DEBUG: Changing to port directory: /Users/rschmidt/macports/dports/python/py-pcapy DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /Users/rschmidt/macports/dports/_resources/port1.0/group/python24-1.0.tcl DEBUG: not using configure, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port py-pcapy. DEBUG: Requested variant i386 is not provided by port py-pcapy. DEBUG: Requested variant macosx is not provided by port py-pcapy. DEBUG: Changing to port directory: /Users/rschmidt/macports/dports/python/py-pcapy DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /Users/rschmidt/macports/dports/_resources/port1.0/group/python24-1.0.tcl DEBUG: not using configure, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port py-pcapy. DEBUG: Requested variant universal is not provided by port py-pcapy. DEBUG: Requested variant i386 is not provided by port py-pcapy. DEBUG: Requested variant macosx is not provided by port py-pcapy. Portfile changed since last build; discarding previous state. DEBUG: delete: /opt/local/var/macports/build/_Users_rschmidt_macports_dports_python_py-pcapy/work DEBUG: Found port in file:///Users/rschmidt/macports/dports/lang/python24 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: python24 2.4.6_4 exists in the ports tree DEBUG: python24 2.4.6_4 +darwin+darwin_10+macosx is the latest installed DEBUG: python24 2.4.6_4 +darwin+darwin_10+macosx is active DEBUG: Merging existing variants darwin darwin_10 macosx into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /Users/rschmidt/macports/dports/lang/python24 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /Users/rschmidt/macports/dports/_resources/port1.0/group/select-1.0.tcl DEBUG: Reading variant descriptions from /Users/rschmidt/macports/dports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant i386 is not provided by port python24. DEBUG: Executing variant macosx provides macosx DEBUG: Executing variant darwin provides darwin DEBUG: Executing variant darwin_10 provides darwin_10 DEBUG: Found port in file:///Users/rschmidt/macports/dports/devel/gettext DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gettext 0.17_4 exists in the ports tree DEBUG: gettext 0.17_4 +universal is the latest installed DEBUG: gettext 0.17_4 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /Users/rschmidt/macports/dports/devel/gettext DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /Users/rschmidt/macports/dports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /Users/rschmidt/macports/dports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /Users/rschmidt/macports/dports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port gettext. DEBUG: Requested variant i386 is not provided by port gettext. DEBUG: Requested variant macosx is not provided by port gettext. DEBUG: Executing variant universal provides universal DEBUG: Found port in file:///Users/rschmidt/macports/dports/textproc/libiconv DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libiconv 1.13.1_0 exists in the ports tree DEBUG: libiconv 1.13.1_0 +universal is the latest installed DEBUG: libiconv 1.13.1_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /Users/rschmidt/macports/dports/textproc/libiconv DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /Users/rschmidt/macports/dports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /Users/rschmidt/macports/dports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port libiconv. DEBUG: Requested variant i386 is not provided by port libiconv. DEBUG: Requested variant macosx is not provided by port libiconv. DEBUG: Executing variant universal provides universal DEBUG: Found port in file:///Users/rschmidt/macports/dports/devel/gperf DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gperf 3.0.4_0 exists in the ports tree DEBUG: gperf 3.0.4_0 +universal is the latest installed DEBUG: gperf 3.0.4_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /Users/rschmidt/macports/dports/devel/gperf DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /Users/rschmidt/macports/dports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /Users/rschmidt/macports/dports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port gperf. DEBUG: Requested variant i386 is not provided by port gperf. DEBUG: Requested variant macosx is not provided by port gperf. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0 DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0 DEBUG: Found port in file:///Users/rschmidt/macports/dports/devel/ncurses DEBUG: epoch: in tree: 0 installed: 0 DEBUG: ncurses 5.7_0 exists in the ports tree DEBUG: ncurses 5.7_0 +darwin_10+universal is the latest installed DEBUG: ncurses 5.7_0 +darwin_10+universal is active DEBUG: Merging existing variants darwin_10 universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /Users/rschmidt/macports/dports/devel/ncurses DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /Users/rschmidt/macports/dports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /Users/rschmidt/macports/dports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port ncurses. DEBUG: Requested variant i386 is not provided by port ncurses. DEBUG: Requested variant macosx is not provided by port ncurses. DEBUG: Executing variant universal provides universal DEBUG: Executing variant darwin_10 provides darwin_10 DEBUG: Found port in file:///Users/rschmidt/macports/dports/devel/ncursesw DEBUG: epoch: in tree: 0 installed: 0 DEBUG: ncursesw 5.7_0 exists in the ports tree DEBUG: ncursesw 5.7_0 +darwin_10+universal is the latest installed DEBUG: ncursesw 5.7_0 +darwin_10+universal is active DEBUG: Merging existing variants darwin_10 universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /Users/rschmidt/macports/dports/devel/ncursesw DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /Users/rschmidt/macports/dports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /Users/rschmidt/macports/dports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port ncursesw. DEBUG: Requested variant i386 is not provided by port ncursesw. DEBUG: Requested variant macosx is not provided by port ncursesw. DEBUG: Executing variant universal provides universal DEBUG: Executing variant darwin_10 provides darwin_10 DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0 DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0 DEBUG: Found port in file:///Users/rschmidt/macports/dports/textproc/expat DEBUG: epoch: in tree: 0 installed: 0 DEBUG: expat 2.0.1_0 exists in the ports tree DEBUG: expat 2.0.1_0 +universal is the latest installed DEBUG: expat 2.0.1_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /Users/rschmidt/macports/dports/textproc/expat DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /Users/rschmidt/macports/dports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port expat. DEBUG: Requested variant i386 is not provided by port expat. DEBUG: Requested variant macosx is not provided by port expat. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0 DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4 DEBUG: No need to upgrade! python24 2.4.6_4 >= python24 2.4.6_4 DEBUG: Found port in file:///Users/rschmidt/macports/dports/net/libpcap DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libpcap 1.0.0_1 exists in the ports tree DEBUG: libpcap 1.0.0_1 +universal is the latest installed DEBUG: libpcap 1.0.0_1 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /Users/rschmidt/macports/dports/net/libpcap DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /Users/rschmidt/macports/dports/_resources/port1.0/variant_descriptions.conf DEBUG: adding the default universal variant DEBUG: Requested variant darwin is not provided by port libpcap. DEBUG: Requested variant i386 is not provided by port libpcap. DEBUG: Requested variant macosx is not provided by port libpcap. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! libpcap 1.0.0_1 >= libpcap 1.0.0_1 ---> Computing dependencies for py-pcapy DEBUG: Searching for dependency: python24 DEBUG: Found Dependency: receipt exists for python24 DEBUG: Searching for dependency: libpcap DEBUG: Found Dependency: receipt exists for libpcap DEBUG: Executing org.macports.main (py-pcapy) ---> Fetching py-pcapy DEBUG: Executing org.macports.fetch (py-pcapy) ---> Verifying checksum(s) for py-pcapy DEBUG: Executing org.macports.checksum (py-pcapy) ---> Checksumming pcapy-0.10.5.tar.gz DEBUG: Correct (md5) checksum for pcapy-0.10.5.tar.gz DEBUG: Correct (sha1) checksum for pcapy-0.10.5.tar.gz DEBUG: Correct (rmd160) checksum for pcapy-0.10.5.tar.gz ---> Extracting py-pcapy DEBUG: Executing org.macports.extract (py-pcapy) ---> Extracting pcapy-0.10.5.tar.gz DEBUG: setting option extract.args to /opt/local/var/macports/distfiles/python/pcapy-0.10.5.tar.gz DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.6' DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_Users_rschmidt_macports_dports_python_py-pcapy/work" && /usr/bin/gzip -dc /opt/local/var/macports/distfiles/python/pcapy-0.10.5.tar.gz | /usr/bin/gnutar --no-same-owner -xf -' DEBUG: Executing org.macports.patch (py-pcapy) ---> Configuring py-pcapy DEBUG: Using compiler 'Mac OS X gcc 4.2' DEBUG: Executing org.macports.configure (py-pcapy) ---> Building py-pcapy DEBUG: Executing org.macports.build (py-pcapy) DEBUG: Environment: CFLAGS='-I/opt/local/include' CPPFLAGS='-I/opt/local/include -L/opt/local/lib' MACOSX_DEPLOYMENT_TARGET='10.6' LDFLAGS='-L/opt/local/lib' DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_Users_rschmidt_macports_dports_python_py-pcapy/work/pcapy-0.10.5" && /opt/local/bin/python2.4 setup.py build' running build running build_ext building 'pcapy' extension creating build creating build/temp.macosx-10.6-i386-2.4 /usr/bin/gcc-4.2 -fno-strict-aliasing -fno-common -DNDEBUG -g -O3 -Wall -Wstrict-prototypes -I/opt/local/include -I/opt/local/include -L/opt/local/lib -I/opt/local/include/python2.4 -c pcapdumper.cc -o build/temp.macosx-10.6-i386-2.4/pcapdumper.o cc1plus: warning: command line option "-Wstrict-prototypes" is valid for C/ObjC but not for C++ In file included from /opt/local/include/pcap/pcap.h:51, from /opt/local/include/pcap.h:45, from pcapdumper.cc:12: /opt/local/include/pcap/bpf.h:68: error: 'u_int' does not name a type /opt/local/include/pcap/bpf.h:89: error: 'u_int' does not name a type /opt/local/include/pcap/bpf.h:105: error: 'u_short' does not name a type /opt/local/include/pcap/bpf.h:106: error: 'u_short' does not name a type /opt/local/include/pcap/bpf.h:905: error: 'u_short' does not name a type /opt/local/include/pcap/bpf.h:906: error: 'u_char' does not name a type /opt/local/include/pcap/bpf.h:907: error: 'u_char' does not name a type /opt/local/include/pcap/bpf.h:908: error: 'bpf_u_int32' does not name a type /opt/local/include/pcap/bpf.h:919: error: 'u_int' does not name a type In file included from /opt/local/include/pcap.h:45, from pcapdumper.cc:12: /opt/local/include/pcap/pcap.h:117: error: 'bpf_u_int32' does not name a type /opt/local/include/pcap/pcap.h:118: error: 'u_short' does not name a type /opt/local/include/pcap/pcap.h:119: error: 'u_short' does not name a type /opt/local/include/pcap/pcap.h:121: error: 'bpf_u_int32' does not name a type /opt/local/include/pcap/pcap.h:122: error: 'bpf_u_int32' does not name a type /opt/local/include/pcap/pcap.h:123: error: 'bpf_u_int32' does not name a type /opt/local/include/pcap/pcap.h:156: error: 'bpf_u_int32' does not name a type /opt/local/include/pcap/pcap.h:157: error: 'bpf_u_int32' does not name a type /opt/local/include/pcap/pcap.h:164: error: 'u_int' does not name a type /opt/local/include/pcap/pcap.h:165: error: 'u_int' does not name a type /opt/local/include/pcap/pcap.h:166: error: 'u_int' does not name a type /opt/local/include/pcap/pcap.h:213: error: 'bpf_u_int32' does not name a type /opt/local/include/pcap/pcap.h:229: error: typedef 'pcap_handler' is initialized (use __typeof__ instead) /opt/local/include/pcap/pcap.h:229: error: 'u_char' was not declared in this scope /opt/local/include/pcap/pcap.h:229: error: expected primary-expression before ',' token /opt/local/include/pcap/pcap.h:229: error: expected primary-expression before 'const' /opt/local/include/pcap/pcap.h:230: error: expected primary-expression before 'const' /opt/local/include/pcap/pcap.h:257: error: 'bpf_u_int32' has not been declared /opt/local/include/pcap/pcap.h:257: error: 'bpf_u_int32' has not been declared /opt/local/include/pcap/pcap.h:284: error: 'pcap_handler' has not been declared /opt/local/include/pcap/pcap.h:284: error: 'u_char' has not been declared /opt/local/include/pcap/pcap.h:285: error: 'pcap_handler' has not been declared /opt/local/include/pcap/pcap.h:285: error: 'u_char' has not been declared /opt/local/include/pcap/pcap.h:286: error: expected initializer before '*' token /opt/local/include/pcap/pcap.h:288: error: expected ',' or '...' before '*' token /opt/local/include/pcap/pcap.h:288: error: ISO C++ forbids declaration of 'u_char' with no type /opt/local/include/pcap/pcap.h:296: error: expected ',' or '...' before '*' token /opt/local/include/pcap/pcap.h:296: error: ISO C++ forbids declaration of 'u_char' with no type /opt/local/include/pcap/pcap.h:302: error: 'bpf_u_int32' has not been declared /opt/local/include/pcap/pcap.h:304: error: 'bpf_u_int32' has not been declared /opt/local/include/pcap/pcap.h:307: error: expected ',' or '...' before '*' token /opt/local/include/pcap/pcap.h:307: error: ISO C++ forbids declaration of 'u_char' with no type /opt/local/include/pcap/pcap.h:331: error: variable or field 'pcap_dump' declared void /opt/local/include/pcap/pcap.h:331: error: 'u_char' was not declared in this scope /opt/local/include/pcap/pcap.h:331: error: expected primary-expression before ',' token /opt/local/include/pcap/pcap.h:331: error: expected primary-expression before 'const' /opt/local/include/pcap/pcap.h:331: error: expected primary-expression before 'const' /opt/local/include/pcap/pcap.h:339: error: 'u_int' does not name a type pcapdumper.cc:48: warning: deprecated conversion from string constant to 'char*' pcapdumper.cc:48: warning: deprecated conversion from string constant to 'char*' pcapdumper.cc:74: warning: deprecated conversion from string constant to 'char*' pcapdumper.cc: In function 'PyObject* p_dump(pcapdumper*, PyObject*)': pcapdumper.cc:95: error: 'u_char' was not declared in this scope pcapdumper.cc:95: error: 'data' was not declared in this scope pcapdumper.cc:110: error: expected primary-expression before ')' token pcapdumper.cc:110: error: 'pcap_dump' was not declared in this scope error: command '/usr/bin/gcc-4.2' failed with exit status 1 Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_Users_rschmidt_macports_dports_python_py-pcapy/work/pcapy-0.10.5" && /opt/local/bin/python2.4 setup.py build " returned error 1 DEBUG: Backtrace: shell command " cd "/opt/local/var/macports/build/_Users_rschmidt_macports_dports_python_py-pcapy/work/pcapy-0.10.5" && /opt/local/bin/python2.4 setup.py build " returned error 1 while executing "command_exec build" (procedure "portbuild::build_main" line 9) invoked from within "$procedure $targetname" Warning: the following items did not execute (for py-pcapy): org.macports.activate org.macports.build org.macports.destroot org.macports.install Error: Status 1 encountered during processing. To report a bug, see