Opened 14 years ago

Closed 11 years ago

#24405 closed defect (fixed)

pandoc-1.2.1 build failure

Reported by: agladysh@… Owned by: singingwolfboy@…
Priority: Normal Milestone:
Component: ports Version: 1.8.2
Keywords: Cc: antony.stubbs@…, macports@…, arto.bendiken@…, Oliver.Schrenk@…, marklivingstone (Mark Livingstone), jgm@…, lincoln@…
Port: pandoc

Description

OS X 10.6.3, MacPorts 1.8.2

$ sudo port -d install pandoc
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/pandoc
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/pandoc
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: not using configure, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port pandoc.
DEBUG: Requested variant i386 is not provided by port pandoc.
DEBUG: Requested variant macosx is not provided by port pandoc.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmp
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gmp 5.0.1_0 exists in the ports tree
DEBUG: gmp 5.0.1_0  is the latest installed
DEBUG: gmp 5.0.1_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmp
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gmp.
DEBUG: Requested variant i386 is not provided by port gmp.
DEBUG: Requested variant macosx is not provided by port gmp.
DEBUG: No need to upgrade! gmp 5.0.1_0 >= gmp 5.0.1_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/ghc
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ghc 6.10.4_2 exists in the ports tree
DEBUG: ghc 6.10.4_2 +darwin_10 is the latest installed
DEBUG: ghc 6.10.4_2 +darwin_10 is active
DEBUG: Merging existing variants darwin_10 into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/ghc
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port ghc.
DEBUG: Requested variant i386 is not provided by port ghc.
DEBUG: Requested variant macosx is not provided by port ghc.
DEBUG: Executing variant darwin_10 provides darwin_10
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: autoconf 2.65_1 exists in the ports tree
DEBUG: autoconf 2.65_1  is the latest installed
DEBUG: autoconf 2.65_1  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port autoconf.
DEBUG: Requested variant i386 is not provided by port autoconf.
DEBUG: Requested variant macosx is not provided by port autoconf.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: perl5 5.8.9_0 exists in the ports tree
DEBUG: perl5 5.8.9_0  is the latest installed
DEBUG: perl5 5.8.9_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: not using configure, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port perl5.
DEBUG: Requested variant i386 is not provided by port perl5.
DEBUG: Requested variant macosx is not provided by port perl5.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: perl5.8 5.8.9_3 exists in the ports tree
DEBUG: perl5.8 5.8.9_3  is the latest installed
DEBUG: perl5.8 5.8.9_3  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port perl5.8.
DEBUG: Requested variant i386 is not provided by port perl5.8.
DEBUG: Requested variant macosx is not provided by port perl5.8.
DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3
DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: m4 1.4.14_0 exists in the ports tree
DEBUG: m4 1.4.14_0  is the latest installed
DEBUG: m4 1.4.14_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port m4.
DEBUG: Requested variant i386 is not provided by port m4.
DEBUG: Requested variant macosx is not provided by port m4.
DEBUG: No need to upgrade! m4 1.4.14_0 >= m4 1.4.14_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: help2man 1.37.1_1 exists in the ports tree
DEBUG: help2man 1.37.1_1  is the latest installed
DEBUG: help2man 1.37.1_1  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port help2man.
DEBUG: Requested variant i386 is not provided by port help2man.
DEBUG: Requested variant macosx is not provided by port help2man.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: p5-locale-gettext 1.05_2 exists in the ports tree
DEBUG: p5-locale-gettext 1.05_2  is the latest installed
DEBUG: p5-locale-gettext 1.05_2  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port p5-locale-gettext.
DEBUG: Requested variant i386 is not provided by port p5-locale-gettext.
DEBUG: Requested variant macosx is not provided by port p5-locale-gettext.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gettext 0.17_4 exists in the ports tree
DEBUG: gettext 0.17_4  is the latest installed
DEBUG: gettext 0.17_4  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gettext.
DEBUG: Requested variant i386 is not provided by port gettext.
DEBUG: Requested variant macosx is not provided by port gettext.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: libiconv 1.13.1_0 exists in the ports tree
DEBUG: libiconv 1.13.1_0  is the latest installed
DEBUG: libiconv 1.13.1_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port libiconv.
DEBUG: Requested variant i386 is not provided by port libiconv.
DEBUG: Requested variant macosx is not provided by port libiconv.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: gperf 3.0.4_0 exists in the ports tree
DEBUG: gperf 3.0.4_0  is the latest installed
DEBUG: gperf 3.0.4_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port gperf.
DEBUG: Requested variant i386 is not provided by port gperf.
DEBUG: Requested variant macosx is not provided by port gperf.
DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0
DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncurses 5.7_0 exists in the ports tree
DEBUG: ncurses 5.7_0 +darwin_10 is the latest installed
DEBUG: ncurses 5.7_0 +darwin_10 is active
DEBUG: Merging existing variants darwin_10 into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port ncurses.
DEBUG: Requested variant i386 is not provided by port ncurses.
DEBUG: Requested variant macosx is not provided by port ncurses.
DEBUG: Executing variant darwin_10 provides darwin_10
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: ncursesw 5.7_0 exists in the ports tree
DEBUG: ncursesw 5.7_0 +darwin_10 is the latest installed
DEBUG: ncursesw 5.7_0 +darwin_10 is active
DEBUG: Merging existing variants darwin_10 into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: universal variant already exists, so not adding the default one
DEBUG: Requested variant darwin is not provided by port ncursesw.
DEBUG: Requested variant i386 is not provided by port ncursesw.
DEBUG: Requested variant macosx is not provided by port ncursesw.
DEBUG: Executing variant darwin_10 provides darwin_10
DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: expat 2.0.1_0 exists in the ports tree
DEBUG: expat 2.0.1_0  is the latest installed
DEBUG: expat 2.0.1_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port expat.
DEBUG: Requested variant i386 is not provided by port expat.
DEBUG: Requested variant macosx is not provided by port expat.
DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4
DEBUG: No need to upgrade! p5-locale-gettext 1.05_2 >= p5-locale-gettext 1.05_2
DEBUG: No need to upgrade! help2man 1.37.1_1 >= help2man 1.37.1_1
DEBUG: No need to upgrade! autoconf 2.65_1 >= autoconf 2.65_1
DEBUG: No need to upgrade! ghc 6.10.4_2 >= ghc 6.10.4_2
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/hs-haddock
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: hs-haddock 2.5.0_1 exists in the ports tree
DEBUG: hs-haddock 2.5.0_1  is the latest installed
DEBUG: hs-haddock 2.5.0_1  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/hs-haddock
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port hs-haddock.
DEBUG: Requested variant i386 is not provided by port hs-haddock.
DEBUG: Requested variant macosx is not provided by port hs-haddock.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/hs-ghc-paths
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: hs-ghc-paths 0.1.0.6_0 exists in the ports tree
DEBUG: hs-ghc-paths 0.1.0.6_0  is the latest installed
DEBUG: hs-ghc-paths 0.1.0.6_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/hs-ghc-paths
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/haskell-1.0.tcl
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port hs-ghc-paths.
DEBUG: Requested variant i386 is not provided by port hs-ghc-paths.
DEBUG: Requested variant macosx is not provided by port hs-ghc-paths.
DEBUG: No need to upgrade! hs-ghc-paths 0.1.0.6_0 >= hs-ghc-paths 0.1.0.6_0
DEBUG: No need to upgrade! hs-haddock 2.5.0_1 >= hs-haddock 2.5.0_1
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/hs-zip-archive
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: hs-zip-archive 0.1.1.6_0 exists in the ports tree
DEBUG: hs-zip-archive 0.1.1.6_0  is the latest installed
DEBUG: hs-zip-archive 0.1.1.6_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/hs-zip-archive
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/haskell-1.0.tcl
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port hs-zip-archive.
DEBUG: Requested variant i386 is not provided by port hs-zip-archive.
DEBUG: Requested variant macosx is not provided by port hs-zip-archive.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/hs-binary
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: hs-binary 0.5.0.2_0 exists in the ports tree
DEBUG: hs-binary 0.5.0.2_0  is the latest installed
DEBUG: hs-binary 0.5.0.2_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/hs-binary
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/haskell-1.0.tcl
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port hs-binary.
DEBUG: Requested variant i386 is not provided by port hs-binary.
DEBUG: Requested variant macosx is not provided by port hs-binary.
DEBUG: No need to upgrade! hs-binary 0.5.0.2_0 >= hs-binary 0.5.0.2_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/hs-digest
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: hs-digest 0.0.0.8_0 exists in the ports tree
DEBUG: hs-digest 0.0.0.8_0  is the latest installed
DEBUG: hs-digest 0.0.0.8_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/hs-digest
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/haskell-1.0.tcl
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port hs-digest.
DEBUG: Requested variant i386 is not provided by port hs-digest.
DEBUG: Requested variant macosx is not provided by port hs-digest.
DEBUG: No need to upgrade! hs-digest 0.0.0.8_0 >= hs-digest 0.0.0.8_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/hs-zlib
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: hs-zlib 0.5.2.0_0 exists in the ports tree
DEBUG: hs-zlib 0.5.2.0_0  is the latest installed
DEBUG: hs-zlib 0.5.2.0_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/hs-zlib
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/haskell-1.0.tcl
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port hs-zlib.
DEBUG: Requested variant i386 is not provided by port hs-zlib.
DEBUG: Requested variant macosx is not provided by port hs-zlib.
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: zlib 1.2.4_1 exists in the ports tree
DEBUG: zlib 1.2.4_1  is the latest installed
DEBUG: zlib 1.2.4_1  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: adding the default universal variant
DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
DEBUG: Requested variant darwin is not provided by port zlib.
DEBUG: Requested variant i386 is not provided by port zlib.
DEBUG: Requested variant macosx is not provided by port zlib.
DEBUG: No need to upgrade! zlib 1.2.4_1 >= zlib 1.2.4_1
DEBUG: No need to upgrade! hs-zlib 0.5.2.0_0 >= hs-zlib 0.5.2.0_0
DEBUG: No need to upgrade! hs-zip-archive 0.1.1.6_0 >= hs-zip-archive 0.1.1.6_0
DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/hs-utf8-string
DEBUG: epoch: in tree: 0 installed: 0
DEBUG: hs-utf8-string 0.3.6_0 exists in the ports tree
DEBUG: hs-utf8-string 0.3.6_0  is the latest installed
DEBUG: hs-utf8-string 0.3.6_0  is active
DEBUG: Merging existing variants  into variants
DEBUG: new fully merged portvariants: 
DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/hs-utf8-string
DEBUG: OS Platform: darwin
DEBUG: OS Version: 10.3.0
DEBUG: Mac OS X Version: 10.6
DEBUG: System Arch: i386
DEBUG: setting option os.universal_supported to yes
DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/haskell-1.0.tcl
DEBUG: 'universal_variant no' specified, so not adding the default universal variant
DEBUG: Requested variant darwin is not provided by port hs-utf8-string.
DEBUG: Requested variant i386 is not provided by port hs-utf8-string.
DEBUG: Requested variant macosx is not provided by port hs-utf8-string.
DEBUG: No need to upgrade! hs-utf8-string 0.3.6_0 >= hs-utf8-string 0.3.6_0
--->  Computing dependencies for pandoc
DEBUG: Searching for dependency: gmp
DEBUG: Found Dependency: receipt exists for gmp
DEBUG: Searching for dependency: ghc
DEBUG: Found Dependency: receipt exists for ghc
DEBUG: Searching for dependency: hs-haddock
DEBUG: Found Dependency: receipt exists for hs-haddock
DEBUG: Searching for dependency: hs-zip-archive
DEBUG: Found Dependency: receipt exists for hs-zip-archive
DEBUG: Searching for dependency: hs-utf8-string
DEBUG: Found Dependency: receipt exists for hs-utf8-string
DEBUG: Executing org.macports.main (pandoc)
DEBUG: Skipping completed org.macports.fetch (pandoc)
DEBUG: Skipping completed org.macports.checksum (pandoc)
DEBUG: Skipping completed org.macports.extract (pandoc)
DEBUG: Skipping completed org.macports.patch (pandoc)
DEBUG: Skipping completed org.macports.configure (pandoc)
--->  Building pandoc
DEBUG: Executing org.macports.build (pandoc)
DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.6'
DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_textproc_pandoc/work/pandoc-1.2.1" && /usr/bin/make -j1 build-all PREFIX=/opt/local GHC=/opt/local/bin/ghc GHC_PKG=/opt/local/bin/ghc-pkg'
./setup build
Preprocessing library pandoc-1.2.1...
Preprocessing executables for pandoc-1.2.1...
Building pandoc-1.2.1...
[ 7 of 29] Compiling Text.Pandoc.ODT  ( src/Text/Pandoc/ODT.hs, dist/build/Text/Pandoc/ODT.o )
Loading package ghc-prim ... linking ... done.
Loading package integer ... linking ... done.
Loading package base ... linking ... done.
Loading package syb ... linking ... done.
Loading package array-0.2.0.0 ... linking ... done.
Loading package bytestring-0.9.1.4 ... linking ... done.
Loading package containers-0.2.0.1 ... linking ... done.
Loading package binary-0.5.0.2 ... linking ... done.
Loading package digest-0.0.0.8 ... linking ... done.
Loading package filepath-1.1.0.2 ... linking ... done.
Loading package old-locale-1.0.0.1 ... linking ... done.
Loading package old-time-1.0.0.2 ... linking ... done.
Loading package unix-2.3.2.0 ... linking ... done.
Loading package directory-1.0.0.3 ... linking ... done.
Loading package mtl-1.1.0.2 ... linking ... done.
Loading package pretty-1.0.1.0 ... linking ... done.
Loading package utf8-string-0.3.6 ... linking ... done.
Loading package zlib-0.5.2.0 ... linking ... done.
Loading package zip-archive-0.1.1.6 ... linking ... done.
make: *** [build] Error 10
Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_textproc_pandoc/work/pandoc-1.2.1" && /usr/bin/make -j1 build-all PREFIX=/opt/local GHC=/opt/local/bin/ghc GHC_PKG=/opt/local/bin/ghc-pkg " returned error 2
DEBUG: Backtrace: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_textproc_pandoc/work/pandoc-1.2.1" && /usr/bin/make -j1 build-all PREFIX=/opt/local GHC=/opt/local/bin/ghc GHC_PKG=/opt/local/bin/ghc-pkg " returned error 2
    while executing
"command_exec build"
    (procedure "portbuild::build_main" line 9)
    invoked from within
"$procedure $targetname"
Warning: the following items did not execute (for pandoc): org.macports.activate org.macports.build org.macports.destroot org.macports.install
Error: Status 1 encountered during processing.
To report a bug, see <http://guide.macports.org/#project.tickets>

Change History (23)

comment:1 Changed 14 years ago by jmroot (Joshua Root)

Keywords: pandoc removed
Owner: changed from macports-tickets@… to jgm@…

Please remember to cc the maintainer.

comment:2 Changed 14 years ago by Damien.Pollet@…

FYI, for me it's failing a bit earlier:

--->  Building pandoc
DEBUG: Executing org.macports.build (pandoc)
DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.6'
DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_textproc_pandoc/work/pandoc-1.2.1" && /usr/bin/make -j2 build-all PREFIX=/opt/local GHC=/opt/local/bin/ghc GHC_PKG=/opt/local/bin/ghc-pkg'
/opt/local/bin/ghc -package Cabal Setup.hs -o ./setup
make: *** No rule to make target `man/man1/hsmarkdown.1', needed by `build-doc'.  Stop.
make: *** Waiting for unfinished jobs....
ld: warning: -read_only_relocs cannot be used with x86_64
Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_textproc_pandoc/work/pandoc-1.2.1" && /usr/bin/make -j2 build-all PREFIX=/opt/local GHC=/opt/local/bin/ghc GHC_PKG=/opt/local/bin/ghc-pkg " returned error 2
DEBUG: Backtrace: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_textproc_pandoc/work/pandoc-1.2.1" && /usr/bin/make -j2 build-all PREFIX=/opt/local GHC=/opt/local/bin/ghc GHC_PKG=/opt/local/bin/ghc-pkg " returned error 2
    while executing
"command_exec build"
    (procedure "portbuild::build_main" line 9)
    invoked from within
"$procedure $targetname"
Warning: the following items did not execute (for pandoc): org.macports.activate org.macports.build org.macports.destroot org.macports.install
Error: Status 1 encountered during processing.

My config looks similar (macports 1.8.2, on 10.6.3), but one difference I see is that I get make -j2 while it's -j1 in the initial report…

comment:3 Changed 14 years ago by jgm@…

Hi, I'm the upstream developer and the author of the original MacPort for pandoc. I haven't had time to keep the port up to date, and no longer use MacPorts much, so I'd like it if someone else would take over the port. I'd be happy to offer advice as needed. However, I don't want to put time into the pandoc-1.2.1 port, since the latest released version of pandoc is 1.5.1.1. (There are a few additional dependencies that would also need ports made.)

If you don't want to upgrade to 1.5 because of the additional dependencies, you might at least upgrade to 1.2.1.1, which should fix the problem noted in the second comment above. I'm not sure about the problem in the first comment. (Note that 1.5.x no longer depends on template Haskell; this should make it more robust to build.)

comment:4 Changed 14 years ago by Damien.Pollet@…

Yes, I just had a look and it seems the major problem is the build system changed (no more makefile), so just bumping the version number is not enough. I'd have a look, but I'm just a dabbler with Haskell and pandoc, and have other priorities currently…

comment:5 in reply to:  4 ; Changed 14 years ago by jgm@…

Replying to Damien.Pollet@…:

Yes, I just had a look and it seems the major problem is the build system changed (no more makefile), so just bumping the version number is not enough. I'd have a look, but I'm just a dabbler with Haskell and pandoc, and have other priorities currently…

Yes, understood, an upgrade to 1.5.1.1 would be more involved. If you wanted to do this, I could help you out with the build commands. In the mean time you might try an upgrade to 1.2.1.1 -- that should be minimal and would fix the man page problem noted above.

comment:6 in reply to:  5 Changed 14 years ago by jgm@…

Replying to jgm@…:

Replying to Damien.Pollet@…:

Yes, I just had a look and it seems the major problem is the build system changed (no more makefile), so just bumping the version number is not enough. I'd have a look, but I'm just a dabbler with Haskell and pandoc, and have other priorities currently…

pandoc 1.5.1.1 is a straightforward Cabal build - no Makefile. These stanzas from the darcs port should be a good basis, if you just want the port to install the executables. If you want the Haskell library installed too, then you'd need to carry over the 'register' stuff from the original port.

configure {
system "cd ${worksrcpath} && runhaskell Setup configure --ghc --prefix=${prefix}"
}

build {
system "cd ${worksrcpath} && runhaskell Setup build"
}

destroot {
system "cd ${worksrcpath} && runhaskell Setup copy --copy-prefix=${destroot}${prefix}"
}

The only other difficulty for an up-to-date port would be producing ports of the new dependencies (zip-archive, texmath, maybe some others). These are all standard Cabalized libraries, so you could probably just modify something like http://trac.macports.org/browser/trunk/dports/devel/hs-bytestring-lexing/Portfile

comment:7 Changed 14 years ago by antony.stubbs@…

Cc: antony.stubbs@… added

Cc Me!

comment:8 Changed 14 years ago by macports@…

Cc: macports@… added

Cc Me!

comment:9 Changed 14 years ago by arto.bendiken@…

Cc: arto.bendiken@… added

Cc Me!

comment:10 Changed 14 years ago by Oliver.Schrenk@…

Cc: Oliver.Schrenk@… added

Cc Me!

comment:11 Changed 14 years ago by Oliver.Schrenk@…

Cc: Oliver.Schrenk@… removed

Cc Me!

comment:12 Changed 14 years ago by Oliver.Schrenk@…

Cc: Oliver.Schrenk@… added

Cc Me!

comment:13 in reply to:  2 Changed 13 years ago by dave@…

Replying to Damien.Pollet@…:

FYI, for me it's failing a bit earlier:

--->  Building pandoc
DEBUG: Executing org.macports.build (pandoc)
DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.6'
DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_textproc_pandoc/work/pandoc-1.2.1" && /usr/bin/make -j2 build-all PREFIX=/opt/local GHC=/opt/local/bin/ghc GHC_PKG=/opt/local/bin/ghc-pkg'
/opt/local/bin/ghc -package Cabal Setup.hs -o ./setup
make: *** No rule to make target `man/man1/hsmarkdown.1', needed by `build-doc'.  Stop.

My config looks similar (macports 1.8.2, on 10.6.3), but one difference I see is that I get make -j2 while it's -j1 in the initial report…

Yeah, I'm seeing the same thing with all the latest macports, macos, etc.

comment:14 Changed 13 years ago by marklivingstone (Mark Livingstone)

I am having the same problem as the original poster except with MacPorts 1.9.2 and OS X 10.6.5

comment:15 Changed 13 years ago by marklivingstone (Mark Livingstone)

Cc: livingstonemark@… added

Cc Me!

comment:16 Changed 13 years ago by jmroot (Joshua Root)

Cc: jgm@… added
Owner: changed from jgm@… to macports-tickets@…

Set to nomaintainer in r75490.

comment:17 Changed 13 years ago by jmroot (Joshua Root)

Owner: changed from macports-tickets@… to singingwolfboy@…

comment:18 Changed 13 years ago by singingwolfboy@…

I'm the latest maintainer for the pandoc port, and I recently updated it to version 1.8.0.1. If anyone can reproduce this problem, please comment on the ticket. If a reasonable length of time has passed and no one has reproduced this problem on 1.8.0.1, I'm going to assume that the upstream maintainer fixed it somewhere along the way from 1.2.1 to 1.8.0.1, and close this ticket.

comment:19 Changed 13 years ago by fiee (Henning Hraban Ramm)

I’m on OSX 10.5.8, have pandoc 1.8.0.1 and hs-zip-archive 0.1.1.7 installed and can’t upgrade.

I guess the problem is the same as above: Pandoc requires hs-haddock, and that fails to build. The log (i.e. runhaskell) says, ghc-paths would be missing, but I installed hs-ghc-paths manually, and the log says, its receipt was found.

Previously I had similar problems with other haskell ports, I installed some unlisted dependencies manually that were mentioned in the build log (hs-ghc-paths, hs-utf8-strings, hs-binary) and managed to fix hs-mmap (dependency of hs-hashed-storage, but I doesn't seem to need that) after instructions in several tickets. But now I’m stuck...

Haskell ports are a mess... :-(

comment:20 Changed 13 years ago by fiee (Henning Hraban Ramm)

Isn’t this ticket a duplicate of #22387?

comment:21 in reply to:  20 Changed 13 years ago by ryandesign (Ryan Carsten Schmidt)

Replying to hraban@…:

Isn’t this ticket a duplicate of #22387?

comment:2 looks like a duplicate of #22387, yes. But the problem in the description of this ticket looks different.

comment:22 Changed 13 years ago by lincoln@…

Cc: lincoln@… added

Cc Me!

comment:23 Changed 11 years ago by neverpanic (Clemens Lang)

Resolution: fixed
Status: newclosed

I believe pandoc is currently working and this is fixed. Please open a new ticket, if it fails for any of you.

Note: See TracTickets for help on using tickets.