poppler build failed

[lord@…]

prosody /Users/lord# port upgrade poppler
--->  Computing dependencies for poppler
Error: reinplace: couldn't read file "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.24.2/configure": no such file or directory
Error: org.macports.patch for port poppler returned: reinplace sed(1) failed
Please see the log file for port poppler for details:
    /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/main.log
Error: Unable to upgrade port: 1
To report a bug, follow the instructions in the guide:
    http://guide.macports.org/#project.tickets

Tried selfupdate, clean, etc. Log file attached.

[lord@…]

Log file

[dbevans (David B. Evans)]

I'm not sure what's going on from what you've provided, but it appears that after the extract phase, the file configure does not exist in build directory indicating that for the some reason the extract phase failed (bad fetch, corrupted distfile, failed extract or something else).

Please do the following:

$ sudo port clean --all poppler
--->  Cleaning poppler
$ sudo port extract poppler
--->  Computing dependencies for poppler
--->  Fetching distfiles for poppler
--->  Attempting to fetch poppler-0.24.2.tar.xz from http://distfiles.macports.org/poppler
--->  Verifying checksums for poppler
--->  Extracting poppler
$ cd `port work poppler`/poppler*
$ ls
AUTHORS					config.h.cmake				poppler					poppler-qt5.pc.in
CMakeLists.txt				config.h.in				poppler-cairo-uninstalled.pc.in		poppler-splash-uninstalled.pc.in
COPYING					config.sub				poppler-cairo.pc.cmake			poppler-splash.pc.cmake
ChangeLog				configure				poppler-cairo.pc.in			poppler-splash.pc.in
ConfigureChecks.cmake			configure.ac				poppler-cpp-uninstalled.pc.in		poppler-uninstalled.pc.in
INSTALL					cpp					poppler-cpp.pc.cmake			poppler.pc.cmake
Makefile.am				depcomp					poppler-cpp.pc.in			poppler.pc.in
Makefile.in				fofi					poppler-glib-uninstalled.pc.in		qt4
NEWS					glib					poppler-glib.pc.cmake			qt5
README					goo					poppler-glib.pc.in			splash
README-XPDF				gtk-doc.make				poppler-qt4-uninstalled.pc.in		test
TODO					install-sh				poppler-qt4.pc.cmake			test-driver
aclocal.m4				ltmain.sh				poppler-qt4.pc.in			utils
cmake					m4					poppler-qt5-uninstalled.pc.in
config.guess				missing					poppler-qt5.pc.cmake

You should see the top level build directory of the distribution (including configure). If so, you should be able to proceed with the build. If not, let me know what you find.

[lord@…]

I followed your steps. Here is the trascript:

prosody /Users/lord#  port clean --all poppler
--->  Cleaning poppler
prosody /Users/lord# port extract poppler
--->  Computing dependencies for poppler
--->  Fetching distfiles for poppler
--->  Attempting to fetch poppler-0.24.2.tar.xz from http://distfiles.macports.org/poppler
--->  Verifying checksums for poppler
--->  Extracting poppler
prosody /Users/lord# cd `port work poppler`/poppler*
prosody /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.24.2# ls
AUTHORS                          cpp                              poppler-qt4-uninstalled.pc.in
CMakeLists.txt                   depcomp                          poppler-qt4.pc.cmake
COPYING                          fofi                             poppler-qt4.pc.in
ChangeLog                        glib                             poppler-qt5-uninstalled.pc.in
ConfigureChecks.cmake            goo                              poppler-qt5.pc.cmake
INSTALL                          gtk-doc.make                     poppler-qt5.pc.in
Makefile.am                      install-sh                       poppler-splash-uninstalled.pc.in
Makefile.in                      ltmain.sh                        poppler-splash.pc.cmake
NEWS                             m4                               poppler-splash.pc.in
README                           missing                          poppler-uninstalled.pc.in
README-XPDF                      poppler                          poppler.pc.cmake
TODO                             poppler-cairo-uninstalled.pc.in  poppler.pc.in
aclocal.m4                       poppler-cairo.pc.cmake           qt4
cmake                            poppler-cairo.pc.in              qt5
config.guess                     poppler-cpp-uninstalled.pc.in    splash
config.h.cmake                   poppler-cpp.pc.cmake             test
config.h.in                      poppler-cpp.pc.in                test-driver
config.sub                       poppler-glib-uninstalled.pc.in   utils
configure                        poppler-glib.pc.cmake
configure.ac                     poppler-glib.pc.in
prosody /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.24.2# cd
prosody /Users/lord# port upgrade poppler
--->  Computing dependencies for poppler
--->  Fetching archive for poppler
--->  Attempting to fetch poppler-0.24.2_0.darwin_12.x86_64.tbz2 from http://packages.macports.org/poppler
--->  Attempting to fetch poppler-0.24.2_0.darwin_12.x86_64.tbz2 from http://mse.uk.packages.macports.org/sites/packages.macports.org/poppler
--->  Attempting to fetch poppler-0.24.2_0.darwin_12.x86_64.tbz2 from http://lil.fr.packages.macports.org/poppler
--->  Configuring poppler
Error: Failed to configure poppler, consult /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.24.2/config.log
Error: org.macports.configure for port poppler returned: configure failure: command execution failed
Please see the log file for port poppler for details:
    /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/main.log
Error: Unable to upgrade port: 1
To report a bug, follow the instructions in the guide:
    http://guide.macports.org/#project.tickets
prosody /Users/lord#

[dbevans (David B. Evans)]

Please submit a new log file that shows the full build to the point it breaks including commands and results for the fetch and extract phases after doing the above. Error still doesn't make sense since file configure is, in fact, present.

That is,

sudo port clean --all poppler
sudo port upgrade poppler

then send the resulting log file

[lord@…]

Please find attached new log file.

[dbevans (David B. Evans)]

Ok, some progress. It got by the patch phase this time and failed in configure due to a missing dependency on libcurl. Please install port curl and clean and try again submitting a new log if it fails again.

sudo port install curl
sudo port clean poppler
sudo port upgrade poppler

[lord@…]

The problem is that curl seems to depend on poppler:

prosody /Users/lord# port install curl
--->  Computing dependencies for curl
--->  Cleaning curl
--->  Scanning binaries for linking errors: 4.7%
Warning: Error parsing file /opt/local/share/ghc-bootstrap/lib/ghc-7.0.4/HSffi.o: Error opening or reading file
--->  Scanning binaries for linking errors: 100.0%
--->  Found 406 broken file(s), matching files to ports
--->  Found 39 broken port(s), determining rebuild order
--->  Rebuilding in order
     webp @0.3.1
     enblend @4.0 +universal
     libgeoip @1.5.1
     git-core @1.8.4 +credential_osxkeychain+doc+pcre+python27
     openjpeg15 @1.5.0
     ntfs-3g @2013.1.13
     openjpeg @2.0.0
     netpbm @10.62.02
     s3fs @1.61
     sox @14.4.1
     wget @1.14 +ssl
     libsdl_image @1.2.12
     freetype @2.5.0
     fontconfig @2.10.95
     gd2 @2.1.0 +x11
     cairo @1.12.14 +x11
     ffmpeg @2.0.1 +gpl2
     gdk-pixbuf2 @2.30.0 +x11
     harfbuzz @0.9.21
     openmotif @2.3.4
     pango @1.36.0 +x11
     graphviz @2.34.0 +pangocairo+x11
     gnuplot @4.6.3 +aquaterm+luaterm+pangocairo+x11
     poppler @0.24.1
     gtk2 @2.24.21 +x11
     pdf2svg @0.2.1
     wireshark @1.10.0
     libglade2 @2.6.4
     ghostscript @9.10
     iulib @0.4-20120618
     opencv @2.4.6.1
     libusb-compat @0.1.4
     texlive-bin @2013 +motif+x11
     dvipng @1.14
     py27-cairo @1.10.0 +x11
     py27-pygtk @2.24.0 +x11
     py33-matplotlib @1.3.0 +tkinter
     qt4-mac @4.8.5
     libpano13 @2.9.18 +universal
--->  Computing dependencies for webp
--->  Cleaning webp
--->  Computing dependencies for enblend
--->  Cleaning enblend
--->  Cleaning libgeoip
--->  Computing dependencies for git-core
--->  Cleaning git-core
--->  Computing dependencies for openjpeg15
--->  Cleaning openjpeg15
--->  Computing dependencies for ntfs-3g
--->  Cleaning ntfs-3g
--->  Computing dependencies for openjpeg
--->  Cleaning openjpeg
--->  Computing dependencies for netpbm
--->  Cleaning netpbm
--->  Computing dependencies for s3fs
--->  Cleaning s3fs
--->  Computing dependencies for sox
--->  Cleaning sox
--->  Computing dependencies for wget
--->  Cleaning wget
--->  Computing dependencies for libsdl_image
--->  Cleaning libsdl_image
--->  Computing dependencies for freetype
--->  Cleaning freetype
--->  Computing dependencies for fontconfig
--->  Cleaning fontconfig
--->  Computing dependencies for gd2
--->  Cleaning gd2
--->  Computing dependencies for cairo
--->  Cleaning cairo
--->  Computing dependencies for ffmpeg
--->  Cleaning ffmpeg
--->  Computing dependencies for gdk-pixbuf2
--->  Cleaning gdk-pixbuf2
--->  Computing dependencies for harfbuzz
--->  Cleaning harfbuzz
--->  Computing dependencies for openmotif
--->  Cleaning openmotif
--->  Computing dependencies for pango
--->  Cleaning pango
--->  Computing dependencies for graphviz
--->  Cleaning graphviz
--->  Computing dependencies for gnuplot
--->  Cleaning gnuplot
--->  Computing dependencies for poppler
--->  Configuring poppler
Error: Failed to configure poppler, consult /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/work/poppler-0.24.2/config.log
Error: org.macports.configure for port poppler returned: configure failure: command execution failed
Please see the log file for port poppler for details:
    /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_poppler/poppler/main.log
Error: Unable to upgrade port: 1
Error rebuilding poppler
    while executing
"error "Error rebuilding $portname""
    (procedure "revupgrade_scanandrebuild" line 382)
    invoked from within
"revupgrade_scanandrebuild broken_port_counts $opts"
    (procedure "macports::revupgrade" line 5)
    invoked from within
"macports::revupgrade $opts"
    (procedure "action_revupgrade" line 2)
    invoked from within
"action_revupgrade $action $portlist $opts"
    (procedure "action_target" line 96)
    invoked from within
"$action_proc $action $portlist [array get global_options]"
    (procedure "process_cmd" line 93)
    invoked from within
"process_cmd $remaining_args"
    invoked from within
"if { [llength $remaining_args] > 0 } {

    # If there are remaining arguments, process those as a command
    set exit_status [process_cmd $remaining..."
    (file "/opt/local/bin/port" line 4857)
prosody /Users/lord#

[dbevans (David B. Evans)]

Looks like you have a lot of linking problems going on. Have you made some big change in your MacPorts installation recently, updated OS, Xcode, migrated to new computer, etc?

To see what's going on I would deactivate the current poppler port, then run rev-upgrade to see what's going on with the rest of the ports. If you do this:

sudo port deactivate poppler
sudo port -d rev-upgrade

and send the output, maybe we can see what's happening.

[lord@…]

I could not deactivate poppler as many other ports depened on it. I have recently updaded XCode (and Command Line tools) and perhaps this is the cause. I am really desperate here as I need some ports for my work and could not install them. Please help.

[lord@…]

I gave up and reinstalling whole ports tree.

[dbevans (David B. Evans)]

Probably the best solution in this situation. Marking as invalid since the problem appears not to be with poppler but with a corrupted MacPorts installation.