Last login: Fri Apr 23 20:37:05 on ttyp1
Welcome to Darwin!
freds-mac-mini:~ fred$ sudo port -d install ffmpeg
Password:
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/ffmpeg
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/ffmpeg
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port ffmpeg.
DEBUG: Requested variant macosx is not provided by port ffmpeg.
DEBUG: Executing variant powerpc provides powerpc
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/lame
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: lame 3.98.4_0 exists in the ports tree
DEBUG: lame 3.98.4_0  is the latest installed
DEBUG: lame 3.98.4_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/lame
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port lame.
DEBUG: Requested variant darwin is not provided by port lame.
DEBUG: Requested variant macosx is not provided by port lame.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncurses 5.7_0 exists in the ports tree
DEBUG: ncurses 5.7_0  is the latest installed
DEBUG: ncurses 5.7_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant powerpc is not provided by port ncurses.
DEBUG: Requested variant darwin is not provided by port ncurses.
DEBUG: Requested variant macosx is not provided by port ncurses.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncursesw 5.7_0 exists in the ports tree
DEBUG: ncursesw 5.7_0  is the latest installed
DEBUG: ncursesw 5.7_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant powerpc is not provided by port ncursesw.
DEBUG: Requested variant darwin is not provided by port ncursesw.
DEBUG: Requested variant macosx is not provided by port ncursesw.
DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
DEBUG: No need to upgrade! lame 3.98.4_0 >= lame 3.98.4_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/libogg
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libogg 1.2.0_0 exists in the ports tree
DEBUG: libogg 1.2.0_0  is the latest installed
DEBUG: libogg 1.2.0_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/libogg
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port libogg.
DEBUG: Requested variant darwin is not provided by port libogg.
DEBUG: Requested variant macosx is not provided by port libogg.
DEBUG: No need to upgrade! libogg 1.2.0_0 >= libogg 1.2.0_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/dirac
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: dirac 1.0.2_0 exists in the ports tree
DEBUG: dirac 1.0.2_0  is the latest installed
DEBUG: dirac 1.0.2_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/dirac
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant powerpc is not provided by port dirac.
DEBUG: Requested variant darwin is not provided by port dirac.
DEBUG: Requested variant macosx is not provided by port dirac.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/cppunit
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: cppunit 1.12.1_0 exists in the ports tree
DEBUG: cppunit 1.12.1_0  is the latest installed
DEBUG: cppunit 1.12.1_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/cppunit
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port cppunit.
DEBUG: Requested variant darwin is not provided by port cppunit.
DEBUG: Requested variant macosx is not provided by port cppunit.
DEBUG: No need to upgrade! cppunit 1.12.1_0 >= cppunit 1.12.1_0
DEBUG: No need to upgrade! dirac 1.0.2_0 >= dirac 1.0.2_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/faac
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: faac 1.28_1 exists in the ports tree
DEBUG: faac 1.28_1  is the latest installed
DEBUG: faac 1.28_1  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/faac
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port faac.
DEBUG: Requested variant darwin is not provided by port faac.
DEBUG: Requested variant macosx is not provided by port faac.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: autoconf 2.65_1 exists in the ports tree
DEBUG: autoconf 2.65_1  is the latest installed
DEBUG: autoconf 2.65_1  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant powerpc is not provided by port autoconf.
DEBUG: Requested variant darwin is not provided by port autoconf.
DEBUG: Requested variant macosx is not provided by port autoconf.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: perl5 5.8.9_0 exists in the ports tree
DEBUG: perl5 5.8.9_0  is the latest installed
DEBUG: perl5 5.8.9_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: not using configure, so not adding the default universal variant
DEBUG: Requested variant powerpc is not provided by port perl5.
DEBUG: Requested variant darwin is not provided by port perl5.
DEBUG: Requested variant macosx is not provided by port perl5.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: perl5.8 5.8.9_3 exists in the ports tree
DEBUG: perl5.8 5.8.9_3  is the latest installed
DEBUG: perl5.8 5.8.9_3  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port perl5.8.
DEBUG: Requested variant darwin is not provided by port perl5.8.
DEBUG: Requested variant macosx is not provided by port perl5.8.
DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3
DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: m4 1.4.14_0 exists in the ports tree
DEBUG: m4 1.4.14_0  is the latest installed
DEBUG: m4 1.4.14_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port m4.
DEBUG: Requested variant darwin is not provided by port m4.
DEBUG: Requested variant macosx is not provided by port m4.
DEBUG: No need to upgrade! m4 1.4.14_0 >= m4 1.4.14_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: help2man 1.37.1_1 exists in the ports tree
DEBUG: help2man 1.37.1_1  is the latest installed
DEBUG: help2man 1.37.1_1  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port help2man.
DEBUG: Requested variant darwin is not provided by port help2man.
DEBUG: Requested variant macosx is not provided by port help2man.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: p5-locale-gettext 1.05_2 exists in the ports tree
DEBUG: p5-locale-gettext 1.05_2  is the latest installed
DEBUG: p5-locale-gettext 1.05_2  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port p5-locale-gettext.
DEBUG: Requested variant darwin is not provided by port p5-locale-gettext.
DEBUG: Requested variant macosx is not provided by port p5-locale-gettext.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gettext 0.17_4 exists in the ports tree
DEBUG: gettext 0.17_4  is the latest installed
DEBUG: gettext 0.17_4  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant powerpc is not provided by port gettext.
DEBUG: Requested variant darwin is not provided by port gettext.
DEBUG: Requested variant macosx is not provided by port gettext.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libiconv 1.13.1_0 exists in the ports tree
DEBUG: libiconv 1.13.1_0  is the latest installed
DEBUG: libiconv 1.13.1_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant powerpc is not provided by port libiconv.
DEBUG: Requested variant darwin is not provided by port libiconv.
DEBUG: Requested variant macosx is not provided by port libiconv.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gperf 3.0.4_0 exists in the ports tree
DEBUG: gperf 3.0.4_0  is the latest installed
DEBUG: gperf 3.0.4_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant powerpc is not provided by port gperf.
DEBUG: Requested variant darwin is not provided by port gperf.
DEBUG: Requested variant macosx is not provided by port gperf.
DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0
DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: expat 2.0.1_0 exists in the ports tree
DEBUG: expat 2.0.1_0  is the latest installed
DEBUG: expat 2.0.1_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port expat.
DEBUG: Requested variant darwin is not provided by port expat.
DEBUG: Requested variant macosx is not provided by port expat.
DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4
DEBUG: No need to upgrade! p5-locale-gettext 1.05_2 >= p5-locale-gettext 1.05_2
DEBUG: No need to upgrade! help2man 1.37.1_1 >= help2man 1.37.1_1
DEBUG: No need to upgrade! autoconf 2.65_1 >= autoconf 2.65_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: automake 1.11.1_0 exists in the ports tree
DEBUG: automake 1.11.1_0  is the latest installed
DEBUG: automake 1.11.1_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port automake.
DEBUG: Requested variant darwin is not provided by port automake.
DEBUG: Requested variant macosx is not provided by port automake.
DEBUG: No need to upgrade! automake 1.11.1_0 >= automake 1.11.1_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libtool 2.2.6b_1 exists in the ports tree
DEBUG: libtool 2.2.6b_1 +darwin is the latest installed
DEBUG: libtool 2.2.6b_1 +darwin is active
DEBUG: Merging existing variants darwin into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant powerpc is not provided by port libtool.
DEBUG: Requested variant macosx is not provided by port libtool.
DEBUG: Executing variant darwin provides darwin
DEBUG: No need to upgrade! libtool 2.2.6b_1 >= libtool 2.2.6b_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/mp4v2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: mp4v2 1.9.1_2 exists in the ports tree
DEBUG: mp4v2 1.9.1_2  is the latest installed
DEBUG: mp4v2 1.9.1_2  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/mp4v2
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant powerpc is not provided by port mp4v2.
DEBUG: Requested variant darwin is not provided by port mp4v2.
DEBUG: Requested variant macosx is not provided by port mp4v2.
DEBUG: No need to upgrade! mp4v2 1.9.1_2 >= mp4v2 1.9.1_2
DEBUG: No need to upgrade! faac 1.28_1 >= faac 1.28_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/faad2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: faad2 2.7_0 exists in the ports tree
DEBUG: faad2 2.7_0 +darwin is the latest installed
DEBUG: faad2 2.7_0 +darwin is active
DEBUG: Merging existing variants darwin into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/faad2
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant powerpc is not provided by port faad2.
DEBUG: Requested variant macosx is not provided by port faad2.
DEBUG: Executing variant darwin provides darwin
DEBUG: No need to upgrade! faad2 2.7_0 >= faad2 2.7_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/XviD
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: XviD 1.2.2_0 exists in the ports tree
DEBUG: XviD 1.2.2_0  is the latest installed
DEBUG: XviD 1.2.2_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/XviD
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port XviD.
DEBUG: Requested variant darwin is not provided by port XviD.
DEBUG: Requested variant macosx is not provided by port XviD.
DEBUG: No need to upgrade! XviD 1.2.2_0 >= XviD 1.2.2_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: bzip2 1.0.5_3 exists in the ports tree
DEBUG: bzip2 1.0.5_3 +darwin is the latest installed
DEBUG: bzip2 1.0.5_3 +darwin is active
DEBUG: Merging existing variants darwin into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant powerpc is not provided by port bzip2.
DEBUG: Requested variant macosx is not provided by port bzip2.
DEBUG: Executing variant darwin provides darwin
DEBUG: No need to upgrade! bzip2 1.0.5_3 >= bzip2 1.0.5_3
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: zlib 1.2.5_0 exists in the ports tree
DEBUG: zlib 1.2.5_0  is the latest installed
DEBUG: zlib 1.2.5_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port zlib.
DEBUG: Requested variant darwin is not provided by port zlib.
DEBUG: Requested variant macosx is not provided by port zlib.
DEBUG: No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmake
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gmake 3.81_0 exists in the ports tree
DEBUG: gmake 3.81_0  is the latest installed
DEBUG: gmake 3.81_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmake
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port gmake.
DEBUG: Requested variant darwin is not provided by port gmake.
DEBUG: Requested variant macosx is not provided by port gmake.
DEBUG: No need to upgrade! gmake 3.81_0 >= gmake 3.81_0
--->  Computing dependencies for ffmpeg
DEBUG: Checking for conflicts against ffmpeg
DEBUG: Searching for dependency: ffmpeg-devel
DEBUG: Didn't find receipt, going to depspec regex for: ffmpeg-devel
DEBUG: Searching for dependency: lame
DEBUG: Found Dependency: receipt exists for lame
DEBUG: Searching for dependency: libvorbis
DEBUG: Didn't find receipt, going to depspec regex for: libvorbis
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/libvorbis
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/libvorbis
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port libvorbis.
DEBUG: Requested variant darwin is not provided by port libvorbis.
DEBUG: Requested variant macosx is not provided by port libvorbis.
DEBUG: Searching for dependency: libogg
DEBUG: Found Dependency: receipt exists for libogg
DEBUG: Searching for dependency: libtheora
DEBUG: Didn't find receipt, going to depspec regex for: libtheora
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/libtheora
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/libtheora
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: adding the default universal variant
DEBUG: Requested variant powerpc is not provided by port libtheora.
DEBUG: Requested variant darwin is not provided by port libtheora.
DEBUG: Requested variant macosx is not provided by port libtheora.
DEBUG: Executing variant darwin_powerpc provides darwin_powerpc
DEBUG: Searching for dependency: dirac
DEBUG: Found Dependency: receipt exists for dirac
DEBUG: Searching for dependency: schroedinger
DEBUG: Didn't find receipt, going to depspec regex for: schroedinger
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/schroedinger
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/schroedinger
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant powerpc is not provided by port schroedinger.
DEBUG: Requested variant darwin is not provided by port schroedinger.
DEBUG: Requested variant macosx is not provided by port schroedinger.
DEBUG: Searching for dependency: faac
DEBUG: Found Dependency: receipt exists for faac
DEBUG: Searching for dependency: faad2
DEBUG: Found Dependency: receipt exists for faad2
DEBUG: Searching for dependency: XviD
DEBUG: Found Dependency: receipt exists for XviD
DEBUG: Searching for dependency: x264
DEBUG: Didn't find receipt, going to depspec regex for: x264
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/x264
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/x264
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant powerpc is not provided by port x264.
DEBUG: Requested variant darwin is not provided by port x264.
DEBUG: Requested variant macosx is not provided by port x264.
DEBUG: Searching for dependency: libsdl
DEBUG: Didn't find receipt, going to depspec regex for: libsdl
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libsdl
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libsdl
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant powerpc is not provided by port libsdl.
DEBUG: Requested variant darwin is not provided by port libsdl.
DEBUG: Requested variant macosx is not provided by port libsdl.
DEBUG: Searching for dependency: bzip2
DEBUG: Found Dependency: receipt exists for bzip2
DEBUG: Searching for dependency: zlib
DEBUG: Found Dependency: receipt exists for zlib
DEBUG: Searching for dependency: gmake
DEBUG: Found Dependency: receipt exists for gmake
DEBUG: Searching for dependency: libogg
DEBUG: Found Dependency: receipt exists for libogg
DEBUG: Searching for dependency: pkgconfig
DEBUG: Found Dependency: receipt exists for pkgconfig
DEBUG: Searching for dependency: libvorbis
DEBUG: Didn't find receipt, going to depspec regex for: libvorbis
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/libvorbis
DEBUG: Searching for dependency: libogg
DEBUG: Found Dependency: receipt exists for libogg
DEBUG: Searching for dependency: pkgconfig
DEBUG: Found Dependency: receipt exists for pkgconfig
DEBUG: Searching for dependency: orc
DEBUG: Didn't find receipt, going to depspec regex for: orc
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/orc
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/orc
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant powerpc is not provided by port orc.
DEBUG: Requested variant darwin is not provided by port orc.
DEBUG: Requested variant macosx is not provided by port orc.
DEBUG: Searching for dependency: pkgconfig
DEBUG: Found Dependency: receipt exists for pkgconfig
DEBUG: Searching for dependency: liboil
DEBUG: Didn't find receipt, going to depspec regex for: liboil
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/liboil
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/liboil
DEBUG: OS Platform: darwin
DEBUG: OS Version: 8.11.0
DEBUG: Mac OS X Version: 10.4
DEBUG: System Arch: powerpc
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant powerpc is not provided by port liboil.
DEBUG: Requested variant darwin is not provided by port liboil.
DEBUG: Requested variant macosx is not provided by port liboil.
DEBUG: Searching for dependency: glib2
DEBUG: Found Dependency: receipt exists for glib2
DEBUG: Searching for dependency: pkgconfig
DEBUG: Found Dependency: receipt exists for pkgconfig
DEBUG: Checking for conflicts against libsdl
DEBUG: Searching for dependency: libsdl-devel
DEBUG: Didn't find receipt, going to depspec regex for: libsdl-devel
DEBUG: Searching for dependency: xorg-libXext
DEBUG: Found Dependency: receipt exists for xorg-libXext
DEBUG: Searching for dependency: xorg-libXrandr
DEBUG: Found Dependency: receipt exists for xorg-libXrandr
DEBUG: Searching for dependency: xrender
DEBUG: Found Dependency: receipt exists for xrender
DEBUG: Executing org.macports.main (libsdl)
DEBUG: Skipping completed org.macports.fetch (libsdl)
DEBUG: Skipping completed org.macports.checksum (libsdl)
DEBUG: Skipping completed org.macports.extract (libsdl)
DEBUG: Skipping completed org.macports.patch (libsdl)
DEBUG: Skipping completed org.macports.configure (libsdl)
--->  Building libsdl
DEBUG: Executing org.macports.build (libsdl)
DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.4'
DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_libsdl/work/SDL-1.2.14" && /usr/bin/make -j1 all'
/bin/sh ./libtool --mode=compile /usr/bin/gcc-4.0 -O2 -arch ppc -I/opt/local/include -I./include -D_GNU_SOURCE=1 -DTARGET_API_MAC_CARBON -DTARGET_API_MAC_OSX -fvisibility=hidden  -I/opt/local/include -DXTHREADS -D_THREAD_SAFE -maltivec -force_cpusubtype_ALL -fpascal-strings -c ./src/audio/macosx/SDL_coreaudio.c  -o build/SDL_coreaudio.lo
libtool: compile:  /usr/bin/gcc-4.0 -O2 -arch ppc -I/opt/local/include -I./include -D_GNU_SOURCE=1 -DTARGET_API_MAC_CARBON -DTARGET_API_MAC_OSX -fvisibility=hidden -I/opt/local/include -DXTHREADS -D_THREAD_SAFE -maltivec -force_cpusubtype_ALL -fpascal-strings -c ./src/audio/macosx/SDL_coreaudio.c  -fno-common -DPIC -o build/.libs/SDL_coreaudio.o
./src/audio/macosx/SDL_coreaudio.c:24:33: error: CoreAudio/CoreAudio.h: No such file or directory
./src/audio/macosx/SDL_coreaudio.c:26:33: error: AudioUnit/AudioUnit.h: No such file or directory
./src/audio/macosx/SDL_coreaudio.c:28:37: error: AudioUnit/AUNTComponent.h: No such file or directory
In file included from ./src/audio/macosx/SDL_coreaudio.c:34:
./src/audio/macosx/SDL_coreaudio.h:33: error: parse error before 'AudioUnit'
./src/audio/macosx/SDL_coreaudio.h:33: warning: no semicolon at end of struct or union
./src/audio/macosx/SDL_coreaudio.h:37: error: parse error before '}' token
./src/audio/macosx/SDL_coreaudio.c: In function 'Audio_CreateDevice':
./src/audio/macosx/SDL_coreaudio.c:67: error: dereferencing pointer to incomplete type
./src/audio/macosx/SDL_coreaudio.c:76: error: dereferencing pointer to incomplete type
./src/audio/macosx/SDL_coreaudio.c: At top level:
./src/audio/macosx/SDL_coreaudio.c:97: error: parse error before 'AudioUnitRenderActionFlags'
./src/audio/macosx/SDL_coreaudio.c: In function 'audioCallback':
./src/audio/macosx/SDL_coreaudio.c:103: error: 'inRefCon' undeclared (first use in this function)
./src/audio/macosx/SDL_coreaudio.c:103: error: (Each undeclared identifier is reported only once
./src/audio/macosx/SDL_coreaudio.c:103: error: for each function it appears in.)
./src/audio/macosx/SDL_coreaudio.c:105: error: 'AudioBuffer' undeclared (first use in this function)
./src/audio/macosx/SDL_coreaudio.c:105: error: 'abuf' undeclared (first use in this function)
./src/audio/macosx/SDL_coreaudio.c:111: error: 'ioData' undeclared (first use in this function)
./src/audio/macosx/SDL_coreaudio.c:131: error: dereferencing pointer to incomplete type
./src/audio/macosx/SDL_coreaudio.c:131: error: dereferencing pointer to incomplete type
./src/audio/macosx/SDL_coreaudio.c:133: error: dereferencing pointer to incomplete type
./src/audio/macosx/SDL_coreaudio.c:133: error: dereferencing pointer to incomplete type
./src/audio/macosx/SDL_coreaudio.c:136: error: dereferencing pointer to incomplete type
./src/audio/macosx/SDL_coreaudio.c:136: error: dereferencing pointer to incomplete type
./src/audio/macosx/SDL_coreaudio.c:138: error: dereferencing pointer to incomplete type
./src/audio/macosx/SDL_coreaudio.c:141: error: dereferencing pointer to incomplete type
./src/audio/macosx/SDL_coreaudio.c:141: error: dereferencing pointer to incomplete type
./src/audio/macosx/SDL_coreaudio.c:144: error: dereferencing pointer to incomplete type
./src/audio/macosx/SDL_coreaudio.c:144: error: dereferencing pointer to incomplete type
./src/audio/macosx/SDL_coreaudio.c:147: error: dereferencing pointer to incomplete type
./src/audio/macosx/SDL_coreaudio.c: In function 'Core_CloseAudio':
./src/audio/macosx/SDL_coreaudio.c:173: error: storage size of 'callback' isn't known
./src/audio/macosx/SDL_coreaudio.c:176: error: dereferencing pointer to incomplete type
./src/audio/macosx/SDL_coreaudio.c:185: error: dereferencing pointer to incomplete type
./src/audio/macosx/SDL_coreaudio.c:186: error: 'kAudioUnitProperty_SetRenderCallback' undeclared (first use in this function)
./src/audio/macosx/SDL_coreaudio.c:187: error: 'kAudioUnitScope_Input' undeclared (first use in this function)
./src/audio/macosx/SDL_coreaudio.c:196: error: dereferencing pointer to incomplete type
./src/audio/macosx/SDL_coreaudio.c:202: error: dereferencing pointer to incomplete type
./src/audio/macosx/SDL_coreaudio.c: In function 'Core_OpenAudio':
./src/audio/macosx/SDL_coreaudio.c:217: error: storage size of 'callback' isn't known
./src/audio/macosx/SDL_coreaudio.c:218: error: 'AudioStreamBasicDescription' undeclared (first use in this function)
./src/audio/macosx/SDL_coreaudio.c:218: error: parse error before 'requestedDesc'
./src/audio/macosx/SDL_coreaudio.c:221: error: 'requestedDesc' undeclared (first use in this function)
./src/audio/macosx/SDL_coreaudio.c:221: error: 'kAudioFormatLinearPCM' undeclared (first use in this function)
./src/audio/macosx/SDL_coreaudio.c:222: error: 'kLinearPCMFormatFlagIsPacked' undeclared (first use in this function)
./src/audio/macosx/SDL_coreaudio.c:228: error: 'kLinearPCMFormatFlagIsSignedInteger' undeclared (first use in this function)
./src/audio/macosx/SDL_coreaudio.c:230: error: 'kLinearPCMFormatFlagIsBigEndian' undeclared (first use in this function)
./src/audio/macosx/SDL_coreaudio.c:238: error: 'kAudioUnitType_Output' undeclared (first use in this function)
./src/audio/macosx/SDL_coreaudio.c:239: error: 'kAudioUnitSubType_DefaultOutput' undeclared (first use in this function)
./src/audio/macosx/SDL_coreaudio.c:240: error: 'kAudioUnitManufacturer_Apple' undeclared (first use in this function)
./src/audio/macosx/SDL_coreaudio.c:251: error: dereferencing pointer to incomplete type
./src/audio/macosx/SDL_coreaudio.c:254: error: dereferencing pointer to incomplete type
./src/audio/macosx/SDL_coreaudio.c:258: error: dereferencing pointer to incomplete type
./src/audio/macosx/SDL_coreaudio.c:259: error: 'kAudioUnitProperty_StreamFormat' undeclared (first use in this function)
./src/audio/macosx/SDL_coreaudio.c:260: error: 'kAudioUnitScope_Input' undeclared (first use in this function)
./src/audio/macosx/SDL_coreaudio.c:269: error: dereferencing pointer to incomplete type
./src/audio/macosx/SDL_coreaudio.c:270: error: 'kAudioUnitProperty_SetRenderCallback' undeclared (first use in this function)
./src/audio/macosx/SDL_coreaudio.c:281: error: dereferencing pointer to incomplete type
./src/audio/macosx/SDL_coreaudio.c:281: error: dereferencing pointer to incomplete type
./src/audio/macosx/SDL_coreaudio.c:282: error: dereferencing pointer to incomplete type
./src/audio/macosx/SDL_coreaudio.c:282: error: dereferencing pointer to incomplete type
./src/audio/macosx/SDL_coreaudio.c:285: error: dereferencing pointer to incomplete type
make: *** [build/SDL_coreaudio.lo] Error 1
Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_libsdl/work/SDL-1.2.14" && /usr/bin/make -j1 all " returned error 2
DEBUG: Backtrace: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_libsdl/work/SDL-1.2.14" && /usr/bin/make -j1 all " returned error 2
    while executing
"command_exec build"
    (procedure "portbuild::build_main" line 9)
    invoked from within
"$procedure $targetname"
Warning: the following items did not execute (for libsdl): org.macports.activate org.macports.build org.macports.destroot org.macports.install
Error: The following dependencies failed to build: libsdl libtheora libvorbis schroedinger orc liboil x264
Error: Status 1 encountered during processing.
To report a bug, see <http://guide.macports.org/#project.tickets>
freds-mac-mini:~ fred$