lists:macports denisl$ sudo port -d install openmotif +universal DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/openmotif DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/openmotif DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port openmotif. DEBUG: Requested variant i386 is not provided by port openmotif. DEBUG: Requested variant macosx is not provided by port openmotif. DEBUG: Executing variant universal provides universal DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg DEBUG: epoch: in tree: 0 installed: 0 DEBUG: jpeg 8a_0 exists in the ports tree DEBUG: jpeg 8a_0 is the latest installed DEBUG: jpeg 8a_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port jpeg. DEBUG: Requested variant i386 is not provided by port jpeg. DEBUG: Requested variant macosx is not provided by port jpeg. DEBUG: No need to upgrade! jpeg 8a_0 >= jpeg 8a_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libpng 1.2.43_0 exists in the ports tree DEBUG: libpng 1.2.43_0 is the latest installed DEBUG: libpng 1.2.43_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port libpng. DEBUG: Requested variant i386 is not provided by port libpng. DEBUG: Requested variant macosx is not provided by port libpng. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib DEBUG: epoch: in tree: 0 installed: 0 DEBUG: zlib 1.2.4_1 exists in the ports tree DEBUG: zlib 1.2.4_1 is the latest installed DEBUG: zlib 1.2.4_1 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port zlib. DEBUG: Requested variant i386 is not provided by port zlib. DEBUG: Requested variant macosx is not provided by port zlib. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! zlib 1.2.4_1 >= zlib 1.2.4_1 DEBUG: No need to upgrade! libpng 1.2.43_0 >= libpng 1.2.43_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libiconv 1.13.1_0 exists in the ports tree DEBUG: libiconv 1.13.1_0 is the latest installed DEBUG: libiconv 1.13.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port libiconv. DEBUG: Requested variant i386 is not provided by port libiconv. DEBUG: Requested variant macosx is not provided by port libiconv. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gperf 3.0.4_0 exists in the ports tree DEBUG: gperf 3.0.4_0 is the latest installed DEBUG: gperf 3.0.4_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port gperf. DEBUG: Requested variant i386 is not provided by port gperf. DEBUG: Requested variant macosx is not provided by port gperf. DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0 DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libsm DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libsm 1.1.1_0 exists in the ports tree DEBUG: xorg-libsm 1.1.1_0 is the latest installed DEBUG: xorg-libsm 1.1.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libsm DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libsm. DEBUG: Requested variant i386 is not provided by port xorg-libsm. DEBUG: Requested variant macosx is not provided by port xorg-libsm. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig DEBUG: epoch: in tree: 0 installed: 0 DEBUG: pkgconfig 0.23_1 exists in the ports tree DEBUG: pkgconfig 0.23_1 is the latest installed DEBUG: pkgconfig 0.23_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port pkgconfig. DEBUG: Requested variant i386 is not provided by port pkgconfig. DEBUG: Requested variant macosx is not provided by port pkgconfig. DEBUG: No need to upgrade! pkgconfig 0.23_1 >= pkgconfig 0.23_1 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xtrans DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-xtrans 1.2.5_0 exists in the ports tree DEBUG: xorg-xtrans 1.2.5_0 is the latest installed DEBUG: xorg-xtrans 1.2.5_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xtrans DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-xtrans. DEBUG: Requested variant i386 is not provided by port xorg-xtrans. DEBUG: Requested variant macosx is not provided by port xorg-xtrans. DEBUG: No need to upgrade! xorg-xtrans 1.2.5_0 >= xorg-xtrans 1.2.5_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libice DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libice 1.0.6_0 exists in the ports tree DEBUG: xorg-libice 1.0.6_0 is the latest installed DEBUG: xorg-libice 1.0.6_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libice DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libice. DEBUG: Requested variant i386 is not provided by port xorg-libice. DEBUG: Requested variant macosx is not provided by port xorg-libice. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-xproto 7.0.16_0 exists in the ports tree DEBUG: xorg-xproto 7.0.16_0 is the latest installed DEBUG: xorg-xproto 7.0.16_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-xproto. DEBUG: Requested variant i386 is not provided by port xorg-xproto. DEBUG: Requested variant macosx is not provided by port xorg-xproto. DEBUG: No need to upgrade! xorg-xproto 7.0.16_0 >= xorg-xproto 7.0.16_0 DEBUG: No need to upgrade! xorg-libice 1.0.6_0 >= xorg-libice 1.0.6_0 DEBUG: No need to upgrade! xorg-libsm 1.1.1_0 >= xorg-libsm 1.1.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXext DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXext 1.1.1_0 exists in the ports tree DEBUG: xorg-libXext 1.1.1_0 is the latest installed DEBUG: xorg-libXext 1.1.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXext DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXext. DEBUG: Requested variant i386 is not provided by port xorg-libXext. DEBUG: Requested variant macosx is not provided by port xorg-libXext. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libX11 1.3.3_0 exists in the ports tree DEBUG: xorg-libX11 1.3.3_0 is the latest installed DEBUG: xorg-libX11 1.3.3_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11 DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libX11. DEBUG: Requested variant i386 is not provided by port xorg-libX11. DEBUG: Requested variant macosx is not provided by port xorg-libX11. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-util-macros DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-util-macros 1.6.1_0 exists in the ports tree DEBUG: xorg-util-macros 1.6.1_0 is the latest installed DEBUG: xorg-util-macros 1.6.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-util-macros DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-util-macros. DEBUG: Requested variant i386 is not provided by port xorg-util-macros. DEBUG: Requested variant macosx is not provided by port xorg-util-macros. DEBUG: No need to upgrade! xorg-util-macros 1.6.1_0 >= xorg-util-macros 1.6.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-bigreqsproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-bigreqsproto 1.1.0_0 exists in the ports tree DEBUG: xorg-bigreqsproto 1.1.0_0 is the latest installed DEBUG: xorg-bigreqsproto 1.1.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-bigreqsproto DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-bigreqsproto. DEBUG: Requested variant i386 is not provided by port xorg-bigreqsproto. DEBUG: Requested variant macosx is not provided by port xorg-bigreqsproto. DEBUG: No need to upgrade! xorg-bigreqsproto 1.1.0_0 >= xorg-bigreqsproto 1.1.0_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcmiscproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-xcmiscproto 1.2.0_0 exists in the ports tree DEBUG: xorg-xcmiscproto 1.2.0_0 is the latest installed DEBUG: xorg-xcmiscproto 1.2.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcmiscproto DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-xcmiscproto. DEBUG: Requested variant i386 is not provided by port xorg-xcmiscproto. DEBUG: Requested variant macosx is not provided by port xorg-xcmiscproto. DEBUG: No need to upgrade! xorg-xcmiscproto 1.2.0_0 >= xorg-xcmiscproto 1.2.0_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-xextproto 7.1.1_0 exists in the ports tree DEBUG: xorg-xextproto 7.1.1_0 is the latest installed DEBUG: xorg-xextproto 7.1.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-xextproto. DEBUG: Requested variant i386 is not provided by port xorg-xextproto. DEBUG: Requested variant macosx is not provided by port xorg-xextproto. DEBUG: No need to upgrade! xorg-xextproto 7.1.1_0 >= xorg-xextproto 7.1.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xf86bigfontproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-xf86bigfontproto 1.2.0_0 exists in the ports tree DEBUG: xorg-xf86bigfontproto 1.2.0_0 is the latest installed DEBUG: xorg-xf86bigfontproto 1.2.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xf86bigfontproto DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-xf86bigfontproto. DEBUG: Requested variant i386 is not provided by port xorg-xf86bigfontproto. DEBUG: Requested variant macosx is not provided by port xorg-xf86bigfontproto. DEBUG: No need to upgrade! xorg-xf86bigfontproto 1.2.0_0 >= xorg-xf86bigfontproto 1.2.0_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-inputproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-inputproto 2.0_0 exists in the ports tree DEBUG: xorg-inputproto 2.0_0 is the latest installed DEBUG: xorg-inputproto 2.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-inputproto DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-inputproto. DEBUG: Requested variant i386 is not provided by port xorg-inputproto. DEBUG: Requested variant macosx is not provided by port xorg-inputproto. DEBUG: No need to upgrade! xorg-inputproto 2.0_0 >= xorg-inputproto 2.0_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXdmcp 1.0.3_0 exists in the ports tree DEBUG: xorg-libXdmcp 1.0.3_0 is the latest installed DEBUG: xorg-libXdmcp 1.0.3_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXdmcp. DEBUG: Requested variant i386 is not provided by port xorg-libXdmcp. DEBUG: Requested variant macosx is not provided by port xorg-libXdmcp. DEBUG: No need to upgrade! xorg-libXdmcp 1.0.3_0 >= xorg-libXdmcp 1.0.3_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXau 1.0.5_0 exists in the ports tree DEBUG: xorg-libXau 1.0.5_0 is the latest installed DEBUG: xorg-libXau 1.0.5_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXau. DEBUG: Requested variant i386 is not provided by port xorg-libXau. DEBUG: Requested variant macosx is not provided by port xorg-libXau. DEBUG: No need to upgrade! xorg-libXau 1.0.5_0 >= xorg-libXau 1.0.5_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-kbproto 1.0.4_0 exists in the ports tree DEBUG: xorg-kbproto 1.0.4_0 is the latest installed DEBUG: xorg-kbproto 1.0.4_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-kbproto. DEBUG: Requested variant i386 is not provided by port xorg-kbproto. DEBUG: Requested variant macosx is not provided by port xorg-kbproto. DEBUG: No need to upgrade! xorg-kbproto 1.0.4_0 >= xorg-kbproto 1.0.4_0 DEBUG: No need to upgrade! xorg-libX11 1.3.3_0 >= xorg-libX11 1.3.3_0 DEBUG: No need to upgrade! xorg-libXext 1.1.1_0 >= xorg-libXext 1.1.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: Xft2 2.1.14_0 exists in the ports tree DEBUG: Xft2 2.1.14_0 is the latest installed DEBUG: Xft2 2.1.14_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2 DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port Xft2. DEBUG: Requested variant i386 is not provided by port Xft2. DEBUG: Requested variant macosx is not provided by port Xft2. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xrender 0.9.5_0 exists in the ports tree DEBUG: xrender 0.9.5_0 is the latest installed DEBUG: xrender 0.9.5_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xrender. DEBUG: Requested variant i386 is not provided by port xrender. DEBUG: Requested variant macosx is not provided by port xrender. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-renderproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-renderproto 0.11_0 exists in the ports tree DEBUG: xorg-renderproto 0.11_0 is the latest installed DEBUG: xorg-renderproto 0.11_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-renderproto DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-renderproto. DEBUG: Requested variant i386 is not provided by port xorg-renderproto. DEBUG: Requested variant macosx is not provided by port xorg-renderproto. DEBUG: No need to upgrade! xorg-renderproto 0.11_0 >= xorg-renderproto 0.11_0 DEBUG: No need to upgrade! xrender 0.9.5_0 >= xrender 0.9.5_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype DEBUG: epoch: in tree: 0 installed: 0 DEBUG: freetype 2.3.12_0 exists in the ports tree DEBUG: freetype 2.3.12_0 +macosx is the latest installed DEBUG: freetype 2.3.12_0 +macosx+universal is active DEBUG: Merging existing variants macosx universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port freetype. DEBUG: Requested variant i386 is not provided by port freetype. DEBUG: Executing variant universal provides universal DEBUG: Executing variant macosx provides macosx DEBUG: No need to upgrade! freetype 2.3.12_0 >= freetype 2.3.12_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig DEBUG: epoch: in tree: 0 installed: 0 DEBUG: fontconfig 2.8.0_0 exists in the ports tree DEBUG: fontconfig 2.8.0_0 +macosx is the latest installed DEBUG: fontconfig 2.8.0_0 +macosx is active DEBUG: Merging existing variants macosx into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port fontconfig. DEBUG: Requested variant i386 is not provided by port fontconfig. DEBUG: Executing variant macosx provides macosx DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat DEBUG: epoch: in tree: 0 installed: 0 DEBUG: expat 2.0.1_0 exists in the ports tree DEBUG: expat 2.0.1_0 is the latest installed DEBUG: expat 2.0.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port expat. DEBUG: Requested variant i386 is not provided by port expat. DEBUG: Requested variant macosx is not provided by port expat. DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0 DEBUG: No need to upgrade! fontconfig 2.8.0_0 >= fontconfig 2.8.0_0 DEBUG: No need to upgrade! Xft2 2.1.14_0 >= Xft2 2.1.14_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXmu DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXmu 1.0.5_0 exists in the ports tree DEBUG: xorg-libXmu 1.0.5_0 is the latest installed DEBUG: xorg-libXmu 1.0.5_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXmu DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXmu. DEBUG: Requested variant i386 is not provided by port xorg-libXmu. DEBUG: Requested variant macosx is not provided by port xorg-libXmu. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXt DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXt 1.0.8_0 exists in the ports tree DEBUG: xorg-libXt 1.0.8_0 is the latest installed DEBUG: xorg-libXt 1.0.8_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXt DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXt. DEBUG: Requested variant i386 is not provided by port xorg-libXt. DEBUG: Requested variant macosx is not provided by port xorg-libXt. DEBUG: No need to upgrade! xorg-libXt 1.0.8_0 >= xorg-libXt 1.0.8_0 DEBUG: No need to upgrade! xorg-libXmu 1.0.5_0 >= xorg-libXmu 1.0.5_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXp DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXp 1.0.0_3 exists in the ports tree DEBUG: xorg-libXp 1.0.0_3 is the latest installed DEBUG: xorg-libXp 1.0.0_3 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXp DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXp. DEBUG: Requested variant i386 is not provided by port xorg-libXp. DEBUG: Requested variant macosx is not provided by port xorg-libXp. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libpthread-stubs DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libpthread-stubs 0.3_0 exists in the ports tree DEBUG: xorg-libpthread-stubs 0.3_0 is the latest installed DEBUG: xorg-libpthread-stubs 0.3_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libpthread-stubs DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-libpthread-stubs. DEBUG: Requested variant i386 is not provided by port xorg-libpthread-stubs. DEBUG: Requested variant macosx is not provided by port xorg-libpthread-stubs. DEBUG: No need to upgrade! xorg-libpthread-stubs 0.3_0 >= xorg-libpthread-stubs 0.3_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf DEBUG: epoch: in tree: 0 installed: 0 DEBUG: autoconf 2.65_1 exists in the ports tree DEBUG: autoconf 2.65_1 is the latest installed DEBUG: autoconf 2.65_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port autoconf. DEBUG: Requested variant i386 is not provided by port autoconf. DEBUG: Requested variant macosx is not provided by port autoconf. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: perl5 5.8.9_0 exists in the ports tree DEBUG: perl5 5.8.9_0 is the latest installed DEBUG: perl5 5.8.9_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port perl5. DEBUG: Requested variant i386 is not provided by port perl5. DEBUG: Requested variant macosx is not provided by port perl5. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: perl5.8 5.8.9_3 exists in the ports tree DEBUG: perl5.8 5.8.9_3 is the latest installed DEBUG: perl5.8 5.8.9_3 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8 DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port perl5.8. DEBUG: Requested variant i386 is not provided by port perl5.8. DEBUG: Requested variant macosx is not provided by port perl5.8. DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3 DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: m4 1.4.14_0 exists in the ports tree DEBUG: m4 1.4.14_0 is the latest installed DEBUG: m4 1.4.14_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4 DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port m4. DEBUG: Requested variant i386 is not provided by port m4. DEBUG: Requested variant macosx is not provided by port m4. DEBUG: No need to upgrade! m4 1.4.14_0 >= m4 1.4.14_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man DEBUG: epoch: in tree: 0 installed: 0 DEBUG: help2man 1.37.1_1 exists in the ports tree DEBUG: help2man 1.37.1_1 is the latest installed DEBUG: help2man 1.37.1_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port help2man. DEBUG: Requested variant i386 is not provided by port help2man. DEBUG: Requested variant macosx is not provided by port help2man. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext DEBUG: epoch: in tree: 0 installed: 0 DEBUG: p5-locale-gettext 1.05_2 exists in the ports tree DEBUG: p5-locale-gettext 1.05_2 is the latest installed DEBUG: p5-locale-gettext 1.05_2 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port p5-locale-gettext. DEBUG: Requested variant i386 is not provided by port p5-locale-gettext. DEBUG: Requested variant macosx is not provided by port p5-locale-gettext. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gettext 0.17_4 exists in the ports tree DEBUG: gettext 0.17_4 is the latest installed DEBUG: gettext 0.17_4 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port gettext. DEBUG: Requested variant i386 is not provided by port gettext. DEBUG: Requested variant macosx is not provided by port gettext. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses DEBUG: epoch: in tree: 0 installed: 0 DEBUG: ncurses 5.7_0 exists in the ports tree DEBUG: ncurses 5.7_0 is the latest installed DEBUG: ncurses 5.7_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port ncurses. DEBUG: Requested variant i386 is not provided by port ncurses. DEBUG: Requested variant macosx is not provided by port ncurses. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw DEBUG: epoch: in tree: 0 installed: 0 DEBUG: ncursesw 5.7_0 exists in the ports tree DEBUG: ncursesw 5.7_0 is the latest installed DEBUG: ncursesw 5.7_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port ncursesw. DEBUG: Requested variant i386 is not provided by port ncursesw. DEBUG: Requested variant macosx is not provided by port ncursesw. DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0 DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0 DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4 DEBUG: No need to upgrade! p5-locale-gettext 1.05_2 >= p5-locale-gettext 1.05_2 DEBUG: No need to upgrade! help2man 1.37.1_1 >= help2man 1.37.1_1 DEBUG: No need to upgrade! autoconf 2.65_1 >= autoconf 2.65_1 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake DEBUG: epoch: in tree: 0 installed: 0 DEBUG: automake 1.11.1_0 exists in the ports tree DEBUG: automake 1.11.1_0 is the latest installed DEBUG: automake 1.11.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port automake. DEBUG: Requested variant i386 is not provided by port automake. DEBUG: Requested variant macosx is not provided by port automake. DEBUG: No need to upgrade! automake 1.11.1_0 >= automake 1.11.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libtool 2.2.6b_1 exists in the ports tree DEBUG: libtool 2.2.6b_1 +darwin is the latest installed DEBUG: libtool 2.2.6b_1 +darwin is active DEBUG: Merging existing variants darwin into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: adding the default universal variant DEBUG: Requested variant i386 is not provided by port libtool. DEBUG: Requested variant macosx is not provided by port libtool. DEBUG: Executing variant darwin provides darwin DEBUG: No need to upgrade! libtool 2.2.6b_1 >= libtool 2.2.6b_1 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-printproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-printproto 1.0.4_0 exists in the ports tree DEBUG: xorg-printproto 1.0.4_0 is the latest installed DEBUG: xorg-printproto 1.0.4_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-printproto DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-printproto. DEBUG: Requested variant i386 is not provided by port xorg-printproto. DEBUG: Requested variant macosx is not provided by port xorg-printproto. DEBUG: No need to upgrade! xorg-printproto 1.0.4_0 >= xorg-printproto 1.0.4_0 DEBUG: No need to upgrade! xorg-libXp 1.0.0_3 >= xorg-libXp 1.0.0_3 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xbitmaps DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xbitmaps 1.1.0_0 exists in the ports tree DEBUG: xbitmaps 1.1.0_0 is the latest installed DEBUG: xbitmaps 1.1.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xbitmaps DEBUG: OS Platform: darwin DEBUG: OS Version: 9.8.0 DEBUG: Mac OS X Version: 10.5 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xbitmaps. DEBUG: Requested variant i386 is not provided by port xbitmaps. DEBUG: Requested variant macosx is not provided by port xbitmaps. DEBUG: No need to upgrade! xbitmaps 1.1.0_0 >= xbitmaps 1.1.0_0 ---> Computing dependencies for openmotif DEBUG: Checking for conflicts against openmotif DEBUG: Searching for dependency: lesstif DEBUG: Didn't find receipt, going to depspec regex for: lesstif DEBUG: Searching for dependency: jpeg DEBUG: Found Dependency: receipt exists for jpeg DEBUG: Searching for dependency: libpng DEBUG: Found Dependency: receipt exists for libpng DEBUG: Searching for dependency: libiconv DEBUG: Found Dependency: receipt exists for libiconv DEBUG: Searching for dependency: xorg-libsm DEBUG: Found Dependency: receipt exists for xorg-libsm DEBUG: Searching for dependency: xorg-libXext DEBUG: Found Dependency: receipt exists for xorg-libXext DEBUG: Searching for dependency: Xft2 DEBUG: Found Dependency: receipt exists for Xft2 DEBUG: Searching for dependency: xorg-libXmu DEBUG: Found Dependency: receipt exists for xorg-libXmu DEBUG: Searching for dependency: xorg-libXp DEBUG: Found Dependency: receipt exists for xorg-libXp DEBUG: Searching for dependency: xorg-libXt DEBUG: Found Dependency: receipt exists for xorg-libXt DEBUG: Searching for dependency: pkgconfig DEBUG: Found Dependency: receipt exists for pkgconfig DEBUG: Searching for dependency: xbitmaps DEBUG: Found Dependency: receipt exists for xbitmaps DEBUG: Executing org.macports.main (openmotif) DEBUG: Skipping completed org.macports.fetch (openmotif) DEBUG: Skipping completed org.macports.checksum (openmotif) DEBUG: Skipping completed org.macports.extract (openmotif) DEBUG: Skipping completed org.macports.patch (openmotif) DEBUG: Skipping completed org.macports.configure (openmotif) ---> Building openmotif DEBUG: Executing org.macports.build (openmotif) DEBUG: port disallows a parallel build DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.5' LANG='C' DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_openmotif/work/openmotif-2.3.2" && /usr/bin/make all' Making all in bindings make[1]: Nothing to be done for `all'. Making all in bitmaps make[1]: Nothing to be done for `all'. Making all in config Making all in cf make[2]: Nothing to be done for `all'. Making all in imake make[2]: Nothing to be done for `all'. Making all in makedepend make[2]: Nothing to be done for `all'. Making all in util make[2]: Nothing to be done for `all'. make[2]: Nothing to be done for `all-am'. Making all in localized Making all in util make[2]: Nothing to be done for `all'. make[2]: Nothing to be done for `all-am'. Making all in lib Making all in Xm /usr/bin/make all-am make[3]: Nothing to be done for `all-am'. Making all in Mrm /usr/bin/make all-am make[3]: Nothing to be done for `all-am'. make[2]: Nothing to be done for `all-am'. Making all in include /usr/bin/make all-recursive Making all in Dt make[3]: Nothing to be done for `all'. make[3]: Nothing to be done for `all-am'. Making all in tools Making all in wml /bin/sh ../../libtool --tag=CC --mode=link /usr/bin/gcc-4.0 -O2 -arch x86_64 -arch i386 -arch ppc -Wall -g -fno-strict-aliasing -Wno-unused -Wno-comment -fno-tree-ter -I/opt/local/include -I/opt/local/include/freetype2 -L/opt/local/lib -arch x86_64 -arch i386 -arch ppc -o wmldbcreate wmldbcreate.o ../../lib/Xm/libXm.la -L/opt/local/lib -lXft -lXrender -lfontconfig -lexpat -liconv -lfreetype -lz -lX11 -lXau -lXdmcp /usr/bin/gcc-4.0 -O2 -arch x86_64 -arch i386 -arch ppc -Wall -g -fno-strict-aliasing -Wno-unused -Wno-comment -fno-tree-ter -I/opt/local/include -I/opt/local/include/freetype2 -arch x86_64 -arch i386 -arch ppc -o .libs/wmldbcreate wmldbcreate.o -L/opt/local/lib ../../lib/Xm/.libs/libXm.dylib /opt/local/lib/libXt.dylib /opt/local/lib/libSM.dylib /opt/local/lib/libICE.dylib /opt/local/lib/libXp.dylib /opt/local/lib/libXext.dylib /opt/local/lib/libXft.dylib /opt/local/lib/libXrender.dylib /opt/local/lib/libfontconfig.dylib /opt/local/lib/libexpat.dylib /opt/local/lib/libiconv.dylib /opt/local/lib/libfreetype.dylib -lz /opt/local/lib/libX11.dylib /opt/local/lib/libXau.dylib /opt/local/lib/libXdmcp.dylib ld warning: in /opt/local/lib/libXt.dylib, file is not of required architecture ld warning: in /opt/local/lib/libSM.dylib, file is not of required architecture ld warning: in /opt/local/lib/libICE.dylib, file is not of required architecture ld warning: in /opt/local/lib/libXp.dylib, file is not of required architecture ld warning: in /opt/local/lib/libXext.dylib, file is not of required architecture ld warning: in /opt/local/lib/libXft.dylib, file is not of required architecture ld warning: in /opt/local/lib/libXrender.dylib, file is not of required architecture ld warning: in /opt/local/lib/libfontconfig.dylib, file is not of required architecture ld warning: in /opt/local/lib/libexpat.dylib, file is not of required architecture ld warning: in /opt/local/lib/libiconv.dylib, file is not of required architecture ld warning: in /opt/local/lib/libX11.dylib, file is not of required architecture ld warning: in /opt/local/lib/libXau.dylib, file is not of required architecture ld warning: in /opt/local/lib/libXdmcp.dylib, file is not of required architecture Undefined symbols for architecture x86_64: "_XtStrings", referenced from: _uil_reason_toolkit_names_vec in wmldbcreate.o _uil_reason_toolkit_names_vec in wmldbcreate.o _uil_reason_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o "_XtShellStrings", referenced from: _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o ld: symbol(s) not found for architecture x86_64 collect2: ld returned 1 exit status ld warning: in /opt/local/lib/libXt.dylib, file is not of required architecture ld warning: in /opt/local/lib/libSM.dylib, file is not of required architecture ld warning: in /opt/local/lib/libICE.dylib, file is not of required architecture ld warning: in /opt/local/lib/libXp.dylib, file is not of required architecture ld warning: in /opt/local/lib/libXext.dylib, file is not of required architecture ld warning: in /opt/local/lib/libXft.dylib, file is not of required architecture ld warning: in /opt/local/lib/libXrender.dylib, file is not of required architecture ld warning: in /opt/local/lib/libfontconfig.dylib, file is not of required architecture ld warning: in /opt/local/lib/libexpat.dylib, file is not of required architecture ld warning: in /opt/local/lib/libiconv.dylib, file is not of required architecture ld warning: in /opt/local/lib/libX11.dylib, file is not of required architecture ld warning: in /opt/local/lib/libXau.dylib, file is not of required architecture ld warning: in /opt/local/lib/libXdmcp.dylib, file is not of required architecture Undefined symbols for architecture ppc: "_XtStrings", referenced from: _uil_reason_toolkit_names_vec in wmldbcreate.o _uil_reason_toolkit_names_vec in wmldbcreate.o _uil_reason_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o "_XtShellStrings", referenced from: _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o _uil_argument_toolkit_names_vec in wmldbcreate.o ld: symbol(s) not found for architecture ppc collect2: ld returned 1 exit status lipo: can't open input file: /var/tmp//ccYWo83z.out (No such file or directory) make[2]: *** [wmldbcreate] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all-recursive] Error 1 Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_openmotif/work/openmotif-2.3.2" && /usr/bin/make all " returned error 2 DEBUG: Backtrace: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_openmotif/work/openmotif-2.3.2" && /usr/bin/make all " returned error 2 while executing "command_exec build" (procedure "portbuild::build_main" line 9) invoked from within "$procedure $targetname" Warning: the following items did not execute (for openmotif): org.macports.activate org.macports.build org.macports.destroot org.macports.install Error: Status 1 encountered during processing. To report a bug, see