation not attempted as not running as root.
:debug:main Skipping completed org.macports.archivefetch (expat)
:debug:main Privilege de-escalation not attempted as not running as root.
:debug:main Skipping completed org.macports.fetch (expat)
:debug:main Privilege de-escalation not attempted as not running as root.
:debug:main Skipping completed org.macports.checksum (expat)
:debug:main Privilege de-escalation not attempted as not running as root.
:debug:main Skipping completed org.macports.extract (expat)
:debug:main Privilege de-escalation not attempted as not running as root.
:debug:main Skipping completed org.macports.patch (expat)
:debug:main Privilege de-escalation not attempted as not running as root.
:debug:configure configure phase started at Sun Aug  7 13:37:11 NZST 2011
:notice:configure --->  Configuring expat
:debug:configure Using compiler 'Mac OS X llvm-gcc 4.2'
:debug:configure Executing org.macports.configure (expat)
:debug:configure Environment: CPATH='/opt/local/include' CFLAGS='-pipe -O2 -arch x86_64' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-pipe -O2 -arch x86_64' LIBRARY_PATH='/opt/local/lib' MACOSX_DEPLOYMENT_TARGET='10.7' CXX='/Developer/usr/bin/llvm-g++-4.2' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_textproc_expat/expat/work/.CC_PRINT_OPTIONS' F90FLAGS='-pipe -O2 -m64' LDFLAGS='-L/opt/local/lib -arch x86_64' OBJC='/Developer/usr/bin/llvm-gcc-4.2' FCFLAGS='-pipe -O2 -m64' INSTALL='/usr/bin/install -c' OBJCFLAGS='-pipe -O2 -arch x86_64' FFLAGS='-pipe -O2 -m64' CC_PRINT_OPTIONS='YES' CC='/Developer/usr/bin/llvm-gcc-4.2'
:debug:configure Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_textproc_expat/expat/work/expat-2.0.1" && ./configure --prefix=/opt/local --mandir=/opt/local/share/man'
:debug:configure Executing command line:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_textproc_expat/expat/work/expat-2.0.1" && ./configure --prefix=/opt/local --mandir=/opt/local/share/man 
:info:configure checking build system type... i386-apple-darwin11.0.0
:info:configure checking host system type... i386-apple-darwin11.0.0
:info:configure checking for gcc... /Developer/usr/bin/llvm-gcc-4.2
:info:configure checking for C compiler default output file name... configure: error: C compiler cannot create executables
:info:configure See `config.log' for more details.
:info:configure shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_textproc_expat/expat/work/expat-2.0.1" && ./configure --prefix=/opt/local --mandir=/opt/local/share/man " returned error 77
:error:configure Target org.macports.configure returned: configure failure: shell command failed (see log for details)
:debug:configure Backtrace: configure failure: shell command failed (see log for details)
    while executing
"$procedure $targetname"
:info:configure Warning: the following items did not execute (for expat): org.macports.activate org.macports.configure org.macports.build org.macports.destroot org.macports.install
:error:configure Failed to install expat
:notice:configure Log for expat is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_textproc_expat/expat/main.log

Is there something I'm missing?

#30629 LyX crashes on Lion snc@… defect Normal ports

Reported by carsomyr@…, 4 years ago.

Description

Here is the stack trace:

Application Specific Information:
objc[89472]: garbage collection is OFF
*** error for object 0x7fff7347b860: pointer being freed was not allocated
 

Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   libsystem_kernel.dylib        	0x00007fff8e123ce2 __pthread_kill + 10
1   libsystem_c.dylib             	0x00007fff840ab7d2 pthread_kill + 95
2   libsystem_c.dylib             	0x00007fff8409ca7a abort + 143
3   libsystem_c.dylib             	0x00007fff840fb84c free + 389
4   org.lyx.lyx                   	0x0000000103dbde04 std::basic_string<char, boost::tokenizer_detail::traits_extension<std::char_traits<char> >, std::allocator<char> >::~basic_string() + 82
5   org.lyx.lyx                   	0x0000000103dbd45e lyx::support::getEnvPath(std::string const&) + 654
6   org.lyx.lyx                   	0x0000000103dbd61d lyx::support::prependEnvPath(std::string const&, std::string const&) + 45
7   org.lyx.lyx                   	0x00000001039e5f64 lyx::LyX::init() + 1128
8   org.lyx.lyx                   	0x00000001039e7299 lyx::LyX::init(int&, char**) + 435
9   org.lyx.lyx                   	0x00000001039e7a0e lyx::LyX::exec(int&, char**) + 1074
10  org.lyx.lyx                   	0x00000001038ff956 main + 70
11  org.lyx.lyx                   	0x00000001038ff904 start + 52

Don't know if it's a Lion problem, but I think it crops up when one first installs the boost port and then LyX. Please find attached patches that attempt to address the issue. In short, building against the boost makes things work again. Since my C++ is poor, I have little hope of debugging the "src/support/environment.cpp" file. Perhaps someone can explain why such simple code fails.

#30631 kdegames4 tries to use non-standard OpenAL framework snc@… defect Normal ports

Reported by soehn@…, 4 years ago.

Description

kdegames4 tries to use OpenAL in /Library. I have attached the log-file.

#30632 redland: No rule to make target -lltdl pixilla@… defect Normal ports

Reported by hofione@…, 4 years ago.

Description

installing kde4-baseapps i got the error

 *** No rule to make target `-lltdl', needed by `librdf.la'.  Stop.

As suggested in slackware source (http://slackware.osuosl.org/slackware_source/l/redland/redland.SlackBuild) i've tried

sed -i -e 's# -lltdl$# #' -e '/^LIBS =/s# = # = -lltdl #' src/Makefile

in

/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_www_redland/redland/work/redland-1.0.13

and it worked.

#30634 hfstar @1.13.19-2 hangs during build waqar@… defect Normal ports

Reported by gleirsch@…, 4 years ago.

Description

A never ending sed process is started.

sed -f ../intl/po2tbl.sed ./tar.pot \

| sed -e "s/@PACKAGE NAME@/tar/" > cat-id-tbl.tmp

#30639 sshfs does not work on Lion dports@… defect Normal ports

Reported by fxn@…, 4 years ago.

Description

I just did a clean install of Lion, and with a fresh new machine installed MacPorts and sshfs. The port successfully builds and installs, in particular its macfuse dependency.

But mounting a filesystem throws this error message:

cauchy:~ fxn$ sshfs fxn@172.16.132.128:. prj/rails
fxn@172.16.132.128's password: 
/Library/Filesystems/fusefs.fs/Support/fusefs.kext failed to load - (libkern/kext) requested architecture/executable not found; check the system/kernel logs for errors or try kextutil(8).
the MacFUSE file system is not available (71)

Is there any workaround to that?

#30640 Libcaca build error phw@… defect Normal ports

Reported by giby_the_kid@…, 4 years ago.

Description

Hi,

One more time upgrading my mac port one port failed...

sth-dw399:~ benjaminleduc$ sudo port upgrade outdated
--->  Computing dependencies for libcaca
--->  Building libcaca
Error: Target org.macports.build returned: shell command failed (see log for details)
Log for libcaca is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_libcaca/libcaca/main.log
Error: Unable to upgrade port: 1
To report a bug, see <http://guide.macports.org/#project.tickets>
sth-dw399:~ benjaminleduc$ 

Thanks

#30641 gtk-sharp build error macports-tickets@… defect Normal ports

Reported by giby_the_kid@…, 4 years ago.

Description

Hi

As I have understood how to report a bug, and I am able to produice several per day. Trying to install gtk-sharp, it hasn't worked:

sth-dw399:~ benjaminleduc$ sudo port install gtk-sharp
--->  Computing dependencies for gtk-sharp
--->  Building gtk-sharp
Error: Target org.macports.build returned: shell command failed (see log for details)
Log for gtk-sharp is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_gtk-sharp/gtk-sharp/main.log
Error: Status 1 encountered during processing.
To report a bug, see <http://guide.macports.org/#project.tickets>
#30642 kdelibs4 build error on lion snc@… defect Normal ports

Reported by hofione@…, 4 years ago.

Description
:info:build In file included from /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdelibs4/kdelibs4/work/kdelibs-4.7.0/kjs/nodes.cpp:25:
:info:build In file included from /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdelibs4/kdelibs4/work/kdelibs-4.7.0/kjs/nodes.h:29:
:info:build In file included from /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdelibs4/kdelibs4/work/kdelibs-4.7.0/kjs/Parser.h:30:
:info:build /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdelibs4/kdelibs4/work/kdelibs-4.7.0/kjs/wtf/RefPtr.h:58:55: error: call to function 'adoptRef' that is neither visible in the template definition nor found by argument-dependent lookup
:info:build         PassRefPtr<T> release() { PassRefPtr<T> tmp = adoptRef(m_ptr); m_ptr = 0; return tmp; }
:info:build                                                       ^
:info:build /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_kde_kdelibs4/kdelibs4/work/kdelibs-4.7.0/kjs/nodes.h:340:57: note: in instantiation of member function 'WTF::RefPtr<KJS::ElementNode>::release' requested here
:info:build     PassRefPtr<ElementNode> releaseNext() { return next.release(); }
:info:build                                                         ^
#30643 arm-elf-gcc fails with libgcc error on Lion macports-tickets@… defect Normal ports

Reported by jerkejacobs@…, 4 years ago.

Description
:info:build checking for arm-elf-gcc... /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cross_arm-elf-gcc/arm-elf-gcc/work/build/./gcc/xgcc -B/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cross_arm-elf-gcc/arm-elf-gcc/work/build/./gcc/ -nostdinc -B/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cross_arm-elf-gcc/arm-elf-gcc/work/build/arm-elf/newlib/ -isystem /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cross_arm-elf-gcc/arm-elf-gcc/work/build/arm-elf/newlib/targ-include -isystem /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cross_arm-elf-gcc/arm-elf-gcc/work/gcc-4.6.0/newlib/libc/include -B/opt/local/arm-elf/bin/ -B/opt/local/arm-elf/lib/ -isystem /opt/local/arm-elf/include -isystem /opt/local/arm-elf/sys-include   
:info:build checking for suffix of object files... configure: error: in `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cross_arm-elf-gcc/arm-elf-gcc/work/build/arm-elf/libgcc':
:info:build configure: error: cannot compute suffix of object files: cannot compile
:info:build See `config.log' for more details.
:info:build make[1]: *** [configure-target-libgcc] Error 1
:info:build make[1]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cross_arm-elf-gcc/arm-elf-gcc/work/build'
:info:build make: *** [all] Error 2
:info:build make: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cross_arm-elf-gcc/arm-elf-gcc/work/build'
:info:build shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cross_arm-elf-gcc/arm-elf-gcc/work/build" && /usr/bin/make -j2 -w all AR_FOR_TARGET=arm-elf-ar AS_FOR_TARGET=arm-elf-as LD_FOR_TARGET=arm-elf-ld NM_FOR_TARGET=arm-elf-nm RANLIB_FOR_TARGET=arm-elf-ranlib " returned error 2
:error:build Target org.macports.build returned: shell command failed (see log for details)
:debug:build Backtrace: shell command failed (see log for details)
    while executing
"command_exec build"
    (procedure "portbuild::build_main" line 8)
    invoked from within
"$procedure $targetname"
:info:build Warning: the following items did not execute (for arm-elf-gcc): org.macports.activate org.macports.build org.macports.destroot org.macports.install
:notice:build Log for arm-elf-gcc is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cross_arm-elf-gcc/arm-elf-gcc/main.log
#30644 gobject-introspection fails to build on OSX10.5.8 singingwolfboy@… defect Normal ports

Reported by wlmcderm@…, 4 years ago.

Description

gobject-introspection-0.10.6_0 fails to build. At the point where errors appear in the log (attached), the output is:

:info:build OSError: [Errno 13] Permission denied: '/Users/wes/.cache/g-ir-scanner/06e881d3462dd6af89e7002a4fe05682b10d8021'
:info:build make[2]: *** [GLib-2.0.gir] Error 1
:info:build make[2]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_gobject-introspection/gobject-introspection/work/gobject-introspection-0.10.6'
:info:build make[1]: *** [all-recursive] Error 1
:info:build make[1]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_gobject-introspection/gobject-introspection/work/gobject-introspection-0.10.6'
:info:build make: *** [all] Error 2
:info:build make: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_gobject-introspection/gobject-introspection/work/gobject-introspection-0.10.6'
:info:build shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_gobject-introspection/gobject-introspection/work/gobject-introspection-0.10.6" && /usr/bin/make -w all " returned error 2
:error:build Target org.macports.build returned: shell command failed (see log for details)
:debug:build Backtrace: shell command failed (see log for details)
    while executing
"command_exec build"
    (procedure "portbuild::build_main" line 8)
    invoked from within
"$procedure $targetname"
:info:build Warning: the following items did not execute (for gobject-introspection): org.macports.install org.macports.build org.macports.destroot
:notice:build Log for gobject-introspection is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_gobject-introspection/gobject-introspection/main.log
#30645 Soprano-2.6.52 fails to build on lion pixilla@… defect Normal ports

Reported by hofione@…, 4 years ago.

Description

on Lion

port installed raptor raptor2 redland rasqal

The following ports are currently installed:

raptor2 @2.0.3_2 (active) 
rasqal @0.9.26_1 (active) 
redland @1.0.13_1+db46 (active) 

the following error occures:

:info:build Linking CXX shared module libsoprano_raptorparser.so :info:build cd /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_soprano/soprano/work/build/parsers/raptor && /opt/local/bin/cmake -E cmake_link_script CMakeFiles/soprano_raptorparser.dir/link.txt --verbose=1 
:info:build /Developer/usr/bin/clang++ -pipe -O2 -arch x86_64 -O3 -DNDEBUG -arch x86_64 -bundle -Wl,-headerpad_max_install_names -arch x86_64 -o libsoprano_raptorparser.so CMakeFiles/soprano_raptorparser.dir/raptorparser.cpp.o ../../soprano/libsoprano.4.3.0.dylib -lraptor2 /opt/local/lib/libraptor2.dylib /opt/local/lib/libQtCore.dylib -lpthread 
:info:build ld: library not found for -lraptor2 :info:build clang: error: linker command failed with exit code 1 (use -v to see invocation) 
:info:build make[2]: *** [parsers/raptor/libsoprano_raptorparser.so] Error 1 
:info:build make[2]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_soprano/soprano/work/build' 
:info:build make[1]: *** [parsers/raptor/CMakeFiles/soprano_raptorparser.dir/all] Error 2

please remove

-lraptor2 

from

/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_soprano/soprano/work/build/parsers/raptor/CMakeFiles/soprano_raptorparser.dir/link.txt

#30647 rpm52: buggy perl5_* and python* variants macports-tickets@… defect Normal ports

Reported by blair@…, 4 years ago.

Description

The port has these for build dependencies:

depends_build           port:expat port:neon \
                        port:python25 port:perl5.8 \
                        port:readline port:beecrypt \
                        port:libiconv port:gettext

But the perl and python variants modify the library dependencies:

variant perl5_12 description { use perl 5.12 instead of perl 5.8 } {
        depends_lib-delete      port:perl5.8
        depends_lib-append      port:perl5.12
...

I think the variants should all have depends_lib replaced with depends_build.

Let me know and I can commit this change.

I saw this because I had only perl 5.12 on my system and even with the variant, it was building perl 5.8.

Blair

#30648 ghc: can't read "ghc_bootversion": no such variable gwright@… defect Normal ports

Reported by schinder@…, 4 years ago.

Description

On a 2x2.4 GHz Quad-Core Intel Xeon MacPro, running Lion (OS X 10.7)

--->  Computing dependencies for ghc
--->  Applying patches to ghc
Error: Target org.macports.patch returned: shell command failed (see log for details)
Log for ghc is at: 
/opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_ghc/ghc/main.log
Error: Unable to upgrade port: 1
#30649 zoo @2.10pl1_0 Patch for Lion support macports-tickets@… defect Normal ports
#30651 py27-gtk: /opt/local/lib/libpng12.la: No such file or directory macports-tickets@… defect Normal ports

Reported by pablo@…, 4 years ago.

Description
sudo port upgrade outdated
--->  Computing dependencies for freetype
--->  Fetching archive for freetype
--->  Attempting to fetch freetype-2.4.6_0.darwin_10.x86_64.tbz2 from http://packages.macports.org/freetype
--->  Attempting to fetch freetype-2.4.6_0.darwin_10.x86_64.tbz2.rmd160 from http://packages.macports.org/freetype
--->  Installing freetype @2.4.6_0
--->  Cleaning freetype
--->  Computing dependencies for freetype
--->  Deactivating freetype @2.4.5_1
--->  Cleaning freetype
--->  Activating freetype @2.4.6_0
--->  Cleaning freetype
--->  Computing dependencies for py27-gtk
--->  Building py27-gtk
Error: Target org.macports.build returned: shell command failed (see log for details)
Log for py27-gtk is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py27-gtk/py27-gtk/main.log
Error: Problem while installing py27-gtk
To report a bug, see <http://guide.macports.org/#project.tickets>
#30653 pgplot: patch fails because of .. components in path mcalhoun@… defect Normal ports

Reported by zouhu0628@…, 4 years ago.

Description
--->  Computing dependencies for pgplot
--->  Applying patches to pgplot
Error: Target org.macports.patch returned: shell command failed (see log for details)
Log for pgplot is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_pgplot/pgplot/main.log
Error: Status 1 encountered during processing.
To report a bug, see <http://guide.macports.org/#project.tickets>
#30654 avidemux 2.5.3 does not build under OS X Lion macports-tickets@… defect Normal ports

Reported by thomas_pape@…, 4 years ago.

Description

Building "avidemux" leads to the following error:

Error: Target org.macports.build returned: shell command failed (see log for details)

#30655 geos @3.3.0: Undefined symbols __ZNSt8auto_ptrIN4geos4geom8EnvelopeEEcvSt12auto_ptr_refIT_EIS2_EEv macports-tickets@… defect Normal ports

Reported by nlebedev@…, 4 years ago.

Description

Building geos on os x lion with

sudo port install geos +universal 

or

sudo port install geos

fails with error:

Error: Target org.macports.build returned: shell command failed (see log for details)
Log for geos is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_science_geos/geos/main.log
Error: Status 1 encountered during processing.
To report a bug, see <http://guide.macports.org/#project.tickets>

Logfile attached

#30658 medusa @2.0_0: error: /usr/include/php/ext/pcre/pcrelib/pcre.h: not a directory macports-tickets@… defect Normal ports

Reported by nonstop.server@…, 4 years ago.

Description

Failed to upgrade port medusa from version 1.5_2 to version 2.0_0.

cc1: cc1: error: error: /usr/include/php/ext/pcre/pcrelib/pcre.h: not a directory
/usr/include/php/ext/pcre/pcrelib/pcre.h: not a directory
make[3]: *** [medusa-trace.o] Error 1
make[3]: *** Waiting for unfinished jobs....
make[3]: *** [cvs.o] Error 1

See the attached log files for additional error output.

Version Information:

Mac OS Version:
Darwin 9.8.0 Darwin Kernel Version 9.8.0: Wed Jul 15 16:55:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_I386 i386

Xcode Version:
Xcode 3.1.4
Component versions: DevToolsCore-1204.0; DevToolsSupport-1186.0
BuildVersion: 9M2809

Macports Version:
Version: 2.0.1

% port -v installed name:medusa
The following ports are currently installed:
  medusa @1.5_2 (active) platform='darwin 9' archs='i386'
#30659 ghostscript: libfontconfig.dylib, file was built for i386 which is not the architecture being linked (x86_64) macports-tickets@… defect Normal ports

Reported by rubgb@…, 4 years ago.

Description

When trying to install ghostscript under Snow Leopard 10.6.8 I got the following error messages:

Error: Problem while installing ghostscript
Error: Unable to execute port: upgrade groff failed

I'm including the log file. Many thanks in advance

#30660 atlas install error jameskyle@… defect Normal ports

Reported by zouhu0628@…, 4 years ago.

Description
--->  Building atlas
Error: Target org.macports.build returned: shell command failed (see log for details)
Error: Failed to install atlas
Log for atlas is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_atlas/atlas/main.log
Error: The following dependencies were not installed: atlas
Error: Status 1 encountered during processing.
To report a bug, see <http://guide.macports.org/#project.tickets>
#30661 php5-soap extension not available in fastcgi binary ryandesign@… defect Normal ports

Reported by axolx@…, 4 years ago.

Description

The classes provided by the SOAP PHP extension are not available on cgi, but are available in the command line binary. Both are using the same php.ini. The soap extension shows in the phpinfo() for the command line, but not fastcgi. php throws no errors in fastcgi until i try to instantiate a class provided by the SOAP extensions. I recompiled both php5 and php5-soap. I am running the following versions:

php5 @5.3.6_0+fastcgi+pear
php5-soap @5.3.6_0
lighttpd @1.4.28_0+cml+ssl

Could the SOAP extension not be compiling for the fastcgi binary?

Let me know if I can provide any further information.

#30665 tiemu3: ‘GtkFunction’ undeclared (first use in this function) and.damore@… defect Normal ports

Reported by rubgb@…, 4 years ago.

Description

I have failed to build sucessfully tiemu 3.02 under 10.6.8

This is the part of the log containing the error messages:

:info:build gui/calc/calc.c: In function ‘hid_init’:
:info:build gui/calc/calc.c:589: error: ‘GtkFunction’ undeclared (first use in this function)
:info:build gui/calc/calc.c:589: error: (Each undeclared identifier is reported only once
:info:build gui/calc/calc.c:589: error: for each function it appears in.)
:info:build gui/calc/calc.c:589: error: expected ‘)’ before ‘hid_refresh’
:info:build gui/calc/calc.c:589: error: too few arguments to function ‘g_timeout_add’
:info:build gui/calc/calc.c: In function ‘hid_lcd_rate_set’:
:info:build gui/calc/calc.c:643: error: ‘GtkFunction’ undeclared (first use in this function)
:info:build gui/calc/calc.c:643: error: expected ‘)’ before ‘hid_refresh’
:info:build gui/calc/calc.c:643: error: too few arguments to function ‘g_timeout_add’
:info:build make[2]: *** [gui/calc/calc.o] Error 1
:info:build make[2]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_tiemu3/tiemu3/work/tiemu-3.02/src'
:info:build make[1]: *** [all-recursive] Error 1
:info:build make[1]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_tiemu3/tiemu3/work/tiemu-3.02'
:info:build make: *** [all] Error 2
:info:build make: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_tiemu3/tiemu3/work/tiemu-3.02'
:info:build shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_tiemu3/tiemu3/work/tiemu-3.02" && /usr/bin/make -j2 -w all " returned error 2
:error:build Target org.macports.build returned: shell command failed (see log for details)
:debug:build Backtrace: shell command failed (see log for details)
    while executing
"command_exec build"
    (procedure "portbuild::build_main" line 8)
    invoked from within
"$procedure $targetname"
:info:build Warning: the following items did not execute (for tiemu3): org.macports.activate org.macports.build org.macports.destroot org.macports.install
:notice:build Log for tiemu3 is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_tiemu3/tiemu3/main.log

I have attached the main log for reference purposes as well.
Many thanks in advance,
Ruben

#30666 ImageMagick fails to build on Lion macports-tickets@… defect Normal ports

Reported by alexander.zimmermann@…, 4 years ago.

Description

I have a clean, fresh macports installation. System: Lion with newest xCode (4.1.1).

...
:info:build libtool: link: `/opt/local/lib/libXau.la' is not a valid libtool archive
:info:build make[1]: *** [coders/stegano.la] Error 1
:info:build make[1]: *** Waiting for unfinished jobs....
:info:build make[1]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_ImageMagick/ImageMagick/work/ImageMagick-6.7.1-0'
:info:build make: *** [all] Error 2
...
#30667 Error: Checksum (md5) mismatch for apr-util-1.3.12.tar.bz2 macports-tickets@… defect Normal ports

Reported by hwan186@…, 4 years ago.

Description

I tried installing SVN today and got this error:

MacBook:test user$ sudo port install subversion-perlbindings
Password:
Warning: port definitions are more than two weeks old, consider using selfupdate
---> Computing dependencies for subversion-perlbindings
---> Dependencies to be installed: apr apr-util cyrus-sasl2 neon serf0 subversion
---> Fetching archive for apr
---> Fetching apr
---> Attempting to fetch apr-1.4.5.tar.bz2 from http://mirror.aarnet.edu.au/pub/apache/apr
---> Verifying checksum(s) for apr
---> Extracting apr
---> Applying patches to apr
---> Configuring apr
---> Building apr
---> Staging apr into destroot
---> Installing apr @1.4.5_1
---> Activating apr @1.4.5_1
---> Cleaning apr
---> Fetching archive for apr-util
---> Fetching apr-util
---> Attempting to fetch apr-util-1.3.12.tar.bz2 from http://apache-mirror.dkuug.dk/apr
---> Verifying checksum(s) for apr-util
Error: Checksum (md5) mismatch for apr-util-1.3.12.tar.bz2
Error: Checksum (sha1) mismatch for apr-util-1.3.12.tar.bz2
Error: Checksum (rmd160) mismatch for apr-util-1.3.12.tar.bz2
***
The non-matching file appears to be HTML. See this page for possible reasons for the checksum mismatch:
<https://trac.macports.org/wiki/MisbehavingServers>
***
Error: Target org.macports.checksum returned: Unable to verify file checksums
Error: Failed to install apr-util
Log for apr-util is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_apr-util/apr-util/main.log
Error: The following dependencies were not installed: apr-util cyrus-sasl2 neon serf0 subversion
Error: Status 1 encountered during processing.
To report a bug, see <http://guide.macports.org/#project.tickets>

Please let me know if there is any other information you'd like to know about this bug. And how to fix this bug.

#30668 Gperf 3.0.4 - OS Lion - universal binary error? macports-tickets@… defect Normal ports

Reported by will.pearse@…, 4 years ago.

Description

Hello,

I've been trying to get this to work for a while, but after some debugging, the most helpful output I can get is the following:

sudo port install gperf
Error: Requested variants "" do not match original selection "+universal".
Please use the same variants again, perform 'port clean gperf' or specify the force option (-f).
Error: Status 1 encountered during processing.

If I install from fresh, like this:

sudo port install gperf
--->  Fetching archive for gperf
--->  Attempting to fetch gperf-3.0.4_2.darwin_11.x86_64.tbz2 from http://packages.macports.org/gperf
--->  Fetching gperf
--->  Verifying checksum(s) for gperf
--->  Extracting gperf
--->  Applying patches to gperf
--->  Configuring gperf
--->  Building gperf
--->  Staging gperf into destroot
--->  Installing gperf @3.0.4_2
--->  Activating gperf @3.0.4_2
--->  Cleaning gperf

...it works fine, so presumably it's something to do with the universal binaries. I've seen a few other tickets related to this - unless this is something very strange I'm doing, could this be a general bug? I'm on a 2.66 GHz Intel Core 2 Duo MacBook Pro, with XCode 4.1 installed.

Thanks very much!

Will

#30671 "sudo port install octave" fails on ATLAS build jameskyle@… defect Normal ports

Reported by wchan212@…, 4 years ago.

Description

This is the newest macbook air (2011) on OS X 10.7

Port Version: MacPorts 2.0.1

sudo port install octave fails on ATLAS build... log file attached.

#30677 arm-none-eabi-binutils broken macports-tickets@… defect Normal ports

Reported by michal.schulz@…, 4 years ago.

Description

arm-none-eabi-binutils 2.21.53.0.1 has a bug when compiling armv7-a code (I haven't tested other ARM architectures), it says the r15 register is not allowed:

Error: r15 not allowed here -- `strb pc,[r0,#4]'

Other versions of binutils compile the following test code properly:

        .cpu cortex-a8
        .fpu softvfp
        .text
        strb pc,[r4,#0]
#30678 mysql5 should not read /etc/my.cnf ryandesign@… defect Normal ports

Reported by jeremyhu@…, 4 years ago.

Description
cid:~ admin$ cd /var/mysql/
cid:mysql admin$ ls -al
total 0
drwxr-xr-x   2 _mysql  wheel    68 Aug  9 13:53 .
drwxr-xr-x  37 root    wheel  1258 Aug  9 13:26 ..
cid:mysql admin$ sudo launchctl start org.macports.mysql5
cid:mysql admin$ ls -al
total 0
drwxr-xr-x   3 _mysql  wheel   102 Aug  9 13:53 .
drwxr-xr-x  37 root    wheel  1258 Aug  9 13:26 ..
srwxrwxrwx   1 _mysql  wheel     0 Aug  9 13:53 mysql.sock

MacPorts should not be placing mysql.sock in /var/mysql as that is owned by Apple's MySQL server. This interference causes in-place upgrades from SL Server to Lion Server to fail.

#30683 sysutils/contacts: needs updated xcode project ryandesign@… defect Normal ports

Reported by ecronin@…, 4 years ago.

Description
xcodebuild: error: Unable to read project 'contacts.pbproj'.
	Reason: Project file 'contacts' was written by an unsupported Xcode version (39)

The upstream project is dead, but it still worked with the database at least as recently as Snow Leopard... If someone has XCode 3 around still and can re-save the .pbproj that might be enough to get this building again on XCode 4+

#30684 eigen3: Checksum mismatch eborisch@… defect Normal ports

Reported by dorian@…, 4 years ago.

Description
bash-3.2# port install eigen3
--->  Computing dependencies for eigen3
--->  Fetching archive for eigen3
--->  Attempting to fetch eigen3-3.0.1_2+cmake.darwin_11.x86_64.tgz from http://packages.macports.org/eigen3
--->  Fetching eigen3
--->  Attempting to fetch 3.0.1.tar.bz2 from http://bitbucket.org/eigen/eigen/get/
--->  Verifying checksum(s) for eigen3
Error: Checksum (md5) mismatch for 3.0.1.tar.bz2
Error: Checksum (sha1) mismatch for 3.0.1.tar.bz2
Error: Checksum (rmd160) mismatch for 3.0.1.tar.bz2
Error: Target org.macports.checksum returned: Unable to verify file checksums
Log for eigen3 is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_eigen3/eigen3/main.log
Error: Status 1 encountered during processing.
To report a bug, see <http://guide.macports.org/#project.tickets>
#30687 mutt-devel @1.5.21 Build failure: Undefined symbols for architecture x86_64 mnick@… defect Normal ports

Reported by macports.org@…, 4 years ago.

Description

Hardware:

MacBook Pro, Intel Core 2 Duo

Software:

OS X 10.7, XCode 4.1

Command:

sudo port install mutt-devel +compress +date_conditional +deepif +gdbm +headercache +imap +sasl +smtp +ssl +xlabel

Partial build log:

[...]
:info:build /Developer/usr/bin/llvm-gcc-4.2  -pipe -O2 -arch x86_64  -L/opt/local/lib -L/usr/lib -arch x86_64 -L/opt/local/lib -L/opt/local/lib -L/opt/local/lib -L/opt/local/lib -o mutt addrbook.o alias.o attach.o base64.o browser.o buffy.o color.o crypt.o cryptglue.o commands.o complete.o compose.o copy.o curs_lib.o curs_main.o date.o edit.o enter.o flags.o init.o filter.o from.o getdomain.o group.o handler.o hash.o hdrline.o headers.o help.o hook.o keymap.o main.o mbox.o menu.o mh.o mx.o pager.o parse.o pattern.o postpone.o query.o recvattach.o recvcmd.o rfc822.o rfc1524.o rfc2047.o rfc2231.o rfc3676.o score.o send.o sendlib.o signal.o sort.o status.o system.o thread.o charset.o history.o lib.o muttlib.o editmsg.o mbyte.o url.o ascii.o crypt-mod.o safe_asprintf.o patchlist.o  pgp.o pgpinvoke.o pgpkey.o pgplib.o gnupgparse.o pgpmicalg.o pgppacket.o crypt-mod-pgp-classic.o smime.o crypt-mod-smime-classic.o resize.o pop.o pop_lib.o pop_auth.o smtp.o bcache.o account.o mutt_socket.o mutt_tunnel.o mutt_ssl.o mutt_sasl.o hcache.o md5.o mutt_idna.o  -Limap -limap -lncurses -lssl -lcrypto -lz -lsasl2  -lgdbm -lintl -liconv -liconv   -lidn 
:info:build Undefined symbols for architecture x86_64:
:info:build   "_mutt_test_compress_command", referenced from:
:info:build       _mutt_parse_hook in hook.o
:info:build   "_mutt_slow_close_compressed", referenced from:
:info:build       _mbox_close_mailbox in mbox.o
:info:build       _mx_close_mailbox in mx.o
:info:build   "_mutt_check_mailbox_compressed", referenced from:
:info:build       _mx_check_mailbox in mx.o
:info:build   "_mutt_sync_compressed", referenced from:
:info:build       _sync_mailbox in mx.o
:info:build   "_mutt_fast_close_compressed", referenced from:
:info:build       _mx_fastclose_mailbox in mx.o
:info:build   "_mutt_can_read_compressed", referenced from:
:info:build       _mx_get_magic in mx.o
:info:build   "_mutt_can_append_compressed", referenced from:
:info:build       _mx_open_mailbox in mx.o
:info:build   "_mutt_open_append_compressed", referenced from:
:info:build       _mx_open_mailbox in mx.o
:info:build   "_mutt_open_read_compressed", referenced from:
:info:build       _mx_open_mailbox in mx.o
:info:build ld: symbol(s) not found for architecture x86_64
:info:build collect2: ld returned 1 exit status
:info:build make[2]: *** [mutt] Error 1
:info:build make[2]: *** Waiting for unfinished jobs....
:info:build mv -f .deps/sha1.Tpo .deps/sha1.Po
:info:build make[2]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_mail_mutt-devel/mutt-devel/work/mutt-1.5.21'
:info:build make[1]: *** [all-recursive] Error 1
:info:build make[1]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_mail_mutt-devel/mutt-devel/work/mutt-1.5.21'
:info:build make: *** [all] Error 2
:info:build make: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_mail_mutt-devel/mutt-devel/work/mutt-1.5.21'
:info:build shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_mail_mutt-devel/mutt-devel/work/mutt-1.5.21" && /usr/bin/make -j2 -w all " returned error 2
:error:build Target org.macports.build returned: shell command failed (see log for details)
:debug:build Backtrace: shell command failed (see log for details)
    while executing
"command_exec build"
    (procedure "portbuild::build_main" line 8)
    invoked from within
"$procedure $targetname"
:info:build Warning: the following items did not execute (for mutt-devel): org.macports.activate org.macports.build org.macports.destroot org.macports.install
#30688 cannot install ogre mmoll@… defect Normal ports

Reported by newchief@…, 4 years ago.

Description

It fails with following output in CMakeError.log:

Determining if the C compiler works failed with the following output:
Change Dir: /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_ogre/ogre/work/ogre_src_v1-7-3/CMakeFiles/CMakeTmp

Run Build Command:/opt/local/bin/cmakexbuild -project CMAKE_TRY_COMPILE.xcodeproj build -target cmTryCompileExec -configuration Debug

=== BUILD NATIVE TARGET cmTryCompileExec OF PROJECT CMAKE_TRY_COMPILE WITH CONFIGURATION Debug ===
Check dependencies
error: There is no SDK with the name or path '/'
[BEROR]error: There is no SDK with the name or path '/'
** BUILD FAILED **
#30689 openvrml failed to build raphael@… defect Normal ports

Reported by trog24@…, 4 years ago.

Description

openvrml has not been updated to build against Boost 1.47.0. A patch for this problem can be found at

http://pkgs.fedoraproject.org/gitweb/?p=openvrml.git;a=blob;f=scopeexit.patch;h=5968f64ce73748e9c2191a62005a5a3fcc81f43b;hb=HEAD
#30690 libptp2: parallel build failure macports-tickets@… defect Normal ports

Reported by newchief@…, 4 years ago.

Description

build log says:

:info:build make[1]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_libptp2/libptp2/work/libptp2-1.1.10'
:info:build Making all in src
:info:build make[2]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_libptp2/libptp2/work/libptp2-1.1.10/src'
:info:build if /bin/sh ../libtool --tag=CC --mode=compile /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I. -I. -I..   -I/opt/local/include  -pipe -O2 -arch x86_64 -Wall -Wmissing-declarations -Wmissing-prototypes -MT ptp.lo -MD -MP -MF ".deps/ptp.Tpo" -c -o ptp.lo ptp.c; \
:info:build     then mv -f ".deps/ptp.Tpo" ".deps/ptp.Plo"; else rm -f ".deps/ptp.Tpo"; exit 1; fi
:info:build if /bin/sh ../libtool --tag=CC --mode=compile /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I. -I. -I..   -I/opt/local/include  -pipe -O2 -arch x86_64 -Wall -Wmissing-declarations -Wmissing-prototypes -MT properties.lo -MD -MP -MF ".deps/properties.Tpo" -c -o properties.lo properties.c; \
:info:build     then mv -f ".deps/properties.Tpo" ".deps/properties.Plo"; else rm -f ".deps/properties.Tpo"; exit 1; fi
:info:build mkdir .libs
:info:build  /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I. -I. -I.. -I/opt/local/include -pipe -O2 -arch x86_64 -Wall -Wmissing-declarations -Wmissing-prototypes -MT ptp.lo -MD -MP -MF .deps/ptp.Tpo -c ptp.c  -fno-common -DPIC -o .libs/ptp.o
:info:build  /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I. -I. -I.. -I/opt/local/include -pipe -O2 -arch x86_64 -Wall -Wmissing-declarations -Wmissing-prototypes -MT properties.lo -MD -MP -MF .deps/properties.Tpo -c properties.c  -fno-common -DPIC -o .libs/properties.o
:info:build  /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I. -I. -I.. -I/opt/local/include -pipe -O2 -arch x86_64 -Wall -Wmissing-declarations -Wmissing-prototypes -MT properties.lo -MD -MP -MF .deps/properties.Tpo -c properties.c -o properties.o >/dev/null 2>&1
:info:build if /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I. -I. -I..   -I/opt/local/include -I/opt/local/include -pipe -O2 -arch x86_64 -Wall -Wmissing-declarations -Wmissing-prototypes -MT ptpcam-ptpcam.o -MD -MP -MF ".deps/ptpcam-ptpcam.Tpo" -c -o ptpcam-ptpcam.o `test -f 'ptpcam.c' || echo './'`ptpcam.c; \
:info:build     then mv -f ".deps/ptpcam-ptpcam.Tpo" ".deps/ptpcam-ptpcam.Po"; else rm -f ".deps/ptpcam-ptpcam.Tpo"; exit 1; fi
:info:build ptpcam.c:699: warning: no previous prototype for â
:info:build  /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I. -I. -I.. -I/opt/local/include -pipe -O2 -arch x86_64 -Wall -Wmissing-declarations -Wmissing-prototypes -MT ptp.lo -MD -MP -MF .deps/ptp.Tpo -c ptp.c -o ptp.o >/dev/null 2>&1
:info:build /bin/sh ../libtool --tag=CC --mode=link /usr/bin/gcc-4.2  -pipe -O2 -arch x86_64 -Wall -Wmissing-declarations -Wmissing-prototypes  -L/opt/local/lib -arch x86_64 -Wall -o ptpcam  ptpcam-ptpcam.o -lptp2 -L/opt/local/lib -lusb 
:info:build /usr/bin/gcc-4.2 -pipe -O2 -arch x86_64 -Wall -Wmissing-declarations -Wmissing-prototypes -arch x86_64 -Wall -o ptpcam ptpcam-ptpcam.o  -L/opt/local/lib -lptp2 /opt/local/lib/libusb.dylib /opt/local/lib/libusb-1.0.dylib
:info:build ld: library not found for -lptp2
:info:build collect2: ld returned 1 exit status
:info:build make[2]: *** [ptpcam] Error 1
#30692 Atlas #3.9.46 +gcc45 +universal fails : jameskyle@… defect Normal ports

Reported by david.raulo@…, 4 years ago.

Description

MacPorts 2.0.1, MacOSX 10.6..8, on a MacMini 2.1 Atlas fails to compile in universal mode. The relevant part of the log seems to be:

  :info:build 
  :info:build    BEGIN STAGE 2-1-5: GEMV TUNE at 11:29
  :info:build       gemvN : main kernel 900001:dmvn_C.c written by R. Clint Whaley
  :info:build             mu=4, nu=2, using 26624 Cache Elements
  :info:build               Performance = 936.19 (-25.98 of copy matmul, 51.16 of clock)
  :info:build make -f Makefile INSTALL_LOG/dMVTK.sum pre=d 2>&1 | ./xatlas_tee INSTALL_LOG/dMVTTUNE.LOG
  :info:build make[1]: *** [build] Error 255

I get the following error in <workdir>/atlas-3.9.46-i386/build/bin/INSTALL_LOG/dMVTTUNE.LOG :

  /opt/local/bin/gcc-mp-4.5 -DL2SIZE=4194304 -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_atlas/atlas/work/atlas-3.9.46-i386/build/include -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_atlas/atlas/work/atlas-3.9.46-i386/build/..//include -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_atlas/atlas/work/atlas-3.9.46-i386/build/..//include/contrib -DAdd_ -DF77_INTEGER=int -DStringSunStyle -DATL_OS_OSX -DATL_ARCH_Core2 -DATL_CPUMHZ=1830 -DATL_SSE3 -DATL_SSE2 -DATL_SSE1 -DATL_GAS_x8632 -DPentiumCPS=1830 -DATL_FULL_LAPACK -DATL_NCPU=2 -fomit-frame-pointer -mfpmath=sse -msse3 -O2 -fPIC -m32 -m32 -o xdmvtktime dmvktimeT.o \
                   ATL_dmvtk.o \
  /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_atlas/atlas/work/atlas-3.9.46-i386/build/lib/libtstatlas.a /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_atlas/atlas/work/atlas-3.9.46-i386/build/lib/libatlas.a
  ld: warning: ignoring file ATL_dmvtk.o, file was built for unsupported file format which is not the architecture being linked (i386)
  Undefined symbols for architecture i386:
    "_ATL_UGEMV", referenced from:
        _mvtime in dmvktimeT.o
  ld: symbol(s) not found for architecture i386
#30693 opencv: error: non-const static data member must be initialized out of line ryandesign@… defect Normal ports

Reported by saskathex@…, 4 years ago.

Description

Executed a Selfupdate. Cleaned some ports and also cleaned and uninstalled opencv. Reinstalled opencv -> Error

Uninstalled opencv once again and reinstalled.

Attached the log file

#30695 biblatex-biber @0.9.4 Checksum mismatch dports@… defect Normal ports

Reported by Stochasticus@…, 4 years ago.

Description

Running an "upgrade outdated" operation macport wants to install this package which presumably is a dependency for some latex package I use. Anyway this is the error and I've followed the instructions to clean and download a couple of times:

$ sudo port upgrade outdated
--->  Computing dependencies for biblatex-biber
--->  Fetching archive for biblatex-biber
--->  Attempting to fetch biblatex-biber-0.9.4_0.darwin_11.noarch.tgz from http://packages.macports.org/biblatex-biber
--->  Fetching biblatex-biber
--->  Attempting to fetch biblatex-biber.tar.gz from http://kent.dl.sourceforge.net/project/biblatex-biber/biblatex-biber/0.9.4
--->  Verifying checksum(s) for biblatex-biber
Error: Checksum (rmd160) mismatch for biblatex-biber.tar.gz
Error: Checksum (sha256) mismatch for biblatex-biber.tar.gz
Error: Target org.macports.checksum returned: Unable to verify file checksums
Log for biblatex-biber is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_tex_biblatex-biber/biblatex-biber/main.log
Error: Problem while installing biblatex-biber
To report a bug, see <http://guide.macports.org/#project.tickets>
#30697 gperf: C compiler cannot create executables because of libnotify mcalhoun@… defect Normal ports

Reported by will.pearse@…, 4 years ago.

Description

Hello,

Following on from a previous ticket (#30668) which was closed, I contacted the user group list, who told me I should file another ticket with some more information. Here it is.

When I attempt to load gperf on OS Lion:

sudo port uninstall gperf
--->  Deactivating gperf @3.0.4_2
--->  Cleaning gperf
--->  Uninstalling gperf @3.0.4_2
--->  Cleaning gperf
lb-wdp08maclap:~ will$ sudo port clean gperf
--->  Cleaning gperf
lb-wdp08maclap:~ will$ sudo port clean gperf
--->  Cleaning gperf
lb-wdp08maclap:~ will$ sudo port install gperf +universal
--->  Fetching archive for gperf
--->  Attempting to fetch gperf-3.0.4_2+universal.darwin_11.i386-x86_64.tbz2 from http://packages.macports.org/gperf
--->  Fetching gperf
--->  Verifying checksum(s) for gperf
--->  Extracting gperf
--->  Applying patches to gperf
--->  Configuring gperf
Error: Target org.macports.configure returned: configure failure: shell command failed (see log for details)
Log for gperf is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_gperf/gperf/main.log
Error: Status 1 encountered during processing.
To report a bug, see <http://guide.macports.org/#project.tickets>

...I get the above issues. I'm on a 2.66 GHz Intel Core 2 Duo MacBook Pro, with XCode 4.1 installed, running OS Lion. I've attached my main.log file.

Thanks for your time and for making MacPorts so useful!

Will

#30698 p5-sub-uplevel: Can't locate object method "new" via package "Module::Build" at Build.PL line 8. macports-tickets@… defect Normal ports

Reported by jacobgodserv@…, 4 years ago.

Description

No idea what to make of this one:

:debug:configure Executing command line:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_perl_p5-sub-uplevel/p5-sub-uplevel/work/Sub-Uplevel-0.22" && /opt/local/bin/perl Build.PL installdirs=vendor 
:info:configure Can't locate object method "new" via package "Module::Build" at Build.PL line 8.
#30700 p5-params-validate: version version 0.87 required--this is only version 0.82 macports-tickets@… defect Normal ports

Reported by jacobgodserv@…, 4 years ago.

Description

While building, I got the following error:

:debug:configure Executing command line:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_perl_p5-params-validate/p5-params-validate/work/Params-Validate-1.00" && /opt/local/bin/perl Build.PL installdirs=vendor 
:info:configure version version 0.87 required--this is only version 0.82 at /opt/local/lib/perl5/vendor_perl/5.12.3/Module/Metadata.pm line 19.
#30702 py27-ipython: No module named Shell akitada@… defect Normal ports

Reported by njbutko@…, 4 years ago.

Description

I recently installed py27-ipython. On starting it, I receive the following error:

$ /opt/local/bin/ipython-2.7
Traceback (most recent call last):
  File "/opt/local/bin/ipython-2.7", line 27, in <module>
    import IPython.Shell
ImportError: No module named Shell

Googling, I found: https://github.com/ipython/ipython/issues/286

This suggests that the ipython-2.7 script itself is out of date.

Replacing

import IPython.Shell
IPython.Shell.start().mainloop()

with

import IPython
IPython.embed()

in /opt/local/bin/ipython-2.7 seems to fix the problem, and give a normal ipython shell.

#30706 gnome-utils: baobab won't run, complains about Darwin version devans@… defect Normal ports

Reported by russell.jones@…, 4 years ago.

Description

Steps to reproduce

  1. Start terminal
  2. run baobab

Actual result

$ baobab
Can only run on Darwin 10.7.0 i386
glibtop: read 8 bytes: Resource temporarily unavailable
$

Note glibtop rather than libgtop

Expected result

baobab runs

Am presently running selfupdate, but no relevant packages seem affected: atlas py27-cython texlive-basic wine-devel

#30710 w3m crashes under Lion mnick@… defect Normal ports

Reported by user.emacs@…, 4 years ago.

Description
w3m http://www.nytimes.com

leads to

Segmentation fault: 11

after:

2.24kb loaded

unfortunately, whey I try to run w3m under gdb, the crash does not occur. any hints on how one might debug this? thanks...

#30711 cliclick @1.3.1_0+universal Extract failure macports-tickets@… defect Normal ports

Reported by phosphide@…, 4 years ago.

Description

Copying contents of cliclick.dmg to working direcotory fails, because .Trashes inside the image has no reading permissions

--->  Fetching archive for cliclick
--->  Attempting to fetch cliclick-1.3.1_0+universal.darwin_10.i386.tbz2 from http://packages.macports.org/cliclick
--->  Fetching cliclick
--->  Attempting to fetch cliclick.dmg from http://lil.fr.distfiles.macports.org/cliclick/1.3.1
--->  Verifying checksum(s) for cliclick
--->  Extracting cliclick
Error: Target org.macports.extract returned: shell command failed (see log for details)
Log for cliclick is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_sysutils_cliclick/cliclick/main.log
Error: Status 1 encountered during processing.
$ ls -ld /Volumes/cliclick/.Trashes
d-wx-wx-wt  2 phosphide  staff  68 13 kwi  2010 /Volumes/cliclick/.Trashes

Deleting .Trashes from the image and updating checksums in portfile "solved" it

#30712 geoexpress-sdk: Geo_DSDK-7.0.0.2167.darwin9.universal.gccA40.tar.gz does not exist landonf@… defect Normal ports

Reported by nlebedev@…, 4 years ago.

Description

Building postgis on os x lion with

sudo port install gdal +curl +expat +geos +hdf4 +hdf5 +lzma +mrsid +mysql5 +netcdf +odbc +opencl +openjpeg +postgresql83 +postgresql84 +postgresql90 +python27 +spatialite +sqlite3 +xerces

fails with an error:

--->  Fetching geoexpress-sdk
Error: Target org.macports.fetch returned: NOTE: Due to licensing restrictions, 'Geo_DSDK-7.0.0.2167.darwin9.universal.gccA40.tar.gz' must be manually downloaded from http://www.lizardtech.com/developer/ and placed in /opt/local/var/macports/distfiles/geoexpress-sdk
Error: Failed to install geoexpress-sdk
Log for geoexpress-sdk is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_science_geoexpress-sdk/geoexpress-sdk/main.log
Error: The following dependencies were not installed: geoexpress-sdk giflib hdf4 szip hdf5-18 libgeotiff lzma mysql5 netcdf openjpeg jbigkit lcms2 postgresql83 postgresql84 py27-numpy fftw-3 py27-nose py27-distribute spatialite unixODBC xercesc
Error: Status 1 encountered during processing.

Geo_DSDK-7.0.0.2167.darwin9.universal.gccA40.tar.gz should be manually downloaded, but this version of the tarball does not exist on the http://www.lizardtech.com/developer/ site. It should be updated to "Unified_DSDK_8.0_darwin10.universal.gccA42.tgz". So the install script also should be updated.

#30714 problème installing gnuplot! macports-tickets@… defect Normal ports

Reported by amine_ipt@…, 4 years ago.

Description
--->  Computing dependencies for gnuplot
--->  Fetching archive for gnuplot
--->  Attempting to fetch gnuplot-4.4.3_0.darwin_10.x86_64.tbz2 from http://packages.macports.org/gnuplot
--->  Fetching gnuplot
--->  Verifying checksum(s) for gnuplot
--->  Extracting gnuplot
--->  Applying patches to gnuplot
--->  Configuring gnuplot
--->  Building gnuplot
Error: Target org.macports.build returned: shell command failed (see log for details)
Log for gnuplot is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_gnuplot/gnuplot/main.log
Error: Status 1 encountered during processing.
To report a bug, see <http://guide.macports.org/#project.tickets>
#30715 mod_perl2 fails to install on Lion (with solution) ryan@… defect Normal ports

Reported by lbn@…, 4 years ago.

Description

When installing Apache2 (needed for mod_perl) Perl5.12 gets installed.

Perl5.12 is configured without USE_ITHREAD, which cause mod_perl2 to fail.

I recompiled perl5.12 with USE_ITHREAD defined in config.h, now mod_perl2 installs

#30717 Unable to verify checksum for db46 blair@… defect Normal ports

Reported by sean.m.crowell@…, 4 years ago.

Description

I was attempting to install subversion, and my installation of macports returned this error:

 Computing dependencies for db46
--->  Verifying checksum(s) for db46
Error: Checksum (md5) mismatch for patch.4.6.21.1
Error: Checksum (md5) mismatch for patch.4.6.21.2
Error: Checksum (md5) mismatch for patch.4.6.21.3
Error: Checksum (md5) mismatch for patch.4.6.21.4
Error: Target org.macports.checksum returned: Unable to verify file checksums
Error: Status 1 encountered during processing.
#30718 p5-time-y2038: build hangs macports-tickets@… defect Normal ports

Reported by jmr@…, 4 years ago.

Description

The 10.6/x86_64 buildbot slave times out (no output for 20 minutes) building this port. I've had to make it just fail early for now.

http://build.macports.org/builders/buildports/builds/188/steps/compile/logs/stdio/text

#30719 xmlresume2x @0.1.0 Checksum error macports-tickets@… defect Normal ports

Reported by macports@…, 4 years ago.

Description

Hi, I'm trying to install XMLResume2X on Lion but I get a checksum error.

A closer look at the log seems to indicate the file cannot be fetched.

I tried downloading it manually on macports.org but I couldn't find it there either.

Is this port no longer available? Should it simply be deleted from the port list?

#30721 erlang build failure: "the clang compiler does not support '-MG'" bfulgham@… defect Normal ports

Reported by keith.beaudoin@…, 4 years ago.

Description
--->  Building erlang
Error: Target org.macports.build returned: shell command failed (see log for details)
Log for erlang is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/erlang/main.log
Error: Unable to upgrade port: 1
Error: Unable to execute port: upgrade erlang failed

Log :

version:1
:msg:main --->  Computing dependencies for erlang:info:main .:debug:main Searching for dependency: gawk
:debug:main Found Dependency: receipt exists for gawk
:debug:main Searching for dependency: perl5
:debug:main Found Dependency: receipt exists for perl5
:debug:main Searching for dependency: ncurses
:debug:main Found Dependency: receipt exists for ncurses
:debug:main Searching for dependency: openssl
:debug:main Found Dependency: receipt exists for openssl
:msg:main
:debug:main Executing org.macports.main (erlang)
:debug:main Skipping completed org.macports.archivefetch (erlang)
:debug:main Skipping completed org.macports.fetch (erlang)
:debug:main Skipping completed org.macports.checksum (erlang)
:debug:main Skipping completed org.macports.extract (erlang)
:debug:main Skipping completed org.macports.patch (erlang)
:debug:main Skipping completed org.macports.configure (erlang)
:debug:build build phase started at Thu Aug 11 14:57:24 EDT 2011
:notice:build --->  Building erlang
:debug:build Executing org.macports.build (erlang)
:debug:build port disallows a parallel build
:debug:build Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/erlang/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.7'
:debug:build Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/erlang/work/erlang-R14B03" && /usr/bin/make -w all'
:debug:build Executing command line:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/erlang/work/erlang-R14B03" && /usr/bin/make -w all
:info:build make: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/erlang/work/erlang-R14B03'
:info:build test X"$ERTS_SKIP_DEPEND" = X"true" || (cd erts/emulator && ERL_TOP=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/erlang/work/erlang-R14B03 make generate depend)
:info:build make[1]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/erlang/work/erlang-R14B03/erts/emulator'
:info:build make -f i386-apple-darwin11.0.0/Makefile generate
:info:build make[2]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/erlang/work/erlang-R14B03/erts/emulator'
:info:build make[2]: Nothing to be done for `generate'.
:info:build make[2]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/erlang/work/erlang-R14B03/erts/emulator'
:info:build make -f i386-apple-darwin11.0.0/Makefile depend
:info:build make[2]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/erlang/work/erlang-R14B03/erts/emulator'
:info:build /Developer/usr/bin/clang -MM -MG -mdynamic-no-pic -Ipcre -m64 -O0 -arch x86_64 -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/erlang/work/erlang-R14B03/erts/i386-apple-darwin11.0.0  -no-cpp-precomp -I/opt/local/include -D_XOPEN_SOURCE  -DHAVE_CONFIG_H -Wall -Wstrict-prototypes -Wmissing-prototypes -Wdeclaration-after-statement -DUSE_THREADS -D_THREAD_SAFE -D_REENTRANT -DPOSIX_THREADS  -Ii386-apple-darwin11.0.0/opt/plain -Ibeam -Isys/unix -Isys/common -Ii386-apple-darwin11.0.0 -Izlib  -Ipcre -Ihipe -I../include -I../include/i386-apple-darwin11.0.0 -I../include/internal -I../include/internal/i386-apple-darwin11.0.0 -Idrivers/common beam/atom.c beam/beam_bif_load.c beam/beam_bp.c beam/beam_catches.c beam/beam_debug.c beam/beam_emu.c beam/beam_load.c beam/benchmark.c beam/bif.c beam/big.c beam/binary.c beam/break.c beam/copy.c beam/dist.c beam/elib_memmove.c beam/erl_afit_alloc.c beam/erl_alloc.c beam/erl_alloc_util.c beam/erl_arith.c beam/erl_async.c beam/erl_bestfit_alloc.c beam/erl_bif_binary.c beam/erl_bif_chksum.c beam/erl_bif_ddll.c beam/erl_bif_guard.c beam/erl_bif_info.c beam/erl_bif_lists.c beam/erl_bif_op.c beam/erl_bif_os.c beam/erl_bif_port.c beam/erl_bif_re.c beam/erl_bif_timer.c beam/erl_bif_trace.c beam/erl_bits.c beam/erl_cpu_topology.c beam/erl_db.c beam/erl_db_hash.c beam/erl_db_tree.c beam/erl_db_util.c beam/erl_debug.c beam/erl_drv_thread.c beam/erl_fun.c beam/erl_gc.c beam/erl_goodfit_alloc.c beam/erl_init.c beam/erl_instrument.c beam/erl_lock_check.c beam/erl_lock_count.c beam/erl_math.c beam/erl_md5.c beam/erl_message.c beam/erl_monitors.c beam/erl_mtrace.c beam/erl_nif.c beam/erl_nmgc.c beam/erl_node_tables.c beam/erl_port_task.c beam/erl_posix_str.c beam/erl_printf_term.c beam/erl_process.c beam/erl_process_dict.c beam/erl_process_dump.c beam/erl_process_lock.c beam/erl_resolv_dns.c beam/erl_resolv_nodns.c beam/erl_term.c beam/erl_time_sup.c beam/erl_trace.c beam/erl_unicode.c beam/erl_zlib.c beam/export.c beam/external.c beam/fix_alloc.c beam/hash.c beam/index.c beam/io.c beam/module.c beam/packet_parser.c beam/register.c beam/safe_hash.c beam/time.c beam/utils.c \
:info:build             | sed 's|^\([^:]*:\)|$(OBJDIR)/\1|g;s|i386-apple-darwin11.0.0/opt/plain/|$(TTF_DIR)/|g;s|\([    ]\)/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/erlang/work/erlang-R14B03/|\1$(ERL_TOP)/|g;s|^/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_erlang/erlang/work/erlang-R14B03/|$(ERL_TOP)/|g;s|$(OBJDIR)/erl_poll.o|$(OBJDIR)/erl_poll.kp.o $(OBJDIR)/erl_poll.nkp.o|g;s|$(OBJDIR)/erl_check_io.o|$(OBJDIR)/erl_check_io.kp.o $(OBJDIR)/erl_check_io.nkp.o|g' > i386-apple-darwin11.0.0/depend.mk
:info:build clang: error: the clang compiler does not support '-MG'
:info:build clang: error: the clang compiler does not support '-MG'
:info:build clang: error: the clang compiler does not support '-MG'
:info:build clang: error: the clang compiler does not support '-MG'
:info:build clang: error: the clang compiler does not support '-MG'
:info:build clang: error: the clang compiler does not support '-MG'
:info:build clang: error: the clang compiler does not support '-MG'
:info:build clang: error: the clang compiler does not support '-MG'
#30723 port install gcc46 +gfortran +universal (failed during build on Mac OS X 10.7 lion) macports-tickets@… defect Normal ports

Reported by annacegu@…, 4 years ago.

Description

Hi,

I am not able to build using the following command: port install gcc46 +gfortran +universal

This is on a recently purchased MacBook Pro, with OS X 10.7 lion.

This is part of the main.log file generated, it's too large to copy in its entirety: (/opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc46/gcc46/main.log)

:info:build make[6]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc46/gcc46/work/build/gcc'
:info:build collect2: ld terminated with signal 6 [Abort trap: 6]
:info:build ld: warning: could not create compact unwind for __Unwind_RaiseException: does not use RBP or RSP based frame
:info:build ld: warning: could not create compact unwind for __Unwind_ForcedUnwind: does not use RBP or RSP based frame
:info:build ld: warning: could not create compact unwind for __Unwind_Resume: does not use RBP or RSP based frame
:info:build ld: warning: could not create compact unwind for __Unwind_Resume_or_Rethrow: does not use RBP or RSP based frame
:info:build ld(36978) malloc: *** error for object 0x107c2f840: pointer being freed was not allocated
:info:build *** set a breakpoint in malloc_error_break to debug
:info:build make[3]: *** [libgcc_s.dylib] Error 1

Please help... I have tried compiling gcc & gfortran myself and it's an uphill battle... I would like it done by macports instead.

Regards, Anna.

#30725 argp-standalone does not build with newest Xcode (Build 4D151a) macports-tickets@… defect Normal ports

Reported by mail@…, 4 years ago.

Description
ganymed:~ uwe$ sudo port clean argp-standalone
--->  Cleaning argp-standalone
ganymed:~ uwe$ sudo port -v install argp-standalone
--->  Fetching archive for argp-standalone
--->  argp-standalone-1.3_0.darwin_11.x86_64.tbz2 doesn't seem to exist in /opt/local/var/macports/software/argp-standalone
--->  Attempting to fetch argp-standalone-1.3_0.darwin_11.x86_64.tbz2 from http://packages.macports.org/argp-standalone
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
--->  Fetching argp-standalone
--->  Verifying checksum(s) for argp-standalone
--->  Checksumming argp-standalone-1.3.tar.gz
--->  Extracting argp-standalone
--->  Extracting argp-standalone-1.3.tar.gz
--->  Configuring argp-standalone
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for gcc... /Developer/usr/bin/clang
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables... 
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether /Developer/usr/bin/clang accepts -g... yes
checking for /Developer/usr/bin/clang option to accept ANSI C... none needed
checking for style of include used by make... GNU
checking dependency style of /Developer/usr/bin/clang... gcc3
checking whether make sets $(MAKE)... (cached) yes
checking for ranlib... ranlib
checking for gcc... (cached) /Developer/usr/bin/clang
checking whether we are using the GNU C compiler... (cached) yes
checking whether /Developer/usr/bin/clang accepts -g... (cached) yes
checking for /Developer/usr/bin/clang option to accept ANSI C... (cached) none needed
checking dependency style of /Developer/usr/bin/clang... (cached) gcc3
checking how to run the C preprocessor... /Developer/usr/bin/clang -E
checking for egrep... grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking malloc.h usability... no
checking malloc.h presence... no
checking for malloc.h... no
checking for unistd.h... (cached) yes
checking for an ANSI C-conforming const... yes
checking for inline... inline
checking for size_t... yes
checking for __attribute__... no
checking for working alloca.h... yes
checking for alloca... yes
checking for vprintf... yes
checking for _doprnt... no
checking for strerror... yes
checking for mempcpy... no
checking for strndup... yes
checking for strchrnul... no
checking for putc_unlocked('x', stdout)... yes
checking for flockfile... yes
checking for fputs_unlocked... no
checking for fwrite_unlocked... no
checking for strdup... yes
checking for asprintf... yes
checking whether program_invocation_name is declared... no
checking whether program_invocation_short_name is declared... no
configure: creating ./config.status
config.status: creating Makefile
config.status: creating testsuite/Makefile
config.status: creating config.h
config.status: executing depfiles commands
--->  Building argp-standalone
make: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_argp-standalone/argp-standalone/work/argp-standalone-1.3'
/usr/bin/make  all-recursive
make[1]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_argp-standalone/argp-standalone/work/argp-standalone-1.3'
Making all in .
make[2]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_argp-standalone/argp-standalone/work/argp-standalone-1.3'
if /Developer/usr/bin/clang -DHAVE_CONFIG_H -I. -I. -I.   -I/opt/local/include -I.  -pipe -O2 -arch x86_64 -ggdb3 -Wall -W  -Wmissing-prototypes -Wmissing-declarations -Wstrict-prototypes  -Waggregate-return  -Wpointer-arith -Wbad-function-cast -Wnested-externs -MT argp-ba.o -MD -MP -MF ".deps/argp-ba.Tpo" -c -o argp-ba.o argp-ba.c; \
	then mv -f ".deps/argp-ba.Tpo" ".deps/argp-ba.Po"; else rm -f ".deps/argp-ba.Tpo"; exit 1; fi
if /Developer/usr/bin/clang -DHAVE_CONFIG_H -I. -I. -I.   -I/opt/local/include -I.  -pipe -O2 -arch x86_64 -ggdb3 -Wall -W  -Wmissing-prototypes -Wmissing-declarations -Wstrict-prototypes  -Waggregate-return  -Wpointer-arith -Wbad-function-cast -Wnested-externs -MT argp-eexst.o -MD -MP -MF ".deps/argp-eexst.Tpo" -c -o argp-eexst.o argp-eexst.c; \
	then mv -f ".deps/argp-eexst.Tpo" ".deps/argp-eexst.Po"; else rm -f ".deps/argp-eexst.Tpo"; exit 1; fi
if /Developer/usr/bin/clang -DHAVE_CONFIG_H -I. -I. -I.   -I/opt/local/include -I.  -pipe -O2 -arch x86_64 -ggdb3 -Wall -W  -Wmissing-prototypes -Wmissing-declarations -Wstrict-prototypes  -Waggregate-return  -Wpointer-arith -Wbad-function-cast -Wnested-externs -MT argp-fmtstream.o -MD -MP -MF ".deps/argp-fmtstream.Tpo" -c -o argp-fmtstream.o argp-fmtstream.c; \
	then mv -f ".deps/argp-fmtstream.Tpo" ".deps/argp-fmtstream.Po"; else rm -f ".deps/argp-fmtstream.Tpo"; exit 1; fi
if /Developer/usr/bin/clang -DHAVE_CONFIG_H -I. -I. -I.   -I/opt/local/include -I.  -pipe -O2 -arch x86_64 -ggdb3 -Wall -W  -Wmissing-prototypes -Wmissing-declarations -Wstrict-prototypes  -Waggregate-return  -Wpointer-arith -Wbad-function-cast -Wnested-externs -MT argp-help.o -MD -MP -MF ".deps/argp-help.Tpo" -c -o argp-help.o argp-help.c; \
	then mv -f ".deps/argp-help.Tpo" ".deps/argp-help.Po"; else rm -f ".deps/argp-help.Tpo"; exit 1; fi
if /Developer/usr/bin/clang -DHAVE_CONFIG_H -I. -I. -I.   -I/opt/local/include -I.  -pipe -O2 -arch x86_64 -ggdb3 -Wall -W  -Wmissing-prototypes -Wmissing-declarations -Wstrict-prototypes  -Waggregate-return  -Wpointer-arith -Wbad-function-cast -Wnested-externs -MT argp-parse.o -MD -MP -MF ".deps/argp-parse.Tpo" -c -o argp-parse.o argp-parse.c; \
	then mv -f ".deps/argp-parse.Tpo" ".deps/argp-parse.Po"; else rm -f ".deps/argp-parse.Tpo"; exit 1; fi
if /Developer/usr/bin/clang -DHAVE_CONFIG_H -I. -I. -I.   -I/opt/local/include -I.  -pipe -O2 -arch x86_64 -ggdb3 -Wall -W  -Wmissing-prototypes -Wmissing-declarations -Wstrict-prototypes  -Waggregate-return  -Wpointer-arith -Wbad-function-cast -Wnested-externs -MT argp-pv.o -MD -MP -MF ".deps/argp-pv.Tpo" -c -o argp-pv.o argp-pv.c; \
	then mv -f ".deps/argp-pv.Tpo" ".deps/argp-pv.Po"; else rm -f ".deps/argp-pv.Tpo"; exit 1; fi
argp-help.c:233:15: warning: passing 'const unsigned char *' to parameter of type 'const char *' converts between pointers to integer types with different sign [-Wpointer-sign]
                val = atoi (arg);
                            ^~~
/usr/include/stdlib.h:149:23: note: passing argument to parameter here
int      atoi(const char *);
                          ^
argp-help.c:241:17: warning: passing 'const unsigned char *' to parameter of type 'const char *' converts between pointers to integer types with different sign [-Wpointer-sign]
                  && strncmp (var, un->name, var_len) == 0)
                              ^~~
/usr/include/string.h:94:26: note: passing argument to parameter here
int      strncmp(const char *, const char *, size_t);
                             ^
argp-help.c:606:71: warning: unused parameter 'real' [-Wunused-parameter]
until_short (const struct argp_option *opt, const struct argp_option *real UNUSED,
                                                                      ^
argp-help.c:607:19: warning: unused parameter 'domain' [-Wunused-parameter]
             const char *domain UNUSED, void *cookie UNUSED)
                         ^
argp-help.c:607:40: warning: unused parameter 'cookie' [-Wunused-parameter]
             const char *domain UNUSED, void *cookie UNUSED)
                                              ^
argp-help.c:952:18: warning: unused parameter 'domain' [-Wunused-parameter]
     const char *domain UNUSED, argp_fmtstream_t stream)
                 ^
argp-fmtstream.c:395:1: error: redefinition of a 'extern inline' function 'argp_fmtstream_write' is not supported in C99 mode
__argp_fmtstream_write (argp_fmtstream_t __fs,
argp-help.c:1257:22: warning: unused parameter 'domain' [-Wunused-parameter]
                       const char *domain UNUSED, void *cookie)
                                   ^
argp-help.c:1271:16: warning: unused parameter 'domain' [-Wunused-parameter]
                        const char *domain UNUSED, void *cookie)
                                    ^
argp-help.c:1303:15: warning: unused parameter 'domain' [-Wunused-parameter]
                const char *domain UNUSED, void *cookie)
                            ^
^
./argp-namefrob.h:62:32: note: instantiated from:
#define __argp_fmtstream_write argp_fmtstream_write
                               ^
./argp-fmtstream.h:215:1: note: previous definition is here
__argp_fmtstream_write (argp_fmtstream_t __fs,
^
./argp-fmtstream.h:201:32: note: instantiated from:
#define __argp_fmtstream_write argp_fmtstream_write
                               ^
argp-fmtstream.c:409:1: error: redefinition of a 'extern inline' function 'argp_fmtstream_puts' is not supported in C99 mode
__argp_fmtstream_puts (argp_fmtstream_t __fs, __const char *__str)
^
./argp-namefrob.h:60:31: note: instantiated from:
#define __argp_fmtstream_puts argp_fmtstream_puts
                              ^
./argp-fmtstream.h:229:1: note: previous definition is here
__argp_fmtstream_puts (argp_fmtstream_t __fs, __const char *__str)
^
./argp-fmtstream.h:200:31: note: instantiated from:
#define __argp_fmtstream_puts argp_fmtstream_puts
                              ^
argp-fmtstream.c:422:1: error: redefinition of a 'extern inline' function 'argp_fmtstream_putc' is not supported in C99 mode
__argp_fmtstream_putc (argp_fmtstream_t __fs, int __ch)
^
./argp-namefrob.h:58:31: note: instantiated from:
#define __argp_fmtstream_putc argp_fmtstream_putc
                              ^
./argp-fmtstream.h:242:1: note: previous definition is here
__argp_fmtstream_putc (argp_fmtstream_t __fs, int __ch)
^
./argp-fmtstream.h:199:31: note: instantiated from:
#define __argp_fmtstream_putc argp_fmtstream_putc
                              ^
argp-fmtstream.c:432:1: error: redefinition of a 'extern inline' function 'argp_fmtstream_set_lmargin' is not supported in C99 mode
__argp_fmtstream_set_lmargin (argp_fmtstream_t __fs, size_t __lmargin)
^
./argp-namefrob.h:66:38: note: instantiated from:
#define __argp_fmtstream_set_lmargin argp_fmtstream_set_lmargin
                                     ^
./argp-fmtstream.h:252:1: note: previous definition is here
__argp_fmtstream_set_lmargin (argp_fmtstream_t __fs, size_t __lmargin)
^
./argp-fmtstream.h:202:38: note: instantiated from:
#define __argp_fmtstream_set_lmargin argp_fmtstream_set_lmargin
                                     ^
argp-fmtstream.c:444:1: error: redefinition of a 'extern inline' function 'argp_fmtstream_set_rmargin' is not supported in C99 mode
__argp_fmtstream_set_rmargin (argp_fmtstream_t __fs, size_t __rmargin)
^
./argp-namefrob.h:68:38: note: instantiated from:
#define __argp_fmtstream_set_rmargin argp_fmtstream_set_rmargin
                                     ^
./argp-fmtstream.h:264:1: note: previous definition is here
__argp_fmtstream_set_rmargin (argp_fmtstream_t __fs, size_t __rmargin)
^
./argp-fmtstream.h:203:38: note: instantiated from:
#define __argp_fmtstream_set_rmargin argp_fmtstream_set_rmargin
                                     ^
argp-fmtstream.c:456:1: error: redefinition of a 'extern inline' function 'argp_fmtstream_set_wmargin' is not supported in C99 mode
__argp_fmtstream_set_wmargin (argp_fmtstream_t __fs, size_t __wmargin)
^
./argp-namefrob.h:70:38: note: instantiated from:
#define __argp_fmtstream_set_wmargin argp_fmtstream_set_wmargin
                                     ^
./argp-fmtstream.h:276:1: note: previous definition is here
__argp_fmtstream_set_wmargin (argp_fmtstream_t __fs, size_t __wmargin)
^
./argp-fmtstream.h:204:38: note: instantiated from:
#define __argp_fmtstream_set_wmargin argp_fmtstream_set_wmargin
                                     ^
argp-fmtstream.c:468:1: error: redefinition of a 'extern inline' function 'argp_fmtstream_point' is not supported in C99 mode
__argp_fmtstream_point (argp_fmtstream_t __fs)
^
./argp-namefrob.h:72:32: note: instantiated from:
#define __argp_fmtstream_point argp_fmtstream_point
                               ^
./argp-fmtstream.h:288:1: note: previous definition is here
__argp_fmtstream_point (argp_fmtstream_t __fs)
^
./argp-fmtstream.h:205:32: note: instantiated from:
#define __argp_fmtstream_point argp_fmtstream_point
                               ^
7 errors generated.
if /Developer/usr/bin/clang -DHAVE_CONFIG_H -I. -I. -I.   -I/opt/local/include -I.  -pipe -O2 -arch x86_64 -ggdb3 -Wall -W  -Wmissing-prototypes -Wmissing-declarations -Wstrict-prototypes  -Waggregate-return  -Wpointer-arith -Wbad-function-cast -Wnested-externs -MT argp-pvh.o -MD -MP -MF ".deps/argp-pvh.Tpo" -c -o argp-pvh.o argp-pvh.c; \
	then mv -f ".deps/argp-pvh.Tpo" ".deps/argp-pvh.Po"; else rm -f ".deps/argp-pvh.Tpo"; exit 1; fi
make[2]: *** [argp-fmtstream.o] Error 1
make[2]: *** Waiting for unfinished jobs....
argp-help.c:1733:4: warning: #warning No reasonable value to return [-W#warnings]
#  warning No reasonable value to return
   ^
argp-parse.c:172:37: warning: unused parameter 'arg' [-Wunused-parameter]
argp_version_parser (int key, char *arg UNUSED, struct argp_state *state)
                                    ^
1 warning generated.
10 warnings generated.
make[2]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_argp-standalone/argp-standalone/work/argp-standalone-1.3'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_argp-standalone/argp-standalone/work/argp-standalone-1.3'
make: *** [all] Error 2
make: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_argp-standalone/argp-standalone/work/argp-standalone-1.3'
shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_argp-standalone/argp-standalone/work/argp-standalone-1.3" && /usr/bin/make -j4 -w all " returned error 2
Error: Target org.macports.build returned: shell command failed (see log for details)
Warning: the following items did not execute (for argp-standalone): org.macports.activate org.macports.build org.macports.destroot org.macports.install
Log for argp-standalone is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_argp-standalone/argp-standalone/main.log
Error: Status 1 encountered during processing.
To report a bug, see <http://guide.macports.org/#project.tickets>
#30726 caml-bin-prot build failure erickt@… defect Normal ports

Reported by wchan212@…, 4 years ago.

Description

This is on the latest macbook air (2011) w/ OS X Lion 10.7

I've ran a sudo self port update before.. so should be latest port tree.

Build fails for caml-core. Here is the last few lines of the log file:

:info:build I: Running command '/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_caml-bin-prot/caml-bin-prot/work/bin_prot-1.3.1/_build/lib_test/mac_test'
:info:build msgs: 100000  msg length: 461
:info:build write time: 0.422s  write rate: 237072.41 msgs/s  write throughput: 104.23 MB/s
:info:build  read time: 0.533s   read rate: 187568.77 msgs/s   read throughput: 82.46 MB/s
:info:build I: Changing directory to '/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_caml-bin-prot/caml-bin-prot/work/bin_prot-1.3.1'
:info:build E: Tests had a 50.00% failure rate
:info:build make: *** [all] Error 1
:info:build make: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_caml-bin-prot/caml-bin-prot/work/bin_prot-1.3.1'
:info:build shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_caml-bin-prot/caml-bin-prot/work/bin_prot-1.3.1" && /usr/bin/make -w all " returned error 2
:error:build Target org.macports.build returned: shell command failed (see log for details)
:debug:build Backtrace: shell command failed (see log for details)
    while executing
"command_exec build"
    (procedure "portbuild::build_main" line 8)
    invoked from within
"$procedure $targetname"
:info:build Warning: the following items did not execute (for caml-bin-prot): org.macports.activate org.macports.build org.macports.destroot org.macports.install
:error:build Failed to install caml-bin-prot
:notice:build Log for caml-bin-prot is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_caml-bin-prot/caml-bin-prot/main.log

#30728 epspdf does not work after latest texlive updates dports@… defect Normal ports

Reported by wchan212@…, 4 years ago.

Description

I recently did a sudo port update outated -- which also updated my texlive-pictures package and my epspdf stops working.

I get this error.

/opt/local/bin/epspdf:81:in `require': no such file to load -- epspdfrc (LoadError)
	from /opt/local/bin/epspdf:81

I am not familiar w/ Ruby... but taking a look @ /opt/local/bin/epspdf:81

  76 ###########################################
  77 
  78 # handle auto-detected and saved settings
  79 
  80 #require 'epspdfrc'
  81 require 'epspdfrc'
  82 
  83 ###########################################

Then going to /opt/local and do a find . -name 'epspdfrc' ... I found nothing... looks like someone forgot to include that file into the macport?

#30730 qemu: BSD-Tap-Interface fix macports-tickets@… defect Normal ports

Reported by andy@…, 4 years ago.

Description

hi,

  1. qemu 0.15.0 is out


  1. a patch which fixes the tap-interface creation (you'll need tuntaposx)
    i've already sent a patch to the qemu-net-maintainer
#30731 arm-none-eabi-binutils doesn't compile with newest Xcode (4D151a) macports-tickets@… defect Normal ports

Reported by mail@…, 4 years ago.

Description

libintl.h not found together with clang. Solution: build with llvm-gcc-4.2

#30733 gdm install.sh permission denied devans@… defect Normal ports

Reported by irj@…, 4 years ago.

Description

Installing Gnome, GDM fails

MAC OS X Server 10.6.8, Xcode 4.0.2

:debug:destroot Executing org.macports.destroot (gdm)
:debug:destroot Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_gdm/gdm/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6'
:debug:destroot Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsyn
c.macports.org_release_ports_gnome_gdm/gdm/work/gdm-2.30.6" && /usr/bin/make -w install DESTDIR=/opt/local
/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_gdm/gdm/work/destroot'
:debug:destroot Executing command line:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources
_rsync.macports.org_release_ports_gnome_gdm/gdm/work/gdm-2.30.6" && /usr/bin/make -w install DESTDIR=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_gdm/gdm/wo
rk/destroot
:info:destroot make: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_gdm/gdm/work/gdm-2.30.6'
:info:destroot Making install in data
:info:destroot make[1]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_gdm/gdm/work/gdm-2.30.6/data'
:info:destroot Making install in faces:info:destroot make[2]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_gdm/gdm/work/gdm-2.30.6/data/faces':info:destroot make[3]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_
rsync.macports.org_release_ports_gnome_gdm/gdm/work/gdm-2.30.6/data/faces'
:info:destroot make[3]: Nothing to be done for `install-exec-am'.
:info:destroot test -z "/opt/local/share/pixmaps/faces" || ../.././install-sh -c -d "/opt/local/var/macpor
ts/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_gdm/gdm/work/destroot/opt/
local/share/pixmaps/faces"
:info:destroot /bin/sh: ../.././install-sh: Permission denied
:info:destroot make[3]: *** [install-imageDATA] Error 126
:info:destroot make[3]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_gdm/gdm/work/gdm-2.30.6/data/faces'
:info:destroot make[2]: *** [install-am] Error 2
:info:destroot make[2]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_gdm/gdm/work/gdm-2.30.6/data/faces'
#30734 Unable to install anything because /usr/bin/bzip2 is empty macports-tickets@… defect Normal base

Reported by wilburg@…, 4 years ago.

Description

My machine is a 2007 MacMini with a 1.66 GHx Intel Core Duo running OS-X 10.6.8. I have done a clean install of XCode 3.2.6 and MacPorts 2.0.1. I have been totally unable to get anything to install with MacPorts. For example, the command:

"sudo port install ncftp" yields the following:

sh-3.2# sudo port install ncftp
--->  Computing dependencies for ncftp
--->  Dependencies to be installed: ncurses ncursesw
--->  Activating ncursesw @5.8_0
Error: Target org.macports.activate returned: Image error: Source file /tmp/mpextractOFTEgmPa/opt/local/share/doc/ncursesw/README.txt does not appear to exist (cannot lstat it).  Unable to activate port ncursesw.
Error: Failed to install ncursesw
Log for ncursesw is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_ncursesw/ncursesw/main.log
Error: The following dependencies were not installed: ncurses ncursesw
Error: Status 1 encountered during processing.
To report a bug, see <http://guide.macports.org/#project.tickets>
#30735 Something is wrong with py27-distribute macports-tickets@… defect Normal ports

Reported by francisquinha@…, 4 years ago.

Description

Tried to install py27-game and got the following messages:

$ sudo port install py27-game
---> Computing dependencies for py27-game
Error: Dependency 'py27-distribute' not found.
Error: Status 1 encountered during processing.

After that I tried to install py27-distribute directly...

$ sudo port install py27-distribute
Error: Port py27-distribute not found

#30737 octave-devel: error: 'CGDisplayBitsPerPixel' was not declared in this scope michaelld@… defect Normal ports

Reported by liamg@…, 4 years ago.

Description

I tried installing octave-devel on an OSX 10.7 machine both before and after the Portfile mods of 8/12/2011. It failed with the same error both times:

:info:build display.cc:73:46: error: 'CGDisplayBitsPerPixel' was not declared in this scope

The log file is over 10 MB long so I just attached the last partl I wasn't sure how much to include so I'll send more if necessary. I'm using Macports 2.01 on a MacBook Air. I installed octave-devel on my iMac under Snow Leopard and it still works under Lion.

#30739 selfupdate should not run portindex when base is outdated macports-tickets@… defect Normal MacPorts 2.0.2 base

Reported by ryandesign@…, 4 years ago.

Description

selfupdate syncs the ports tree and then builds the new version of MacPorts. Which means that you've got a new ports tree, full of ports that have new MacPorts 2.0 commands, trying to be parsed by MacPorts 1.9.2, failing, generating tons of errors while trying to build the new portindex:

Adding port textproc/xercesc3
Failed to parse file textproc/xmlcatmgr/Portfile: invalid command name "installs_libs"
Adding port textproc/xmlresume2x
Failed to parse file textproc/xmlto/Portfile: invalid command name "installs_libs"
Adding port www/ZendFramework

selfupdate should first update base, then sync the ports tree with that new version of base. Or if it's not possible to relaunch itself, then it should exit after updating base and tell the user to run selfupdate again.

#30741 siege @2.70 fetch problem macports-tickets@… defect Normal ports

Reported by hanno@…, 4 years ago.

Description

The FTP hosts listed for siege are down.

I had to add "http://www.joedog.org/pub/siege" to the master_sites list to be able to fetch and install siege.

Simple patch for the portfile (locally installed in /opt/local/var/macports/sources/rsync.macports.org/release/ports/www/siege/) is:

--- Portfile.orig	2011-08-13 15:51:00.000000000 +0200
+++ Portfile	2011-08-13 15:51:18.000000000 +0200
@@ -15,7 +15,8 @@
     a configurable number of concurrent simulated users.
 homepage         http://www.joedog.org/index/siege-home
 platforms        darwin
-master_sites     ftp://sid.joedog.org/pub/siege/ \
+master_sites     http://www.joedog.org/pub/siege/ \
+                 ftp://sid.joedog.org/pub/siege/ \
                  ftp://ftp.joedog.org/pub/siege/
 
 checksums        sha1    ee0a0c3a9e6559cf8cbaf717649f6684b0d9643a \
#30742 Spyder 2.0.12 Embedded Docs fix macports-tickets@… defect Normal ports

Reported by mbrethen@…, 4 years ago.

Description

The embedded docs will not launch from within spyder. The developer discovered the problem and it's quite simple: they forgot to add the file protocol

file://

to the URL pointing to index.html, so the MacOS didn't know how to handle it. I'm attaching a patch for affected spyder ports.

Syperlib Issue 720 URL: http://code.google.com/p/spyderlib/issues/detail?id=720

#30743 ImageMagick @6.7.1-5_0 checksum mismatch ryandesign@… defect Normal ports

Reported by gunnlaugur@…, 4 years ago.

Description

Upgrading outdated just now,

--->  Computing dependencies for ImageMagick
--->  Fetching archive for ImageMagick
--->  Attempting to fetch ImageMagick-6.7.1-5_0+q16.darwin_10.x86_64.tbz2 from http://packages.macports.org/ImageMagick
--->  Fetching ImageMagick
--->  Attempting to fetch ImageMagick-6.7.1-5.7z from http://imagemagick.linux-mirror.org/download/
--->  Verifying checksum(s) for ImageMagick
Error: Checksum (sha1) mismatch for ImageMagick-6.7.1-5.7z
Error: Checksum (rmd160) mismatch for ImageMagick-6.7.1-5.7z
Error: Target org.macports.checksum returned: Unable to verify file checksums

The distfile is 7,425,091 bytes and here are the checksums:

$ openssl dgst -sha1 /opt/local/var/macports/distfiles/ImageMagick/ImageMagick-6.7.1-5.7z 
SHA1(/opt/local/var/macports/distfiles/ImageMagick/ImageMagick-6.7.1-5.7z)= 8218b1551cc649c2607b1b95387234b04ad429e5
$ openssl dgst -rmd160 /opt/local/var/macports/distfiles/ImageMagick/ImageMagick-6.7.1-5.7z 
RIPEMD160(/opt/local/var/macports/distfiles/ImageMagick/ImageMagick-6.7.1-5.7z)= bac00fe7badd864b03716011711b50c9e6005845
#30744 apache2: unable to infer tagged configuration ryandesign@… defect Normal ports

Reported by oskari.kokko@…, 4 years ago.

Description

OSX 10.6.8 2.2 Intel Core i7 MacBook Pro MacPorts 2.0.1

============================ ============================

$ sudo port install apache2
--->  Computing dependencies for apache2
--->  Fetching archive for apache2
--->  Attempting to fetch apache2-2.2.19_0+preforkmpm.darwin_10.x86_64.tbz2 from http://packages.macports.org/apache2
--->  Fetching apache2
--->  Attempting to fetch httpd-2.2.19.tar.bz2 from http://apache.mirroring.de/httpd
--->  Attempting to fetch httpd-2.2.19.tar.bz2 from http://lil.fr.distfiles.macports.org/apache2
--->  Verifying checksum(s) for apache2
--->  Extracting apache2
--->  Applying patches to apache2
--->  Configuring apache2
--->  Building apache2
Error: Target org.macports.build returned: shell command failed (see log for details)
Log for apache2 is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_www_apache2/apache2/main.log
Error: Status 1 encountered during processing.

============================ ============================

in main.log:

:info:build make: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_www_apache2/apache2/work/httpd-2.2.19'
:info:build Making all in srclib
:info:build make[1]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_www_apache2/apache2/work/httpd-2.2.19/srclib'
:info:build make[1]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_www_apache2/apache2/work/httpd-2.2.19/srclib'
:info:build Making all in os
:info:build make[1]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_www_apache2/apache2/work/httpd-2.2.19/os'
:info:build Making all in unix
:info:build make[2]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_www_apache2/apache2/work/httpd-2.2.19/os/unix'
:info:build make[3]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_www_apache2/apache2/work/httpd-2.2.19/os/unix'
:info:build /opt/local/share/apr-1/build/libtool --silent --mode=compile /Developer/usr/bin/llvm-gcc-4.2 -I/opt/local/include  -pipe -O2 -arch x86_64  -DDARWIN -DSIGPROCMASK_SETS_THREAD_MASK -no-cpp-precomp -DDARWIN_10  -I/opt/local/include  -I. -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_www_apache2/apache2/work/httpd-2.2.19/os/unix -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_www_apache2/apache2/work/httpd-2.2.19/server/mpm/prefork -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_www_apache2/apache2/work/httpd-2.2.19/modules/http -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_www_apache2/apache2/work/httpd-2.2.19/modules/filters -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_www_apache2/apache2/work/httpd-2.2.19/modules/proxy -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_www_apache2/apache2/work/httpd-2.2.19/include -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_www_apache2/apache2/work/httpd-2.2.19/modules/generators -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_www_apache2/apache2/work/httpd-2.2.19/modules/mappers -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_www_apache2/apache2/work/httpd-2.2.19/modules/database -I/opt/local/include/apr-1 -I/opt/local/include -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_www_apache2/apache2/work/httpd-2.2.19/server -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_www_apache2/apache2/work/httpd-2.2.19/modules/proxy/../generators -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_www_apache2/apache2/work/httpd-2.2.19/modules/ssl -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_www_apache2/apache2/work/httpd-2.2.19/modules/dav/main  -prefer-non-pic -static -c unixd.c && touch unixd.lo
:info:build libtool: compile: unable to infer tagged configuration
:info:build libtool: compile: specify a tag with `--tag'
:info:build make[3]: *** [unixd.lo] Error 1
:info:build make[3]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_www_apache2/apache2/work/httpd-2.2.19/os/unix'
:info:build make[2]: *** [all-recursive] Error 1
:info:build make[2]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_www_apache2/apache2/work/httpd-2.2.19/os/unix'
:info:build make[1]: *** [all-recursive] Error 1
:info:build make[1]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_www_apache2/apache2/work/httpd-2.2.19/os'
:info:build make: *** [all-recursive] Error 1
:info:build make: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_www_apache2/apache2/work/httpd-2.2.19'
:info:build shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_www_apache2/apache2/work/httpd-2.2.19" && /usr/bin/make -j5 -w all " returned error 2
:error:build Target org.macports.build returned: shell command failed (see log for details)
:debug:build Backtrace: shell command failed (see log for details)
    while executing
"command_exec build"
    (procedure "portbuild::build_main" line 8)
    invoked from within
"$procedure $targetname"
:info:build Warning: the following items did not execute (for apache2): org.macports.activate org.macports.build org.macports.destroot org.macports.install
:notice:build Log for apache2 is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_www_apache2/apache2/main.log
#30745 xdvipdfmx not able to use /System/Library/*.dfont fonts, freetype --with-old-mac-fonts involved dports@… defect Normal ports

Reported by pguyot@…, 4 years ago.

Description

xdvipdfmx (port texlive-bin) is tricked into believing it is not configured on a Mac. The reason is that it needs FreeType function FT_GetFilePath_From_Mac_ATS_Name, which is only provided with FreeType 2.4.6 if configured with --with-old-mac-fonts.

As a result, xdvipdfmx cannot work with MacOS-specific font files, including both old (resource-based) fonts and new (data-fork based) fonts, such as /System/Library/*.dfont (e.g. Helvetica and Helvetica Neue in 10.6.8).

FreeType is no longer compiled with --with-old-mac-fonts since r42513 because of bug #15909.

If the conflict with gd2 is still present, we could make this a variant of freetype. If it is not, I believe we should provide freetype with-old-mac-fonts by default as we used to.

Attached are conservative diffs with a variant for freetype and texlive-bin.

#30746 molmol doesn't display graphical widgets under Lion macports-tickets@… defect Normal ports

Reported by howarth@…, 4 years ago.

Description

The molmol program doesn't display its widgets or menus under Lion. This issue looks identical to the problems seen in [MacPorts] #21835: molmol 2k2.0 when the package was originally submitted. At that time, a batch of xorg updates in MacPorts either fixed that problem or it just went latent. Note that this issue occurs both against the X11 from Lion as well as the Xquartz 2.7.0 beta1. It occurs with the MacPorts xorg packages as well as under fink with the Lion X11 packages.

#30747 gavl @1.2 build failure macports-tickets@… defect Normal ports

Reported by kd1aaa@…, 4 years ago.

Description

When I build kdenlive on osx lion, the build fails. The log is attached.

#30748 atlas @3.9.47 build failure (can't find stdint.h) jameskyle@… defect Normal ports

Reported by matt_langston@…, 4 years ago.

Description

Build failure on Mac OS X 10.6.8 because /opt/local/bin/gcc-mp-4.4 can't find stdint.h. Full build log attached. Relevent section of build log included below.

:info:build make[7]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_atlas/atlas/work/atlas-3.9.47/build/src/blas/gemm/KERNEL'
:info:build /opt/local/bin/gcc-mp-4.4 -DL2SIZE=4194304 -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_atlas/atlas/work/atlas-3.9.47/build/include -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_atlas/atlas/work/atlas-3.9.47/build/..//include -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_atlas/atlas/work/atlas-3.9.47/build/..//include/contrib -DAdd_ -DF77_INTEGER=int -DStringSunStyle -DATL_OS_OSX -DATL_ARCH_Core2 -DATL_CPUMHZ=2800 -DATL_SSE3 -DATL_SSE2 -DATL_SSE1 -DATL_USE64BITS -DATL_GAS_x8664 -DPentiumCPS=2800 -DATL_FULL_LAPACK -DATL_NCPU=2 -DATL_UCLEANM -DATL_UCLEANN -DATL_UCLEANK -fomit-frame-pointer -mfpmath=sse -msse3 -O2 -fPIC -m64 -c ATL_sNBmm_b0.c
:info:build ATL_sNBmm_b0.c:54:20: error: stdint.h: No such file or directory
#30749 TMPDIR in root login foils building ports macports-tickets@… defect Low MacPorts 2.0.2 base

Reported by merlyn.macports@…, 4 years ago.

Description

I know, every single doc says you should "sudo port blah blah". But if you're already logged in as root, the "sudo" step seems redundant.

However, ports fail to build! The login process sets up a TMP_DIR environment variable pointing at a directory owned by root. When "port" drops privileges to finish the build, the less-privileged user cannot write into TMP_DIR, and fails.

Using "sudo" takes care of erasing most of the environment, so this isn't normally a problem.

However, if the "port" command could also deliberately remove TMP_DIR from the environment, that would allow direct execution of "port" by root, without worrying about TMP_DIR problems.

#30750 atlas @3.9.47: build fails on PPC G4 under Leopard jameskyle@… defect Normal ports

Reported by razzfazz@…, 4 years ago.

Description

When trying to update atlas on my PowerBook G4 under Leopard 10.5.8, I get the following build failure:

razzepb:~ dub$ port installed atlas
The following ports are currently installed:
  atlas @3.9.37_0+gcc44 (active)

razzepb:~ dub$ sudo port -cuv upgrade atlas
--->  Computing dependencies for atlas.
--->  Building atlas
[...]
make[7]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_atlas/atlas/work/atlas-3.9.47/build/src/blas/gemm/KERNEL'
/usr/bin/gcc -DL2SIZE=4194304 -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_atlas/atlas/work/atlas-3.9.47/build/include -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_atlas/atlas/work/atlas-3.9.47/build/..//include -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_atlas/atlas/work/atlas-3.9.47/build/..//include/contrib -DAdd_ -DF77_INTEGER=int -DStringSunStyle -DATL_OS_OSX -DATL_ARCH_PPCG4 -DATL_CPUMHZ=1499 -DATL_AltiVec -DATL_GAS_PPC -DATL_AVgcc -DWALL -DATL_FULL_LAPACK -DATL_UCLEANM -DATL_UCLEANN -DATL_UCLEANK -DATL_BETA=0 -c -x assembler-with-cpp -maltivec -mabi=altivec ATL_dNBmm_b0.c
ATL_dNBmm_b0.c:406:dst vector instruction is optional for the PowerPC (not allowed without -force_cpusubtype_ALL option)
ATL_dNBmm_b0.c:417:dst vector instruction is optional for the PowerPC (not allowed without -force_cpusubtype_ALL option)
ATL_dNBmm_b0.c:519:dst vector instruction is optional for the PowerPC (not allowed without -force_cpusubtype_ALL option)
ATL_dNBmm_b0.c:523:dstst vector instruction is optional for the PowerPC (not allowed without -force_cpusubtype_ALL option)
ATL_dNBmm_b0.c:801:dst vector instruction is optional for the PowerPC (not allowed without -force_cpusubtype_ALL option)
ATL_dNBmm_b0.c:802:dstst vector instruction is optional for the PowerPC (not allowed without -force_cpusubtype_ALL option)
make[7]: *** [ATL_dNBmm_b0.o] Error 1
[...]

It looks like this issue had previously been fixed in #28413 for atlas 3.9.33, but apparently it has somehow been re-introduced since then.

#30753 Atlas failed to build macports-tickets@… defect Normal ports

Reported by trog24@…, 4 years ago.

Description

When upgrading, the following error occurred:

--->  Building atlas
Error: Target org.macports.build returned: shell command failed (see log for details)
Log for atlas is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_atlas/atlas/main.log
Error: Unable to upgrade port: 1
To report a bug, see <http://guide.macports.org/#project.tickets>

The attached log file showed:

:info:build make -f Makefile INSTALL_LOG/atlas_cacheedge.h pre=d 2>&1 | ./xatlas_tee INSTALL_LOG/dMMCACHEEDGE.LOG
:info:build make[1]: *** [build] Error 255
:info:build make[1]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_atlas/atlas/work/atlas-3.9.47/build'
:info:build make: *** [build] Error 2
:info:build make: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_atlas/atlas/work/atlas-3.9.47/build'
:info:build shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_atlas/atlas/work/atlas-3.9.47/build" && /usr/bin/make -w build " returned error 2
:error:build Target org.macports.build returned: shell command failed (see log for details)
:debug:build Backtrace: shell command failed (see log for details)
    while executing
"command_exec build"
    (procedure "portbuild::build_main" line 8)
    invoked from within
"$procedure $targetname"
:info:build Warning: the following items did not execute (for atlas): org.macports.install org.macports.build org.macports.destroot
:notice:build Log for atlas is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_atlas/atlas/main.log

attached is the log file where other errors occurred prior to the termination error. The platform is a dual 1.73 GHz PowerPC G4 Quicksilver (upgraded) running under MacOS 10.5.8.

#30754 wget 1.13 configure failure: needs gnutls ryandesign@… defect Normal ports

Reported by blair@…, 4 years ago.

Description

Getting this configure failure:

checking for inet_ntoa... yes
checking for socket in -lsocket... no
checking for compress in -lz... yes
checking for gpg_err_init in -lgpg-error... yes
checking for gcry_control in -lgcrypt... yes
checking for main in -lgnutls... no
configure: error: --with-ssl was given, but GNUTLS is not available.
shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_wget/wget/work/wget-1.13" && ./configure --prefix=/opt/local --with-libssl-prefix=/opt/local " returned error 1

I only have openssl on my system, I don't have gnutls.

Here's the variants I have for wget:

$ port variants wget
wget has the variants:
   no_ssl: Build without SSL support
     * conflicts with ssl
(+)ssl: Build with SSL support
     * conflicts with no_ssl
   test
   universal: Build for multiple architectures
#30755 npm: notes should not impose its own newlines ciserlohn@… defect Normal ports

Reported by ryandesign@…, 4 years ago.

Description

The notes command wraps text to the width of the terminal window for you, so you should not unnecessarily impose your own newlines into your notes. This patch fixes this for npm.

#30758 texlive-bin +atsui does not compile on 10.6.8 with llvm-gcc-4.2 dports@… defect Normal ports

Reported by pguyot@…, 4 years ago.

Description

Compilation fails with a strange segfault.

./luatexdir/font/vfovf.w:1579: internal compiler error: Segmentation fault

(full log is attached).

No port is outdated.

#30760 cannot install slime +clisp, because of architecture mismatch easieste@… defect Normal ports

Reported by fu7mu4@…, 4 years ago.

Description

On SnowLeopard x86_64, I cannot install slime after clisp installed. How do I use clisp on slime ?

my command is "sudo port install slime +clisp"

port system says following lines:

--->  Computing dependencies for slime
Error: Cannot install slime for the arch(s) 'x86_64' because
Error: its dependency clisp only supports the arch(s) 'ppc i386'.
Error: Unable to execute port: architecture mismatch
To report a bug, see <http://guide.macports.org/#project.tickets>
#30761 qtiplot just hangs nicos@… defect Normal ports

Reported by bruno.carneirodacunha@…, 4 years ago.

Description

I have a brand new system on Lion. When I try to build qtiplot, compilation goes for around 5 minuts on a i5 system and then a single g++ process hangs at 100% cpu forever. I've rebuilt the chain and let the single process run for 12 hours to no avail. Here's the log, I've found out that compilation hangs at different points.

Please help!

#30763 gawk: missing readline dependency mschamschula@… defect Normal ports

Reported by JDTilley@…, 4 years ago.

Description

OS X 10.7 Lion. Xcode 4.1. This is my first time here and forgive me as I am new to this. I've desperately been trying to install octave-java and so I ended up uninstalling my ports tree and starting from scratch. Now it seems gawk will not build. Here is the error:

:info:build /Developer/usr/bin/llvm-gcc-4.2  -pipe -O2 -arch x86_64  -L/opt/local/lib -arch x86_64 -L/opt/local/lib -o dgawk array.o awkgram.o builtin.o dfa.o ext.o field.o floatcomp.o gawkmisc.o getopt.o getopt1.o io.o main.o msg.o node.o random.o re.o regex.o replace.o version.o eval_d.o profile.o command.o debug.o  -lintl -liconv -lc  -Wl,-framework -Wl,CoreFoundation  -lreadline -lm -lm 
:info:build Undefined symbols for architecture x86_64:
:info:build   "_history_list", referenced from:
:info:build       _serialize in debug.o
:info:build       _do_save in debug.o
:info:build ld: symbol(s) not found for architecture x86_64
:info:build collect2: ld returned 1 exit status
:info:build make[2]: *** [dgawk] Error 1
:info:build make[2]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_lang_gawk/gawk/work/gawk-4.0.0'
:info:build make[1]: *** [all-recursive] Error 1
:info:build make[1]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_lang_gawk/gawk/work/gawk-4.0.0'
:info:build make: *** [all] Error 2
:info:build make: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_lang_gawk/gawk/work/gawk-4.0.0'
:info:build shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_lang_gawk/gawk/work/gawk-4.0.0" && /usr/bin/make -j4 -w all " returned error 2
:error:build Target org.macports.build returned: shell command failed (see log for details)

Anybody have any ideas what this is about?

#30768 qt4-mac fails with clang++ macports-tickets@… defect Normal ports

Reported by bgrupe@…, 4 years ago.

Description

Hi,

when building qt4-mac with clang++ it fails. The default setting for XCode 4.2 was recently changed to use clang/clang++ so after XCode 4.2 final is released more people will encounter this problem.

The qt4-mac port uses some gccisms with precompiled header files and clang++ thus fails.

Please explicitly change the use of the compiler to llvm-g++-4.2 for this port.

#30769 liblrdf does not compile pixilla@… defect Normal ports

Reported by softwarejanitor@…, 4 years ago.

Description

This library is used as part of Lyx. The specific command that illustrates the fault was:

port install liblrdf
--->  Computing dependencies for liblrdf
--->  Building liblrdf
Error: Target org.macports.build returned: shell command failed (see log for details)
Log for liblrdf is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_textproc_liblrdf/liblrdf/main.log
Error: Status 1 encountered during processing.
To report a bug, see <http://guide.macports.org/#project.tickets>

The compile error messages from the log file are:

:info:build libtool: compile:  /Developer/usr/bin/llvm-gcc-4.2 -DHAVE_CONFIG_H -I. -I.. -I/opt/local/include -I./src -I../src -O2 -arch x86_64 -I/opt/local/include/raptor2 -Wall -g -I.. -MT lrdf.lo -MD -MP -MF .deps/lrdf.Tpo -c lrdf.c  -fno-common -DPIC -o .libs/lrdf.o
:info:build lrdf.c:237: warning: type defaults to 'int' in declaration of 'raptor_term'
:info:build lrdf.c:237: error: expected ';', ',' or ')' before '*' token
:info:build lrdf.c: In function 'lrdf_store':
#30770 py27-wxpython does not build on Lion jwa@… defect Normal ports

Reported by soehn@…, 4 years ago.

Description

I have attached the log file. It seems it wants to use gcc-4.0, which is not part of Xcode4.1.

#30771 install problem macports-tickets@… defect Normal ports

Reported by argusdream@…, 4 years ago.

Description

This is the error I am receiving in terminal (10.6.8):

export PATH=/opt/local/bin:/opt/local/sbin:$PATH
export MANPATH=/opt/local/man:$MANPATH
Macks-Mac:~ MacksMac$ if [ `sysctl -n hw.cpu64bit_capable` -eq 1 ] ; then echo "+universal" | sudo tee -a /opt/local/etc/macports/variants.conf; else echo "not 64bit capable"; fi
+universal
Macks-Mac:~ MacksMac$ sudo port install wine
--->  Computing dependencies for wineError: Unable to execute port: can't read "build.cmd": Failed to locate 'make' in path: '/opt/local/bin:/opt/local/sbin:/bin:/sbin:/usr/bin:/usr/sbin' or at its MacPorts configuration time location, did you move it?
Note: See TracQuery for help on using queries.