mactineke:~ verga$ sudo port -d install py26-spyder DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-spyder DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-spyder DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl DEBUG: not using configure, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port py26-spyder. DEBUG: Requested variant i386 is not provided by port py26-spyder. DEBUG: Requested variant macosx is not provided by port py26-spyder. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python26 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: python26 2.6.4_0 exists in the ports tree DEBUG: python26 2.6.4_0 +darwin is the latest installed DEBUG: python26 2.6.4_0 +darwin is active DEBUG: Merging existing variants darwin into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python26 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant i386 is not provided by port python26. DEBUG: Requested variant macosx is not provided by port python26. DEBUG: Executing variant darwin provides darwin DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gettext 0.17_4 exists in the ports tree DEBUG: gettext 0.17_4 is the latest installed DEBUG: gettext 0.17_4 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port gettext. DEBUG: Requested variant i386 is not provided by port gettext. DEBUG: Requested variant macosx is not provided by port gettext. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libiconv 1.13.1_0 exists in the ports tree DEBUG: libiconv 1.13.1_0 is the latest installed DEBUG: libiconv 1.13.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port libiconv. DEBUG: Requested variant i386 is not provided by port libiconv. DEBUG: Requested variant macosx is not provided by port libiconv. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gperf 3.0.4_0 exists in the ports tree DEBUG: gperf 3.0.4_0 is the latest installed DEBUG: gperf 3.0.4_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port gperf. DEBUG: Requested variant i386 is not provided by port gperf. DEBUG: Requested variant macosx is not provided by port gperf. DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0 DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses DEBUG: epoch: in tree: 0 installed: 0 DEBUG: ncurses 5.7_0 exists in the ports tree DEBUG: ncurses 5.7_0 +darwin_10 is the latest installed DEBUG: ncurses 5.7_0 +darwin_10 is active DEBUG: Merging existing variants darwin_10 into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port ncurses. DEBUG: Requested variant i386 is not provided by port ncurses. DEBUG: Requested variant macosx is not provided by port ncurses. DEBUG: Executing variant darwin_10 provides darwin_10 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw DEBUG: epoch: in tree: 0 installed: 0 DEBUG: ncursesw 5.7_0 exists in the ports tree DEBUG: ncursesw 5.7_0 +darwin_10 is the latest installed DEBUG: ncursesw 5.7_0 +darwin_10 is active DEBUG: Merging existing variants darwin_10 into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port ncursesw. DEBUG: Requested variant i386 is not provided by port ncursesw. DEBUG: Requested variant macosx is not provided by port ncursesw. DEBUG: Executing variant darwin_10 provides darwin_10 DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0 DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat DEBUG: epoch: in tree: 0 installed: 0 DEBUG: expat 2.0.1_0 exists in the ports tree DEBUG: expat 2.0.1_0 is the latest installed DEBUG: expat 2.0.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port expat. DEBUG: Requested variant i386 is not provided by port expat. DEBUG: Requested variant macosx is not provided by port expat. DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0 DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib DEBUG: epoch: in tree: 0 installed: 0 DEBUG: zlib 1.2.3_4 exists in the ports tree DEBUG: zlib 1.2.3_4 is the latest installed DEBUG: zlib 1.2.3_4 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port zlib. DEBUG: Requested variant i386 is not provided by port zlib. DEBUG: Requested variant macosx is not provided by port zlib. DEBUG: No need to upgrade! zlib 1.2.3_4 >= zlib 1.2.3_4 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl DEBUG: epoch: in tree: 1 installed: 1 DEBUG: openssl 0.9.8l_0 exists in the ports tree DEBUG: openssl 0.9.8l_0 +darwin is the latest installed DEBUG: openssl 0.9.8l_0 +darwin is active DEBUG: Merging existing variants darwin into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant i386 is not provided by port openssl. DEBUG: Requested variant macosx is not provided by port openssl. DEBUG: Executing variant darwin provides darwin DEBUG: No need to upgrade! openssl 0.9.8l_0 >= openssl 0.9.8l_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/tk DEBUG: epoch: in tree: 0 installed: 0 DEBUG: tk 8.5.8_0 exists in the ports tree DEBUG: tk 8.5.8_0 +darwin is the latest installed DEBUG: tk 8.5.8_0 +darwin is active DEBUG: Merging existing variants darwin into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/tk DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: adding the default universal variant DEBUG: Requested variant i386 is not provided by port tk. DEBUG: Requested variant macosx is not provided by port tk. DEBUG: Executing variant darwin provides darwin DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig DEBUG: epoch: in tree: 0 installed: 0 DEBUG: pkgconfig 0.23_1 exists in the ports tree DEBUG: pkgconfig 0.23_1 is the latest installed DEBUG: pkgconfig 0.23_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port pkgconfig. DEBUG: Requested variant i386 is not provided by port pkgconfig. DEBUG: Requested variant macosx is not provided by port pkgconfig. DEBUG: No need to upgrade! pkgconfig 0.23_1 >= pkgconfig 0.23_1 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/tcl DEBUG: epoch: in tree: 0 installed: 0 DEBUG: tcl 8.5.8_0 exists in the ports tree DEBUG: tcl 8.5.8_0 +darwin is the latest installed DEBUG: tcl 8.5.8_0 +darwin is active DEBUG: Merging existing variants darwin into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/tcl DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: adding the default universal variant DEBUG: Requested variant i386 is not provided by port tcl. DEBUG: Requested variant macosx is not provided by port tcl. DEBUG: Executing variant darwin provides darwin DEBUG: No need to upgrade! tcl 8.5.8_0 >= tcl 8.5.8_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: Xft2 2.1.14_0 exists in the ports tree DEBUG: Xft2 2.1.14_0 is the latest installed DEBUG: Xft2 2.1.14_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port Xft2. DEBUG: Requested variant i386 is not provided by port Xft2. DEBUG: Requested variant macosx is not provided by port Xft2. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xrender 0.9.5_0 exists in the ports tree DEBUG: xrender 0.9.5_0 is the latest installed DEBUG: xrender 0.9.5_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xrender. DEBUG: Requested variant i386 is not provided by port xrender. DEBUG: Requested variant macosx is not provided by port xrender. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libX11 1.3.3_0 exists in the ports tree DEBUG: xorg-libX11 1.3.3_0 is the latest installed DEBUG: xorg-libX11 1.3.3_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libX11. DEBUG: Requested variant i386 is not provided by port xorg-libX11. DEBUG: Requested variant macosx is not provided by port xorg-libX11. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-util-macros DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-util-macros 1.5.0_0 exists in the ports tree DEBUG: xorg-util-macros 1.5.0_0 is the latest installed DEBUG: xorg-util-macros 1.5.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-util-macros DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-util-macros. DEBUG: Requested variant i386 is not provided by port xorg-util-macros. DEBUG: Requested variant macosx is not provided by port xorg-util-macros. DEBUG: No need to upgrade! xorg-util-macros 1.5.0_0 >= xorg-util-macros 1.5.0_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xtrans DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-xtrans 1.2.5_0 exists in the ports tree DEBUG: xorg-xtrans 1.2.5_0 is the latest installed DEBUG: xorg-xtrans 1.2.5_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xtrans DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-xtrans. DEBUG: Requested variant i386 is not provided by port xorg-xtrans. DEBUG: Requested variant macosx is not provided by port xorg-xtrans. DEBUG: No need to upgrade! xorg-xtrans 1.2.5_0 >= xorg-xtrans 1.2.5_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-bigreqsproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-bigreqsproto 1.1.0_0 exists in the ports tree DEBUG: xorg-bigreqsproto 1.1.0_0 is the latest installed DEBUG: xorg-bigreqsproto 1.1.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-bigreqsproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-bigreqsproto. DEBUG: Requested variant i386 is not provided by port xorg-bigreqsproto. DEBUG: Requested variant macosx is not provided by port xorg-bigreqsproto. DEBUG: No need to upgrade! xorg-bigreqsproto 1.1.0_0 >= xorg-bigreqsproto 1.1.0_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcmiscproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-xcmiscproto 1.2.0_0 exists in the ports tree DEBUG: xorg-xcmiscproto 1.2.0_0 is the latest installed DEBUG: xorg-xcmiscproto 1.2.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcmiscproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-xcmiscproto. DEBUG: Requested variant i386 is not provided by port xorg-xcmiscproto. DEBUG: Requested variant macosx is not provided by port xorg-xcmiscproto. DEBUG: No need to upgrade! xorg-xcmiscproto 1.2.0_0 >= xorg-xcmiscproto 1.2.0_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-xextproto 7.1.1_0 exists in the ports tree DEBUG: xorg-xextproto 7.1.1_0 is the latest installed DEBUG: xorg-xextproto 7.1.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-xextproto. DEBUG: Requested variant i386 is not provided by port xorg-xextproto. DEBUG: Requested variant macosx is not provided by port xorg-xextproto. DEBUG: No need to upgrade! xorg-xextproto 7.1.1_0 >= xorg-xextproto 7.1.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xf86bigfontproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-xf86bigfontproto 1.2.0_0 exists in the ports tree DEBUG: xorg-xf86bigfontproto 1.2.0_0 is the latest installed DEBUG: xorg-xf86bigfontproto 1.2.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xf86bigfontproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-xf86bigfontproto. DEBUG: Requested variant i386 is not provided by port xorg-xf86bigfontproto. DEBUG: Requested variant macosx is not provided by port xorg-xf86bigfontproto. DEBUG: No need to upgrade! xorg-xf86bigfontproto 1.2.0_0 >= xorg-xf86bigfontproto 1.2.0_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-inputproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-inputproto 2.0_0 exists in the ports tree DEBUG: xorg-inputproto 2.0_0 is the latest installed DEBUG: xorg-inputproto 2.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-inputproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-inputproto. DEBUG: Requested variant i386 is not provided by port xorg-inputproto. DEBUG: Requested variant macosx is not provided by port xorg-inputproto. DEBUG: No need to upgrade! xorg-inputproto 2.0_0 >= xorg-inputproto 2.0_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXdmcp 1.0.3_0 exists in the ports tree DEBUG: xorg-libXdmcp 1.0.3_0 is the latest installed DEBUG: xorg-libXdmcp 1.0.3_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXdmcp. DEBUG: Requested variant i386 is not provided by port xorg-libXdmcp. DEBUG: Requested variant macosx is not provided by port xorg-libXdmcp. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-xproto 7.0.16_0 exists in the ports tree DEBUG: xorg-xproto 7.0.16_0 is the latest installed DEBUG: xorg-xproto 7.0.16_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-xproto. DEBUG: Requested variant i386 is not provided by port xorg-xproto. DEBUG: Requested variant macosx is not provided by port xorg-xproto. DEBUG: No need to upgrade! xorg-xproto 7.0.16_0 >= xorg-xproto 7.0.16_0 DEBUG: No need to upgrade! xorg-libXdmcp 1.0.3_0 >= xorg-libXdmcp 1.0.3_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXau 1.0.5_0 exists in the ports tree DEBUG: xorg-libXau 1.0.5_0 is the latest installed DEBUG: xorg-libXau 1.0.5_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXau. DEBUG: Requested variant i386 is not provided by port xorg-libXau. DEBUG: Requested variant macosx is not provided by port xorg-libXau. DEBUG: No need to upgrade! xorg-libXau 1.0.5_0 >= xorg-libXau 1.0.5_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-kbproto 1.0.4_0 exists in the ports tree DEBUG: xorg-kbproto 1.0.4_0 is the latest installed DEBUG: xorg-kbproto 1.0.4_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-kbproto. DEBUG: Requested variant i386 is not provided by port xorg-kbproto. DEBUG: Requested variant macosx is not provided by port xorg-kbproto. DEBUG: No need to upgrade! xorg-kbproto 1.0.4_0 >= xorg-kbproto 1.0.4_0 DEBUG: No need to upgrade! xorg-libX11 1.3.3_0 >= xorg-libX11 1.3.3_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-renderproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-renderproto 0.11_0 exists in the ports tree DEBUG: xorg-renderproto 0.11_0 is the latest installed DEBUG: xorg-renderproto 0.11_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-renderproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-renderproto. DEBUG: Requested variant i386 is not provided by port xorg-renderproto. DEBUG: Requested variant macosx is not provided by port xorg-renderproto. DEBUG: No need to upgrade! xorg-renderproto 0.11_0 >= xorg-renderproto 0.11_0 DEBUG: No need to upgrade! xrender 0.9.5_0 >= xrender 0.9.5_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype DEBUG: epoch: in tree: 0 installed: 0 DEBUG: freetype 2.3.11_1 exists in the ports tree DEBUG: freetype 2.3.11_1 +macosx is the latest installed DEBUG: freetype 2.3.11_1 +macosx is active DEBUG: Merging existing variants macosx into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port freetype. DEBUG: Requested variant i386 is not provided by port freetype. DEBUG: Executing variant macosx provides macosx DEBUG: No need to upgrade! freetype 2.3.11_1 >= freetype 2.3.11_1 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig DEBUG: epoch: in tree: 0 installed: 0 DEBUG: fontconfig 2.8.0_0 exists in the ports tree DEBUG: fontconfig 2.8.0_0 +macosx is the latest installed DEBUG: fontconfig 2.8.0_0 +macosx is active DEBUG: Merging existing variants macosx into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port fontconfig. DEBUG: Requested variant i386 is not provided by port fontconfig. DEBUG: Executing variant macosx provides macosx DEBUG: No need to upgrade! fontconfig 2.8.0_0 >= fontconfig 2.8.0_0 DEBUG: No need to upgrade! Xft2 2.1.14_0 >= Xft2 2.1.14_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXScrnSaver DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXScrnSaver 1.2.0_0 exists in the ports tree DEBUG: xorg-libXScrnSaver 1.2.0_0 is the latest installed DEBUG: xorg-libXScrnSaver 1.2.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXScrnSaver DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXScrnSaver. DEBUG: Requested variant i386 is not provided by port xorg-libXScrnSaver. DEBUG: Requested variant macosx is not provided by port xorg-libXScrnSaver. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXext DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXext 1.1.1_0 exists in the ports tree DEBUG: xorg-libXext 1.1.1_0 is the latest installed DEBUG: xorg-libXext 1.1.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXext DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXext. DEBUG: Requested variant i386 is not provided by port xorg-libXext. DEBUG: Requested variant macosx is not provided by port xorg-libXext. DEBUG: No need to upgrade! xorg-libXext 1.1.1_0 >= xorg-libXext 1.1.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-scrnsaverproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-scrnsaverproto 1.2.0_0 exists in the ports tree DEBUG: xorg-scrnsaverproto 1.2.0_0 is the latest installed DEBUG: xorg-scrnsaverproto 1.2.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-scrnsaverproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-scrnsaverproto. DEBUG: Requested variant i386 is not provided by port xorg-scrnsaverproto. DEBUG: Requested variant macosx is not provided by port xorg-scrnsaverproto. DEBUG: No need to upgrade! xorg-scrnsaverproto 1.2.0_0 >= xorg-scrnsaverproto 1.2.0_0 DEBUG: No need to upgrade! xorg-libXScrnSaver 1.2.0_0 >= xorg-libXScrnSaver 1.2.0_0 DEBUG: No need to upgrade! tk 8.5.8_0 >= tk 8.5.8_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: sqlite3 3.6.22_0 exists in the ports tree DEBUG: sqlite3 3.6.22_0 is the latest installed DEBUG: sqlite3 3.6.22_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port sqlite3. DEBUG: Requested variant i386 is not provided by port sqlite3. DEBUG: Requested variant macosx is not provided by port sqlite3. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline DEBUG: epoch: in tree: 0 installed: 0 DEBUG: readline 6.1.000_1 exists in the ports tree DEBUG: readline 6.1.000_1 +darwin is the latest installed DEBUG: readline 6.1.000_1 +darwin is active DEBUG: Merging existing variants darwin into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant i386 is not provided by port readline. DEBUG: Requested variant macosx is not provided by port readline. DEBUG: Executing variant darwin provides darwin DEBUG: No need to upgrade! readline 6.1.000_1 >= readline 6.1.000_1 DEBUG: No need to upgrade! sqlite3 3.6.22_0 >= sqlite3 3.6.22_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: db46 4.6.21_6 exists in the ports tree DEBUG: db46 4.6.21_6 is the latest installed DEBUG: db46 4.6.21_6 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port db46. DEBUG: Requested variant i386 is not provided by port db46. DEBUG: Requested variant macosx is not provided by port db46. DEBUG: No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gdbm 1.8.3_2 exists in the ports tree DEBUG: gdbm 1.8.3_2 is the latest installed DEBUG: gdbm 1.8.3_2 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port gdbm. DEBUG: Requested variant i386 is not provided by port gdbm. DEBUG: Requested variant macosx is not provided by port gdbm. DEBUG: No need to upgrade! gdbm 1.8.3_2 >= gdbm 1.8.3_2 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: bzip2 1.0.5_3 exists in the ports tree DEBUG: bzip2 1.0.5_3 +darwin is the latest installed DEBUG: bzip2 1.0.5_3 +darwin is active DEBUG: Merging existing variants darwin into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant i386 is not provided by port bzip2. DEBUG: Requested variant macosx is not provided by port bzip2. DEBUG: Executing variant darwin provides darwin DEBUG: No need to upgrade! bzip2 1.0.5_3 >= bzip2 1.0.5_3 DEBUG: No need to upgrade! python26 2.6.4_0 >= python26 2.6.4_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-pyqt4 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: py26-pyqt4 4.7_0 exists in the ports tree DEBUG: py26-pyqt4 4.7_0 is the latest installed DEBUG: py26-pyqt4 4.7_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-pyqt4 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port py26-pyqt4. DEBUG: Requested variant i386 is not provided by port py26-pyqt4. DEBUG: Requested variant macosx is not provided by port py26-pyqt4. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-sip DEBUG: epoch: in tree: 0 installed: 0 DEBUG: py26-sip 4.10_0 exists in the ports tree DEBUG: py26-sip 4.10_0 is the latest installed DEBUG: py26-sip 4.10_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-sip DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port py26-sip. DEBUG: Requested variant i386 is not provided by port py26-sip. DEBUG: Requested variant macosx is not provided by port py26-sip. DEBUG: No need to upgrade! py26-sip 4.10_0 >= py26-sip 4.10_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/aqua/qt4-mac DEBUG: epoch: in tree: 0 installed: 0 DEBUG: qt4-mac 4.6.1_0 exists in the ports tree DEBUG: qt4-mac 4.6.1_0 is the latest installed DEBUG: qt4-mac 4.6.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/aqua/qt4-mac DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port qt4-mac. DEBUG: Requested variant i386 is not provided by port qt4-mac. DEBUG: Requested variant macosx is not provided by port qt4-mac. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/dbus DEBUG: epoch: in tree: 0 installed: 0 DEBUG: dbus 1.2.16_1 exists in the ports tree DEBUG: dbus 1.2.16_1 is the latest installed DEBUG: dbus 1.2.16_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/dbus DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port dbus. DEBUG: Requested variant i386 is not provided by port dbus. DEBUG: Requested variant macosx is not provided by port dbus. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf DEBUG: epoch: in tree: 0 installed: 0 DEBUG: autoconf 2.65_1 exists in the ports tree DEBUG: autoconf 2.65_1 is the latest installed DEBUG: autoconf 2.65_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port autoconf. DEBUG: Requested variant i386 is not provided by port autoconf. DEBUG: Requested variant macosx is not provided by port autoconf. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: perl5 5.8.9_0 exists in the ports tree DEBUG: perl5 5.8.9_0 is the latest installed DEBUG: perl5 5.8.9_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port perl5. DEBUG: Requested variant i386 is not provided by port perl5. DEBUG: Requested variant macosx is not provided by port perl5. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: perl5.8 5.8.9_3 exists in the ports tree DEBUG: perl5.8 5.8.9_3 is the latest installed DEBUG: perl5.8 5.8.9_3 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port perl5.8. DEBUG: Requested variant i386 is not provided by port perl5.8. DEBUG: Requested variant macosx is not provided by port perl5.8. DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3 DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: m4 1.4.13_0 exists in the ports tree DEBUG: m4 1.4.13_0 is the latest installed DEBUG: m4 1.4.13_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port m4. DEBUG: Requested variant i386 is not provided by port m4. DEBUG: Requested variant macosx is not provided by port m4. DEBUG: No need to upgrade! m4 1.4.13_0 >= m4 1.4.13_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man DEBUG: epoch: in tree: 0 installed: 0 DEBUG: help2man 1.37.1_1 exists in the ports tree DEBUG: help2man 1.37.1_1 is the latest installed DEBUG: help2man 1.37.1_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port help2man. DEBUG: Requested variant i386 is not provided by port help2man. DEBUG: Requested variant macosx is not provided by port help2man. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext DEBUG: epoch: in tree: 0 installed: 0 DEBUG: p5-locale-gettext 1.05_2 exists in the ports tree DEBUG: p5-locale-gettext 1.05_2 is the latest installed DEBUG: p5-locale-gettext 1.05_2 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port p5-locale-gettext. DEBUG: Requested variant i386 is not provided by port p5-locale-gettext. DEBUG: Requested variant macosx is not provided by port p5-locale-gettext. DEBUG: No need to upgrade! p5-locale-gettext 1.05_2 >= p5-locale-gettext 1.05_2 DEBUG: No need to upgrade! help2man 1.37.1_1 >= help2man 1.37.1_1 DEBUG: No need to upgrade! autoconf 2.65_1 >= autoconf 2.65_1 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake DEBUG: epoch: in tree: 0 installed: 0 DEBUG: automake 1.11.1_0 exists in the ports tree DEBUG: automake 1.11.1_0 is the latest installed DEBUG: automake 1.11.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port automake. DEBUG: Requested variant i386 is not provided by port automake. DEBUG: Requested variant macosx is not provided by port automake. DEBUG: No need to upgrade! automake 1.11.1_0 >= automake 1.11.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libtool 2.2.6b_0 exists in the ports tree DEBUG: libtool 2.2.6b_0 is the latest installed DEBUG: libtool 2.2.6b_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port libtool. DEBUG: Requested variant i386 is not provided by port libtool. DEBUG: Requested variant macosx is not provided by port libtool. DEBUG: No need to upgrade! libtool 2.2.6b_0 >= libtool 2.2.6b_0 DEBUG: No need to upgrade! dbus 1.2.16_1 >= dbus 1.2.16_1 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff DEBUG: epoch: in tree: 0 installed: 0 DEBUG: tiff 3.9.2_2 exists in the ports tree DEBUG: tiff 3.9.2_2 +macosx is the latest installed DEBUG: tiff 3.9.2_2 +macosx is active DEBUG: Merging existing variants macosx into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port tiff. DEBUG: Requested variant i386 is not provided by port tiff. DEBUG: Executing variant macosx provides macosx DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg DEBUG: epoch: in tree: 0 installed: 0 DEBUG: jpeg 7_0 exists in the ports tree DEBUG: jpeg 7_0 is the latest installed DEBUG: jpeg 7_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port jpeg. DEBUG: Requested variant i386 is not provided by port jpeg. DEBUG: Requested variant macosx is not provided by port jpeg. DEBUG: No need to upgrade! jpeg 7_0 >= jpeg 7_0 DEBUG: No need to upgrade! tiff 3.9.2_2 >= tiff 3.9.2_2 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libpng 1.2.42_0 exists in the ports tree DEBUG: libpng 1.2.42_0 is the latest installed DEBUG: libpng 1.2.42_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port libpng. DEBUG: Requested variant i386 is not provided by port libpng. DEBUG: Requested variant macosx is not provided by port libpng. DEBUG: No need to upgrade! libpng 1.2.42_0 >= libpng 1.2.42_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libmng DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libmng 1.0.10_1 exists in the ports tree DEBUG: libmng 1.0.10_1 is the latest installed DEBUG: libmng 1.0.10_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libmng DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port libmng. DEBUG: Requested variant i386 is not provided by port libmng. DEBUG: Requested variant macosx is not provided by port libmng. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/lcms DEBUG: epoch: in tree: 0 installed: 0 DEBUG: lcms 1.19_1 exists in the ports tree DEBUG: lcms 1.19_1 is the latest installed DEBUG: lcms 1.19_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/lcms DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port lcms. DEBUG: Requested variant i386 is not provided by port lcms. DEBUG: Requested variant macosx is not provided by port lcms. DEBUG: No need to upgrade! lcms 1.19_1 >= lcms 1.19_1 DEBUG: No need to upgrade! libmng 1.0.10_1 >= libmng 1.0.10_1 DEBUG: No need to upgrade! qt4-mac 4.6.1_0 >= qt4-mac 4.6.1_0 DEBUG: No need to upgrade! py26-pyqt4 4.7_0 >= py26-pyqt4 4.7_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/qscintilla DEBUG: epoch: in tree: 0 installed: 0 DEBUG: qscintilla 2.4_0 exists in the ports tree DEBUG: qscintilla 2.4_0 is the latest installed DEBUG: qscintilla 2.4_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/qscintilla DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port qscintilla. DEBUG: Requested variant i386 is not provided by port qscintilla. DEBUG: Requested variant macosx is not provided by port qscintilla. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python25 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: python25 2.5.4_9 exists in the ports tree DEBUG: python25 2.5.4_9 +darwin+darwin_10+macosx is the latest installed DEBUG: python25 2.5.4_9 +darwin+darwin_10+macosx is active DEBUG: Merging existing variants darwin darwin_10 macosx into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python25 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant i386 is not provided by port python25. DEBUG: Executing variant macosx provides macosx DEBUG: Executing variant darwin provides darwin DEBUG: Executing variant darwin_10 provides darwin_10 DEBUG: No need to upgrade! python25 2.5.4_9 >= python25 2.5.4_9 DEBUG: No need to upgrade! qscintilla 2.4_0 >= qscintilla 2.4_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-lint DEBUG: epoch: in tree: 0 installed: 0 DEBUG: py26-lint 0.18.1_0 exists in the ports tree DEBUG: py26-lint 0.18.1_0 is the latest installed DEBUG: py26-lint 0.18.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-lint DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl DEBUG: not using configure, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port py26-lint. DEBUG: Requested variant i386 is not provided by port py26-lint. DEBUG: Requested variant macosx is not provided by port py26-lint. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-logilab-common DEBUG: epoch: in tree: 0 installed: 0 DEBUG: py26-logilab-common 0.45.0_0 exists in the ports tree DEBUG: py26-logilab-common 0.45.0_0 is the latest installed DEBUG: py26-logilab-common 0.45.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-logilab-common DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl DEBUG: not using configure, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port py26-logilab-common. DEBUG: Requested variant i386 is not provided by port py26-logilab-common. DEBUG: Requested variant macosx is not provided by port py26-logilab-common. DEBUG: No need to upgrade! py26-logilab-common 0.45.0_0 >= py26-logilab-common 0.45.0_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-logilab-astng DEBUG: epoch: in tree: 0 installed: 0 DEBUG: py26-logilab-astng 0.19.1_0 exists in the ports tree DEBUG: py26-logilab-astng 0.19.1_0 is the latest installed DEBUG: py26-logilab-astng 0.19.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-logilab-astng DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl DEBUG: not using configure, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port py26-logilab-astng. DEBUG: Requested variant i386 is not provided by port py26-logilab-astng. DEBUG: Requested variant macosx is not provided by port py26-logilab-astng. DEBUG: No need to upgrade! py26-logilab-astng 0.19.1_0 >= py26-logilab-astng 0.19.1_0 DEBUG: No need to upgrade! py26-lint 0.18.1_0 >= py26-lint 0.18.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-numpy DEBUG: epoch: in tree: 0 installed: 0 DEBUG: py26-numpy 1.4.0_0 exists in the ports tree DEBUG: py26-numpy 1.4.0_0 is the latest installed DEBUG: py26-numpy 1.4.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-numpy DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port py26-numpy. DEBUG: Requested variant i386 is not provided by port py26-numpy. DEBUG: Requested variant macosx is not provided by port py26-numpy. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/math/fftw-3 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: fftw-3 3.2.2_0 exists in the ports tree DEBUG: fftw-3 3.2.2_0 +i386 is the latest installed DEBUG: fftw-3 3.2.2_0 +i386 is active DEBUG: Merging existing variants i386 into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/math/fftw-3 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port fftw-3. DEBUG: Requested variant macosx is not provided by port fftw-3. DEBUG: Executing variant i386 provides i386 DEBUG: No need to upgrade! fftw-3 3.2.2_0 >= fftw-3 3.2.2_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-nose DEBUG: epoch: in tree: 0 installed: 0 DEBUG: py26-nose 0.11.1_0 exists in the ports tree DEBUG: py26-nose 0.11.1_0 is the latest installed DEBUG: py26-nose 0.11.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-nose DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl DEBUG: not using configure, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port py26-nose. DEBUG: Requested variant i386 is not provided by port py26-nose. DEBUG: Requested variant macosx is not provided by port py26-nose. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-setuptools DEBUG: epoch: in tree: 0 installed: 0 DEBUG: py26-setuptools 0.6c11_0 exists in the ports tree DEBUG: py26-setuptools 0.6c11_0 is the latest installed DEBUG: py26-setuptools 0.6c11_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-setuptools DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl DEBUG: not using configure, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port py26-setuptools. DEBUG: Requested variant i386 is not provided by port py26-setuptools. DEBUG: Requested variant macosx is not provided by port py26-setuptools. DEBUG: No need to upgrade! py26-setuptools 0.6c11_0 >= py26-setuptools 0.6c11_0 DEBUG: No need to upgrade! py26-nose 0.11.1_0 >= py26-nose 0.11.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/math/atlas DEBUG: epoch: in tree: 0 installed: 0 DEBUG: atlas 3.8.3_1 exists in the ports tree DEBUG: atlas 3.8.3_1 is the latest installed DEBUG: atlas 3.8.3_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/math/atlas DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port atlas. DEBUG: Requested variant i386 is not provided by port atlas. DEBUG: Requested variant macosx is not provided by port atlas. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/gcc43 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gcc43 4.3.4_0 exists in the ports tree DEBUG: gcc43 4.3.4_0 is the latest installed DEBUG: gcc43 4.3.4_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/gcc43 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port gcc43. DEBUG: Requested variant i386 is not provided by port gcc43. DEBUG: Requested variant macosx is not provided by port gcc43. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmp DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gmp 4.3.2_0 exists in the ports tree DEBUG: gmp 4.3.2_0 is the latest installed DEBUG: gmp 4.3.2_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmp DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port gmp. DEBUG: Requested variant i386 is not provided by port gmp. DEBUG: Requested variant macosx is not provided by port gmp. DEBUG: No need to upgrade! gmp 4.3.2_0 >= gmp 4.3.2_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/mpfr DEBUG: epoch: in tree: 0 installed: 0 DEBUG: mpfr 2.4.2-p1_0 exists in the ports tree DEBUG: mpfr 2.4.2-p1_0 is the latest installed DEBUG: mpfr 2.4.2-p1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/mpfr DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port mpfr. DEBUG: Requested variant i386 is not provided by port mpfr. DEBUG: Requested variant macosx is not provided by port mpfr. DEBUG: No need to upgrade! mpfr 2.4.2-p1_0 >= mpfr 2.4.2-p1_0 DEBUG: No need to upgrade! gcc43 4.3.4_0 >= gcc43 4.3.4_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/gzip DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gzip 1.4_0 exists in the ports tree DEBUG: gzip 1.4_0 is the latest installed DEBUG: gzip 1.4_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/gzip DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port gzip. DEBUG: Requested variant i386 is not provided by port gzip. DEBUG: Requested variant macosx is not provided by port gzip. DEBUG: No need to upgrade! gzip 1.4_0 >= gzip 1.4_0 DEBUG: No need to upgrade! atlas 3.8.3_1 >= atlas 3.8.3_1 DEBUG: No need to upgrade! py26-numpy 1.4.0_0 >= py26-numpy 1.4.0_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-scipy DEBUG: epoch: in tree: 0 installed: 0 DEBUG: py26-scipy 0.7.1_0 exists in the ports tree DEBUG: py26-scipy 0.7.1_0 +gcc43 is the latest installed DEBUG: py26-scipy 0.7.1_0 +gcc43 is active DEBUG: Merging existing variants gcc43 into variants DEBUG: new fully merged portvariants: gcc43 + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-scipy DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl DEBUG: not using configure, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port py26-scipy. DEBUG: Requested variant i386 is not provided by port py26-scipy. DEBUG: Requested variant macosx is not provided by port py26-scipy. DEBUG: Executing variant gcc43 provides gcc43 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/math/SuiteSparse DEBUG: epoch: in tree: 0 installed: 0 DEBUG: SuiteSparse 3.4.0_0 exists in the ports tree DEBUG: SuiteSparse 3.4.0_0 is the latest installed DEBUG: SuiteSparse 3.4.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/math/SuiteSparse DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: not using configure, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port SuiteSparse. DEBUG: Requested variant i386 is not provided by port SuiteSparse. DEBUG: Requested variant macosx is not provided by port SuiteSparse. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/math/metis DEBUG: epoch: in tree: 0 installed: 0 DEBUG: metis 4.0.1_0 exists in the ports tree DEBUG: metis 4.0.1_0 is the latest installed DEBUG: metis 4.0.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/math/metis DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port metis. DEBUG: Requested variant i386 is not provided by port metis. DEBUG: Requested variant macosx is not provided by port metis. DEBUG: No need to upgrade! metis 4.0.1_0 >= metis 4.0.1_0 DEBUG: No need to upgrade! SuiteSparse 3.4.0_0 >= SuiteSparse 3.4.0_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/swig-python DEBUG: epoch: in tree: 0 installed: 0 DEBUG: swig-python 1.3.40_0 exists in the ports tree DEBUG: swig-python 1.3.40_0 is the latest installed DEBUG: swig-python 1.3.40_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/swig-python DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/swigbinding-1.0.tcl DEBUG: Re-registering default for distname DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port swig-python. DEBUG: Requested variant i386 is not provided by port swig-python. DEBUG: Requested variant macosx is not provided by port swig-python. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/bison DEBUG: epoch: in tree: 0 installed: 0 DEBUG: bison 2.4.1_0 exists in the ports tree DEBUG: bison 2.4.1_0 is the latest installed DEBUG: bison 2.4.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/bison DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port bison. DEBUG: Requested variant i386 is not provided by port bison. DEBUG: Requested variant macosx is not provided by port bison. DEBUG: No need to upgrade! bison 2.4.1_0 >= bison 2.4.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/gsed DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gsed 4.2.1_0 exists in the ports tree DEBUG: gsed 4.2.1_0 is the latest installed DEBUG: gsed 4.2.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/gsed DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port gsed. DEBUG: Requested variant i386 is not provided by port gsed. DEBUG: Requested variant macosx is not provided by port gsed. DEBUG: No need to upgrade! gsed 4.2.1_0 >= gsed 4.2.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/swig DEBUG: epoch: in tree: 0 installed: 0 DEBUG: swig 1.3.40_1 exists in the ports tree DEBUG: swig 1.3.40_1 is the latest installed DEBUG: swig 1.3.40_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/swig DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port swig. DEBUG: Requested variant i386 is not provided by port swig. DEBUG: Requested variant macosx is not provided by port swig. DEBUG: No need to upgrade! swig 1.3.40_1 >= swig 1.3.40_1 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/python_select DEBUG: epoch: in tree: 0 installed: 0 DEBUG: python_select 0.3_0 exists in the ports tree DEBUG: python_select 0.3_0 +darwin_10 is the latest installed DEBUG: python_select 0.3_0 +darwin_10 is active DEBUG: Merging existing variants darwin_10 into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/python_select DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: adding the default universal variant DEBUG: Requested variant darwin is not provided by port python_select. DEBUG: Requested variant i386 is not provided by port python_select. DEBUG: Requested variant macosx is not provided by port python_select. DEBUG: Executing variant darwin_10 provides darwin_10 DEBUG: No need to upgrade! python_select 0.3_0 >= python_select 0.3_0 DEBUG: No need to upgrade! swig-python 1.3.40_0 >= swig-python 1.3.40_0 DEBUG: No need to upgrade! py26-scipy 0.7.1_0 >= py26-scipy 0.7.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-matplotlib DEBUG: epoch: in tree: 0 installed: 0 DEBUG: py26-matplotlib 0.99.1.2_0 exists in the ports tree DEBUG: py26-matplotlib 0.99.1.2_0 +tkinter is the latest installed DEBUG: py26-matplotlib 0.99.1.2_0 +tkinter is active DEBUG: Merging existing variants tkinter into variants DEBUG: new fully merged portvariants: tkinter + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-matplotlib DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl DEBUG: not using configure, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port py26-matplotlib. DEBUG: Requested variant i386 is not provided by port py26-matplotlib. DEBUG: Requested variant macosx is not provided by port py26-matplotlib. DEBUG: Executing variant tkinter provides tkinter DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-dateutil DEBUG: epoch: in tree: 0 installed: 0 DEBUG: py26-dateutil 1.4.1_0 exists in the ports tree DEBUG: py26-dateutil 1.4.1_0 is the latest installed DEBUG: py26-dateutil 1.4.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-dateutil DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port py26-dateutil. DEBUG: Requested variant i386 is not provided by port py26-dateutil. DEBUG: Requested variant macosx is not provided by port py26-dateutil. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-tz DEBUG: epoch: in tree: 0 installed: 0 DEBUG: py26-tz 2010b_0 exists in the ports tree DEBUG: py26-tz 2010b_0 is the latest installed DEBUG: py26-tz 2010b_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-tz DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl DEBUG: not using configure, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port py26-tz. DEBUG: Requested variant i386 is not provided by port py26-tz. DEBUG: Requested variant macosx is not provided by port py26-tz. DEBUG: No need to upgrade! py26-tz 2010b_0 >= py26-tz 2010b_0 DEBUG: No need to upgrade! py26-dateutil 1.4.1_0 >= py26-dateutil 1.4.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-configobj DEBUG: epoch: in tree: 0 installed: 0 DEBUG: py26-configobj 4.5.2_0 exists in the ports tree DEBUG: py26-configobj 4.5.2_0 is the latest installed DEBUG: py26-configobj 4.5.2_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-configobj DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl DEBUG: not using configure, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port py26-configobj. DEBUG: Requested variant i386 is not provided by port py26-configobj. DEBUG: Requested variant macosx is not provided by port py26-configobj. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/unzip DEBUG: unzip is *not* installed by MacPorts DEBUG: Searching for dependency: unzip DEBUG: Didn't find receipt, going to depspec regex for: unzip DEBUG: Found Dependency: path: /usr/bin filename: unzip regex: ^unzip$ DEBUG: unzip not installed, soft dependency satisfied DEBUG: No need to upgrade! py26-configobj 4.5.2_0 >= py26-configobj 4.5.2_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-pyobjc-cocoa DEBUG: epoch: in tree: 0 installed: 0 DEBUG: py26-pyobjc-cocoa 2.2_0 exists in the ports tree DEBUG: py26-pyobjc-cocoa 2.2_0 is the latest installed DEBUG: py26-pyobjc-cocoa 2.2_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-pyobjc-cocoa DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl DEBUG: not using configure, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port py26-pyobjc-cocoa. DEBUG: Requested variant i386 is not provided by port py26-pyobjc-cocoa. DEBUG: Requested variant macosx is not provided by port py26-pyobjc-cocoa. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-pyobjc2-cocoa DEBUG: epoch: in tree: 0 installed: 0 DEBUG: py26-pyobjc2-cocoa 2.0_2 exists in the ports tree DEBUG: py26-pyobjc2-cocoa 2.0_2 is the latest installed DEBUG: py26-pyobjc2-cocoa 2.0_2 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: py26-pyobjc2-cocoa is replaced by py26-pyobjc-cocoa DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-pyobjc-cocoa DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-pyobjc DEBUG: epoch: in tree: 0 installed: 0 DEBUG: py26-pyobjc 2.2_0 exists in the ports tree DEBUG: py26-pyobjc 2.2_0 is the latest installed DEBUG: py26-pyobjc 2.2_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-pyobjc DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl DEBUG: not using configure, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port py26-pyobjc. DEBUG: Requested variant i386 is not provided by port py26-pyobjc. DEBUG: Requested variant macosx is not provided by port py26-pyobjc. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-pyobjc2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: py26-pyobjc2 2.0_2 exists in the ports tree DEBUG: py26-pyobjc2 2.0_2 is the latest installed DEBUG: py26-pyobjc2 2.0_2 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: py26-pyobjc2 is replaced by py26-pyobjc DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-pyobjc DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-py2app DEBUG: epoch: in tree: 0 installed: 0 DEBUG: py26-py2app 0.4.3_0 exists in the ports tree DEBUG: py26-py2app 0.4.3_0 is the latest installed DEBUG: py26-py2app 0.4.3_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-py2app DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl DEBUG: not using configure, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port py26-py2app. DEBUG: Requested variant i386 is not provided by port py26-py2app. DEBUG: Requested variant macosx is not provided by port py26-py2app. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-altgraph DEBUG: epoch: in tree: 0 installed: 0 DEBUG: py26-altgraph 0.6.7_0 exists in the ports tree DEBUG: py26-altgraph 0.6.7_0 is the latest installed DEBUG: py26-altgraph 0.6.7_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-altgraph DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl DEBUG: not using configure, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port py26-altgraph. DEBUG: Requested variant i386 is not provided by port py26-altgraph. DEBUG: Requested variant macosx is not provided by port py26-altgraph. DEBUG: No need to upgrade! py26-altgraph 0.6.7_0 >= py26-altgraph 0.6.7_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-macholib DEBUG: epoch: in tree: 0 installed: 0 DEBUG: py26-macholib 1.2.1_3 exists in the ports tree DEBUG: py26-macholib 1.2.1_3 is the latest installed DEBUG: py26-macholib 1.2.1_3 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-macholib DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl DEBUG: not using configure, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port py26-macholib. DEBUG: Requested variant i386 is not provided by port py26-macholib. DEBUG: Requested variant macosx is not provided by port py26-macholib. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-modulegraph DEBUG: epoch: in tree: 0 installed: 0 DEBUG: py26-modulegraph 0.7.3_0 exists in the ports tree DEBUG: py26-modulegraph 0.7.3_0 is the latest installed DEBUG: py26-modulegraph 0.7.3_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-modulegraph DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl DEBUG: not using configure, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port py26-modulegraph. DEBUG: Requested variant i386 is not provided by port py26-modulegraph. DEBUG: Requested variant macosx is not provided by port py26-modulegraph. DEBUG: No need to upgrade! py26-modulegraph 0.7.3_0 >= py26-modulegraph 0.7.3_0 DEBUG: No need to upgrade! py26-macholib 1.2.1_3 >= py26-macholib 1.2.1_3 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-bdist_mpkg DEBUG: epoch: in tree: 0 installed: 0 DEBUG: py26-bdist_mpkg 0.4.4_0 exists in the ports tree DEBUG: py26-bdist_mpkg 0.4.4_0 is the latest installed DEBUG: py26-bdist_mpkg 0.4.4_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-bdist_mpkg DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl DEBUG: not using configure, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port py26-bdist_mpkg. DEBUG: Requested variant i386 is not provided by port py26-bdist_mpkg. DEBUG: Requested variant macosx is not provided by port py26-bdist_mpkg. DEBUG: No need to upgrade! py26-bdist_mpkg 0.4.4_0 >= py26-bdist_mpkg 0.4.4_0 DEBUG: No need to upgrade! py26-py2app 0.4.3_0 >= py26-py2app 0.4.3_0 ---> Deactivating py26-pyobjc2 @2.0_2 DEBUG: deactivating file: /opt/local/share/doc/py26-pyobjc2/readme.txt DEBUG: deactivating directory: /opt/local/share/doc/py26-pyobjc2 DEBUG: /opt/local/share/doc is not empty DEBUG: /opt/local/share is not empty DEBUG: /opt/local is not empty DEBUG: /opt is not empty DEBUG: / is not empty DEBUG: Removing entry from file_map: /opt/local/share/doc/py26-pyobjc2/readme.txt DEBUG: Attempting ln -sf /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-pyobjc/work /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-pyobjc/work ---> Computing dependencies for py26-pyobjc DEBUG: Searching for dependency: py26-setuptools DEBUG: Found Dependency: receipt exists for py26-setuptools DEBUG: Searching for dependency: py26-py2app DEBUG: Found Dependency: receipt exists for py26-py2app DEBUG: Searching for dependency: py26-pyobjc2 DEBUG: Didn't find receipt, going to depspec regex for: py26-pyobjc2 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-pyobjc2 DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-pyobjc2 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: not using configure, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port py26-pyobjc2. DEBUG: Requested variant i386 is not provided by port py26-pyobjc2. DEBUG: Requested variant macosx is not provided by port py26-pyobjc2. DEBUG: Attempting ln -sf /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-pyobjc2/work /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-pyobjc2/work ---> Activating py26-pyobjc2 @2.0_2 DEBUG: activating directory: / DEBUG: activating directory: /opt DEBUG: activating directory: /opt/local DEBUG: activating directory: /opt/local/share DEBUG: activating directory: /opt/local/share/doc DEBUG: activating directory: /opt/local/share/doc/py26-pyobjc2 DEBUG: activating file: /opt/local/share/doc/py26-pyobjc2/readme.txt DEBUG: Adding file to file_map: /opt/local/share/doc/py26-pyobjc2/readme.txt for: py26-pyobjc2 DEBUG: Executing org.macports.main (py26-pyobjc2) ---> Cleaning py26-pyobjc2 DEBUG: Executing org.macports.clean (py26-pyobjc2) ---> Removing build directory for py26-pyobjc2 DEBUG: Removing directory: /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-pyobjc2 DEBUG: delete: /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-pyobjc2 DEBUG: Removing symlink: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-pyobjc2/work DEBUG: delete: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-pyobjc2/work DEBUG: Skipping activate (py26-pyobjc @2.2_0) since this port is already active DEBUG: Executing org.macports.main (py26-pyobjc) ---> Cleaning py26-pyobjc DEBUG: Executing org.macports.clean (py26-pyobjc) ---> Removing build directory for py26-pyobjc DEBUG: Removing directory: /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-pyobjc DEBUG: delete: /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-pyobjc DEBUG: Removing symlink: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-pyobjc/work DEBUG: delete: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-pyobjc/work DEBUG: No need to upgrade! py26-pyobjc 2.2_0 >= py26-pyobjc 2.2_0 ---> Deactivating py26-pyobjc2-cocoa @2.0_2 DEBUG: deactivating file: /opt/local/share/doc/py26-pyobjc2-cocoa/readme.txt DEBUG: deactivating directory: /opt/local/share/doc/py26-pyobjc2-cocoa DEBUG: /opt/local/share/doc is not empty DEBUG: /opt/local/share is not empty DEBUG: /opt/local is not empty DEBUG: /opt is not empty DEBUG: / is not empty DEBUG: Removing entry from file_map: /opt/local/share/doc/py26-pyobjc2-cocoa/readme.txt DEBUG: Attempting ln -sf /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-pyobjc-cocoa/work /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-pyobjc-cocoa/work ---> Computing dependencies for py26-pyobjc-cocoa DEBUG: Searching for dependency: py26-pyobjc DEBUG: Found Dependency: receipt exists for py26-pyobjc DEBUG: Searching for dependency: py26-pyobjc2-cocoa DEBUG: Didn't find receipt, going to depspec regex for: py26-pyobjc2-cocoa DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-pyobjc2-cocoa DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-pyobjc2-cocoa DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: not using configure, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port py26-pyobjc2-cocoa. DEBUG: Requested variant i386 is not provided by port py26-pyobjc2-cocoa. DEBUG: Requested variant macosx is not provided by port py26-pyobjc2-cocoa. DEBUG: Attempting ln -sf /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-pyobjc2-cocoa/work /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-pyobjc2-cocoa/work ---> Activating py26-pyobjc2-cocoa @2.0_2 DEBUG: activating directory: / DEBUG: activating directory: /opt DEBUG: activating directory: /opt/local DEBUG: activating directory: /opt/local/share DEBUG: activating directory: /opt/local/share/doc DEBUG: activating directory: /opt/local/share/doc/py26-pyobjc2-cocoa DEBUG: activating file: /opt/local/share/doc/py26-pyobjc2-cocoa/readme.txt DEBUG: Adding file to file_map: /opt/local/share/doc/py26-pyobjc2-cocoa/readme.txt for: py26-pyobjc2-cocoa DEBUG: Executing org.macports.main (py26-pyobjc2-cocoa) ---> Cleaning py26-pyobjc2-cocoa DEBUG: Executing org.macports.clean (py26-pyobjc2-cocoa) ---> Removing build directory for py26-pyobjc2-cocoa DEBUG: Removing directory: /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-pyobjc2-cocoa DEBUG: delete: /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-pyobjc2-cocoa DEBUG: Removing symlink: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-pyobjc2-cocoa/work DEBUG: delete: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-pyobjc2-cocoa/work DEBUG: Skipping activate (py26-pyobjc-cocoa @2.2_0) since this port is already active DEBUG: Executing org.macports.main (py26-pyobjc-cocoa) ---> Cleaning py26-pyobjc-cocoa DEBUG: Executing org.macports.clean (py26-pyobjc-cocoa) ---> Removing build directory for py26-pyobjc-cocoa DEBUG: Removing directory: /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-pyobjc-cocoa DEBUG: delete: /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-pyobjc-cocoa DEBUG: Removing symlink: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-pyobjc-cocoa/work DEBUG: delete: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-pyobjc-cocoa/work DEBUG: No need to upgrade! py26-pyobjc-cocoa 2.2_0 >= py26-pyobjc-cocoa 2.2_0 DEBUG: No need to upgrade! py26-matplotlib 0.99.1.2_0 >= py26-matplotlib 0.99.1.2_0 ---> Computing dependencies for py26-spyder DEBUG: Searching for dependency: python26 DEBUG: Found Dependency: receipt exists for python26 DEBUG: Searching for dependency: py26-pyqt4 DEBUG: Found Dependency: receipt exists for py26-pyqt4 DEBUG: Searching for dependency: qscintilla DEBUG: Found Dependency: receipt exists for qscintilla DEBUG: Searching for dependency: py26-lint DEBUG: Found Dependency: receipt exists for py26-lint DEBUG: Searching for dependency: py26-numpy DEBUG: Found Dependency: receipt exists for py26-numpy DEBUG: Searching for dependency: py26-scipy DEBUG: Found Dependency: receipt exists for py26-scipy DEBUG: Searching for dependency: py26-matplotlib DEBUG: Found Dependency: receipt exists for py26-matplotlib DEBUG: Executing org.macports.main (py26-spyder) DEBUG: Skipping completed org.macports.fetch (py26-spyder) DEBUG: Skipping completed org.macports.checksum (py26-spyder) DEBUG: Skipping completed org.macports.extract (py26-spyder) DEBUG: Skipping completed org.macports.patch (py26-spyder) DEBUG: Skipping completed org.macports.configure (py26-spyder) ---> Building py26-spyder DEBUG: Executing org.macports.build (py26-spyder) DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.6' DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-spyder/work/spyder-1.0.3" && /opt/local/Library/Frameworks/Python.framework/Versions/2.6/bin/python2.6 setup.py --no-user-cfg build' Traceback (most recent call last): File "setup.py", line 29, in from spyderlib import __version__ as version File "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-spyder/work/spyder-1.0.3/spyderlib/__init__.py", line 74, in check_pyqt_qscintilla() File "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-spyder/work/spyder-1.0.3/spyderlib/__init__.py", line 69, in check_pyqt_qscintilla tkMessageBox.showerror("Spyder", message) File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/lib-tk/tkMessageBox.py", line 89, in showerror return _show(title, message, ERROR, OK, **options) File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/lib-tk/tkMessageBox.py", line 72, in _show res = Message(**options).show() File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/lib-tk/tkCommonDialog.py", line 48, in show s = w.tk.call(self.command, *w._options(self.options)) _tkinter.TclError: bad pad value "2m": must be positive screen distance Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-spyder/work/spyder-1.0.3" && /opt/local/Library/Frameworks/Python.framework/Versions/2.6/bin/python2.6 setup.py --no-user-cfg build " returned error 1 DEBUG: Backtrace: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-spyder/work/spyder-1.0.3" && /opt/local/Library/Frameworks/Python.framework/Versions/2.6/bin/python2.6 setup.py --no-user-cfg build " returned error 1 while executing "command_exec build" (procedure "portbuild::build_main" line 9) invoked from within "$procedure $targetname" Warning: the following items did not execute (for py26-spyder): org.macports.activate org.macports.build org.macports.destroot org.macports.install Error: Status 1 encountered during processing. To report a bug, see