DEBUG: Changing to port directory: /Users/rschmidt/macports/dports/emulators/dosbox DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /Users/rschmidt/macports/dports/_resources/port1.0/variant_descriptions.conf DEBUG: adding the default universal variant DEBUG: Requested variant darwin is not provided by port dosbox. DEBUG: Requested variant i386 is not provided by port dosbox. DEBUG: Requested variant macosx is not provided by port dosbox. DEBUG: Executing variant darwin_9 provides darwin_9 DEBUG: Changing to port directory: /Users/rschmidt/macports/dports/emulators/dosbox DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /Users/rschmidt/macports/dports/_resources/port1.0/variant_descriptions.conf DEBUG: adding the default universal variant DEBUG: Requested variant darwin is not provided by port dosbox. DEBUG: Requested variant i386 is not provided by port dosbox. DEBUG: Requested variant macosx is not provided by port dosbox. DEBUG: Executing variant darwin_9 provides darwin_9 DEBUG: Executing variant universal provides universal DEBUG: Attempting ln -sf /ppc-i386-10.5-mp/var/macports/build/_Users_rschmidt_macports_dports_emulators_dosbox/work /Users/rschmidt/macports/dports/emulators/dosbox/work DEBUG: Found port in file:///Users/rschmidt/macports/dports/devel/libsdl DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libsdl 1.2.13_6 exists in the ports tree DEBUG: libsdl 1.2.13_6 +universal is the latest installed DEBUG: libsdl 1.2.13_6 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /Users/rschmidt/macports/dports/devel/libsdl DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /Users/rschmidt/macports/dports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /Users/rschmidt/macports/dports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port libsdl. DEBUG: Requested variant i386 is not provided by port libsdl. DEBUG: Requested variant macosx is not provided by port libsdl. DEBUG: Executing variant universal provides universal DEBUG: Found port in file:///Users/rschmidt/macports/dports/x11/xorg-libXext DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXext 1.0.99.4_1 exists in the ports tree DEBUG: xorg-libXext 1.0.99.4_1 +universal is the latest installed DEBUG: xorg-libXext 1.0.99.4_1 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /Users/rschmidt/macports/dports/x11/xorg-libXext DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /Users/rschmidt/macports/dports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXext. DEBUG: Requested variant i386 is not provided by port xorg-libXext. DEBUG: Requested variant macosx is not provided by port xorg-libXext. DEBUG: Executing variant universal provides universal DEBUG: Found port in file:///Users/rschmidt/macports/dports/devel/pkgconfig DEBUG: epoch: in tree: 0 installed: 0 DEBUG: pkgconfig 0.23_1 exists in the ports tree DEBUG: pkgconfig 0.23_1 +universal is the latest installed DEBUG: pkgconfig 0.23_1 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /Users/rschmidt/macports/dports/devel/pkgconfig DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /Users/rschmidt/macports/dports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port pkgconfig. DEBUG: Requested variant i386 is not provided by port pkgconfig. DEBUG: Requested variant macosx is not provided by port pkgconfig. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! pkgconfig 0.23_1 >= pkgconfig 0.23_1 DEBUG: Found port in file:///Users/rschmidt/macports/dports/x11/xorg-xproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-xproto 7.0.15_0 exists in the ports tree DEBUG: xorg-xproto 7.0.15_0 is the latest installed DEBUG: xorg-xproto 7.0.15_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /Users/rschmidt/macports/dports/x11/xorg-xproto DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-xproto. DEBUG: Requested variant i386 is not provided by port xorg-xproto. DEBUG: Requested variant macosx is not provided by port xorg-xproto. DEBUG: No need to upgrade! xorg-xproto 7.0.15_0 >= xorg-xproto 7.0.15_0 DEBUG: Found port in file:///Users/rschmidt/macports/dports/x11/xorg-xextproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-xextproto 7.1.1_0 exists in the ports tree DEBUG: xorg-xextproto 7.1.1_0 is the latest installed DEBUG: xorg-xextproto 7.1.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /Users/rschmidt/macports/dports/x11/xorg-xextproto DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-xextproto. DEBUG: Requested variant i386 is not provided by port xorg-xextproto. DEBUG: Requested variant macosx is not provided by port xorg-xextproto. DEBUG: No need to upgrade! xorg-xextproto 7.1.1_0 >= xorg-xextproto 7.1.1_0 DEBUG: Found port in file:///Users/rschmidt/macports/dports/x11/xorg-libX11 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libX11 1.2.2_0 exists in the ports tree DEBUG: xorg-libX11 1.2.2_0 +universal is the latest installed DEBUG: xorg-libX11 1.2.2_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /Users/rschmidt/macports/dports/x11/xorg-libX11 DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /Users/rschmidt/macports/dports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libX11. DEBUG: Requested variant i386 is not provided by port xorg-libX11. DEBUG: Requested variant macosx is not provided by port xorg-libX11. DEBUG: Executing variant universal provides universal DEBUG: Found port in file:///Users/rschmidt/macports/dports/x11/xorg-xtrans DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-xtrans 1.2.4_0 exists in the ports tree DEBUG: xorg-xtrans 1.2.4_0 is the latest installed DEBUG: xorg-xtrans 1.2.4_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /Users/rschmidt/macports/dports/x11/xorg-xtrans DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-xtrans. DEBUG: Requested variant i386 is not provided by port xorg-xtrans. DEBUG: Requested variant macosx is not provided by port xorg-xtrans. DEBUG: No need to upgrade! xorg-xtrans 1.2.4_0 >= xorg-xtrans 1.2.4_0 DEBUG: Found port in file:///Users/rschmidt/macports/dports/x11/xorg-util-macros DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-util-macros 1.2.2_0 exists in the ports tree DEBUG: xorg-util-macros 1.2.2_0 is the latest installed DEBUG: xorg-util-macros 1.2.2_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /Users/rschmidt/macports/dports/x11/xorg-util-macros DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-util-macros. DEBUG: Requested variant i386 is not provided by port xorg-util-macros. DEBUG: Requested variant macosx is not provided by port xorg-util-macros. DEBUG: No need to upgrade! xorg-util-macros 1.2.2_0 >= xorg-util-macros 1.2.2_0 DEBUG: Found port in file:///Users/rschmidt/macports/dports/devel/autoconf DEBUG: epoch: in tree: 0 installed: 0 DEBUG: autoconf 2.64_2 exists in the ports tree DEBUG: autoconf 2.64_2 is the latest installed DEBUG: autoconf 2.64_2 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /Users/rschmidt/macports/dports/devel/autoconf DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port autoconf. DEBUG: Requested variant i386 is not provided by port autoconf. DEBUG: Requested variant macosx is not provided by port autoconf. DEBUG: Found port in file:///Users/rschmidt/macports/dports/lang/perl5 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: perl5 5.8.9_0 exists in the ports tree DEBUG: perl5 5.8.9_0 is the latest installed DEBUG: perl5 5.8.9_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /Users/rschmidt/macports/dports/lang/perl5 DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port perl5. DEBUG: Requested variant i386 is not provided by port perl5. DEBUG: Requested variant macosx is not provided by port perl5. DEBUG: Found port in file:///Users/rschmidt/macports/dports/lang/perl5.8 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: perl5.8 5.8.9_3 exists in the ports tree DEBUG: perl5.8 5.8.9_3 is the latest installed DEBUG: perl5.8 5.8.9_3 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /Users/rschmidt/macports/dports/lang/perl5.8 DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port perl5.8. DEBUG: Requested variant i386 is not provided by port perl5.8. DEBUG: Requested variant macosx is not provided by port perl5.8. DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3 DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0 DEBUG: Found port in file:///Users/rschmidt/macports/dports/devel/m4 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: m4 1.4.13_0 exists in the ports tree DEBUG: m4 1.4.13_0 +universal is the latest installed DEBUG: m4 1.4.13_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /Users/rschmidt/macports/dports/devel/m4 DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /Users/rschmidt/macports/dports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port m4. DEBUG: Requested variant i386 is not provided by port m4. DEBUG: Requested variant macosx is not provided by port m4. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! m4 1.4.13_0 >= m4 1.4.13_0 DEBUG: Found port in file:///Users/rschmidt/macports/dports/textproc/help2man DEBUG: epoch: in tree: 0 installed: 0 DEBUG: help2man 1.36.4_1 exists in the ports tree DEBUG: help2man 1.36.4_1 +universal is the latest installed DEBUG: help2man 1.36.4_1 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /Users/rschmidt/macports/dports/textproc/help2man DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /Users/rschmidt/macports/dports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port help2man. DEBUG: Requested variant i386 is not provided by port help2man. DEBUG: Requested variant macosx is not provided by port help2man. DEBUG: Executing variant universal provides universal DEBUG: Found port in file:///Users/rschmidt/macports/dports/perl/p5-locale-gettext DEBUG: epoch: in tree: 0 installed: 0 DEBUG: p5-locale-gettext 1.05_0 exists in the ports tree DEBUG: p5-locale-gettext 1.05_0 is the latest installed DEBUG: p5-locale-gettext 1.05_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /Users/rschmidt/macports/dports/perl/p5-locale-gettext DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /Users/rschmidt/macports/dports/_resources/port1.0/group/perl5-1.0.tcl DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port p5-locale-gettext. DEBUG: Requested variant i386 is not provided by port p5-locale-gettext. DEBUG: Requested variant macosx is not provided by port p5-locale-gettext. DEBUG: Found port in file:///Users/rschmidt/macports/dports/devel/gettext DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gettext 0.17_4 exists in the ports tree DEBUG: gettext 0.17_4 +universal is the latest installed DEBUG: gettext 0.17_4 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /Users/rschmidt/macports/dports/devel/gettext DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /Users/rschmidt/macports/dports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /Users/rschmidt/macports/dports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port gettext. DEBUG: Requested variant i386 is not provided by port gettext. DEBUG: Requested variant macosx is not provided by port gettext. DEBUG: Executing variant universal provides universal DEBUG: Found port in file:///Users/rschmidt/macports/dports/textproc/libiconv DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libiconv 1.13_0 exists in the ports tree DEBUG: libiconv 1.13_0 +universal is the latest installed DEBUG: libiconv 1.13_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /Users/rschmidt/macports/dports/textproc/libiconv DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /Users/rschmidt/macports/dports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /Users/rschmidt/macports/dports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port libiconv. DEBUG: Requested variant i386 is not provided by port libiconv. DEBUG: Requested variant macosx is not provided by port libiconv. DEBUG: Executing variant universal provides universal DEBUG: Found port in file:///Users/rschmidt/macports/dports/devel/gperf DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gperf 3.0.4_0 exists in the ports tree DEBUG: gperf 3.0.4_0 +universal is the latest installed DEBUG: gperf 3.0.4_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /Users/rschmidt/macports/dports/devel/gperf DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /Users/rschmidt/macports/dports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /Users/rschmidt/macports/dports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port gperf. DEBUG: Requested variant i386 is not provided by port gperf. DEBUG: Requested variant macosx is not provided by port gperf. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0 DEBUG: No need to upgrade! libiconv 1.13_0 >= libiconv 1.13_0 DEBUG: Found port in file:///Users/rschmidt/macports/dports/devel/ncurses DEBUG: epoch: in tree: 0 installed: 0 DEBUG: ncurses 5.7_0 exists in the ports tree DEBUG: ncurses 5.7_0 +universal is the latest installed DEBUG: ncurses 5.7_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /Users/rschmidt/macports/dports/devel/ncurses DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /Users/rschmidt/macports/dports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /Users/rschmidt/macports/dports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port ncurses. DEBUG: Requested variant i386 is not provided by port ncurses. DEBUG: Requested variant macosx is not provided by port ncurses. DEBUG: Executing variant universal provides universal DEBUG: Found port in file:///Users/rschmidt/macports/dports/devel/ncursesw DEBUG: epoch: in tree: 0 installed: 0 DEBUG: ncursesw 5.7_0 exists in the ports tree DEBUG: ncursesw 5.7_0 +universal is the latest installed DEBUG: ncursesw 5.7_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /Users/rschmidt/macports/dports/devel/ncursesw DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /Users/rschmidt/macports/dports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /Users/rschmidt/macports/dports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port ncursesw. DEBUG: Requested variant i386 is not provided by port ncursesw. DEBUG: Requested variant macosx is not provided by port ncursesw. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0 DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0 DEBUG: Found port in file:///Users/rschmidt/macports/dports/textproc/expat DEBUG: epoch: in tree: 0 installed: 0 DEBUG: expat 2.0.1_0 exists in the ports tree DEBUG: expat 2.0.1_0 +universal is the latest installed DEBUG: expat 2.0.1_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /Users/rschmidt/macports/dports/textproc/expat DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /Users/rschmidt/macports/dports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port expat. DEBUG: Requested variant i386 is not provided by port expat. DEBUG: Requested variant macosx is not provided by port expat. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0 DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4 DEBUG: No need to upgrade! p5-locale-gettext 1.05_0 >= p5-locale-gettext 1.05_0 DEBUG: No need to upgrade! help2man 1.36.4_1 >= help2man 1.36.4_1 DEBUG: No need to upgrade! autoconf 2.64_2 >= autoconf 2.64_2 DEBUG: Found port in file:///Users/rschmidt/macports/dports/devel/automake DEBUG: epoch: in tree: 0 installed: 0 DEBUG: automake 1.11_0 exists in the ports tree DEBUG: automake 1.11_0 +universal is the latest installed DEBUG: automake 1.11_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /Users/rschmidt/macports/dports/devel/automake DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /Users/rschmidt/macports/dports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port automake. DEBUG: Requested variant i386 is not provided by port automake. DEBUG: Requested variant macosx is not provided by port automake. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! automake 1.11_0 >= automake 1.11_0 DEBUG: Found port in file:///Users/rschmidt/macports/dports/devel/libtool DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libtool 2.2.6a_0 exists in the ports tree DEBUG: libtool 2.2.6a_0 +universal is the latest installed DEBUG: libtool 2.2.6a_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /Users/rschmidt/macports/dports/devel/libtool DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /Users/rschmidt/macports/dports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port libtool. DEBUG: Requested variant i386 is not provided by port libtool. DEBUG: Requested variant macosx is not provided by port libtool. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! libtool 2.2.6a_0 >= libtool 2.2.6a_0 DEBUG: Found port in file:///Users/rschmidt/macports/dports/x11/xorg-libXdmcp DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXdmcp 1.0.2_1 exists in the ports tree DEBUG: xorg-libXdmcp 1.0.2_1 +universal is the latest installed DEBUG: xorg-libXdmcp 1.0.2_1 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /Users/rschmidt/macports/dports/x11/xorg-libXdmcp DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /Users/rschmidt/macports/dports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXdmcp. DEBUG: Requested variant i386 is not provided by port xorg-libXdmcp. DEBUG: Requested variant macosx is not provided by port xorg-libXdmcp. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! xorg-libXdmcp 1.0.2_1 >= xorg-libXdmcp 1.0.2_1 DEBUG: Found port in file:///Users/rschmidt/macports/dports/x11/xorg-libXau DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXau 1.0.5_0 exists in the ports tree DEBUG: xorg-libXau 1.0.5_0 +universal is the latest installed DEBUG: xorg-libXau 1.0.5_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /Users/rschmidt/macports/dports/x11/xorg-libXau DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /Users/rschmidt/macports/dports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXau. DEBUG: Requested variant i386 is not provided by port xorg-libXau. DEBUG: Requested variant macosx is not provided by port xorg-libXau. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! xorg-libXau 1.0.5_0 >= xorg-libXau 1.0.5_0 DEBUG: Found port in file:///Users/rschmidt/macports/dports/x11/xorg-bigreqsproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-bigreqsproto 1.1.0_0 exists in the ports tree DEBUG: xorg-bigreqsproto 1.1.0_0 is the latest installed DEBUG: xorg-bigreqsproto 1.1.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /Users/rschmidt/macports/dports/x11/xorg-bigreqsproto DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-bigreqsproto. DEBUG: Requested variant i386 is not provided by port xorg-bigreqsproto. DEBUG: Requested variant macosx is not provided by port xorg-bigreqsproto. DEBUG: No need to upgrade! xorg-bigreqsproto 1.1.0_0 >= xorg-bigreqsproto 1.1.0_0 DEBUG: Found port in file:///Users/rschmidt/macports/dports/x11/xorg-xcmiscproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-xcmiscproto 1.2.0_0 exists in the ports tree DEBUG: xorg-xcmiscproto 1.2.0_0 is the latest installed DEBUG: xorg-xcmiscproto 1.2.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /Users/rschmidt/macports/dports/x11/xorg-xcmiscproto DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-xcmiscproto. DEBUG: Requested variant i386 is not provided by port xorg-xcmiscproto. DEBUG: Requested variant macosx is not provided by port xorg-xcmiscproto. DEBUG: No need to upgrade! xorg-xcmiscproto 1.2.0_0 >= xorg-xcmiscproto 1.2.0_0 DEBUG: Found port in file:///Users/rschmidt/macports/dports/x11/xorg-xf86bigfontproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-xf86bigfontproto 1.2.0_0 exists in the ports tree DEBUG: xorg-xf86bigfontproto 1.2.0_0 is the latest installed DEBUG: xorg-xf86bigfontproto 1.2.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /Users/rschmidt/macports/dports/x11/xorg-xf86bigfontproto DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-xf86bigfontproto. DEBUG: Requested variant i386 is not provided by port xorg-xf86bigfontproto. DEBUG: Requested variant macosx is not provided by port xorg-xf86bigfontproto. DEBUG: No need to upgrade! xorg-xf86bigfontproto 1.2.0_0 >= xorg-xf86bigfontproto 1.2.0_0 DEBUG: Found port in file:///Users/rschmidt/macports/dports/x11/xorg-inputproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-inputproto 1.5.1_0 exists in the ports tree DEBUG: xorg-inputproto 1.5.1_0 is the latest installed DEBUG: xorg-inputproto 1.5.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /Users/rschmidt/macports/dports/x11/xorg-inputproto DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-inputproto. DEBUG: Requested variant i386 is not provided by port xorg-inputproto. DEBUG: Requested variant macosx is not provided by port xorg-inputproto. DEBUG: No need to upgrade! xorg-inputproto 1.5.1_0 >= xorg-inputproto 1.5.1_0 DEBUG: Found port in file:///Users/rschmidt/macports/dports/x11/xorg-kbproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-kbproto 1.0.3_0 exists in the ports tree DEBUG: xorg-kbproto 1.0.3_0 is the latest installed DEBUG: xorg-kbproto 1.0.3_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /Users/rschmidt/macports/dports/x11/xorg-kbproto DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-kbproto. DEBUG: Requested variant i386 is not provided by port xorg-kbproto. DEBUG: Requested variant macosx is not provided by port xorg-kbproto. DEBUG: No need to upgrade! xorg-kbproto 1.0.3_0 >= xorg-kbproto 1.0.3_0 DEBUG: No need to upgrade! xorg-libX11 1.2.2_0 >= xorg-libX11 1.2.2_0 DEBUG: No need to upgrade! xorg-libXext 1.0.99.4_1 >= xorg-libXext 1.0.99.4_1 DEBUG: Found port in file:///Users/rschmidt/macports/dports/x11/xorg-libXrandr DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXrandr 1.3.0_1 exists in the ports tree DEBUG: xorg-libXrandr 1.3.0_1 +universal is the latest installed DEBUG: xorg-libXrandr 1.3.0_1 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /Users/rschmidt/macports/dports/x11/xorg-libXrandr DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /Users/rschmidt/macports/dports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXrandr. DEBUG: Requested variant i386 is not provided by port xorg-libXrandr. DEBUG: Requested variant macosx is not provided by port xorg-libXrandr. DEBUG: Executing variant universal provides universal DEBUG: Found port in file:///Users/rschmidt/macports/dports/x11/xrender DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xrender 0.9.4_6 exists in the ports tree DEBUG: xrender 0.9.4_6 +universal is the latest installed DEBUG: xrender 0.9.4_6 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /Users/rschmidt/macports/dports/x11/xrender DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /Users/rschmidt/macports/dports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xrender. DEBUG: Requested variant i386 is not provided by port xrender. DEBUG: Requested variant macosx is not provided by port xrender. DEBUG: Executing variant universal provides universal DEBUG: Found port in file:///Users/rschmidt/macports/dports/x11/xorg-renderproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-renderproto 0.11_0 exists in the ports tree DEBUG: xorg-renderproto 0.11_0 is the latest installed DEBUG: xorg-renderproto 0.11_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /Users/rschmidt/macports/dports/x11/xorg-renderproto DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-renderproto. DEBUG: Requested variant i386 is not provided by port xorg-renderproto. DEBUG: Requested variant macosx is not provided by port xorg-renderproto. DEBUG: No need to upgrade! xorg-renderproto 0.11_0 >= xorg-renderproto 0.11_0 DEBUG: No need to upgrade! xrender 0.9.4_6 >= xrender 0.9.4_6 DEBUG: Found port in file:///Users/rschmidt/macports/dports/x11/xorg-randrproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-randrproto 1.3.0_0 exists in the ports tree DEBUG: xorg-randrproto 1.3.0_0 is the latest installed DEBUG: xorg-randrproto 1.3.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /Users/rschmidt/macports/dports/x11/xorg-randrproto DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-randrproto. DEBUG: Requested variant i386 is not provided by port xorg-randrproto. DEBUG: Requested variant macosx is not provided by port xorg-randrproto. DEBUG: No need to upgrade! xorg-randrproto 1.3.0_0 >= xorg-randrproto 1.3.0_0 DEBUG: No need to upgrade! xorg-libXrandr 1.3.0_1 >= xorg-libXrandr 1.3.0_1 DEBUG: No need to upgrade! libsdl 1.2.13_6 >= libsdl 1.2.13_6 DEBUG: Found port in file:///Users/rschmidt/macports/dports/devel/libsdl_net DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libsdl_net 1.2.7_0 exists in the ports tree DEBUG: libsdl_net 1.2.7_0 +universal is the latest installed DEBUG: libsdl_net 1.2.7_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /Users/rschmidt/macports/dports/devel/libsdl_net DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /Users/rschmidt/macports/dports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port libsdl_net. DEBUG: Requested variant i386 is not provided by port libsdl_net. DEBUG: Requested variant macosx is not provided by port libsdl_net. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! libsdl_net 1.2.7_0 >= libsdl_net 1.2.7_0 DEBUG: Found port in file:///Users/rschmidt/macports/dports/audio/libsdl_sound DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libsdl_sound 1.0.3_0 exists in the ports tree DEBUG: libsdl_sound 1.0.3_0 +universal is the latest installed DEBUG: libsdl_sound 1.0.3_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /Users/rschmidt/macports/dports/audio/libsdl_sound DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /Users/rschmidt/macports/dports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port libsdl_sound. DEBUG: Requested variant i386 is not provided by port libsdl_sound. DEBUG: Requested variant macosx is not provided by port libsdl_sound. DEBUG: Executing variant universal provides universal DEBUG: Found port in file:///Users/rschmidt/macports/dports/multimedia/smpeg DEBUG: epoch: in tree: 0 installed: 0 DEBUG: smpeg 0.4.4_8 exists in the ports tree DEBUG: smpeg 0.4.4_8 +universal is the latest installed DEBUG: smpeg 0.4.4_8 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /Users/rschmidt/macports/dports/multimedia/smpeg DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /Users/rschmidt/macports/dports/_resources/port1.0/variant_descriptions.conf DEBUG: adding the default universal variant DEBUG: Requested variant darwin is not provided by port smpeg. DEBUG: Requested variant i386 is not provided by port smpeg. DEBUG: Requested variant macosx is not provided by port smpeg. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! smpeg 0.4.4_8 >= smpeg 0.4.4_8 DEBUG: Found port in file:///Users/rschmidt/macports/dports/audio/libvorbis DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libvorbis 1.2.3_0 exists in the ports tree DEBUG: libvorbis 1.2.3_0 +universal is the latest installed DEBUG: libvorbis 1.2.3_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /Users/rschmidt/macports/dports/audio/libvorbis DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /Users/rschmidt/macports/dports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port libvorbis. DEBUG: Requested variant i386 is not provided by port libvorbis. DEBUG: Requested variant macosx is not provided by port libvorbis. DEBUG: Executing variant universal provides universal DEBUG: Found port in file:///Users/rschmidt/macports/dports/multimedia/libogg DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libogg 1.1.4_0 exists in the ports tree DEBUG: libogg 1.1.4_0 +universal is the latest installed DEBUG: libogg 1.1.4_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /Users/rschmidt/macports/dports/multimedia/libogg DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /Users/rschmidt/macports/dports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port libogg. DEBUG: Requested variant i386 is not provided by port libogg. DEBUG: Requested variant macosx is not provided by port libogg. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! libogg 1.1.4_0 >= libogg 1.1.4_0 DEBUG: No need to upgrade! libvorbis 1.2.3_0 >= libvorbis 1.2.3_0 DEBUG: Found port in file:///Users/rschmidt/macports/dports/audio/libmodplug DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libmodplug 0.8.7_0 exists in the ports tree DEBUG: libmodplug 0.8.7_0 +universal is the latest installed DEBUG: libmodplug 0.8.7_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /Users/rschmidt/macports/dports/audio/libmodplug DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /Users/rschmidt/macports/dports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port libmodplug. DEBUG: Requested variant i386 is not provided by port libmodplug. DEBUG: Requested variant macosx is not provided by port libmodplug. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! libmodplug 0.8.7_0 >= libmodplug 0.8.7_0 DEBUG: Found port in file:///Users/rschmidt/macports/dports/audio/flac DEBUG: epoch: in tree: 0 installed: 0 DEBUG: flac 1.2.1_0 exists in the ports tree DEBUG: flac 1.2.1_0 +darwin_i386+universal is the latest installed DEBUG: flac 1.2.1_0 +darwin_i386+universal is active DEBUG: Merging existing variants darwin_i386 universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /Users/rschmidt/macports/dports/audio/flac DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /Users/rschmidt/macports/dports/_resources/port1.0/variant_descriptions.conf DEBUG: adding the default universal variant DEBUG: Requested variant darwin is not provided by port flac. DEBUG: Requested variant i386 is not provided by port flac. DEBUG: Requested variant macosx is not provided by port flac. DEBUG: Executing variant darwin_i386 provides darwin_i386 DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! flac 1.2.1_0 >= flac 1.2.1_0 DEBUG: Found port in file:///Users/rschmidt/macports/dports/audio/speex DEBUG: speex is *not* installed by MacPorts DEBUG: Searching for dependency: speex DEBUG: Didn't find receipt, going to depspec regex for: speex DEBUG: Found Dependency: path: /ppc-i386-10.5-mp/lib filename: libspeex.dylib regex: ^libspeex.dylib$ DEBUG: speex not installed, soft dependency satisfied DEBUG: Found port in file:///Users/rschmidt/macports/dports/devel/physfs DEBUG: epoch: in tree: 0 installed: 0 DEBUG: physfs 1.0.2_0 exists in the ports tree DEBUG: physfs 1.0.2_0 +darwin_9+universal is the latest installed DEBUG: physfs 1.0.2_0 +darwin_9+universal is active DEBUG: Merging existing variants darwin_9 universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /Users/rschmidt/macports/dports/devel/physfs DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /Users/rschmidt/macports/dports/_resources/port1.0/variant_descriptions.conf DEBUG: adding the default universal variant DEBUG: Requested variant darwin is not provided by port physfs. DEBUG: Requested variant i386 is not provided by port physfs. DEBUG: Requested variant macosx is not provided by port physfs. DEBUG: Executing variant darwin_9 provides darwin_9 DEBUG: Executing variant universal provides universal DEBUG: Found port in file:///Users/rschmidt/macports/dports/devel/readline DEBUG: epoch: in tree: 0 installed: 0 DEBUG: readline 6.0.000_1 exists in the ports tree DEBUG: readline 6.0.000_1 +darwin+universal is the latest installed DEBUG: readline 6.0.000_1 +darwin+universal is active DEBUG: Merging existing variants darwin universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /Users/rschmidt/macports/dports/devel/readline DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /Users/rschmidt/macports/dports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /Users/rschmidt/macports/dports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant i386 is not provided by port readline. DEBUG: Requested variant macosx is not provided by port readline. DEBUG: Executing variant universal provides universal DEBUG: Executing variant darwin provides darwin DEBUG: No need to upgrade! readline 6.0.000_1 >= readline 6.0.000_1 DEBUG: No need to upgrade! physfs 1.0.2_0 >= physfs 1.0.2_0 DEBUG: No need to upgrade! libsdl_sound 1.0.3_0 >= libsdl_sound 1.0.3_0 DEBUG: Found port in file:///Users/rschmidt/macports/dports/graphics/libpng DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libpng 1.2.38_0 exists in the ports tree DEBUG: libpng 1.2.38_0 +universal is the latest installed DEBUG: libpng 1.2.38_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /Users/rschmidt/macports/dports/graphics/libpng DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /Users/rschmidt/macports/dports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /Users/rschmidt/macports/dports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port libpng. DEBUG: Requested variant i386 is not provided by port libpng. DEBUG: Requested variant macosx is not provided by port libpng. DEBUG: Executing variant universal provides universal DEBUG: Found port in file:///Users/rschmidt/macports/dports/archivers/zlib DEBUG: epoch: in tree: 0 installed: 0 DEBUG: zlib 1.2.3_3 exists in the ports tree DEBUG: zlib 1.2.3_3 +universal is the latest installed DEBUG: zlib 1.2.3_3 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /Users/rschmidt/macports/dports/archivers/zlib DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /Users/rschmidt/macports/dports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port zlib. DEBUG: Requested variant i386 is not provided by port zlib. DEBUG: Requested variant macosx is not provided by port zlib. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! zlib 1.2.3_3 >= zlib 1.2.3_3 DEBUG: No need to upgrade! libpng 1.2.38_0 >= libpng 1.2.38_0 ---> Computing dependencies for dosbox DEBUG: Searching for dependency: libsdl DEBUG: Found Dependency: receipt exists for libsdl DEBUG: Searching for dependency: libsdl_net DEBUG: Found Dependency: receipt exists for libsdl_net DEBUG: Searching for dependency: libsdl_sound DEBUG: Found Dependency: receipt exists for libsdl_sound DEBUG: Searching for dependency: libpng DEBUG: Found Dependency: receipt exists for libpng DEBUG: Searching for dependency: zlib DEBUG: Found Dependency: receipt exists for zlib DEBUG: Executing org.macports.main (dosbox) ---> Fetching dosbox DEBUG: Executing org.macports.fetch (dosbox) ---> Verifying checksum(s) for dosbox DEBUG: Executing org.macports.checksum (dosbox) ---> Checksumming dosbox-0.72.tar.gz DEBUG: Correct (sha1) checksum for dosbox-0.72.tar.gz ---> Extracting dosbox DEBUG: Executing org.macports.extract (dosbox) ---> Extracting dosbox-0.72.tar.gz DEBUG: setting option extract.args to /ppc-i386-10.5-mp/var/macports/distfiles/dosbox/dosbox-0.72.tar.gz DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.5' DEBUG: Assembled command: 'cd "/ppc-i386-10.5-mp/var/macports/build/_Users_rschmidt_macports_dports_emulators_dosbox/work" && /usr/bin/gzip -dc /ppc-i386-10.5-mp/var/macports/distfiles/dosbox/dosbox-0.72.tar.gz | /usr/bin/gnutar --no-same-owner -xf -' DEBUG: Executing org.macports.patch (dosbox) ---> Applying patches to dosbox ---> Applying /Users/rschmidt/macports/dports/emulators/dosbox/files/patch-nullmodem.cpp DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.5' DEBUG: Assembled command: 'cd "/ppc-i386-10.5-mp/var/macports/build/_Users_rschmidt_macports_dports_emulators_dosbox/work/dosbox-0.72" && /usr/bin/patch -p0' patching file src/hardware/serialport/nullmodem.cpp Hunk #1 succeeded at 100 (offset 1 line). ---> Applying /Users/rschmidt/macports/dports/emulators/dosbox/files/patch-midi_coreaudio.h DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.5' DEBUG: Assembled command: 'cd "/ppc-i386-10.5-mp/var/macports/build/_Users_rschmidt_macports_dports_emulators_dosbox/work/dosbox-0.72" && /usr/bin/patch -p0' patching file src/gui/midi_coreaudio.h ---> Configuring dosbox DEBUG: Using compiler 'Mac OS X gcc 4.0' DEBUG: Executing org.macports.configure (dosbox) DEBUG: Environment: CFLAGS='-O2 -arch i386 -arch ppc' CPPFLAGS='-I/ppc-i386-10.5-mp/include' CXXFLAGS='-O2 -O2 -mdynamic-no-pic -arch i386 -arch ppc' MACOSX_DEPLOYMENT_TARGET='10.5' CXX='/usr/bin/g++-4.0' F90FLAGS='-O2' LDFLAGS='-L/ppc-i386-10.5-mp/lib -arch i386 -arch ppc' OBJC='/usr/bin/gcc-4.0' FCFLAGS='-O2' INSTALL='/usr/bin/install -c' OBJCFLAGS='-O2 -arch i386 -arch ppc' FFLAGS='-O2' CC='/usr/bin/gcc-4.0' DEBUG: Assembled command: 'cd "/ppc-i386-10.5-mp/var/macports/build/_Users_rschmidt_macports_dports_emulators_dosbox/work/dosbox-0.72" && ./configure --prefix=/ppc-i386-10.5-mp --disable-dependency-tracking --mandir=/ppc-i386-10.5-mp/share/man --disable-sdltest --disable-alsatest' checking build system type... i386-apple-darwin9.8.0 checking host system type... i386-apple-darwin9.8.0 checking target system type... i386-apple-darwin9.8.0 checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... no checking for mawk... no checking for nawk... no checking for awk... awk checking whether make sets $(MAKE)... yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... /usr/bin/gcc-4.0 checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether /usr/bin/gcc-4.0 accepts -g... yes checking for /usr/bin/gcc-4.0 option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of /usr/bin/gcc-4.0... none checking how to run the C preprocessor... /usr/bin/gcc-4.0 -E checking whether we are using the GNU C++ compiler... yes checking whether /usr/bin/g++-4.0 accepts -g... yes checking dependency style of /usr/bin/g++-4.0... none checking for a BSD-compatible install... /usr/bin/install -c checking for ranlib... ranlib checking for sdl-config... /ppc-i386-10.5-mp/bin/sdl-config checking for SDL - version >= 1.2.0... yes checking for an ANSI C-conforming const... yes checking for inline... inline checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for size_t... yes checking whether struct tm is in sys/time.h or time.h... time.h checking for unsigned char... yes checking size of unsigned char... 1 checking for unsigned short... yes checking size of unsigned short... 2 checking for unsigned int... yes checking size of unsigned int... 4 checking for unsigned long... yes checking size of unsigned long... 4 checking for unsigned long long... yes checking size of unsigned long long... 8 checking for int *... yes checking size of int *... 4 checking for stdlib.h... (cached) yes checking for sys/types.h... (cached) yes checking for sys/socket.h... yes checking for netinet/in.h... yes checking for pwd.h... yes checking if environ can be included... no checking if environ can be linked... yes checking for powf in -lm... yes checking if compiler allows __attribute__... yes checking if compiler allows __builtin_expect... yes checking for ALSA CFLAGS... checking for ALSA LDFLAGS... -lasound -lm -ldl -lpthread checking for libasound headers version >= 0.9.0... not present. checking for snd_ctl_open in -lasound... no checking whether byte ordering is bigendian... no checking for target cpu type... x86 compatible checking whether x86 dynamic cpu core will be enabled... yes checking whether recompiling cpu core will be enabled... no, using dynamic-x86 checking whether fpu emulation will be enabled... yes checking whether x86 assembly fpu core will be enabled... yes checking whether to enable unaligned memory access... yes checking png.h usability... yes checking png.h presence... yes checking for png.h... yes checking for png_check_sig in -lpng... yes checking SDL_net.h usability... yes checking SDL_net.h presence... yes checking for SDL_net.h... yes checking for SDLNet_Init in -lSDL_net... yes checking for main in -lGL... no checking for main in -lopengl32... no checking GL/gl.h usability... no checking GL/gl.h presence... no checking for GL/gl.h... no checking whether opengl display output will be enabled... yes checking SDL_sound.h usability... yes checking SDL_sound.h presence... yes checking for SDL_sound.h... yes checking for Sound_Init in -lSDL_sound... yes checking for Sound_Seek in -lSDL_sound... yes checking sys/mman.h usability... yes checking sys/mman.h presence... yes checking for sys/mman.h... yes checking for mprotect... yes checking for setpriority support... yes configure: creating ./config.status config.status: creating Makefile config.status: creating src/Makefile config.status: creating src/cpu/Makefile config.status: creating src/cpu/core_full/Makefile config.status: creating src/cpu/core_normal/Makefile config.status: creating src/cpu/core_dyn_x86/Makefile config.status: creating src/cpu/core_dynrec/Makefile config.status: creating src/debug/Makefile config.status: creating src/dos/Makefile config.status: creating src/fpu/Makefile config.status: creating src/gui/Makefile config.status: creating src/hardware/Makefile config.status: creating src/hardware/serialport/Makefile config.status: creating src/ints/Makefile config.status: creating src/libs/Makefile config.status: creating src/libs/zmbv/Makefile config.status: creating src/misc/Makefile config.status: creating src/shell/Makefile config.status: creating src/platform/Makefile config.status: creating src/platform/visualc/Makefile config.status: creating visualc_net/Makefile config.status: creating include/Makefile config.status: creating docs/Makefile config.status: creating config.h config.status: executing depfiles commands ---> Building dosbox DEBUG: Executing org.macports.build (dosbox) DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.5' DEBUG: Assembled command: 'cd "/ppc-i386-10.5-mp/var/macports/build/_Users_rschmidt_macports_dports_emulators_dosbox/work/dosbox-0.72" && /usr/bin/nice -n 10 /usr/bin/make -j2 all' /usr/bin/make all-recursive Making all in src Making all in cpu Making all in core_full make[4]: Nothing to be done for `all'. Making all in core_normal make[4]: Nothing to be done for `all'. Making all in core_dyn_x86 make[4]: Nothing to be done for `all'. Making all in core_dynrec make[4]: Nothing to be done for `all'. /usr/bin/g++-4.0 -DHAVE_CONFIG_H -I. -I. -I../.. -I../../include -I/ppc-i386-10.5-mp/include -I/ppc-i386-10.5-mp/include/SDL -D_GNU_SOURCE=1 -D_THREAD_SAFE -O2 -O2 -mdynamic-no-pic -arch i386 -arch ppc -c -o callback.o `test -f 'callback.cpp' || echo './'`callback.cpp /usr/bin/g++-4.0 -DHAVE_CONFIG_H -I. -I. -I../.. -I../../include -I/ppc-i386-10.5-mp/include -I/ppc-i386-10.5-mp/include/SDL -D_GNU_SOURCE=1 -D_THREAD_SAFE -O2 -O2 -mdynamic-no-pic -arch i386 -arch ppc -c -o cpu.o `test -f 'cpu.cpp' || echo './'`cpu.cpp /usr/bin/g++-4.0 -DHAVE_CONFIG_H -I. -I. -I../.. -I../../include -I/ppc-i386-10.5-mp/include -I/ppc-i386-10.5-mp/include/SDL -D_GNU_SOURCE=1 -D_THREAD_SAFE -O2 -O2 -mdynamic-no-pic -arch i386 -arch ppc -c -o flags.o `test -f 'flags.cpp' || echo './'`flags.cpp /usr/bin/g++-4.0 -DHAVE_CONFIG_H -I. -I. -I../.. -I../../include -I/ppc-i386-10.5-mp/include -I/ppc-i386-10.5-mp/include/SDL -D_GNU_SOURCE=1 -D_THREAD_SAFE -O2 -O2 -mdynamic-no-pic -arch i386 -arch ppc -c -o modrm.o `test -f 'modrm.cpp' || echo './'`modrm.cpp /usr/bin/g++-4.0 -DHAVE_CONFIG_H -I. -I. -I../.. -I../../include -I/ppc-i386-10.5-mp/include -I/ppc-i386-10.5-mp/include/SDL -D_GNU_SOURCE=1 -D_THREAD_SAFE -O2 -O2 -mdynamic-no-pic -arch i386 -arch ppc -c -o core_full.o `test -f 'core_full.cpp' || echo './'`core_full.cpp /usr/bin/g++-4.0 -DHAVE_CONFIG_H -I. -I. -I../.. -I../../include -I/ppc-i386-10.5-mp/include -I/ppc-i386-10.5-mp/include/SDL -D_GNU_SOURCE=1 -D_THREAD_SAFE -O2 -O2 -mdynamic-no-pic -arch i386 -arch ppc -c -o paging.o `test -f 'paging.cpp' || echo './'`paging.cpp /usr/bin/g++-4.0 -DHAVE_CONFIG_H -I. -I. -I../.. -I../../include -I/ppc-i386-10.5-mp/include -I/ppc-i386-10.5-mp/include/SDL -D_GNU_SOURCE=1 -D_THREAD_SAFE -O2 -O2 -mdynamic-no-pic -arch i386 -arch ppc -c -o core_normal.o `test -f 'core_normal.cpp' || echo './'`core_normal.cpp /usr/bin/g++-4.0 -DHAVE_CONFIG_H -I. -I. -I../.. -I../../include -I/ppc-i386-10.5-mp/include -I/ppc-i386-10.5-mp/include/SDL -D_GNU_SOURCE=1 -D_THREAD_SAFE -O2 -O2 -mdynamic-no-pic -arch i386 -arch ppc -c -o core_simple.o `test -f 'core_simple.cpp' || echo './'`core_simple.cpp /usr/bin/g++-4.0 -DHAVE_CONFIG_H -I. -I. -I../.. -I../../include -I/ppc-i386-10.5-mp/include -I/ppc-i386-10.5-mp/include/SDL -D_GNU_SOURCE=1 -D_THREAD_SAFE -O2 -O2 -mdynamic-no-pic -arch i386 -arch ppc -c -o core_dyn_x86.o `test -f 'core_dyn_x86.cpp' || echo './'`core_dyn_x86.cpp core_dyn_x86/../../fpu/fpu_instructions_x86.h: In function 'void FPU_FLD_F32(PhysPt, Bitu)': core_dyn_x86/../../fpu/fpu_instructions_x86.h:1136: error: unknown register name 'eax' in 'asm' core_dyn_x86/../../fpu/fpu_instructions_x86.h: In function 'void FPU_FLD_F32_EA(PhysPt)': core_dyn_x86/../../fpu/fpu_instructions_x86.h:1141: error: unknown register name 'eax' in 'asm' core_dyn_x86/../../fpu/fpu_instructions_x86.h: In function 'void FPU_FLD_F64(PhysPt, Bitu)': core_dyn_x86/../../fpu/fpu_instructions_x86.h:1147: error: unknown register name 'eax' in 'asm' core_dyn_x86/../../fpu/fpu_instructions_x86.h: In function 'void FPU_FLD_F64_EA(PhysPt)': core_dyn_x86/../../fpu/fpu_instructions_x86.h:1153: error: unknown register name 'eax' in 'asm' core_dyn_x86/../../fpu/fpu_instructions_x86.h: In function 'void FPU_FLD_I16(PhysPt, Bitu)': core_dyn_x86/../../fpu/fpu_instructions_x86.h:1165: error: unknown register name 'eax' in 'asm' core_dyn_x86/../../fpu/fpu_instructions_x86.h: In function 'void FPU_FLD_I16_EA(PhysPt)': core_dyn_x86/../../fpu/fpu_instructions_x86.h:1170: error: unknown register name 'eax' in 'asm' core_dyn_x86/../../fpu/fpu_instructions_x86.h: In function 'void FPU_FLD_I32(PhysPt, Bitu)': core_dyn_x86/../../fpu/fpu_instructions_x86.h:1175: error: unknown register name 'eax' in 'asm' core_dyn_x86/../../fpu/fpu_instructions_x86.h: In function 'void FPU_FLD_I32_EA(PhysPt)': core_dyn_x86/../../fpu/fpu_instructions_x86.h:1180: error: unknown register name 'eax' in 'asm' core_dyn_x86/../../fpu/fpu_instructions_x86.h: In function 'void FPU_FLD_I64(PhysPt, Bitu)': core_dyn_x86/../../fpu/fpu_instructions_x86.h:1186: error: unknown register name 'eax' in 'asm' core_dyn_x86/../../fpu/fpu_instructions_x86.h: In function 'void FPU_FBLD(PhysPt, Bitu)': core_dyn_x86/../../fpu/fpu_instructions_x86.h:1193: error: unknown register name 'eax' in 'asm' core_dyn_x86/../../fpu/fpu_instructions_x86.h: In function 'void FPU_FST_F32(PhysPt)': core_dyn_x86/../../fpu/fpu_instructions_x86.h:1197: error: unknown register name 'eax' in 'asm' core_dyn_x86/../../fpu/fpu_instructions_x86.h: In function 'void FPU_FST_F64(PhysPt)': core_dyn_x86/../../fpu/fpu_instructions_x86.h:1202: error: unknown register name 'eax' in 'asm' core_dyn_x86/../../fpu/fpu_instructions_x86.h: In function 'void FPU_FST_I16(PhysPt)': core_dyn_x86/../../fpu/fpu_instructions_x86.h:1215: error: unknown register name 'eax' in 'asm' core_dyn_x86/../../fpu/fpu_instructions_x86.h: In function 'void FPU_FST_I32(PhysPt)': core_dyn_x86/../../fpu/fpu_instructions_x86.h:1220: error: unknown register name 'eax' in 'asm' core_dyn_x86/../../fpu/fpu_instructions_x86.h: In function 'void FPU_FST_I64(PhysPt)': core_dyn_x86/../../fpu/fpu_instructions_x86.h:1225: error: unknown register name 'eax' in 'asm' core_dyn_x86/../../fpu/fpu_instructions_x86.h: In function 'void FPU_FBST(PhysPt)': core_dyn_x86/../../fpu/fpu_instructions_x86.h:1231: error: unknown register name 'eax' in 'asm' core_dyn_x86/../../fpu/fpu_instructions_x86.h: In function 'void FPU_FSINCOS()': core_dyn_x86/../../fpu/fpu_instructions_x86.h:1243: error: unknown register name 'eax' in 'asm' core_dyn_x86/../../fpu/fpu_instructions_x86.h: In function 'void FPU_FPATAN()': core_dyn_x86/../../fpu/fpu_instructions_x86.h:1255: error: unknown register name 'eax' in 'asm' core_dyn_x86/../../fpu/fpu_instructions_x86.h: In function 'void FPU_FPTAN()': core_dyn_x86/../../fpu/fpu_instructions_x86.h:1259: error: unknown register name 'eax' in 'asm' core_dyn_x86/../../fpu/fpu_instructions_x86.h: In function 'void FPU_FPREM()': core_dyn_x86/../../fpu/fpu_instructions_x86.h:1357: error: unknown register name 'eax' in 'asm' core_dyn_x86/../../fpu/fpu_instructions_x86.h: In function 'void FPU_FPREM1()': core_dyn_x86/../../fpu/fpu_instructions_x86.h:1361: error: unknown register name 'eax' in 'asm' core_dyn_x86/../../fpu/fpu_instructions_x86.h: In function 'void FPU_FYL2X()': core_dyn_x86/../../fpu/fpu_instructions_x86.h:1378: error: unknown register name 'eax' in 'asm' core_dyn_x86/../../fpu/fpu_instructions_x86.h: In function 'void FPU_FYL2XP1()': core_dyn_x86/../../fpu/fpu_instructions_x86.h:1382: error: unknown register name 'eax' in 'asm' core_dyn_x86/../../fpu/fpu_instructions_x86.h: In function 'void FPU_FSCALE()': core_dyn_x86/../../fpu/fpu_instructions_x86.h:1386: error: unknown register name 'eax' in 'asm' core_dyn_x86/../../fpu/fpu_instructions_x86.h: In function 'void FPU_FXTRACT()': core_dyn_x86/../../fpu/fpu_instructions_x86.h:1447: error: unknown register name 'eax' in 'asm' lipo: can't figure out the architecture type of: /var/tmp//cc8v3Sq5.out make[4]: *** [core_dyn_x86.o] Error 1 make[4]: *** Waiting for unfinished jobs.... make[3]: *** [all-recursive] Error 1 make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2