Opened 13 years ago

Closed 13 years ago

Last modified 13 years ago

#27902 closed defect (wontfix)

kdebase4-workspace @4.5.2 Configure error - build failure

Reported by: ratonovitch@… Owned by: nerdling (Jeremy Lavergne)
Priority: Normal Milestone:
Component: ports Version: 1.9.2
Keywords: Cc:
Port: kdebase4-workspace

Description

I am having a couple issues during configure of kdebase4-workspace. I need some help.
Please see the build log below. There appear to be two issues toward the end of the log file:

:info:configure Traceback (most recent call last):
:info:configure   File "/opt/local/share/apps/cmake/modules/FindPyKDE4.py", line 8, in <module>
:info:configure     import PyKDE4.pykdeconfig
:info:configure ImportError: No module named PyKDE4.pykdeconfig

and

:info:configure CMake Error at ksysguard/ksysguardd/CMakeLists.txt:33 (add_subdirectory):
:info:configure   add_subdirectory given source "Darwin" which is not an existing directory.

To remedy the pykde4 dependency, I tried building kdeutils4 @4.3.2, but gave up after finding that was dependent on deprecated kdelibs4-experimental.

OS X 10.6.6
Xcode Version 3.2.2 (1650)

from /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_kde_kdebase4-workspace/main.log:

version:1
:debug:main epoch: in tree: 0 installed: 0
:debug:main cmake 2.8.3_1 exists in the ports tree
:debug:main cmake 2.8.3_1  is the latest installed
:debug:main cmake 2.8.3_1  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/cmake
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! cmake 2.8.3_1 >= cmake 2.8.3_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main libidn 1.19_0 exists in the ports tree
:debug:main libidn 1.19_0  is the latest installed
:debug:main libidn 1.19_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/mail/libidn
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! libidn 1.19_0 >= libidn 1.19_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libiconv 1.13.1_0 exists in the ports tree
:debug:main libiconv 1.13.1_0 +universal is the latest installed
:debug:main libiconv 1.13.1_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main gettext 0.18.1.1_2 exists in the ports tree
:debug:main gettext 0.18.1.1_2 +universal is the latest installed
:debug:main gettext 0.18.1.1_2 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main universal variant already exists, so not adding the default one
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main ncurses 5.7_1 exists in the ports tree
:debug:main ncurses 5.7_1 +universal is the latest installed
:debug:main ncurses 5.7_1 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! ncurses 5.7_1 >= ncurses 5.7_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main ncursesw 5.7_1 exists in the ports tree
:debug:main ncursesw 5.7_1 +universal is the latest installed
:debug:main ncursesw 5.7_1 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! ncursesw 5.7_1 >= ncursesw 5.7_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main expat 2.0.1_1 exists in the ports tree
:debug:main expat 2.0.1_1 +universal is the latest installed
:debug:main expat 2.0.1_1 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1
:debug:main epoch: in tree: 1 installed: 1
:debug:main openssl 1.0.0c_0 exists in the ports tree
:debug:main openssl 1.0.0c_0  is the latest installed
:debug:main openssl 1.0.0c_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! openssl 1.0.0c_0 >= openssl 1.0.0c_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main zlib 1.2.5_0 exists in the ports tree
:debug:main zlib 1.2.5_0  is the latest installed
:debug:main zlib 1.2.5_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main pkgconfig 0.25_1 exists in the ports tree
:debug:main pkgconfig 0.25_1 +universal is the latest installed
:debug:main pkgconfig 0.25_1 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! pkgconfig 0.25_1 >= pkgconfig 0.25_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main automoc 0.9.88_3 exists in the ports tree
:debug:main automoc 0.9.88_3  is the latest installed
:debug:main automoc 0.9.88_3  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automoc
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/kde4-1.1.tcl
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/cmake-1.0.tcl
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/qt4-1.0.tcl
:debug:main Re-registering default for configure.dir
:debug:main Re-registering default for build.dir
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! automoc 0.9.88_3 >= automoc 0.9.88_3
:debug:main epoch: in tree: 0 installed: 0
:debug:main qt4-mac 4.7.1_0 exists in the ports tree
:debug:main qt4-mac 4.7.1_0 +quartz is the latest installed
:debug:main qt4-mac 4.7.1_0 +quartz is active
:debug:main Merging existing variants '+quartz' into variants
:debug:main new fully merged portvariants: quartz +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/aqua/qt4-mac
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/qt4-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main Executing variant quartz provides quartz
:debug:main No need to upgrade! qt4-mac 4.7.1_0 >= qt4-mac 4.7.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main dbus 1.2.24_1 exists in the ports tree
:debug:main dbus 1.4.0_1  is the latest installed
:debug:main dbus 1.4.0_1  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/dbus
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! dbus 1.4.0_1 >= dbus 1.2.24_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main sqlite3 3.7.3_0 exists in the ports tree
:debug:main sqlite3 3.7.3_0  is the latest installed
:debug:main sqlite3 3.7.3_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! sqlite3 3.7.3_0 >= sqlite3 3.7.3_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main readline 6.1.002_0 exists in the ports tree
:debug:main readline 6.1.002_0 +universal is the latest installed
:debug:main readline 6.1.002_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! readline 6.1.002_0 >= readline 6.1.002_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main tiff 3.9.4_0 exists in the ports tree
:debug:main tiff 3.9.4_0  is the latest installed
:debug:main tiff 3.9.4_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! tiff 3.9.4_0 >= tiff 3.9.4_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main jpeg 8b_0 exists in the ports tree
:debug:main jpeg 8b_0  is the latest installed
:debug:main jpeg 8b_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! jpeg 8b_0 >= jpeg 8b_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libpng 1.2.44_0 exists in the ports tree
:debug:main libpng 1.2.44_0  is the latest installed
:debug:main libpng 1.2.44_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! libpng 1.2.44_0 >= libpng 1.2.44_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libmng 1.0.10_2 exists in the ports tree
:debug:main libmng 1.0.10_2  is the latest installed
:debug:main libmng 1.0.10_2  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libmng
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! libmng 1.0.10_2 >= libmng 1.0.10_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main lcms 1.19_2 exists in the ports tree
:debug:main lcms 1.19_2  is the latest installed
:debug:main lcms 1.19_2  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/lcms
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! lcms 1.19_2 >= lcms 1.19_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main phonon 4.4.2_3 exists in the ports tree
:debug:main phonon 4.4.2_3  is the latest installed
:debug:main phonon 4.4.2_3  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/phonon
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/qt4-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! phonon 4.4.2_3 >= phonon 4.4.2_3
:debug:main epoch: in tree: 0 installed: 0
:debug:main glib2 2.26.1_0 exists in the ports tree
:debug:main glib2 2.26.1_0  is the latest installed
:debug:main glib2 2.26.1_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/glib2
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! glib2 2.26.1_0 >= glib2 2.26.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main perl5 5.8.9_0 exists in the ports tree
:debug:main perl5 5.8.9_0  is the latest installed
:debug:main perl5 5.8.9_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main universal_variant is false, so not adding the default universal variant
:debug:main No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main perl5.8 5.8.9_3 exists in the ports tree
:debug:main perl5.8 5.8.9_3 +universal is the latest installed
:debug:main perl5.8 5.8.9_3 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3
:debug:main epoch: in tree: 0 installed: 0
:debug:main python_select 0.3_0 exists in the ports tree
:debug:main python_select 0.3_0  is the latest installed
:debug:main python_select 0.3_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/python_select
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
:debug:main only one arch supported, so not adding the default universal variant
:debug:main No need to upgrade! python_select 0.3_0 >= python_select 0.3_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main kdebase4-runtime 4.5.4_0 exists in the ports tree
:debug:main kdebase4-runtime 4.5.4_0  is the latest installed
:debug:main kdebase4-runtime 4.5.4_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/kdebase4-runtime
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/kde4-1.1.tcl
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/cmake-1.0.tcl
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/qt4-1.0.tcl
:debug:main Re-registering default for configure.dir
:debug:main Re-registering default for build.dir
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! kdebase4-runtime 4.5.4_0 >= kdebase4-runtime 4.5.4_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main kdelibs4 4.5.4_0 exists in the ports tree
:debug:main kdelibs4 4.5.4_0  is the latest installed
:debug:main kdelibs4 4.5.4_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/kdelibs4
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/kde4-1.1.tcl
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/cmake-1.0.tcl
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/qt4-1.0.tcl
:debug:main Re-registering default for configure.dir
:debug:main Re-registering default for build.dir
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! kdelibs4 4.5.4_0 >= kdelibs4 4.5.4_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main bzip2 1.0.6_0 exists in the ports tree
:debug:main bzip2 1.0.6_0  is the latest installed
:debug:main bzip2 1.0.6_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main soprano 2.5.63_0 exists in the ports tree
:debug:main soprano 2.5.63_0  is the latest installed
:debug:main soprano 2.5.63_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/soprano
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/kde4-1.1.tcl
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/cmake-1.0.tcl
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/qt4-1.0.tcl
:debug:main Re-registering default for configure.dir
:debug:main Re-registering default for build.dir
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! soprano 2.5.63_0 >= soprano 2.5.63_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main clucene 0.9.21b_0 exists in the ports tree
:debug:main clucene 0.9.21b_0  is the latest installed
:debug:main clucene 0.9.21b_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/clucene
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! clucene 0.9.21b_0 >= clucene 0.9.21b_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main strigi 0.6.4_0 exists in the ports tree
:debug:main strigi 0.6.4_0  is the latest installed
:debug:main strigi 0.6.4_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/strigi
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/cmake-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! strigi 0.6.4_0 >= strigi 0.6.4_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libxml2 2.7.8_0 exists in the ports tree
:debug:main libxml2 2.7.8_0  is the latest installed
:debug:main libxml2 2.7.8_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! libxml2 2.7.8_0 >= libxml2 2.7.8_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main redland 1.0.12_0 exists in the ports tree
:debug:main redland 1.0.12_0 +db46 is the latest installed
:debug:main redland 1.0.12_0 +db46 is active
:debug:main Merging existing variants '+db46' into variants
:debug:main new fully merged portvariants: db46 +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/www/redland
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main adding the default universal variant
:debug:main Executing variant db46 provides db46
:debug:main No need to upgrade! redland 1.0.12_0 >= redland 1.0.12_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main curl 7.21.2_2 exists in the ports tree
:debug:main curl 7.21.2_2 +ssl is the latest installed
:debug:main curl 7.21.2_2 +ssl is active
:debug:main Merging existing variants '+ssl' into variants
:debug:main new fully merged portvariants: ssl +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main universal variant already exists, so not adding the default one
:debug:main Executing variant ssl provides ssl
:debug:main No need to upgrade! curl 7.21.2_2 >= curl 7.21.2_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main curl-ca-bundle 7.21.2_4 exists in the ports tree
:debug:main curl-ca-bundle 7.21.2_4  is the latest installed
:debug:main curl-ca-bundle 7.21.2_4  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl-ca-bundle
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main universal_variant is false, so not adding the default universal variant
:debug:main No need to upgrade! curl-ca-bundle 7.21.2_4 >= curl-ca-bundle 7.21.2_4
:debug:main epoch: in tree: 0 installed: 0
:debug:main libxslt 1.1.26_0 exists in the ports tree
:debug:main libxslt 1.1.26_0  is the latest installed
:debug:main libxslt 1.1.26_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxslt
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! libxslt 1.1.26_0 >= libxslt 1.1.26_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main raptor 1.4.21_1 exists in the ports tree
:debug:main raptor 1.4.21_1  is the latest installed
:debug:main raptor 1.4.21_1  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/www/raptor
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! raptor 1.4.21_1 >= raptor 1.4.21_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main rasqal 0.9.21_0 exists in the ports tree
:debug:main rasqal 0.9.21_0  is the latest installed
:debug:main rasqal 0.9.21_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/www/rasqal
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! rasqal 0.9.21_0 >= rasqal 0.9.21_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main mpfr 3.0.0-p8_0 exists in the ports tree
:debug:main mpfr 3.0.0-p8_0  is the latest installed
:debug:main mpfr 3.0.0-p8_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/mpfr
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! mpfr 3.0.0-p8_0 >= mpfr 3.0.0-p8_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main gmp 5.0.1_0 exists in the ports tree
:debug:main gmp 5.0.1_0  is the latest installed
:debug:main gmp 5.0.1_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmp
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! gmp 5.0.1_0 >= gmp 5.0.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main db46 4.6.21_6 exists in the ports tree
:debug:main db46 4.6.21_6  is the latest installed
:debug:main db46 4.6.21_6  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6
:debug:main epoch: in tree: 0 installed: 0
:debug:main libiodbc 3.52.7_0 exists in the ports tree
:debug:main libiodbc 3.52.7_0  is the latest installed
:debug:main libiodbc 3.52.7_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libiodbc
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! libiodbc 3.52.7_0 >= libiodbc 3.52.7_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main virtuoso 6.1.2_1 exists in the ports tree
:debug:main virtuoso 6.1.2_1  is the latest installed
:debug:main virtuoso 6.1.2_1  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/virtuoso
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! virtuoso 6.1.2_1 >= virtuoso 6.1.2_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main cyrus-sasl2 2.1.23_3 exists in the ports tree
:debug:main cyrus-sasl2 2.1.23_3 +kerberos is the latest installed
:debug:main cyrus-sasl2 2.1.23_3 +kerberos is active
:debug:main Merging existing variants '+kerberos' into variants
:debug:main new fully merged portvariants: kerberos +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/security/cyrus-sasl2
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main Executing variant kerberos provides kerberos
:debug:main No need to upgrade! cyrus-sasl2 2.1.23_3 >= cyrus-sasl2 2.1.23_3
:debug:main epoch: in tree: 0 installed: 0
:debug:main pcre 8.10_0 exists in the ports tree
:debug:main pcre 8.10_0  is the latest installed
:debug:main pcre 8.10_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pcre
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! pcre 8.10_0 >= pcre 8.10_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main shared-mime-info 0.90_0 exists in the ports tree
:debug:main shared-mime-info 0.90_0  is the latest installed
:debug:main shared-mime-info 0.90_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/shared-mime-info
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! shared-mime-info 0.90_0 >= shared-mime-info 0.90_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main giflib 4.1.6_1 exists in the ports tree
:debug:main giflib 4.1.6_1  is the latest installed
:debug:main giflib 4.1.6_1  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/giflib
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! giflib 4.1.6_1 >= giflib 4.1.6_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libsm 1.2.0_0 exists in the ports tree
:debug:main xorg-libsm 1.2.0_0  is the latest installed
:debug:main xorg-libsm 1.2.0_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libsm
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xorg-libsm 1.2.0_0 >= xorg-libsm 1.2.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libice 1.0.7_0 exists in the ports tree
:debug:main xorg-libice 1.0.7_0  is the latest installed
:debug:main xorg-libice 1.0.7_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libice
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xorg-libice 1.0.7_0 >= xorg-libice 1.0.7_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-xproto 7.0.20_0 exists in the ports tree
:debug:main xorg-xproto 7.0.20_0  is the latest installed
:debug:main xorg-xproto 7.0.20_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal variant
:debug:main No need to upgrade! xorg-xproto 7.0.20_0 >= xorg-xproto 7.0.20_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libX11 1.4.0_1 exists in the ports tree
:debug:main xorg-libX11 1.4.0_1  is the latest installed
:debug:main xorg-libX11 1.4.0_1  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xorg-libX11 1.4.0_1 >= xorg-libX11 1.4.0_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libXdmcp 1.1.0_0 exists in the ports tree
:debug:main xorg-libXdmcp 1.1.0_0  is the latest installed
:debug:main xorg-libXdmcp 1.1.0_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xorg-libXdmcp 1.1.0_0 >= xorg-libXdmcp 1.1.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libXau 1.0.6_0 exists in the ports tree
:debug:main xorg-libXau 1.0.6_0  is the latest installed
:debug:main xorg-libXau 1.0.6_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xorg-libXau 1.0.6_0 >= xorg-libXau 1.0.6_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libxcb 1.7_0 exists in the ports tree
:debug:main xorg-libxcb 1.7_0 +python26 is the latest installed
:debug:main xorg-libxcb 1.7_0 +python26 is active
:debug:main Merging existing variants '+python26' into variants
:debug:main new fully merged portvariants: python26 +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libxcb
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant python26 provides python26
:debug:main No need to upgrade! xorg-libxcb 1.7_0 >= xorg-libxcb 1.7_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-xcb-proto 1.6_0 exists in the ports tree
:debug:main xorg-xcb-proto 1.6_0 +python26 is the latest installed
:debug:main xorg-xcb-proto 1.6_0 +python26 is active
:debug:main Merging existing variants '+python26' into variants
:debug:main new fully merged portvariants: python26 +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcb-proto
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal variant
:debug:main Executing variant python26 provides python26
:debug:main No need to upgrade! xorg-xcb-proto 1.6_0 >= xorg-xcb-proto 1.6_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main python26 2.6.6_1 exists in the ports tree
:debug:main python26 2.6.6_1  is the latest installed
:debug:main python26 2.6.6_1  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python26
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! python26 2.6.6_1 >= python26 2.6.6_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main gdbm 1.8.3_3 exists in the ports tree
:debug:main gdbm 1.8.3_3  is the latest installed
:debug:main gdbm 1.8.3_3  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! gdbm 1.8.3_3 >= gdbm 1.8.3_3
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libpthread-stubs 0.3_0 exists in the ports tree
:debug:main xorg-libpthread-stubs 0.3_0  is the latest installed
:debug:main xorg-libpthread-stubs 0.3_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libpthread-stubs
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal variant
:debug:main No need to upgrade! xorg-libpthread-stubs 0.3_0 >= xorg-libpthread-stubs 0.3_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-kbproto 1.0.5_0 exists in the ports tree
:debug:main xorg-kbproto 1.0.5_0  is the latest installed
:debug:main xorg-kbproto 1.0.5_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal variant
:debug:main No need to upgrade! xorg-kbproto 1.0.5_0 >= xorg-kbproto 1.0.5_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main jasper 1.900.1_7 exists in the ports tree
:debug:main jasper 1.900.1_7  is the latest installed
:debug:main jasper 1.900.1_7  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jasper
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! jasper 1.900.1_7 >= jasper 1.900.1_7
:debug:main epoch: in tree: 0 installed: 0
:debug:main openexr 1.6.1_1 exists in the ports tree
:debug:main openexr 1.6.1_1  is the latest installed
:debug:main openexr 1.6.1_1  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/openexr
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! openexr 1.6.1_1 >= openexr 1.6.1_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main ilmbase 1.0.1_2 exists in the ports tree
:debug:main ilmbase 1.0.1_2  is the latest installed
:debug:main ilmbase 1.0.1_2  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/ilmbase
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! ilmbase 1.0.1_2 >= ilmbase 1.0.1_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main libart_lgpl 2.3.21_0 exists in the ports tree
:debug:main libart_lgpl 2.3.21_0  is the latest installed
:debug:main libart_lgpl 2.3.21_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libart_lgpl
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! libart_lgpl 2.3.21_0 >= libart_lgpl 2.3.21_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main enchant 1.6.0_0 exists in the ports tree
:debug:main enchant 1.6.0_0  is the latest installed
:debug:main enchant 1.6.0_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/enchant
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! enchant 1.6.0_0 >= enchant 1.6.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main aspell 0.60.6_4 exists in the ports tree
:debug:main aspell 0.60.6_4 +nonls is the latest installed
:debug:main aspell 0.60.6_4 +nonls is active
:debug:main Merging existing variants '+nonls' into variants
:debug:main new fully merged portvariants: nonls +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/aspell
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main adding the default universal variant
:debug:main Executing variant nonls provides nonls
:debug:main No need to upgrade! aspell 0.60.6_4 >= aspell 0.60.6_4
:debug:main epoch: in tree: 0 installed: 0
:debug:main texinfo 4.13_2 exists in the ports tree
:debug:main texinfo 4.13_2 +universal is the latest installed
:debug:main texinfo 4.13_2 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/texinfo
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! texinfo 4.13_2 >= texinfo 4.13_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main hunspell 1.2.12_0 exists in the ports tree
:debug:main hunspell 1.2.12_0  is the latest installed
:debug:main hunspell 1.2.12_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/hunspell
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! hunspell 1.2.12_0 >= hunspell 1.2.12_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main aspell-dict-en 6.0_0 exists in the ports tree
:debug:main aspell-dict-en 6.0_0  is the latest installed
:debug:main aspell-dict-en 6.0_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/aspell-dict-en
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main universal_variant is false, so not adding the default universal variant
:debug:main No need to upgrade! aspell-dict-en 6.0_0 >= aspell-dict-en 6.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main attica 0.2.0_1 exists in the ports tree
:debug:main attica 0.2.0_1  is the latest installed
:debug:main attica 0.2.0_1  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/attica
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/kde4-1.1.tcl
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/cmake-1.0.tcl
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/qt4-1.0.tcl
:debug:main Re-registering default for configure.dir
:debug:main Re-registering default for build.dir
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! attica 0.2.0_1 >= attica 0.2.0_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main liblzma 5.0.0_0 exists in the ports tree
:debug:main liblzma 5.0.0_0  is the latest installed
:debug:main liblzma 5.0.0_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/liblzma
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! liblzma 5.0.0_0 >= liblzma 5.0.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main avahi 0.6.28_2 exists in the ports tree
:debug:main avahi 0.6.28_2  is the latest installed
:debug:main avahi 0.6.28_2  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/avahi
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! avahi 0.6.28_2 >= avahi 0.6.28_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main libdaemon 0.14_0 exists in the ports tree
:debug:main libdaemon 0.14_0  is the latest installed
:debug:main libdaemon 0.14_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libdaemon
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! libdaemon 0.14_0 >= libdaemon 0.14_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libglade2 2.6.4_1 exists in the ports tree
:debug:main libglade2 2.6.4_1  is the latest installed
:debug:main libglade2 2.6.4_1  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/libglade2
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! libglade2 2.6.4_1 >= libglade2 2.6.4_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main fontconfig 2.8.0_0 exists in the ports tree
:debug:main fontconfig 2.8.0_0 +macosx is the latest installed
:debug:main fontconfig 2.8.0_0 +macosx is active
:debug:main Merging existing variants '+macosx' into variants
:debug:main new fully merged portvariants: macosx +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main universal variant already exists, so not adding the default one
:debug:main Requested variant macosx is not provided by port fontconfig.
:debug:main Skipping upgrade since fontconfig 2.8.0_0 >= fontconfig 2.8.0_0, even though installed variants "+macosx" do not match "".
:debug:main epoch: in tree: 0 installed: 0
:debug:main freetype 2.4.4_0 exists in the ports tree
:debug:main freetype 2.4.4_0  is the latest installed
:debug:main freetype 2.4.4_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! freetype 2.4.4_0 >= freetype 2.4.4_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main gtk2 2.22.1_0 exists in the ports tree
:debug:main gtk2 2.22.1_0 +x11 is the latest installed
:debug:main gtk2 2.22.1_0 +x11 is active
:debug:main Merging existing variants '+x11' into variants
:debug:main new fully merged portvariants: x11 +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/gtk2
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
:debug:main universal variant already exists, so not adding the default one
:debug:main Executing variant x11 provides x11
:debug:main No need to upgrade! gtk2 2.22.1_0 >= gtk2 2.22.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main atk 1.30.0_0 exists in the ports tree
:debug:main atk 1.30.0_0  is the latest installed
:debug:main atk 1.30.0_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/atk
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! atk 1.30.0_0 >= atk 1.30.0_0
:debug:main epoch: in tree: 1 installed: 1
:debug:main pango 1.28.3_0 exists in the ports tree
:debug:main pango 1.28.3_0  is the latest installed
:debug:main pango 1.28.3_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/pango
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main adding the default universal variant
:debug:main No need to upgrade! pango 1.28.3_0 >= pango 1.28.3_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main Xft2 2.2.0_0 exists in the ports tree
:debug:main Xft2 2.2.0_0  is the latest installed
:debug:main Xft2 2.2.0_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! Xft2 2.2.0_0 >= Xft2 2.2.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xrender 0.9.6_0 exists in the ports tree
:debug:main xrender 0.9.6_0  is the latest installed
:debug:main xrender 0.9.6_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xrender 0.9.6_0 >= xrender 0.9.6_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-renderproto 0.11.1_0 exists in the ports tree
:debug:main xorg-renderproto 0.11.1_0  is the latest installed
:debug:main xorg-renderproto 0.11.1_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-renderproto
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal variant
:debug:main No need to upgrade! xorg-renderproto 0.11.1_0 >= xorg-renderproto 0.11.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main cairo 1.10.2_0 exists in the ports tree
:debug:main cairo 1.10.2_0 +x11_xcb is the latest installed
:debug:main cairo 1.10.2_0 +x11_xcb is active
:debug:main Merging existing variants '+x11_xcb' into variants
:debug:main new fully merged portvariants: x11_xcb +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/cairo
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
:debug:main universal variant already exists, so not adding the default one
:debug:main Executing variant x11_xcb provides x11_xcb
:debug:main No need to upgrade! cairo 1.10.2_0 >= cairo 1.10.2_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libpixman 0.20.0_0 exists in the ports tree
:debug:main libpixman 0.20.0_0  is the latest installed
:debug:main libpixman 0.20.0_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpixman
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! libpixman 0.20.0_0 >= libpixman 0.20.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-xcb-util 0.3.6_0 exists in the ports tree
:debug:main xorg-xcb-util 0.3.6_0  is the latest installed
:debug:main xorg-xcb-util 0.3.6_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcb-util
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xorg-xcb-util 0.3.6_0 >= xorg-xcb-util 0.3.6_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main gdk-pixbuf2 2.22.1_0 exists in the ports tree
:debug:main gdk-pixbuf2 2.22.1_0  is the latest installed
:debug:main gdk-pixbuf2 2.22.1_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/gdk-pixbuf2
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! gdk-pixbuf2 2.22.1_0 >= gdk-pixbuf2 2.22.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libXi 1.4.0_0 exists in the ports tree
:debug:main xorg-libXi 1.4.0_0  is the latest installed
:debug:main xorg-libXi 1.4.0_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXi
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xorg-libXi 1.4.0_0 >= xorg-libXi 1.4.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libXext 1.2.0_0 exists in the ports tree
:debug:main xorg-libXext 1.2.0_0  is the latest installed
:debug:main xorg-libXext 1.2.0_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXext
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xorg-libXext 1.2.0_0 >= xorg-libXext 1.2.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-xextproto 7.1.2_0 exists in the ports tree
:debug:main xorg-xextproto 7.1.2_0  is the latest installed
:debug:main xorg-xextproto 7.1.2_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal variant
:debug:main No need to upgrade! xorg-xextproto 7.1.2_0 >= xorg-xextproto 7.1.2_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-inputproto 2.0.1_0 exists in the ports tree
:debug:main xorg-inputproto 2.0.1_0  is the latest installed
:debug:main xorg-inputproto 2.0.1_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-inputproto
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal variant
:debug:main No need to upgrade! xorg-inputproto 2.0.1_0 >= xorg-inputproto 2.0.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libXrandr 1.3.1_0 exists in the ports tree
:debug:main xorg-libXrandr 1.3.1_0  is the latest installed
:debug:main xorg-libXrandr 1.3.1_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXrandr
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xorg-libXrandr 1.3.1_0 >= xorg-libXrandr 1.3.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-randrproto 1.3.2_0 exists in the ports tree
:debug:main xorg-randrproto 1.3.2_0  is the latest installed
:debug:main xorg-randrproto 1.3.2_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-randrproto
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal variant
:debug:main No need to upgrade! xorg-randrproto 1.3.2_0 >= xorg-randrproto 1.3.2_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libXcursor 1.1.11_0 exists in the ports tree
:debug:main xorg-libXcursor 1.1.11_0  is the latest installed
:debug:main xorg-libXcursor 1.1.11_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXcursor
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xorg-libXcursor 1.1.11_0 >= xorg-libXcursor 1.1.11_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libXfixes 4.0.5_0 exists in the ports tree
:debug:main xorg-libXfixes 4.0.5_0  is the latest installed
:debug:main xorg-libXfixes 4.0.5_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXfixes
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xorg-libXfixes 4.0.5_0 >= xorg-libXfixes 4.0.5_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-fixesproto 4.1.2_0 exists in the ports tree
:debug:main xorg-fixesproto 4.1.2_0  is the latest installed
:debug:main xorg-fixesproto 4.1.2_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-fixesproto
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal variant
:debug:main No need to upgrade! xorg-fixesproto 4.1.2_0 >= xorg-fixesproto 4.1.2_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libXinerama 1.1.1_0 exists in the ports tree
:debug:main xorg-libXinerama 1.1.1_0  is the latest installed
:debug:main xorg-libXinerama 1.1.1_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXinerama
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xorg-libXinerama 1.1.1_0 >= xorg-libXinerama 1.1.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-xineramaproto 1.2_0 exists in the ports tree
:debug:main xorg-xineramaproto 1.2_0  is the latest installed
:debug:main xorg-xineramaproto 1.2_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xineramaproto
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal variant
:debug:main No need to upgrade! xorg-xineramaproto 1.2_0 >= xorg-xineramaproto 1.2_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libXdamage 1.1.3_0 exists in the ports tree
:debug:main xorg-libXdamage 1.1.3_0  is the latest installed
:debug:main xorg-libXdamage 1.1.3_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdamage
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xorg-libXdamage 1.1.3_0 >= xorg-libXdamage 1.1.3_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-damageproto 1.2.1_0 exists in the ports tree
:debug:main xorg-damageproto 1.2.1_0  is the latest installed
:debug:main xorg-damageproto 1.2.1_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-damageproto
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal variant
:debug:main No need to upgrade! xorg-damageproto 1.2.1_0 >= xorg-damageproto 1.2.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libXcomposite 0.4.3_0 exists in the ports tree
:debug:main xorg-libXcomposite 0.4.3_0  is the latest installed
:debug:main xorg-libXcomposite 0.4.3_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXcomposite
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xorg-libXcomposite 0.4.3_0 >= xorg-libXcomposite 0.4.3_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-compositeproto 0.4.2_0 exists in the ports tree
:debug:main xorg-compositeproto 0.4.2_0  is the latest installed
:debug:main xorg-compositeproto 0.4.2_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-compositeproto
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal variant
:debug:main No need to upgrade! xorg-compositeproto 0.4.2_0 >= xorg-compositeproto 0.4.2_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main dbus-python26 0.83.2_0 exists in the ports tree
:debug:main dbus-python26 0.83.2_0  is the latest installed
:debug:main dbus-python26 0.83.2_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/dbus-python26
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! dbus-python26 0.83.2_0 >= dbus-python26 0.83.2_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main dbus-glib 0.92_0 exists in the ports tree
:debug:main dbus-glib 0.92_0  is the latest installed
:debug:main dbus-glib 0.92_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/dbus-glib
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! dbus-glib 0.92_0 >= dbus-glib 0.92_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main py26-gobject 2.26.0_1 exists in the ports tree
:debug:main py26-gobject 2.26.0_1  is the latest installed
:debug:main py26-gobject 2.26.0_1  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-gobject
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! py26-gobject 2.26.0_1 >= py26-gobject 2.26.0_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main libffi 3.0.9_0 exists in the ports tree
:debug:main libffi 3.0.9_0  is the latest installed
:debug:main libffi 3.0.9_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libffi
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! libffi 3.0.9_0 >= libffi 3.0.9_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main py26-gtk 2.22.0_0 exists in the ports tree
:debug:main py26-gtk 2.22.0_0  is the latest installed
:debug:main py26-gtk 2.22.0_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-gtk
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! py26-gtk 2.22.0_0 >= py26-gtk 2.22.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main py26-cairo 1.8.10_0 exists in the ports tree
:debug:main py26-cairo 1.8.10_0  is the latest installed
:debug:main py26-cairo 1.8.10_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-cairo
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! py26-cairo 1.8.10_0 >= py26-cairo 1.8.10_0
:debug:main epoch: in tree: 20100319 installed: 20100319
:debug:main py26-numpy 1.5.1_1 exists in the ports tree
:debug:main py26-numpy 1.5.1_1 +atlas+gcc44 is the latest installed
:debug:main py26-numpy 1.5.1_1 +atlas+gcc44 is active
:debug:main Merging existing variants '+atlas+gcc44' into variants
:debug:main new fully merged portvariants: gcc44 + atlas +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-numpy
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl
:debug:main universal_variant is false, so not adding the default universal variant
:debug:main Executing variant atlas provides atlas
:debug:main Executing variant gcc44 provides gcc44
:debug:main No need to upgrade! py26-numpy 1.5.1_1 >= py26-numpy 1.5.1_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main fftw-3 3.2.2_0 exists in the ports tree
:debug:main fftw-3 3.2.2_0 +i386 is the latest installed
:debug:main fftw-3 3.2.2_0 +i386 is active
:debug:main Merging existing variants '+i386' into variants
:debug:main new fully merged portvariants: i386 +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/math/fftw-3
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main Requested variant i386 is not provided by port fftw-3.
:debug:main Skipping upgrade since fftw-3 3.2.2_0 >= fftw-3 3.2.2_0, even though installed variants "+i386" do not match "".
:debug:main epoch: in tree: 0 installed: 0
:debug:main py26-nose 0.11.3_0 exists in the ports tree
:debug:main py26-nose 0.11.3_0  is the latest installed
:debug:main py26-nose 0.11.3_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-nose
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl
:debug:main only one arch supported, so not adding the default universal variant
:debug:main No need to upgrade! py26-nose 0.11.3_0 >= py26-nose 0.11.3_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main py26-distribute 0.6.14_0 exists in the ports tree
:debug:main py26-distribute 0.6.14_0  is the latest installed
:debug:main py26-distribute 0.6.14_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py26-distribute
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python26-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! py26-distribute 0.6.14_0 >= py26-distribute 0.6.14_0
:debug:main epoch: in tree: 1 installed: 1
:debug:main gcc44 4.4.5_0 exists in the ports tree
:debug:main gcc44 4.4.5_0  is the latest installed
:debug:main gcc44 4.4.5_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/gcc44
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! gcc44 4.4.5_0 >= gcc44 4.4.5_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main atlas 3.8.3_4 exists in the ports tree
:debug:main atlas 3.8.3_4 +gcc44 is the latest installed
:debug:main atlas 3.8.3_4 +gcc44 is active
:debug:main Merging existing variants '+gcc44' into variants
:debug:main new fully merged portvariants: gcc44 +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/math/atlas
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main Executing variant gcc44 provides gcc44
:debug:main No need to upgrade! atlas 3.8.3_4 >= atlas 3.8.3_4
:debug:main epoch: in tree: 0 installed: 0
:debug:main gzip 1.4_0 exists in the ports tree
:debug:main gzip 1.4_0 +universal is the latest installed
:debug:main gzip 1.4_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/gzip
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! gzip 1.4_0 >= gzip 1.4_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main intltool 0.40.6_0 exists in the ports tree
:debug:main intltool 0.40.6_0  is the latest installed
:debug:main intltool 0.40.6_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/intltool
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal variant
:debug:main No need to upgrade! intltool 0.40.6_0 >= intltool 0.40.6_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main p5-xml-parser 2.40_0 exists in the ports tree
:debug:main p5-xml-parser 2.40_0  is the latest installed
:debug:main p5-xml-parser 2.40_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-xml-parser
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
:debug:main Re-registering default for configure.universal_args
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! p5-xml-parser 2.40_0 >= p5-xml-parser 2.40_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main p5-getopt-long 2.38_0 exists in the ports tree
:debug:main p5-getopt-long 2.38_0  is the latest installed
:debug:main p5-getopt-long 2.38_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-getopt-long
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
:debug:main Re-registering default for configure.universal_args
:debug:main only one arch supported, so not adding the default universal variant
:debug:main No need to upgrade! p5-getopt-long 2.38_0 >= p5-getopt-long 2.38_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main p5-pathtools 3.33_0 exists in the ports tree
:debug:main p5-pathtools 3.33_0  is the latest installed
:debug:main p5-pathtools 3.33_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-pathtools
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
:debug:main Re-registering default for configure.universal_args
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! p5-pathtools 3.33_0 >= p5-pathtools 3.33_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main p5-scalar-list-utils 1.23_0 exists in the ports tree
:debug:main p5-scalar-list-utils 1.23_0  is the latest installed
:debug:main p5-scalar-list-utils 1.23_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-scalar-list-utils
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
:debug:main Re-registering default for configure.universal_args
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! p5-scalar-list-utils 1.23_0 >= p5-scalar-list-utils 1.23_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main qca 2.0.2_6 exists in the ports tree
:debug:main qca 2.0.2_6  is the latest installed
:debug:main qca 2.0.2_6  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/qca
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/qt4-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! qca 2.0.2_6 >= qca 2.0.2_6
:debug:main epoch: in tree: 0 installed: 0
:debug:main dbusmenu-qt 0.6.2_2 exists in the ports tree
:debug:main dbusmenu-qt 0.6.2_2  is the latest installed
:debug:main dbusmenu-qt 0.6.2_2  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/dbusmenu-qt
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/kde4-1.1.tcl
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/cmake-1.0.tcl
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/qt4-1.0.tcl
:debug:main Re-registering default for configure.dir
:debug:main Re-registering default for build.dir
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! dbusmenu-qt 0.6.2_2 >= dbusmenu-qt 0.6.2_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main qjson 0.7.1_1 exists in the ports tree
:debug:main qjson 0.7.1_1  is the latest installed
:debug:main qjson 0.7.1_1  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/qjson
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/kde4-1.1.tcl
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/cmake-1.0.tcl
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/qt4-1.0.tcl
:debug:main Re-registering default for configure.dir
:debug:main Re-registering default for build.dir
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! qjson 0.7.1_1 >= qjson 0.7.1_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main docbook-xml 5.0_0 exists in the ports tree
:debug:main docbook-xml 5.0_0  is the latest installed
:debug:main docbook-xml 5.0_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main universal_variant is false, so not adding the default universal variant
:debug:main No need to upgrade! docbook-xml 5.0_0 >= docbook-xml 5.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main docbook-xml-4.1.2 4.1.2_1 exists in the ports tree
:debug:main docbook-xml-4.1.2 4.1.2_1  is the latest installed
:debug:main docbook-xml-4.1.2 4.1.2_1  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.1.2
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main universal_variant is false, so not adding the default universal variant
:debug:main No need to upgrade! docbook-xml-4.1.2 4.1.2_1 >= docbook-xml-4.1.2 4.1.2_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main xmlcatmgr 2.2_1 exists in the ports tree
:debug:main xmlcatmgr 2.2_1  is the latest installed
:debug:main xmlcatmgr 2.2_1  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/xmlcatmgr
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xmlcatmgr 2.2_1 >= xmlcatmgr 2.2_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main docbook-xml-4.2 4.2_0 exists in the ports tree
:debug:main docbook-xml-4.2 4.2_0  is the latest installed
:debug:main docbook-xml-4.2 4.2_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.2
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main universal_variant is false, so not adding the default universal variant
:debug:main No need to upgrade! docbook-xml-4.2 4.2_0 >= docbook-xml-4.2 4.2_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main docbook-xml-4.3 4.3_0 exists in the ports tree
:debug:main docbook-xml-4.3 4.3_0  is the latest installed
:debug:main docbook-xml-4.3 4.3_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.3
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main universal_variant is false, so not adding the default universal variant
:debug:main No need to upgrade! docbook-xml-4.3 4.3_0 >= docbook-xml-4.3 4.3_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main docbook-xml-4.4 4.4_0 exists in the ports tree
:debug:main docbook-xml-4.4 4.4_0  is the latest installed
:debug:main docbook-xml-4.4 4.4_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.4
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main universal_variant is false, so not adding the default universal variant
:debug:main No need to upgrade! docbook-xml-4.4 4.4_0 >= docbook-xml-4.4 4.4_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main docbook-xml-4.5 4.5_0 exists in the ports tree
:debug:main docbook-xml-4.5 4.5_0  is the latest installed
:debug:main docbook-xml-4.5 4.5_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.5
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main universal_variant is false, so not adding the default universal variant
:debug:main No need to upgrade! docbook-xml-4.5 4.5_0 >= docbook-xml-4.5 4.5_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main docbook-xml-5.0 5.0_0 exists in the ports tree
:debug:main docbook-xml-5.0 5.0_0  is the latest installed
:debug:main docbook-xml-5.0 5.0_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-5.0
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main universal_variant is false, so not adding the default universal variant
:debug:main No need to upgrade! docbook-xml-5.0 5.0_0 >= docbook-xml-5.0 5.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main docbook-xsl 1.76.1_0 exists in the ports tree
:debug:main docbook-xsl 1.76.1_0  is the latest installed
:debug:main docbook-xsl 1.76.1_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xsl
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main universal_variant is false, so not adding the default universal variant
:debug:main No need to upgrade! docbook-xsl 1.76.1_0 >= docbook-xsl 1.76.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main grantlee 0.1.6_1 exists in the ports tree
:debug:main grantlee 0.1.6_1  is the latest installed
:debug:main grantlee 0.1.6_1  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/grantlee
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/kde4-1.1.tcl
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/cmake-1.0.tcl
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/qt4-1.0.tcl
:debug:main Re-registering default for configure.dir
:debug:main Re-registering default for build.dir
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! grantlee 0.1.6_1 >= grantlee 0.1.6_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main shared-desktop-ontologies 0.5_1 exists in the ports tree
:debug:main shared-desktop-ontologies 0.5_1  is the latest installed
:debug:main shared-desktop-ontologies 0.5_1  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/shared-desktop-ontologies
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/kde4-1.1.tcl
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/cmake-1.0.tcl
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/qt4-1.0.tcl
:debug:main Re-registering default for configure.dir
:debug:main Re-registering default for build.dir
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! shared-desktop-ontologies 0.5_1 >= shared-desktop-ontologies 0.5_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main qimageblitz 0.0.6_0 exists in the ports tree
:debug:main qimageblitz 0.0.6_0  is the latest installed
:debug:main qimageblitz 0.0.6_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/qimageblitz
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/kde4-1.1.tcl
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/cmake-1.0.tcl
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/qt4-1.0.tcl
:debug:main Re-registering default for configure.dir
:debug:main Re-registering default for build.dir
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! qimageblitz 0.0.6_0 >= qimageblitz 0.0.6_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main oxygen-icons 4.5.86svn1205247_0 exists in the ports tree
:debug:main oxygen-icons 4.5.86svn1205247_0  is the latest installed
:debug:main oxygen-icons 4.5.86svn1205247_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/oxygen-icons
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/kde4-1.1.tcl
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/cmake-1.0.tcl
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/qt4-1.0.tcl
:debug:main Re-registering default for configure.dir
:debug:main Re-registering default for build.dir
:debug:main only one arch supported, so not adding the default universal variant
:debug:main No need to upgrade! oxygen-icons 4.5.86svn1205247_0 >= oxygen-icons 4.5.86svn1205247_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main hicolor-icon-theme 0.12_0 exists in the ports tree
:debug:main hicolor-icon-theme 0.12_0  is the latest installed
:debug:main hicolor-icon-theme 0.12_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/hicolor-icon-theme
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main only one arch supported, so not adding the default universal variant
:debug:main No need to upgrade! hicolor-icon-theme 0.12_0 >= hicolor-icon-theme 0.12_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main exiv2 0.21_0 exists in the ports tree
:debug:main exiv2 0.21_0  is the latest installed
:debug:main exiv2 0.21_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/exiv2
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! exiv2 0.21_0 >= exiv2 0.21_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main openslp 1.2.1_2 exists in the ports tree
:debug:main openslp 1.2.1_2  is the latest installed
:debug:main openslp 1.2.1_2  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openslp
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! openslp 1.2.1_2 >= openslp 1.2.1_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main bison 2.4.3_0 exists in the ports tree
:debug:main bison 2.4.3_0 +universal is the latest installed
:debug:main bison 2.4.3_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/bison
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! bison 2.4.3_0 >= bison 2.4.3_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main m4 1.4.15_2 exists in the ports tree
:debug:main m4 1.4.15_2 +universal is the latest installed
:debug:main m4 1.4.15_2 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! m4 1.4.15_2 >= m4 1.4.15_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main libqalculate 0.9.7_0 exists in the ports tree
:debug:main libqalculate 0.9.7_0  is the latest installed
:debug:main libqalculate 0.9.7_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/math/libqalculate
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! libqalculate 0.9.7_0 >= libqalculate 0.9.7_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main cln 1.3.1_0 exists in the ports tree
:debug:main cln 1.3.1_0  is the latest installed
:debug:main cln 1.3.1_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/math/cln
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! cln 1.3.1_0 >= cln 1.3.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main xmms 1.2.11_0 exists in the ports tree
:debug:main xmms 1.2.11_0  is the latest installed
:debug:main xmms 1.2.11_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/xmms
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xmms 1.2.11_0 >= xmms 1.2.11_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main glib1 1.2.10_6 exists in the ports tree
:debug:main glib1 1.2.10_6  is the latest installed
:debug:main glib1 1.2.10_6  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/glib1
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! glib1 1.2.10_6 >= glib1 1.2.10_6
:debug:main epoch: in tree: 0 installed: 0
:debug:main gtk1 1.2.10_9 exists in the ports tree
:debug:main gtk1 1.2.10_9  is the latest installed
:debug:main gtk1 1.2.10_9  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/gtk1
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! gtk1 1.2.10_9 >= gtk1 1.2.10_9
:debug:main epoch: in tree: 0 installed: 0
:debug:main xorg-libXt 1.0.9_0 exists in the ports tree
:debug:main xorg-libXt 1.0.9_0  is the latest installed
:debug:main xorg-libXt 1.0.9_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXt
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! xorg-libXt 1.0.9_0 >= xorg-libXt 1.0.9_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main esound 0.2.41_1 exists in the ports tree
:debug:main esound 0.2.41_1  is the latest installed
:debug:main esound 0.2.41_1  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/esound
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! esound 0.2.41_1 >= esound 0.2.41_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main audiofile 0.2.7_0 exists in the ports tree
:debug:main audiofile 0.2.7_0  is the latest installed
:debug:main audiofile 0.2.7_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/audiofile
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! audiofile 0.2.7_0 >= audiofile 0.2.7_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libvorbis 1.3.2_0 exists in the ports tree
:debug:main libvorbis 1.3.2_0  is the latest installed
:debug:main libvorbis 1.3.2_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/libvorbis
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! libvorbis 1.3.2_0 >= libvorbis 1.3.2_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libogg 1.2.2_0 exists in the ports tree
:debug:main libogg 1.2.2_0  is the latest installed
:debug:main libogg 1.2.2_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/libogg
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! libogg 1.2.2_0 >= libogg 1.2.2_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libmikmod 3.2.0-beta2_1 exists in the ports tree
:debug:main libmikmod 3.2.0-beta2_1  is the latest installed
:debug:main libmikmod 3.2.0-beta2_1  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/libmikmod
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! libmikmod 3.2.0-beta2_1 >= libmikmod 3.2.0-beta2_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main kdepimlibs4 4.5.4_0 exists in the ports tree
:debug:main kdepimlibs4 4.5.4_0  is the latest installed
:debug:main kdepimlibs4 4.5.4_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/kdepimlibs4
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/kde4-1.1.tcl
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/cmake-1.0.tcl
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/qt4-1.0.tcl
:debug:main Re-registering default for configure.dir
:debug:main Re-registering default for build.dir
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! kdepimlibs4 4.5.4_0 >= kdepimlibs4 4.5.4_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main akonadi 1.4.0_1 exists in the ports tree
:debug:main akonadi 1.4.0_1  is the latest installed
:debug:main akonadi 1.4.0_1  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/akonadi
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/kde4-1.1.tcl
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/cmake-1.0.tcl
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/qt4-1.0.tcl
:debug:main Re-registering default for configure.dir
:debug:main Re-registering default for build.dir
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! akonadi 1.4.0_1 >= akonadi 1.4.0_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main boost 1.45.0_2 exists in the ports tree
:debug:main boost 1.45.0_2  is the latest installed
:debug:main boost 1.45.0_2  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/boost
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! boost 1.45.0_2 >= boost 1.45.0_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main icu 4.6_0 exists in the ports tree
:debug:main icu 4.6_0  is the latest installed
:debug:main icu 4.6_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/icu
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! icu 4.6_0 >= icu 4.6_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main mysql5-server 5.1.53_0 exists in the ports tree
:debug:main mysql5-server 5.1.53_0  is the latest installed
:debug:main mysql5-server 5.1.53_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/mysql5-server
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main universal_variant is false, so not adding the default universal variant
:debug:main No need to upgrade! mysql5-server 5.1.53_0 >= mysql5-server 5.1.53_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main mysql5 5.1.53_0 exists in the ports tree
:debug:main mysql5 5.1.53_0  is the latest installed
:debug:main mysql5 5.1.53_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/mysql5
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! mysql5 5.1.53_0 >= mysql5 5.1.53_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libical 0.43_1 exists in the ports tree
:debug:main libical 0.43_1  is the latest installed
:debug:main libical 0.43_1  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libical
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! libical 0.43_1 >= libical 0.43_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main openldap 2.4.21_3 exists in the ports tree
:debug:main openldap 2.4.21_3  is the latest installed
:debug:main openldap 2.4.21_3  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/openldap
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! openldap 2.4.21_3 >= openldap 2.4.21_3
:debug:main epoch: in tree: 0 installed: 0
:debug:main gpgme 1.3.0_0 exists in the ports tree
:debug:main gpgme 1.3.0_0  is the latest installed
:debug:main gpgme 1.3.0_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gpgme
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! gpgme 1.3.0_0 >= gpgme 1.3.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main gnupg 1.4.11_0 exists in the ports tree
:debug:main gnupg 1.4.11_0  is the latest installed
:debug:main gnupg 1.4.11_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/mail/gnupg
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! gnupg 1.4.11_0 >= gnupg 1.4.11_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libusb-compat 0.1.3_0 exists in the ports tree
:debug:main libusb-compat 0.1.3_0  is the latest installed
:debug:main libusb-compat 0.1.3_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libusb-compat
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! libusb-compat 0.1.3_0 >= libusb-compat 0.1.3_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libusb 1.0.8_0 exists in the ports tree
:debug:main libusb 1.0.8_0  is the latest installed
:debug:main libusb 1.0.8_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libusb
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! libusb 1.0.8_0 >= libusb 1.0.8_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main pth 2.0.7_0 exists in the ports tree
:debug:main pth 2.0.7_0  is the latest installed
:debug:main pth 2.0.7_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pth
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! pth 2.0.7_0 >= pth 2.0.7_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libgpg-error 1.10_0 exists in the ports tree
:debug:main libgpg-error 1.10_0  is the latest installed
:debug:main libgpg-error 1.10_0  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libgpg-error
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! libgpg-error 1.10_0 >= libgpg-error 1.10_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libassuan 2.0.1_1 exists in the ports tree
:debug:main libassuan 2.0.1_1  is the latest installed
:debug:main libassuan 2.0.1_1  is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants: 
:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libassuan
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! libassuan 2.0.1_1 >= libassuan 2.0.1_1
:msg:main --->  Computing dependencies for kdebase4-workspace:info:main .:debug:main Searching for dependency: cmake
:debug:main Found Dependency: receipt exists for cmake
:debug:main Searching for dependency: pkgconfig
:debug:main Found Dependency: receipt exists for pkgconfig
:debug:main Searching for dependency: automoc
:debug:main Found Dependency: receipt exists for automoc
:debug:main Searching for dependency: qt4-mac
:debug:main Found Dependency: receipt exists for qt4-mac
:debug:main Searching for dependency: phonon
:debug:main Found Dependency: receipt exists for phonon
:debug:main Searching for dependency: kdebase4-runtime
:debug:main Found Dependency: receipt exists for kdebase4-runtime
:debug:main Searching for dependency: qimageblitz
:debug:main Found Dependency: receipt exists for qimageblitz
:debug:main Searching for dependency: libqalculate
:debug:main Found Dependency: receipt exists for libqalculate
:debug:main Searching for dependency: xmms
:debug:main Found Dependency: receipt exists for xmms
:debug:main Searching for dependency: kdepimlibs4
:debug:main Found Dependency: receipt exists for kdepimlibs4
:msg:main 
:debug:main Executing org.macports.main (kdebase4-workspace)
:msg:main --->  Fetching kdebase4-workspace
:debug:fetch fetch phase started at Sat Jan  8 21:09:37 PST 2011
:debug:fetch Executing org.macports.fetch (kdebase4-workspace)
:msg:fetch --->  Verifying checksum(s) for kdebase4-workspace
:debug:checksum checksum phase started at Sat Jan  8 21:09:37 PST 2011
:debug:checksum Executing org.macports.checksum (kdebase4-workspace)
:info:checksum --->  Checksumming kdebase-workspace-4.5.2.tar.bz2
:debug:checksum Correct (sha1) checksum for kdebase-workspace-4.5.2.tar.bz2
:debug:checksum Correct (rmd160) checksum for kdebase-workspace-4.5.2.tar.bz2
:debug:checksum setting option extract.cmd to /usr/bin/bzip2
:msg:checksum --->  Extracting kdebase4-workspace
:debug:extract extract phase started at Sat Jan  8 21:09:39 PST 2011
:debug:extract Executing proc-pre-org.macports.extract-extract-0
:debug:extract Executing org.macports.extract (kdebase4-workspace)
:info:extract --->  Extracting kdebase-workspace-4.5.2.tar.bz2
:debug:extract setting option extract.args to '/opt/local/var/macports/distfiles/kdebase4-workspace/kdebase-workspace-4.5.2.tar.bz2'
:debug:extract Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_kde_kdebase4-workspace/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6'
:debug:extract Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_kde_kdebase4-workspace/work" && /usr/bin/bzip2 -dc '/opt/local/var/macports/distfiles/kdebase4-workspace/kdebase-workspace-4.5.2.tar.bz2' | /usr/bin/gnutar --no-same-owner -xf -'
:debug:extract Executing proc-post-org.macports.extract-extract-0
:debug:extract Executing proc-post-org.macports.extract-extract-1
:debug:patch patch phase started at Sat Jan  8 21:11:06 PST 2011
:debug:patch Executing org.macports.patch (kdebase4-workspace)
:msg:patch --->  Configuring kdebase4-workspace
:debug:patch Using compiler 'Mac OS X gcc 4.2'
:debug:configure configure phase started at Sat Jan  8 21:11:06 PST 2011
:debug:configure Executing proc-pre-org.macports.configure-configure-0
:debug:configure Executing org.macports.configure (kdebase4-workspace)
:debug:configure Environment: CPATH='/opt/local/include' CFLAGS='-O2 -arch x86_64' CXXFLAGS='-O2 -arch x86_64' LIBRARY_PATH='/opt/local/lib' MACOSX_DEPLOYMENT_TARGET='10.6' PKG_CONFIG_PATH='/opt/local/lib/pkgconfig' CXX='/usr/bin/g++-4.2' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_kde_kdebase4-workspace/work/.CC_PRINT_OPTIONS' F90FLAGS='-O2 -m64' LDFLAGS='-arch x86_64' FCFLAGS='-O2 -m64' OBJC='/usr/bin/gcc-4.2' INSTALL='/usr/bin/install -c' MOC='/opt/local/bin/moc' OBJCFLAGS='-O2 -arch x86_64' FFLAGS='-O2 -m64' QTDIR='/opt/local' CC_PRINT_OPTIONS='YES' CC='/usr/bin/gcc-4.2' QMAKE='/opt/local/bin/qmake'
:debug:configure Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_kde_kdebase4-workspace/work/build" && cmake -DCMAKE_INSTALL_PREFIX=/opt/local -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_COLOR_MAKEFILE=ON -DCMAKE_BUILD_TYPE=Release -DCMAKE_BUILD_WITH_INSTALL_RPATH=ON -DCMAKE_INSTALL_NAME_DIR=/opt/local/lib -DCMAKE_SYSTEM_PREFIX_PATH="/opt/local;/usr" -DCMAKE_MODULE_PATH=/opt/local/share/cmake/modules -Wno-dev -DBUILD_doc=OFF -DBUILD_SHARED_LIBS=ON -DBUNDLE_INSTALL_DIR=/Applications/MacPorts/KDE4 -DKDE_DISTRIBUTION_TEXT="MacPorts/Mac OS X" -DQT_QT_INCLUDE_DIR=/opt/local/include  -DQT_ZLIB_LIBRARY=/opt/local/lib/libz.dylib  -DQT_PNG_LIBRARY=/opt/local/lib/libpng.dylib -DDOCBOOKXSL_DIR=/opt/local/share/xsl/docbook-xsl -DGETTEXT_INCLUDE_DIR=/opt/local/include -DGETTEXT_LIBRARY=/opt/local/libgettextlib.dylib -DGIF_INCLUDE_DIR=/opt/local/include -DGIF_LIBRARY=/opt/local/libgif.dylib -DJASPER_INCLUDE_DIR=/opt/local/include -DJASPER_LIBRARY=/opt/local/lib/libjasper.dylib -DJPEG_INCLUDE_DIR=/opt/local/include -DJPEG_LIBRARY=/opt/local/lib/libjpeg.dylib -DLBER_LIBRARIES=/opt/local/lib/liblber.dylib -DLDAP_INCLUDE_DIR=/opt/local/include -DLDAP_LIBRARIES=/opt/local/lib/libldap.dylib -DLIBEXSLT_INCLUDE_DIR=/opt/local/include -DLIBEXSLT_LIBRARIES=/opt/local/lib/libexslt.dylib -DLIBINTL_INCLUDE_DIR=/opt/local/include -DLIBINTL_LIBRARY=/opt/local/lib/libintl.dylib -DLIBXSLT_INCLUDE_DIR=/opt/local/include -DLIBXSLT_LIBRARIES=/opt/local/lib/libxslt.dylib -DMYSQLD_EXECUTABLE=/opt/local/libexec/mysqld -DMYSQL_INCLUDE_DIR=/opt/local/include/mysql5/mysql -DMYSQL_LIB_DIR=/opt/local/lib/mysql5/mysql -DMYSQLCONFIG_EXECUTABLE=/opt/local/bin/mysql_config5 -DPNG_INCLUDE_DIR=/opt/local/include -DPNG_PNG_INCLUDE_DIR=/opt/local/include -DPNG_LIBRARY=/opt/local/lib/libpng.dylib -DQCA2_INCLUDE_DIR=/opt/local/include/QtCrypto -DQCA2_LIBRARIES=/opt/local/lib/libqca.dylib -DTIFF_INCLUDE_DIR=/opt/local/include -DTIFF_LIBRARY=/opt/local/lib/libtiff.dylib -DCMAKE_OSX_ARCHITECTURES="x86_64" ../kdebase-workspace-4.5.2'
:info:configure -- The C compiler identification is GNU
:info:configure -- The CXX compiler identification is GNU
:info:configure -- Checking whether C compiler has -isysroot
:info:configure -- Checking whether C compiler has -isysroot - yes
:info:configure -- Checking whether C compiler supports OSX deployment target flag
:info:configure -- Checking whether C compiler supports OSX deployment target flag - yes
:info:configure -- Check for working C compiler: /usr/bin/gcc-4.2
:info:configure -- Check for working C compiler: /usr/bin/gcc-4.2 -- works
:info:configure -- Detecting C compiler ABI info
:info:configure -- Detecting C compiler ABI info - done
:info:configure -- Checking whether CXX compiler has -isysroot
:info:configure -- Checking whether CXX compiler has -isysroot - yes
:info:configure -- Checking whether CXX compiler supports OSX deployment target flag
:info:configure -- Checking whether CXX compiler supports OSX deployment target flag - yes
:info:configure -- Check for working CXX compiler: /usr/bin/g++-4.2
:info:configure -- Check for working CXX compiler: /usr/bin/g++-4.2 -- works
:info:configure -- Detecting CXX compiler ABI info
:info:configure -- Detecting CXX compiler ABI info - done
:info:configure -- Looking for Q_WS_X11
:info:configure -- Looking for Q_WS_X11 - not found.
:info:configure -- Looking for Q_WS_WIN
:info:configure -- Looking for Q_WS_WIN - not found.
:info:configure -- Looking for Q_WS_QWS
:info:configure -- Looking for Q_WS_QWS - not found.
:info:configure -- Looking for Q_WS_MAC
:info:configure -- Looking for Q_WS_MAC - found
:info:configure -- Looking for QT_MAC_USE_COCOA
:info:configure -- Looking for QT_MAC_USE_COCOA - found
:info:configure -- Found Qt-Version 4.7.1
:info:configure --  -> QT_QMAKE_EXECUTABLE is /opt/local/bin/qmake
:info:configure --  -> QT_INCLUDE_DIR is /opt/local/include
:info:configure --  -> QT_QTCORE_INCLUDE_DIR is /opt/local/include/QtCore
:info:configure --  -> QT_BINARY_DIR is /opt/local/bin
:info:configure --  -> QT_LIBRARY_DIR is /opt/local/lib
:info:configure --  -> QT_PLUGINS_DIR is /opt/local/share/qt4/plugins
:info:configure --  -> QT_MKSPECS_DIR is /opt/local/share/qt4/mkspecs
:info:configure -- Looking for include files CMAKE_HAVE_PTHREAD_H
:info:configure -- Looking for include files CMAKE_HAVE_PTHREAD_H - found
:info:configure -- Looking for pthread_create in pthreads
:info:configure -- Looking for pthread_create in pthreads - not found
:info:configure -- Looking for pthread_create in pthread
:info:configure -- Looking for pthread_create in pthread - found
:info:configure -- Found Threads: TRUE 
:info:configure -- Found OpenSSL: /opt/local/lib/libssl.dylib
:info:configure -- Found Automoc4: /opt/local/bin/automoc4 
:info:configure -- Found Perl: /opt/local/bin/perl 
:info:configure -- Phonon Version: 4.4.2
:info:configure -- Found Phonon: /opt/local/lib/libphonon.dylib
:info:configure -- Found Phonon Includes: /opt/local/include/KDE;/opt/local/include
:info:configure -- Performing Test _OFFT_IS_64BIT
:info:configure -- Performing Test _OFFT_IS_64BIT - Success
:info:configure -- Performing Test HAVE_FPIE_SUPPORT
:info:configure -- Performing Test HAVE_FPIE_SUPPORT - Success
:info:configure -- Performing Test __KDE_HAVE_W_OVERLOADED_VIRTUAL
:info:configure -- Performing Test __KDE_HAVE_W_OVERLOADED_VIRTUAL - Success
:info:configure -- Performing Test __KDE_HAVE_GCC_VISIBILITY
:info:configure -- Performing Test __KDE_HAVE_GCC_VISIBILITY - Success
:info:configure -- Found KDE 4.5 include dir: /opt/local/include
:info:configure -- Found KDE 4.5 library dir: /opt/local/lib
:info:configure -- Found the KDE4 kconfig_compiler preprocessor: /opt/local/bin/kconfig_compiler
:info:configure -- Found automoc4: /opt/local/bin/automoc4
:info:configure -- Strigi API needs 'signed char'
:info:configure -- Found Strigi: /opt/local/lib/libstreams.dylib 
:info:configure -- Found QImageBlitz: /opt/local/include/qimageblitz 
:info:configure -- Found ZLIB: /opt/local/include (found version "1.2.5")
:info:configure -- Found DBusMenuQt: /opt/local/lib/libdbusmenu-qt.dylib 
:info:configure -- Found GLIB2: /opt/local/lib/libglib-2.0.dylib 
:info:configure -- Found Fontconfig: /opt/local/lib/libfontconfig.dylib 
:info:configure -- Could NOT find Googlegadgets  (missing:  GOOGLEGADGETS_LIBRARIES GOOGLEGADGETS_INCLUDE_DIRS) 
:info:configure -- checking for modules 'qzion>=0.4.0;qedje>=0.4.0'
:info:configure --   package 'qzion>=0.4.0' not found
:info:configure --   package 'qedje>=0.4.0' not found
:info:configure -- Could not find QZion and/or QEdje. Please download them here (http://code.openbossa.org/projects/qedje/pages/Home).
:info:configure -- Could NOT find QEdje  (missing:  QEDJE_LIBRARIES QEDJE_INCLUDE_DIRS) 
:info:configure -- Found PythonInterp: /opt/local/bin/python2.7 
:info:configure -- Found Python executable: /opt/local/bin/python2.7
:info:configure -- Found Python version: 2.7.1
:info:configure -- Found Python library: -framework Python
:info:configure -- Found SIP version: 4.12
:info:configure -- Found PyQt4 version: 4.8.2
:info:configure Traceback (most recent call last):
:info:configure   File "/opt/local/share/apps/cmake/modules/FindPyKDE4.py", line 8, in <module>
:info:configure     import PyKDE4.pykdeconfig
:info:configure ImportError: No module named PyKDE4.pykdeconfig
:info:configure -- Found Soprano: /opt/local/include 
:info:configure -- Found SharedDesktopOntologies: /opt/local/share/ontology 
:info:configure -- Found Nepomuk: /opt/local/lib/libnepomuk.dylib 
:info:configure -- Could NOT find PolkitQt  (missing:  POLKITQT_INCLUDE_DIR POLKITQT_GUI_LIBRARY POLKITQT_CORE_LIBRARY) 
:info:configure -- Performing Test PAM_MESSAGE_CONST
:info:configure -- Performing Test PAM_MESSAGE_CONST - Success
:info:configure -- Found PAM: /usr/lib/libpam.dylib;/usr/lib/libdl.dylib
:info:configure -- Looking for getspnam
:info:configure -- Looking for getspnam - not found
:info:configure -- Looking for getspnam
:info:configure -- Looking for getspnam - not found
:info:configure -- Looking for getspnam
:info:configure -- Looking for getspnam - not found
:info:configure -- Looking for crypt in crypt
:info:configure -- Looking for crypt in crypt - not found
:info:configure -- Looking for XkbLockModifiers in X11
:info:configure -- Looking for XkbLockModifiers in X11 - found
:info:configure -- Looking for getpassphrase
:info:configure -- Looking for getpassphrase - not found
:info:configure -- Looking for vsyslog
:info:configure -- Looking for vsyslog - found
:info:configure -- Looking for statvfs
:info:configure -- Looking for statvfs - found
:info:configure -- Looking for include files HAVE_LIMITS_H
:info:configure -- Looking for include files HAVE_LIMITS_H - found
:info:configure -- Looking for include files HAVE_SYS_TIME_H
:info:configure -- Looking for include files HAVE_SYS_TIME_H - found
:info:configure -- Looking for include files HAVE_STDINT_H
:info:configure -- Looking for include files HAVE_STDINT_H - found
:info:configure -- Looking for include files HAVE_SYS_VFS_H
:info:configure -- Looking for include files HAVE_SYS_VFS_H - not found.
:info:configure -- Looking for include files HAVE_SYS_STATVFS_H
:info:configure -- Looking for include files HAVE_SYS_STATVFS_H - found
:info:configure -- Looking for include files HAVE_SYS_PARAM_H
:info:configure -- Looking for include files HAVE_SYS_PARAM_H - found
:info:configure -- Looking for include files HAVE_SYS_MOUNT_H
:info:configure -- Looking for include files HAVE_SYS_MOUNT_H - found
:info:configure -- Looking for include files HAVE_SYS_STATFS_H
:info:configure -- Looking for include files HAVE_SYS_STATFS_H - not found.
:info:configure -- Looking for statfs
:info:configure -- Looking for statfs - found
:info:configure -- Looking for sys/types.h
:info:configure -- Looking for sys/types.h - found
:info:configure -- Looking for stddef.h
:info:configure -- Looking for stddef.h - found
:info:configure -- Check size of struct ucred
:info:configure -- Check size of struct ucred - failed
:info:configure -- Looking for getpeereid
:info:configure -- Looking for getpeereid - found
:info:configure -- Looking for setpriority
:info:configure -- Looking for setpriority - found
:info:configure -- checking for module 'xrandr>=1.2'
:info:configure --   found xrandr, version 1.3.1
:info:configure -- Found Qt-Version 4.7.1 (using /opt/local/bin/qmake)
:info:configure -- Looking for include files HAVE_SYS_ENDIAN_H
:info:configure -- Looking for include files HAVE_SYS_ENDIAN_H - not found.
:info:configure -- Looking for include files HAVE_BYTESWAP_H
:info:configure -- Looking for include files HAVE_BYTESWAP_H - not found.
:info:configure -- Looking for include files HAVE_PATHS_H
:info:configure -- Looking for include files HAVE_PATHS_H - found
:info:configure -- Looking for _IceTransNoListen in ICE
:info:configure -- Looking for _IceTransNoListen in ICE - found
:info:configure -- Performing Test HAVE_MMMX
:info:configure -- Performing Test HAVE_MMMX - Success
:info:configure -- Found PNG: /opt/local/lib/libpng.dylib 
:info:configure -- Found JPEG: /opt/local/lib/libjpeg.dylib 
:info:configure -- Performing Test X86_MMX_FOUND
:info:configure -- Performing Test X86_MMX_FOUND - Success
:info:configure -- Could NOT find Sensors  (missing:  SENSORS_INCLUDE_DIR SENSORS_LIBRARIES) 
:info:configure -- Looking for include files SYS_INOTIFY_H_FOUND
:info:configure -- Looking for include files SYS_INOTIFY_H_FOUND - not found.
:info:configure CMake Error at ksysguard/ksysguardd/CMakeLists.txt:33 (add_subdirectory):
:info:configure   add_subdirectory given source "Darwin" which is not an existing directory.
:info:configure 
:info:configure 
:info:configure -- Looking for XF86MiscSetGrabKeysState in Xxf86misc
:info:configure -- Looking for XF86MiscSetGrabKeysState in Xxf86misc - found
:info:configure -- Looking for glXChooseVisual in GL
:info:configure -- Looking for glXChooseVisual in GL - found
:info:configure -- checking for one of the modules 'NetworkManager'
:info:configure -- checking for one of the modules 'libnm-util'
:info:configure -- Could NOT find BlueZ  (missing:  BLUEZ_INCLUDE_DIR BLUEZ_LIBRARIES) 
:info:configure -- Looking for XScreenSaverQueryInfo in Xss
:info:configure -- Looking for XScreenSaverQueryInfo in Xss - found
:info:configure -- Could NOT find libgps  (missing:  LIBGPS_INCLUDE_DIR LIBGPS_LIBRARIES) 
:info:configure -- Found Xmms: /opt/local/lib/libxmms.dylib 
:info:configure -- Found XMMS: the nowplaying dataengine will support XMMS 1.x
:info:configure -- Found KdepimLibs: /opt/local/lib/cmake/KdepimLibs/KdepimLibsConfig.cmake 
:info:configure -- Boost version: 1.45.0
:info:configure -- Found Akonadi: /opt/local/lib/cmake/Akonadi/AkonadiConfig.cmake 
:info:configure -- Found Qalculate: -L/opt/local/lib -lcln -lgmp -lqalculate -lglib-2.0 -lintl -lxml2 -lpthread -lz -liconv -lm 
:info:configure -- Found Freetype: -L/opt/local/lib -lfreetype -lz
:info:configure -- Found LIBUSB: /opt/local/lib/libusb.dylib 
:info:configure /opt/local/share/dbus-1/interfaces
:info:configure -- Xau lib or Xdmcp lib was missing. kdm will not compile
:info:configure 
:info:configure -----------------------------------------------------------------------------
:info:configure -- The following external packages were located on your system.
:info:configure -- This installation will have the extra features provided by these packages.
:info:configure -----------------------------------------------------------------------------
:info:configure    * DBusMenuQt - API to import export QMenu instance using DBusMenu protocol
:info:configure    * glib2 - Low-level core library for data structure handling, portability wrappers, etc.
:info:configure    * Soprano - Semantic Desktop Storing
:info:configure    * Shared desktop ontologies - Desktop ontologies
:info:configure    * Nepomuk - Nepomuk Libraries
:info:configure    * XMMS - X MultiMedia System development libraries
:info:configure    * kdepimlibs - KDE PIM libraries
:info:configure    * Qalculate! - Qalculate Library
:info:configure    * Soprano - Semantic Desktop Storing
:info:configure    * FreeType - A font rendering engine
:info:configure    * libusb - User level access to USB devices
:info:configure 
:info:configure -----------------------------------------------------------------------------
:info:configure -- The following OPTIONAL packages could NOT be located on your system.
:info:configure -- Consider installing them to enable more features from this software.
:info:configure -----------------------------------------------------------------------------
:info:configure    * GoogleGadgets (0.11.0 or higher)  <http://code.google.com/p/google-gadgets-for-linux/>
:info:configure      Google Gadgets library
:info:configure      Needed to build plasma scriptengine for google gadgets
:info:configure    * QEdje  <http://code.openbossa.org/projects/qedje/pages/Home>
:info:configure      QEdje library
:info:configure      Needed to build plasma scriptengine for edje files
:info:configure    * Polkit-Qt  <kdesupport>
:info:configure      Qt Wrapper around PolicyKit
:info:configure      Required to build PolicyKit-KDE
:info:configure    * Compositing support  <http://www.x.org/>
:info:configure      X11 Compositing support
:info:configure      XComposite and XDamage extensions and OpenGL or XRender with XFixes are required for KWin compositing support
:info:configure    * lm-sensors  <http://www.lm-sensors.org>
:info:configure      Sensors support for ksysguard
:info:configure    * libxss  <http://www.x.org/>
:info:configure      XScreenSaver Library
:info:configure      Needed to enable screensaver status check
:info:configure    * BlueZ  <http://www.bluez.org>
:info:configure      BlueZ is the Linux Bluetooth protocol stack
:info:configure      For Bluetooth support in KDE
:info:configure    * NetworkManager (0.6.5 or higher)  <http://www.gnome.org/projects/NetworkManager>
:info:configure      A daemon for user controlled networking
:info:configure      Needed for building Network Management support in Solid.
:info:configure    * libgps  <http://gpsd.berlios.de/>
:info:configure      GPS support for geolocation
:info:configure    * libxft  <http://www.x.org>
:info:configure      X FreeType interface library
:info:configure      Font installer and font previews
:info:configure 
:info:configure -----------------------------------------------------------------------------
:info:configure 
:info:configure -- Configuring incomplete, errors occurred!
:info:configure shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_kde_kdebase4-workspace/work/build" && cmake -DCMAKE_INSTALL_PREFIX=/opt/local -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_COLOR_MAKEFILE=ON -DCMAKE_BUILD_TYPE=Release -DCMAKE_BUILD_WITH_INSTALL_RPATH=ON -DCMAKE_INSTALL_NAME_DIR=/opt/local/lib -DCMAKE_SYSTEM_PREFIX_PATH="/opt/local;/usr" -DCMAKE_MODULE_PATH=/opt/local/share/cmake/modules -Wno-dev -DBUILD_doc=OFF -DBUILD_SHARED_LIBS=ON -DBUNDLE_INSTALL_DIR=/Applications/MacPorts/KDE4 -DKDE_DISTRIBUTION_TEXT="MacPorts/Mac OS X" -DQT_QT_INCLUDE_DIR=/opt/local/include  -DQT_ZLIB_LIBRARY=/opt/local/lib/libz.dylib  -DQT_PNG_LIBRARY=/opt/local/lib/libpng.dylib -DDOCBOOKXSL_DIR=/opt/local/share/xsl/docbook-xsl -DGETTEXT_INCLUDE_DIR=/opt/local/include -DGETTEXT_LIBRARY=/opt/local/libgettextlib.dylib -DGIF_INCLUDE_DIR=/opt/local/include -DGIF_LIBRARY=/opt/local/libgif.dylib -DJASPER_INCLUDE_DIR=/opt/local/include -DJASPER_LIBRARY=/opt/local/lib/libjasper.dylib -DJPEG_INCLUDE_DIR=/opt/local/include -DJPEG_LIBRARY=/opt/local/lib/libjpeg.dylib -DLBER_LIBRARIES=/opt/local/lib/liblber.dylib -DLDAP_INCLUDE_DIR=/opt/local/include -DLDAP_LIBRARIES=/opt/local/lib/libldap.dylib -DLIBEXSLT_INCLUDE_DIR=/opt/local/include -DLIBEXSLT_LIBRARIES=/opt/local/lib/libexslt.dylib -DLIBINTL_INCLUDE_DIR=/opt/local/include -DLIBINTL_LIBRARY=/opt/local/lib/libintl.dylib -DLIBXSLT_INCLUDE_DIR=/opt/local/include -DLIBXSLT_LIBRARIES=/opt/local/lib/libxslt.dylib -DMYSQLD_EXECUTABLE=/opt/local/libexec/mysqld -DMYSQL_INCLUDE_DIR=/opt/local/include/mysql5/mysql -DMYSQL_LIB_DIR=/opt/local/lib/mysql5/mysql -DMYSQLCONFIG_EXECUTABLE=/opt/local/bin/mysql_config5 -DPNG_INCLUDE_DIR=/opt/local/include -DPNG_PNG_INCLUDE_DIR=/opt/local/include -DPNG_LIBRARY=/opt/local/lib/libpng.dylib -DQCA2_INCLUDE_DIR=/opt/local/include/QtCrypto -DQCA2_LIBRARIES=/opt/local/lib/libqca.dylib -DTIFF_INCLUDE_DIR=/opt/local/include -DTIFF_LIBRARY=/opt/local/lib/libtiff.dylib -DCMAKE_OSX_ARCHITECTURES="x86_64" ../kdebase-workspace-4.5.2 " returned error 1
:error:configure Target org.macports.configure returned: configure failure: shell command failed (see log for details)
:debug:configure Backtrace: configure failure: shell command failed (see log for details)
    while executing
"$procedure $targetname"
:info:configure Warning: the following items did not execute (for kdebase4-workspace): org.macports.activate org.macports.configure org.macports.build org.macports.destroot org.macports.install
:notice:configure Log for kdebase4-workspace is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_kde_kdebase4-workspace/main.log

Change History (5)

comment:1 Changed 13 years ago by jmroot (Joshua Root)

Owner: changed from macports-tickets@… to snc@…
Port: kdebase4-workspace added

Please remember to fill in the Port field and cc the maintainer, and in future please use an attachment for lengthy files.

comment:2 Changed 13 years ago by nerdling (Jeremy Lavergne)

Resolution: wontfix
Status: newclosed

KDE Workspace doesn't even know how to build on a Mac: the error message about no Darwin directory is because they did not supply a build directory for on the Mac.

At the very minimum, to convert one of the Linux ones would require going through and replacing all the variables in the file. Unfortunately, much more is likely needed which is why they have separate directories for each platform.

This is one I'm just not interested in fixing. Feel free to file a bug upstream at bugs.kde.org.

comment:3 Changed 13 years ago by jmroot (Joshua Root)

If this port doesn't work at all, please remove it from the main ports tree.

comment:4 Changed 13 years ago by ratonovitch@…

I believe kdebase4-workspace contains startkde, which is required to start the kde4 X11 window manager. Without startkde, aren't all the kde4 ports useless?

comment:5 Changed 13 years ago by nerdling (Jeremy Lavergne)

kdelibs4 has /opt/local/lib/kde4/libexec/start_kdeinit.app/

Removed in r74959.

Note: See TracTickets for help on using tickets.