version:1 :debug:main epoch: in tree: 0 installed: 0 :debug:main pkgconfig 0.25_1 exists in the ports tree :debug:main pkgconfig 0.25_1 is the latest installed :debug:main pkgconfig 0.25_1 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! pkgconfig 0.25_1 >= pkgconfig 0.25_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main intltool 0.40.6_0 exists in the ports tree :debug:main intltool 0.40.6_0 is the latest installed :debug:main intltool 0.40.6_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/intltool :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main only one arch supported, so not adding the default universal variant :debug:main No need to upgrade! intltool 0.40.6_0 >= intltool 0.40.6_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main expat 2.0.1_0 exists in the ports tree :debug:main expat 2.0.1_0 is the latest installed :debug:main expat 2.0.1_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main perl5 5.8.9_0 exists in the ports tree :debug:main perl5 5.8.9_0 is the latest installed :debug:main perl5 5.8.9_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main universal_variant is false, so not adding the default universal variant :debug:main No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main perl5.8 5.8.9_3 exists in the ports tree :debug:main perl5.8 5.8.9_3 is the latest installed :debug:main perl5.8 5.8.9_3 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8 :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3 :debug:main epoch: in tree: 0 installed: 0 :debug:main p5-xml-parser 2.36_0 exists in the ports tree :debug:main p5-xml-parser 2.36_0 is the latest installed :debug:main p5-xml-parser 2.36_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-xml-parser :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl :debug:main Re-registering default for configure.universal_args :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! p5-xml-parser 2.36_0 >= p5-xml-parser 2.36_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main p5-getopt-long 2.38_0 exists in the ports tree :debug:main p5-getopt-long 2.38_0 is the latest installed :debug:main p5-getopt-long 2.38_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-getopt-long :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl :debug:main Re-registering default for configure.universal_args :debug:main only one arch supported, so not adding the default universal variant :debug:main No need to upgrade! p5-getopt-long 2.38_0 >= p5-getopt-long 2.38_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main p5-pathtools 3.31_0 exists in the ports tree :debug:main p5-pathtools 3.31_0 is the latest installed :debug:main p5-pathtools 3.31_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-pathtools :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl :debug:main Re-registering default for configure.universal_args :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! p5-pathtools 3.31_0 >= p5-pathtools 3.31_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main p5-scalar-list-utils 1.23_0 exists in the ports tree :debug:main p5-scalar-list-utils 1.23_0 is the latest installed :debug:main p5-scalar-list-utils 1.23_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-scalar-list-utils :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl :debug:main Re-registering default for configure.universal_args :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! p5-scalar-list-utils 1.23_0 >= p5-scalar-list-utils 1.23_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main gconf 2.28.1_0 exists in the ports tree :debug:main gconf 2.28.1_0 is the latest installed :debug:main gconf 2.28.1_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gconf :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! gconf 2.28.1_0 >= gconf 2.28.1_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main gtk2 2.20.1_0 exists in the ports tree :debug:main gtk2 2.20.1_0 +x11 is the latest installed :debug:main gtk2 2.20.1_0 +x11 is active :debug:main Merging existing variants '+x11' into variants :debug:main new fully merged portvariants: x11 + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/gtk2 :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl :debug:main universal variant already exists, so not adding the default one :debug:main Executing variant x11 provides x11 :debug:main No need to upgrade! gtk2 2.20.1_0 >= gtk2 2.20.1_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main tiff 3.9.4_0 exists in the ports tree :debug:main tiff 3.9.4_0 is the latest installed :debug:main tiff 3.9.4_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! tiff 3.9.4_0 >= tiff 3.9.4_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main jpeg 8b_0 exists in the ports tree :debug:main jpeg 8b_0 is the latest installed :debug:main jpeg 8b_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! jpeg 8b_0 >= jpeg 8b_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main zlib 1.2.5_0 exists in the ports tree :debug:main zlib 1.2.5_0 is the latest installed :debug:main zlib 1.2.5_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main jasper 1.900.1_7 exists in the ports tree :debug:main jasper 1.900.1_7 is the latest installed :debug:main jasper 1.900.1_7 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jasper :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! jasper 1.900.1_7 >= jasper 1.900.1_7 :debug:main epoch: in tree: 0 installed: 0 :debug:main atk 1.30.0_0 exists in the ports tree :debug:main atk 1.30.0_0 is the latest installed :debug:main atk 1.30.0_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/atk :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! atk 1.30.0_0 >= atk 1.30.0_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main glib2 2.24.2_0 exists in the ports tree :debug:main glib2 2.24.2_0 is the latest installed :debug:main glib2 2.24.2_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/glib2 :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! glib2 2.24.2_0 >= glib2 2.24.2_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main gettext 0.18.1.1_2 exists in the ports tree :debug:main gettext 0.18.1.1_2 is the latest installed :debug:main gettext 0.18.1.1_2 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2 :debug:main epoch: in tree: 0 installed: 0 :debug:main libiconv 1.13.1_0 exists in the ports tree :debug:main libiconv 1.13.1_0 is the latest installed :debug:main libiconv 1.13.1_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main ncurses 5.7_0 exists in the ports tree :debug:main ncurses 5.7_0 is the latest installed :debug:main ncurses 5.7_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main ncursesw 5.7_0 exists in the ports tree :debug:main ncursesw 5.7_0 is the latest installed :debug:main ncursesw 5.7_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0 :debug:main Found Dependency: path: /usr/bin filename: python regex: ^python$ :debug:main python_select is *not* installed by MacPorts :debug:main Searching for dependency: python_select :debug:main Didn't find receipt, going to depspec regex for: python_select :debug:main Found Dependency: path: /usr/bin filename: python regex: ^python$ :debug:main python_select not installed, soft dependency satisfied :debug:main epoch: in tree: 1 installed: 1 :debug:main pango 1.24.5_0 exists in the ports tree :debug:main pango 1.24.5_0 is the latest installed :debug:main pango 1.24.5_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/pango :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! pango 1.24.5_0 >= pango 1.24.5_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main Xft2 2.1.14_0 exists in the ports tree :debug:main Xft2 2.1.14_0 is the latest installed :debug:main Xft2 2.1.14_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2 :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! Xft2 2.1.14_0 >= Xft2 2.1.14_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xrender 0.9.6_0 exists in the ports tree :debug:main xrender 0.9.6_0 is the latest installed :debug:main xrender 0.9.6_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! xrender 0.9.6_0 >= xrender 0.9.6_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libX11 1.3.5_0 exists in the ports tree :debug:main xorg-libX11 1.3.5_0 is the latest installed :debug:main xorg-libX11 1.3.5_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11 :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! xorg-libX11 1.3.5_0 >= xorg-libX11 1.3.5_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libXdmcp 1.0.3_0 exists in the ports tree :debug:main xorg-libXdmcp 1.0.3_0 is the latest installed :debug:main xorg-libXdmcp 1.0.3_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! xorg-libXdmcp 1.0.3_0 >= xorg-libXdmcp 1.0.3_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libXau 1.0.6_0 exists in the ports tree :debug:main xorg-libXau 1.0.6_0 is the latest installed :debug:main xorg-libXau 1.0.6_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! xorg-libXau 1.0.6_0 >= xorg-libXau 1.0.6_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-xproto 7.0.18_0 exists in the ports tree :debug:main xorg-xproto 7.0.18_0 is the latest installed :debug:main xorg-xproto 7.0.18_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main only one arch supported, so not adding the default universal variant :debug:main No need to upgrade! xorg-xproto 7.0.18_0 >= xorg-xproto 7.0.18_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-kbproto 1.0.5_0 exists in the ports tree :debug:main xorg-kbproto 1.0.5_0 is the latest installed :debug:main xorg-kbproto 1.0.5_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main only one arch supported, so not adding the default universal variant :debug:main No need to upgrade! xorg-kbproto 1.0.5_0 >= xorg-kbproto 1.0.5_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-renderproto 0.11.1_0 exists in the ports tree :debug:main xorg-renderproto 0.11.1_0 is the latest installed :debug:main xorg-renderproto 0.11.1_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-renderproto :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main only one arch supported, so not adding the default universal variant :debug:main No need to upgrade! xorg-renderproto 0.11.1_0 >= xorg-renderproto 0.11.1_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main freetype 2.4.2_0 exists in the ports tree :debug:main freetype 2.4.2_0 is the latest installed :debug:main freetype 2.4.2_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! freetype 2.4.2_0 >= freetype 2.4.2_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main fontconfig 2.8.0_0 exists in the ports tree :debug:main fontconfig 2.8.0_0 is the latest installed :debug:main fontconfig 2.8.0_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! fontconfig 2.8.0_0 >= fontconfig 2.8.0_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main cairo 1.8.10_0 exists in the ports tree :debug:main cairo 1.8.10_0 is the latest installed :debug:main cairo 1.8.10_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/cairo :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! cairo 1.8.10_0 >= cairo 1.8.10_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main libpixman 0.18.4_0 exists in the ports tree :debug:main libpixman 0.18.4_0 is the latest installed :debug:main libpixman 0.18.4_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpixman :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! libpixman 0.18.4_0 >= libpixman 0.18.4_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main libpng 1.2.44_0 exists in the ports tree :debug:main libpng 1.2.44_0 is the latest installed :debug:main libpng 1.2.44_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! libpng 1.2.44_0 >= libpng 1.2.44_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libXi 1.3.2_0 exists in the ports tree :debug:main xorg-libXi 1.3.2_0 is the latest installed :debug:main xorg-libXi 1.3.2_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXi :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! xorg-libXi 1.3.2_0 >= xorg-libXi 1.3.2_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libXext 1.1.2_0 exists in the ports tree :debug:main xorg-libXext 1.1.2_0 is the latest installed :debug:main xorg-libXext 1.1.2_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXext :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! xorg-libXext 1.1.2_0 >= xorg-libXext 1.1.2_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-xextproto 7.1.2_0 exists in the ports tree :debug:main xorg-xextproto 7.1.2_0 is the latest installed :debug:main xorg-xextproto 7.1.2_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main only one arch supported, so not adding the default universal variant :debug:main No need to upgrade! xorg-xextproto 7.1.2_0 >= xorg-xextproto 7.1.2_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-inputproto 2.0_0 exists in the ports tree :debug:main xorg-inputproto 2.0_0 is the latest installed :debug:main xorg-inputproto 2.0_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-inputproto :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main only one arch supported, so not adding the default universal variant :debug:main No need to upgrade! xorg-inputproto 2.0_0 >= xorg-inputproto 2.0_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libXrandr 1.3.0_1 exists in the ports tree :debug:main xorg-libXrandr 1.3.0_1 is the latest installed :debug:main xorg-libXrandr 1.3.0_1 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXrandr :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! xorg-libXrandr 1.3.0_1 >= xorg-libXrandr 1.3.0_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-randrproto 1.3.1_0 exists in the ports tree :debug:main xorg-randrproto 1.3.1_0 is the latest installed :debug:main xorg-randrproto 1.3.1_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-randrproto :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main only one arch supported, so not adding the default universal variant :debug:main No need to upgrade! xorg-randrproto 1.3.1_0 >= xorg-randrproto 1.3.1_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libXcursor 1.1.10_0 exists in the ports tree :debug:main xorg-libXcursor 1.1.10_0 is the latest installed :debug:main xorg-libXcursor 1.1.10_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXcursor :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! xorg-libXcursor 1.1.10_0 >= xorg-libXcursor 1.1.10_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libXfixes 4.0.5_0 exists in the ports tree :debug:main xorg-libXfixes 4.0.5_0 is the latest installed :debug:main xorg-libXfixes 4.0.5_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXfixes :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! xorg-libXfixes 4.0.5_0 >= xorg-libXfixes 4.0.5_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-fixesproto 4.1.1_0 exists in the ports tree :debug:main xorg-fixesproto 4.1.1_0 is the latest installed :debug:main xorg-fixesproto 4.1.1_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-fixesproto :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main only one arch supported, so not adding the default universal variant :debug:main No need to upgrade! xorg-fixesproto 4.1.1_0 >= xorg-fixesproto 4.1.1_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libXinerama 1.1_0 exists in the ports tree :debug:main xorg-libXinerama 1.1_0 is the latest installed :debug:main xorg-libXinerama 1.1_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXinerama :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! xorg-libXinerama 1.1_0 >= xorg-libXinerama 1.1_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-xineramaproto 1.2_0 exists in the ports tree :debug:main xorg-xineramaproto 1.2_0 is the latest installed :debug:main xorg-xineramaproto 1.2_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xineramaproto :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main only one arch supported, so not adding the default universal variant :debug:main No need to upgrade! xorg-xineramaproto 1.2_0 >= xorg-xineramaproto 1.2_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libXdamage 1.1.3_0 exists in the ports tree :debug:main xorg-libXdamage 1.1.3_0 is the latest installed :debug:main xorg-libXdamage 1.1.3_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdamage :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! xorg-libXdamage 1.1.3_0 >= xorg-libXdamage 1.1.3_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-damageproto 1.2.0_0 exists in the ports tree :debug:main xorg-damageproto 1.2.0_0 is the latest installed :debug:main xorg-damageproto 1.2.0_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-damageproto :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main only one arch supported, so not adding the default universal variant :debug:main No need to upgrade! xorg-damageproto 1.2.0_0 >= xorg-damageproto 1.2.0_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-libXcomposite 0.4.2_0 exists in the ports tree :debug:main xorg-libXcomposite 0.4.2_0 is the latest installed :debug:main xorg-libXcomposite 0.4.2_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXcomposite :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! xorg-libXcomposite 0.4.2_0 >= xorg-libXcomposite 0.4.2_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xorg-compositeproto 0.4.1_0 exists in the ports tree :debug:main xorg-compositeproto 0.4.1_0 is the latest installed :debug:main xorg-compositeproto 0.4.1_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-compositeproto :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main only one arch supported, so not adding the default universal variant :debug:main No need to upgrade! xorg-compositeproto 0.4.1_0 >= xorg-compositeproto 0.4.1_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main shared-mime-info 0.71_0 exists in the ports tree :debug:main shared-mime-info 0.71_0 is the latest installed :debug:main shared-mime-info 0.71_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/shared-mime-info :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! shared-mime-info 0.71_0 >= shared-mime-info 0.71_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main libxml2 2.7.7_0 exists in the ports tree :debug:main libxml2 2.7.7_0 is the latest installed :debug:main libxml2 2.7.7_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2 :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! libxml2 2.7.7_0 >= libxml2 2.7.7_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main dbus-glib 0.86_1 exists in the ports tree :debug:main dbus-glib 0.86_1 is the latest installed :debug:main dbus-glib 0.86_1 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/dbus-glib :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! dbus-glib 0.86_1 >= dbus-glib 0.86_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main dbus 1.2.24_1 exists in the ports tree :debug:main dbus 1.2.24_1 is the latest installed :debug:main dbus 1.2.24_1 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/dbus :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! dbus 1.2.24_1 >= dbus 1.2.24_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main policykit 0.96_0 exists in the ports tree :debug:main policykit 0.96_0 is the latest installed :debug:main policykit 0.96_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/security/policykit :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! policykit 0.96_0 >= policykit 0.96_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main eggdbus 0.6_0 exists in the ports tree :debug:main eggdbus 0.6_0 is the latest installed :debug:main eggdbus 0.6_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/eggdbus :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! eggdbus 0.6_0 >= eggdbus 0.6_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main libxslt 1.1.26_0 exists in the ports tree :debug:main libxslt 1.1.26_0 is the latest installed :debug:main libxslt 1.1.26_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxslt :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! libxslt 1.1.26_0 >= libxslt 1.1.26_0 :debug:main epoch: in tree: 1 installed: 1 :debug:main openssl 1.0.0a_0 exists in the ports tree :debug:main openssl 1.0.0a_0 is the latest installed :debug:main openssl 1.0.0a_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! openssl 1.0.0a_0 >= openssl 1.0.0a_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main orbit2 2.14.18_0 exists in the ports tree :debug:main orbit2 2.14.18_0 is the latest installed :debug:main orbit2 2.14.18_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/orbit2 :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! orbit2 2.14.18_0 >= orbit2 2.14.18_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main libidl 0.8.14_0 exists in the ports tree :debug:main libidl 0.8.14_0 is the latest installed :debug:main libidl 0.8.14_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libidl :debug:main OS darwin/9.8.0 (Mac OS X 10.5) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! libidl 0.8.14_0 >= libidl 0.8.14_0 :msg:main ---> Computing dependencies for policykit-gnome:info:main .:debug:main Searching for dependency: pkgconfig :debug:main Found Dependency: receipt exists for pkgconfig :debug:main Searching for dependency: intltool :debug:main Found Dependency: receipt exists for intltool :debug:main Searching for dependency: p5-xml-parser :debug:main Found Dependency: receipt exists for p5-xml-parser :debug:main Searching for dependency: gconf :debug:main Found Dependency: receipt exists for gconf :debug:main Searching for dependency: policykit :debug:main Found Dependency: receipt exists for policykit :msg:main :debug:main Executing org.macports.main (policykit-gnome) :debug:main Skipping completed org.macports.fetch (policykit-gnome) :debug:main Skipping completed org.macports.checksum (policykit-gnome) :debug:main setting option extract.cmd to /usr/bin/bzip2 :debug:main Skipping completed org.macports.extract (policykit-gnome) :debug:main Skipping completed org.macports.patch (policykit-gnome) :msg:main ---> Configuring policykit-gnome :debug:main Using compiler 'Mac OS X gcc 4.0' :debug:configure configure phase started at Mon Aug 16 19:18:44 MDT 2010 :debug:configure Executing org.macports.configure (policykit-gnome) :debug:configure Environment: CPATH='/opt/local/include' CFLAGS='-pipe -O2 -arch i386' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-pipe -O2 -arch i386' LIBRARY_PATH='/opt/local/lib' MACOSX_DEPLOYMENT_TARGET='10.5' CXX='/usr/bin/g++-4.0' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_policykit-gnome/work/.CC_PRINT_OPTIONS' F90FLAGS='-pipe -O2 -m32' LDFLAGS='-L/opt/local/lib -arch i386' OBJC='/usr/bin/gcc-4.0' FCFLAGS='-pipe -O2 -m32' INSTALL='/usr/bin/install -c' OBJCFLAGS='-pipe -O2 -arch i386' FFLAGS='-pipe -O2 -m32' CC_PRINT_OPTIONS='YES' CC='/usr/bin/gcc-4.0' :debug:configure Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_policykit-gnome/work/PolicyKit-gnome-0.9.2" && ./configure --prefix=/opt/local --disable-scrollkeeper --disable-schemas-install --disable-gtk-doc' :info:configure checking for a BSD-compatible install... /usr/bin/install -c :info:configure checking whether build environment is sane... yes :info:configure checking for a thread-safe mkdir -p... ./install-sh -c -d :info:configure checking for gawk... no :info:configure checking for mawk... no :info:configure checking for nawk... no :info:configure checking for awk... awk :info:configure checking whether make sets $(MAKE)... yes :info:configure checking whether to enable maintainer-specific portions of Makefiles... no :info:configure checking for gcc... /usr/bin/gcc-4.0 :info:configure checking for C compiler default output file name... a.out :info:configure checking whether the C compiler works... yes :info:configure checking whether we are cross compiling... no :info:configure checking for suffix of executables... :info:configure checking for suffix of object files... o :info:configure checking whether we are using the GNU C compiler... yes :info:configure checking whether /usr/bin/gcc-4.0 accepts -g... yes :info:configure checking for /usr/bin/gcc-4.0 option to accept ISO C89... none needed :info:configure checking for style of include used by make... GNU :info:configure checking dependency style of /usr/bin/gcc-4.0... gcc3 :info:configure checking for library containing strerror... none required :info:configure checking how to run the C preprocessor... /usr/bin/gcc-4.0 -E :info:configure checking for grep that handles long lines and -e... /usr/bin/grep :info:configure checking for egrep... /usr/bin/grep -E :info:configure checking for ANSI C header files... yes :info:configure checking build system type... i386-apple-darwin9.8.0 :info:configure checking host system type... i386-apple-darwin9.8.0 :info:configure checking for a sed that does not truncate output... /usr/bin/sed :info:configure checking for ld used by /usr/bin/gcc-4.0... /usr/libexec/gcc/i686-apple-darwin9/4.0.1/ld :info:configure checking if the linker (/usr/libexec/gcc/i686-apple-darwin9/4.0.1/ld) is GNU ld... no :info:configure checking for /usr/libexec/gcc/i686-apple-darwin9/4.0.1/ld option to reload object files... -r :info:configure checking for BSD-compatible nm... /usr/bin/nm -p :info:configure checking whether ln -s works... yes :info:configure checking how to recognize dependent libraries... pass_all :info:configure checking for sys/types.h... yes :info:configure checking for sys/stat.h... yes :info:configure checking for stdlib.h... yes :info:configure checking for string.h... yes :info:configure checking for memory.h... yes :info:configure checking for strings.h... yes :info:configure checking for inttypes.h... yes :info:configure checking for stdint.h... yes :info:configure checking for unistd.h... yes :info:configure checking dlfcn.h usability... yes :info:configure checking dlfcn.h presence... yes :info:configure checking for dlfcn.h... yes :info:configure checking whether we are using the GNU C++ compiler... yes :info:configure checking whether /usr/bin/g++-4.0 accepts -g... yes :info:configure checking dependency style of /usr/bin/g++-4.0... gcc3 :info:configure checking how to run the C++ preprocessor... /usr/bin/g++-4.0 -E :info:configure checking for g77... no :info:configure checking for xlf... no :info:configure checking for f77... no :info:configure checking for frt... no :info:configure checking for pgf77... no :info:configure checking for cf77... no :info:configure checking for fort77... no :info:configure checking for fl32... no :info:configure checking for af77... no :info:configure checking for xlf90... no :info:configure checking for f90... no :info:configure checking for pgf90... no :info:configure checking for pghpf... no :info:configure checking for epcf90... no :info:configure checking for gfortran... no :info:configure checking for g95... no :info:configure checking for xlf95... no :info:configure checking for f95... no :info:configure checking for fort... no :info:configure checking for ifort... no :info:configure checking for ifc... no :info:configure checking for efc... no :info:configure checking for pgf95... no :info:configure checking for lf95... no :info:configure checking for ftn... no :info:configure checking whether we are using the GNU Fortran 77 compiler... no :info:configure checking whether accepts -g... no :info:configure checking the maximum length of command line arguments... 196608 :info:configure checking command to parse /usr/bin/nm -p output from /usr/bin/gcc-4.0 object... ok :info:configure checking for objdir... .libs :info:configure checking for ar... ar :info:configure checking for ranlib... ranlib :info:configure checking for strip... strip :info:configure checking for dsymutil... dsymutil :info:configure checking for nmedit... nmedit :info:configure checking for -single_module linker flag... yes :info:configure checking for -exported_symbols_list linker flag... yes :info:configure checking if /usr/bin/gcc-4.0 supports -fno-rtti -fno-exceptions... no :info:configure checking for /usr/bin/gcc-4.0 option to produce PIC... -fno-common :info:configure checking if /usr/bin/gcc-4.0 PIC flag -fno-common works... yes :info:configure checking if /usr/bin/gcc-4.0 static flag -static works... no :info:configure checking if /usr/bin/gcc-4.0 supports -c -o file.o... yes :info:configure checking whether the /usr/bin/gcc-4.0 linker (/usr/libexec/gcc/i686-apple-darwin9/4.0.1/ld) supports shared libraries... yes :info:configure checking dynamic linker characteristics... darwin9.8.0 dyld :info:configure checking how to hardcode library paths into programs... immediate :info:configure checking whether stripping libraries is possible... yes :info:configure checking if libtool supports shared libraries... yes :info:configure checking whether to build shared libraries... yes :info:configure checking whether to build static libraries... yes :info:configure configure: creating libtool :info:configure appending configuration tag "CXX" to libtool :info:configure checking for ld used by /usr/bin/g++-4.0... /usr/libexec/gcc/i686-apple-darwin9/4.0.1/ld :info:configure checking if the linker (/usr/libexec/gcc/i686-apple-darwin9/4.0.1/ld) is GNU ld... no :info:configure checking whether the /usr/bin/g++-4.0 linker (/usr/libexec/gcc/i686-apple-darwin9/4.0.1/ld) supports shared libraries... yes :info:configure checking for /usr/bin/g++-4.0 option to produce PIC... -fno-common :info:configure checking if /usr/bin/g++-4.0 PIC flag -fno-common works... yes :info:configure checking if /usr/bin/g++-4.0 static flag -static works... no :info:configure checking if /usr/bin/g++-4.0 supports -c -o file.o... yes :info:configure checking whether the /usr/bin/g++-4.0 linker (/usr/libexec/gcc/i686-apple-darwin9/4.0.1/ld) supports shared libraries... yes :info:configure checking dynamic linker characteristics... darwin9.8.0 dyld :info:configure (cached) (cached) checking how to hardcode library paths into programs... immediate :info:configure appending configuration tag "F77" to libtool :info:configure checking for pkg-config... /opt/local/bin/pkg-config :info:configure checking pkg-config is at least version 0.9.0... yes :info:configure checking whether gcc understands -Wno-sign-compare... yes :info:configure checking what warning flags to pass to the C compiler... -Wall -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wno-sign-compare :info:configure checking what language compliance flags to pass to the C compiler... :info:configure checking whether to build gtk-doc documentation... no :info:configure checking for gtkdoc-check... /opt/local/bin/gtkdoc-check :info:configure checking for GTK... yes :info:configure checking for GCONF... yes :info:configure checking for DBUS_GLIB... yes :info:configure checking for POLKIT_DBUS... configure: error: Package requirements (polkit-dbus >= 0.9) were not met: :info:configure :info:configure No package 'polkit-dbus' found :info:configure :info:configure Consider adjusting the PKG_CONFIG_PATH environment variable if you :info:configure installed software in a non-standard prefix. :info:configure :info:configure Alternatively, you may set the environment variables POLKIT_DBUS_CFLAGS :info:configure and POLKIT_DBUS_LIBS to avoid the need to call pkg-config. :info:configure See the pkg-config man page for more details. :info:configure :info:configure shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_policykit-gnome/work/PolicyKit-gnome-0.9.2" && ./configure --prefix=/opt/local --disable-scrollkeeper --disable-schemas-install --disable-gtk-doc " returned error 1 :error:configure Target org.macports.configure returned: configure failure: shell command failed :debug:configure Backtrace: configure failure: shell command failed while executing "$procedure $targetname" :info:configure Warning: the following items did not execute (for policykit-gnome): org.macports.activate org.macports.configure org.macports.build org.macports.destroot org.macports.install :notice:configure Log for policykit-gnome is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_policykit-gnome/main.log