Opened 12 years ago

Closed 12 years ago

#35545 closed defect (fixed)

perl5.8: error: address expression must be an lvalue or a function designator

Reported by: normann@… Owned by: ghosthound
Priority: Normal Milestone:
Component: ports Version: 2.1.2
Keywords: mountainlion clang Cc: whcordis@…, neverpanic (Clemens Lang)
Port: perl5.8

Description (last modified by ryandesign (Ryan Carsten Schmidt))

Recently I upgrade to OS X 10.8 (Mountain Lion) on my MacBook, and when running a macport upgrade outdated, it stoped on biulding perl5.8.

The full logs are here:

version:1
:debug:clean perl5.8 has no conflicts
:debug:main Executing org.macports.main (perl5.8)
:debug:main changing euid/egid - current euid: 0 - current egid: 0
:debug:main egid changed to: 502
:debug:main euid changed to: 502
:debug:archivefetch archivefetch phase started at Mon Aug  6 11:36:11 NZST 2012
:msg:archivefetch --->  Fetching archive for perl5.8
:debug:archivefetch Executing org.macports.archivefetch (perl5.8)
:debug:archivefetch euid/egid changed to: 0/0
:debug:archivefetch chowned /opt/local/var/macports/incoming to macports
:debug:archivefetch euid/egid changed to: 502/502
:info:archivefetch --->  perl5.8-5.8.9_8.darwin_12.x86_64.tbz2 doesn't seem to exist in /opt/local/var/macports/incoming/verified
:msg:archivefetch --->  Attempting to fetch perl5.8-5.8.9_8.darwin_12.x86_64.tbz2 from http://packages.macports.org/perl5.8
:debug:archivefetch Fetching archive failed:: The requested URL returned error: 404
:debug:archivefetch Privilege de-escalation not attempted as not running as root.
:debug:fetch fetch phase started at Mon Aug  6 11:36:12 NZST 2012
:notice:fetch --->  Fetching distfiles for perl5.8
:debug:fetch euid/egid changed to: 0/0
:debug:fetch chowned /opt/local/var/macports/distfiles/perl5.8 to macports
:debug:fetch euid/egid changed to: 502/502
:debug:fetch Executing org.macports.fetch (perl5.8)
:debug:fetch Privilege de-escalation not attempted as not running as root.
:debug:checksum checksum phase started at Mon Aug  6 11:36:12 NZST 2012
:notice:checksum --->  Verifying checksum(s) for perl5.8
:debug:checksum Executing org.macports.checksum (perl5.8)
:info:checksum --->  Checksumming perl-5.8.9.tar.bz2
:debug:checksum Correct (md5) checksum for perl-5.8.9.tar.bz2
:debug:checksum Correct (sha1) checksum for perl-5.8.9.tar.bz2
:debug:checksum Correct (rmd160) checksum for perl-5.8.9.tar.bz2
:debug:checksum Privilege de-escalation not attempted as not running as root.
:debug:extract extract phase started at Mon Aug  6 11:36:12 NZST 2012
:notice:extract --->  Extracting perl5.8
:debug:extract setting option extract.cmd to /usr/bin/bzip2
:debug:extract Executing org.macports.extract (perl5.8)
:info:extract --->  Extracting perl-5.8.9.tar.bz2
:debug:extract setting option extract.args to '/opt/local/var/macports/distfiles/perl5.8/perl-5.8.9.tar.bz2'
:debug:extract Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_perl5.8/perl5.8/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.8'
:debug:extract Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_perl5.8/perl5.8/work" && /usr/bin/bzip2 -dc '/opt/local/var/macports/distfiles/perl5.8/perl-5.8.9.tar.bz2' | /usr/bin/gnutar --no-same-owner -xf -'
:debug:extract Executing command line:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_perl5.8/perl5.8/work" && /usr/bin/bzip2 -dc '/opt/local/var/macports/distfiles/perl5.8/perl-5.8.9.tar.bz2' | /usr/bin/gnutar --no-same-owner -xf - 
:debug:extract euid/egid changed to: 0/0
:debug:extract chowned /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_perl5.8/perl5.8/work to macports
:debug:extract euid/egid changed to: 502/502
:debug:extract Privilege de-escalation not attempted as not running as root.
:debug:patch patch phase started at Mon Aug  6 11:36:18 NZST 2012
:debug:patch Executing org.macports.patch (perl5.8)
:notice:patch --->  Applying patches to perl5.8
:info:patch --->  Applying patch-perl.c.diff
:debug:patch Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_perl5.8/perl5.8/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.8'
:debug:patch Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_perl5.8/perl5.8/work/perl-5.8.9" && /usr/bin/patch -p0'
:debug:patch Executing command line:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_perl5.8/perl5.8/work/perl-5.8.9" && /usr/bin/patch -p0 < '/opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8/files/patch-perl.c.diff'
:info:patch patching file perl.c
:info:patch --->  Applying patch-Configure.diff
:debug:patch Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_perl5.8/perl5.8/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.8'
:debug:patch Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_perl5.8/perl5.8/work/perl-5.8.9" && /usr/bin/patch -p0'
:debug:patch Executing command line:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_perl5.8/perl5.8/work/perl-5.8.9" && /usr/bin/patch -p0 < '/opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8/files/patch-Configure.diff'
:info:patch patching file Configure
:debug:patch Executing proc-post-org.macports.patch-patch-0
:debug:patch Executing reinplace: /usr/bin/sed s|/opt/local|/opt/local|g < /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_perl5.8/perl5.8/work/perl-5.8.9/Configure >@ file12
:debug:patch euid/egid changed to: 0/0
:debug:patch chowned /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_perl5.8/perl5.8/work/perl-5.8.9/Configure to macports
:debug:patch euid/egid changed to: 502/502
:debug:patch euid/egid changed to: 0/0
:debug:patch setting attributes on /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_perl5.8/perl5.8/work/perl-5.8.9/Configure
:debug:patch euid/egid changed to: 502/502
:debug:patch Executing reinplace: /usr/bin/sed {s|ld='cc';||} < /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_perl5.8/perl5.8/work/perl-5.8.9/hints/darwin.sh >@ file12
:debug:patch euid/egid changed to: 0/0
:debug:patch chowned /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_perl5.8/perl5.8/work/perl-5.8.9/hints/darwin.sh to macports
:debug:patch euid/egid changed to: 502/502
:debug:patch euid/egid changed to: 0/0
:debug:patch setting attributes on /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_perl5.8/perl5.8/work/perl-5.8.9/hints/darwin.sh
:debug:patch euid/egid changed to: 502/502
:debug:patch Executing proc-post-org.macports.patch-patch-1
:debug:patch Executing reinplace: /usr/bin/sed {s|\(libswanted=.*\)bind *\(.*\)|\1\2|} < /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_perl5.8/perl5.8/work/perl-5.8.9/Configure >@ file12
:debug:patch euid/egid changed to: 0/0
:debug:patch chowned /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_perl5.8/perl5.8/work/perl-5.8.9/Configure to macports
:debug:patch euid/egid changed to: 502/502
:debug:patch euid/egid changed to: 0/0
:debug:patch setting attributes on /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_perl5.8/perl5.8/work/perl-5.8.9/Configure
:debug:patch euid/egid changed to: 502/502
:debug:patch Executing reinplace: /usr/bin/sed {s|\(libswanted=.*\)gdbm *\(.*\)|\1\2|} < /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_perl5.8/perl5.8/work/perl-5.8.9/Configure >@ file12
:debug:patch euid/egid changed to: 0/0
:debug:patch chowned /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_perl5.8/perl5.8/work/perl-5.8.9/Configure to macports
:debug:patch euid/egid changed to: 502/502
:debug:patch euid/egid changed to: 0/0
:debug:patch setting attributes on /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_perl5.8/perl5.8/work/perl-5.8.9/Configure
:debug:patch euid/egid changed to: 502/502
:debug:patch Executing reinplace: /usr/bin/sed {s|\(libswanted=.*\)db *\(.*\)|\1\2|} < /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_perl5.8/perl5.8/work/perl-5.8.9/Configure >@ file12
:debug:patch euid/egid changed to: 0/0
:debug:patch chowned /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_perl5.8/perl5.8/work/perl-5.8.9/Configure to macports
:debug:patch euid/egid changed to: 502/502
:debug:patch euid/egid changed to: 0/0
:debug:patch setting attributes on /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_perl5.8/perl5.8/work/perl-5.8.9/Configure
:debug:patch euid/egid changed to: 502/502
:debug:patch Privilege de-escalation not attempted as not running as root.
:debug:configure configure phase started at Mon Aug  6 11:36:18 NZST 2012
:notice:configure --->  Configuring perl5.8
:debug:configure Using compiler 'Mac OS X clang'
:debug:configure Executing org.macports.configure (perl5.8)
:debug:configure Environment: CPATH='/opt/local/include' CFLAGS='-pipe -O2 -arch x86_64' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-pipe -O2 -arch x86_64' LIBRARY_PATH='/opt/local/lib' MACOSX_DEPLOYMENT_TARGET='10.8' CXX='/usr/bin/clang++' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_perl5.8/perl5.8/work/.CC_PRINT_OPTIONS' F90FLAGS='-pipe -O2 -m64' LDFLAGS='-L/opt/local/lib -arch x86_64' FCFLAGS='-pipe -O2 -m64' OBJC='/usr/bin/clang' INSTALL='/usr/bin/install -c' OBJCFLAGS='-pipe -O2 -arch x86_64' FFLAGS='-pipe -O2 -m64' CC_PRINT_OPTIONS='YES' CC='/usr/bin/clang' LC_ALL='C'
:debug:configure Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_perl5.8/perl5.8/work/perl-5.8.9" && /bin/sh Configure -des -D prefix='/opt/local' -D scriptdir='/opt/local/bin' -D cppflags="${CPPFLAGS}" -D ccflags="${CFLAGS}" -D ldflags="${LDFLAGS}" -D vendorprefix='/opt/local' -D man1ext='1pm' -D man3ext='3pm' -D cc=${CC} -D ld=${CC} -Dusemultiplicity=y -Dusethreads -Duseshrplib -D man1dir='/opt/local/share/man/man1p' -D man3dir='/opt/local/share/man/man3p' -D sitebin='/opt/local/libexec/perl5.8/sitebin' -D siteman1dir='/opt/local/share/perl5.8/siteman/man1' -D siteman3dir='/opt/local/share/perl5.8/siteman/man3' -D vendorbin='/opt/local/libexec/perl5.8' -D vendorman1dir='/opt/local/share/perl5.8/man/man1' -D vendorman3dir='/opt/local/share/perl5.8/man/man3' -D perlpath="/opt/local/bin/perl5.8" -D startperl="#!/opt/local/bin/perl5.8" -D inc_version_list="5.8.8 5.8.8/darwin-thread-multi-2level" -U i_bind -U i_gdbm -U i_db'
:debug:configure Executing command line:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_perl5.8/perl5.8/work/perl-5.8.9" && /bin/sh Configure -des -D prefix='/opt/local' -D scriptdir='/opt/local/bin' -D cppflags="${CPPFLAGS}" -D ccflags="${CFLAGS}" -D ldflags="${LDFLAGS}" -D vendorprefix='/opt/local' -D man1ext='1pm' -D man3ext='3pm' -D cc=${CC} -D ld=${CC} -Dusemultiplicity=y -Dusethreads -Duseshrplib -D man1dir='/opt/local/share/man/man1p' -D man3dir='/opt/local/share/man/man3p' -D sitebin='/opt/local/libexec/perl5.8/sitebin' -D siteman1dir='/opt/local/share/perl5.8/siteman/man1' -D siteman3dir='/opt/local/share/perl5.8/siteman/man3' -D vendorbin='/opt/local/libexec/perl5.8' -D vendorman1dir='/opt/local/share/perl5.8/man/man1' -D vendorman3dir='/opt/local/share/perl5.8/man/man3' -D perlpath="/opt/local/bin/perl5.8" -D startperl="#!/opt/local/bin/perl5.8" -D inc_version_list="5.8.8 5.8.8/darwin-thread-multi-2level" -U i_bind -U i_gdbm -U i_db 
:info:configure grep: empty (sub)expression
:info:configure First let's make sure your kit is complete.  Checking...
:info:configure Locating common programs...
:info:configure Checking compatibility between /bin/echo and builtin echo (if any)...
:info:configure Symbolic links are supported.
:info:configure Checking how to test for symbolic links...
:info:configure You can test for symbolic links with 'test -h'.
:info:configure Good, your tr supports [:lower:] and [:upper:] to convert case.
:info:configure Using [:upper:] and [:lower:] to convert case.
:info:configure 3b1   		catamount   	dynixptx   	i386   		machten   	next_3   	qnx   		sunos_4_0   	unisysdynix   
:info:configure aix   		convexos   	epix   		interix   	machten_2   	next_3_0   	rhapsody   	sunos_4_1   	utekv   
:info:configure aix_3   	cxux   		esix4   	irix_4   	midnightbsd   	next_4   	riscos   	super-ux   	uts   
:info:configure aix_4   	cygwin   	fps   		irix_5   	mint   		nonstopux   	sco   		svr4   		uwin   
:info:configure altos486   	darwin   	freebsd   	irix_6   	mips   		openbsd   	sco_2_3_0   	svr5   		vmesa   
:info:configure amigaos   	dcosx   	genix   	irix_6_0   	mirbsd   	opus   		sco_2_3_1   	ti1500   	vos   
:info:configure apollo   	dec_osf   	gnu   		irix_6_1   	mpc   		os2   		sco_2_3_2   	titanos   
:info:configure atheos   	dgux   		gnukfreebsd   	isc   		mpeix   	os390   	sco_2_3_3   	ultrix_4   
:info:configure aux_3   	dos_djgpp   	gnuknetbsd   	isc_2   	ncr_tower   	os400   	sco_2_3_4   	umips   
:info:configure beos   		dragonfly   	greenhills   	linux   	netbsd   	posix-bc   	solaris_2   	unicos   
:info:configure bsdos   	dynix   	hpux   		lynxos   	newsos4   	powerux   	stellar   	unicosmk   
:info:configure Which of these apply, if any? [darwin]  
:info:configure Operating system name? [darwin]  
:info:configure Operating system version? [12.0.0]  
:info:configure Installation prefix to use? (~name ok) [/opt/local]  
:info:configure AFS does not seem to be running...
:info:configure What installation prefix should I use for installing files? (~name ok) [/opt/local]  
:info:configure Build Perl for SOCKS? [n]  
:info:configure Use the PerlIO abstraction layer? [y]  
:info:configure Getting the current patchlevel...
:info:configure Build a threading Perl? [y]  
:info:configure Use the newer interpreter-based ithreads? [y]  
:info:configure Use which C compiler? [/usr/bin/clang]  
:info:configure Checking for GNU cc in disguise and/or its version number...
:info:configure Now, how can we feed standard input to your C preprocessor...
:info:configure Directories to use for library searches? [/usr/local/lib /opt/local/lib /usr/lib]  
:info:configure What is the file extension used for shared libraries? [dylib]  
:info:configure Try to use long doubles if available? [n]  
:info:configure Checking for optional libraries...
:info:configure What libraries to use? [-ldbm -ldl -lm -lutil -lc]  
:info:configure What optimizer/debugger flag should be used? [-O3]  
:info:configure Any additional cc flags?
:info:configure [-pipe -O2 -arch x86_64 -fno-common -DPERL_DARWIN -I/opt/local/include -no-cpp-precomp -fno-strict-aliasing -I/usr/local/include -I/opt/local/include]  
:info:configure Let me guess what the preprocessor flags are...
:info:configure Any additional ld flags (NOT including libraries)? [-L/opt/local/lib -arch x86_64 -L/usr/local/lib]  
:info:configure Checking your choice of C compiler and flags for coherency...
:info:configure Computing filename position in cpp output for #include directives...
:info:configure <stdlib.h> found.
:info:configure Checking to see how big your integers are...
:info:configure Checking to see if you have long long...
:info:configure Checking to see how big your long longs are...
:info:configure <inttypes.h> found.
:info:configure Checking to see if you have int64_t...
:info:configure Checking which 64-bit integer type we could use...
:info:configure We could use 'long' for 64-bit integers.
:info:configure Try to use maximal 64-bit support, if available? [y]  
:info:configure Checking to see how big your double precision numbers are...
:info:configure Checking to see if you have long double...
:info:configure Checking to see how big your long doubles are...
:info:configure What is your architecture name [darwin]  
:info:configure Threads selected.
:info:configure ...setting architecture name to darwin-thread.
:info:configure Multiplicity selected.
:info:configure ...setting architecture name to darwin-thread-multi.
:info:configure This architecture is naturally 64-bit, not changing architecture name.
:info:configure Perlio selected.
:info:configure Pathname where the public executables will reside? (~name ok) [/opt/local/bin]  
:info:configure Use relocatable @INC? [n]  
:info:configure Pathname where the private library files will reside? (~name ok) [/opt/local/lib/perl5/5.8.9]  
:info:configure Where do you want to put the public architecture-dependent libraries? (~name ok) [/opt/local/lib/perl5/5.8.9/darwin-thread-multi-2level]  
:info:configure Other username to test security of setuid scripts with? [none]  
:info:configure I'll assume setuid scripts are *not* secure.
:info:configure Does your kernel have *secure* setuid scripts? [n]  
:info:configure Do you want to do setuid/setgid emulation? [n]  
:info:configure Installation prefix to use for add-on modules and utilities? (~name ok) [/opt/local]  
:info:configure Pathname for the site-specific library files? (~name ok) [/opt/local/lib/perl5/site_perl/5.8.9]  
:info:configure List of earlier versions to include in @INC? [5.8.8 5.8.8/darwin-thread-multi-2level]  
:info:configure <malloc.h> NOT found.
:info:configure Checking to see how well your C compiler groks the void type...
:info:configure Good.  It appears to support void to the level perl5 wants.
:info:configure Checking to see how big your pointers are...
:info:configure Do you wish to wrap malloc calls to protect against potential overflows? [y]  
:info:configure Do you wish to attempt to use the malloc that comes with perl5? [n]  
:info:configure Your system wants malloc to return 'void *', it would seem.
:info:configure Your system uses void free(), it would seem.
:info:configure Pathname for the site-specific architecture-dependent library files? (~name ok) [/opt/local/lib/perl5/site_perl/5.8.9/darwin-thread-multi-2level]  
:info:configure Do you want to configure vendor-specific add-on directories? [y]  
:info:configure Installation prefix to use for vendor-supplied add-ons? (~name ok) [/opt/local]  
:info:configure Pathname for the vendor-supplied library files? (~name ok) [/opt/local/lib/perl5/vendor_perl/5.8.9]  
:info:configure Pathname for vendor-supplied architecture-dependent files? (~name ok) [/opt/local/lib/perl5/vendor_perl/5.8.9/darwin-thread-multi-2level]  
:info:configure Colon-separated list of additional directories for perl to search? [none]  
:info:configure Checking out function prototypes...
:info:configure Install any extra modules (y or n)? [n]  
:info:configure Directory for the main Perl5 html pages? (~name ok) [none]  
:info:configure Directory for the Perl5 module html pages? (~name ok) [none]  
:info:configure Do you want to install perl as /usr/bin/perl? [n]  
:info:configure Checking for GNU C Library...
:info:configure Shall I use /opt/local/bin/nm to extract C symbols from the libraries? [y]  
:info:configure Where is your C library? [/usr/lib/libc.dylib]  
:info:configure Extracting names from the following files for later perusal:
:info:configure 	/usr/lib/libc.dylib
:info:configure 	/usr/lib/libdbm.dylib
:info:configure 	/usr/lib/libdl.dylib
:info:configure 	/usr/lib/libm.dylib
:info:configure 	/usr/lib/libutil.dylib
:info:configure This may take a while................../opt/local/bin/nm didn't seem to work right. Trying /opt/local/bin/ar instead...
:info:configure ar: /usr/lib/libc.dylib is a fat file (use libtool(1) or lipo(1) and ar(1) on it)
:info:configure ar: /usr/lib/libc.dylib: Inappropriate file type or format
:info:configure /opt/local/bin/ar didn't seem to work right.
:info:configure Maybe this is a Cray...trying bld instead...
:info:configure Configure: line 7575: bld: command not found
:info:configure Configure: line 7578: bld: command not found
:info:configure ar: /usr/lib/libdbm.dylib is a fat file (use libtool(1) or lipo(1) and ar(1) on it)
:info:configure ar: /usr/lib/libdbm.dylib: Inappropriate file type or format
:info:configure Configure: line 7578: bld: command not found
:info:configure ar: /usr/lib/libdl.dylib is a fat file (use libtool(1) or lipo(1) and ar(1) on it)
:info:configure ar: /usr/lib/libdl.dylib: Inappropriate file type or format
:info:configure Configure: line 7578: bld: command not found
:info:configure ar: /usr/lib/libm.dylib is a fat file (use libtool(1) or lipo(1) and ar(1) on it)
:info:configure ar: /usr/lib/libm.dylib: Inappropriate file type or format
:info:configure Configure: line 7578: bld: command not found
:info:configure ar: /usr/lib/libutil.dylib is a fat file (use libtool(1) or lipo(1) and ar(1) on it)
:info:configure ar: /usr/lib/libutil.dylib: Inappropriate file type or format
:info:configure Ok.
:info:configure <dld.h> NOT found.
:info:configure Checking for C++...
:info:configure dlopen() found.
:info:configure <unistd.h> found.
:info:configure Do you wish to use dynamic loading? [y]  
:info:configure Source file to use for dynamic loading [ext/DynaLoader/dl_dlopen.xs]  
:info:configure Any special flags to pass to /usr/bin/clang -c to compile shared library modules? [none]  
:info:configure What command should be used to create dynamic libraries? [env MACOSX_DEPLOYMENT_TARGET=10.3 /usr/bin/clang]  
:info:configure Any special flags to pass to env MACOSX_DEPLOYMENT_TARGET=10.3 /usr/bin/clang to create a dynamically loaded library?
:info:configure [-L/opt/local/lib -arch x86_64 -bundle -undefined dynamic_lookup -L/usr/local/lib]  
:info:configure Any special flags to pass to /usr/bin/clang to use dynamic linking? [none]  
:info:configure Build a shared libperl.dylib (y/n) [y]  
:info:configure What name do you want to give to the shared libperl? [libperl.dylib]  
:info:configure System manual is in /usr/share/man/man1.
:info:configure Where do the main Perl5 manual pages (source) go? (~name ok) [/opt/local/share/man/man1p]  
:info:configure What suffix should be used for the main Perl5 man pages? [1pm]  
:info:configure You can have filenames longer than 14 characters.
:info:configure Where do the perl5 library man pages (source) go? (~name ok) [/opt/local/share/man/man3p]  
:info:configure What suffix should be used for the perl5 library man pages? [3pm]  
:info:configure Figuring out host name...
:info:configure Your host name appears to be "unknown-c8-bc-c8-ee-0c-af.lan". Right? [y]  
:info:configure What is your domain name? [.lan]  
:info:configure What is your e-mail address? [normannlou@unknown-c8-bc-c8-ee-0c-af.lan]  
:info:configure Perl administrator e-mail address [normannlou@unknown-c8-bc-c8-ee-0c-af.lan]  
:info:configure Do you want to install only the version-specific parts of perl? [n]  
:info:configure Where do you keep publicly executable scripts? (~name ok) [/opt/local/bin]  
:info:configure Pathname where the add-on public executables should be installed? (~name ok) [/opt/local/libexec/perl5.8/sitebin]  
:info:configure Directory /opt/local/libexec/perl5.8/sitebin doesn't exist.  Use that name anyway? [y]  
:info:configure Pathname where the site-specific html pages should be installed? (~name ok) [none]  
:info:configure Pathname where the site-specific library html pages should be installed? (~name ok) [none]  
:info:configure Pathname where the site-specific manual pages should be installed? (~name ok) [/opt/local/share/perl5.8/siteman/man1]  
:info:configure Pathname where the site-specific library manual pages should be installed? (~name ok) [/opt/local/share/perl5.8/siteman/man3]  
:info:configure Pathname where add-on public executable scripts should be installed? (~name ok) [/opt/local/libexec/perl5.8/sitebin]  
:info:configure Use the "fast stdio" if available? [y]  
:info:configure off_t found.
:info:configure Checking to see how big your file offsets are...
:info:configure fpos_t found.
:info:configure Checking the size of fpos_t...
:info:configure Pathname for the vendor-supplied executables directory? (~name ok) [/opt/local/libexec/perl5.8]  
:info:configure Pathname for the vendor-supplied html pages? (~name ok) [none]  
:info:configure Pathname for the vendor-supplied html pages? (~name ok) [none]  
:info:configure Pathname for the vendor-supplied manual section 1 pages? (~name ok) [/opt/local/share/perl5.8/man/man1]  
:info:configure Pathname for the vendor-supplied manual section 3 pages? (~name ok) [/opt/local/share/perl5.8/man/man3]  
:info:configure Pathname for the vendor-supplied scripts directory? (~name ok) [/opt/local/libexec/perl5.8]  
:info:configure Using <string.h> instead of <strings.h>.
:info:configure qgcvt() NOT found.
:info:configure Checking how to print long doubles...
:info:configure gconvert NOT found.
:info:configure gcvt() found.
:info:configure sprintf() found.
:info:configure I'll use sprintf to convert floats into a string.
:info:configure fwalk() NOT found.
:info:configure access() NOT found.
:info:configure accessx() NOT found.
:info:configure aintl() NOT found.
:info:configure alarm() NOT found.
:info:configure <pthread.h> found.
:info:configure <sys/types.h> found.
:info:configure <sys/select.h> found.
:info:configure Testing to see if we should include <time.h>, <sys/time.h> or both.
:info:configure We'll include <sys/time.h>.
:info:configure Checking to see if your struct tm has tm_zone field...
:info:configure Checking to see if your struct tm has tm_gmtoff field...
:info:configure asctime_r() NOT found.
:info:configure atolf() NOT found.
:info:configure atoll() NOT found.
:info:configure Checking whether your compiler can handle __attribute__((format)) ...
:info:configure Checking whether your compiler allows __printf__ format to be null ...
:info:configure Checking whether your compiler can handle __attribute__((malloc)) ...
:info:configure Checking whether your compiler can handle __attribute__((nonnull(1))) ...
:info:configure Checking whether your compiler can handle __attribute__((noreturn)) ...
:info:configure Checking whether your compiler can handle __attribute__((pure)) ...
:info:configure Checking whether your compiler can handle __attribute__((unused)) ...
:info:configure Checking whether your compiler can handle __attribute__((warn_unused_result)) ...
:info:configure bcmp() NOT found.
:info:configure bcopy() NOT found.
:info:configure getpgrp() NOT found.
:info:configure setpgrp() NOT found.
:info:configure Checking whether your compiler can handle __builtin_choose_expr ...
:info:configure Checking whether your compiler can handle __builtin_expect ...
:info:configure bzero() NOT found.
:info:configure <stdarg.h> found.
:info:configure <varargs.h> found.
:info:configure We'll include <stdarg.h> to get va_dcl definition.
:info:configure You have <stdarg.h> and <stdlib.h>, so checking for C99 variadic macros.
:info:configure You have C99 variadic macros.
:info:configure You have void (*signal())().
:info:configure Checking whether your C compiler can cast large floats to int32.
:info:configure Checking whether your C compiler can cast negative float to unsigned.
:info:configure vprintf() NOT found.
:info:configure chown() NOT found.
:info:configure chroot() NOT found.
:info:configure chsize() NOT found.
:info:configure class() NOT found.
:info:configure clearenv() NOT found.
:info:configure Hmm... You don't have Berkeley networking in libc.a...
:info:configure or anywhere else I see.
:info:configure socketpair() NOT found.
:info:configure Checking the availability of certain socket constants...
:info:configure <sys/uio.h> found.
:info:configure Checking to see if your system supports struct cmsghdr...
:info:configure Checking to see if your C compiler knows about "const"...
:info:configure copysignl() NOT found.
:info:configure crypt() NOT found.
:info:configure crypt() NOT found.
:info:configure <crypt.h> NOT found.
:info:configure crypt_r() NOT found.
:info:configure ctermid() NOT found.
:info:configure ctermid_r() NOT found.
:info:configure ctime_r() NOT found.
:info:configure cuserid() NOT found.
:info:configure <limits.h> found.
:info:configure <float.h> found.
:info:configure DBL_DIG found.
:info:configure dbmclose() NOT found.
:info:configure difftime() NOT found.
:info:configure <dirent.h> found.
:info:configure Your directory entries are struct dirent.
:info:configure Good, your directory entry keeps length information in d_namlen.
:info:configure Checking to see if DIR has a dd_fd member variable
:info:configure <sys/dir.h> found.
:info:configure <sys/ndir.h> NOT found.
:info:configure dirfd() found.
:info:configure dlerror() found.
:info:configure <dlfcn.h> found.
:info:configure What is the extension of dynamically loaded modules [bundle]  
:info:configure Checking whether your dlsym() needs a leading underscore ...
:info:configure dlsym doesn't need a leading underscore.
:info:configure drand48_r() NOT found.
:info:configure dup2() NOT found.
:info:configure eaccess() NOT found.
:info:configure endgrent() NOT found.
:info:configure <grp.h> found.
:info:configure endgrent_r() NOT found.
:info:configure endhostent() NOT found.
:info:configure <netdb.h> found.
:info:configure endhostent_r() NOT found.
:info:configure endnetent() NOT found.
:info:configure endnetent_r() NOT found.
:info:configure endprotoent() NOT found.
:info:configure endprotoent_r() NOT found.
:info:configure endpwent() NOT found.
:info:configure <pwd.h> found.
:info:configure endpwent_r() NOT found.
:info:configure endservent() NOT found.
:info:configure endservent_r() NOT found.
:info:configure <sys/file.h> defines the O_* constants...
:info:configure and you have the 3 argument form of open().
:info:configure <sys/file.h> found.
:info:configure We'll be including <sys/file.h>.
:info:configure <fcntl.h> found.
:info:configure We don't need to include <fcntl.h> if we include <sys/file.h>.
:info:configure fork() NOT found.
:info:configure pipe() NOT found.
:info:configure Figuring out the flag used by open() for non-blocking I/O...
:info:configure Let's see what value errno gets from read() on a O_NONBLOCK file...
:info:configure Checking how std your stdio is...
:info:configure Checking to see what happens if we set the stdio ptr...
:info:configure Increasing ptr in your stdio leaves cnt unchanged.  Good.
:info:configure You seem to have 'fast stdio' to directly manipulate the stdio buffers.
:info:configure fchdir() NOT found.
:info:configure fchmod() NOT found.
:info:configure fchown() NOT found.
:info:configure fcntl() NOT found.
:info:configure Well, your system knows about the normal fd_set typedef...
:info:configure and you have the normal fd_set macros (just as I'd expect).
:info:configure fgetpos() NOT found.
:info:configure finite() NOT found.
:info:configure finitel() NOT found.
:info:configure flock() NOT found.
:info:configure fp_class() NOT found.
:info:configure pathconf() NOT found.
:info:configure fpathconf() NOT found.
:info:configure fpclass() NOT found.
:info:configure fpclassify() NOT found.
:info:configure fpclassl() NOT found.
:info:configure Checking to see if you have fpos64_t...
:info:configure frexpl() NOT found.
:info:configure <sys/param.h> found.
:info:configure <sys/mount.h> found.
:info:configure Checking to see if your system supports struct fs_data...
:info:configure fseeko() NOT found.
:info:configure fsetpos() NOT found.
:info:configure fstatfs() NOT found.
:info:configure statvfs() NOT found.
:info:configure fstatvfs() NOT found.
:info:configure fsync() NOT found.
:info:configure ftello() NOT found.
:info:configure Checking if you have a working futimes()
:info:configure Yes, you have
:info:configure getcwd() NOT found.
:info:configure getespwnam() NOT found.
:info:configure getfsstat() NOT found.
:info:configure getgrent() NOT found.
:info:configure getgrent_r() NOT found.
:info:configure getgrgid_r() NOT found.
:info:configure getgrnam_r() NOT found.
:info:configure gethostbyaddr() NOT found.
:info:configure gethostbyname() NOT found.
:info:configure gethostent() NOT found.
:info:configure I'll use 'popen("/bin/hostname", "r")' to get your hostname.
:info:configure gethostbyaddr_r() NOT found.
:info:configure gethostbyname_r() NOT found.
:info:configure gethostent_r() NOT found.
:info:configure getitimer() NOT found.
:info:configure getlogin() NOT found.
:info:configure getlogin_r() NOT found.
:info:configure getmnt() NOT found.
:info:configure getmntent() NOT found.
:info:configure getnetbyaddr() NOT found.
:info:configure getnetbyname() NOT found.
:info:configure getnetent() NOT found.
:info:configure getnetbyaddr_r() NOT found.
:info:configure getnetbyname_r() NOT found.
:info:configure getnetent_r() NOT found.
:info:configure getpagesize() NOT found.
:info:configure getprotobyname() NOT found.
:info:configure getprotobynumber() NOT found.
:info:configure getprotoent() NOT found.
:info:configure getpgid() NOT found.
:info:configure getpgrp2() NOT found.
:info:configure getppid() NOT found.
:info:configure getpriority() NOT found.
:info:configure getprotobyname_r() NOT found.
:info:configure getprotobynumber_r() NOT found.
:info:configure getprotoent_r() NOT found.
:info:configure getprpwnam() NOT found.
:info:configure getpwent() NOT found.
:info:configure getpwent_r() NOT found.
:info:configure getpwnam_r() NOT found.
:info:configure getpwuid_r() NOT found.
:info:configure getservbyname() NOT found.
:info:configure getservbyport() NOT found.
:info:configure getservent() NOT found.
:info:configure getservbyname_r() NOT found.
:info:configure getservbyport_r() NOT found.
:info:configure getservent_r() NOT found.
:info:configure getspnam() NOT found.
:info:configure <shadow.h> NOT found.
:info:configure getspnam_r() NOT found.
:info:configure gettimeofday() NOT found.
:info:configure ftime() NOT found.
:info:configure No ftime() nor gettimeofday() -- timing may be less accurate.
:info:configure gmtime_r() NOT found.
:info:configure hasmntopt() NOT found.
:info:configure <netinet/in.h> found.
:info:configure <arpa/inet.h> found.
:info:configure htonl() NOT found.
:info:configure But it seems to be defined as a macro.
:info:configure ilogbl() NOT found.
:info:configure No index() or strchr() found!
:info:configure inet_aton() NOT found.
:info:configure isascii() found.
:info:configure isfinite() NOT found.
:info:configure isinf() NOT found.
:info:configure isnan() NOT found.
:info:configure isnanl() NOT found.
:info:configure killpg() NOT found.
:info:configure lchown() found.
:info:configure LDBL_DIG found.
:info:configure <math.h> found.
:info:configure Checking to see if your libm supports _LIB_VERSION...
:info:configure No, it does not (probably harmless)
:info:configure link() NOT found.
:info:configure localtime_r() NOT found.
:info:configure localeconv() NOT found.
:info:configure lockf() NOT found.
:info:configure lstat() NOT found.
:info:configure madvise() NOT found.
:info:configure malloc_size() NOT found.
:info:configure malloc_good_size() NOT found.
:info:configure mblen() NOT found.
:info:configure mbstowcs() NOT found.
:info:configure mbtowc() NOT found.
:info:configure memchr() NOT found.
:info:configure memcmp() NOT found.
:info:configure memcpy() NOT found.
:info:configure memmove() NOT found.
:info:configure memset() NOT found.
:info:configure mkdir() NOT found.
:info:configure mkdtemp() NOT found.
:info:configure mkfifo() NOT found.
:info:configure mkstemp() NOT found.
:info:configure mkstemps() NOT found.
:info:configure mktime() NOT found.
:info:configure <sys/mman.h> found.
:info:configure mmap() NOT found.
:info:configure sqrtl() NOT found.
:info:configure scalbnl() NOT found.
:info:configure modfl() NOT found.
:info:configure mprotect() NOT found.
:info:configure msgctl() NOT found.
:info:configure msgget() NOT found.
:info:configure msgsnd() NOT found.
:info:configure msgrcv() NOT found.
:info:configure You don't have the full msg*(2) library.
:info:configure Checking to see if your system supports struct msghdr...
:info:configure msync() NOT found.
:info:configure munmap() NOT found.
:info:configure nice() NOT found.
:info:configure <langinfo.h> found.
:info:configure nl_langinfo() NOT found.
:info:configure Checking to see if your C compiler knows about "volatile"...
:info:configure Choosing the C types to be used for Perl's internal types...
:info:configure Checking how many bits of your UVs your NVs can preserve...
:info:configure Checking whether NV 0.0 is all bits zero in memory...
:info:configure 0.0 is represented as all bits zero in memory
:info:configure Checking to see if you have off64_t...
:info:configure Checking what constant to use for creating joinable pthreads...
:info:configure You seem to use PTHREAD_CREATE_JOINABLE.
:info:configure pause() NOT found.
:info:configure poll() NOT found.
:info:configure readlink() NOT found.
:info:configure vfork() NOT found.
:info:configure pthread_atfork found.
:info:configure pthread_attr_setscope() NOT found.
:info:configure sched_yield() found.
:info:configure pthread_yield() NOT found.
:info:configure random_r() NOT found.
:info:configure readdir() NOT found.
:info:configure seekdir() NOT found.
:info:configure telldir() NOT found.
:info:configure rewinddir() NOT found.
:info:configure readdir64_r() NOT found.
:info:configure readdir_r() NOT found.
:info:configure readv() NOT found.
:info:configure recvmsg() NOT found.
:info:configure rename() NOT found.
:info:configure rmdir() NOT found.
:info:configure <memory.h> found.
:info:configure select() NOT found.
:info:configure semctl() NOT found.
:info:configure semget() NOT found.
:info:configure semop() NOT found.
:info:configure You don't have the full sem*(2) library.
:info:configure You have union semun in <sys/sem.h>.
:info:configure sendmsg() NOT found.
:info:configure setegid() NOT found.
:info:configure seteuid() NOT found.
:info:configure setgrent() NOT found.
:info:configure setgrent_r() NOT found.
:info:configure sethostent() NOT found.
:info:configure sethostent_r() NOT found.
:info:configure setitimer() NOT found.
:info:configure setlinebuf() NOT found.
:info:configure setlocale() NOT found.
:info:configure <locale.h> found.
:info:configure setlocale_r() NOT found.
:info:configure setnetent() NOT found.
:info:configure setnetent_r() NOT found.
:info:configure setprotoent() NOT found.
:info:configure setpgid() NOT found.
:info:configure setpgrp2() NOT found.
:info:configure setpriority() NOT found.
:info:configure setproctitle() NOT found.
:info:configure setprotoent_r() NOT found.
:info:configure setpwent() NOT found.
:info:configure setpwent_r() NOT found.
:info:configure setregid() NOT found.
:info:configure setresgid() NOT found.
:info:configure setreuid() NOT found.
:info:configure setresuid() NOT found.
:info:configure setrgid() NOT found.
:info:configure setruid() NOT found.
:info:configure setservent() NOT found.
:info:configure setservent_r() NOT found.
:info:configure setsid() NOT found.
:info:configure setvbuf() NOT found.
:info:configure <sfio.h> NOT found.
:info:configure shmctl() NOT found.
:info:configure shmget() NOT found.
:info:configure shmat() NOT found.
:info:configure shmdt() NOT found.
:info:configure You don't have the full shm*(2) library.
:info:configure sigaction NOT found.
:info:configure <sunmath.h> NOT found.
:info:configure Checking to see if you have signbit() available to work on double... Yes.
:info:configure sigprocmask() NOT found.
:info:configure POSIX sigsetjmp found.
:info:configure snprintf() NOT found.
:info:configure vsnprintf() NOT found.
:info:configure sockatmark() NOT found.
:info:configure socks5_init() NOT found.
:info:configure Checking whether sprintf returns the length of the string...
:info:configure sprintf returns the length of the string (as ANSI says it should)
:info:configure srand48_r() NOT found.
:info:configure srandom_r() NOT found.
:info:configure <sys/stat.h> found.
:info:configure Checking to see if your struct stat has st_blocks field...
:info:configure <sys/vfs.h> NOT found.
:info:configure <sys/statfs.h> NOT found.
:info:configure Checking to see if your system supports struct statfs...
:info:configure Checking to see if your struct statfs has f_flags field...
:info:configure Checking how to access stdio streams by file descriptor number...
:info:configure I can't figure out how to access stdio streams by file descriptor number.
:info:configure strcoll() NOT found.
:info:configure Checking to see if your C compiler can copy structs...
:info:configure strerror() and sys_errlist[] NOT found.
:info:configure strerror_r() NOT found.
:info:configure strftime() NOT found.
:info:configure strlcat() NOT found.
:info:configure strlcpy() NOT found.
:info:configure strtod() NOT found.
:info:configure strtol() NOT found.
:info:configure strtold() NOT found.
:info:configure strtoll() NOT found.
:info:configure strtoq() NOT found.
:info:configure strtoul() NOT found.
:info:configure strtoull() NOT found.
:info:configure strtouq() NOT found.
:info:configure strxfrm() NOT found.
:info:configure symlink() NOT found.
:info:configure syscall() NOT found.
:info:configure sysconf() NOT found.
:info:configure system() NOT found.
:info:configure tcgetpgrp() NOT found.
:info:configure tcsetpgrp() NOT found.
:info:configure time() not found, hope that will do.
:info:configure <sys/times.h> found.
:info:configure times() NOT found, hope that will do.
:info:configure tmpnam_r() NOT found.
:info:configure truncate() NOT found.
:info:configure ttyname_r() NOT found.
:info:configure tzname[] NOT found.
:info:configure (Testing for character data alignment may crash the test.  That's okay.)
:info:configure It seems that you must access character data in an aligned manner.
:info:configure ualarm() NOT found.
:info:configure umask() NOT found.
:info:configure unordered() NOT found.
:info:configure unsetenv() NOT found.
:info:configure usleep() NOT found.
:info:configure ustat() NOT found.
:info:configure closedir() NOT found.
:info:configure wait4() NOT found.
:info:configure waitpid() NOT found.
:info:configure wcstombs() NOT found.
:info:configure wctomb() NOT found.
:info:configure writev() NOT found.
:info:configure Checking to see how your cpp does stuff like concatenate tokens...
:info:configure Oh!  Smells like ANSI's been here.
:info:configure <db.h> found.
:info:configure Hmm.  Based on the hints in hints/darwin.sh, 
:info:configure the recommended value for $i_db on this machine was "undef"!
:info:configure     Keep the recommended value? [y]  
:info:configure Looking for a random number function...
:info:configure Yick, looks like I have to use rand().
:info:configure Use which function to generate random numbers? [rand]  
:info:configure I cannot find function rand. Use that name anyway? [y]  
:info:configure Checking to see how many bits your rand() function produces...
:info:configure How many bits does your rand() function produce? [31]  
:info:configure Determining whether or not we are on an EBCDIC system...
:info:configure Nope, no EBCDIC, probably ASCII or some ISO Latin. Or UTF-8.
:info:configure Checking how to flush all pending stdio output...
:info:configure Your fflush(NULL) works okay for output streams.
:info:configure Let's see if it clobbers input pipes...
:info:configure fflush(NULL) seems to behave okay with input streams.
:info:configure Checking the size of gid_t...
:info:configure Checking the sign of gid_t...
:info:configure Checking how to print 64-bit integers...
:info:configure Checking the format strings to be used for Perl's internal types...
:info:configure Checking the format string to be used for gids...
:info:configure getgroups() NOT found.
:info:configure setgroups() NOT found.
:info:configure Checking if your /usr/bin/make program sets $(MAKE)...
:info:configure mode_t found.
:info:configure It seems that va_copy() or similar will be needed.
:info:configure size_t found.
:info:configure What pager is used on your system? [/usr/bin/less]  
:info:configure pid_t found.
:info:configure Checking how to generate random libraries on your machine...
:info:configure Generating a list of signal names and numbers...
:info:configure Checking the size of size_t...
:info:configure Checking to see if you have socklen_t...
:info:configure <socks.h> NOT found.
:info:configure I'll be using ssize_t for functions returning a byte count.
:info:configure Your stdio uses signed chars.
:info:configure Checking the size of uid_t...
:info:configure Checking the sign of uid_t...
:info:configure Checking the format string to be used for uids...
:info:configure Which compiler compiler (yacc or bison -y) shall I use? [yacc]  
:info:configure <fp.h> NOT found.
:info:configure <fp_class.h> NOT found.
:info:configure <gdbm.h> found.
:info:configure gdbm_open() NOT found.
:info:configure <ieeefp.h> NOT found.
:info:configure <libutil.h> NOT found.
:info:configure <mach/cthreads.h> NOT found.
:info:configure <mntent.h> NOT found.
:info:configure <ndbm.h> found.
:info:configure dbm_open() NOT found.
:info:configure <net/errno.h> NOT found.
:info:configure <netinet/tcp.h> found.
:info:configure <poll.h> found.
:info:configure Hmm.  Based on the hints in hints/darwin.sh, 
:info:configure the recommended value for $i_poll on this machine was "undef"!
:info:configure     Keep the recommended value? [y]  
:info:configure <prot.h> NOT found.
:info:configure Guessing which symbols your C compiler and preprocessor define...
:info:configure tcsetattr() NOT found.
:info:configure <sgtty.h> found.
:info:configure <stddef.h> found.
:info:configure <sys/access.h> NOT found.
:info:configure <sys/filio.h> found.
:info:configure <sys/ioctl.h> found.
:info:configure You have socket ioctls defined in <sys/sockio.h>.
:info:configure <syslog.h> found.
:info:configure <sys/mode.h> NOT found.
:info:configure <sys/resource.h> found.
:info:configure <sys/security.h> NOT found.
:info:configure <sys/statvfs.h> found.
:info:configure <sys/un.h> found.
:info:configure <sys/utsname.h> found.
:info:configure <sys/wait.h> found.
:info:configure <ustat.h> NOT found.
:info:configure <utime.h> found.
:info:configure <values.h> NOT found.
:info:configure Looking for extensions...
:info:configure What extensions do you wish to load dynamically?
:info:configure [B ByteLoader Cwd Data/Dumper Devel/DProf Devel/PPPort Devel/Peek Digest/MD5 Encode Fcntl File/Glob Filter/Util/Call Hash/Util IO List/Util MIME/Base64 Opcode POSIX PerlIO/encoding PerlIO/scalar PerlIO/via SDBM_File Storable Sys/Hostname Text/Soundex Time/HiRes Unicode/Normalize XS/APItest XS/Typemap attrs re threads threads/shared]  
:info:configure What extensions do you wish to load statically? [none]  
:info:configure Stripping down executable paths...
:info:configure Creating config.sh...
:info:configure Doing variable substitutions on .SH files...
:info:configure Extracting config.h (with variable substitutions)
:info:configure Extracting cflags (with variable substitutions)
:info:configure Not re-extracting config.h
:info:configure Extracting makeaperl (with variable substitutions)
:info:configure Extracting makedepend (with variable substitutions)
:info:configure Extracting makedir (with variable substitutions)
:info:configure Extracting Makefile (with variable substitutions)
:info:configure Extracting myconfig (with variable substitutions)
:info:configure Extracting pod/Makefile (with variable substitutions)
:info:configure Extracting Policy.sh (with variable substitutions)
:info:configure Extracting utils/Makefile (with variable substitutions)
:info:configure Extracting writemain (with variable substitutions)
:info:configure Extracting x2p/cflags (with variable substitutions)
:info:configure Extracting x2p/Makefile (with variable substitutions)
:info:configure Run make depend now? [y]  
:info:configure sh ./makedepend MAKE=make
:info:configure sh writemain DynaLoader.o  > perlmain.c
:info:configure rm -f opmini.c
:info:configure cp op.c opmini.c
:info:configure echo  av.c scope.c op.c doop.c doio.c dump.c hv.c mg.c reentr.c perl.c perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c utf8.c gv.c sv.c taint.c toke.c util.c deb.c run.c universal.c xsutils.c pad.c globals.c perlio.c perlapi.c numeric.c mathoms.c locale.c pp_pack.c pp_sort.c miniperlmain.c perlmain.c opmini.c | tr ' ' '\n' >.clist
:info:configure Finding dependencies for av.o.
:info:configure Finding dependencies for scope.o.
:info:configure Finding dependencies for op.o.
:info:configure Finding dependencies for doop.o.
:info:configure Finding dependencies for doio.o.
:info:configure Finding dependencies for dump.o.
:info:configure Finding dependencies for hv.o.
:info:configure Finding dependencies for mg.o.
:info:configure Finding dependencies for reentr.o.
:info:configure Finding dependencies for perl.o.
:info:configure Finding dependencies for perly.o.
:info:configure Finding dependencies for pp.o.
:info:configure Finding dependencies for pp_hot.o.
:info:configure Finding dependencies for pp_ctl.o.
:info:configure Finding dependencies for pp_sys.o.
:info:configure Finding dependencies for regcomp.o.
:info:configure Finding dependencies for regexec.o.
:info:configure Finding dependencies for utf8.o.
:info:configure Finding dependencies for gv.o.
:info:configure Finding dependencies for sv.o.
:info:configure Finding dependencies for taint.o.
:info:configure Finding dependencies for toke.o.
:info:configure Finding dependencies for util.o.
:info:configure Finding dependencies for deb.o.
:info:configure Finding dependencies for run.o.
:info:configure Finding dependencies for universal.o.
:info:configure Finding dependencies for xsutils.o.
:info:configure Finding dependencies for pad.o.
:info:configure Finding dependencies for globals.o.
:info:configure Finding dependencies for perlio.o.
:info:configure Finding dependencies for perlapi.o.
:info:configure Finding dependencies for numeric.o.
:info:configure Finding dependencies for mathoms.o.
:info:configure Finding dependencies for locale.o.
:info:configure Finding dependencies for pp_pack.o.
:info:configure Finding dependencies for pp_sort.o.
:info:configure Finding dependencies for miniperlmain.o.
:info:configure Finding dependencies for perlmain.o.
:info:configure Finding dependencies for opmini.o.
:info:configure echo Makefile.SH cflags.SH config_h.SH makeaperl.SH makedepend.SH makedir.SH myconfig.SH writemain.SH pod/Makefile.SH | tr ' ' '\n' >.shlist
:info:configure Updating GNUmakefile...
:info:configure test -s perlmain.c && touch perlmain.c
:info:configure cd x2p; make depend
:info:configure sh ../makedepend MAKE=make
:info:configure echo hash.c  str.c util.c walk.c | tr ' ' '\n' >.clist
:info:configure Finding dependencies for hash.o.
:info:configure Finding dependencies for str.o.
:info:configure Finding dependencies for util.o.
:info:configure Finding dependencies for walk.o.
:info:configure echo Makefile.SH cflags.SH | tr ' ' '\n' >.shlist
:info:configure Updating GNUmakefile...
:info:configure Now you must run 'make'.
:info:configure 
:info:configure If you compile perl5 on a different machine or from a different object
:info:configure directory, copy the Policy.sh file from this object directory to the
:info:configure new one before you run Configure -- this will help you with most of
:info:configure the policy defaults.
:info:configure 
:debug:configure Privilege de-escalation not attempted as not running as root.
:debug:build build phase started at Mon Aug  6 11:36:50 NZST 2012
:notice:build --->  Building perl5.8
:debug:build Executing org.macports.build (perl5.8)
:debug:build Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_perl5.8/perl5.8/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.8'
:debug:build Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_perl5.8/perl5.8/work/perl-5.8.9" && /usr/bin/make -j4 -w all'
:debug:build Executing command line:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_perl5.8/perl5.8/work/perl-5.8.9" && /usr/bin/make -j4 -w all 
:info:build make: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_perl5.8/perl5.8/work/perl-5.8.9'
:info:build `sh  cflags "optimize='-O3'" miniperlmain.o`  miniperlmain.c
:info:build `sh  cflags "optimize='-O3'" gv.o`  gv.c
:info:build `sh  cflags "optimize='-O3'" toke.o`  toke.c
:info:build `sh  cflags "optimize='-O3'" perly.o`  perly.c
:info:build 	  CCCMD =  /usr/bin/clang -DPERL_CORE -c -pipe -O2 -arch x86_64 -fno-common -DPERL_DARWIN -I/opt/local/include -no-cpp-precomp -fno-strict-aliasing -I/usr/local/include -I/opt/local/include  -std=c89 -O3  -Wall -ansi -pedantic -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -DPERL_GCC_PEDANTIC 
:info:build 	  CCCMD =  /usr/bin/clang -DPERL_CORE -c -pipe -O2 -arch x86_64 -fno-common -DPERL_DARWIN -I/opt/local/include -no-cpp-precomp -fno-strict-aliasing -I/usr/local/include -I/opt/local/include  -std=c89 -O3  -Wall -ansi -pedantic -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -DPERL_GCC_PEDANTIC 
:info:build 	  CCCMD =  /usr/bin/clang -DPERL_CORE -c -pipe -O2 -arch x86_64 -fno-common -DPERL_DARWIN -I/opt/local/include -no-cpp-precomp -fno-strict-aliasing -I/usr/local/include -I/opt/local/include  -std=c89 -O3  -Wall -ansi -pedantic -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -DPERL_GCC_PEDANTIC 
:info:build 	  CCCMD =  /usr/bin/clang -DPERL_CORE -c -pipe -O2 -arch x86_64 -fno-common -DPERL_DARWIN -I/opt/local/include -no-cpp-precomp -fno-strict-aliasing -I/usr/local/include -I/opt/local/include  -std=c89 -O3  -Wall -ansi -pedantic -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -DPERL_GCC_PEDANTIC 
:info:build `sh  cflags "optimize='-O3'" op.o`  op.c
:info:build toke.c:1997:26: warning: 'long long' is an extension when C99 mode is not enabled [-pedantic,-Wlong-long]
:info:build             const STRLEN need = UNISKIP(NATIVE_TO_UNI(nextuv));
:info:build                                 ^
:info:build ./utf8.h:138:30: note: expanded from macro 'UNISKIP'
:info:build                       (uv) < UTF8_QUAD_MAX ? 7 : 13 )
:info:build                              ^
:info:build ./utf8.h:232:36: note: expanded from macro 'UTF8_QUAD_MAX'
:info:build #    define UTF8_QUAD_MAX       UINT64_C(0x1000000000)
:info:build                                          ^
:info:build /usr/include/stdint.h:248:23: note: expanded from macro 'UINT64_C'
:info:build #define UINT64_C(v)  (v ## ULL)
:info:build                       ^
:info:build <scratch space>:72:1: note: expanded from macro '0x1000000000'
:info:build 0x1000000000ULL
:info:build ^
:info:build 	  CCCMD =  /usr/bin/clang -DPERL_CORE -c -pipe -O2 -arch x86_64 -fno-common -DPERL_DARWIN -I/opt/local/include -no-cpp-precomp -fno-strict-aliasing -I/usr/local/include -I/opt/local/include  -std=c89 -O3  -Wall -ansi -pedantic -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -DPERL_GCC_PEDANTIC 
:info:build toke.c:5516:11: error: address expression must be an lvalue or a function designator
:info:build                     if (memchr(tmpbuf, ':', len))
:info:build                         ^~~~~~~~~~~~~~~~~~~~~~~~
:info:build ./perl.h:988:67: note: expanded from macro 'memchr'
:info:build #       define memchr(s,c,n) ninstr((char*)(s), ((char*)(s)) + n, &(c), &(c) + 1)
:info:build                                                                   ^
:info:build ./embed.h:2749:48: note: expanded from macro 'ninstr'
:info:build #define ninstr(a,b,c,d)         Perl_ninstr(aTHX_ a,b,c,d)
:info:build                                                       ^
:info:build toke.c:5755:49: error: address expression must be an lvalue or a function designator
:info:build     const char *const has_colon = (const char*) memchr (PL_tokenbuf, ':', tokenbuf_len);
:info:build                                                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
:info:build ./perl.h:988:67: note: expanded from macro 'memchr'
:info:build #       define memchr(s,c,n) ninstr((char*)(s), ((char*)(s)) + n, &(c), &(c) + 1)
:info:build                                                                   ^
:info:build ./embed.h:2749:48: note: expanded from macro 'ninstr'
:info:build #define ninstr(a,b,c,d)         Perl_ninstr(aTHX_ a,b,c,d)
:info:build                                                       ^
:info:build toke.c:9785:44: error: invalid operands to binary expression ('char *' and 'char *')
:info:build     if ( outer || !(found_newline = (char*)memchr((void*)s, '\n', PL_bufend - s)) ) {
:info:build                                            ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
:info:build ./perl.h:988:62: note: expanded from macro 'memchr'
:info:build #       define memchr(s,c,n) ninstr((char*)(s), ((char*)(s)) + n, &(c), &(c) + 1)
:info:build                                                              ^
:info:build ./embed.h:2749:46: note: expanded from macro 'ninstr'
:info:build #define ninstr(a,b,c,d)         Perl_ninstr(aTHX_ a,b,c,d)
:info:build                                                     ^
:info:build toke.c:10814:21: error: invalid operands to binary expression ('char *' and 'char *')
:info:build             eol = (char *) memchr(s,'\n',PL_bufend-s);
:info:build                            ^~~~~~~~~~~~~~~~~~~~~~~~~~
:info:build ./perl.h:988:62: note: expanded from macro 'memchr'
:info:build #       define memchr(s,c,n) ninstr((char*)(s), ((char*)(s)) + n, &(c), &(c) + 1)
:info:build                                                              ^
:info:build ./embed.h:2749:46: note: expanded from macro 'ninstr'
:info:build #define ninstr(a,b,c,d)         Perl_ninstr(aTHX_ a,b,c,d)
:info:build                                                     ^
:info:build 1 warning and 4 errors generated.
:info:build make: *** [toke.o] Error 1
:info:build make: *** Waiting for unfinished jobs....
:info:build op.c:2722:9: warning: 'long long' is an extension when C99 mode is not enabled [-pedantic,-Wlong-long]
:info:build                              UNISKIP(tfirst) < UNISKIP(rfirst + diff));
:info:build                              ^
:info:build ./utf8.h:138:30: note: expanded from macro 'UNISKIP'
:info:build                       (uv) < UTF8_QUAD_MAX ? 7 : 13 )
:info:build                              ^
:info:build ./utf8.h:232:36: note: expanded from macro 'UTF8_QUAD_MAX'
:info:build #    define UTF8_QUAD_MAX       UINT64_C(0x1000000000)
:info:build                                          ^
:info:build /usr/include/stdint.h:248:23: note: expanded from macro 'UINT64_C'
:info:build #define UINT64_C(v)  (v ## ULL)
:info:build                       ^
:info:build <scratch space>:80:1: note: expanded from macro '0x1000000000'
:info:build 0x1000000000ULL
:info:build ^
:info:build op.c:2722:27: warning: 'long long' is an extension when C99 mode is not enabled [-pedantic,-Wlong-long]
:info:build                              UNISKIP(tfirst) < UNISKIP(rfirst + diff));
:info:build                                                ^
:info:build ./utf8.h:138:30: note: expanded from macro 'UNISKIP'
:info:build                       (uv) < UTF8_QUAD_MAX ? 7 : 13 )
:info:build                              ^
:info:build ./utf8.h:232:36: note: expanded from macro 'UTF8_QUAD_MAX'
:info:build #    define UTF8_QUAD_MAX       UINT64_C(0x1000000000)
:info:build                                          ^
:info:build /usr/include/stdint.h:248:23: note: expanded from macro 'UINT64_C'
:info:build #define UINT64_C(v)  (v ## ULL)
:info:build                       ^
:info:build <scratch space>:80:1: note: expanded from macro '0x1000000000'
:info:build 0x1000000000ULL
:info:build ^
:info:build op.c:6884:4: warning: expression result unused [-Wunused-value]
:info:build                         GvAVn(gv);
:info:build                         ^~~~~~~~~
:info:build ./gv.h:72:15: note: expanded from macro 'GvAVn'
:info:build                          GvGP(gv)->gp_av : \
:info:build                                    ^~~~~
:info:build 3 warnings generated.
:info:build make: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_perl5.8/perl5.8/work/perl-5.8.9'
:info:build Command failed:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_perl5.8/perl5.8/work/perl-5.8.9" && /usr/bin/make -j4 -w all 
:info:build Exit code: 2
:error:build org.macports.build for port perl5.8 returned: command execution failed
:debug:build Error code: CHILDSTATUS 87185 2
:debug:build Backtrace: command execution failed
    while executing
"system -nice 0 $fullcmdstring"
    ("eval" body line 1)
    invoked from within
"eval system $notty $nice \$fullcmdstring"
    invoked from within
"command_exec build"
    (procedure "portbuild::build_main" line 8)
    invoked from within
"$procedure $targetname"
:info:build Warning: targets not executed for perl5.8: org.macports.install org.macports.build org.macports.destroot
:notice:build Please see the log file for port perl5.8 for details:
    /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_perl5.8/perl5.8/main.log

Attachments (1)

main.log (60.7 KB) - added by normann@… 12 years ago.

Download all attachments as: .zip

Change History (7)

Changed 12 years ago by normann@…

Attachment: main.log added

comment:1 Changed 12 years ago by normann@…

Cc: normann@… added

Cc Me!

comment:2 Changed 12 years ago by ryandesign (Ryan Carsten Schmidt)

Cc: normann@… removed
Description: modified (diff)
Keywords: mountainlion clang added; perl5.8 perl-5.8.9 "CHILDSTATUS 87185" removed
Owner: changed from macports-tickets@… to ricci@…
Port: perl5.8 added
Priority: HighNormal
Summary: error on building perl5.8perl5.8: error: address expression must be an lvalue or a function designator

Confirmed on Mountain Lion. As a workaround, you could try using a different compiler.

comment:3 Changed 12 years ago by normann@…

alternatively used compiler llvm-gcc-4.2 as suggested, still doesn't work. The tried compiler apple-gcc-4.2, no luck either. So frustrating on this.

BTW, my Xcode version is 4.4.

comment:4 Changed 12 years ago by whcordis@…

Also can confirm that this still happens with Xcode 4.4.1 including the updated command line tools.

comment:5 Changed 12 years ago by whcordis@…

Cc: whcordis@… added

Cc Me!

comment:6 Changed 12 years ago by ryandesign (Ryan Carsten Schmidt)

Cc: cal@… added
Resolution: fixed
Status: newclosed
Note: See TracTickets for help on using tickets.