Opened 15 years ago

Closed 13 years ago

#21079 closed defect (fixed)

transfig does not install fig2dev

Reported by: link@… Owned by: macports-tickets@…
Priority: Normal Milestone:
Component: ports Version: 1.8.0
Keywords: Cc:
Port: transfig

Description (last modified by tobypeterson)

Hi,

I'm trying to install transfig, which appeared to install fine with the sudo port install transfig command. However, I can't use any of the commands (I just get a `command not found' error). Is there something I have to do to compile or run it? If I do a port contents transfig, I come up with some .gz files (listed below) - do they need to be unzipped? All the steps I've done with output are listed below.

Sorry, I'm obviously new to this. Thanks, Natasha

Unknown-00-19-e3-06-86-65:bin bluescharm$ sudo port install transfig
Password:
--->  Computing dependencies for transfig
--->  Fetching perl5.8
--->  Attempting to fetch perl-5.8.9.tar.bz2 from http://arn.se.distfiles.macports.org/perl5.8
--->  Verifying checksum(s) for perl5.8
--->  Extracting perl5.8
--->  Applying patches to perl5.8
--->  Configuring perl5.8
--->  Building perl5.8
--->  Staging perl5.8 into destroot
--->  Installing perl5.8 @5.8.9_3
--->  Activating perl5.8 @5.8.9_3
--->  Cleaning perl5.8
--->  Fetching perl5
--->  Verifying checksum(s) for perl5
--->  Extracting perl5
--->  Configuring perl5
--->  Building perl5
--->  Staging perl5 into destroot
--->  Installing perl5 @5.8.9_0
--->  Activating perl5 @5.8.9_0
--->  Cleaning perl5
--->  Fetching pkgconfig
--->  Attempting to fetch pkg-config-0.23.tar.gz from http://arn.se.distfiles.macports.org/pkgconfig
--->  Verifying checksum(s) for pkgconfig
--->  Extracting pkgconfig
--->  Configuring pkgconfig
--->  Building pkgconfig
--->  Staging pkgconfig into destroot
--->  Installing pkgconfig @0.23_1
--->  Activating pkgconfig @0.23_1
--->  Cleaning pkgconfig
--->  Fetching xorg-cf-files
--->  Attempting to fetch xorg-cf-files-1.0.2.tar.bz2 from http://kent.dl.sourceforge.net/fink
--->  Verifying checksum(s) for xorg-cf-files
--->  Extracting xorg-cf-files
--->  Applying patches to xorg-cf-files
--->  Configuring xorg-cf-files
--->  Building xorg-cf-files
--->  Staging xorg-cf-files into destroot
--->  Installing xorg-cf-files @1.0.2_3
--->  Activating xorg-cf-files @1.0.2_3
--->  Cleaning xorg-cf-files
--->  Fetching xorg-xproto
--->  Attempting to fetch xproto-7.0.15.tar.bz2 from http://arn.se.distfiles.macports.org/xorg-xproto
--->  Verifying checksum(s) for xorg-xproto
--->  Extracting xorg-xproto
--->  Configuring xorg-xproto
--->  Building xorg-xproto
--->  Staging xorg-xproto into destroot
--->  Installing xorg-xproto @7.0.15_0
--->  Activating xorg-xproto @7.0.15_0
--->  Cleaning xorg-xproto
--->  Fetching imake
--->  Attempting to fetch imake-1.0.2.tar.bz2 from http://kent.dl.sourceforge.net/fink
--->  Verifying checksum(s) for imake
--->  Extracting imake
--->  Configuring imake
--->  Building imake
--->  Staging imake into destroot
--->  Installing imake @1.0.2_1
--->  Activating imake @1.0.2_1
--->  Cleaning imake
--->  Fetching zlib
--->  Attempting to fetch zlib-1.2.3.tar.bz2 from http://www.gzip.org/zlib/
--->  Verifying checksum(s) for zlib
--->  Extracting zlib
--->  Applying patches to zlib
--->  Configuring zlib
--->  Building zlib
--->  Staging zlib into destroot
--->  Installing zlib @1.2.3_2
--->  Activating zlib @1.2.3_2
--->  Cleaning zlib
--->  Fetching libpng
--->  Attempting to fetch libpng-1.2.38.tar.bz2 from http://kent.dl.sourceforge.net/libpng
--->  Verifying checksum(s) for libpng
--->  Extracting libpng
--->  Configuring libpng
--->  Building libpng
--->  Staging libpng into destroot
--->  Installing libpng @1.2.38_0
--->  Activating libpng @1.2.38_0
--->  Cleaning libpng
--->  Fetching jpeg
--->  Attempting to fetch jpegsrc.v6b.tar.gz from http://arn.se.distfiles.macports.org/jpeg
--->  Attempting to fetch droppatch.tar.gz from http://sylvana.net/jpegcrop/
--->  Attempting to fetch droppatch.tar.gz from http://arn.se.distfiles.macports.org/jpeg
--->  Verifying checksum(s) for jpeg
--->  Extracting jpeg
--->  Applying patches to jpeg
--->  Configuring jpeg
--->  Building jpeg
--->  Staging jpeg into destroot
--->  Installing jpeg @6b_3
--->  Activating jpeg @6b_3
--->  Cleaning jpeg
--->  Fetching jasper
--->  Attempting to fetch jasper-1.900.1.zip from http://arn.se.distfiles.macports.org/jasper
--->  Verifying checksum(s) for jasper
--->  Extracting jasper
--->  Applying patches to jasper
--->  Configuring jasper
--->  Building jasper
--->  Staging jasper into destroot
--->  Installing jasper @1.900.1_4
--->  Activating jasper @1.900.1_4
--->  Cleaning jasper
--->  Fetching tiff
--->  Attempting to fetch tiff-3.8.2.tar.gz from ftp://ftp.uk.FreeBSD.org/pub/FreeBSD/ports/distfiles/
--->  Verifying checksum(s) for tiff
--->  Extracting tiff
--->  Applying patches to tiff
--->  Configuring tiff
--->  Building tiff
--->  Staging tiff into destroot
--->  Installing tiff @3.8.2_3+macosx
--->  Activating tiff @3.8.2_3+macosx
--->  Cleaning tiff
--->  Fetching netpbm
--->  Attempting to fetch netpbm-10.26.61.tgz from http://kent.dl.sourceforge.net/netpbm
--->  Verifying checksum(s) for netpbm
--->  Extracting netpbm
--->  Applying patches to netpbm
--->  Configuring netpbm
--->  Building netpbm
--->  Staging netpbm into destroot
--->  Installing netpbm @10.26.61_0+darwin
--->  Activating netpbm @10.26.61_0+darwin
--->  Cleaning netpbm
--->  Fetching transfig
--->  Attempting to fetch transfig.3.2.5.tar.gz from http://arn.se.distfiles.macports.org/transfig
--->  Verifying checksum(s) for transfig
--->  Extracting transfig
--->  Applying patches to transfig
--->  Configuring transfig
--->  Building transfig
--->  Staging transfig into destroot
--->  Installing transfig @3.2.5_2
--->  Activating transfig @3.2.5_2
--->  Cleaning transfig

Unknown-00-19-e3-06-86-65:~ bluescharm$ fig2dev -L gif ~/Desktop/figcolor.fig ~/Desktop/figcolor.gif
-bash: fig2dev: command not found

Unknown-00-19-e3-06-86-65:man1 bluescharm$ port contents transfig
Port transfig contains:
  /opt/local/bin/transfig
  /opt/local/share/man/man1/fig2dev.1.gz
  /opt/local/share/man/man1/fig2ps2tex.1.gz
  /opt/local/share/man/man1/pic2tpic.1.gz
  /opt/local/share/man/man1/transfig.1.gz
Unknown-00-19-e3-06-86-65:man1 bluescharm$ 

Change History (7)

comment:1 Changed 15 years ago by tobypeterson

Description: modified (diff)

comment:2 Changed 15 years ago by tobypeterson

Version: 1.8.0

Run sudo port uninstall transfig, then attach the output of sudo port -d install transfig

comment:3 Changed 15 years ago by nerdling (Jeremy Lavergne)

Owner: changed from macports-tickets@… to pguyot@…
# to make transfig and fig2dev:
# type "xmkmf", "make Makefiles", "make" then "make install"

The portfile does not do this. A debug build won't help.

comment:4 in reply to:  3 Changed 15 years ago by link@…

Replying to snc@…:

# to make transfig and fig2dev:
# type "xmkmf", "make Makefiles", "make" then "make install"

The portfile does not do this. A debug build won't help.

thank you!!

comment:5 Changed 13 years ago by jmroot (Joshua Root)

Summary: Port not fully installed?transfig does not install fig2dev
Version: 1.8.0

comment:6 Changed 13 years ago by jmroot (Joshua Root)

Owner: changed from pguyot@… to macports-tickets@…

comment:7 in reply to:  3 Changed 13 years ago by jmroot (Joshua Root)

Resolution: fixed
Status: newclosed

Replying to snc@…:

# to make transfig and fig2dev:
# type "xmkmf", "make Makefiles", "make" then "make install"

The portfile does not do this.

Yes it does (and always did AFAICT). A missing dependency was causing fig2dev to be omitted, so this should have been fixed by r60445.

Note: See TracTickets for help on using tickets.