DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py-matplotlib DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python-1.0.tcl DEBUG: Re-registering default for build.cmd DEBUG: Re-registering default for destroot.cmd DEBUG: Re-registering default for destroot.destdir DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Executing variant tkinter provides tkinter DEBUG: Attempting ln -sf /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py-matplotlib/py27-matplotlib/work /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py-matplotlib/work DEBUG: Starting logging for py27-matplotlib DEBUG: epoch: in tree: 2 installed: 2 DEBUG: python27 2.7.2_1 exists in the ports tree DEBUG: python27 2.7.2_1 +universal is the latest installed DEBUG: python27 2.7.2_1 +universal is active DEBUG: Merging existing variants '+universal' into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python27 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! python27 2.7.2_1 >= python27 2.7.2_1 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gettext 0.18.1.1_2 exists in the ports tree DEBUG: gettext 0.18.1.1_2 +universal is the latest installed DEBUG: gettext 0.18.1.1_2 +universal is active DEBUG: Merging existing variants '+universal' into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libiconv 1.14_0 exists in the ports tree DEBUG: libiconv 1.14_0 +universal is the latest installed DEBUG: libiconv 1.14_0 +universal is active DEBUG: Merging existing variants '+universal' into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: ncurses 5.9_1 exists in the ports tree DEBUG: ncurses 5.9_1 +universal is the latest installed DEBUG: ncurses 5.9_1 +universal is active DEBUG: Merging existing variants '+universal' into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: expat 2.0.1_1 exists in the ports tree DEBUG: expat 2.0.1_1 +universal is the latest installed DEBUG: expat 2.0.1_1 +universal is active DEBUG: Merging existing variants '+universal' into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: zlib 1.2.5_0 exists in the ports tree DEBUG: zlib 1.2.5_0 is the latest installed DEBUG: zlib 1.2.5_0 +universal is active DEBUG: Merging existing variants '+universal' into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0 DEBUG: epoch: in tree: 1 installed: 1 DEBUG: openssl 1.0.0e_1 exists in the ports tree DEBUG: openssl 1.0.0e_1 +universal is the latest installed DEBUG: openssl 1.0.0e_1 +universal is active DEBUG: Merging existing variants '+universal' into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! openssl 1.0.0e_1 >= openssl 1.0.0e_1 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: sqlite3 3.7.8_1 exists in the ports tree DEBUG: sqlite3 3.7.8_1 +universal is the latest installed DEBUG: sqlite3 3.7.8_1 +universal is active DEBUG: Merging existing variants '+universal' into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! sqlite3 3.7.8_1 >= sqlite3 3.7.8_1 DEBUG: epoch: in tree: 20090923 installed: 20090923 DEBUG: libedit 20110802-3.0_0 exists in the ports tree DEBUG: libedit 20110802-3.0_0 +universal is the latest installed DEBUG: libedit 20110802-3.0_0 +universal is active DEBUG: Merging existing variants '+universal' into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libedit DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! libedit 20110802-3.0_0 >= libedit 20110802-3.0_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: db46 4.6.21_6 exists in the ports tree DEBUG: db46 4.6.21_6 is the latest installed DEBUG: db46 4.6.21_6 +java+universal is active DEBUG: Merging existing variants '+java+universal' into variants DEBUG: new fully merged portvariants: universal + java + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Executing variant universal provides universal DEBUG: Executing variant java provides java DEBUG: No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gdbm 1.9.1_0 exists in the ports tree DEBUG: gdbm 1.9.1_0 +universal is the latest installed DEBUG: gdbm 1.9.1_0 +universal is active DEBUG: Merging existing variants '+universal' into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! gdbm 1.9.1_0 >= gdbm 1.9.1_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: bzip2 1.0.6_0 exists in the ports tree DEBUG: bzip2 1.0.6_0 is the latest installed DEBUG: bzip2 1.0.6_0 +universal is active DEBUG: Merging existing variants '+universal' into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: readline 6.2.000_0 exists in the ports tree DEBUG: readline 6.2.000_0 is the latest installed DEBUG: readline 6.2.000_0 +universal is active DEBUG: Merging existing variants '+universal' into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! readline 6.2.000_0 >= readline 6.2.000_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: python_select 0.3_1 exists in the ports tree DEBUG: python_select 0.3_1 is the latest installed DEBUG: python_select 0.3_1 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/python_select DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl DEBUG: universal_variant is false, so not adding the default universal variant DEBUG: No need to upgrade! python_select 0.3_1 >= python_select 0.3_1 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: py27-dateutil 1.5_1 exists in the ports tree DEBUG: py27-dateutil 1.5_1 is the latest installed DEBUG: py27-dateutil 1.5_1 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py-dateutil DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python-1.0.tcl DEBUG: Re-registering default for build.cmd DEBUG: Re-registering default for destroot.cmd DEBUG: Re-registering default for destroot.destdir DEBUG: only one arch supported, so not adding the default universal variant DEBUG: No need to upgrade! py27-dateutil 1.5_1 >= py27-dateutil 1.5_1 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: py27-tz 2011k_0 exists in the ports tree DEBUG: py27-tz 2011k_0 is the latest installed DEBUG: py27-tz 2011k_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py-tz DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python-1.0.tcl DEBUG: Re-registering default for build.cmd DEBUG: Re-registering default for destroot.cmd DEBUG: Re-registering default for destroot.destdir DEBUG: only one arch supported, so not adding the default universal variant DEBUG: No need to upgrade! py27-tz 2011k_0 >= py27-tz 2011k_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: py27-distribute 0.6.24_0 exists in the ports tree DEBUG: py27-distribute 0.6.24_0 is the latest installed DEBUG: py27-distribute 0.6.24_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py-distribute DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python-1.0.tcl DEBUG: Re-registering default for build.cmd DEBUG: Re-registering default for destroot.cmd DEBUG: Re-registering default for destroot.destdir DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: No need to upgrade! py27-distribute 0.6.24_0 >= py27-distribute 0.6.24_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: py27-numpy 1.6.1_0 exists in the ports tree DEBUG: py27-numpy 1.6.1_0 is the latest installed DEBUG: py27-numpy 1.6.1_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py-numpy DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python-1.0.tcl DEBUG: Re-registering default for build.cmd DEBUG: Re-registering default for destroot.cmd DEBUG: Re-registering default for destroot.destdir DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: No need to upgrade! py27-numpy 1.6.1_0 >= py27-numpy 1.6.1_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: fftw-3 3.3_0 exists in the ports tree DEBUG: fftw-3 3.3_0 is the latest installed DEBUG: fftw-3 3.3_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/math/fftw-3 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: No need to upgrade! fftw-3 3.3_0 >= fftw-3 3.3_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: py27-nose 1.1.2_0 exists in the ports tree DEBUG: py27-nose 1.1.2_0 is the latest installed DEBUG: py27-nose 1.1.2_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py-nose DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python-1.0.tcl DEBUG: Re-registering default for build.cmd DEBUG: Re-registering default for destroot.cmd DEBUG: Re-registering default for destroot.destdir DEBUG: only one arch supported, so not adding the default universal variant DEBUG: No need to upgrade! py27-nose 1.1.2_0 >= py27-nose 1.1.2_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: py27-configobj 4.6.0_0 exists in the ports tree DEBUG: py27-configobj 4.6.0_0 is the latest installed DEBUG: py27-configobj 4.6.0_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py27-configobj DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python27-1.0.tcl DEBUG: only one arch supported, so not adding the default universal variant DEBUG: No need to upgrade! py27-configobj 4.6.0_0 >= py27-configobj 4.6.0_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: py27-pyobjc-cocoa 2.3_0 exists in the ports tree DEBUG: py27-pyobjc-cocoa 2.3_0 is the latest installed DEBUG: py27-pyobjc-cocoa 2.3_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py27-pyobjc-cocoa DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python27-1.0.tcl DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: No need to upgrade! py27-pyobjc-cocoa 2.3_0 >= py27-pyobjc-cocoa 2.3_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: py27-pyobjc 2.3_0 exists in the ports tree DEBUG: py27-pyobjc 2.3_0 is the latest installed DEBUG: py27-pyobjc 2.3_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py27-pyobjc DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python27-1.0.tcl DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: No need to upgrade! py27-pyobjc 2.3_0 >= py27-pyobjc 2.3_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: py27-py2app 0.6.3_1 exists in the ports tree DEBUG: py27-py2app 0.6.3_1 is the latest installed DEBUG: py27-py2app 0.6.3_1 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py-py2app DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python-1.0.tcl DEBUG: Re-registering default for build.cmd DEBUG: Re-registering default for destroot.cmd DEBUG: Re-registering default for destroot.destdir DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: No need to upgrade! py27-py2app 0.6.3_1 >= py27-py2app 0.6.3_1 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: py27-macholib 1.4.2_0 exists in the ports tree DEBUG: py27-macholib 1.4.2_0 is the latest installed DEBUG: py27-macholib 1.4.2_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py-macholib DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python-1.0.tcl DEBUG: Re-registering default for build.cmd DEBUG: Re-registering default for destroot.cmd DEBUG: Re-registering default for destroot.destdir DEBUG: only one arch supported, so not adding the default universal variant DEBUG: No need to upgrade! py27-macholib 1.4.2_0 >= py27-macholib 1.4.2_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: py27-modulegraph 0.9.1_0 exists in the ports tree DEBUG: py27-modulegraph 0.9.1_0 is the latest installed DEBUG: py27-modulegraph 0.9.1_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py-modulegraph DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python-1.0.tcl DEBUG: Re-registering default for build.cmd DEBUG: Re-registering default for destroot.cmd DEBUG: Re-registering default for destroot.destdir DEBUG: only one arch supported, so not adding the default universal variant DEBUG: No need to upgrade! py27-modulegraph 0.9.1_0 >= py27-modulegraph 0.9.1_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: py27-altgraph 0.9_0 exists in the ports tree DEBUG: py27-altgraph 0.9_0 is the latest installed DEBUG: py27-altgraph 0.9_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py-altgraph DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python-1.0.tcl DEBUG: Re-registering default for build.cmd DEBUG: Re-registering default for destroot.cmd DEBUG: Re-registering default for destroot.destdir DEBUG: only one arch supported, so not adding the default universal variant DEBUG: No need to upgrade! py27-altgraph 0.9_0 >= py27-altgraph 0.9_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: py27-bdist_mpkg 0.4.4_0 exists in the ports tree DEBUG: py27-bdist_mpkg 0.4.4_0 is the latest installed DEBUG: py27-bdist_mpkg 0.4.4_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py-bdist_mpkg DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python-1.0.tcl DEBUG: Re-registering default for build.cmd DEBUG: Re-registering default for destroot.cmd DEBUG: Re-registering default for destroot.destdir DEBUG: only one arch supported, so not adding the default universal variant DEBUG: No need to upgrade! py27-bdist_mpkg 0.4.4_0 >= py27-bdist_mpkg 0.4.4_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libxml2 2.7.8_0 exists in the ports tree DEBUG: libxml2 2.7.8_0 is the latest installed DEBUG: libxml2 2.7.8_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: No need to upgrade! libxml2 2.7.8_0 >= libxml2 2.7.8_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: freetype 2.4.6_0 exists in the ports tree DEBUG: freetype 2.4.6_0 is the latest installed DEBUG: freetype 2.4.6_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: No need to upgrade! freetype 2.4.6_0 >= freetype 2.4.6_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libpng 1.4.8_0 exists in the ports tree DEBUG: libpng 1.4.8_0 is the latest installed DEBUG: libpng 1.4.8_0 +universal is active DEBUG: Merging existing variants '+universal' into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! libpng 1.4.8_0 >= libpng 1.4.8_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: py27-tkinter 2.7.2_0 exists in the ports tree DEBUG: py27-tkinter 2.7.2_0 is the latest installed DEBUG: py27-tkinter 2.7.2_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py27-tkinter DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python27-1.0.tcl DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: No need to upgrade! py27-tkinter 2.7.2_0 >= py27-tkinter 2.7.2_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: tk 8.5.10_0 exists in the ports tree DEBUG: tk 8.5.10_0 is the latest installed DEBUG: tk 8.5.10_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/tk DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: adding the default universal variant DEBUG: No need to upgrade! tk 8.5.10_0 >= tk 8.5.10_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: tcl 8.5.10_0 exists in the ports tree DEBUG: tcl 8.5.10_0 is the latest installed DEBUG: tcl 8.5.10_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/tcl DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: No need to upgrade! tcl 8.5.10_0 >= tcl 8.5.10_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: Xft2 2.2.0_0 exists in the ports tree DEBUG: Xft2 2.2.0_0 is the latest installed DEBUG: Xft2 2.2.0_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: No need to upgrade! Xft2 2.2.0_0 >= Xft2 2.2.0_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xrender 0.9.6_0 exists in the ports tree DEBUG: xrender 0.9.6_0 is the latest installed DEBUG: xrender 0.9.6_0 +universal is active DEBUG: Merging existing variants '+universal' into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! xrender 0.9.6_0 >= xrender 0.9.6_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libX11 1.4.4_0 exists in the ports tree DEBUG: xorg-libX11 1.4.4_0 is the latest installed DEBUG: xorg-libX11 1.4.4_0 +universal is active DEBUG: Merging existing variants '+universal' into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11 DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! xorg-libX11 1.4.4_0 >= xorg-libX11 1.4.4_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXdmcp 1.1.0_0 exists in the ports tree DEBUG: xorg-libXdmcp 1.1.0_0 is the latest installed DEBUG: xorg-libXdmcp 1.1.0_0 +universal is active DEBUG: Merging existing variants '+universal' into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! xorg-libXdmcp 1.1.0_0 >= xorg-libXdmcp 1.1.0_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXau 1.0.6_0 exists in the ports tree DEBUG: xorg-libXau 1.0.6_0 is the latest installed DEBUG: xorg-libXau 1.0.6_0 +universal is active DEBUG: Merging existing variants '+universal' into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! xorg-libXau 1.0.6_0 >= xorg-libXau 1.0.6_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-xproto 7.0.22_0 exists in the ports tree DEBUG: xorg-xproto 7.0.22_0 is the latest installed DEBUG: xorg-xproto 7.0.22_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: only one arch supported, so not adding the default universal variant DEBUG: No need to upgrade! xorg-xproto 7.0.22_0 >= xorg-xproto 7.0.22_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libxcb 1.7_0 exists in the ports tree DEBUG: xorg-libxcb 1.7_0 +python27 is the latest installed DEBUG: xorg-libxcb 1.7_0 +python27+universal is active DEBUG: Merging existing variants '+python27+universal' into variants DEBUG: new fully merged portvariants: universal + python27 + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libxcb DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Executing variant python27 provides python27 DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! xorg-libxcb 1.7_0 >= xorg-libxcb 1.7_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-xcb-proto 1.6_0 exists in the ports tree DEBUG: xorg-xcb-proto 1.6_0 +python27 is the latest installed DEBUG: xorg-xcb-proto 1.6_0 +python27 is active DEBUG: Merging existing variants '+python27' into variants DEBUG: new fully merged portvariants: python27 + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcb-proto DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: only one arch supported, so not adding the default universal variant DEBUG: Executing variant python27 provides python27 DEBUG: No need to upgrade! xorg-xcb-proto 1.6_0 >= xorg-xcb-proto 1.6_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libpthread-stubs 0.3_0 exists in the ports tree DEBUG: xorg-libpthread-stubs 0.3_0 is the latest installed DEBUG: xorg-libpthread-stubs 0.3_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libpthread-stubs DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: only one arch supported, so not adding the default universal variant DEBUG: No need to upgrade! xorg-libpthread-stubs 0.3_0 >= xorg-libpthread-stubs 0.3_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-kbproto 1.0.5_0 exists in the ports tree DEBUG: xorg-kbproto 1.0.5_0 is the latest installed DEBUG: xorg-kbproto 1.0.5_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: only one arch supported, so not adding the default universal variant DEBUG: No need to upgrade! xorg-kbproto 1.0.5_0 >= xorg-kbproto 1.0.5_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-renderproto 0.11.1_0 exists in the ports tree DEBUG: xorg-renderproto 0.11.1_0 is the latest installed DEBUG: xorg-renderproto 0.11.1_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-renderproto DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: only one arch supported, so not adding the default universal variant DEBUG: No need to upgrade! xorg-renderproto 0.11.1_0 >= xorg-renderproto 0.11.1_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: fontconfig 2.8.0_0 exists in the ports tree DEBUG: fontconfig 2.8.0_0 +macosx is the latest installed DEBUG: fontconfig 2.8.0_0 +macosx is active DEBUG: Merging existing variants '+macosx' into variants DEBUG: new fully merged portvariants: macosx + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant macosx is not provided by port fontconfig. DEBUG: Skipping upgrade since fontconfig 2.8.0_0 >= fontconfig 2.8.0_0, even though installed variants "+macosx" do not match "". DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXScrnSaver 1.2.1_0 exists in the ports tree DEBUG: xorg-libXScrnSaver 1.2.1_0 is the latest installed DEBUG: xorg-libXScrnSaver 1.2.1_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXScrnSaver DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: No need to upgrade! xorg-libXScrnSaver 1.2.1_0 >= xorg-libXScrnSaver 1.2.1_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXext 1.3.0_0 exists in the ports tree DEBUG: xorg-libXext 1.3.0_0 is the latest installed DEBUG: xorg-libXext 1.3.0_0 +universal is active DEBUG: Merging existing variants '+universal' into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXext DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! xorg-libXext 1.3.0_0 >= xorg-libXext 1.3.0_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-xextproto 7.2.0_0 exists in the ports tree DEBUG: xorg-xextproto 7.2.0_0 is the latest installed DEBUG: xorg-xextproto 7.2.0_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: only one arch supported, so not adding the default universal variant DEBUG: No need to upgrade! xorg-xextproto 7.2.0_0 >= xorg-xextproto 7.2.0_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-scrnsaverproto 1.2.1_0 exists in the ports tree DEBUG: xorg-scrnsaverproto 1.2.1_0 is the latest installed DEBUG: xorg-scrnsaverproto 1.2.1_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-scrnsaverproto DEBUG: OS darwin/10.8.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: only one arch supported, so not adding the default universal variant DEBUG: No need to upgrade! xorg-scrnsaverproto 1.2.1_0 >= xorg-scrnsaverproto 1.2.1_0 ---> Computing dependencies for py27-matplotlib DEBUG: Searching for dependency: python27 DEBUG: Found Dependency: receipt exists for python27 DEBUG: Searching for dependency: py27-dateutil DEBUG: Found Dependency: receipt exists for py27-dateutil DEBUG: Searching for dependency: py27-tz DEBUG: Found Dependency: receipt exists for py27-tz DEBUG: Searching for dependency: py27-numpy DEBUG: Found Dependency: receipt exists for py27-numpy DEBUG: Searching for dependency: py27-configobj DEBUG: Found Dependency: receipt exists for py27-configobj DEBUG: Searching for dependency: py27-pyobjc-cocoa DEBUG: Found Dependency: receipt exists for py27-pyobjc-cocoa DEBUG: Searching for dependency: freetype DEBUG: Found Dependency: receipt exists for freetype DEBUG: Searching for dependency: libpng DEBUG: Found Dependency: receipt exists for libpng DEBUG: Searching for dependency: py27-tkinter DEBUG: Found Dependency: receipt exists for py27-tkinter DEBUG: Executing org.macports.main (py27-matplotlib) DEBUG: archivefetch phase started at Sun Oct 16 14:27:02 EDT 2011 ---> Fetching archive for py27-matplotlib DEBUG: Executing org.macports.archivefetch (py27-matplotlib) ---> py27-matplotlib-1.1.0_0+tkinter.darwin_10.x86_64.tgz doesn't seem to exist in /opt/local/var/macports/software/py27-matplotlib ---> Attempting to fetch py27-matplotlib-1.1.0_0+tkinter.darwin_10.x86_64.tgz from http://packages.macports.org/py27-matplotlib % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 DEBUG: Fetching archive failed:: The requested URL returned error: 404 DEBUG: fetch phase started at Sun Oct 16 14:27:03 EDT 2011 ---> Fetching py27-matplotlib DEBUG: Executing org.macports.fetch (py27-matplotlib) DEBUG: checksum phase started at Sun Oct 16 14:27:03 EDT 2011 ---> Verifying checksum(s) for py27-matplotlib DEBUG: Executing org.macports.checksum (py27-matplotlib) ---> Checksumming matplotlib-1.1.0.tar.gz DEBUG: Correct (md5) checksum for matplotlib-1.1.0.tar.gz DEBUG: Correct (sha1) checksum for matplotlib-1.1.0.tar.gz DEBUG: Correct (rmd160) checksum for matplotlib-1.1.0.tar.gz DEBUG: extract phase started at Sun Oct 16 14:27:03 EDT 2011 ---> Extracting py27-matplotlib DEBUG: Executing org.macports.extract (py27-matplotlib) ---> Extracting matplotlib-1.1.0.tar.gz DEBUG: setting option extract.args to '/opt/local/var/macports/distfiles/py-matplotlib/matplotlib-1.1.0.tar.gz' DEBUG: Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py-matplotlib/py27-matplotlib/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6' DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py-matplotlib/py27-matplotlib/work" && /usr/bin/gzip -dc '/opt/local/var/macports/distfiles/py-matplotlib/matplotlib-1.1.0.tar.gz' | /usr/bin/gnutar --no-same-owner -xf -' DEBUG: Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py-matplotlib/py27-matplotlib/work" && /usr/bin/gzip -dc '/opt/local/var/macports/distfiles/py-matplotlib/matplotlib-1.1.0.tar.gz' | /usr/bin/gnutar --no-same-owner -xf - DEBUG: patch phase started at Sun Oct 16 14:27:11 EDT 2011 DEBUG: Executing org.macports.patch (py27-matplotlib) ---> Applying patches to py27-matplotlib ---> Applying /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py-matplotlib/files/patch-setupext.py.diff DEBUG: Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py-matplotlib/py27-matplotlib/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6' DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py-matplotlib/py27-matplotlib/work/matplotlib-1.1.0" && /usr/bin/patch -p0' DEBUG: Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py-matplotlib/py27-matplotlib/work/matplotlib-1.1.0" && /usr/bin/patch -p0 < '/opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py-matplotlib/files/patch-setupext.py.diff' patching file setupext.py ---> Applying /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py-matplotlib/files/patch-setup.cfg.diff DEBUG: Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py-matplotlib/py27-matplotlib/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6' DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py-matplotlib/py27-matplotlib/work/matplotlib-1.1.0" && /usr/bin/patch -p0' DEBUG: Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py-matplotlib/py27-matplotlib/work/matplotlib-1.1.0" && /usr/bin/patch -p0 < '/opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py-matplotlib/files/patch-setup.cfg.diff' patching file setup.cfg ---> Applying /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py-matplotlib/files/patch-disable_optional_deps.diff DEBUG: Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py-matplotlib/py27-matplotlib/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6' DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py-matplotlib/py27-matplotlib/work/matplotlib-1.1.0" && /usr/bin/patch -p0' DEBUG: Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py-matplotlib/py27-matplotlib/work/matplotlib-1.1.0" && /usr/bin/patch -p0 < '/opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py-matplotlib/files/patch-disable_optional_deps.diff' patching file setupext.py DEBUG: Executing proc-post-org.macports.patch-patch-0 DEBUG: Executing proc-post-org.macports.patch-patch-1 DEBUG: configure phase started at Sun Oct 16 14:27:12 EDT 2011 ---> Configuring py27-matplotlib DEBUG: Using compiler 'Mac OS X gcc 4.2' DEBUG: Executing org.macports.configure (py27-matplotlib) DEBUG: build phase started at Sun Oct 16 14:27:12 EDT 2011 ---> Building py27-matplotlib DEBUG: Executing proc-pre-org.macports.build-build-0 DEBUG: Executing org.macports.build (py27-matplotlib) DEBUG: Environment: CPATH='/opt/local/include' CFLAGS='-arch x86_64' CXXFLAGS='-arch x86_64' LIBRARY_PATH='/opt/local/lib' MACOSX_DEPLOYMENT_TARGET='10.6' PKG_CONFIG_PATH='/opt/local/Library/Frameworks/Python.framework/Versions/2.7/lib/pkgconfig/' F90FLAGS='-m64' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py-matplotlib/py27-matplotlib/work/.CC_PRINT_OPTIONS' LDFLAGS='-arch x86_64' FCFLAGS='-m64' OBJCFLAGS='-arch x86_64' FFLAGS='-m64' CC_PRINT_OPTIONS='YES' MPLIB_BASE='/opt/local' DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py-matplotlib/py27-matplotlib/work/matplotlib-1.1.0" && /opt/local/Library/Frameworks/Python.framework/Versions/2.7/bin/python2.7 setup.py --no-user-cfg build' DEBUG: Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py-matplotlib/py27-matplotlib/work/matplotlib-1.1.0" && /opt/local/Library/Frameworks/Python.framework/Versions/2.7/bin/python2.7 setup.py --no-user-cfg build <== hangs here; terminated manually with kill after several minutes ==> sh: line 1: 53961 Terminated /opt/local/Library/Frameworks/Python.framework/Versions/2.7/bin/python2.7 setup.py --no-user-cfg build shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py-matplotlib/py27-matplotlib/work/matplotlib-1.1.0" && /opt/local/Library/Frameworks/Python.framework/Versions/2.7/bin/python2.7 setup.py --no-user-cfg build " returned error 143 Error: Target org.macports.build returned: shell command failed (see log for details) DEBUG: Backtrace: shell command failed (see log for details) while executing "command_exec build" (procedure "portbuild::build_main" line 8) invoked from within "$procedure $targetname" Warning: the following items did not execute (for py27-matplotlib): org.macports.activate org.macports.build org.macports.destroot org.macports.install Log for py27-matplotlib is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py-matplotlib/py27-matplotlib/main.log Error: Status 1 encountered during processing. To report a bug, see