$ sudo port selfupdate
Password:
--->  Updating MacPorts base sources using rsync
MacPorts base version 2.0.3 installed,
MacPorts base version 2.0.3 downloaded.
--->  Updating the ports tree
--->  MacPorts base is already the latest version

The ports tree has been updated. To upgrade your installed ports, you should run
  port upgrade outdated
$
$ sudo port upgrade outdated
Password:
--->  Computing dependencies for openssl
--->  Fetching archive for openssl
--->  Attempting to fetch openssl-1.0.0f_0.darwin_11.x86_64.tbz2 from http://packages.macports.org/openssl
--->  Fetching openssl
--->  Attempting to fetch openssl-1.0.0f.tar.gz from http://www.openssl.org/source/
--->  Verifying checksum(s) for openssl
--->  Extracting openssl
--->  Applying patches to openssl
--->  Configuring openssl
--->  Building openssl
--->  Staging openssl into destroot
--->  Installing openssl @1.0.0f_0
--->  Cleaning openssl
--->  Computing dependencies for openssl
--->  Deactivating openssl @1.0.0e_1
--->  Cleaning openssl
--->  Activating openssl @1.0.0f_0
--->  Cleaning openssl
--->  Computing dependencies for gdbm
--->  Fetching archive for gdbm
--->  Attempting to fetch gdbm-1.10_1.darwin_11.x86_64.tbz2 from http://packages.macports.org/gdbm
--->  Fetching gdbm
--->  Verifying checksum(s) for gdbm
--->  Extracting gdbm
--->  Configuring gdbm
--->  Building gdbm
--->  Staging gdbm into destroot
--->  Installing gdbm @1.10_1
--->  Cleaning gdbm
--->  Computing dependencies for gdbm
--->  Deactivating gdbm @1.10_0
--->  Cleaning gdbm
--->  Activating gdbm @1.10_1
--->  Cleaning gdbm
--->  Computing dependencies for perl5.12
--->  Fetching archive for perl5.12
--->  Attempting to fetch perl5.12-5.12.3_3.darwin_11.x86_64.tbz2 from http://packages.macports.org/perl5.12
--->  Fetching perl5.12
--->  Verifying checksum(s) for perl5.12
--->  Extracting perl5.12
--->  Applying patches to perl5.12
--->  Configuring perl5.12
--->  Building perl5.12
--->  Staging perl5.12 into destroot
--->  Installing perl5.12 @5.12.3_3
--->  Cleaning perl5.12
--->  Computing dependencies for perl5.12
--->  Deactivating perl5.12 @5.12.3_2
--->  Cleaning perl5.12
--->  Activating perl5.12 @5.12.3_3
--->  Cleaning perl5.12
--->  Computing dependencies for attica
--->  Fetching archive for attica
--->  Attempting to fetch attica-0.3.0_0.darwin_11.x86_64.tbz2 from http://packages.macports.org/attica
--->  Fetching attica
--->  Attempting to fetch attica-0.3.0.tar.bz2 from ftp://ftp.solnet.ch/mirror/KDE/stable/attica
--->  Verifying checksum(s) for attica
--->  Extracting attica
--->  Configuring attica
--->  Building attica
--->  Staging attica into destroot
--->  Installing attica @0.3.0_0
--->  Cleaning attica
--->  Computing dependencies for attica
--->  Deactivating attica @0.2.9_0
--->  Cleaning attica
--->  Activating attica @0.3.0_0
##########################################################
# Don't forget that dbus needs to be started as the local 
# user (not with sudo) before any KDE programs will launch
# To start it run the following command:                  
# launchctl load -w /Library/LaunchAgents/org.freedesktop.dbus-session.plist
##########################################################
 
######################################################
#  Programs will not start until you run the command 
#  'sudo chown -R $USER ~/Library/Preferences/KDE'  
#  replacing $USER with your username.              
######################################################
--->  Cleaning attica
--->  Computing dependencies for audiofile
--->  Fetching archive for audiofile
--->  Attempting to fetch audiofile-0.3.2_0.darwin_11.x86_64.tbz2 from http://packages.macports.org/audiofile
--->  Fetching audiofile
--->  Attempting to fetch audiofile-0.3.2.tar.gz from http://lil.fr.distfiles.macports.org/audiofile
--->  Verifying checksum(s) for audiofile
--->  Extracting audiofile
--->  Configuring audiofile
--->  Building audiofile
--->  Staging audiofile into destroot
--->  Installing audiofile @0.3.2_0
--->  Cleaning audiofile
--->  Deactivating audiofile @0.2.7_1
--->  Cleaning audiofile
--->  Activating audiofile @0.3.2_0
--->  Cleaning audiofile
--->  Computing dependencies for automake
--->  Fetching archive for automake
--->  Attempting to fetch automake-1.11.2_0.darwin_11.noarch.tbz2 from http://packages.macports.org/automake
--->  Fetching automake
--->  Attempting to fetch automake-1.11.2.tar.bz2 from http://lil.fr.distfiles.macports.org/automake
--->  Verifying checksum(s) for automake
--->  Extracting automake
--->  Configuring automake
--->  Building automake
--->  Staging automake into destroot
--->  Installing automake @1.11.2_0
--->  Cleaning automake
--->  Computing dependencies for automake
--->  Deactivating automake @1.11.1_0
--->  Cleaning automake
--->  Activating automake @1.11.2_0
--->  Cleaning automake
--->  Computing dependencies for boost
--->  Fetching archive for boost
--->  Attempting to fetch boost-1.48.0_3.darwin_11.x86_64.tbz2 from http://packages.macports.org/boost
--->  Fetching boost
--->  Verifying checksum(s) for boost
--->  Extracting boost
--->  Applying patches to boost
--->  Configuring boost
--->  Building boost
--->  Staging boost into destroot
--->  Installing boost @1.48.0_3
--->  Cleaning boost
--->  Computing dependencies for boost
--->  Deactivating boost @1.48.0_2
--->  Cleaning boost
--->  Activating boost @1.48.0_3
--->  Cleaning boost
--->  Computing dependencies for dcraw
--->  Fetching archive for dcraw
--->  Attempting to fetch dcraw-9.12-20111226123200_0.darwin_11.x86_64.tbz2 from http://packages.macports.org/dcraw
--->  Fetching dcraw
--->  Attempting to fetch dcraw-9.12.tar.gz from http://lil.fr.distfiles.macports.org/dcraw/9.12-20111226123200
--->  Verifying checksum(s) for dcraw
--->  Extracting dcraw
--->  Configuring dcraw
--->  Building dcraw
--->  Staging dcraw into destroot
--->  Installing dcraw @9.12-20111226123200_0
--->  Cleaning dcraw
--->  Computing dependencies for dcraw
--->  Deactivating dcraw @9.11-20111006211100_0
--->  Cleaning dcraw
--->  Activating dcraw @9.12-20111226123200_0
--->  Cleaning dcraw
--->  Computing dependencies for gd2
--->  Fetching archive for gd2
--->  Attempting to fetch gd2-2.0.35_11.darwin_11.x86_64.tbz2 from http://packages.macports.org/gd2
--->  Fetching gd2
--->  Verifying checksum(s) for gd2
--->  Extracting gd2
--->  Applying patches to gd2
--->  Configuring gd2
--->  Building gd2
--->  Staging gd2 into destroot
--->  Installing gd2 @2.0.35_11
--->  Cleaning gd2
--->  Computing dependencies for gd2
--->  Deactivating gd2 @2.0.35_10
--->  Cleaning gd2
--->  Activating gd2 @2.0.35_11
--->  Cleaning gd2
--->  Computing dependencies for iso-codes
--->  Fetching archive for iso-codes
--->  Attempting to fetch iso-codes-3.31_0.darwin_11.noarch.tbz2 from http://packages.macports.org/iso-codes
--->  Fetching iso-codes
--->  Attempting to fetch iso-codes_3.31.orig.tar.bz2 from http://lil.fr.distfiles.macports.org/iso-codes
--->  Verifying checksum(s) for iso-codes
--->  Extracting iso-codes
--->  Configuring iso-codes
--->  Building iso-codes
--->  Staging iso-codes into destroot
--->  Installing iso-codes @3.31_0
--->  Cleaning iso-codes
--->  Deactivating iso-codes @3.29_0
--->  Cleaning iso-codes
--->  Activating iso-codes @3.31_0
--->  Cleaning iso-codes
--->  Computing dependencies for raptor2
--->  Fetching archive for raptor2
--->  Attempting to fetch raptor2-2.0.6_0.darwin_11.x86_64.tbz2 from http://packages.macports.org/raptor2
--->  Fetching raptor2
--->  Attempting to fetch raptor2-2.0.6.tar.gz from http://lil.fr.distfiles.macports.org/raptor2
--->  Verifying checksum(s) for raptor2
--->  Extracting raptor2
--->  Configuring raptor2
--->  Building raptor2
--->  Staging raptor2 into destroot
--->  Installing raptor2 @2.0.6_0
--->  Cleaning raptor2
--->  Computing dependencies for raptor2
--->  Deactivating raptor2 @2.0.4_1
--->  Cleaning raptor2
--->  Activating raptor2 @2.0.6_0
--->  Cleaning raptor2
--->  Computing dependencies for rasqal
--->  Fetching archive for rasqal
--->  Attempting to fetch rasqal-0.9.28_0.darwin_11.x86_64.tbz2 from http://packages.macports.org/rasqal
--->  Fetching rasqal
--->  Attempting to fetch rasqal-0.9.28.tar.gz from http://lil.fr.distfiles.macports.org/rasqal
--->  Verifying checksum(s) for rasqal
--->  Extracting rasqal
--->  Configuring rasqal
--->  Building rasqal
--->  Staging rasqal into destroot
--->  Installing rasqal @0.9.28_0
--->  Cleaning rasqal
--->  Computing dependencies for rasqal
--->  Deactivating rasqal @0.9.26_3
--->  Cleaning rasqal
--->  Activating rasqal @0.9.28_0
--->  Cleaning rasqal
--->  Computing dependencies for redland
--->  Fetching archive for redland
--->  Attempting to fetch redland-1.0.15_0+db46.darwin_11.x86_64.tbz2 from http://packages.macports.org/redland
--->  Fetching redland
--->  Attempting to fetch redland-1.0.15.tar.gz from http://lil.fr.distfiles.macports.org/redland
--->  Verifying checksum(s) for redland
--->  Extracting redland
--->  Applying patches to redland
--->  Configuring redland
--->  Building redland
--->  Staging redland into destroot
--->  Installing redland @1.0.15_0+db46
--->  Cleaning redland
--->  Computing dependencies for redland
--->  Deactivating redland @1.0.14_1+db46
--->  Cleaning redland
--->  Activating redland @1.0.15_0+db46
--->  Cleaning redland
--->  Computing dependencies for soprano
--->  Fetching archive for soprano
--->  Attempting to fetch soprano-2.7.4_0.darwin_11.x86_64.tbz2 from http://packages.macports.org/soprano
--->  Fetching soprano
--->  Attempting to fetch soprano-2.7.4.tar.bz2 from http://lil.fr.distfiles.macports.org/soprano
--->  Verifying checksum(s) for soprano
--->  Extracting soprano
--->  Applying patches to soprano
--->  Configuring soprano
--->  Building soprano
--->  Staging soprano into destroot
--->  Installing soprano @2.7.4_0
--->  Cleaning soprano
--->  Computing dependencies for soprano
--->  Deactivating soprano @2.7.0_0
--->  Cleaning soprano
--->  Activating soprano @2.7.4_0
##########################################################
# Don't forget that dbus needs to be started as the local 
# user (not with sudo) before any KDE programs will launch
# To start it run the following command:                  
# launchctl load -w /Library/LaunchAgents/org.freedesktop.dbus-session.plist
##########################################################
 
######################################################
#  Programs will not start until you run the command 
#  'sudo chown -R $USER ~/Library/Preferences/KDE'  
#  replacing $USER with your username.              
######################################################
--->  Cleaning soprano
--->  Fetching archive for xorg-inputproto
--->  Attempting to fetch xorg-inputproto-2.1_0.darwin_11.noarch.tbz2 from http://packages.macports.org/xorg-inputproto
--->  Fetching xorg-inputproto
--->  Attempting to fetch inputproto-2.1.tar.bz2 from http://mirror.switch.ch/ftp/mirror/X11/pub/individual/proto/
--->  Verifying checksum(s) for xorg-inputproto
--->  Extracting xorg-inputproto
--->  Configuring xorg-inputproto
--->  Building xorg-inputproto
--->  Staging xorg-inputproto into destroot
--->  Installing xorg-inputproto @2.1_0
--->  Cleaning xorg-inputproto
--->  Deactivating xorg-inputproto @2.0.99.1_0
--->  Cleaning xorg-inputproto
--->  Activating xorg-inputproto @2.1_0
--->  Cleaning xorg-inputproto
--->  Computing dependencies for xorg-libXi
--->  Fetching archive for xorg-libXi
--->  Attempting to fetch xorg-libXi-1.5.0_0.darwin_11.x86_64.tbz2 from http://packages.macports.org/xorg-libXi
--->  Fetching xorg-libXi
--->  Attempting to fetch libXi-1.5.0.tar.bz2 from http://mirror.switch.ch/ftp/mirror/X11/pub/individual/lib/
--->  Verifying checksum(s) for xorg-libXi
--->  Extracting xorg-libXi
--->  Configuring xorg-libXi
--->  Building xorg-libXi
--->  Staging xorg-libXi into destroot
--->  Installing xorg-libXi @1.5.0_0
--->  Cleaning xorg-libXi
--->  Computing dependencies for xorg-libXi
--->  Deactivating xorg-libXi @1.4.3_0
--->  Cleaning xorg-libXi
--->  Activating xorg-libXi @1.5.0_0
--->  Cleaning xorg-libXi
--->  Computing dependencies for kdelibs4
--->  Fetching archive for kdelibs4
--->  Attempting to fetch kdelibs4-4.7.4_1.darwin_11.x86_64.tbz2 from http://packages.macports.org/kdelibs4
--->  Fetching kdelibs4
--->  Attempting to fetch kdelibs-4.7.4.tar.bz2 from http://lil.fr.distfiles.macports.org/kdelibs4
--->  Verifying checksum(s) for kdelibs4
--->  Extracting kdelibs4
--->  Applying patches to kdelibs4
--->  Configuring kdelibs4
--->  Building kdelibs4
--->  Staging kdelibs4 into destroot
--->  Installing kdelibs4 @4.7.4_1
--->  Cleaning kdelibs4
--->  Computing dependencies for kdelibs4
--->  Deactivating kdelibs4 @4.7.3_0
--->  Cleaning kdelibs4
--->  Activating kdelibs4 @4.7.4_1
##########################################################
# Don't forget that dbus needs to be started as the local 
# user (not with sudo) before any KDE programs will launch
# To start it run the following command:                  
# launchctl load -w /Library/LaunchAgents/org.freedesktop.dbus-session.plist
##########################################################
 
######################################################
#  Programs will not start until you run the command 
#  'sudo chown -R $USER ~/Library/Preferences/KDE'  
#  replacing $USER with your username.              
######################################################
--->  Cleaning kdelibs4
--->  Computing dependencies for kdepimlibs4
--->  Fetching archive for kdepimlibs4
--->  Attempting to fetch kdepimlibs4-4.7.4_0.darwin_11.x86_64.tbz2 from http://packages.macports.org/kdepimlibs4
--->  Fetching kdepimlibs4
--->  Attempting to fetch kdepimlibs-4.7.4.tar.bz2 from ftp://ftp.solnet.ch/mirror/KDE/stable/4.7.4/src/
--->  Verifying checksum(s) for kdepimlibs4
--->  Extracting kdepimlibs4
--->  Configuring kdepimlibs4
--->  Building kdepimlibs4
--->  Staging kdepimlibs4 into destroot
--->  Installing kdepimlibs4 @4.7.4_0
--->  Cleaning kdepimlibs4
--->  Computing dependencies for kdepimlibs4
--->  Deactivating kdepimlibs4 @4.7.3_0
--->  Cleaning kdepimlibs4
--->  Activating kdepimlibs4 @4.7.4_0
##########################################################
# Don't forget that dbus needs to be started as the local 
# user (not with sudo) before any KDE programs will launch
# To start it run the following command:                  
# launchctl load -w /Library/LaunchAgents/org.freedesktop.dbus-session.plist
##########################################################
 
######################################################
#  Programs will not start until you run the command 
#  'sudo chown -R $USER ~/Library/Preferences/KDE'  
#  replacing $USER with your username.              
######################################################
--->  Cleaning kdepimlibs4
--->  Computing dependencies for libkdcraw
--->  Fetching archive for libkdcraw
--->  Attempting to fetch libkdcraw-4.7.4_0.darwin_11.x86_64.tbz2 from http://packages.macports.org/libkdcraw
--->  Fetching libkdcraw
--->  Attempting to fetch libkdcraw-4.7.4.tar.bz2 from ftp://ftp.solnet.ch/mirror/KDE/stable/4.7.4/src/
--->  Verifying checksum(s) for libkdcraw
--->  Extracting libkdcraw
--->  Configuring libkdcraw
--->  Building libkdcraw
--->  Staging libkdcraw into destroot
--->  Installing libkdcraw @4.7.4_0
--->  Cleaning libkdcraw
--->  Computing dependencies for libkdcraw
--->  Deactivating libkdcraw @4.7.3_0
--->  Cleaning libkdcraw
--->  Activating libkdcraw @4.7.4_0
##########################################################
# Don't forget that dbus needs to be started as the local 
# user (not with sudo) before any KDE programs will launch
# To start it run the following command:                  
# launchctl load -w /Library/LaunchAgents/org.freedesktop.dbus-session.plist
##########################################################
 
######################################################
#  Programs will not start until you run the command 
#  'sudo chown -R $USER ~/Library/Preferences/KDE'  
#  replacing $USER with your username.              
######################################################
--->  Cleaning libkdcraw
--->  Computing dependencies for libkdeedu
--->  Fetching archive for libkdeedu
--->  Attempting to fetch libkdeedu-4.7.4_1.darwin_11.x86_64.tbz2 from http://packages.macports.org/libkdeedu
--->  Fetching libkdeedu
--->  Attempting to fetch libkdeedu-4.7.4.tar.bz2 from ftp://ftp.solnet.ch/mirror/KDE/stable/4.7.4/src/
--->  Verifying checksum(s) for libkdeedu
--->  Extracting libkdeedu
--->  Configuring libkdeedu
--->  Building libkdeedu
--->  Staging libkdeedu into destroot
--->  Installing libkdeedu @4.7.4_1
--->  Cleaning libkdeedu
--->  Computing dependencies for libkdeedu
--->  Deactivating libkdeedu @4.7.3_0
--->  Cleaning libkdeedu
--->  Activating libkdeedu @4.7.4_1
##########################################################
# Don't forget that dbus needs to be started as the local 
# user (not with sudo) before any KDE programs will launch
# To start it run the following command:                  
# launchctl load -w /Library/LaunchAgents/org.freedesktop.dbus-session.plist
##########################################################
 
######################################################
#  Programs will not start until you run the command 
#  'sudo chown -R $USER ~/Library/Preferences/KDE'  
#  replacing $USER with your username.              
######################################################
--->  Cleaning libkdeedu
--->  Computing dependencies for libkexiv2
--->  Fetching archive for libkexiv2
--->  Attempting to fetch libkexiv2-4.7.4_0.darwin_11.x86_64.tbz2 from http://packages.macports.org/libkexiv2
--->  Fetching libkexiv2
--->  Attempting to fetch libkexiv2-4.7.4.tar.bz2 from ftp://ftp.solnet.ch/mirror/KDE/stable/4.7.4/src/
--->  Verifying checksum(s) for libkexiv2
--->  Extracting libkexiv2
--->  Configuring libkexiv2
--->  Building libkexiv2
--->  Staging libkexiv2 into destroot
--->  Installing libkexiv2 @4.7.4_0
--->  Cleaning libkexiv2
--->  Computing dependencies for libkexiv2
--->  Deactivating libkexiv2 @4.7.3_0
--->  Cleaning libkexiv2
--->  Activating libkexiv2 @4.7.4_0
##########################################################
# Don't forget that dbus needs to be started as the local 
# user (not with sudo) before any KDE programs will launch
# To start it run the following command:                  
# launchctl load -w /Library/LaunchAgents/org.freedesktop.dbus-session.plist
##########################################################
 
######################################################
#  Programs will not start until you run the command 
#  'sudo chown -R $USER ~/Library/Preferences/KDE'  
#  replacing $USER with your username.              
######################################################
--->  Cleaning libkexiv2
--->  Computing dependencies for libkipi
--->  Fetching archive for libkipi
--->  Attempting to fetch libkipi-4.7.4_0.darwin_11.x86_64.tbz2 from http://packages.macports.org/libkipi
--->  Fetching libkipi
--->  Attempting to fetch libkipi-4.7.4.tar.bz2 from ftp://ftp.solnet.ch/mirror/KDE/stable/4.7.4/src/
--->  Verifying checksum(s) for libkipi
--->  Extracting libkipi
--->  Configuring libkipi
--->  Building libkipi
--->  Staging libkipi into destroot
--->  Installing libkipi @4.7.4_0
--->  Cleaning libkipi
--->  Computing dependencies for libkipi
--->  Deactivating libkipi @4.7.3_0
--->  Cleaning libkipi
--->  Activating libkipi @4.7.4_0
##########################################################
# Don't forget that dbus needs to be started as the local 
# user (not with sudo) before any KDE programs will launch
# To start it run the following command:                  
# launchctl load -w /Library/LaunchAgents/org.freedesktop.dbus-session.plist
##########################################################
 
######################################################
#  Programs will not start until you run the command 
#  'sudo chown -R $USER ~/Library/Preferences/KDE'  
#  replacing $USER with your username.              
######################################################
--->  Cleaning libkipi
--->  Computing dependencies for libksane
--->  Fetching archive for libksane
--->  Attempting to fetch libksane-4.7.4_0.darwin_11.x86_64.tbz2 from http://packages.macports.org/libksane
--->  Fetching libksane
--->  Attempting to fetch libksane-4.7.4.tar.bz2 from ftp://ftp.solnet.ch/mirror/KDE/stable/4.7.4/src/
--->  Verifying checksum(s) for libksane
--->  Extracting libksane
--->  Configuring libksane
--->  Building libksane
--->  Staging libksane into destroot
--->  Installing libksane @4.7.4_0
--->  Cleaning libksane
--->  Computing dependencies for libksane
--->  Deactivating libksane @4.7.3_0
--->  Cleaning libksane
--->  Activating libksane @4.7.4_0
##########################################################
# Don't forget that dbus needs to be started as the local 
# user (not with sudo) before any KDE programs will launch
# To start it run the following command:                  
# launchctl load -w /Library/LaunchAgents/org.freedesktop.dbus-session.plist
##########################################################
 
######################################################
#  Programs will not start until you run the command 
#  'sudo chown -R $USER ~/Library/Preferences/KDE'  
#  replacing $USER with your username.              
######################################################
--->  Cleaning libksane
--->  Fetching archive for libtasn1
--->  Attempting to fetch libtasn1-2.11_0.darwin_11.x86_64.tbz2 from http://packages.macports.org/libtasn1
--->  Fetching libtasn1
--->  Attempting to fetch libtasn1-2.11.tar.gz from http://lil.fr.distfiles.macports.org/libtasn1
--->  Verifying checksum(s) for libtasn1
--->  Extracting libtasn1
--->  Configuring libtasn1
--->  Building libtasn1
--->  Staging libtasn1 into destroot
--->  Installing libtasn1 @2.11_0
--->  Cleaning libtasn1
--->  Deactivating libtasn1 @2.9_0
--->  Cleaning libtasn1
--->  Activating libtasn1 @2.11_0
--->  Cleaning libtasn1
--->  Computing dependencies for marble
--->  Fetching archive for marble
--->  Attempting to fetch marble-4.7.4_0.darwin_11.x86_64.tbz2 from http://packages.macports.org/marble
--->  Fetching marble
--->  Attempting to fetch marble-4.7.4.tar.bz2 from ftp://ftp.solnet.ch/mirror/KDE/stable/4.7.4/src/
--->  Verifying checksum(s) for marble
--->  Extracting marble
--->  Applying patches to marble
--->  Configuring marble
--->  Building marble
--->  Staging marble into destroot
--->  Installing marble @4.7.4_0
--->  Cleaning marble
--->  Computing dependencies for marble
--->  Deactivating marble @4.7.3_0
--->  Cleaning marble
--->  Activating marble @4.7.4_0
##########################################################
# Don't forget that dbus needs to be started as the local 
# user (not with sudo) before any KDE programs will launch
# To start it run the following command:                  
# launchctl load -w /Library/LaunchAgents/org.freedesktop.dbus-session.plist
##########################################################
 
######################################################
#  Programs will not start until you run the command 
#  'sudo chown -R $USER ~/Library/Preferences/KDE'  
#  replacing $USER with your username.              
######################################################
--->  Cleaning marble
--->  Computing dependencies for oxygen-icons
--->  Fetching archive for oxygen-icons
--->  Attempting to fetch oxygen-icons-4.7.4_0.darwin_11.noarch.tbz2 from http://packages.macports.org/oxygen-icons
--->  Fetching oxygen-icons
--->  Attempting to fetch oxygen-icons-4.7.4.tar.bz2 from ftp://ftp.solnet.ch/mirror/KDE/stable/4.7.4/src/
--->  Verifying checksum(s) for oxygen-icons
--->  Extracting oxygen-icons
--->  Configuring oxygen-icons
--->  Building oxygen-icons
--->  Staging oxygen-icons into destroot
--->  Installing oxygen-icons @4.7.4_0
--->  Cleaning oxygen-icons
--->  Computing dependencies for oxygen-icons
--->  Deactivating oxygen-icons @4.7.3_0
--->  Cleaning oxygen-icons
--->  Activating oxygen-icons @4.7.4_0
##########################################################
# Don't forget that dbus needs to be started as the local 
# user (not with sudo) before any KDE programs will launch
# To start it run the following command:                  
# launchctl load -w /Library/LaunchAgents/org.freedesktop.dbus-session.plist
##########################################################
 
######################################################
#  Programs will not start until you run the command 
#  'sudo chown -R $USER ~/Library/Preferences/KDE'  
#  replacing $USER with your username.              
######################################################
--->  Cleaning oxygen-icons
--->  Computing dependencies for py27-nose
--->  Fetching archive for py27-nose
--->  Attempting to fetch py27-nose-1.1.2_1.darwin_11.noarch.tbz2 from http://packages.macports.org/py27-nose
--->  Fetching py27-nose
--->  Verifying checksum(s) for py27-nose
--->  Extracting py27-nose
--->  Configuring py27-nose
--->  Building py27-nose
--->  Staging py27-nose into destroot
--->  Installing py27-nose @1.1.2_1
--->  Cleaning py27-nose
--->  Computing dependencies for py27-nose
--->  Deactivating py27-nose @1.1.2_0
--->  Cleaning py27-nose
--->  Activating py27-nose @1.1.2_1
--->  Cleaning py27-nose
--->  Fetching archive for xorg-util-macros
--->  Attempting to fetch xorg-util-macros-1.16.0_0.darwin_11.noarch.tbz2 from http://packages.macports.org/xorg-util-macros
--->  Fetching xorg-util-macros
--->  Attempting to fetch util-macros-1.16.0.tar.bz2 from http://lil.fr.distfiles.macports.org/xorg-util-macros
--->  Verifying checksum(s) for xorg-util-macros
--->  Extracting xorg-util-macros
--->  Configuring xorg-util-macros
--->  Building xorg-util-macros
--->  Staging xorg-util-macros into destroot
--->  Installing xorg-util-macros @1.16.0_0
--->  Cleaning xorg-util-macros
--->  Deactivating xorg-util-macros @1.15.0_0
--->  Cleaning xorg-util-macros
--->  Activating xorg-util-macros @1.16.0_0
--->  Cleaning xorg-util-macros
$