--- /opt/local/var/macports/sources/svn.macports.org/trunk/dports/multimedia/VLC/Portfile 2016-05-08 19:42:33.000000000 +0200
+++ /opt/local/site-ports/multimedia/VLC/Portfile 2016-05-25 19:55:18.000000000 +0200
@@ -1,36 +1,34 @@
# -*- coding: utf-8; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- vim:fenc=utf-8:et:sw=4:ts=4:sts=4
-# $Id: Portfile 148228 2016-04-30 17:55:10Z mps@macports.org $
+# $Id: Portfile 146115 2016-02-28 16:09:05Z devans@macports.org $
-PortSystem 1.0
-PortGroup compiler_blacklist_versions 1.0
-PortGroup active_variants 1.1
-
-# TODO
-# if {[file exists ${prefix}/etc/macports/locales.tcl]} {
-# # experimental feature to cut down the NLS/locale files, which take up over 50% of
-# # the install footprint for VLC. This feature loads the locale_select PortGroup
-# # if its configuration file exist; a variant is then added which prunes all translations from
-# # ${destroot}${prefix}/share/locale except those whitelisted in etc/macports/locales.tcl .
-# PortGroup locale_select 1.0
-# }
-
-name VLC
-version 2.2.2
-revision 4
-
-categories multimedia devel
-maintainers nomaintainer
-
-description VLC is a cross-platform media player and streaming server
-long_description VLC media player is a highly portable multimedia player for \
- various audio and video formats (MPEG-1, MPEG-2, MPEG-4, DivX, \
- mp3, ogg, ...) as well as DVDs, VCDs, and various streaming protocols. \
- It can also be used as a server to stream in unicast or multicast \
- in IPv4 or IPv6 on a high-bandwidth network.
+PortSystem 1.0
+PortGroup compiler_blacklist_versions 1.0
+PortGroup active_variants 1.1
+PortGroup conflicts_build 1.0
-homepage http://www.videolan.org
+if {[file exists ${prefix}/etc/macports/locales.tcl]} {
+ # experimental feature to cut down the NLS/locale files, which take up over 50% of
+ # the install footprint for VLC. This feature loads the locale_select PortGroup
+ # if its configuration file exist; a variant is then added which prunes all translations from
+ # ${destroot}${prefix}/share/locale except those whitelisted in etc/macports/locales.tcl .
+ PortGroup locale_select 1.0
+}
+
+name VLC
+
+categories multimedia devel
+maintainers gmail.com:rjvbertin openmaintainer
+
+description VLC is a cross-platform media player and streaming server
+long_description VLC media player is a highly portable multimedia player for \
+ various audio and video formats (MPEG-1, MPEG-2, MPEG-4, DivX, \
+ mp3, ogg, ...) as well as DVDs, VCDs, and various streaming protocols. \
+ It can also be used as a server to stream in unicast or multicast \
+ in IPv4 or IPv6 on a high-bandwidth network.
+
+homepage http://www.videolan.org
-subport lib${name} {
+subport lib${name} {
maintainers gmail.com:rjvbertin openmaintainer
description the core engine and interface to VLC's multimedia framework
long_description libVLC is the core engine and the interface to the multimedia \
@@ -40,434 +38,678 @@
homepage http://www.videolan.org/vlc/libvlc.html
}
+subport ffmpeg-VLC {}
+set FFMPEG_VLC_PREFIX ${prefix}/lib/vlc/ffmpeg
+
if {${subport} eq ${name}} {
conflicts lib${name} libVLC-devel VLC-devel
}
-license GPL-2
+# VLC-2.1 and later are x86_64-only: https://trac.videolan.org/vlc/ticket/8161
+universal_variant no
+supported_archs x86_64
-platforms darwin
+##
+################### ports VLC and libVLC ###################
+##
+if {(${subport} eq ${name}) || (${subport} eq "lib${name}")} {
+ version 2.2.3
+ license GPL-2
+
+ platforms darwin
+
+ master_sites http://download.videolan.org/pub/videolan/vlc/${version}/
+ distname vlc-${version}
+ use_xz yes
+
+ checksums rmd160 8c6d4194da37210fe409c965f430898fbe7f2416 \
+ sha256 b9d7587d35f13c3c981964c8cc8b03f1c7c8edf528be476b3ca1d2efedd5bf5b
+
+ # Enable HFS compression.
+ if {[file exists ${prefix}/bin/bsdtar]} {
+# depends_extract-append port:libarchive
+ extract.post_args \
+ "| ${prefix}/bin/bsdtar -x --hfsCompression"
+ }
-master_sites http://download.videolan.org/pub/videolan/vlc/${version}/
-distname vlc-${version}
-use_xz yes
-
-checksums rmd160 ff302536334622427e06250457c74f061d4329f8 \
- sha256 9ad23128be16f9b40ed772961272cb0748ed8e4aa1bc79c129e589feebea5fb5
-
-# Enable HFS compression.
-depends_extract-append port:libarchive
-extract.post_args "| bsdtar -x --hfsCompression"
-
-depends_build port:pkgconfig
-
-depends_lib port:a52dec \
- port:avahi \
- port:bzip2 \
- port:faad2 \
- path:lib/libavcodec.dylib:ffmpeg \
- port:flac \
- port:fluidsynth \
- port:fontconfig \
- port:freetype \
- port:fribidi \
- port:gettext \
- path:lib/pkgconfig/glib-2.0.pc:glib2 \
- port:gmp \
- port:gnutls \
- port:jpeg \
- port:lame \
- port:libass \
- port:libbluray \
- port:libcddb \
- port:libcdio \
- port:libdc1394 \
- port:libdca \
- port:libdvbpsi \
- port:libdvdnav \
- port:libdvdread \
- port:libebml \
- port:libgcrypt \
- port:libgpg-error \
- port:libiconv \
- port:libid3tag \
- port:libidn \
- port:libmad \
- port:libmatroska \
- port:libmodplug \
- port:libmpcdec \
- port:libmpeg2 \
- port:libmtp \
- port:libogg \
- port:libopus \
- port:libpng \
- port:libproxy \
- port:libsamplerate \
- port:libsdl \
- port:libsdl_image \
- port:libsndfile \
- port:libssh2 \
- port:libtheora \
- port:libupnp \
- port:libusb \
- port:libvorbis \
- port:libvpx \
- port:libxml2 \
- port:live555 \
- port:ncurses \
- port:nettle \
- port:opencv \
- port:openjpeg15 \
- path:lib/libssl.dylib:openssl \
- port:orc \
- port:p11-kit \
- port:readline \
- port:schroedinger \
- port:speex \
- port:taglib \
- port:tiff \
- port:twolame \
- port:vcdimager \
- port:x264 \
- port:x265
-
-# the +qt5 and/or +qt4 variants of port:opencv currently lead to build errors
-pre-configure {
- if {![active_variants opencv "" {qt4 qt5}]} {
- ui_error "${subport} cannot currently be built against port:opencv with the qt4 or qt5 variant.\
- Install port:opencv without either qt variant and try again. This is only a build conflict; \
- after building you can reactivate your preferred opencv variant"
- return -code error "Install or activate port:opencv without a qt variant before building ${subport}"
+ depends_build port:pkgconfig
+
+ depends_lib path:${FFMPEG_VLC_PREFIX}/lib/libavcodec.dylib:ffmpeg-VLC \
+ port:a52dec \
+ port:avahi \
+ port:bzip2 \
+ port:faad2 \
+ port:flac \
+ port:fluidsynth \
+ port:fontconfig \
+ port:freetype \
+ port:fribidi \
+ port:gettext \
+ path:lib/pkgconfig/glib-2.0.pc:glib2 \
+ port:gmp \
+ port:gnutls \
+ port:jpeg \
+ port:lame \
+ port:libass \
+ port:libbluray \
+ port:libcddb \
+ port:libcdio \
+ port:libdc1394 \
+ port:libdca \
+ port:libdvbpsi \
+ port:libdvdnav \
+ port:libdvdread \
+ port:libebml \
+ port:libgcrypt \
+ port:libgpg-error \
+ port:libiconv \
+ port:libid3tag \
+ port:libidn \
+ port:libmad \
+ port:libmatroska \
+ port:libmodplug \
+ port:libmpcdec \
+ port:libmpeg2 \
+ port:libmtp \
+ port:libogg \
+ port:libopus \
+ port:libpng \
+ port:libproxy \
+ port:libsamplerate \
+ port:libsdl \
+ port:libsdl_image \
+ port:libsndfile \
+ port:libssh2 \
+ port:libtheora \
+ port:libupnp \
+ port:libusb \
+ port:libvorbis \
+ port:libvpx \
+ port:libxml2 \
+ port:live555 \
+ port:ncurses \
+ port:nettle \
+ port:openjpeg15 \
+ path:lib/libssl.dylib:openssl \
+ port:orc \
+ port:p11-kit \
+ port:readline \
+ port:schroedinger \
+ port:speex \
+ port:taglib \
+ port:tiff \
+ port:twolame \
+ port:vcdimager \
+ port:x264 \
+ port:x265
+
+ pre-fetch {
+ if {${os.platform} eq "darwin" && ${os.major} < 10} {
+ ui_error "${name} ${version} requires Mac OS X 10.6 or greater."
+ return -code error "incompatible Mac OS X version"
+ }
}
-}
-# VLC 2.2.2 should have full Lua 5.3 compatibility, for now, depend on port:lua52
-# That requires the patch-for-lua52.diff which is appended to patchfiles below.
-# update 2.2.2 : lua 5.3 gives compiler syntax errors so we stick with 5.2 for now.
-depends_lib-append port:lua52
-# depends_lib-append port:lua
+# port:opencv depends on port:ffmpeg and thus enters in conflict with us depending on our own ffmpeg build
+# 1 viable solution as long as this is the case: drop the opencv filter.
+# depends_lib-append port:opencv
+# # the +qt5 and/or +qt4 variants of port:opencv currently lead to build errors. A patch has
+# # been submitted (but not included) that resolves the issue for qt4, not yet for qt5.
+# # https://trac.macports.org/ticket/50709
+# # For regular users a single check in the pre-fetch would suffice, but this maintainer
+# # needs the check at other opportune moments too.
+# proc check_opencv {} {
+# global subport
+# if {![active_variants opencv "" {qt4 qt5}]} {
+# ui_error "${subport} cannot currently be built against port:opencv with the qt5 variant.\
+# Install port:opencv without that variant and try again. This is only a build conflict; \
+# after building you can reactivate your preferred opencv variant"
+# return -code error "Install or activate port:opencv without the qt5 variant before building ${subport}"
+# }
+# }
+# pre-fetch {
+# check_opencv
+# }
+# pre-configure {
+# check_opencv
+# }
+# pre-build {
+# check_opencv
+# }
+# patchfiles-append patch-opencv_includes.diff
+# # The opencv example apparently builds on 10.11 but I'm having issues with it on 10.9
+# # it doesn't appear to be indispensable, so simply skip it.
+# patchfiles-append patch-no-opencv_example.diff
+
+ # VLC 2.2.2 should have full Lua 5.3 compatibility, for now, depend on port:lua52
+ # That requires the patch-for-lua52.diff which is appended to patchfiles below.
+ # update 2.2.2 : lua 5.3 gives compiler syntax errors so we stick with 5.2 for now.
+ depends_lib-append port:lua52
+ # depends_lib-append port:lua
+
+ # VLC doesn't currently build for me using port:clang-3.8
+ compiler.blacklist-append \
+ gcc-4.2 llvm-gcc-4.2 macports-clang-3.8 {clang < 300}
+
+ patchfiles buildfix-package.mak.patch \
+ configure.ac-no-arch.patch \
+ PR-34741-no__clang_version__.patch \
+ static_assert.patch \
+ no-sparkle.patch \
+ patch-vlc-no-O4.diff
-# VLC-2.1 and later are x86_64-only: https://trac.videolan.org/vlc/ticket/8161
-universal_variant no
-supported_archs x86_64
+ post-patch {
+ reinplace "s:librsvg-2/librsvg:librsvg:" \
+ ${worksrcpath}/modules/text_renderer/svg.c
-compiler.blacklist gcc-4.2 llvm-gcc-4.2 {clang < 300}
+ if {[string match *clang* ${configure.cxx}] && ${configure.cxx_stdlib} == "libc++"} {
+ reinplace "s:-lstdc\+\+:-lc++:" \
+ ${worksrcpath}/configure.ac \
+ ${worksrcpath}/modules/access/Makefile.am
+ }
+ # patch source using ffmpeg to use the correct header file locations
+ foreach dir {libavcodec libavformat libavresample libavutil libpostproc libswresample libswscale} {
+ foreach module {access codec/avcodec demux/avformat hw/vdpau packetizer video_chroma} {
+ foreach cf [glob -nocomplain ${worksrcpath}/modules/${module}/*.c] {
+ reinplace "s|${dir}/|${dir}-VLC/|g" ${cf}
+ }
+ foreach cf [glob -nocomplain ${worksrcpath}/modules/${module}/*.h] {
+ reinplace "s|${dir}/|${dir}-VLC/|g" ${cf}
+ }
+ }
+ reinplace "s|libpostproc/|libpostproc-VLC/|g" ${worksrcpath}/modules/video_filter/postproc.c
+ reinplace "s|${dir}/|${dir}-VLC/|g" ${worksrcpath}/configure.ac ${worksrcpath}/configure
+ reinplace "s|HAVE_LIBAVUTIL_AV|HAVE_LIBAVUTIL_VLC_AV|g" \
+ ${worksrcpath}/modules/codec/avcodec/avcommon.h \
+ ${worksrcpath}/modules/codec/avcodec/avcommon_compat.h
+ reinplace "s|HAVE_LIBAVFORMAT_AV|HAVE_LIBAVFORMAT_VLC_AV|g" \
+ ${worksrcpath}/modules/codec/avcodec/avcommon.h \
+ ${worksrcpath}/modules/codec/avcodec/avcommon_compat.h
+ reinplace "s|HAVE_LIBAVCODEC_AV|HAVE_LIBAVCODEC_VLC_AV|g" \
+ ${worksrcpath}/modules/codec/avcodec/avcommon.h \
+ ${worksrcpath}/modules/codec/avcodec/avcommon_compat.h
+ reinplace "s|HAVE_LIBSWSCALE_SW|HAVE_LIBSWSCALE_VLC_SW|g" \
+ ${worksrcpath}/modules/codec/avcodec/avcommon.h \
+ ${worksrcpath}/modules/codec/avcodec/avcommon_compat.h
+ }
+ }
+ post-configure {
+ system -W ${worksrcpath} "patch -Np0 -i ${filespath}/patch-static_assert.diff"
+ }
-pre-fetch {
- if {${os.platform} eq "darwin" && ${os.major} < 10} {
- ui_error "${name} ${version} requires Mac OS X 10.6 or greater."
- return -code error "incompatible Mac OS X version"
+ use_autoreconf yes
+ autoreconf.cmd ./bootstrap
+ autoreconf.pre_args
+ autoreconf.args
+ depends_build-append port:libtool port:autoconf port:automake
+
+ configure.env-append \
+ CXXCPP="${configure.cxx} -E"
+ # splice in ffmpeg-VLC's pkgconfig path, hoping that PKG_CONFIG_PATH hasn't been set by anyone else
+ configure.env-append \
+ PKG_CONFIG_PATH=${FFMPEG_VLC_PREFIX}/lib/pkgconfig
+ build.args-append DESTDIR=${worksrcpath}/dest_ignore V=1
+
+ # gl.c:121:3: error: Platform not recognized.
+ configure.cppflags-append -D__unix__=1
+
+ # live555 is installed to a weird location
+ configure.cppflags-append -I${prefix}/lib/live/liveMedia/include
+
+ build.target all
+ destroot.target install
+
+ livecheck.url http://download.videolan.org/pub/videolan/vlc/
+ livecheck.regex
+
+ # Other
+ configure.args-append \
+ --with-contrib=${worksrcpath}/contrib \
+ --disable-debug --disable-update-check --enable-gnutls \
+ --disable-notify --disable-dbus --enable-lua \
+ --disable-gnomevfs --disable-growl --disable-macosx-vlc-app
+
+ # Input Plugins
+ configure.args-append \
+ --enable-dvdnav --enable-dvdread --disable-smbclient --enable-vcdx \
+ --disable-macosx-qtkit --disable-macosx-eyetv --disable-realrtsp \
+ --disable-freerdp --disable-opencv --enable-sftp
+
+ # Mux/Demux Plugins
+ configure.args-append \
+ --enable-dvbpsi --enable-ogg --enable-mux_ogg \
+ --enable-mkv --enable-mod --enable-mpc --disable-shout
+
+ # Codec Plugins
+ configure.args-append \
+ --enable-a52 --enable-faad --enable-flac --enable-live555 \
+ --enable-opus --enable-vorbis --enable-ogg --enable-mad --enable-libass \
+ --enable-dca --enable-png --disable-quicktime --enable-twolame \
+ --enable-speex --enable-theora --enable-x264 --enable-x265 --enable-postproc \
+ --disable-gst-decode --enable-avcodec --enable-avformat --enable-swscale \
+ --disable-fluidsynth --enable-schroedinger --enable-vpx
+
+ # Video Plugins. We do our best to deactivate X11 and disable its auto-detection by
+ # claiming the headers and libs are somewhere they're not.
+ configure.args-append \
+ --disable-caca --enable-sdl --enable-sdl-image \
+ --without-x --disable-xcb --disable-xvideo \
+ --x-includes=${destroot} --x-libraries=${destroot} \
+ --enable-freetype --enable-fontconfig --enable-fribidi \
+ --disable-svg --disable-svgdec
+
+ # Audio Plugins
+ configure.args-append \
+ --disable-jack \
+ --enable-samplerate \
+ --disable-pulse \
+ --disable-chromaprint
+
+ # Interface Plugins
+ configure.args-append \
+ --disable-macosx \
+ --disable-macosx-dialog-provider \
+ --disable-qt \
+ --enable-ncurses \
+ --disable-skins2 \
+ --disable-vnc
+
+ # Visualisations and Video Filter Plugins
+ configure.args-append \
+ --disable-goom
+
+ # Service Discovery Plugins
+ configure.args-append \
+ --enable-bonjour \
+ --enable-upnp
+
+ # 20150209: Jack really would require a newer variant than what's currently in MacPorts
+ variant jack description {Enable jack and fluidsynth plugins for audio output} {
+ depends_lib-append port:jack port:fluidsynth port:portaudio
+ configure.args-delete --disable-jack --disable-fluidsynth
+ configure.args-append --enable-jack --enable-fluidsynth
}
-}
-patchfiles buildfix-package.mak.patch \
- configure.ac-no-arch.patch \
- PR-34741-no__clang_version__.patch \
- static_assert.patch \
- no-sparkle.patch \
- patch-vlc-no-O4.diff \
- patch-opencv_includes.diff
-
-# The opencv example apparently builds on 10.11 but I'm having issues with it on 10.9
-# it doesn't appear to be indispensable, so simply skip it.
-patchfiles-append patch-no-opencv_example.diff
-
-post-patch {
- reinplace "s:librsvg-2/librsvg:librsvg:" \
- ${worksrcpath}/modules/text_renderer/svg.c
-
- if {[string match *clang* ${configure.cxx}] && ${configure.cxx_stdlib} == "libc++"} {
- reinplace "s:-lstdc\+\+:-lc++:" \
- ${worksrcpath}/configure.ac \
- ${worksrcpath}/modules/access/Makefile.am
+ variant dbus description {Enable DBus support} {
+ depends_lib-append port:dbus
+ configure.args-replace --disable-dbus --enable-dbus
}
-}
-use_autoreconf yes
-autoreconf.cmd ./bootstrap
-autoreconf.pre_args
-autoreconf.args
-depends_build-append port:libtool port:autoconf port:automake
-
-configure.env-append CXXCPP="${configure.cxx} -E"
-build.args-append DESTDIR=${worksrcpath}/dest_ignore V=1
-
-# gl.c:121:3: error: Platform not recognized.
-configure.cppflags-append -D__unix__=1
-
-# live555 is installed to a weird location
-configure.cppflags-append -I${prefix}/lib/live/liveMedia/include
-
-build.target all
-destroot.target install
-
-livecheck.url http://download.videolan.org/pub/videolan/vlc/
-livecheck.regex
-
-# Other
-configure.args-append \
- --with-contrib=${worksrcpath}/contrib \
- --disable-debug --disable-update-check --enable-gnutls \
- --disable-notify --disable-dbus --enable-lua \
- --disable-gnomevfs --disable-growl --disable-macosx-vlc-app
-
-# Input Plugins
-configure.args-append \
- --enable-dvdnav --enable-dvdread --disable-smbclient --enable-vcdx \
- --disable-macosx-qtkit --disable-macosx-eyetv --disable-realrtsp \
- --disable-freerdp --enable-opencv --enable-sftp
-
-# Mux/Demux Plugins
-configure.args-append \
- --enable-dvbpsi --enable-ogg --enable-mux_ogg \
- --enable-mkv --enable-mod --enable-mpc --disable-shout
-
-# Codec Plugins
-configure.args-append \
- --enable-a52 --enable-faad --enable-flac --enable-live555 \
- --enable-opus --enable-vorbis --enable-ogg --enable-mad --enable-libass \
- --enable-dca --enable-png --disable-quicktime --enable-twolame \
- --enable-speex --enable-theora --enable-x264 --enable-x265 --enable-postproc \
- --disable-gst-decode --enable-avcodec --enable-avformat --enable-swscale \
- --disable-fluidsynth --enable-schroedinger --enable-vpx
-
-# Video Plugins. We do our best to deactivate X11 and disable its auto-detection by
-# claiming the headers and libs are somewhere they're not.
-configure.args-append \
- --disable-caca --enable-sdl --enable-sdl-image \
- --without-x --disable-xcb --disable-xvideo \
- --x-includes=${destroot} --x-libraries=${destroot} \
- --enable-freetype --enable-fontconfig --enable-fribidi \
- --disable-svg --disable-svgdec
-
-# Audio Plugins
-configure.args-append \
- --disable-jack \
- --enable-samplerate \
- --disable-pulse \
- --disable-chromaprint
-
-# Interface Plugins
-configure.args-append \
- --disable-macosx \
- --disable-macosx-dialog-provider \
- --disable-qt \
- --enable-ncurses \
- --disable-skins2 \
- --disable-vnc
-
-# Visualisations and Video Filter Plugins
-configure.args-append \
- --disable-goom
-
-# Service Discovery Plugins
-configure.args-append \
- --enable-bonjour \
- --enable-upnp
-
-# 20150209: Jack really would require a newer variant than what's currently in MacPorts
-variant jack description {Enable jack and fluidsynth plugins for audio output} {
- depends_lib-append port:jack port:fluidsynth port:portaudio
- configure.args-delete --disable-jack --disable-fluidsynth
- configure.args-append --enable-jack --enable-fluidsynth
-}
+ variant qtkit description {Enable qtcapture and qtaudio} {
+ configure.args-replace --disable-macosx-qtkit --enable-macosx-qtkit
+ }
-variant dbus description {Enable DBus support} {
- depends_lib-append port:dbus
- configure.args-replace --disable-dbus --enable-dbus
-}
+ variant svg description {Enable SVG rendering and decoding support} {
+ depends_lib-append port:librsvg
+ configure.args-replace --disable-svg --enable-svg
+ configure.args-replace --disable-svgdec --enable-svgdec
+ }
-variant qtkit description {Enable qtcapture and qtaudio} {
- configure.args-replace --disable-macosx-qtkit --enable-macosx-qtkit
-}
+ variant shout description {Enable Shoutcast/Icecast streaming output support} {
+ depends_lib-append port:libshout2
+ configure.args-replace --disable-shout --enable-shout
+ }
-variant svg description {Enable SVG rendering and decoding support} {
- depends_lib-append port:librsvg
- configure.args-replace --disable-svg --enable-svg
- configure.args-replace --disable-svgdec --enable-svgdec
-}
+ variant smb description {Enable Samba 3 input support} {
+ depends_lib-append port:samba3
+ configure.args-replace --disable-smbclient --enable-smbclient
+ configure.ldflags-append -L${prefix}/lib/samba3
+ }
-variant shout description {Enable Shoutcast/Icecast streaming output support} {
- depends_lib-append port:libshout2
- configure.args-replace --disable-shout --enable-shout
-}
+ variant pulse description {Enable PulseAudio support} {
+ depends_lib-append port:pulseaudio
+ configure.args-replace --disable-pulse --enable-pulse
+ }
-variant smb description {Enable Samba 3 input support} {
- depends_lib-append port:samba3
- configure.args-replace --disable-smbclient --enable-smbclient
- configure.ldflags-append -L${prefix}/lib/samba3
-}
+ variant x11 {
+ depends_lib-append \
+ port:xorg-libX11 \
+ port:xorg-libXau \
+ port:xorg-libXdmcp \
+ port:xorg-libXext \
+ port:xorg-libXrandr \
+ port:xorg-libxcb \
+ port:xrender \
+ port:XviD \
+ port:mesa \
+ port:xorg-libXinerama \
+ port:xorg-libXv \
+ port:xorg-libXxf86vm \
+ port:xorg-xcb-util \
+ port:xorg-xcb-util-keysyms
+
+ configure.args-delete --without-x --disable-xvideo --disable-xcb \
+ --x-includes=${destroot} --x-libraries=${destroot}
+ configure.args-append --with-x --enable-xvideo --enable-xcb
+ }
-variant pulse description {Enable PulseAudio support} {
- depends_lib-append port:pulseaudio
- configure.args-replace --disable-pulse --enable-pulse
-}
+ if {${subport} ne "lib${name}"} {
+ variant qt4 conflicts qt5 description {Build using Qt4 UI. This will use qt4-mac. Experimental and probably dysfunctional} {
+ patchfiles-append patch-vlc-no-qt5.diff \
+ patch-vlc-qt-configureac.diff \
+ patch-simplepreferences.diff
-variant x11 {
- depends_lib-append \
- port:xorg-libX11 \
- port:xorg-libXau \
- port:xorg-libXdmcp \
- port:xorg-libXext \
- port:xorg-libXrandr \
- port:xorg-libxcb \
- port:xrender \
- port:XviD \
- port:mesa \
- port:xorg-libXinerama \
- port:xorg-libXv \
- port:xorg-libXxf86vm \
- port:xorg-xcb-util \
- port:xorg-xcb-util-keysyms
-
- configure.args-delete --without-x --disable-xvideo --disable-xcb \
- --x-includes=${destroot} --x-libraries=${destroot}
- configure.args-append --with-x --enable-xvideo --enable-xcb
-}
+ configure.args-replace --disable-qt --enable-qt
-if {${subport} ne "lib${name}"} {
- variant qt4 conflicts qt5 description {Build using Qt4 UI. This will use qt4-mac. Experimental and probably dysfunctional} {
- patchfiles-append patch-vlc-no-qt5.diff \
- patch-vlc-qt-configureac.diff \
- patch-simplepreferences.diff
+ PortGroup qt4 1.0
+ }
+ variant qt5 conflicts qt4 description {Build using Qt5 UI. This will use qt5-mac. Experimental and probably dysfunctional} {
+ patchfiles-append patch-vlc-qt-configureac.diff \
+ patch-simplepreferences.diff
- configure.args-replace --disable-qt --enable-qt
+ configure.args-replace --disable-qt --enable-qt
- PortGroup qt4 1.0
+ PortGroup qt5 1.0
+ }
}
- variant qt5 conflicts qt4 description {Build using Qt5 UI. This will use qt5-mac. Experimental and probably dysfunctional} {
- patchfiles-append patch-vlc-qt-configureac.diff \
- patch-simplepreferences.diff
- configure.args-replace --disable-qt --enable-qt
+ variant quartz {
+ depends_lib-delete port:libsamplerate
+ depends_lib-append port:BGHUDAppKit
+
+ patchfiles-append patch-vlc-for-macports.diff
+
+ configure.args-delete --disable-macosx \
+ --enable-samplerate \
+ --disable-realrtsp
+ configure.args-append --enable-macosx
+ # taken from VLC's own configure.sh script for OS X:
+ configure.args-append --disable-samplerate \
+ --enable-merge-ffmpeg \
+ --enable-realrtsp
+ }
- PortGroup qt5 1.0
+ # FreeRDP currently doesn't build with CMake >= 3.1 (#47389)
+ variant freerdp description {Build the FreeRDP support; currently dysfunctional} {
+ depends_lib-append port:FreeRDP
+ # access/rdp.c:45:11: fatal error: 'freerdp/version.h' file not found
+ configure.cppflags-append -DFREERDP_INTERFACE_VERSION \
+ -DFREERDP_VERSION_MAJOR=1 \
+ -DFREERDP_VERSION_MINOR=1
+ configure.args-replace --disable-freerdp --enable-freerdp
}
-}
-variant quartz {
- depends_lib-delete port:libsamplerate
- depends_lib-append port:BGHUDAppKit
-
- patchfiles-append patch-vlc-for-macports.diff
-
- configure.args-delete --disable-macosx \
- --enable-samplerate \
- --disable-realrtsp
- configure.args-append --enable-macosx
- # taken from VLC's own configure.sh script for OS X:
- configure.args-append --disable-samplerate \
- --enable-merge-ffmpeg \
- --enable-realrtsp
-}
+ variant huge \
+ requires jack shout svg \
+ description {Enable all variants except quartz, smb, freerdp and x11} {}
-# FreeRDP currently doesn't build with CMake >= 3.1 (#47389)
-variant freerdp description {Build the FreeRDP support; currently dysfunctional} {
- depends_lib-append port:FreeRDP
- # access/rdp.c:45:11: fatal error: 'freerdp/version.h' file not found
- configure.cppflags-append -DFREERDP_INTERFACE_VERSION \
- -DFREERDP_VERSION_MAJOR=1 \
- -DFREERDP_VERSION_MINOR=1
- configure.args-replace --disable-freerdp --enable-freerdp
-}
+ if {${subport} ne "lib${name}"} {
+ variant full \
+ requires huge quartz smb x11 \
+ description {Enable all variants except x11 (and except freerdp, currently)} {}
+ } else {
+ variant full \
+ requires huge quartz smb \
+ description {Enable all variants (except freerdp, currently)} {}
+ }
+
+ # this patchfile can probably go with VLC 2.2.2, or should be reviewed then.
+ # update 2.2.2 : lua 5.3 gives compiler syntax errors so we stick with 5.2 for now.
+ patchfiles-append patch-for-lua52.diff
+
+ platform macosx {
+ default_variants-append +quartz +qtkit
+
+ configure.args-replace --disable-macosx-eyetv --enable-macosx-eyetv
+
+ if {${subport} ne "lib${name}"} {
+ configure.args-replace --disable-macosx-vlc-app --enable-macosx-vlc-app
+ }
+
+ post-patch {
+ reinplace "s/Appkit/AppKit/" ${worksrcpath}/configure.ac
+ reinplace "/Sparkle.framework/d" \
+ ${worksrcpath}/extras/package/macosx/vlc.xcodeproj/project.pbxproj
+ reinplace "/SDKROOT/d" \
+ ${worksrcpath}/extras/package/macosx/vlc.xcodeproj/project.pbxproj
+ reinplace "/Growl.framework/d" \
+ ${worksrcpath}/extras/package/macosx/package.mak
+
+ reinplace "s:LD_LIBRARY_PATH:DYLD_LIBRARY_PATH:g" \
+ ${worksrcpath}/Makefile.am
+
+ reinplace "/argv/s/environ/*_NSGetEnviron()/" \
+ ${worksrcpath}/modules/misc/inhibit/xdg.c \
+ ${worksrcpath}/modules/stream_filter/decomp.c
+
+ reinplace "s/extern char \\*\\*environ;/#include /" \
+ ${worksrcpath}/modules/misc/inhibit/xdg.c \
+ ${worksrcpath}/modules/stream_filter/decomp.c
+
+ if {![file exists ${worksrcpath}/contrib/BGHUDAppKit.framework]} {
+ ln -s ${frameworks_dir}/BGHUDAppKit.framework ${worksrcpath}/contrib/BGHUDAppKit.framework
+ }
+
+ # To trick configure
+ file mkdir "${worksrcpath}/contrib/lib"
+ }
-variant huge \
- requires jack shout svg \
- description {Enable all variants except quartz, smb, freerdp and x11} {}
-
-if {${subport} ne "lib${name}"} {
- variant full \
- requires huge quartz smb x11 \
- description {Enable all variants except x11 (and except freerdp, currently)} {}
-} else {
- variant full \
- requires huge quartz smb \
- description {Enable all variants (except freerdp, currently)} {}
+ post-destroot {
+ eval file delete [glob ${destroot}${prefix}/lib/vlc/plugins/*/*.la]
+
+ if {[variant_isset qt4] || [variant_isset qt5] || [variant_isset quartz]} {
+ if {${subport} ne "lib${name}"} {
+ copy ${worksrcpath}/VLC.app ${destroot}${applications_dir}/VLC.app
+
+ # These are already in ${prefix}, so we don't need to bundle them as well
+ delete ${destroot}${applications_dir}/VLC.app/Contents/Frameworks
+ delete ${destroot}${applications_dir}/VLC.app/Contents/lib
+
+ # There's no need to install these into the bundle and the prefix
+ delete ${destroot}${applications_dir}/VLC.app/Contents/MacOS/include
+ delete ${destroot}${applications_dir}/VLC.app/Contents/MacOS/lib
+ delete ${destroot}${applications_dir}/VLC.app/Contents/MacOS/plugins
+ delete ${destroot}${applications_dir}/VLC.app/Contents/MacOS/share/locale
+ delete ${destroot}${applications_dir}/VLC.app/Contents/MacOS/share/lua
+
+ # http://trac.macports.org/ticket/35131
+ ln -s ${prefix}/lib ${destroot}${applications_dir}/VLC.app/Contents/MacOS/lib
+ ln -s ${prefix}/lib/vlc/plugins ${destroot}${applications_dir}/VLC.app/Contents/MacOS/plugins
+ ln -s ${prefix}/lib/vlc/lua ${destroot}${applications_dir}/VLC.app/Contents/MacOS/share/lua
+ ln -s ${prefix}/share/locale ${destroot}${applications_dir}/VLC.app/Contents/MacOS/share/locale
+
+ # the vlc executable needs to be started with a full path to the app bundle executable
+ # or else the Mac OS X interface will hang beyond even a ^C or ^\ :
+ move ${destroot}${prefix}/bin/vlc ${destroot}${prefix}/bin/vlc.exe
+ system "echo \"#!/bin/sh\nexec \\\"${applications_dir}/VLC.app/Contents/MacOS/VLC\\\" \\\"\\\$\@\\\"\" > ${destroot}${prefix}/bin/vlc"
+ system "chmod 755 ${destroot}${prefix}/bin/vlc"
+ } else {
+ delete ${destroot}${prefix}/bin
+ delete ${destroot}${prefix}/share/applications
+ delete ${destroot}${prefix}/share/man
+ }
+ }
+ }
+ post-activate {
+ if {[variant_isset qt4] || [variant_isset qt5]} {
+ notes-append "The Qt interface modules for VLC are currently dysfunctional. If you encounter bugs with them, please file them with VLC and not MacPorts."
+ }
+ system "${prefix}/lib/vlc/vlc-cache-gen -f ${prefix}/lib/vlc"
+ }
+ }
}
-# this patchfile can probably go with VLC 2.2.2, or should be reviewed then.
-# update 2.2.2 : lua 5.3 gives compiler syntax errors so we stick with 5.2 for now.
-patchfiles-append patch-for-lua52.diff
+##
+################# support port ffmpeg-VLC ##################
+##
+if {${subport} eq "ffmpeg-VLC"} {
+ PortGroup xcodeversion 1.0
+
+ version 2.8.6
+ revision 1
+ license LGPL-2.1+
+ categories multimedia
+ maintainers gmail.com:rjvbertin openmaintainer
-platform macosx {
- default_variants-append +quartz +qtkit
+ description Custom FFMpeg build for port:VLC and port:libVLC.
+ long_description Custom FFMpeg build for port:VLC and port:libVLC.
- configure.args-replace --disable-macosx-eyetv --enable-macosx-eyetv
+ platforms darwin
+ homepage http://www.ffmpeg.org/
+ master_sites http://www.ffmpeg.org/releases/
+
+ use_bzip2 yes
+ distname ffmpeg-${version}
+
+ checksums rmd160 5b61b6b0521d39ca31dcfb7fff1dfa26d9e7667a \
+ sha256 40611e329bc354592c6f8f1deb033c31b91f80e91f5707ca4f9afceca78d8e62
+
+ depends_build port:pkgconfig \
+ port:gmake
+
+# libvpx is static only so can be considered a build dependency (#47934)
+
+ depends_build-append \
+ port:libvpx
+
+ depends_lib port:lame \
+ port:libiconv \
+ port:openjpeg15 \
+ port:xz \
+ port:zlib
+
+# depends_lib-append port:libvorbis \
+# port:libopus \
+# port:libogg \
+# port:libtheora \
+# port:libass \
+# port:gnutls \
+# port:fontconfig \
+# port:freetype \
+# port:bzip2
+
+ build.cmd ${prefix}/bin/gmake
+ build.env-append V=1
+
+#
+# enable auto configure of asm optimizations
+# requires Xcode 3.1 or better on Leopard
+#
+ minimum_xcodeversions {9 3.1}
+
+ if {[lsearch [get_canonical_archs] i386] != -1} {
+ # clang-3.1 hits https://trac.macports.org/ticket/30137 ()
+ # clang-139 hits https://trac.macports.org/ticket/38141
+ compiler.blacklist-append {clang < 422.1.7}
+ }
- if {${subport} ne "lib${name}"} {
- configure.args-replace --disable-macosx-vlc-app --enable-macosx-vlc-app
+ configure.cflags-append -DHAVE_LRINTF ${configure.cppflags}
+ configure.args --prefix=${FFMPEG_VLC_PREFIX} \
+ --progs-suffix=-VLC \
+ --build-suffix=-VLC \
+ --disable-doc \
+ --disable-encoder=vorbis \
+ --enable-libopenjpeg \
+ --disable-debug \
+ --disable-avdevice \
+ --disable-devices \
+ --disable-avfilter \
+ --disable-filters \
+ --disable-protocol=concat \
+ --disable-bsfs \
+ --disable-bzlib \
+ --enable-avresample \
+ --enable-libmp3lame \
+ --enable-libvpx \
+ --disable-libbluray \
+ --disable-sdl \
+ --disable-libxcb --disable-libxcb-shm --disable-libxcb-xfixes --disable-libxcb-shape \
+ --enable-shared --disable-static --enable-pthreads \
+ --cc=${configure.cc}
+
+# this is the old gpl2 variant. VLC is GPL2'ed, so we can just as well build ffmpeg
+# with these components.
+ configure.args-append \
+ --enable-gpl \
+ --enable-postproc
+# configure.args-append \
+# --enable-libx264 \
+# --enable-libxvid
+# depends_lib-append port:XviD \
+# port:x264
+
+ configure.args-append \
+ --arch=${configure.build_arch}
+ configure.env-append \
+ ASFLAGS='[get_canonical_archflags]'
+ if {${build_arch} eq "x86_64"} {
+ depends_build-append \
+ port:yasm
+ configure.args-append \
+ --enable-yasm
}
- post-patch {
- reinplace "s/Appkit/AppKit/" ${worksrcpath}/configure.ac
- reinplace "/Sparkle.framework/d" \
- ${worksrcpath}/extras/package/macosx/vlc.xcodeproj/project.pbxproj
- reinplace "/SDKROOT/d" \
- ${worksrcpath}/extras/package/macosx/vlc.xcodeproj/project.pbxproj
- reinplace "/Growl.framework/d" \
- ${worksrcpath}/extras/package/macosx/package.mak
-
- reinplace "s:LD_LIBRARY_PATH:DYLD_LIBRARY_PATH:g" \
- ${worksrcpath}/Makefile.am
-
- reinplace "/argv/s/environ/*_NSGetEnviron()/" \
- ${worksrcpath}/modules/misc/inhibit/xdg.c \
- ${worksrcpath}/modules/stream_filter/decomp.c
-
- reinplace "s/extern char \\*\\*environ;/#include /" \
- ${worksrcpath}/modules/misc/inhibit/xdg.c \
- ${worksrcpath}/modules/stream_filter/decomp.c
+ license GPL-2+
- if {![file exists ${worksrcpath}/contrib/BGHUDAppKit.framework]} {
- ln -s ${frameworks_dir}/BGHUDAppKit.framework ${worksrcpath}/contrib/BGHUDAppKit.framework
+ platform darwin {
+ if {${os.major} < 9} {
+ configure.args-append --disable-asm
}
- # To trick configure
- file mkdir "${worksrcpath}/contrib/lib"
- }
+ # VDA (video hardware acceleration, mostly H264) is only supported on 10.6.3+ up to (excluding) 10.11.
+ #if {(${os.major} > 10 || (${os.major} == 10 && ${os.minor} >= 3)) && (${os.major} < 15)}
+ # Due to a bug in ffmpeg(?), we have to enable VDA on 10.11 as well, even though it shouldn't be supported.
+ # More information: https://github.com/mpv-player/mpv/issues/2299
+ if {${os.major} > 10 || (${os.major} == 10 && ${os.minor} >= 3)} {
+ configure.args-delete --disable-vda
+ configure.args-append --enable-vda
+ }
- post-destroot {
- eval file delete [glob ${destroot}${prefix}/lib/vlc/plugins/*/*.la]
+ # VideotoolBox, a new hardware acceleration framework, is supported on 10.8+ and "here to stay".
+ # It provides support for H264, H263, MPEG1, MPEG2 and MPEG4.
+ if {${os.major} > 11} {
+ configure.args-delete --disable-videotoolbox
+ configure.args-append --enable-videotoolbox
+ }
- if {[variant_isset qt4] || [variant_isset qt5] || [variant_isset quartz]} {
- if {${subport} ne "lib${name}"} {
- copy ${worksrcpath}/VLC.app ${destroot}${applications_dir}/VLC.app
-
- # These are already in ${prefix}, so we don't need to bundle them as well
- delete ${destroot}${applications_dir}/VLC.app/Contents/Frameworks
- delete ${destroot}${applications_dir}/VLC.app/Contents/lib
-
- # There's no need to install these into the bundle and the prefix
- delete ${destroot}${applications_dir}/VLC.app/Contents/MacOS/include
- delete ${destroot}${applications_dir}/VLC.app/Contents/MacOS/lib
- delete ${destroot}${applications_dir}/VLC.app/Contents/MacOS/plugins
- delete ${destroot}${applications_dir}/VLC.app/Contents/MacOS/share/locale
- delete ${destroot}${applications_dir}/VLC.app/Contents/MacOS/share/lua
-
- # http://trac.macports.org/ticket/35131
- ln -s ${prefix}/lib ${destroot}${applications_dir}/VLC.app/Contents/MacOS/lib
- ln -s ${prefix}/lib/vlc/plugins ${destroot}${applications_dir}/VLC.app/Contents/MacOS/plugins
- ln -s ${prefix}/lib/vlc/lua ${destroot}${applications_dir}/VLC.app/Contents/MacOS/share/lua
- ln -s ${prefix}/share/locale ${destroot}${applications_dir}/VLC.app/Contents/MacOS/share/locale
-
- # the vlc executable needs to be started with a full path to the app bundle executable
- # or else the Mac OS X interface will hang beyond even a ^C or ^\ :
- move ${destroot}${prefix}/bin/vlc ${destroot}${prefix}/bin/vlc.exe
- system "echo \"#!/bin/sh\nexec \\\"${applications_dir}/VLC.app/Contents/MacOS/VLC\\\" \\\"\\\$\@\\\"\" > ${destroot}${prefix}/bin/vlc"
- system "chmod 755 ${destroot}${prefix}/bin/vlc"
- } else {
- delete ${destroot}${prefix}/bin
- delete ${destroot}${prefix}/share/applications
- delete ${destroot}${prefix}/share/man
- }
+ # Apple GCC has problems with SIMD intrinsics and -Werror=no-missing-prototypes.
+ if {${os.major} < 11} {
+ patchfiles-append patch-configure-no-error-on-missing-prototypes.diff
+ }
+
+ # kCVPixelFormatType_OneComponent8 used in avfoundation indev is only available on 10.8+
+ if {${os.major} < 12} {
+ configure.args-append --disable-indev=avfoundation
}
}
- post-activate {
- if {[variant_isset qt4] || [variant_isset qt5]} {
- notes-append "The Qt interface modules for VLC are currently dysfunctional. If you encounter bugs with them, please file them with VLC and not MacPorts."
+
+#
+# configure isn't autoconf and they do use a dep cache
+#
+
+ platform darwin 8 {
+ post-patch {
+ reinplace "s:,-compatibility_version,$\(LIBMAJOR\)::" ${worksrcpath}/configure
+ }
+ }
+
+ destroot.target install-libs install-headers
+
+ post-destroot {
+ file delete -force ${destroot}${prefix}/share/examples
+ # We need to make sure that the linker will use our libraries and not one
+ # from a location like ${prefix}/lib . That's why we use --build-suffix, but
+ # that still requires us to provide pkg-config files with the standard names:
+ foreach pc [glob ${destroot}${FFMPEG_VLC_PREFIX}/lib/pkgconfig/*.pc] {
+ set standardname [strsed ${pc} "s/-VLC.pc/.pc/"]
+ ln -s [file tail ${pc}] ${standardname}
+ }
+ # oblige dependent code to include files from our own renamed header file directories, so it
+ # cannot include mismatching headers by accident (e.g. those from ffmpeg 3.x).
+ foreach dir {libavcodec libavformat libavresample libavutil libpostproc libswresample libswscale} {
+ file rename ${destroot}${FFMPEG_VLC_PREFIX}/include/${dir} ${destroot}${FFMPEG_VLC_PREFIX}/include/${dir}-VLC
}
- system "${prefix}/lib/vlc/vlc-cache-gen -f ${prefix}/lib/vlc"
+ foreach dir {libavcodec libavformat libavresample libavutil libpostproc libswresample libswscale} {
+ foreach header [glob -nocomplain ${destroot}${FFMPEG_VLC_PREFIX}/include/*/*.h] {
+ reinplace "s|${dir}/|${dir}-VLC/|g" ${header}
+ }
+ }
+ # packageable: ${destroot}${FFMPEG_VLC_PREFIX}/{include,lib/lib*VLC.dylib,lib/pkgconfig}
}
+
+ livecheck.type regex
+ livecheck.url ${master_sites}
+ livecheck.regex "${name}-(\\d+(?:\\.\\d+)*)${extract.suffix}"
}
# kate: backspace-indents true; indent-pasted-text true; indent-width 4; keep-extra-spaces true; remove-trailing-spaces modified; replace-tabs true; replace-tabs-save true; syntax Tcl/Tk; tab-indents true; tab-width 4;